Catalogue 2014 Eng Aquachem

2014 -2015
CATALOGUE
SWIMMING POOLS AND SPAS
FLUIDRA, S.A.
Avda. Francesc Maci, 60 Planta 20
08208 Sabadell (Barcelona) Spain
Tel. +34 93 724 39 00
Fax +34 93 724 29 29
[email protected]
www.astralpool.com
CATALOGUE 2014 -2015

Infinite, unique experiences...
Pools for sharing emotions
Eco-friendly pools for staying green
Pools for relaxing
Pools for keeping fit

Printed on paper from sustainable forests. Fluidra collaborates on the environmental protection.
Impreso en papel procedente de bosques sostenibles. Fluidra colabora en la proteccin del medio ambiente.
The pool brand
Our products are found in over 170 countries. We have
over 40 years of experience. Over 40,000 professionals
and 2,000,000 pools use one of our 15,000 products.
Completely innovative and sustainable solutions. For all of
these reasons and many more, our systems and components
for public and private pools are and will continue to be
leaders the world over.
We set the benchmark for professionals and private

home owners. Let AstralPool surprise you once again.
And remember: when you see our brand, you are looking
at the pool brand.
... for infinite, unique people
1
LumiPlus Design
LED lighting
Quality and efficiency
delivered in the very
best design
LumiPlus
LED RBG 1.11 technology with remote control

Brighten up your pool
Electronic pool cleaner

The Formula 1
of all electronic
pool cleaners

Your first choice
of cleaner,
100% design
Ultra 250
The pool cleaner
for commercial
pools
Filter pump
The latest in variable
speed pumps for pools
Dual Pure
Water treatment
Salt chlorination
and pH regulation
Neolysis
Advanced water treatment
The ideal combination
for top water quality:
Ultraviolet technology
and electrolysis
Active Clear Glass

Filter medium
The new activated
glass filter material
Angel Solar
Solar shower
The best design
at your fingertips
Evo
Air/water heat pump
Heats your pool in the
cheapest possible way
KIVU
Filter pump
The most efficient
plastic pump for high
flow rates on the market
Norm
Recessed materials
Safety in commercial
pools
Products to enjoy Safe product Unique design Product for total Sustainable Quality Electronic Until Recommended for
more free time confort pool cleaner end of stocks commercial pools
AstralPool products with a built-in MODBUS protocol
Electrolysis for private pools: The Vrac automatic multiport valve system
Elite, Smart +, Smart + PH
Smart control panel Electrolysis for public pools:

ECO salt/ProCHLORE Salt
Modbus
Communications protocol
The first step for

automatically
LumiPlus modulator-control system APHeat II heat pump
controlling your pool
Why do we implement MODBUS
in AstralPool products?
Because by including a device with the
standard MODBUS communications
protocol, it is possible to connect
AstralPool products to other control
devices already on the market.
GPIO Regulation device and controller
AstralPool is a member of the MODBUS Organization Inc.

Modbus5 is a registered trademark of the MODBUS Organization, Inc.
Automatic cover Atomatic pool cleaners
Reduces evaporation by up to 65%. Saves 20% of water consumption in filter
Saves 25% of heat energy. backwash.
- 65% -20%
LED lighting Variable speed pump

Save up to 92% in electricity costs. Save up to 85% in electricity consumption.
Reduce by 75% sound level.
-92%
-75%
- 85%
Eco H2O Eco Energy Eco Sound
Our
commitment
to a
sustainable
pool
Pre-filter Glass media

50% reduction on water consumption
Save 25% on water consumption
when washing the filter.
on filter backwash.
- 50%
-25%
AstralPool Mac Simple details for

Reduces power consumption by
up to 50%. a great Future.
Saves up to 90% on chemical
products. Respect for the water and its rational use
Reduces backwashing by 50% is the core philosophy of our Group.
in comparison with pools with
conventional control systems. Our commitment to sustainability has let
us to create a specific line of sustainable
- 50% products.
- 50%
New online tools on the
AstralPool website
Pool configurator
AstralPool has launched a pool
configurator with over 15,000 different
combinations
Fully equipped pools can be created in 12 steps.
Includes detailed information about all of the products available, as well as
how to save energy and water.
No need to introduce data as the configurator gives a detailed summary of
the pool chosen free of charge.
Heat pump configurator

AstralPool offers you heat pump solutions for every type of pool
in whatever location. Use the application for advice about the model
that best suits your pool.
VIRON energy efficiency

calculator
AstralPools VIRON variable speed pump delivers the most efficient solution for
pumping pool water. The speed at which the pump operates can be adjusted
according to the needs of each pool and user. By increasing and decreasing the
pumps speed, not only are its speed and flow rate changed, so too is power
consumption.
The application makes it possible to calculate the annual savings made by
installing a VIRON variable speed pump in comparison with conventional
single speed pumps found on the market.
www.astralpool.com
Discover a new leader in the world of pools and wellness with AstralPool: the pool brand. Infinite, unique experiences for people, end users and professionals,
who are also infinite and unique. Performance, solutions and new features that pave the way to be followed. What are you waiting for to discover them?
Welcome to the infinite pool experience.
Presentation
AstralPool is the leading brand name in the world of the swimming pool: private pools, public AstralPool means effort, self-improvement, being there... the trust inspired by a long track
swimming baths, competition pools, water parks, spas, wellness centres and hydrotherapy record.
facilities, the physical and chemical treatment of water, the dcor of such facilities, the design
of both indoor and outdoor pools, their renovation, modernisation and automation, or AstralPool, with over 40 years of experience in the market, belongs to the Fluidra Group, a
making a pool more sustainable. Whatever you may need, AstralPool has got it! AstralPool Spanish multinational specialised in the development of applications for the sustainable use
also means approachability, being close at hand for our clients; innovation, coming up with of water for pool and wellness, water treatment, irrigation and fluid handling facilities.
ideas that mirror our times; reliability, delivering services on time and excellent quality.
AstralPool
Distribution network
The AstralPool trademark is sold in over 170 countries. It directly sells its products in 32 countries through a network of companies owned by Fluidra comprising a total of 150 subsidiaries,
warehouses and branch offices.
Australia, Austria, Belgium,

Brazil, Bulgaria, Chile, China,
Colombia, Cyprus, Czech
Republic, Denmark, Egypt,
France, Germany, Greece,
Hungary, India, Indonesia,
Italy, Jordan, Malaysia,
Mexico, Montenegro, Morocco,
Nigeria, Poland, Portugal,
Romania, Russia, Serbia,
Spain, Singapore, South Africa,
Sweden, Switzerland, Thailand,
Turkey, United Arab Emirates,
United Kingdom, United States.
Products: Trademark sold in: Customers:

over 15,000 references over 170 countries over 20,000
Over 40,000 professionals and 2,000,000 pools use one of our 15,000-plus products AstralPool deliver sustainable responses that enable users to save water and look after
each year. Over and above functionality, the products and solutions offered by the environment while they enjoy their pools.
E M P R E SA AS OC IADA
Debido a las constantes modificaciones

SPATA puede que alguna fotografa
AS O C I AC I N E S P A O L A no se corresponda exactamente
AS OC IAC ION DE FAB R IC ANT E S D E I N D U S T R I AL E S Y T C N I C O S con el producto
DE E QUIP OS P R ODUC T OS QUIMIC OS D E P I S C I N AS E I N S T AL AC I O N E S The Swimmingpool and Allied
Y C ONS T R UC T OR E S DE P IS C INAS D E P O R T I VAS Trades Association LTD F E D E R AC I N D E AS O C I AC I O N E S
D E FAB R I C AN T E S D E E Q U I P O S
Y C O N S T R U C T O R E S D E P I S C I N AS
S AU N AS Y S P AS
BUNDESVERBAND
S C H W I M M B A D
& W E L L N E S S E. V.
1 point
How to make the best of your
of sale
2 How to create your AstralPool
space
We can deliver fast, cheap and attractive solutions TOGETHER with you we look at and decide on the best place
for your point of sale: to put this special area in your store.
TOGETHER we will enjoy the benefits derived from the
Impressive POS programme.
(Display racks, catalogues, banners, etc.)
Product ranges in line with the latest market

trends.
Marketing tools for attracting footfall to your store.

Our Official Partners occupy a privileged position on our website
in the section Where to buy.
http://www.astralpool.com/sites/en/Individuals/
where_to_buy.html
We have Official Partners in 12 countries

http://www.astralpool.com/sites/en/Individuals/
where_to_buy.html?provincia=Girona&pais=Spain
What does it
mean to be
an Official
Partner?
An EXCLUSIVE win-win relationship
between YOU and US.
Assistance in increasing and

diversifying your sales.
Special benefits and advantages.

Conversion table
Length: m in ft
Meter (m) 1 39.37 3,281
Inch (in) 0.025 1 0.083
Foot (ft) 0.305 12 1
Surface: m2 in2 ft2 cm2
Square meter (m2) 1 1,150.39 10,764 10.000
Square inch (in2) 0.000645 1 0.0069 6.45
Square foot (ft2) 0.093 144.036 1 929.03
Square centimetre (cm2) 0.0001 0.155 0.00107 1
Volume: m3 UK gal US gal l
Cubic meter (m3) 1 219,969 264,172 1000
Imperial gallon (UK gal) 0.0045 1 1,201 4,546
U.S. gallon (US gal) 0.0038 0.833 1 3.785
Litre (l) 0.001 0.22 0.264 1
Velocity: m/s in/s ft/s m/h
Meter/second (m/s) 1 39.37 3,281 3600
Inch/second (in/s) 0.025 1 0.083 91.44
Foot/second (ft/s) 0.305 12 1 1097.28
Meter/hour (m/h) 0.00028 0.011 0.00091 1
Filtration velocity: m3/m2.h USgal/ft2.min UKgal/ft2.min ft3/ft2.min
(m3/m2.h) 1 0.409 0.341 0.055
(US gal/ft2.min) 2,445 1 0.833 0.134
(UK gal/ft2.min) 2,936 1,201 1 0.158
(ft3/ft2.min) 18,322 7,474 6,311 1
Mass: kg g lb
Kilogram (kg) 1 1000 2,205
Gram (g) 0.001 1 0.0022
Pound (lb) 0.454 453.59 1
Pressure: Pa bar kg/cm2 psi
Pascal (Pa) 1 0.00001 0.00001 0.00014
Bar (bar) 100000 1 1,019 14,504
Kilogr. per square cents 98100 0,981 1 14,228
Pounds per square inch (psi) 6894.76 0.0689 0.07 1
Energy: J kWh cal kcal
Joule (J) 1 2.77 10-07 0.239 0.00024
Kilowatt per hour (kHh) 3600000 1 860421 861.244
Calorie (cal) 4.186 1.16 10-06 1 0.001
Kilocalorie (kcal) 4186 0.0012 1000 1
Power: kW HP BTU/h
Kilowatt (kW) 1 1.341 3412.14
Horse power (HP) 0.746 1 2544.43
British Thermal Unit/hour (BTU/h) 0.00029 0.00039 1
Flow: m3/h US gall/min UK gall/min l/s
Cubic meters/hour (m3/h) 1 3,667 4,403 0.278
US gallon/minute (US gall/min) 0.273 1 1.201 0.076
UK gallon/minute (UK gall/min) 0.227 0.833 1 0.063
Litres/second (l/s) 3.6 13,198 15.85 1
Temperature: C F K
Degree celsius (C) 1 [(9/5)xC] + 32 C + 273.16
Fahrenheit (F) (5/9)x(F - 32) 1 n.a
Kelvin (k) K - 273.16 n.a 1v
Pipe dimensions and water flow

