IDS-5042

Industrial 4-port RS232/422/485 to

2-port 10/100TX Device Server
ORing

5 Highlights
Redundant Dual Ethernet Ports: Recovery time < 10ms
Switch Mode Supported: Daisy Chain support to reduce
usage of switch ports
NAT-pass through: User can manage IDS-5042 through
NAT router
Industrial Device Server

Redundant Power Inputs: 12~48VDC on terminal block

Redundant multiple host devices: 5 simultaneous in
Virtual COM, TCP Server, TCP Client mode, UDP
Secured Management by HTTPS and SSH
Versatile Modes: Virtual Com, Serial Tunnel, TCP
Server, TCP Client, UDP
Event Warning by Syslog, Email, SNMP trap, and
Beeper
Various Windows O.S. supported: Windows NT/2000/
XP/ 2003/VISTA 32-bit

Features

Dual redundant Ethernet port support redundant IP table to prevent access from unauthorized IP
mode (Recovery time < 10ms) address
Ethernet switch mode enable Daisy Chain Congurable by Web-based and Windows utility
(DS-Tool)
Redundant 5 multiple host devices supported to
protect your industrial network 1KV isolation for PoE PD port of IDS-5042+
Versatile modes & event alarm by e-mail Dual redundant DC power inputs of terminal block
HTTPs & SSH protocol supported for secured Rigid IP-30 housing design
management
DIN-Rail and panel mounting enabled
NAT router pass through

Introduction
IDS-5042 is an innovative 4 port RS232/422/485 to 2 ports LAN redundant device server. To assure the
agility and security of critical data, IDS-5042 offers many powerful features for HW & SW redundant functions.
When the connection between master-link and LAN fails, IDS-5042 can automatically switch to another LAN
port within 10mS, and still guarantees a non-stop connection. IDS-5042 also supports switch mode, users
can use Daisy Chain to reduce the usage of Ethernet switch ports. Secondly, IDS-5042 can simultaneously
transfer data into 5 host PCs. This feature can assure all critical data that saved in different host PC to avoid
Ethernet break or host PCs failure. Thirdly, IDS-5042 provides dual redundant power inputs on DC power
jack and terminal block. IDS-5042 also provides NAT pass through function so that users are able to manage
IDS-5042 inside or outside the NAT router. It is easy for different IP domain users to use IDS-5042. In addition,
IDS-5042+ also support P.O.E. PD on ETH2. This feature is fully compliant with IEEE802.3af standard.
Therefore, IDS-5042 is one of the best communication redundant solutions for application of serial devices

5-14 Bring You The Future

DS-Tool

In practical operation of serial device servers, Windows utility (DS-Tool) is supported. This utility is very
helpful for you to manage and monitor all of industrial device servers on the industrial network.

ORing
5

Industrial Device Server

Redundancy 5 host devices NAT router Pass Through

Daisy Chain Switch mode

Monitoring and Conguration interface

Dimension

(Unit=mm)

Bring You The Future 5-15

 Specications

ORing Device Server Model IDS-5042 IDS-5042+

ORing

Physical Ports

5
10/100Base-T(X) Ports in RJ45
2
Auto MDI/MDIX
P.O.E.Present at ETH2
Power Device (IEEE 802.3af):
IEEE 802.3af compliant input interface
P.O.E. Feature - Power consumption: 8Watts max.
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min
Industrial Device Server

Serial Ports
Connector DB9 x 4
Operation Mode RS232 / RS422 / 4(2)-Wire RS485. Which can be congured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire) Data+, Data-,GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
LED indicators
PWR 1(2) / Ready:
Red On: Power is on and booting up.
Power indicator Red Blinking: Indicates an IP conict, or DHCP or BOOTP server did not respond properly.
Green On: Power is on and functioning Normally.
Green Blinking: Located by Administrator.
10/100TX RJ45 port indicator Green for port Link/Act at 100Mbps. Yellow for port Link/Act at 10Mbps.
Red: Serial port is receiving data
Serial TX / RX LEDs:
Green: Serial port is transmitting data
Power
Redundant Input power Dual DC inputs. 12-48VDC on 6-pin terminal block
Power consumption (Typ.) 5.5 Watts 5.5 Watts
Overload current protection Present
Reverse polarity protection Present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52(W)x106(D)x144(H) mm (2.05x4.17x5.67 inch.)
Weight (g) 678 g 682 g
Environmental
Storage Temperature -40 to 85C(-40 to 185F)
Operating Temperature -10 to 60C (14 to 140F)
Operating Humidity 5% to 95% Non-condensing

5-16 Bring You The Future

Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A

ORing
5
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EMS
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty 5 years

Industrial Device Server

Ordering Information

IDS-50 A B C

Code Denition Serial Port Number Ethernet Port Number POE Identication

Option - 4: 4 port - 2: 2 port -"+": P.O.E. PD present at ETH2

Model Name Description

Available IDS-5042 Industrial 4-port RS232/422/485 to 2-port 10/100TX Device Server

Model

IDS-5042+ Industrial 4-port RS232/422/485 to 2-port 10/100TX Device Server w/ 1-port PoE PD

Bring You The Future 5-17