Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    Composition

    Uploaded by

    Bassem Balghouthi
    The document summarizes the results of a well fluid characterization study for an additional flare. It reports that after clarification discussions, the best composition to use is from sample BHS2-4, with adjustments made to the gas-oil ratio and viscosity curve. The final well fluid composition and properties are provided in a table, listing the mole percentages and physical properties of each hydrocarbon component.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Composition

    Uploaded by

    Bassem Balghouthi
    6 views1 page
    The document summarizes the results of a well fluid characterization study for an additional flare. It reports that after clarification discussions, the best composition to use is from sample BHS2-4, with adjustments made to the gas-oil ratio and viscosity curve. The final well fluid composition and properties are provided in a table, listing the mole percentages and physical properties of each hydrocarbon component.

    Original Description:

    composition

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the results of a well fluid characterization study for an additional flare. It reports that after clarification discussions, the best composition to use is from sample BHS2-4, with adjustments made to the gas-oil ratio and viscosity curve. The final well fluid composition and properties are provided in a table, listing the mole percentages and physical properties of each hydrocarbon component.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views1 page

    Composition

    Uploaded by

    Bassem Balghouthi
    The document summarizes the results of a well fluid characterization study for an additional flare. It reports that after clarification discussions, the best composition to use is from sample BHS2-4, with adjustments made to the gas-oil ratio and viscosity curve. The final well fluid composition and properties are provided in a table, listing the mole percentages and physical properties of each hydrocarbon component.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Master Engineering Service Contract

    FEED for ADDITIONAL FLARE

    Well Fluid Characterization Study Report Rev.: 00 Status: AFD


    COMPANY Doc. No.: 8015-0151-EN02-22-250-PC-RP-00002
    Page: 64 of 66
    CONTRACTOR Doc. No.: P15IT03246-PRO-RE-250-002

    6 CONCLUSION
    After clarifications about well fluid characterization performed by Contractor, it was agreed to
    consider, as best tuned composition, the sample BHS2-4 composition:
    - with regression on the 1st stage + 3rd stage GOR (case C of regression);
    - with the adjusted design GOR of 88 Sm3/Sm3;
    - with the adjusted crude oil viscosity curve.

    Final well fluid composition and characteristics are summarized below.

    Reservoir Fluid Composition Pseudo Component Properties


    Component
    NBP MW liq density Tc Pc Vc ac factor
    %mol
    F kg/m3 F psig ft3/lbmol
    N2 0.344
    H2S 0.056
    CO2 1.258
    C1 30.062
    C2 9.410
    C3 7.078
    iC4 1.197
    nC4 3.856
    iC5 1.737
    nC5 2.193
    C6* 3.446 152.47 84.00 685.00 543.59 450.98 5.714 0.36919
    MCC5 0.289
    Benzene 0.090
    CC6 0.418
    C7* 2.421 202.65 96.00 722.00 608.98 425.18 6.394 0.39475
    MCC6 0.307
    Toluene 0.267
    C8* 2.654 244.40 107.00 745.00 659.42 400.28 7.030 0.42357
    E-benzene 0.098
    m-Xylene 0.128
    p-Xylene 0.128
    o-Xylene 0.148
    C9* 2.309 292.87 121.00 764.00 713.59 367.96 7.884 0.46461
    C10* 2.495 334.98 134.00 778.00 758.75 341.10 8.699 0.50321
    C11* 2.063 366.35 147.00 789.00 792.36 323.71 9.317 0.53172
    C12-C14* 4.813 419.71 174.10 810.07 850.28 300.25 10.343 0.57872
    C15-C18* 4.617 528.85 226.91 841.55 959.26 251.52 12.852 0.69343
    C19-C22* 3.241 633.83 282.05 863.99 1056.11 208.39 15.717 0.82175
    C23-C25* 1.768 716.34 330.47 880.74 1129.92 180.42 18.147 0.93077
    C26-C28* 1.375 782.99 372.99 892.50 1187.37 160.08 20.284 1.02613
    C29-C31* 1.179 845.84 415.56 902.22 1239.96 142.36 22.446 1.12184
    C32-C35* 1.375 914.28 463.99 912.81 1296.89 125.63 24.857 1.23002
    C36+* 7.180 1100.39 740.00 1105.00 1887.95 90.47 48.526 1.63551

    Table 6-1 Final well fluid composition and pseudo component properties

    You might also like