Scribd Logo
Upload

Welcome to Scribd!

  • 556 views

    A-A-59125-28 (Bus (Jumper) Connectors Styles Tbja, TBJB, TBJC, TBJD, Tbje, TBJF, TBJG, TBJH and Tbji)

    Uploaded by

    MAI_Quality
    The document describes commercial item description sheet A-A-59125/28 for bus (jumper) connectors styles TBJA through TBJI. It specifies dimensions and configurations for the connectors in Figure 1 and notes tolerances for dimensions. The General Services Administration has authorized this commercial item description to replace styles TBJA through TBJI in MIL-B-55164/28 for all federal agencies.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    A-A-59125-28 (Bus (Jumper) Connectors Styles Tbja, TBJB, TBJC, TBJD, Tbje, TBJF, TBJG, TBJH and Tbji)

    Uploaded by

    MAI_Quality
    556 views3 pages
    The document describes commercial item description sheet A-A-59125/28 for bus (jumper) connectors styles TBJA through TBJI. It specifies dimensions and configurations for the connectors in Figure 1 and notes tolerances for dimensions. The General Services Administration has authorized this commercial item description to replace styles TBJA through TBJI in MIL-B-55164/28 for all federal agencies.

    Original Description:

    TERMINAL BOARDS, MOLDED, BARRIER SCREW AND STUD TYPES AND ASSOCIATED ACCESSORIES

    Original Title

    A-A-59125-28 [Bus (Jumper) Connectors Styles Tbja, Tbjb, Tbjc, Tbjd, Tbje, Tbjf, Tbjg, Tbjh and Tbji]

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes commercial item description sheet A-A-59125/28 for bus (jumper) connectors styles TBJA through TBJI. It specifies dimensions and configurations for the connectors in Figure 1 and notes tolerances for dimensions. The General Services Administration has authorized this commercial item description to replace styles TBJA through TBJI in MIL-B-55164/28 for all federal agencies.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    556 views3 pages

    A-A-59125-28 (Bus (Jumper) Connectors Styles Tbja, TBJB, TBJC, TBJD, Tbje, TBJF, TBJG, TBJH and Tbji)

    Uploaded by

    MAI_Quality
    The document describes commercial item description sheet A-A-59125/28 for bus (jumper) connectors styles TBJA through TBJI. It specifies dimensions and configurations for the connectors in Figure 1 and notes tolerances for dimensions. The General Services Administration has authorized this commercial item description to replace styles TBJA through TBJI in MIL-B-55164/28 for all federal agencies.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    INCH-POUND

    A-A-59125/28
    26 September 1997
    SUPERSEDING
    MIL-B-55164/28B
    8 April 1991

    COMMERCIAL ITEM DESCRIPTION SHEET

    BUS (JUMPER) CONNECTORS


    STYLES TBJA, TBJB, TBJC, TBJD, TBJE, TBJF, TBJG, TBJH AND TBJI

    The General Services Administration has authorized the use of this commercial item description
    (CID) as a replacement for Styles TBJA, TBJB, TBJC, TBJD, TBJE, TBJF, TBJG, TBJH and
    TBJI of MIL-B-55164/28 for all federal agencies.

    The requirements for acquiring the product described herein shall consist of this sheet and CID
    A-A-59125.

    REQUIREMENTS:

    Dimensions and configuration: see Figure 1.

    Style A B C E G H
    MIN MAX MIN MAX
    TBJA .60 .66 .375 .25 .15 .015 .148 .161
    TBJB .69 .75 .437 .31 .20 .015 .158 .177
    TBJC .88 .94 .562 .37 .26 .015 .178 .208

    Figure 1. Dimensions and Configuration.

    AMSC N/A FSC 5940


    DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
    Source: http://www.assistdocs.com -- Downloaded: 2014-01-29T14:43Z
    Check the source to verify that this is the current version before use.
    A-A-59125/28

    Figure 1. Dimensions and Configuration (continued)

    2
    Source: http://www.assistdocs.com -- Downloaded: 2014-01-29T14:43Z
    Check the source to verify that this is the current version before use.
    A-A-59125/28

    NOTES:

    1. Dimensions are in inches.


    2. Tolerances on two place dimensions:
    + 0.010 to - 0.010
    3. Tolerances on three place dimensions:
    + 0.005 to - 0.005
    4. The drawing depicts only general design characteristics and is not intended to limit specific
    manufacturing processes.

    MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY:

    Custodian: GSA-7FXE
    Army - CR
    Navy - AS Preparing activity:
    Air Force - 85 Army - CR

    Reviewer: (Project No. 5940-1192-27)


    DLA - GS

    3
    Source: http://www.assistdocs.com -- Downloaded: 2014-01-29T14:43Z
    Check the source to verify that this is the current version before use.

    You might also like