Sauer-Danfoss Mcx103b Position Transducer
Sauer-Danfoss Mcx103b Position Transducer
MCX103B, D
Hall Effect Rotary Position Sensor
BLN-95-9040-2 Issued: July 1998
DESCRIPTION
FEATURES
Non-contact sensor withstands high shock and vibration Designed to withstand the mobile environment
- -40 to 85 C operating range
Input voltage adapted for microprocessor circuits - 95% relative humidity
- Meets off-highway vibration standards
Infinite resolution - Protected against static discharge, EMI and RFI
Long life
TECHNICAL DATA
ORDERING INFORMATION
SPECIFY
TABLE A.
THEORY OF OPERATION
A U shaped magnet is mounted to the input shaft of the MCX103. Mounted in a fixed position between the north and south
poles of the magnet is a linear hall effect senor. As the U shaped magnet is rotated, the changing magnetic flux lines cutting
through the hall effect sensor cause the output to change linearly from 25% to 75% of supply voltage for 90 Sensors. The output
changes from 30% to 70% of supply voltage for 45 sensors.
28,96 76,45
M6 X 1 THREAD X 14 (0.56) DP (4) (1.14)
12,29 (3.01)
(0.484) SEE TABLE A
15,14 5,1/6,35 (0.20/0.25) PIN
4,75 DIA 0,025 PIN (0.60) CCW
(0.1870.001) 15,14 (2)
(0.596)
4,83
(0.19)
3,05 (0.12)
A
45
19,05 17,55 (2) SENSOR
(0.750) (0.691) RANGE 57,15 DIA
MIDRANGE 9,47/9,49 DIA (0.373/0.374) (2.25)
+0,000
CW
28,45 - 0,127 DIA A
+0.000
3,175
( 1.120 - 0.005 DIA)
5,11/5,36 DIA THRU
(0.125) (0.201/0.211)
6,35 FLATS SEE TABLE A
(0.250)
VIEW
AA
PIN A (RED) +
1611B
Dimensions in Millimeters (Inches).
BLN-95-9040-2
2
BACK
DIMENSIONS, MCX103B WITH 90 SENSOR RANGE
7,11 (.28) STOP
5,1/6,35 (0.20/0.25) PIN
+0,000
28,45 - 0,127 DIA A
+0.000
( 1.120 - 0.005 DIA )
3,175 5,11/5,36 DIA THRU
(0.125) CW (0.201/0.211)
6,35 FLATS SEE TABLE A
(0.250)
VIEW
AA
PIN A (RED) +
1644A
DIMENSIONS, MCX103D
86,11 19,30
30 (3.39) (0.76)
2,79 RAD (8) CCW
15 (0.11)
9,65
85,85 DIA (0.38)
(3.38) 71,42 DIA 3,05
(0.12)
(2.812)
90
SENSOR
RANGE
57,15 DIA
(2.25) 9,47/9,49 DIA (0.373/0.374) MIDRANGE
2,79 (0.11)
SEE TABLE A
+0,000
34,8 - 0,127 DIA
8,74 FLAT CW
+0.000 (0.344)
PIN C (BLK) - SEE TABLE A (1.370 - 0.005 DIA )
PIN B (WHT) OUTPUT
PIN A (RED) +
1612B
BLN-95-9040-2
3
BACK
ENVIRONMENTAL SENSOR SUPPLY VOLTAGE
Vdc OUTPUT
bile equipment applications. The test includes vibration,
shock, EMI/RFI, short circuit, over voltage, humidity, high
pressure washdown, and chemical resistance. FULL FULL
CW CCW
SHAFT
ROTATION
0%
1614A
MOUNTING WIRING
The MCX103B has four 6M x 1M threaded holes on the face Electromagnetic and radio frequency interference (EMI/RFI)
of the input shaft end of the sensor. will be present in varying degrees in any environment that
has static electricity, power lines, radio equipment, solenoid
The MCX103D has a mounting flange, with four slotted holes. switching, etc. To avoid the harmful effects of EMI/RFI, use
braided (not foil) shield cables with a minimum of 75%
See the Dimensions drawings. shielding. Terminate the shield at both ends to the connector
shell with as short a length as possible.
CUSTOMER SERVICE
NORTH AMERICA EUROPE
RETURN TO
BLN-95-9040-2
4