The document describes two Ethernet-based distributed data acquisition and control (DA&C) systems - the ADAM-5000L/TCP and ADAM-5000/TCP. Both systems feature a 32-bit ARM CPU, Ethernet communication up to 100 Mbps, support for Modbus/TCP protocol, and remote configuration over Ethernet. The main differences are that the ADAM-5000L/TCP has 4 I/O slots for up to 64 points, while the ADAM-5000/TCP has 8 slots for up to 128 points. Both systems provide powerful and cost-effective solutions for automation applications.
The document describes two Ethernet-based distributed data acquisition and control (DA&C) systems - the ADAM-5000L/TCP and ADAM-5000/TCP. Both systems feature a 32-bit ARM CPU, Ethernet communication up to 100 Mbps, support for Modbus/TCP protocol, and remote configuration over Ethernet. The main differences are that the ADAM-5000L/TCP has 4 I/O slots for up to 64 points, while the ADAM-5000/TCP has 8 slots for up to 128 points. Both systems provide powerful and cost-effective solutions for automation applications.
The document describes two Ethernet-based distributed data acquisition and control (DA&C) systems - the ADAM-5000L/TCP and ADAM-5000/TCP. Both systems feature a 32-bit ARM CPU, Ethernet communication up to 100 Mbps, support for Modbus/TCP protocol, and remote configuration over Ethernet. The main differences are that the ADAM-5000L/TCP has 4 I/O slots for up to 64 points, while the ADAM-5000/TCP has 8 slots for up to 128 points. Both systems provide powerful and cost-effective solutions for automation applications.
The document describes two Ethernet-based distributed data acquisition and control (DA&C) systems - the ADAM-5000L/TCP and ADAM-5000/TCP. Both systems feature a 32-bit ARM CPU, Ethernet communication up to 100 Mbps, support for Modbus/TCP protocol, and remote configuration over Ethernet. The main differences are that the ADAM-5000L/TCP has 4 I/O slots for up to 64 points, while the ADAM-5000/TCP has 8 slots for up to 128 points. Both systems provide powerful and cost-effective solutions for automation applications.
Features ARM 32-bit RISC CPU 10/100Base-T auto-negotiation high-speed communication port Supports Modbus/TCP for easy integration Supports UDP event handling function Up to 100 m communication distance w/o repeater Allows remote configuration via Ethernet Allows concurrent access for 8 host PCs 4 I/O slots for up to 64 points and 8 I/O slots for up to 128 points data monitoring and control 1500 VDC isolation for Ethernet communication Built-in watchdog timer for system auto-reset Windows utility - I/O modules configuration and calibration - Network auto searching - Data stream setting - Current status monitoring and alarm trigger ADAM-5000/TCP ADAM-5000L/TCP Provides .NET Class LIB to develop applications
Introduction ADAM-5000L/TCP and ADAM-5000/TPC are both Ethernet-based I/O systems. Without a repeater, ADAM-5000L/TCP and ADAM-5000/TCP can cover a communication distance up to 100 m. This allows remote configuration via Ethernet and eight PCs can simultaneously access the data. The ADAM-5000L/TCP and ADAM-5000/TCP are the solutions for easy configuration and efficient management. An ideal and cost-effective solution for eAutomation architecture.