DN D Inches Water flow (m3/h) depending on water velocity
mm mm Suction (1.2 m/s) Discharge (2 m/s)
15 20 1/2 1 1.6
20 25 3/4 1.6 2.7
25 32 1 2.7 4.4
32 40 11/4 4.4 7.3
40 50 11/2 7.5 12.5
50 63 2 11 18.4
65 75 21/2 15.7 26.1
80 90 3 22.3 37.1
Swimming pool equipment
General installation diagram
1 Filter 7 Automatic pool cleaner 13 Chlorine dispenser

2 Pump 8 Ladder 14 Automatic pool cover
3 Multiport valve 9 Underwater light 15 Safety fences
4 Skimmer 10 Control panel box 16 Pool shell
5 Water level regulator 11 Hydrospin
6 Inlet nozzle 12 Heat exchanger
Filter and pump selection table
Pool volume Turnover Filtration speed Filter Connections Pump Sand

m3 h m3/h/m2 mm mm inch HP Kg
40 8 50 350 50 11/2 0.3 40

40-50 8 50 400 50 11/2 0.5 60
50-60 8 50 450 50 11/2 0.5 70
60-75 8 50 500 50 11/2 0.5 100
75-90 8 50 560 50 11/2 0.75 130
90-115 8 50 600 50 11/2 1 160
115-130 8 50 650 50 2 1 175
130-170 8 50 750 50 2 1.5 300
170-200 8 50 800 50 2 2 330
Index
A b oAbove
v e groundg pool
r o ladders
u n d p o o l l a d d e r s 28
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A c c Access
e s ladders
s lforadisabledd d persons
e r s f o r d i s a b l e d p e r s o n s 34 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A c c Accessories
e s s ofor rcovers i e s f o r c o v e r s 292
........................................................................................................................................................................
A i r Airbblowers
l o w e r s 351
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A i r Air/water
/ w a chillers
t e rwith ccentrifugal
h i l ventilator,
l e r sfor indoor
w iinstallation
t h c e n t r i f u g a l v e n363t i l a t o r , f o r i n d o o r i n .....................................................................................
A i r Air/water
/ w a heat t epumps,
r hfor eindoora tinstallation
p u m p s , f o r i n d o o r i n s t a360l l a t i o n .............................................................................................................................
A i r Air/water
/ w a heat t epumps,
r hfor eoutdoor
a t installation
p u m p s , f o r o u t d o o r i n s t356a l l a t i o n ..........................................................................................................................
A i r Air/water
/ w a heat t epumpsr h witheaxial
a ventilator,
t p ufor m p installation
indoor s w i t h a x i a l v e n t i l361a t o r , f o r i n d o o r i n s t a .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A i r Air/water
a ventilator,
t p ufor m p sinstallation
outdoor w i t h a x i a l v e n t i l362a t o r , f o r o u t d o o r i n s t .....................................................................................
A i r Air/water
a ventilator,
t p ufor m p sinstallation
outdoor w i t h a x i a l v e n t i l366a t o r , f o r o u t d o o r i n s t .....................................................................................
A l g Algicide
i c i d e 170
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A n cAnchoring
h o r sockets
i n g s o c k e t s 490
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
" A q "Aquarmony"
u a r munderwatero n y "musical u system
n d e r w a t e r m u s i c a l s y s t e 260 m ..................................................................................................................................
A s t AstralPool
r a l PBikeo o l B i k e 59
......................................................................................................................................................................................
A s t AstralPool
r a l PSignature
o o llaminated S i filters
g n a t u r e l a m i n a t e d f i l t e r s125 ...........................................................................................................................................
A s t AstralPool
r a l PSignature
o o lornamentalS i gwatern features
a t u r e o r n a m e n t a l w a t e r 60 f e a t u r e s ..........................................................................................................................
A s t AstralPool
r a l PSignature
o o lSalt electrolysis
S i g n& pHa control
t u r e S a l t e l e c t r o l y s i s 186& p H c o n t r o l ....................................................................................................................
A s t AstralPool
r a l PSignature
o o lSelf-priming
S i gpumpsn a t u r e S e l f - p r i m i n g p u m147 p s .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A s t AstralPool
r a l PSignature
o o lShowers S i g n a t u r e S h o w e r s 48
...........................................................................................................................................................
A u t Automatic
o m acovers t i c c o v e r s 298
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A u t Automatic
o m aregulation
t i c andr control
e g equipment
u l a t i o n a n d c o n t r o l e q u i 461 p m e n t .............................................................................................................................
A u t Automatic
o m asuction t i ccleaners s u c t i o n c l e a n e r s 216
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A u t Automatic
o m asuction t i ccleaners s for
u commercial
c t i o poolsn c l e a n e r s f o r c o m m e r227c i a l p o o l s ......................................................................................................................
B l o Blow-moulded
w - m o sand u l filters
d e d s a n d f i l t e r s 117
..............................................................................................................................................................
B o bBobbin
b i wound
n w o u n d f i l t e r s
filters 401
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B r o Bromine
m i nDisinfection
e D i s i n f e c t i o n 169
.........................................................................................................................................................................
B r u Brushes
s h e s 235
.................................................................................................................................................................................................
C a r Cartridge
t r i dfiltersg e f i l t e r s 113
...................................................................................................................................................................................
C e nCentrifugal
t r i fpumps u g a l p u m p s 435
.............................................................................................................................................................................
C h l Chlorine
o r i disinfectants
n e d and i snoni comburent
n f e chlorine
c t a n t s a n d n o n c o m b u r165e n t c h l o r i n e ..................................................................................................................
C h l Chlorine
o r i multi-action
n e mdisinfectants
u l t i - a c t i o n d i s i n f e c t a n t s 166 ..............................................................................................................................................
C l e Cleaners
a n e r s 172
................................................................................................................................................................................................
C l e Cleaning
a n i kitsn g k i t s 237
........................................................................................................................................................................................
C o l Collector
l e c pipet oforrvalvepmanifold
i p e f o r v a l v e m a n i f o l d 321
....................................................................................................................................................
C o l Colour
o u chart
r for c spas
h a r t f o r s p a s 324
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C o mCompact
p a filtration
c t for f spas
i l t r a t i o n f o r s p a s 342
...............................................................................................................................................................
C o mCompact
p a housings
c t with h oinneru assembly
s i n g s w i t h i n n e r a s s e m b l y 131 .......................................................................................................................................
C o mCompact
p a housings
c t without h o uinner s iassembly
n g s w i t h o u t i n n e r a s s e m 131 b l y .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C o mComplements
p l e m e n t s 174
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C o mComplements
p l e mforespasn t s f o r s p a s 343
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C o nConcrete
c r epools t e- ABSpinletso o l s - A B S i n l e t s 86
................................................................................................................................................................
C o nConcrete
c r epools t e- Mainpdrains
o o l s - M a i n d r a i n s 80
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C o nConcrete
c r epools t e- Skimmer
p oAccessories
o l s - S k i m m e r A c c e s s o r i e s 76 ............................................................................................................................................
C o nConcrete
c r epools t e- Skimmer
p oaccessories
o l s in -S.S. S k i m m e r a c c e s s o r i e s 79 i n S . S . ................................................................................................................................
C o nConcrete
c r epools t e- Skimmers
p o 15 o ll s - S k i m m e r s 1 5 l 73
........................................................................................................................................................
C o nConcrete
c r epools t e- Skimmers
p o 17.5
o lL s - S k i m m e r s 1 7 . 5 L 74 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C o nConcrete
c r epools t e- S.S. p o o l s - S . S . i n l e t s
inlets 89
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C o nConcrete
c r epools t e- S.S. p o o l s - S . S . S k i m m e r s
Skimmers 77
........................................................................................................................................................
C o nConcrete
c r epools t e- Wallpconduit
o o l s - W a l l c o n d u i t 90
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C o nConcrete
c r epools t e- Waterp level
o oregulators
l s - W a t e r l e v e l r e g u l a t o r 79 s .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C o nConcrete
c r epools t e- Winterp accessories
o o l s - W i n t e r a c c e s s o r i e s 91 .................................................................................................................................................
C o nConditions
d i t iforoaccepting
n s andf order
o r a c c e p t i n g a n d o r d e r 272 ................................................................................................................................................
C o nConnection
n e c boxes t i o n b o x e s 259
...............................................................................................................................................................................
C o nContinous
t i n flocculation
o u s system f l o c c u l a t i o n s y s t e m 206
........................................................................................................................................................
C o nControl
t r oboxesl b o x e s 150
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C o nControl
t r opanell p a n e l 430
.......................................................................................................................................................................................
C o nControl
t r osystem
l s y s t e m 208
....................................................................................................................................................................................
C o uCountercurrent
n t e r cswiming u r equipment:
r e n t Marlin s w i m i n g e q u i p m e n t : M a155 r l i n ...............................................................................................................................
C o uCountercurrent
n t e r cswimming u r r equipment:
e n t Swimtrainer
s w i m m i n g e q u i p m e n t : S153w i m t r a i n e r .................................................................................................................
D e hDehumidifiers
u m i d i f i e r s 379
.....................................................................................................................................................................................
D i a Diatomaceous
t o m a earth c efilters
o u s e a r t h f i l t e r s 112
...............................................................................................................................................................
D i s Disinfection
i n f e with c tactive
i oOxygen
n (freew ifromt hChlorine)
a c t i v e O x y g e n ( f r e e 169 f r o m C h l o r i n e ) ................................................................................................................
D i v Diving
i n &g Springboards
& S p r i n g b o a r d s 43
........................................................................................................................................................................
D o s Dosing
i n equipment
g e q u i p m e n t 209
.............................................................................................................................................................................
D o s Dosing
i n pumps
g p u m p s 199
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E l e Electrode
c t r cleaning
o d eand adjustement
c l e a n i n g a n d a d j u s t e m e n t 206 .............................................................................................................................................
F i l tFilter
e codification
r c o for d commercial
i f i c filtersa t i o n f o r c o m m e r c i a l f i l t399e r s .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F i l tFilter
e diffuser
r d i f f u s e r 321
.......................................................................................................................................................................................
F i l tFilter
e ring
r manifold
r i n forg 1 laterals
m a n i f o l d f o r 1 l a t e r a l s 320 ...................................................................................................................................................
F i l tFilter
e ring
r manifold
r i n forg 3/4m a n i f o l d f o r 3 / 4 l a t e r a l s 320
laterals ...............................................................................................................................................
n s t a l l a t i o n F i l tFiltration
r a tmediai o &naccessories
m e d i a & a c c e s s o r i e s 142
.........................................................................................................................................................
F i l tFiltration
r a tmediai o &naccessories
m e d i a & a c c e s s o r i e s 432
.........................................................................................................................................................
F l o Floats
a t s 483
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
a l l a t i o n F l o Flocculants
c c u l a n t s 171
...........................................................................................................................................................................................
t a l l a t i o n G a s Gas hheaters
e afortpools
e rands spasf o r p o o l s a n d s p a s 377
........................................................................................................................................................
t a l l a t i o n G r a Grab
b rails r a i l s 37
................................................................................................................................................................................................
H a l Halogen
o g elights n l i g h t s 253
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H a l Halogen
o g elights n forlfountains
i g handt pondss f o r f o u n t a i n s a n d p o n d 258 s .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H a nHandles
d l e s 232
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H a nHandrail
d r abrackets
i l b r a c k e t s 39
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H a nHandrails
d r a i l s 38
................................................................................................................................................................................................
H e a Heat
t exchangers
e x c h a n g e r s 365
.................................................................................................................................................................................
H e a Heat
t exchangers
e x c h a n g e r s 369
.................................................................................................................................................................................
H y d Hydrocyclonic
r o c y pre-filter
c l o n i c p r e - f i l t e r 115
....................................................................................................................................................................
I n d Indicators
i c a t o r s 488
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I n - gIn-ground
r o uoverflow
n d commercial
o v e spas r f l o w c o m m e r c i a l s p a s 335 ...........................................................................................................................................
I n - gIn-ground
r o uresidential
n d spas r e s i d e n t i a l s p a s 333
...............................................................................................................................................................
I n j eInjection
c t moulded
i o n sandmfilters o u l d e d s a n d f i l t e r s 116
........................................................................................................................................................
I n o Inox
x Spaecial
S p Pools
a e c i a l P o o l s 492
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I n s Installation
t a l l diagrams
a t i o n d i a g r a m s 109
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L a mLaminated
i n a filters
t e d f i l t e r s 119
................................................................................................................................................................................
L a mLaminated
i n a Filters
t e d F i l t e r s 400
................................................................................................................................................................................
L A MLAMINATED
I N A FILTERST E D F I LT E R S 126
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L a mLampsp sfor halogen

