Scribd
Upload
45 views1 page

r1 - Copy Revised

Dennis Springer has over 25 years of experience as a CNC programmer and machine room supervisor. He has worked at R&D Global Solutions as a consultant troubleshooting manufacturing operations and at Bishop Fixture & Millwork in various roles including engineering and design lead, machine room lead, and safety director. He is seeking a manufacturing position that utilizes his experience.

Uploaded by

api-380105892
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
45 views1 page

r1 - Copy Revised

Dennis Springer has over 25 years of experience as a CNC programmer and machine room supervisor. He has worked at R&D Global Solutions as a consultant troubleshooting manufacturing operations and at Bishop Fixture & Millwork in various roles including engineering and design lead, machine room lead, and safety director. He is seeking a manufacturing position that utilizes his experience.

Uploaded by

api-380105892
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Dennis Springer

2563, 180th Street Luck, Wi. 54853 | 715.472.4474 | E-mail [email protected]

Objective: Position in manufacturing utilizing 25 years experience as CNC Programmer and Machine
Room Supervisor.

Work Experience: R & D Global Solutions. Osceola, WI. 2015-2016

Consultant: Contract was for trouble shooting a manufacturing plant that had 49 employees.
-> Restructured entire CNC operations including 3 Komo CNC machines and 9 people over 2 shifts.
-> Set up and implemented all new tooling, processes and vendors.

Bishop Fixture & Millwork. Balsam Lake WI. 1997-


2015

Engineering & Design Lead: 10 years. Performed the duties of Programing, Detailing, Cut Billing,
and Value Engineering, Custom cabinets and Store fixtures for a 30+ million dollar a year company.
-> Worked closely with customers, architects, and sales.
-> Supervised up to 5 Drafters and Detailers.
-> Programmed all parts for 6 Heian CNC Routers and 2 CNC panel saws using Mastercam software.

Machine Room Lead: 6 years. Supervised up to 57 people over 3 shifts.


-> Coordinated work flow thru shop to meet deadlines and reduce conflicts.
-> Programmed all parts for 6 Heian CNC Routers.
-> Trained CNC operators in safe and productive procedures.
-> Purchased all tooling & sharpening for department.

Safety Director: 2 1/2 years. OSHA compliance, recordkeeping, weekly walk thrus of 5 buildings
and work with HR on training updates.
-> Reduced injuries by 60% over 2.5 years.

Accomplishments: Helped grow company from 4 to 30+ million dollars in sales.


-> Interviewed and hired over 100 people.
-> Our team did all the work on several national award-winning fixtures, kiosks and store fronts.
-> Graduate May 2019 Wisconsin Indianhead Technical College, assoisiates degree

You might also like