EVMSU - Vertical Multistage Pumps Product Catalog

www.pumpsebara.com
 Precision,
Quality,
Built like a Kata a Cutting-Edge

A Katana is a traditional Japanese sword made with

distinctive, longstanding expertise started in 300 A.D.
Katana are manufactured with care and precise attention
to detail. Only years of experience can provide the
ability necessary to build a masterpiece.

This is what we do with our pumps. Our 100 years

of Japanese expertise in our pump design and
manufacturing is the basis for developing
pumps with high quality and reliability as well
as cutting edge components and performance.

We look forward, not forgetting the past.

EBARA new vertical multistage pumps

model EVMSU are manufactured with the
highest standards of quality to achieve
reliable operating performance through
strict technical evaluation criteria and
control programs that involve the whole
manufacturing process. Features
n Standard NEMA motor sizes
We listened to the market. Our design is n Low axial thrust impeller enables long motor bearing life
unique. The EVMSU offers exceptional n Air vent in casing cover allows proper venting preventing air entrapment and dry run
value through cutting-edge solutions n Fill port in casing cover allows for water fill, as well as installation of sensors, gauges, and other measuring
to suit your application needs. devices
n Liner ring is a self-aligning, floating design constructed to prevent swelling at high temperatures
n Tungsten carbide lower pump bearings and sleeves are standard construction for all services, providing
maximum operating life
n Direct drive pump and motor shafts are keyed for positive, reliable power transmission with no adjustments
necessary
n Flexible floating outer casing allows for thermal expansion in hot water applications, preventing deformation
due to pressure fluctuations
n Square-edge four spline shaft provides positive location and drive of impellers, eliminating wear
n Dimensions & flanges installation is to market accepted dimensions for easy upgrade of existing installations
n Piping connection options include Fixed ANSI compatible flange, Oval flange, Loose ANSI compatible flange,
victaulic, and clamp connections
n Mechanical seal Silicon Carbide/Carbon/Viton mechanical shaft seal. Cartridge mechanical seal design
enables plug in replacement without disassembling the motor bracket

Note: Models EVMSU/EVMSUL 1-20 and EVMUG/EVMUL 32-64 certified to NSF/ANSI 61 & 372.
Certified to
NSF/ANSI 61, ANNEX G
6
 Main product features

2
1 TM
Innovative hydraulic solutions
Any motor, anywhere.

The Shurricane impeller reduces axial thrust load

Long life of the motor bearing

Patent application pending

4
2 Motor flexibility
Standard NEMA motor sizes can be fitted with no modifications thanks to low
axial thrust load.
Allows a wider range of motors to be used.

3
Piping connection options
Optional pipe connections are available depending on the application requirements
Dimensions & flanges - installation is to market accepted dimensions for easy upgrade in existing installations

Material 9V\UKHUNL Loose Flange Oval Flange Plug-In connection

ANSI Compatible ANSI Compatible (victaulic, clamp)

6 AISI304/
AISI316

4
Shaft seal solutions
Shaft seal material:
B: Resin impregnated carbon graphite
Q: Sintered silicon carbide
Qg: Silicon carbide with carbon graphite
Carbon or graphite inclusions with silicon carbide can be used as
reduce friction.

Conforms to EN12756 (ex DIN 24960)

5
Easy maintenance
The cartridge shaft seal enables replacement of the shaft
1 seal without disassembling the motor bracket
The spacer coupling allows easy maintenance without having
to remove heavy motors over 7 HP.

6
Smart plug solutions
3

Scan to Watch the Video!

Air ventilation plug WH[LYSSPUN Drain plug

& sensor plug
7 8
 Reliability is made
by numbers

1
Million
2
Times
3
Times

Cycles of the Higher test criteria than Lower thrust load

endurance test* nominal operating conditions* than common pumps

* for main components

:VS]L Axial thrust load in a pump is caused by unequal distribution

axial thrust load of pressure between the front and back shrouds of an
impeller. Axial thrust loading often leads to reduced life of the
the motor bearings.

General methods to absorb the axial thrust load include:

Increasing the motor bearing size or using enhanced
motor bearings.
Mounting additional ball bearings on the pump bracket.

EBARAs newly designed Shurricane impeller reduces

the axial thrust load with higher pump efficiency created by
the innovative hydraulic design of the impeller shrouds.

The EVMSU can accept commercial motors without any

TVKPJH[PVUZHUKPTWYV]L[OLTHPU[LUHUJLJ`JSLZVM
motor bearings.

Any motor, anywhere.

