Hydraulic Excavator

RH 120-E

Service weight 282 t

Engine output 1008 kW
Face shovel (SAE 1:1) 17 m3
Backhoe (SAE 1:1) 15 m3
 The new RH 120-E: yet heavier, yet stronger, yet better
Average production 2,100 t/h.

In open pit mining the RH 120 is almost Up to 17 m3

a legend. More than 220 units are suc- face shovel or backhoeel
cessfully working in applications world- Depending on the working conditions,
wide. the RH 120-E can be equipped with
With the RH 120-E, O&K Mining con- shovel or backhoe attachment.
tinues this story of success by means of Together with the TriPower advantages
significant improvements and innova- the individually designed face shovel
tive developments. Comprehensive ex- ensures best penetration even in tough
perience originates from the large O&K and interlocked materials. An unusual
excavators RH 170 up to RH 400 which high filling degree is guaranteed with-
characterize the new design. out backspill. 100 sht trucks are
Operating weight and engine output loaded with four passes and peak pro-
were enlarged by 13 per cent, the un- duction up to 3100 t/h is possible.
dercarriage has been completely rede-
signed, an electronic-hydraulic servo
control was installed and the oil cool-
ing system has been further improved.
The service accessibility has also been
greatly improved.
The result: Larger bucket capacity, high-
er performance, easier controlling and
less wear and tear.
Maintenance effort has been decreased
to achieve long term availability of more The design of the attachment has been
than 90 per cent. optimized especially with the back-
hoe version. The cylinder diameters Conformity with the
were increased, to achieve 14 per cent EEC Machinery
Directive permits the
growth in digging forces, which is bene- attachment of the
ficial especially in direct digging oper- CE sign.

ations.
The RH 120-E is assigned for highest
performance. Bucket size and kine-
matics are the benchmark in this ex-
cavator class.
O&K was the first
German manufacturer
of excavators
to be certified for
compliance with
DIN EN ISO 9001.
The attachments steel construction is designed for
severe applications. All pivot points are supported
by large-dimensioned castings.

2
3
 A workplace that boosts productivity.
Including electronic-hydraulic servo control.

Ample space, easy control

The cabin of the RH 120-E has been
increased in width by another 300 mm
compared to its predecessor. It pro-
vides maximum space and comfort. The
operator has an excellent view over the
entire working area thanks to an eye
level of 6.1 m. The comfortable and
pneumatically cushioned seat is indi-
vidually adjustable to all functional and
ergonomic requirements.
The joystick control according SAE stand-
ard allows fast, safe and exact loading.
These conditions encourage the readi-
ness for a high level performance which
can be achieved over long periods with-
out stress and fatigue.

Fast service and high availability

via BCS
All operation and service data are
monitored and checked by the Board-
Control-System and can be displayed
on the screen. Therefore all important
information is clearly visible, any irre-
gularities are immediately detected and
the operator is alerted visually and aud-
ibly.

Unique fine control by electronic

hydraulic servo control
All servo functions are computer-con-
trolled for precise working if required.
Moreover the amount of hydraulic
hoses is reduced and trouble shooting is
eased.

4
Excellent accessibility for fast service

times. Together with the patented twin-

chamber hydraulic tank highest cooling
efficiency is guaranteed. This helps to
keep the hydraulic oil at an ideal tem-
perature even under extreme circum-
stances. Lower thermal load on the oil
and higher lifetime of the hydraulic
components are vital benefits.

Service-friendly modular design

Pump Managing System PMS
improves performance preserves The superstructure is consequently built
components up in modules. Fast access to all service
and maintenance points is provided by
The patented PMS ensures an optimized
the walk through engine compartment.
power adaption between the hydraulic
A retractable service station at the rear
power demand and power output of the
end assures convenient changing of all Retractable service
engines. Therefore overloading of the station at rear end
service fluids from the ground. The auto-
engines is avoided. PMS permanently Best accessibility to all
matic hydraulically driven central lubri- components (here:
compares measured operating data with
cation system is standard and serves engine and oil cooler)
set values and fine tunes pump flow for
all grease points without exception. A
ultimate performance, to achieve con-
compressive air system is no longer
stant engine speed.
necessary.
Additionally PMS combines automatic
revolution reduction, zero oil flow and
flow on demand.

