Specifications DEVELOPMENT AND MANUFACTURING OF ELECTRONIC INSTRUMENTS

INSTRUMENTS
Series 912, 913 and 914 Series 922,923 and 925
3/4-Wire Relative Humidity Transmitter 2-Wire Relative Humidity Transmitter
Relative Humidity & Temperature Transmitters
Measuring range 0-100 %RH Measuring range 0-100 %RH
GUEMISA
Series 912,913,914,
Sta. Virgilia 29 Local.1A 28033 Madrid
Operating range 5-95 %RH Operating range 5-95 %RH Tfno.: 91 764 21 00 Fax.: 91 764 21 32
www.guemisa.com Email.:[email protected]
922,923 and 925
Output 0-1 V, 0-2.5 V, 0-5 V or 0-10 V Output 4-20 mA
q Current loop:
standard set at 0-10 V.
4-20 mA or 1-5 mA
( output current max. 1mA)

Accuracy @ 23C 2 %RH (10-90 %RH) Accuracy @ 23C 2 %RH (10-90 %RH)
q Voltage Output:
0-1 V, 0-2.5 V,
Stability 1 %RH, 1 year typ. (depending Stability 1 %RH, 1 year typ. (depending 0-5 V and 0-10 V
on environmental conditions) on environmental conditions)
q Accuracy 2 %RH
Temperature drift 0.03 %RH/C typical Temperature drift 0.03 %RH/C typical

Response time 10 sec. typ. (90 % of the change) Response time 10 sec. typ. (90% of the change) q Working already from
very low supply voltages
Power supply 14-35 Vdc for 0-10 V output Power supply 4.5-35 Vdc

supply voltage must be > 4 Volt q CE-approval

above max. output voltage TYPICAL APPLICATIONS

supply current typical 1.5 mA Energy management Food Processing

Bakery Products Grain Storage
Supply influence 0.003 %RH/V typical Supply influence 0.003 %RH/V typical
Climate control Meat Storage
Operating temperature -30..60 C Operating temperature -30..60 C Greenhouses Paper
HVAC Textiles
3/4-Wire Temperature Transmitter 2-Wire Temperature Transmitter Warehouses Fruit Storage
Clean Rooms Museums
Range 0..100 C or -20..+80 C Range 0..100 C or -20..+80 C
The relative humidity transmitter many advantages against 4-20 mA. Relative Humidity Transmitters can be
Output 0-1 V, 0-2,5 V, 0-5 V or 0-10 V Output 4-20 mA continuously measures the ambient First of all it gives less self-heating from combined with a temperature
humidity and provides an analog the housing, specially for small transmitter or a single Pt100 or Pt1000
standard set at 0-10 V. 1-5 mA (HT-914 / HT-923) output d i r e c t l y p r o p o r t i onal transmitters. This results in better element. Customized versions on
to the Relative Humidity. The accuracy and stability. Also the power r e q u e st. Optional are PV D F ,
(output current max 1 mA)
output signal is give n f rom supply can be smaller. We advice to wire mesh or stainless steel
Accuracy 0.2 C (-10..+50 C) Accuracy 0.2 C (-10..+50 C) 0-100 %RH. The 2-wire model work from lower supply voltages like filter to protect the s ens ors
provides a passive 4-20 mA or 1-5 mA 12 or 15 V instead of 24 V. The output in dusty environments, a
Power supply 14-35 Vdc for 0-5/0-10 V output Power supply 4.5-35 Vdc output requiring a current loop supply of the 3/4 -wire model has to be weather protection cap for Meteo
of 4.5-35 Vdc. We offer also 1-5 mA specified: 0-1 V, 0-2.5 V, 0-5 V or applications and a mounting flange.
4.5-35 Vdc for 0-1 V output current loop signals for this has 0-10 V. The unit is factory set at 0-10 V.

Supply influence 0.003 C/V typical Supply influence 0.003 C/V typical

Protection grade electronics IP65, protection grade sensor IP20, with dust filter IP50

All specifications are subject to change without prior notice

+ Supply Diagram Series + Supply Diagram Series

912-913-914 & Signal
922-923-925
RH + Signal RH
- Supply
& Signal

+Supply
Temp + Signal RTD RTD
& Signal
Temp
Common - Supply
& Signal

Rense Instruments BV Phone +31 162 470580 E-mail [email protected]

Rense Instruments BV Phone +31 162 470580 E-mail [email protected]
Burg. van Campenhoutstraat 61 Fax +31 162 437566 Internet www.rense.nl
NL-4921 KR MADE
Burg. van Campenhoutstraat 61 Fax +31 162 437566 Internet www.rense.nl
THE NETHERLANDS BrochureHT912GB050923 NL-4921 KR MADE
THE NETHERLANDS BrochureHT912GB050923
 Dimensions Rel. Humidity& Temperature Transmitters Selection guide Rel. Humidity & Temperature Transmitters

