Everlight Electronics Co., LTD.: 3mm Infrared LED

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

EVERLIGHT ELECTRONICS CO., LTD.

DEVICE NUMBER : DIR-020-002 REV : 2.0


ECN : PAGE : 1/8
3mm Infrared LED
MODEL NO : IR204

 Features :
High radiant intensity
Peak wavelength p=940nm
View angle 35
High reliability
2.54mm Lead spacing

 Description :
 Infrared Emitting Diode (IR204) is a high intensity diode, molded
in a blue transparent plastic package.
The device is spectrally matched with phototransistor, photodiode and infrared receiver
module.

 Applications :
Free air transmission system
Optoelectronic switch
Floppy disk drive
Infrared applied system
Smoke detector

CHIP
PART NO. LENS COLOR
MATERIAL

IR GaAlAs Blue
EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DIR-020-002 REV : 2.0
ECN : PAGE : 2/8
3mm Infrared LED
MODEL NO : IR204

 Package Dimensions :

 Notes :
1.All dimensions are in millimeter.
2.Protruded resin under flange 1.5 mm Max.
3.Lead spacing is measured where the lead emerge from the package.
4.Lens colorBlue transparent.
5.Above specification may be changed without notice. will reserve authority
on material change for above specification.
6.These specification sheets include materials protected under copyright of
corporation . Please dont reproduce or cause anyone to reproduce them without
consent.
7.When using this product , please observe the absolute maximum ratings and the
instructions for use outlined in these specification sheets. assumes no
responsibility for any damage resulting from use of the product which does not comply
with the absolute maximum ratings and the instructions included in these specification
sheets.
EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DIR-020-002 REV : 2.0
ECN : PAGE : 3/8
3mm Infrared LED
MODEL NO : IR204


 Absolute Maximum Ratings at TA = 25
Parameter Symbol Rating Unit Notice

Continuous Forward Current IF 50 mA


Peak Forward Current IFP 1.0 A
Pulse width=100s, Duty cycle=1
Reverse Voltage VR 5 V
Operating Temperature Topr -40 ~ +85 
Storage Temperature Tstg -40 ~ +85 
Soldering Temperature Tsol 260  4mm from mold
body less than
5 seconds
Power Dissipation at(or below) Pd 100 
25Free Air Temperature

 Electronic Optical Characteristics :


Parameter Symbol Min. Typ. Max. Unit Condition

4.0 5.6 ---- IF=20mA


Radiant Intensity Ee ---- 35 ---- mW/sr IF=100mA,tp=100s, tP/T=0.01
---- 390 ---- IF=1A,tp=100s, tP/T=0.01
Peak Wavelength P ---- 940 ---- nm IF=20mA
Spectral  45 nm IF=20mA
---- ----
Bandwidth
---- 1.2 1.5 IF=20mA
Forward Voltage VF ---- 1.4 1.85 V IF=100mA,tp=100s, tP/T=0.01
---- 2.6 4.0 IF=1A,tp=100s, tP/T=0.01
Reverse Current IR ---- ---- 10 A VR=5V
View Angle 2
1/2 ---- 35 ---- deg IF=20mA
EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DIR-020-002 REV : 2.0
ECN : PAGE : 4/8
3mm Infrared LED
MODEL NO : IR204

 Typical Electrical/Optical/Characteristics Curves












    
EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DIR-020-002 REV : 2.0
ECN : PAGE : 5/8
3mm Infrared LED
MODEL NO : IR204

 Typical Electrical/Optical/Characteristics Curves








    
    

 

 

 

 
         
EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DIR-020-002 REV : 2.0
ECN : PAGE : 6/8
3mm Infrared LED
MODEL NO : IR204

 Reliability Test Item And Condition


The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
NO. Item Test Conditions Test Sample Failure Ac/Re
Hours/ Size Judgement
Cycle Criteria
1 Solder Heat TEMP : 260 5  5 sec 22 PCs 0/1

IR 2
H : +85 30 min  0.8
VF 1.2
2 Temperature Cycle 50 cycle 22 PCs 0/1
5 min

L : -55 30 min

U :Upper
H : +100 5 min specification
limit
3 Thermal Shock 50 cycle 22 PCs L :Lower 0/1
10 sec specification
limit

L : -10 30 min

4 High Temperature TEMP. : +100 1000 hrs 22 PCs 0/1


Storage

5 Low Temperature TEMP. : -55 1000 hrs 22 PCs 0/1


Storage

6 DC Operating Life IF=20mA 1000 hrs 22 PCs 0/1

7 High Temperature / 85 / 85% R.H. 1000 hrs 22 PCs 0/1


High Humidity
EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DIR-020-002 REV : 2.0
ECN : PAGE : 7/8
3mm Infrared LED
MODEL NO : IR204

 Test Method For Power :


Condition : 
Test Item : 
   
Unit : mW/sr

 To Distinguish Intensity:
Condition:IF=20mA
Bin Number K L M N
Min 4.00 5.60 7.80 11.0
Max 6.40 8.90 12.5 17.6
EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DIR-020-002 REV : 2.0
ECN : PAGE : 8/8
3mm Infrared LED
MODEL NO : IR204

 Packing Specifications


 



 




 





 
 





 








 CPN : Customers Production Number


P/N : Production Number
QTY : Packing Quantity
CAT : Ranks
 HUE : Peak Wavelength
REF : Reference
  LOT NO : Lot Number
MADE IN TAIWAN : Production place

 Packing Quantity Specification


1. 1000 Pcs/1Bag4 Bags/1Box
2. 10 Boxes/1Carton

IR204

You might also like