f o rlightsh a l o g e n l i g h t s 258
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L a n Lane
e rope r oaccessories
p e a c c e s s o r i e s 486
........................................................................................................................................................................
L a n Lane
e ropesr o p e s 478
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L a n Lane
e rope r ostorage
p eequipment
s t o r a g e e q u i p m e n t 485
.........................................................................................................................................................
L e a Leaf
f skimmers
s k i m m e r s 234
.....................................................................................................................................................................................
L E DLED control
c o n t r o l s y s t e m s
systems 250
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L E DLED lighting
l i g h t i n g 242
.........................................................................................................................................................................................
L i f eLifeguard
g u chairs
a r d c h a i r s 42
....................................................................................................................................................................................
L i f eLife saving
s a accessories
v i n g a c c e s s o r i e s 41
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L i n Liner
e r accessories
a c c e s s o r i e s 268
.................................................................................................................................................................................
L i n Liner
e r and aprefabricated
n d ppoolr - eABSf inlets a b r i c a t e d p o o l - A B S i n l101e t s .....................................................................................................................................
L i n Liner
n d ppoolr - eMain f drain
a baccessories
r i c a t e d p o o l - M a i n d r100a i n a c c ..............................................................................................................
L i n Liner
n d ppoolr - eMain f drains
a b r i c a t e d p o o l - M a i n d r 96a i n s ....................................................................................................................................
L i n Liner
n d ppoolr - eSkimmers f a b15 rL i c a t e d p o o l - S k i m m e 92 r s 1 5 L ..............................................................................................................................
L i n Liner
n d ppoolr - eSkimmers f a b17.5r Li c a t e d p o o l - S k i m m e 94 r s 1 7 . 5 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L i n Liner
n d ppoolr - eSkimmers f a b17 rL i c a t e d p o o l - S k i m m e 93 r s 1 7 L ..............................................................................................................................
L i n Liner
n d ppoolr - eS.S.finlets a b r i c a t e d p o o l - S . S . i n 105 l e t s ......................................................................................................................................
L i n Liner
n d ppoolr - eWallf conduits
a b r i c a t e d p o o l - W a l l c o106 n d u i t s ...............................................................................................................................
L i n Liner
n d ppoolr - eWater f alevelbregulators
r i c a t e d p o o l - W a t e r l 100 e v e l r e g ................................................................................................................
L i n Liner
e r classification
c l a according
s s i fto ipool c a t i o n a c c o r d i n g t o p o o l 270 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L i n Liners
e r fors stepsf o r s t e p s 271
....................................................................................................................................................................................
L o u Loungers
n g e r s 59
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M a nManual
u a suction
l scleaners
u c t i o n c l e a n e r s 230
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M a r Marlin
l i ncountercurrent
c o uswimming
n t e equipment
r c u r- quick
r e selection
n t guide
s w i m m i n g e q u i p 154
m e n t - q ..................................................................................
M i n Mineralpools
e r a l p o o l s 194
.......................................................................................................................................................................................
M o vMovable
a b lwall e w a l l 491
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M u l Multiport
t i p valves
o r t v a l v e s 133
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
N e o Neolysis
l y sZero i sSalt x UV
Z e r o S a l t x U V 196
......................................................................................................................................................................
N e o Neolysis
l y sZero i sSalt x UV
Z e r o S a l t x U V 458
......................................................................................................................................................................
N e t NetNClean
N Cintegrated
l e a cleaning
n i system n t e g r a t e d c l e a n i n g s y s t e 214 m .......................................................................................................................................
O p t Optional
i o nAstralPool
a l finishes
A s t r a l P o o l f i n i s h e s 326
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O u t Outdoor
d o ofootwash
r f o o t w a s h 57
................................................................................................................................................................................
O v e Overflow
r f l ogratings
w g r a t i n g s 64
................................................................................................................................................................................
P a c Packs
k sof poolo shell
f materials
p o o l s h e l l m a t e r i a l s 107
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P o c Pocket
k e gauges
t g a u g e s 180
.....................................................................................................................................................................................
P o o Pool
l access
a c- Accessories
c e s s - A c c e s s o r i e s 33
....................................................................................................................................................................
P o o Pool
l Access
A c- AstralPool
c e s Signature
s - ladders A s t r a l P o o l S i g n a t u r e l a d 20d e r s ....................................................................................................................................
P o o Pool
l access
a c- Exit
c egrabs rails
s - E x i t g r a b r a i l s 30
................................................................................................................................................................
P o o Pool
l access
a c- Ladders
c e s s - L a d d e r s 20
..........................................................................................................................................................................
Index
P o o Pool
l cleanes
c l epumps a n e s p u m p s 229
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P r e Premium
m i uthermal m coverst h e r m a l c o v e r s 287
..................................................................................................................................................................
P r e Pressure
s s ufluid r ehandling
f lPVCu accessories
i d h a n d l i n g P V C a c c e s s o r i 318 e s .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P r e Pressure
s s ufluid r ehandling
f lPVCu PN-16
i d fittings
h a n d l i n g P V C P N - 1 6 f i t 316 t i n g s .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P r e Pressure
s s ugauge r e panelsg a u g e p a n e l s 140
......................................................................................................................................................................
P r e Pressure
s s ugauge r e panelsg a u g e p a n e l s 433
......................................................................................................................................................................
P r o Products
d u cfortSalt s chlorinators
f o r S a l t c h l o r i n a t o r s 177.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P r o Products
d u cfortSalt s electrolysis
f o r S a l t e l e c t r o l y s i s 176
............................................................................................................................................................
P r o Protection
t e c tcovers i ofornwinterc o v e r s f o r w i n t e r 289
............................................................................................................................................................
P V C PVC rreinforced
e i n150/100
f o r liner
c e d 1 5 0 / 1 0 0 l i n e r 264 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R a n Ranges
g e s 325
..................................................................................................................................................................................................
R e s Residential
i d e nspast ini wooda l cabinet
s p- ADVANCE
a s i n w o o d c a b i n e t - A D 328 V A N C E .............................................................................................................................
S a l Salt
t electrolysis
e l e cANDt pH r control
o l y s i s A N D p H c o n t r o l 455 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S a l Salt
t electrolysis
e l e cANDt pH r control
o l yforsprivate
i s poolsA N D p H c o n t r o l f o r p 187 r i v a t e p o o l s .......................................................................................................................
S a u Sauna
n a 352
....................................................................................................................................................................................................
S a u Sauna
n a accessories
a c c e s s o r i e s 353
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S e l Self-priming
f - p r ipumps m i n g p u m p s 148
..........................................................................................................................................................................
S h o Showers
w e r- Knob s valve
- K n o b v a l v e 54
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S h o Showers
w e r- Showers
s - withStimers h o w e r s w i t h t i m e r s 55 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S h o Showers
w e r- Shower
s -Tunnels S h o w e r T u n n e l s 56
.................................................................................................................................................................
S h o Showers
w e r- Solars showers
- S o l a r s h o w e r s 50
....................................................................................................................................................................
S k i Skimfilters
m f i l t e r s 108
............................................................................................................................................................................................
S k y Skypool
p o oCommercial
l C oPools m m e r c i a l P o o l s 393
...............................................................................................................................................................
S l i dSlides
e s 45
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S o l Solar
a r collectors
c o l l e c t o r s 378
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S p e Special
c i aCentrifugal
l C pumps e n for t sea
r iwater
f u g a l p u m p s f o r s e a w a t 446 e r .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S t a Standard
n d aAstralPool
r d finishes
A s t r a l P o o l f i n i s h e s 327
............................................................................................................................................................
S t a Starting
r t i blocks
n g for competition
b l o c pools k s f o r c o m p e t i t i o n p o o l s 475 ...........................................................................................................................................
S t o Storage
r a grollers
e forr covers
o l l e r s f o r c o v e r s 295
..................................................................................................................................................................
S t r aStrainers
i n e r s 450
...............................................................................................................................................................................................
S u b Submersible
m e r spumps i b l e p u m p s 162
..........................................................................................................................................................................
S u c Suction
t i ohosesn h o s e s 233
......................................................................................................................................................................................
S u p Supports
p o rfort valves manifold
f o r v a l v e m a n i f o l d 431
............................................................................................................................................................
T e s Test
t kits k and
i tphotometers
s a n d p h o t o m e t e r s 181
................................................................................................................................................................
T h e Thermal
r m acovers l - foam
c o v e r s - f o a m 288
......................................................................................................................................................................
T h e Thermal
r m acovers l forcsummer
o v e r s f o r s u m m e r 286
............................................................................................................................................................
T h e Thermometers
r m o m e t e r s 236
....................................................................................................................................................................................
T u r Turning
n i npanelsg p a n e l s 489
....................................................................................................................................................................................
U V UV a automatic
u t o disinfection
m a t iforcpublicdpools i s i n f e c t i o n f o r p u b l i c p459o o l s ..................................................................................................................................
U V UV a automatic
u t o disinfection
m a t iforcresidential
d i pools
s i n f e c t i o n f o r r e s i d e n t197i a l p o o l s .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
V a l vValve
e manifold
m a n i f o l d 428
....................................................................................................................................................................................
V a l vValves
e sand flanges
a n d f l a n g e s 454
.............................................................................................................................................................................
V a r Variable
i a b speedl e pumps s p e e d p u m p s 145
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
V i t rVitreous
e o lining
u s l i n i n g 273
.....................................................................................................................................................................................
W a t Water
e r games g aandm e s water
Ornamental a nfeatures
d O r n a m e n t a l w a t e r f e a 465 t u r e s .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W a t Water
e r metersm e t e r s 207
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W a t Water
e r testtkitse s t k i t s 178
.....................................................................................................................................................................................
W a t Water/water
e r / w plate a theate exchanger
r p l a t e h e a t e x c h a n g e r 372 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W i n Winter
t e care
r products
c a r e p r o d u c t s 173
.........................................................................................................................................................................
POOL SURROUND EQUIPMENT
POOL SHELL EQUIPMENT
FILTRATION
PUMPS
WATER TREATMENT PRODUCTS
DOSING AND CONTROL EQUIPMENT
POOL CLEANING EQUIPMENT
POOL LIGHTING
POOL LINERS AND LINING MATERIAL
POOL COVERS AND ROLLERS
PVC FITTINGS AND ACCESSORIES
SPAS AND SAUNAS
POOL HEATING
COMMERCIAL POOL EQUIPMENT