Multi-Purpose 912/922 3/4-Wire 2-Wire

140.0 mm ( 5.51")
(0-1 V, 0-2.5 V, (4-20 mA)
30.0 mm
( 1.18") Multi-functional probe for use up to 60 C. Description 0-5 V or 0-10 V)
Available as a 2-wire (4-20 mA) transmitter
Male connector HX-912-I-01 HX-922-I-01
or as 3/4-wire transmitter.
18.5 mm ( 0.73") 19.0 mm ( 3/4") Optional PVDF or wire-mesh filter for use in Male connector & Temperature Transmitter HT-912-I-01 HT-922-I-01
dusty environments. Immune to most reagent vapours.
Models combined with temperature transmitter or 1.5m PVC fixed cable + Pt100 1/3 DIN B sensor HT-912-I-03 HT-922-I-03
Pt100 or Pt1000 element.
1.5m PVC fixed cable + Pt1000 1/3 DIN B sensor HT-912-I-04 HT-922-I-04

65.0 mm ( 2.56") 50.0 mm ( 1.97")

Duct-Mount 912/922 3/4-Wire 2-Wire
44.0 mm ( 1.73")

M16x1.5 (0-1 V, 0-2.5 V, (4-20 mA)

17.0 mm
( 0.67")

Miniature Humidity- and/or Temperature Transmitter Description 0-5 V or 0-10 V)

for Duct-Mount. Available as a 2-wire (4-20 mA)
Duct-Mount Humidity Transmitter HX-912-I-02 HX-922-I-02
19.0 mm ( 3/4") transmitter or as 3/4-wire transmitter.
130.0 mm ( 5.12")

Optional PVDF or wire-mesh filter for use in Duct-Mount Humidity & Temperature Transmitter HT-912-I-02 HT-922-I-02
dusty environments. Immune to most reagent vapours.
18.5 mm ( 0.73")
Models combined with temperature transmitter or Duct-Mount Humidity Transmitter & Pt100 1/3 DIN B HT-912-I-05 HT-922-I-05
Pt100 or Pt1000 element.
Duct-Mount Humidity Transmitter & Pt1000 1/3 DIN B HT-912-I-06 HT-922-I-06

30.5 mm
( 1.20") 65.0 mm ( 2.55") Mini-Wall Mount 913/923 3/4-Wire 2-Wire
(0-1 V, 0-2.5 V, (4-20 mA)
Miniature Humidity- and/or Temperature Transmitter for Description 0-5 V or 0-10 V)
50.0 mm ( 1.97")
18.5 mm

Wall-Mount. Available as a 2-wire (4-20 mA or 1-5 mA)

(0.73")

Mini-Wall Mount Humidity Transmitter HX-913-I-06 HX-923-I-06

M-16 transmitter or as 3/4-wire transmitter.
Optional PVDF or wire-mesh filter for use in Mini-Wall Mount Humidity & Temperature Transmitter HT-913-I-06 HT-923-I-06
dusty environments. Immune to most reagent vapours.
44.0 mm ( 1.73")

We recommend for supply voltages higher than 15 V in

17.0 mm
( 0.67")

combination with 4-20 mA, to use our model HT-925 due

17.0 mm
( 0.67")

to less accuracy by self-heating from this small housing.

42.0 mm ( 1.65") 78.0 mm ( 3.07")

Wall Mount 925 2-Wire
Description (4-20 mA)
58.0 mm ( 2.28")

Humidity- and/or Temperature Transmitter

18.5 mm
( 0.73")

for Wall-Mount. Available as a 2-wire (4-20 mA) Wall Mount Humidity Transmitter HX-925-I-00
M-20x1.5
transmitter. Wall Mount Humidity & Temperature Transmitter HT-925-I-00
46.0 mm ( 1.81")
18.0 mm
( 0.71")
14.0 mm
( 0.55")

25.5 mm
84.5 mm ( 3.33")
Room 914 3/4-Wire 2-Wire
91.0 mm ( 3.58") ( 1.00") 68.0 mm ( 2.68")
(0-1 V, 0-2.5 V, (4-20 mA)
UP
Miniature Humidity- and/or Temperature Transmitter for Description 0-5 V or 0-10 V)
1 2 3 4 5 6 7 8

6.0 mm
91.0 mm ( 3.58")

84.5 mm ( 3.33")

68.0 mm ( 2.68")

Wall-Mount. Available as a 2-wire (4-20 mA / 1-5 mA)

( 0.24") 3.4 mm
( 1.33")
Room Humidity Transmitter HX-914-I-00 HX-914-I-01
transmitter or as 3/4-wire transmitter.
Room Humidity & Temperature Transmitter HT-914-I-00
60.0 mm ( 2.36")

4 x 3.8 mm ( 0.15")

Rense Instruments BV Rense Instruments BV

BrochureHT912GB050923 BrochureHT912GB050923