Manual TCP para Zoom80
Manual TCP para Zoom80
Manual TCP para Zoom80
Introduction This guide describes how to connect your GeoMax Zoom80 robotic
total station to a GeoMax E PS236 data collector using Long Range
Bluetooth. The Getac E PS236 is equipped with a long range
Bluetooth cap.
You will then learn how to create a GeoMax Zoom80 robotic total
station profile in FieldGenius, and connect the two devices via their
long range Bluetooth radios.
Current This guide was written using FieldGenius version 6.0.5.6 installed
Version on a PS236. If you are using a different version, your screens may
look differently than what is displayed in this guide.
Before you begin Have your GeoMax Zoom80 robotic total station and GeoMax
PS236 data collector with FieldGenius installed on it close by. You
will need them to complete this guide.
Turn on your First we must ensure that your Zoom80 has been configured to use a
Zoom80 Robot ZRT81 long range Bluetooth handle and able to connect to the Getac
E.
Tap on Programs.
Accept that.
You then connected your Zoom80 to the Getac E PS236 via the
Long Range Bluetooth handle.