Just the Technical Facts

The latest version of TIA-568 Rev. C allows for

greater design flexibility, cost savings and
future-proofing in the horizontal network.

TIA-568 Rev. C Impact on Optical Connectivity

What’s new? Standard” document is still in development with a 2009

The TIA-568 Rev. B standards have been updated to midyear expected completion date. The document is
include the following new standards: being updated to provide specific guidance relative to
CAT6a copper media.
• TIA-568 Rev. C.0 “Generic Telecommunications
Cabling for Customer Premises” What is the purpose of the TIA-568 Rev. C.0
standard?
• TIA-568 Rev. C.1 “Commercial Building TIA-568 Rev. C.0 facilitates the design and installation
Telecommunications Cabling Standard” of telecommunications cabling systems in any type of
customer environment. The document addresses system
• TIA-568 Rev. C.3 “Optical Fiber Cabling structure, topologies, distances, testing methods, per-
Components Standard” formance, polarity and installation, thus becoming the
foundation for cabling standards.
The TIA-568 Rev. C.2 “Balanced Twisted-Pair
Telecommunications Cabling and Components A primary design consideration included in the document
is that media distance is application specific for all cabling
subsystems. This means optical media horizontal dis-
tances are not restricted to 100 m. Numerous building
types such as corporate offices, manufacturing facilities,
universities, hospitals, airports, hotels, government facili-
ties and others require extended distances between active
equipment and the equipment outlet that benefits from
this standard. End-users now have the option of designing
premise networks in accordance with the detail guidance
of TIA-568 C.1 or the flexible guidance of TIA-568 C.0.

LAN-1135-EN | Page 1
Just the Technical Facts
TIA-568 Rev. C Impact on Optical Connectivity

• Saves building floor space to be used for other

applications

• Efficient utilization: HVAC systems, fire

suppression systems, racks, electronics, cable
management, cable trays, grounding locations, etc.

• Future-proof media

Does TIA-568 Rev. C.0 provide array-style

MTP® Connector polarity guidance?
Yes. The standard has incorporated the guidance from
ANSI/TIA-568-B.1-7-2006, Commercial Building
Telecommunications Cabling Standard, Part 1 –
General Requirements, Addendum 7 – Guidelines for
How does extending the horizontal distance Maintaining Polarity Using Array Connectors.
beyond 100 m benefit me?
Utilizing a telecommunications room with a 300 m Specific guidance is included on three sample methods
horizontal reach can serve an area up to 10 times greater identified as Method A, Method B and Method C. It is
than with the current 100 m horizontal channel length important to note that the standard states in paragraph
restriction. B.4.1 that “While many methods are available to estab-
lish polarity, this standard outlines sample methods that
Benefits include: may be employed for array cabling systems where the
• Minimizes telecom room space requirement connectors have one row of fibers only.” The word
“may” implies that alternate polarity methods, which are
• Reduction in installation costs, security costs and not discussed or included in the standard, are available
maintenance costs to accomplish the same results. Thus, the standard
shows three examples and recognizes that other valid
• Greater flexibility given to architect and building methods also exist, including the Corning Cable Systems
designers to account for telecom room requirements Universal polarity management (Figures 1 and 2).

✦ ✦
R L R L R L R L R L R L R L R L R L R L R L R L

12-Fiber Ribbon

Module with Module with Boot

MTP Connector MTP Connector Coupling/Housing Assembly

Ferrule

Key-up to Key-down Key-up to Key-down Guide Pins (2)

Dust Cap
Trunk with Standard MTP and
Ribbon-Twist MTP Connectors

Figure 1: Universal Polarity Figure 2: MTP Connector

LAN-1135-EN | Page 2
Just the Technical Facts
TIA-568 Rev. C Impact on Optical Connectivity

What about TIA-568 C.1? Finally, what about TIA-568 C.3?

The standard remains the same in structure and coverage Major changes include:
as TIA-568-B.1. The standard now recommends 850 nm • Increase in minimum OFL bandwidth for 62.5 μm
laser-optimized 50 μm multimode fiber and includes fiber (200/500 MHz·km)
guidance for telecommunications enclosures (TEs).
The standard continues to specify a maximum horizontal • Specifications for 850 nm laser-optimized,
cable length of 100 m, independent of media type. 50/125 μm multimode optical fiber
You will need to reference TIA-568 C.0 for horizontal
distances greater than 100 m to be standard’s compliant. • Specifications for indoor/outdoor cabling

• Specifications for multi-fiber array connectors (MTP®)

The standard utilizes OM multimode and OS single-

mode fibers nomenclature from IEC 11801 to define
detail fiber criteria (Table 1).

Table 1
Minimum Overfilled Minimum Effective
Maximum
Optical Fiber Modal Bandwidth- Modal Bandwidth-
Wavelength (nm) Attenuation
and Cable Type2 Length product Length product
(dB/km)
(MHz•km)1 (MHz•km)1
62.5/125 μm Multimode 850 3.5 200 Not Required
TIA 492AAAA (OM1) 1300 1.5 500 Not Required

50/125 μm Multimode 850 3.5 500 Not Required

TIA 492AAAB (OM2) 1300 1.5 500 Not Required
850 nm Laser-Optimized
850 3.5 1500 2000
50/125 μm Multimode
1300 1.5 500 Not Required
TIA 492AAAC (OM3)
Single-Mode
Indoor-Outdoor 1310 0.5 N/A N/A
TIA 492CAAA (OS1) 1550 0.5 N/A N/A
TIA 492CAAB (OS2)3
Single-Mode
Inside Plant 1310 1.0 N/A N/A
TIA 492CAAA (OS1) 1550 1.0 N/A N/A
TIA 492CAAB (OS2)3
Single-Mode
Outside Plant 1310 0.5 N/A N/A
TIA 492CAAA (OS1) 1550 0.5 N/A N/A
TIA 492CAAB (OS2)3

Notes:
1
The bandwidth-length product, as measured by the fiber manufacturer, can be used to demonstrate compliance with this requirement.
2
The fiber designation (OM1, OM2, OM3, OS1 and OS2) corresponds to the designation of ISO/IEC 11801 or ISO/IEC 24702.
3
OS2 is commonly referred to as “low-water-peak” single-mode fiber and is characterized by having a low attenuation coefficient in the vicinity of 1383 nm.

LAN-1135-EN | Page 3
Just the Technical Facts
TIA-568 Rev. C Impact on Optical Connectivity

notes |

Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA

800-743-2675 • FAX: 828-901-5973 • International: +1-828-901-5000 • www.corning.com/cablesystems
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products
without prior notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. MTP is a registered trademark of USConec, Ltd.
All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. © 2009 Corning Cable Systems.
All rights reserved. Published in the USA. LAN-1135-EN / April 2009

LAN-1135-EN | Page 4