Pool surround equipment
18
POOL SURROUND
EQUIPMENT
POOL SURROUND
EQUIPMENT
20 Pool Access - AstralPool Signature ladders

20 Pool access - Ladders
28 Above ground pool ladders
30 Pool access - Exit grab rails
33 Pool access - Accessories
34 Access ladders for disabled persons
37 Grab rails
38 Handrails
39 Handrail brackets
41 Life saving accessories
42 Lifeguard chairs
43 Diving & Springboards
45 Slides
48 AstralPool Signature Showers
50 Showers - Solar showers
54 Showers - Knob valve
55 Showers - Showers with timers
56 Showers - Shower Tunnels
57 Outdoor footwash
59 AstralPool Bike
59 Loungers
60 AstralPool Signature ornamental water features
64 Overflow gratings
19
S I G N A T U R E
Pool Access - AstralPool Signature ladders
Elegance ladders
Elegantly designed stepladders with vertical bars that provide easier access to the pool. Manufactured in AISI
316 with 2 anchors. The ladders incorporate a double step with non-slip material for added safety and comfort.
Available in 3 or 4 steps. Two versions of the Signature range with IPE wood and wood-free version. The styl-
ized version with IPE wood is a perfect complement for the rest of Pluvium range. Wood quality and durability,
comfortable to hold. Both models come with a 3-year guarantee.
Code Standard Standard Standard

Packaging Weight kg Volume m3
Elegance Inox
2 steps + 1 safety step 45782 1 14 0.089
Elegance Ip - Inox
Code Code Steps A B
45782 45900 2 + 1 safety step 980 2430
1461
45783 45901 3 + 1 safety step 1230 2680
B
8 Mx.
260
380
FIRST STEP
IS DOUBLE
*See disclaimer
A
LUXE STEP
500
Pool access - Ladders

VLIDO SLO
1078
Waterlift 550 923
Made of Stainless Steel AISI-316 and injected plastic parts. Easy to use and maintain. Automatic lifting device
driven by a 24v cc single phase motor reducer. IP-67 isolation for all the electrical and electronic components.
The different components are controlled by an electronic plate. The system is operated by two push-buttons
(up and down) placed on the rail. Ergonomic and functional design.
32409
VLIDO SLO 1
PARA INFORMACIN 75 3.66
1078
550 923
800
550
bre Hoja: Hoja 1 - Nombre configuracion: - Uso de la configuracin: - Fecha impresin: 11/05/2007 - Formato: 31.05.02
1426
*See disclaimer
180
943
550
20
Tolerancia General Material: AISI-316
ato: 31.05.02
Color: Observacions:
POOL SURROUND
EQUIPMENT
Komfort 650 ladders

Ladder for domestic or commercial pools with the new Komfort step, which allows fixing to the rails without the
need for screws. The Komfort step provides better safety, resistance and a wider support surface that reduces
strain and makes it easier to get in and out of the pool. Handrails in polished Stainless Steel 43 mm.
Komfort 650 - 3 steps 43269 1 12 0.147
Komfort 650 - 4 steps 43270 1 15 0.147
Komfort 1000 ladders for overflow pools

Ladder for domestic or commercial deck level pools with the new Komfort step, which allows fixing to the rails
without the need for screws. The Komfort step provides better safety, resistance and a wider support surface that
reduces strain and makes it easier to get in and out of the pool. Handrails in polished Stainless Steel 43 mm.
Komfort 1000 - 3 steps 42867 1 16 0.154
Komfort 1000 - 4 steps 42868 1 17 0.154
Komfort Split ladders

Undercover ladder with flange fixings for the top only, handrails in polished Stainless Steel 43 mm.
Komfort Split 3 steps 41324 1 7.6 0.064
Komfort Split 4 steps 41325 1 9 0.060
Code X A B C D
43269 650 1710 960 492 750
250
8 Mx.
43270 650 1960 1210 492 750

42867 1000 1710 960 842 750
D
42868 1000 1960 1210 842 750

c
250
41324 - - 960 - -
41325 - - 1210 - -
A
180
8 Mx.
B
250
180
Step in anti-slip plastic 500
21
Wall model ladders

Ladders for embedded pools. Handrails in polished Stainless Steel ( 43 mm) tube. Steps in Stainless Steel.
Its perfect design assures anti-slip security. Complete with anchoring fixtures and earthing connection.
Steps A B C D E F
2 350 620 250 710 180 500

3 350 620 250 960 180 500
4 350 620 250 1210 180 500
5 350 620 250 1460 180 500
Wall model ladder with Luxe model steps

Rails & steps in AISI-316.
2 steps ladder 05480 1 9.0 0.05
3 steps ladder 05481 1 10.5 0.06
4 steps ladder 05482 1 12.4 0.06
5 steps ladder 05483 1 13.7 0.07
Wall model ladder with Standard model steps

2 steps ladder 05492 1 9.0 0.05
3 steps ladder 05493 1 12.7 0.06
4 steps ladder 05494 1 14.8 0.06
5 steps ladder 05495 1 13.6 0.07
SEA
H-Protection ladder
Ladder width 500 mm. Handrail in hand polished in Stainless Steel (43 mm). Rails in Stainless Steel
AISI-316, with a special plastic coating and plastic threats in order to be protect to any water-treatment and
to be install in salt-water.
H-Protection ladder - 2 steps 54104 1 9 0.073

22
POOL SURROUND
EQUIPMENT
Standard model ladders

Its perfect design assures anti-slip security. Complete with anchoring fixtures and earthing connection.
Steps A B C D E F
2 650 620 250 710 180 500

3 650 620 250 960 180 500
4 650 620 250 1210 180 500
5 650 620 250 1460 180 500
Standard ladder with Luxe model steps

2 steps ladder 05476 1 9.8 0.07
3 steps ladder 05477 1 11.5 0.08
4 steps ladder 05478 1 14.0 0.08
5 steps ladder 05479 1 15.0 0.10
Standard ladder with Standard model steps

2 steps ladder 05488 1 9.6 0.07
3 steps ladder 05489 1 12.0 0.08
4 steps ladder 05490 1 15.0 0.09
5 steps ladder 05491 1 15.0 0.09
Available in US customary units without fastening plate and plastic step tread.
23
Mixed model ladders

Its perfect design assures anti-slip security. Supplied with anchoring fixtures and earthing connections.
Steps A B C D E F G
2 350 620 250 710 180 500 522

3 350 620 250 960 180 500 522
4 350 620 250 1210 180 500 522
5 350 620 250 1460 180 500 522
Mixed model ladder with Luxe model steps

2 steps ladder 05484 1 9.7 0.07
3 steps ladder 05485 1 11.5 0.08
4 steps ladder 05486 1 12.6 0.09
5 steps ladder 05487 1 14.8 0.09
Mixed model ladder with Standard model steps

2 steps ladder 05496 1 9.7 0.07
3 steps ladder 05497 1 11.4 0.08
4 steps ladder 05498 1 15.3 0.09
5 steps ladder 05499 1 14.8 0.10
24
POOL SURROUND
EQUIPMENT
Standard asymmetrical model

Standard model ladder for embedded pools. Handrails in polished Stainless Steel ( 43 mm) pipe. Complete
with anchoring fixtures and earthing connection. Rails and non-slip LUXE steps in AISI-316. Its design assures
safety against any slipping or cuts.
1 step Luxe + 1 double safety step 19938 1 13.0 0.07
2 steps Luxe + 1 double safety step 19939 1 13.9 0.08
Code Steps A B
19938 2 1330 710
19939 3 1580 960
920
19940 4 1830 1210
620
19941 5 2080 1460
8 Mx.
A
492
650
500
B
250
180
Mixed asymmetric model

Mixed model ladder for embedded pools. Handrails in polished Stainless Steel ( 43 mm) pipe. Its design as-
sures safety against any slipping or cuts. Supplied with anchoring fixtures and earthing connection. Rails and
non-slip LUXE steps in AISI-316.
Code Steps A B
738
19943 3 1580 960
19944 4 1830 1210
19945 5 2080 1460
920
620
8 Mx.
A
192
500
350
B
250
180
25
Overflow 1000 model

Ladder width 500 mm. Handrails in polished Stainless Steel ( 43 mm) pipe. With anchoring fixtures and
earthing connection. Manufactured in accordance to EN 13451-1 and EN 13451-2 Standards. Rails and non-
slip steps in AISI-316.
Code Steps A B
07514 2 1460 710
07515 3 1710 960
07516 4 1960 1210
07517 5 2210 1460
Double safety
step
Ladder for overflow pool

A new feature of this ladder is the variable radius of the curve in the grip section giving a more modern and
attractive appearance. Steps with a width of 500 mm and made according to European Standards EN 13451-
1 and EN-13451-2. Easily installed. Handrails 43 mm x 1.5 mm and steps in AISI-316 with polished finish.
With anchoring fixtures and earth connection. Note: Installation with the anchors codes 00043, 08727,
07331, 18243 is not allowed.
2 steps ladder 32653 1 13.2 0.158

3 steps ladder 32654 1 16.2 0.180
4 steps ladder 32655 1 17.1 0.202
5 steps ladder 32656 1 19.2 0.217
Code Steps A B
32653 2 1460 710
32654 3 1710 960
32655 4 1960 1210
32656 5 2210 1460
Double safety
step
Double non-slip safety step

Complies with EN 13451-1 and EN 13451-2 Standards. Steps in AISI-316 with polished finish. Suitable for
all inground ladder models.
07603 1 2.05 0.003
26
POOL SURROUND
EQUIPMENT
Easy access model

Ladder width 500 mm. Handrails in polished Stainless Steel ( 43 mm) pipe. With anchoring fixtures and
earthing connection. With double safety steps and increased overall height in accordance to BS EN 13451
Standard. Rails and non-slip steps in polished AISI-316.
3 steps ladder 07782 1 21.6 0.145
4 steps ladder 11979 1 25.9 0.202
Code Steps A B C D E F
07782 3 1835 750 250 243 490 500
11979 4 2085 750 250 243 490 500
Split bottom half ladder

Complete with top and bottom flange fixings and top double safety step in accordance with EN 13451-1 and
EN 13451-2 European Standards. Rails and non-slip steps in polished AISI-316. Can be used with any type
of exit rails. With fixing plates, gaskets, screws and rawl plugs.