9 10
 Typical Applications Performance Range
60Hz

EVMSU 1-3-5-10-15-20
INDUSTRY BUILDING SERVICE WATER SUPPLY EVMU 32-45-64

32
45
Water treatment Pressure boosting Water treatment
reverse osmosis pressure boosting for buildings water treatment plants filtration
ultra-filtration pressure boosting for high rise water treatment plants transfer 64
water purification buildings/hotels
micro-filtration Pressure boosting
softening, ionizing and Sprinkler systems transfer from water treatment plants
demineralising systems (mains)
Fire fighting systems
swimming pools jockey pump Irrigation
separators 1 3 5 10 15 20
golf course / sport fields irrigation
District heating
Boiler feed Agriculture
steam systems Heat exchangers / fan heaters sprinkler irrigation
condensate systems Air conditioning systems drip irrigation
Wash and clean Heating systems
vehicle washing systems
industrial part washing
laundry systems
supply of liquids with acids and
bases
supply of chemical liquids
Chilling
handling of refrigerants for cooling
thermal control systems
industrial cooling
laser cooling
Machine tool 45 64
10 15 20
cooling lubricant supply for machine 5
3
tools 1 32
Pressure boosting
pressure boosting for industrial use
Food & beverage
food washing systems
bottle wash systems
Pharmaceutical industries
Marine applications
freshwater, deckwash, high fog and
fire fighting on ships

11 12
Sectional Drawing Product Specifications
EVMSU 1-3-5-10-15-20 EVMSU 1-3-5-10-15-20

PUMP
Version EVMSU EVMSUL
Nominal size 1 3 5 10 15 20 1 3 5 10 15 20

Performance HP 1/2 to 25 HP
range Capacity 2.9 to 132.1 gpm
Head 24.3 to 860 ft TDH
Type of liquid Clean water (for other clean liquids, consult factory)
Liquid Handling Maximum working pressure 230 / 360 PSI (530 / 830 ft TDH)
Liquid temperature range -22F to 248F (-30C to 120C)
Suction 1 1/4" 2" 1 1/4" 2"
Size
Discharge 1 1/4" 2" 1 1/4" 2"
1. Impeller AISI 304 (EN 1.4301) AISI 316 (EN 1.4401)
2. Intermediate casing AISI 304 (EN 1.4301) AISI 316 (EN 1.4401)
3. Liner ring AISI 304 (EN 1.4301) + PPS AISI 316 (EN 1.4401) + PPS
4. Bottom casing AISI 304 (EN 1.4301) AISI 316 (EN 1.4401)
5. Casing cover AISI 304 (EN 1.4301) AISI 316 (EN 1.4401)
AISI 304 (EN 1.4301) EVMSU 1-3-5, EVMSU 10-15-20 (depending on model)
13 11
6. Shaft AISI 316L (EN 1.4404) EVMSUL 1-3-5, EVMSUL 10-15-20 (depending on model)
AISI 329A (EN 1.4462) EVMSU / EVMSUL 5-15-20 (depending on model)
Key Component 7. Shaft sleeve bearing Tungsten carbide
Materials 8. Shaft Seal Silicon Carbide / Carbon / FPM (standard)
EPDM
9. O-ring
FPM
5 10. Outer casing AISI 304 (EN 1.4301) AISI 316L (EN 1.4404)
8
11. Motor bracket Cast Iron
12. Tie rod Galvanized steel 6.8 strength class ISO 898/1
2
9 up to 5 HP Die cast aluminium
13. Coupling
1 from 7 1/2 HP Cast Iron
14. Base Die cast aluminium
Oval flange up to 230 PSI
10
Round flange up to 230 PSI
(ANSI compatible raised face) from 230 PSI to 360 PSI
3
Pipe
12 Loose round flange up to 230 PSI
connection
(ANSI compatible raised face) from 230 PSI to 360 PSI

6 victaulic up to 230/360 PSI

7
Clamp up to 230/360 PSI
Type NEMA C/TC/TSC frame, TEFC enclosure
Speed 2-pole, 60 Hz, 3500 RPM
4 Motor Power Requirements 3 Phase, 230/460V or 208-230/460V - Single Phase, 115/230V
Direction of Rotation Clockwise when viewed from motor end
Motor Options Consult factory for optional motor types
14
Legend: Standard Options

13 14
www.pumpsebara.com
Your Local EBARA representative:
ENGINEEREDforPERFORMANCE

EBARA International Corporation

Fluid Handling Division
1651 Cedar Line Drive, Rock Hill, SC 29730
t (803) 327-5005 | f (803) 327-5097
www.pumpsebara.com
All specifications subject to change without notice.
2017 EBARA International Corporation, All rights reserved. rev. 0217