Scribd
Upload
520 views

Single Aisle Technical Training Manual T1 (IAE V2500) (LVL 2&3) General

This technical training manual provides instructions for maintenance personnel on performing external visits of aircraft with T1 IAE V2500 engines at levels 2 and 3. It states that the document is for training purposes only and not to be used as a reference. The manual describes checking the overall condition and structure of the aircraft for issues like damage or leaks, and inspecting components that can be seen from outside the aircraft before each originating flight. A warning is given to contact maintenance if a landing gear door is open before applying hydraulic power.

Uploaded by

ripan thakur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
520 views

Single Aisle Technical Training Manual T1 (IAE V2500) (LVL 2&3) General

This technical training manual provides instructions for maintenance personnel on performing external visits of aircraft with T1 IAE V2500 engines at levels 2 and 3. It states that the document is for training purposes only and not to be used as a reference. The manual describes checking the overall condition and structure of the aircraft for issues like damage or leaks, and inspecting components that can be seen from outside the aircraft before each originating flight. A warning is given to contact maintenance if a landing gear door is open before applying hydraulic power.

Uploaded by

ripan thakur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Single Aisle

TECHNICAL TRAINING MANUAL


T1 (IAE V2500) (Lvl 2&3)
GENERAL
This document must be used for training purposes only

Under no circumstances should this document be used as a reference

It will not be updated.

All rights reserved


No part of this manual may be reproduced in any form,
by photostat, microfilm, retrieval system, or any other means,
without the prior written permission of AIRBUS S.A.S.

AIRBUS Environmental Recommendation


Please consider your environmental responsability before printing this document.
Single Aisle TECHNICAL TRAINING MANUAL

GENERAL
Maintenance External Visit (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
UCE11021 - U48T1T0

T1 (IAE V2500) (Lvl 2&3) TABLE OF CONTENTS Feb 01, 2011


GENERAL Page 1
Single Aisle TECHNICAL TRAINING MANUAL

MAINTENANCE EXTERNAL VISIT (2)


EXTERNAL VISIT
The exterior inspection is done to make sure that the overall condition
of the aircraft and the components and equipment that can be seen are
safe for the flight.

NOTE: Note: The instructions for the checks that must be done are in
the FCOM.
The maintenance personnel usually does a full inspection before each
originating flight. If no maintenance personnel is available, a flight crew
member does the full inspection. The parking brake must be on during
the exterior inspection to let the flight crew do a check of the brake wear
indicators.
Do a check of the structure for impact damage.
Do a check for signs of fuel, oil or hydraulic leaks.

WARNING: If a landing gear door is open, contact the maintenance crew


before you apply hydraulic power.
UCE11021 - U48T1T0 - UM01D4000000001

T1 (IAE V2500) (Lvl 2&3) MAINTENANCE EXTERNAL VISIT (2) Feb 01, 2011
GENERAL Page 2
Single Aisle TECHNICAL TRAINING MANUAL
UCE11021 - U48T1T0 - UM01D4000000001

EXTERNAL VISIT

T1 (IAE V2500) (Lvl 2&3) MAINTENANCE EXTERNAL VISIT (2) Feb 01, 2011
GENERAL Page 3
AIRBUS S.A.S.
31707 BLAGNAC cedex, FRANCE
STM
REFERENCE UCE11021
FEBRUARY 2011
PRINTED IN FRANCE
AIRBUS S.A.S. 2011
ALL RIGHTS RESERVED

AN EADS COMPANY

You might also like