Double safety
step
Code Steps A
08090 2 710
08091 3 960
08092 4 1210
08093 5 1460
Split bottom half ladder

Rails and steps in polished Stainless Steel AISI-316 ( 43 mm). With fixing plates, gaskets, screws and rawl
plugs.
2 steps Luxe 01456 1 5.0 0.04

3 steps Luxe 01457 1 6.3 0.04
4 steps Luxe 01458 1 7.7 0.05
5 steps Luxe 01459 1 9.2 0.07
Code Steps A B C
01456 2 710 180 250

01457 3 960 180 250
01458 4 1210 180 250
01459 5 1460 180 250
27
Above ground pool ladders
Above ground pool Stainless Steel ladder + platform

Handrails 43 in polished AISI-304 Stainless Steel with platform and steps in plastic steps.
Packing Weight Volume m3
Pool height 1 m
2 x 3 steps + 1 platform 05520 1 18.2 0.07
Pool height 1.20 m
2 x 4 steps + 1 platform 05521 1 21.4 0.09
Pool height 1.50 m
2 x 5 steps + 1 platform 05522 1 24.5 0.11
Code A B C D E F
05520 1150 1680 240 1030 375 500
05521 1360 1920 240 1270 375 500
05522 1625 2250 240 1600 375 500
Partially in-ground S.S. ladder + platform

Handrails 43 in polished AISI-304 Stainless Steel with platform and steps in plastic steps.
Pool height 1 m
1 x 3 steps + 1 step + 1 platform 05523 1 18.0 0.07
Pool height 1.20 m
Pool height 1.50 m
Code A B C D E F G
05523 920 1680 240 1030 375 500 480
05524 1025 1920 240 1270 375 500 720
05525 1130 2250 240 1600 375 500 960
Above ground aluminium ladder + platform

Handrails 28 mm in white painted aluminium with platform and steps in plastic steps.
Pool height 1 m
2 x 3 steps + 1 platform 00031 1 10.9 0.067
Pool height 1.20 m
2 x 4 steps + 1 platform 00032 1 12.7 0.076
Pool height 1.50 m
2 x 5 steps + 1 platform 00033 1 14.5 0.100
Code A B C D E F
00031 1120 1680 240 1050 375 500
00032 1330 1920 240 1290 375 500
00033 1540 2160 240 1530 375 500
28
POOL SURROUND
EQUIPMENT
Above ground pool ladders
Range of ladders for above ground pools

The plastic steps have an ergonomic design and are treated against UV rays. The steps also have in-built bushings, not visible externally. The pipe
used is of 25 mm galvanized steel and is painted in white.
In ladders having platforms, this has a large surface area, and for ladders with a security system, the front base is designed in plastic for easy assembly
and use.
2 x 3 steps. Pool height 0.90 m 27286 1 8.20 0.028

2 x 4 steps. Pool height 1.20 m 27287 1 10.06 0.036
2 x 3 with platform. Pool height 0.90 m 27288 1 10.89 0.047
2 x 4 with platform. Pool height 1.20 m 27289 1 12.54 0.056
2 x 4 with platform and security system. Pool height 1.20 m 27290 1 15.61 0.056
27286 27287 27288
27289 27290
29
Pool access - Exit grab rails
800 x 800 mm model

In polished S.S. AISI-316 43 mm pipe. Exit grab rails supplied as a pair including fixing plates, gaskets,
screws and rawl plugs.
With fixing plates (pair) 05541 1 9.27 0.10
For embedding (pair) 05540 1 8.40 0.10
470 x 800 mm model

In polished S.S. AISI-316 43 mm pipe. Exit grab rails supplied as a pair including fixing plates, gaskets,
screws and rawl plugs.
470 x 800 mm model with rectangular base plate model

In polished S.S. AISI-316 43 mm pipe. Exit grab rails supplied as a pair including fixing plates, screws and
rawl plugs.
30
POOL SURROUND
EQUIPMENT
Crossover model with rectangular base plate

rawl plugs.
106
900
750
600
375
230
130
Parallel model
plugs. For fixing with anchoring fixture code 00143 (not included).
00110 1 10.0 0.11
Asymmetrical model
plugs. For fixing with anchoring fixture code 00143 (not included).
00111 1 10.1 0.14

1050
750
80
560
810
31
Grab rails, fixed in and out of the water

Polished S.S. AISI-316 43 mm pipe.
For embedding
(Pair) Length 1,220 mm 00034 1 11.4 0.14
(Pair) Length 1,524 mm 00035 1 13.0 0.16
With flanges (gaskets, fixing plugs and screws)

(Pair) Length 1,220 mm 00036 1 12.2 0.21
(Pair) Length 1,524 mm 00037 1 13.6 0.24
L A B
1220 800 608
1524 800 855
Grab rail fixed out of the water

Polished S.S. AISI-316 ( 43 mm pipe)
1 unit
For embedding 07780 1 6.7 0.118
With flanges (gaskets, fixing
plugs and screws) 07781 1 6.7 0.118
Code A B C
07780 1250 800 203
07781 1250 800 203
Ladders and grab rails made to measure

Stainless Steel ladders and handrails AISI-304 and AISI-316 can be manufactured to suit your requirements.
8 STEPS LADDER GRAB RAIL L = 900 SPECIAL HANDRAIL
32
POOL SURROUND
EQUIPMENT
Pool access - Accessories
Ladder anchoring sockets

In plastic for 43 mm pipe. With earthing connection.
00042 50 7.0 0.03
Ladder hinge without base plate

In polished Stainless Steel (AISI-304) for 43 mm pipe.
00043 1 0.93 0.002
Flanged ladder hinge

In polished Stainless Steel (AISI-304) for 43 mm pipe.
08727 1 1.0 0.002
Removable anchoring with base plate

In polished Stainless Steel (AISI-316) for 43 mm pipe. Includes gaskets, screws and rawl plugs.
Set of 2 units 07331 1 1.00 0.003
33
Access ladders for disabled persons
Portable chair for Disabled

It is the perfect solution for facilities with multiple pools. It can be set up anywhere along the pool deck, and
put away when not in use. Consistent operation: Features a 24 volt rechargeable battery, which powers a me-
chanical actuator. This combination ensures the chair will work when you want it to work. Its hand control is
completely waterproof. Easy to use: Can be operated by either the user or an attendant. Just roll the chair to the
edge of the pool, lock the wheels, set the stabilizers, and it is ready to use. Structure made of proof materials
resistant to the corrosion. Armrest & Footrest included. Makes any pool accessible in seconds. It provides a
136 kg lifting capacity and a 240 turning radius for safe transfers away from pool edge. It is truly the easiest
way to get everyone into the water.
Chair PAL 49901 1 401.5 -
Technical Features:
Height 211 cm
Base Height 60 cm
Base Lenght 89 cm
Total Weight 385 Kg
Overall length:
Extended 264 cm
Storage position 140 cm
Power 24 V DC
Battery life 30 cycles (approx.)
Lifting capacity 136 kg
Splash semi-portable lifting system for swimming facilities

Chair fixture in the swimming beach for the disabled. For your installation requires an anchor to the ground.
Your recargabable 24 V battery powers a metal actuator, ensuring that the team is always ready for your use.
Durability of 30 cycles once loaded. Remote Control Waterproof. Splash is equipped with a structure of water-
proof materials to prevent corrosion, armrests and footrest. The load capacity of 136 kg and the leeway of 359
makes it one of the most practical solution for a handicapped access to the pool.
Splash 53924 1 390 1.789
34
POOL SURROUND
EQUIPMENT
Access ladders for disabled persons
Hydraulic chair lift

Frame made of polished Stainless Steel AISI-316 with a central hydraulic mechanism and seat, provided also
with a ladder for the assistant. For correct hydraulic operation a minimum 3.5 kg/cm2 water supply pressure is
required.
Rails L-650 28619 1 18.7 0.253
Rails L-1000 28620 1 35.5 0.383
Cylinder 28621 1 13.8 0.042
Accessories 28622 1 18.3 0.178
INSTALLATION:
The external fixings are 2 metal anchoring fixtures (supplied with the unit) the 2 front connecting supports are
adjustable allowing the height to be changed to adapt to different types of swimming pool surround.
Valve control
Water connection entrance
detail Scale 1.5
For pool depths below 1.5 m
ext. 1/2" W BSP thread
please inquire. L-650 L-1000

525
Anchoring Valve control Anchoring Valve control

00143 detail 00143 detail
250
1400
1500
Valid for both models Lift Rails Cylinder Components
L-650 28619
28621 28622
L-1000 28620
Valid for both models
35
ACCESS LADDERS FOR DISABLED PERSONS
For easy entry and exit into leisure or hydrotherapy pools for people not requiring an hidraulic lift chair. Easy
assembly.
500 mm width model

In polished Stainless Steel AISI-316, 43 mm pipe, with plastic non-slip steps. With anchoring fixtures and
earth connection.
4 steps 00116 1 28.0 0.300
5 steps 00117 1 40.9 0.300
6 steps 00118 1 47.5 0.370
7 steps 00119 1 51.4 0.370
8 steps 00120 1 48.0 1.057
970 mm width model

In polished Stainless Steel AISI-316, 43 mm pipe, with plastic non-slip steps. With anchoring fixtures and
earth connection.
4 steps 00116 + 4 Kit 28615 1 - -
5 steps 00117 + 5 Kit 28615 1 - -
6 steps 00118 + 6 Kit 28615 1 - -
7 steps 00119 + 7 Kit 28615 1 - -
8 steps 00120 + 8 Kit 28615 1 - -
Model 500 Model 970 Steps H L

00116 00116 + 4 x. KIT 28615 4 950 a 1150 1075
00117 00117 + 5 x. KIT 28615 5 1150 a 1350 1325
00118 00118 + 6 x. KIT 28615 6 1350 a 1550 1570
00119 00119 + 7 x. KIT 28615 7 1550 a 1750 1820
00120 00120 + 8 x. KIT 28615 8 1750 a 1950 2065
Vertical reinforced pipe

only in 7 & 8 steps
Example:
Pi
For a 970 mm ladder with 7 steps,

pe
please order:
1 00119
7 28615 (1 Kit per step)
Ladder to be
cut for height
adjustment
Step Kit for transforming a ladder from width 500 to 970 mm

To convert a ladder from 500 mm to 970 mm. One Step Kit will be necessary for each of the steps of the
ladder. In polished AISI-316 Stainless Steel, with plastic step with non-slip surface.
28615 1 5.9 0.027
36
POOL SURROUND
EQUIPMENT
Pool access - Accessories
Anchor with locking bolts

In polished Stainless Steel AISI-316. For 43 mm pipe.
00143 2 1.2 0.003
Ladder foot pad

Made in plastic, angle can be adjusted by rotating the eye ball socket. Recommended for liner pools.
For 43 mm pipe 00045 50 12.6 0.03

For 28 mm pipe 00046 50 14.0 0.03
Grab rails
Handrails in Stainless Steel

In polished S. S. AISI-316. 43 mm pipe. With fixing flanges (Supplied with gaskets, fixing plugs, and
screws).
0.5 m 00051 2 2.8 0.02
1 m 00052 2 4.3 0.04
2 m 00053 2 7.9 0.09
2.5 m 00054 2 9.5 0.11
Tee bar
In polished S. S. AISI-316. 43 mm pipe.
With fixing plates (Supplied with 00056 1 2.09 0.01

gaskets, fixing plugs, and screws)
37
Handrails
Straight spigot
Curved connector
Pipe
We also supply pipes and

items needed to install grab
rails or other decorative
features around the edge of
the pool.
End cap Bracket
Straight handrails
In polished Stainless Steel AISI-316. Handrail length: 1 m. Length must be specified when placing order.
43 mm tubing with sealed ends 05545 1 1.5 0.002

43 mm tubing with open ends 19946 1 1.3 0.002
43 mm tubing with 1 sealed 20092 1 1.3 0.002
end and the other open
Straight connector
In polished Stainless Steel AISI-316. For joining 43 mm pipe.
09452 1 0.32 0.001
Curved connector
In polished Stainless Steel AISI-316. For joining 43 mm pipe.
11286 1 0.3 0.001
End caps
In polished Stainless Steel AISI-316. For 43 mm pipe end.
08014 1 0.1 0.001
38
POOL SURROUND
EQUIPMENT
Handrail brackets
One side closed bracket

For 43 mm pipe. In polished S.S. AISI-316. Supplied with gaskets, rawl plugs and screws.
07789 2 0.6 0.002
90 Angle handrail support

For 43 mm pipe. In polished S.S. AISI-316. Supplied with gaskets, rawl plugs and screws.
11143 1 1.17 0.002
Fixing plate kit for liner pools

