Scribd
Upload
39 views1 page

Dhaanish Ahmed Institute of Technology: Syllabus Coverage Daily Test Review Form

The document is a syllabus coverage daily test review form for the subject Fluid Mechanics and Machinery for a student named R. Chandraprakash. It indicates the topics covered in week 2 from July 7th to 13th included properties of fluids and flow characteristics. Part A of the test covered definitions of key fluid mechanics terms. Part B included two problems, the first calculating viscosity of a fluid between rotating cylinders, the second calculating the force to drag a plate through glycerin between two surfaces.

Uploaded by

Raj Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
39 views1 page

Dhaanish Ahmed Institute of Technology: Syllabus Coverage Daily Test Review Form

The document is a syllabus coverage daily test review form for the subject Fluid Mechanics and Machinery for a student named R. Chandraprakash. It indicates the topics covered in week 2 from July 7th to 13th included properties of fluids and flow characteristics. Part A of the test covered definitions of key fluid mechanics terms. Part B included two problems, the first calculating viscosity of a fluid between rotating cylinders, the second calculating the force to drag a plate through glycerin between two surfaces.

Uploaded by

Raj Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Dhaanish Ahmed Institute Of Technology

DT-1
Coimbatore, Tamil Nadu, India.

Syllabus Coverage Daily Test Review Form

Name: R.Chandraprakash,
Subject: CE6451 FLUID MECHANICS Class : II
AP/Mech
AND MACHINERY

Week: 2 From: 07-07-17 To : 13-07-17 Semester : III

Syllabus Topic Planned For Test

Topic Status
Units and dimensions- Properties of fluids- mass density, specific weight,
specific volume, specific gravity, viscosity, compressibility, vapor pressure, Completed
surface tension and capillarity. Flow characteristics

Part -A

1 State Newtons Law of viscosity


2 Differentiate ideal and real fluids
3 Define specific weight
4 What is Mass density
5 Define Absolute temperature
6 Define Compressibility and viscosity
7 What is bulk modulus
Part-B

A 12 cm diameter vertical cylinder rotates concentrically inside the another cylinder of


diameter 15.10 cm .Both cylinders are 25 cm high. The space between the cylinders is filled
1
with a liquid whose viscosity is unknown .If a torque of 12.0 Nm is required to rotate the
inner cylinder at 100 rpm. Determine the viscosity of the fluid
Two large plane surfaces are 2.4 cm apart. the space between the surfaces are filled with
glycerin .what force is required to drag a very thin plate of surface area 0.5 m2 between the
two large plane surfaces at a speed of 0.6 m/s, if:(i)the thin plate is in the middle of the two
2
plane surfaces
(ii) The thin plate is at a distance of 0.8 cm from one of the plane surfaces? Take the dynamic
viscosity of glycerin =8.110x10-1 Ns/m2

Staff In-charge HoD/Mech

You might also like