Concrete ResultsTM

www.itwasia.com

DYNABOLT
Sleeve Anchors
DYNABOLT SLEEVE ANCHORS steel fabricators builders electricians plumbers

DYNABOLT Sleeve Anchors DECORATIVE HEAD

DynaBolt is a general purpose all steel medium duty through fixing for masonry and concrete. Our patented design sleeve anchor has a The decorative heads are available for aesthetically pleasing finish, together with all the benefits of DynaBolt TM Sleeve Anchors to
unique ability to pull-down and ensure a tight and secure anchoring of your fixture. securely anchor.

FOR FIXING TO UNIQUE PULL-DOWN CAPABILITY

Concrete, solid and hollow brick, masonry, natural stone. ENSURES SECURE CLAMPING
FEATURES The DynaBolt TM Sleeve Anchors pull-down capability ensures
Through fixing - no marking out and repositioning. the fixture is tightly clamped to the concrete surface. This unique
Fully assembled. patented feature collapses during tightening, allowing the typical
Variety of head styles. gaps that are left between fixture and concrete after initial anchor
Unique sleeve design collapses during tightening to provide insertion, to be completely eliminated.
pulldown onto fixture. SPECIAL RANGE
Integral nut and washer. A range of special anchors and accessories designed for specific applications.
INSTALLATION
APPLICATIONS 1. Use fixture as a template, 2. Remove debris by way 3. Continue tightening,
drill a hole to the correct of a vacuum or hand pump, allowing the sleeve to twist
Timber to concrete, form work, battens, bottom plates. diameter and depth. Clean compresses air, etc. Insert and pull down the fixture Eye Bolt & Hook Bolt Anchor Details
Services - ductwork, pipes brackets, cable trays, suspended hole thoroughly with brush. anchor tightly against fixture firmly onto the base material. (max. rec. working load 60kg)
and tighten with spanner.
ceilings. Anchor Anchor Thread Hole Part Pack
Metalwork - signs, hand rails, gates. size,d length,L size,db depth,hL no.(Zinc Quantity
(mm) (mm) (mm) Plated)
Light to medium duty loading.
8 31 M6 40 D08045K 100
MATERIALS (Hook)
Carbon Steel
Stainless Steel: AISI 316 8 40 M6 45 D08045X 100
(Eye)
SURFACE FINISH
Zinc Colbolt alloy plating with chromate conversion coating.
Hot dipped galvanized to AS1650-1989.

INSTALLATION AND PERFORMANCE DETAILS

INSTALLATION DETAILS MINIMUM DIMENSIONS WORKING LOAD LIMIT (kN) PART NO.
ANCHOR
Effective anchor Thread Hole diameter, Anchor effective Fixture hole Tightening Edge Anchor Substrate Tension, N a Stainless Pack
SIZE,d Zinc
length, Le size, d b do depth, h diameter, d f torque, T r Distance, e c spacing, a c thickness, b m Shear, Va Concrete compressive strength, fc steel A4 quantity
(mm) (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (mm) Plated
20Mpa 32Mpa 40Mpa (316)
34 20 55 60 40 1.6 2.1 2.3 DP06040 DP06040SS 100
6 M4.5 6 8 10 2.5
53 25 55 75 70 2.2 2.7 3.0 DP06060 DP06060SS 100
34 30 60 90 65 3.0 3.8 4.3 DP08040 DP08040SS 100
8 60 M6 8 35 10 15 60 105 100 4.0 3.3 4.2 4.7 DP08065 DP08065SS 50
86 35 60 105 100 3.3 4.2 4.7 DP08090 DP08090SS 50
34 35 70 105 70 3.8 4.8 5.4 DP10040 - 50
42 35 70 105 70 3.8 4.8 5.4 DP10050 DP10050SS 50
10 69 M8 10 45 12 35 70 135 110 6.4 4.6 5.9 6.6 DP10075 DP10075SS 50
96 45 70 135 110 4.6 5.9 6.6 DP10100 DP10100SS 25
117 45 70 135 110 4.6 5.9 6.6 DP10125 - 25
47 40 70 120 85 4.6 5.9 6.6 DP12060 DP12060SS 25
62 40 70 120 85 4.6 5.9 6.6 DP12070 DP12070SS 25
12 M10 12 15 55 7.9
90 50 75 150 120 6.1 7.7 8.6 DP12100 DP12100SS 20
118 50 75 150 120 6.1 7.7 8.6 DP12125 DP12125SS 20
51 55 85 165 95 7.5 9.5 10.6 DP16065 - 20
16 95 M12 16 65 19 85 100 195 140 10.5 9.4 11.9 13.3 DP16110 - 10
129 65 100 195 140 9.4 11.9 13.3 DP16140 - 10
70 70 105 210 120 10.7 13.6 15.2 DP20080 - 10
20 102 M16 20 85 24 165 130 255 170 15.6 13.1 16.6 18.6 DP20115 - 5
146 85 130 255 170 13.1 16.6 18.6 DP20160 - 5
For shear loads acting toward the edge(s) of the concrete, the above edge distances and spacings are not applicable, please consult Ramset Technical Consultant.
The factor of safety applied for steel is 2.2 in tension and 2.5 in shear.
The factor of safety applied for concrete is 3.0.