In S.S. AISI-316.
26172
1 0.3 0.002
39
Handrail brackets
Split bracket
For 43 mm pipe. In polished S.S. AISI-316. Supplied with rawl plugs and screws (concrete pool) & with
gaskets and screws (liner pool).
Concrete pool 25342 2 0.72 0.002
Liner pool 28618 2 1.40 0.002
28618 25342
Straight bracket with base plate

For 43 mm pipe. In polished S.S. AISI-316. Supplied with gaskets, rawl plugs, and screws.
08013 2 0.5 0.002
40
POOL SURROUND
EQUIPMENT
Life saving accessories
Lifebuoy holder
In Stainless Steel AISI-304. For use with telescopic handles 01361, 01362, 01363, & 15838.
01368 1 1.46 0.03
Lifebuoy
Made of Styropor covered with orange canvas, outer 700 mm.
01369 6 18.0 0.330
Lifebuoy holder
In Stainless Steel AISI-304. Designed to be hung on wall or fitted on to a lifebelt holder post (code 01371).
Supplied with anchor plugs and screws.
01370 1 1.16 0.004
Lifebelt holder post

In AISI-304 Stainless Steel, 43 mm. Base plate with 3 holes. Supplied with gaskets, anchor plugs and
screws.
01371 1 3.0 0.01
41
Lifeguard chairs
New
Lifeguard chair
Made in Stainless Steel AISI-304, 43 mm pipe. With dismountable base plate. Steps, platform, chair, made
of plastic. Parasol holder and lifebuoy bracket included. Optional base bar with wheels.
Lifeguard chair 56993 1 55.6 0.92

Lifebelt holder 56994 1 - -
Parasol holder 56995 1 - -
2155
250
1927
395
1500 506
1264
SIDE FRONT
H-400 lifeguard chair with quick access

Made in Stainless Steel AISI-304, 43 mm pipe. Steps, platform, chair made of plastic. Large platform and
90 rotating seat to increase the range of vision. Ideal for childrens pools, water parks or shallow areas of
public pools. Includes parasol holder.
15673 1 39.6 0.66
TOP FRONT SIDE
Multipurpose H-1000 lifeguard chair

Made in Stainless Steel AISI-304, 43 mm pipe. Steps, platform, chair made of plastic. Large platform and
90 rotating seat to increase the range of vision. Includes parasol holder.
15674 1 65.0 1.64
TOP FRONT SIDE
42
POOL SURROUND
EQUIPMENT
Diving & Springboards
Flexible springboard Dynamic

Made of Polyester and fibreglass resistant to UV exposure and adverse weather conditions. Non-slip surface
covering entire length of board. Supplied with anchoring fixtures.
Length 1.61 m Width 0.46 m 21392 1 22.0 0.335
Diving board 1200 Dynamic

Made of Polyester and fiberglass resistant to UV exposure and adverse weather conditions. Non-slip surface
covering entire length of board. Supplied with anchoring fixtures.
Length 1.20 m Width 0.40 m 20090 1 20.0 0.325
Diving board Dynamic

Board made of Polyester and fibreglass, with non-slip surface. Grab rails and supports made of Stainless Steel
with matt finish. Supplied with anchoring fixtures.
Length 2 m Width 0.60 m 23199 1 50.0 1.585

Length 2.30 m Width 0.60 m 23200 1 52.0 1.585
Code A (m)
23199 2
23200 2.3
43
Dolphin model
Flexible Polyester and fibreglass springboard in light blue. Supplied with anchoring fixtures.
Length 1.6 m. Width 0.35 m 00076 1 123.0 0.138
Ballesta model
Light blue Polyester and fibreglass springboard. Springboard bracket made of galvanized Steel. Supplied with
anchoring fixtures.
Length 1.8 m Height 0.25 m Width 0.4 m 00077 1 27.0 0.084
Code 00077 Code 00078
Elevado model
Base laminated in ivory-coloured Polyester and fibreglass, with light blue board. With 2 handrails in Stainless
Steel. Non-slip board and steps. Supplied with anchoring fixtures.
Length 2 m Height 0.55 m Width 0.4 m 00068 1 38.0 0.850

Code 00068 Code 00069
44
POOL SURROUND
EQUIPMENT
Diving boards
Polyester and fibreglass boards with new patented non-slip surface in blue. Anchoring fixtures are not supplied.
Width 0.40 m
Length 1.4 m 00060 1 - -
Length 1.8 m 00061 1 16.0 0.046
Length 2.0 m 00062 1 18.0 0.050
Length 2.3 m 00063 1 22.0 0.060
Width 0.46 m
Length 2.5 m 00064 1 31.0 0.080
Length 3.2 m 00065 1 46.0 0.100
F
D E Point of support
Code Board A B C D E F G
Point of support 00061 1.80 mts. 1800 390 247 80 910 30 16 M-14
do not drill
00062 2.00 mts. 2000 390 247 80 940 30 16 M-14
-G 00063 2.30 mts. 2300 390 247 80 1150 30 16 M-14
min.
00064 2.50 mts. 2500 465 290 125 1225 30
B
C
M-16
min.
00065 3.20 mts. 3200 465 125 1540 30 M-16
A
Diving board supports

In polished Stainless Steel AISI-304, 43 mm tube. With platform fixing bolts.
For boards up to 2.30 m in length 14586 1 8.0 0.040

For boards from 2.5 to 3.2 m in lenght V-079/06 1 - -
Slides
Pranaslide model
Light blue polyester and fibreglass slide. Grab rails in white painted Aluminium. Fitted with water supply con-
nection to ease sliding. Supplied with anchoring fixtures.
Height 1.50 m 00085 1 62.0 1.214

Height 1.80 m 00086 1 70.0 1.368
Code 00085 Code 00086
45
Slides
Curved model
Light blue Polyester and fibreglass slide. Grab rails in white painted aluminium. Fitted with water supply con-
nection to ease sliding. Supplied with anchoring fixtures.
Right curve, height 1.78 m 00088

1 83.0 2.913
Left curve, height 1.78 m 00089 1 83.0 2.913
00088 RIGHT
Straight model
Light blue Polyester and fibreglass slide. Steps in plastic. Polished Stainless Steel handrails. Fitted with water
supply connection to ease sliding. Supplied with anchoring fixtures.
Height 1.30 m 00081 1 31.0 0.550

Height 1.80 m 00082 1 38.0 0.850
Height 2.00 m 00083 1 44.0 0.750
00081 00082 00083
Slides
White coloured slide made of polyester, reinforced with fibreglass. Steps in plastic. Handrails in Stainless Steel.
Supplied with water jet. Height 2 m. Fitted with anchoring fixtures.
Straight 18543 1 - 3.000

Left curve 18545 1 - 3.000
46
POOL SURROUND
EQUIPMENT
Slides
Model Typhoon
Rotomolded slides with handrails and an enclosed non-slip ladder that ensure a safety use. It is compatible
with Salt Chlorinators system as it is indicated with a label " Salt Pool Approved". It is fitted with water inlet to
make easy the scrolling down. Height of 2.10 metres. Colours available: Sandstone.
52253 1 61 -
Colour available:
Model Cyclone
Rotomolded slides with handrails and an enclosed non-slip ladder that ensure a safety use. It is compatible
with Salt Chlorinators system as it is indicated with a label " Salt Pool Approved". It is fitted with water inlet to
make easy the scrolling down. Height of 1.20 metres. Colours available: Taupe.
52254 1 115 -
Colour available:
47
S I G N A T U R E
AstralPool Signature Showers
Pluvium shower
Contemporary shower with an elegant and modern look due to the minimalist design and high quality materials
used. Designed to offer the greatest sense of relaxation and well-being. Highly durable Ipe wood combined with
high resistance glossy stainless steel. Rainfall System for a relaxing effect. Adjustable shower head for greater
user comfort and enhanced use of water. Mixer valve for hot and cold water control Shower head with anti-li-
mescale system that provides greater durability. Optional shower tray for a perfect finish.
Pluvium shower with shower tray 43583 1 38 0.169

Pluvium shower without shower tray 43432 1 27 0.136
376
2170
2040
SHOWER HEAD MIXER VALVE
1000
220
590
*See disclaimer
Pluvium Solar shower without shower tray

Made with high quality materials such as wood IPE and satin finish AISI 316 Stainless steel, which all give a
longer life and greater resistance to weathering and corrosion. The aluminum water tank has a capacity for 30
litres of water. Shower head with swiveling Calc system that increases user comfort. A single lever controls hot
and cold water. Flow rate limiter which reduces 40% water consumption in the shower flow pressure above 3
bars.
Pluvium solar shower without shower tray 43435 1 37 0.225
275
220
711
*See disclaimer
Pluvium shower tray

Shower tray for the Pluvium shower in wood IPE and satin finish AISI 316 stainless steel. Its minimalist and
compact design provides an elegant and modern image for the pool surround.
Pluvium shower tray 43434 1 11 0.028
SECCIN A A
712
601
A A
21
*See disclaimer
600
38,
39
712
48
POOL SURROUND
EQUIPMENT
S I G N A T U R E
AstralPool Signature Showers
Iguazu shower
Satin Stainless Steel AISI-316 shower that incorporates a solid surface face plate. Chromed brass anti-limer
shower-head and 2 bruminator spray jets controlled by a 2 way diverter valve. Water-flow and temperature are
regulated by a mixer valve.
Iguazu shower 53874 1 27 0.163
SHOWER HEAD MIXER VALVE FRONTAL JETS
New
Iguazu solar shower
Satin Stainless Steel AISI-316 shower that incorporates a face solid surface plate. Chromed brass anti-limer
shower-head and 2 bruminator spray jets controled by a 2 ways diverter valve. Heat up by means of a 25 litres
aluminum accumulator tank with a single cold water tap, thus taking advantage of the solar energy.
Iguazu solar shower 56933 1 32 0.163
SHOWER HEAD MIXER VALVE FRONTAL JETS
49
Showers - Solar showers
Solar shower with 50 litre tank

AISI-304 polished Stainless Steel shower. With a single cold water tap. It heats up by means of a 50 litre alu-
minium accumulator tank thus taking advantage of the solar energy. With 2 valves (cold/hot) and an adjustable
nozzle. Water drain plug. Attaches to the ground by means of anchoring screws and plugs.
Height (shower head to ground): 2.10 m 33828 1 21.3 0.193
SHOWER HEAD Tap
ECO solar shower with 30 litre tank

Shower in polished Stainless Steel AISI-304, which with a single cold water tap, heats up by means of a 30
litre aluminium accumulator tank thus taking advantage of the solar energy. Adjustable massage shower nozzle
with 3 functions and an anti-lime membrane. With 1 mixing valve (cold/hot). Quick fixing water connection.
Attaches to the ground by means of anchoring screws and plugs.
Height (shower head to ground): 2 m 36848 1 12.0 0.16
Solar shower with a flexible 20 litre tank