Specifications Power Input Unregulated 10 ~ 30 VDC
Software Control System .NET Class LIB CPU 32-bit ARM RISC Windows Utility Network setting, I/O configuration & calibration, data I/O Slots ADAM-5000L/TCP: 4 stream, alarm setting ADAM-5000/TCP: 8 Modbus/TCP OPC Server Memory Flash ROM: 512 KB RAM: 4 MB Protection Operating System Real-time OS Communication Line 3000 VDC LED Indicators Power (3.3 V, 5 V) Isolation CPU I/O Module Isolation 3000 VDC Communication (Link, Active, 10/100 Mbps, Tx, Rx) LAN Communication 1500 VDC Battery Overvoltage Protection Yes Power Reversal Yes Communications (Ethernet) Protection Comm. Distance 100 meters w/o repeater Comm. Protocol Modbus/TCP, TCP, UDP, IP, ARP General Data Transfer Rate Up to 100 Mbps Certifications CE, FCC class A Event Response Time < 5 ms Connectors 1 x DB9-M/DB9-F/screw terminal for RS-485 Interface 1 x 10/100Base-T (RJ-45) (communication) Wiring UTP, category 5 or greater 1 x DB9-F for RS-232 (internal use) 1 x Screw-terminal for power input Communications (Serial) 1 x RJ-45 for LAN Comm. Distance RS-485: 1.2 km (4000 feet) Dimensions (W x H x D) ADAM-5000L/TPC: 231 x 110 x 75 mm RS-232: 15 m ADAM-5000/TCP: 355 x 110 x 75 mm Comm. Protocol Modbus/RTU Enclosure ABS+PC Data Transfer Rate Up to 115.2 kbps Mounting DIN 35 rail, wall Interface 1 x DB9-M for RS-485 1 x DB9-F for RS-485 Environment 1 x DB9-F for RS-232 Humidity 5 ~ 95%, non-condensing Max. Nodes 12 (in RS-485 daisy-chain network for Remote I/O Operating Temperature - 10 ~ 70 C (14 ~ 158 F) connection) Storage Temperature - 25 ~ 85 C (-13 ~ 185 F) Power Power Consumption 4.0 W @ 24 Vdc (ADAM-5000L/TCP) Ordering Information (not including I/O modules) ADAM-5000L/TCP 4-slot Ethernet-based Distributed DA&C System 5.0 W @ 24 Vdc (ADAM-5000/TCP) ADAM-5000/TCP 8-slot Ethernet-based Distributed DA&C System (not including I/O modules)
Programmable Automation Controllers & Software
ADAM-5000L/TCP ADAM-5000/TCP
Wallmounting Hole DB9-M for RS-485 Diagnostic LEDs Snap Lock DB9-F for RS-485
DB9-F with RS-232 for Power Terminal Ethernet Port Industrial Plug-in Terminal Node ID Internal Use (Modbus/TCP) Connector Switch
Feature Details Communication Network Hardware Capacity & Diagnostics With a 32-bit RISC CPU, ADAM-5000/TCP and ADAM-5000L/TCP greatly enhances ADAM-5000/TCP and ADAM-5000L/TCP is designed with high I/O capacity and supports data processing performance and ability, especially in network communication. There all types of ADAM-5000 I/O modules. Providing 8/4 slots for any mixed modules, this is a standard RJ-45 modular jack Ethernet port on the ADAM-5000/TCP and ADAM- DA&C system handles up to 8/4 modules, providing 128/64 I/O points points (only 5000L/TCP's CPU board, and the field I/O modules are able to link to an Ethernet network four ADAM-5024s allowed). Different from other main units, the ADAM-5000/TCP and directly without any other converter or data gateway. The communication speed can be ADAM-5000L/TCP has not only higher I/O capacity, but also smarter diagnostics ability. auto-switched between 10 Mbps and 100 Mbps data transfer rates, depending on the There are eight indicators on the front case of the CPU module. Users can read the network environment. In addition, ADAM-5000/TCP and ADAM-5000L/TCP can be used system status clearly, which includes power, CPU, Ethernet link, communication active, as an Ethernet data gateway. It provides an RS-485 interface to integrate serial devices communication rate, etc. In addition, there are also Tx and Rx LEDs on the Ethernet port, supporting the Modbus/RTU protocol. indicating data sending and receiving.
Modbus/TCP Protocol Event Handling & Data Streaming
Modbus/TCP is one of the most popular standards used for industrial Ethernet networks. Though TCP/IP is the standard communication protocol for Ethernet, data transmission Using this communication protocol, ADAM-5000/TCP and ADAM-5000L/TCP is easy management is still a bottleneck when many clients are on the network at the same time. to integrate with any HMI software packages or user-developed applications which Therefore, the ADAM-5000/TCP and ADAM-5000L/TCP also supports the UDP protocol support Modbus. Users do not have to prepare a specific driver for the ADAM-5000/TCP to deal with regular data stream broadcasting and event/alarm triggering. These functions and ADAM-5000L/TCP when they install the DA&C system with their own operating will upgrade your system with intelligence and performance. application. It reduces required engineering efforts. Moreover, ADAM-5000/TCP and ADAM-5000L/TCP works as a Modbus data server as well. It allows eight PCs or tasks Isolated Communication to access its current data simultaneously, no matter if they connect from LAN, an intranet, High speed transient suppressors isolate the ADAM-5000/TCP and ADAM-5000L/TCP or the Internet. Ethernet port from dangerous voltage up to 1500 VDC power spikes and avoid surge damage to the whole system.
