Design Beam For Shear & Torsion
Design Beam For Shear & Torsion
Design Beam For Shear & Torsion
AA/AFR 03-Nov-17 1
Check Date Rev.
HMM 03-Nov-17 0
PROJECT TITLE: DAMAC
LOCATION: RIYADH
DESIGN FOR SHEAR & TORSION (FORCES FROM ETABS ANALYSIS)
Calculations:-
1- Check for Shear & Torsion Section capacity(Check for crushing of concrete Compresion strut )
Torsional Moment Strength
= 1.95 N/mm2
= 3.91 N/mm2
Section is Ok
4- Tcrack(Cracked Torsion)
= 47.06 kN.m
50.0
kN.m
40.0
5- Torsion Comparison Table 30.0
20.0
Threshold Cracked Ultimate 10.0
Torsion Torsion Torsion 0.0
Thresho Cracked Ultimate
kN.m kN.m kN.m ld Torsion Torsion
8.9 47.1 35.0 Torsion TORSION
Torsion Considered 35.0
= 59.99 kN
Provide shear reinf
= 0.2085103213 mm2/mm/leg
Provide Min shear reinforcement if Vu > 0.5Vc 77.50434 kN Provide Min Shear Reinf ACI 11.4.6.1
= 0.55 mm2/mm/leg
Non-Combatibility Combatibility
Made Date Sheet
AA/AFR 03-Nov-17 3
Check Date Rev.
HMM 03-Nov-17 0
PROJECT TITLE: DAMAC
LOCATION: RIYADH
DESIGN FOR SHEAR & TORSION (FORCES FROM ETABS ANALYSIS)
Al = 789 mm2
fs = 280 N/mm2
Calculations:-
1- Check for Shear & Torsion Section capacity(Check for crushing of concrete Compresion strut )
Torsional Moment Strength
= 2.30 N/mm2
= 3.91 N/mm2
Section is Ok
4- Tcrack(Cracked Torsion)
= 111.09 kN.m
400.0
350.0
kN.m
300.0
5- Torsion Comparison Table 250.0
200.0
150.0
Threshold Cracked Ultimate 100.0
50.0
Torsion Torsion Torsion 0.0
Thresho Cracked Ultimate
kN.m kN.m kN.m ld Torsion Torsion
21.0 111.1 375.0 Torsion TORSION
Torsion Considered 111.1
= 215.14 kN
Provide shear reinf
= 0.4513090177 mm2/mm/leg
Provide Min shear reinforcement if Vu > 0.5Vc 149.8229 kN Provide Min Shear Reinf ACI 11.4.6.1
= 0.91 mm2/mm/leg
Al = 1907 mm2
fs = 280 N/mm2