A shower in painted steel, which with a single cold water tap, heats up by means of a flexible 20 litre accumu-
lator tank thus taking advantage of the solar energy. With 2 valves (cold/hot) and a chromed brass nozzle. At-
taches to the ground by means of anchoring screws and plugs.
Height (shower head to ground): 2.10 m 34312 1 15.4 0.089
SHOWER HEAD Knob
50
POOL SURROUND
EQUIPMENT
Angel Solar
Solar shower
The best design
at your fingertips
Sustainable shower in a sober
design that makes it the perfect
accessory for any pool
Built-in 30-litre tank
High performance chrome plated

showerhead
51
Showers - Solar showers
Niagara solar shower

Polished Stainess Steel shower AISI-304, which heats up by means of a 35 litre aluminum accumulator tank
with a single cold water tap, thus taking advantage of the solar energy. An antical squared shower head is
incorporated.
Niagara solar shower 53873 1 25 0.26
New
Angel solar shower
Polished Stainess Steel shower AISI-304, which heats up by means of a 30 litre aluminum accumulator tank
with a single cold water tap, thus taking advantage of the solar energy. An anti-calcareous squared head-shower
is incorporated.
Angel solar shower 56932 1 13 0.152
SHOWER HEAD Valve
52
POOL SURROUND
EQUIPMENT
Showers - MIXER VALVE SHOWER
Misty Art shower

Shower in a original design made of satin finish stainless steel AISI 316. It incorporates an anti-calcareous
spray, two fogging nozzles, 1 mixing valve and a footbath tap.
45867 1 50 1.325
2363,5
2100
1500
350
1100
862
750
500
Niagara shower
Polished Stainless Steel AISI-304 shower with 1 square shower-head (150 m x 150 m) and 1 valve.
Niagara shower 53872 1 22 0.125
SHOWER HEAD VALVE
53
The Angel range of showers

is compatible with showers
Showers - Knob valve
with code numbers 00091
and 00092.
Angel shower with footwash

Polished Stainless Steel AISI-304 shower (diameter 43 mm) with 1 chromed and anti-lime shower-head,
1 valve and footwash tap. 00107 anchoring fixture included.
Angel shower wiht footwash 52718 1 5.6 0.43
SHOWER HEAD KNOB FOOTWASH
Angel shower
Polished Stainless Steel AISI-304 shower (diameter 43 mm) with 1 chromed and anti-lime shower-head and
1 valve. 00107 anchoring fixture included.
Angel shower 52717 1 5.6 0.43
SHOWER HEAD KNOB
New
Angel con 2 rociadores
Specially designed to be installled in facilities with a high footfall (public and semi-public pools). AstralPool
showers for public facilities are characterised by their highly resistant materials, considered vandal-proof, and
the water savings made thanks to their built-in flow limiters.
Angel shower with two showerheads 59775 1 - -
SHOWER HEAD KNOB
54
POOL SURROUND
EQUIPMENT
The new range of showers

with timers have replaced the
Showers - Showers with timers
showers with reference code
00095, 0097, 08728, 15841
and 19947. New
Shower with timer and 1 showerhead
Showers specially designed to be installled in facilities with a high footfall (public and semi-public pools).
AstralPool showers for public facilities are characterised by their highly resistant materials, considered vandal-
proof, and the water savings made thanks to their built-in flow limiters.
Shower with timer 1 showerhead 59776 1 - -
SHOWER HEAD TIMER

PUSH BUTTON
New
Shower with timer, 1 showerhead and footwash tap
Shower with timer, 1 showerhead and footwash tap 59777 1 - -
SHOWER HEAD TIMER FOOTWASH

PUSH BUTTONS
New
Shower with timer and 2 showerheads
Shower with timer and 2 showerheads 59778 1 - -
SHOWER HEAD TIMER

PUSH BUTTONS
55
Showers - Showers with timers
New
Shower with timer and 4 showerheads
Shower with timer and 4 showerheads 59779 1 - -
SHOWER HEAD TIMER

PUSH BUTTONS
Showers - Shower Tunnels
Shower tunnel with 1 arch

For public pool entry. In polished Stainless Steel AISI-304 and 28 mm tube. Rawl plugs and screws in-
cluded.
1 arch with 3 shower heads. Width: 1.2 m 00100 1 9.6 0.10
1 arch with 5 shower heads. Width: 2 m 19948 1 10.4 0.14
SHOWER HEAD
Control column
In Stainless Steel AISI-304. Controls automatically the water flow electrically. Includes 220V/24V transformer,
photoelectric timer cell, and electrovalve. Rawl plugs and screws included.
00102 1 7.0 0.02
56
POOL SURROUND
EQUIPMENT
Showers - Shower Trays
Shower anchoring fixtures

With fixing device and earth connection. Allows easy dismantling of shower.
Shower anchoring 43 mm in PVC 00107 1 0.48 0.003

For models: 00091, 00092 and 00099
Shower anchoring 63 mm in PVC 27333 1 1.0 0.003
For models: 00095, 00098, 19947 and 15841
27333 00107
Stainless Steel polish cleaner

Decalcifer and degreaser suitable for cleaning all Stainless Steel surfaces.
1 Liter 18713 12 u. 13.8 0.023

5 Liters 16630 2 u. 22.0 0.034
Outdoor footwash
Footwash for public use

Polyester resin and fibreglass base plate. 2 x 1 m with gel coat finish. Features:
- Drain grille 3/8
- Overflow and water inlet connection 3/8 .
- Non-slip surface.
- Angled bottom plate to prevent water build up.
Blue colour 21255 1 4.0 0.91

White colour 21255CLO7 1 4.0 0.91
Disinfectant dispenser
Designed to be installed to the footwash, (can be screwed or glued). To place a 200 gr Chlorine tablet to desin-
fect the water. Includes locking screws, to prevent opening as well as assuring safety to the user.
25356
- - -
57
Showers - Accessories
Relax model shower tray

Dimensions 80 cm x 90 cm. Large size drain grille in Stainless Steel positioned away from standing area. Tray
in polyester and fibreglass with non-slip pattern and gel-coat finish.
With anchoring fixture 43 mm 20066 1 9.0 0.143

For showers 00091, 00092 and 00099
Classic model shower tray

Dimensions 100 cm x 80 cm. Large size drain grille in Stainless Steel. Tray in Polyester and fibreglass with
non-slip pattern and gel-coat finish.
For showers 00091, 00092 and 00099
Shower tray
Dimensions 80 cm x 80 cm. with adjustable bottom drain. Drain grille 130 mm, connection 50 mm. Tray
in Polyester and fibreglass.
For showers 00091, 00092 and 00099
20066 19723 00103
58
POOL SURROUND
EQUIPMENT
AstralPool Bike
New
AstralPool Bike
Pool exercise bike, made of AISI 316L stainless steel with an electropolished finish, which extends its durabil-
ity in water media. Ergonomic design, thanks to which the height of the handles, saddle and base of the bike
can be adjusted depending on the pool depth and height of users. The pedals have been designed to be used
barefoot and adapt to different foot shapes and sizes, which gives users a great feeling of comfort and safety
when they are pedalling. Ideal for public and private pools.
AstralPool Bike 52089 1 20 0.12
Loungers
New
Marina loungers
Outdoor canvas loungers, available in three finishes.
Dimensions 73 x 190 x 35 cm.
Four reclining positions.
58385 / 58385-PA Packaging Weight kg Volume m3
Blue Marina lounger - Pack of 2 units 58385 1 - -

Blue Marina lounger - Pallet of 25 units 58385-PA 1 - -
Yellow Marina lounger - Pack of 2 units 58386 1 - -
Yellow Marina lounger - Pallet of 25 units 58386-PA 1 - -
Beige Marina lounger - Pack of 2 units 58387 1 - -
Beige Marina lounger - Pallet of 25 units 58387-PA 1 - -
Beige Marina lounger (grey frame) - Pack of 2 units 58387-GR 1 - -
58386 / 58386-PA Beige Marina lounger (grey frame) - Pallet of 25 units 58387-PA-GR 1 - -
Packs of two loungers will be sent for orders of items with code numbers 58385, 58386 and 58387.
58387-GR / 58386-PA-GR
59
S I G N A T U R E
AstralPool Signature ornamental water features
Pluvium Water games and ornamental water features

AstralPool Signature Ornamental water features for residential pools add a touch of elegance without forgetting
its main function: to increase the well-being of the swimmer. We present the PLUVIUM cannon and waterfall.
They combine Ipe wood and stainless steel AISI 316 satin finish. These new products complement the range
of Pluvium showers by AstralPool Signature. 3 years guarantee.

Pluvium Cannon, 7 m3/h, 5 m.c.a. 45868 1 11 0.089

Pluvium Waterfall, 12 m3/h, 2 m.c.a. 45869 1 31 0.284
The water features do NOT include anchoring, pump, control panel nor suction system. AstralPool suggests the
following anchoring systems:
Pluvium Cannon anchoring 45872 1 2 0.005

Pluvium Waterfall anchoring 45873 1 3.5 0.015
NOTE: The water features

do not include anchoring,
pump, control panel or
suction system.
705
675
982
956
560
180
139
140
204
538
500
60
POOL SURROUND
EQUIPMENT
NOTE: The water features do not Water games and Ornamental water features
include anchoring, pump, control
panel nor suction system.
New range of waterfalls for residential swimming-pools made of 316 stainless steel. The range is made up of
three waterfalls with differentiated and updated designs.
New
Classic waterfall
In Stainless Steel AISI-316
Classic waterfall 57095 1 - -
New
Straight waterfall
Straight waterfall 57096 1 - -
New
One waterfall
One waterfall 57097 1 - -
CDIGO/CODE: 57097
PRODUCTO: CASCADA H-700 A-500 ONE
.
CDIGO/CODE: 57095 PRODUCT: CASCADE H-700 A-500 ONE

.
CODIGO/CODE: 57096
PRODUCTO: CASCADA H-700 A-500 CLASIC AISI-316
.
PRODUCTO: CASCADA H-700 A-500 STRAIGHT AISI-316

.
PRODUCT: CLASIC WATERFALL AISI-316

.
PRODUCT: STRAIGHT WATERFALL AISI-316

.
57095 57096 57097

500 500 475
500
470
310
730
160
670
700
670
R.Ext.
147
R.Ext.
145
2" GAS
580 2" GAS
443
470
560
560
140
140
500
735
600
70
325 R.Ext.
2"GAS
61
Rev: 00
DIMENSIONES Ao/Year: 2010
DIMENSIONS Pg./Page: 1/1
ESP / ENG
CODIGO/CODE: 52241
PRODUCTO: CASCADA RESIDENCIAL A-500 AISI-304
.
PRODUCT: CASCADE RESIDENTIAL A-500 AISI-304

.
Curtain domestic
Curtain domestic in polished stainless steel. Anchoring with screws and bolts.
Curtain A-350. 12 m3/h 52244 1 10 0.12

Curtain A-500. 18 m3/h 52245 1 15 0.24
500 471
481
376
R. EXT. 1" BSP 299
Archivo Pieza: PT-17-10-4100
Suction inlet *Optional

Code Pump Control panel
for concrete pools Push button + Switch
52244 00302 x 2 38771 25719 04047 + 04050
52245 00302 x 2 38773 25719 04047 + 04050
*Optional: components for the activation of the waterfool from the swimming-pool.
Cannon domestic
Cannon domestic in polished stainless steel. Anchoring with screws and bolts.
Rev: 00
AISI-316 S.S. DIMENSIONES Ao/Year: 2010 Rev: 00
DIMENSIONS Pg./Page: 1/1 DIMENSIONES Ao/Year: 2010
Circular. 5 m3/h, 2 m.c.a. 52242 1 DIMENSIONS
ESP / ENG3 0.12 Pg./Page: 1/1
ESP / ENG
Flat. 15 m3/h, 2 m.c.a. 52242
CODIGO/CODE: 52243 1 5 0.13
PRODUCTO: CAON RESIDENCIAL CIRCULAR AISI-316 CODIGO/CODE: 52243
.
AISI-304 S.S.PRODUCT: CIRCULAR CANYON RESIDENTIAL AISI-316