Intelligent Cummins-engines
with diagnostic-system
The Cummins developed electronic en- 4 4 1

gine management CELECT provides low

operating costs with high life expect-
ancy at the same time. This system also 2
3
guarantees compliance to all existing 8
emission regulations world-wide. 6 9
5
8
7
Double independent oil cooling 3
2
system 1

The O&K hydraulic oil cooling is inde-

pendent from all main circuits. Two 11

individual thermostatically controlled

circuits for fan drive and cooler oil flow 10 12
provide optimized cooling even at idle

1. Diesel engines 2. Gearboxes with hydraulic pumps 3. Engine radiators 4. Hydraulic oil coolers
5. Hydraulic tank 6. Swing drives 7. Rotary distributor 8. Travel valves 9. Batteries 10. Operator's seat
11. BCS column 12. Auxiliary seat

5
 Unique TriPower geometry guarantees
exceptional performance

The patented O&K triangle for

with TriPower
maximum productivity
TriPower boosts production, eases oper-
ation and reduces wear.
The decisive advantages:
Increasing crowd force along the en- lifting distance
Only with TriPower
tire crowd distance
the boom momentum
Constant bucket angle at each boom remains constant over
the full lifting distance.
position and roll back limiter thus boom momentum Hence power is avail-
permanent high fill factor 100 % 50 %
able where it is re-
quired.
Automatic parallel bucket guidance
at all levels
Increased lifting momentum
Pressure free lowering of boom and
stick cylinders

Clear pipe work and SAE flange connections at all

high pressure hoses. The main valve blocks position
is on top of the boom and reduces hydraulic tubes
from the uppercarriage to the attachment. This de-
sign creates additional space on the superstructure
for outstanding access to slew gearboxes and rotary
distributor.

6
 New undercarriage
for tough conditions

More weight, more power For superior stability the RH 120-Es

The complete field experience with the centre of gravity is extremely low. The
larger O&K excavators has been engineers had a special interest in
considerable in the development of the preventing unnecessary service ex-
RH 120-E undercarriage. The flow of penditure. Idler and all rollers are
forces as well as the service friendliness lifetime-lubricated, thus the complete
are considerably improved by the undercarriage is nearly maintenance-
installation of unilateral bearings for the free.
travel gearboxes and their support in a
Encapsulated, powerful two-stage travel motors are
the key for mobility. Easy access to components due one piece casting. Less welding seams
to hinged doors. in highly stressed areas and the fully
hydraulic self-adjusting track tensioning
system have positive effects on life
expectancy. Track pad and link are
combined in one unit, face pressure on
the rollers and therefore wear is clearly
reduced.
Each crawler is driven by two powerful
hydraulic motors and can be controlled
separately. Two travel speeds secure
best adjustment to changing application
The O&K specific transmission of power avoids conditions. The new layout of the bottom rollers on the
RH 120-E is reflected in reduced face pressure. The
wear-intensive relative movement between track introduction of new materials and a high performance
and sprocket. lubricant improves lifetime.

7
 RH 120:
world-wide the no.1 in its class

Your Partner:

Terex Germany GmbH & Co. KG

Karl-Funke-Str. 36 D-44149 Dortmund
Phone ++49 231/922-3 Fax ++49 231/922-5800
E-mail: [email protected]

websites: www.terex-ok.com www.terex.com

M 105.2e/20904 Alterations without prior notice. The illustrations do not necessarily show the standard version of the machine. Printed on environment-friendly paper comprising 50 % recycled paper and
Printed in Germany Louisgang 50 % paper bleached with zero-percent chlorine.