.
PRODUCTO: CAON RESIDENCIAL BOCA PLANA AISI-316

.
PRODUCT: RESIDENTIAL FLAT CANYON MOUTH AISI-316

.
Circular. 5 m3/h, 2 m.c.a. 52238 1 - -

Flat. 15 m3/h, 2 m.c.a. 52239 1 - -
757
757
43
615
537
43
266
163 R. EXT. 1" BSP R. EXT. 1" BSP
52242 52243
Suction inlet DETALLE BOQUILLA *Optional

Code Pump Control panel
145
for concrete pools Push button + Switch

145
52242 00302 38769 25718 04047 + 04050

339
52243 00302 x 2 38771 25719 434 04047 + 04050
52238 00302 38769 25718 04047 + 04050
52239 00302 x 2 38771 25719 04047 + 04050

*Optional: components for the activation of the waterfool from the swimming-pool.
62
POOL SURROUND
EQUIPMENT
Waterfalls
Stainless Steel AISI-316.
Width 300 mm. connection 11/2 05577 1 6.9 0.06
Width 600 mm. connection 2 05578 1 11.9 0.09
Anchoring Suction Control Box

Feature Base
Pump Manual Pneumatic press button
code cover Concrete Liner Concrete Liner
switch Concrete Liner
05577 - - - 19987 x 1 20091 x 1 38770 19988 07669 07868
05578 - - - 19987 x 2 20091 x 2 38776 19989 17154 17155
Note: The pneumatic switch includes: control box, wall conduits and switch.
SilkFlow waterfall
Waterfall made of corrosion resistant ABS. Can be fed through the return circuit of the pool filter or pump.
Waterfall 300 mm 45205 1 1.19 0.012

Waterfall 600 mm 45206 1 2.36 0.021
Waterfall 900 mm 45207 1 3.45 0.003
Waterfall 1200 mm 45208 1 4.62 0.004
Waterfall 1800 mm 45290 1 7.0 0.057
New
Waterfall 2400 mm 45901 1 9.5 0.073
A B C D
waterflow
waterfall waterfall length at the pool waterfall height distance to water work-
Code required Pump size HP
length surface (working with l/min/m suggested ing with l/min/m
l/min/m
suggested) suggested
45205 50 0.5 300 mm 200 mm 300 mm 300 mm
45206 100 0.5 600 mm 500 mm 600 mm 300 mm
45207 150 0.75 900 mm 800 mm 900 mm 300 mm
45208 200 0.75 1200 mm 1100 mm 900 mm 300 mm
63
Overflow gratings
GENERAL NOTE FOR ALL MODELS

Made of stabilised Polypropylene against U.V. rays.
Standard white colour. Please enquire for other colours.
Channel width
These are supplied as modules of gratings for straight or
curved runs (outer radius of 1 or 2 metres). The gratings
Grating tile
click together with a male-female pressure fit permit-
ting a certain amount of flexibility in assembly which
absorbs any expansion which may occur when the tiles
are exposed to heat fluctuacions.
For all types of gratings it is necessary to construct the
channel 5 mm wider than the grating itself, to allow for
ease of removal and for expansion.
Channel width Grating width

200...............................195
250...............................245
300...............................295
350...............................345
Height of grating (h) varies according to model.

Longitudinal model h = 24 mm INLET
Code 00302
Transversal model h = 22 mm and h = 35 mm
LONGITUDINAL MODEL
0% water
The longitudinal design of the tiles ensures that any

excess water from the pool is not allowed to overflow onto
the pool deck, maintaining the area dry.
100% water
STRAIGHT TILE CURVED TILE Model L L1 h A r.1m. r.2m.

END PIECE
05581 200 195 24 206 - -
STRAIGHT
05582 250 245 24 206 - -

TILE
05583 300 295 24 206 - -

05584 350 345 24 206 - -
06420 200 195 24 - - -
END PIECE
06421 250 245 24 - - -

06422 300 295 24 - - -
06423 350 345 24 - - -
DETAIL
64
POOL SURROUND
EQUIPMENT
Grating can be made to order in

any of the colours available.
Overflow gratings
For further information, contact
your AstralPool deale.
Parallel grating tile

Made of PP, stabilised against UV rays. Gratings are locked together with male-female hooks (5 units =
1,024meters) Their flexibility allows them to bend up to a 5 m radius.
Height 24 mm, width 195 mm 05581 45 16.2 0.080

End piece kit for parellel grating

AISI-304 slate, made of PP with chemical stabalizers to protect from UV rays. Made to adapt to the last tile in
case it cutting is needed.
Grating support profile
S.S. corner support section
Grating end piece
Perimeter grating
Range of overflow grating for swimming pools. Made in homopolymer Polypropylene, with additives to protect
against UV rays. Available in 500 mm long modules with male-female hooks for easy and fast assembly.
Longitudinal grating 0.5 m 28664 20 19.9 0.080

Height 22 mm. Width 195 mm
65
Overflow gratings
Modular transversal grating for curves

Made of PP stabilised against UV rays. Assembled together by modular fitting. According to EN-13451-1
standard (8 mm). Available in 5 colours. 53 units per metre. Other grating colours can be supplied on request.
For further information, please contact your AstralPool distributor.
MODULAR GRATING FOR CURVES

MODULAR GRATING FOR CURVES (REVERSIBLE)
Dark brown RAL 8002 AstralPool blue RAL 5003
Ivory RAL 1015 Liner blue RAL 5024 Colour Code

White -
RAL 1015 CL90
RAL 8002 CL109
RAL 5003 CL60
RAL 5024 CL 108
Standard white
Channel Grating
Code h R r
Width (L) Width (L1)
34190 22 200 195 645 450
34191 22 250 245 825 580
34192 22 300 295 1055 760
34193 22 340 335 1155 820
34194 35 200 195 645 450
34195 35 250 245 825 580
34196 35 300 295 1055 760
34197 35 340 335 1155 820
Measurements in mm
Modular grating for curves

Modular grating for curves. PP material with stabilizers to protect against UV rays. Union for setting coupling
between modules. According to EN-13451-1 (8 mm). Slip Resistance Class 3 (Rd> 45) according to the
UNE-ENV 12633.

your AstralPool dealer.
66
POOL SURROUND
EQUIPMENT
Overflow gratings
Modular transversal gratings for curves

Made of PP, stabilised against UV rays. Assembled together by modular fitting (45 units per ml).
MODULAR GRATING FOR CURVES

MODULAR GRATING FOR CURVES (REVERSIBLE)
Channel Grating
Code h R r
11107 22 200 195 445 250
11108 22 250 245 545 300
19202 22 300 295 645 350
19203 22 340 335 785 450
00220 35 200 195 445 250
00221 35 250 245 545 300
00222 35 300 295 645 350
00223 35 340 335 785 450
Measurements in mm.
Transversal grating
Made of PP, stabilised against UV rays. Assembled together by a pass-through cable (49 units per metre).

Channel Grating
Code h
00212 200 195 22
00213 250 245 22
Plasticized steel cable

2.5 mm. To assemble straight modular gratings.
00214 1000 m 21.0 0.036
Stainless Steel AISI-316 plasticized cable

2.5 mm. To assemble straight modular gratings.
00215 1000 m 21.0 0.036
67

Overflow gratings
your AstralPool dealer.
Locking pins for cable

Made of brass.
00216 100 1.5 0.001
Transversal grating tile

Made of PP, stabilised against UV rays. Tiles are hooked together by male-female hooks. (5 units = 0.975m).
Channel Grating
Code h
00217 250 245 22
00218 300 295 22
00219 340 335 22
Grating support profile

Suitable for 22, 24 and 35 mm grating heights. Made of plastic. Supplied in 2 m lengths. Inside measurement
24 mm x 37 mm.
00224 25 13.2 0.033
90 Corner tiles for overflow channels

Made of injected white copolymer Polypropylene.

2 holes 4 mm
Code A H L P
22379 245 22 195 127
22380 295 22 245 127
22381 345 22 295 127
22382 385 22 335 127
22383 245 35 195 -
22384 295 35 245 -
22385 345 35 295 -
22386 385 35 335 -
Measurements in mm.
68
POOL SURROUND
EQUIPMENT
Overflow gratings
Stainless Steel longitudinal grating and Stainless Steel 90 corner

Longitudinal overflow grating, made in Stainless Steel. It is necessary to construct the channel 5mm wider than
the grille itself, to allow for easy assembly.
It is made up of straight sections of AISI-304 Stainless Steel, 500 mm in length. Straight sections can be
made-to-measure in order to fit the length of the swimming pool.
The 90 corner is made of Stainless Steel and is the perfect complement to the Stainless Steel longitudinal
grating. Metal with non-slip surface. 4 models with different sizes according to the width of grating used.
Height: 35 mm.
Stainless Steel longitudinal grille 195 mm 32415 - - -
Stainless Steel 90 corner 195 mm 32729 - - -

Grating Corner
L1 L2
code code
32415 32729 195 200
32416 32730 245 250
32417 32731 295 300
32418 32732 345 350
69
Pool shell equipment
70
Pool shell
equipment
Pool
shell
equipment
Concrete pools
73 Skimmers 15 l
74 Skimmers 17.5 L
76 Skimmer Accessories
77 S.S. Skimmers
79 Skimmer accessories in S.S.
79 Water level regulators
80 Main drains
86 ABS inlets
89 S.S. inlets
90 Wall conduit
91 Winter accessories
Liner and prefabricated pools

92 Skimmers 15 L
93 Skimmers 17 L
94 Skimmers 17.5 L
96 Main drains
100 Main drain accessories
100 Water level regulators
101 ABS inlets
105 S.S. inlets
106 Wall conduits
107 Packs of pool shell materials

108 Skimfilters
109 Installation diagrams
71
Norm
Material empotrable
Recessed materials
Safety in en
Seguridad
la piscina
public pblica.
pools
Nueva familia
New family compuesta
made up of ABS de
skimmers,
skimmers, sumideros
main drainsy and
boquillas
de ABScompliant
inlets de acuerdo constandard
with las
especificaciones
EN-13451-1/3:2012de la norma
EN-13451-1/3:2012
17.5-l skimmers and all products
Skimmers
in the NORM de 17,5L,
family ysuitable
toda la for
familia
NORM apta para piscinas de
concrete and prefabricated pools
hormign y prefabricadas
Main drains with anti-vortex and
Sumideros
flat grills con rejillas antivortex y
planas
Return inlets
Boquillas with a maximum
de impulsin flow
con un caudal
rate of 2.3 m 3
/h
mximo de 2,3 m3/h
Nuevarange
New gamaofde sumideros de
polyester
poliester
main acuerdo
drains con las
compliant with
especificaciones de la norma
standard EN-13451-1/3: 2012
EN-13451-1/3: 2012
Main drains with anti-vortex and
Sumideros con rejillas
flat grills from 75 to 200antivortex
y
planas de 75 a 200
72
Pool shell
equipment
Concrete pools - Skimmers 15 l
All exposed skimmer parts are UV resistant. In white ABS with silent weir flap and flow regulation plug. G
11/2 female - G 2 male threaded lower suction connections. 50 mm solvent connection also provided.
Overflow connection 40 mm. Basket secured to base with bayonet fixing. Recommended flow 5 m3/h. We
recommend installing one skimmer for every 25 m2 of water surface area.
Skimmer with standard mouth opening

Round lid 00249 1 2.95 0.059
Round lid, NPT outlets 07455 1 - -
Square lid 00250 1 3.15 0.059
Skimmer with wide mouth opening

Round lid 00251 1 4.47 0.12
Square lid 00252 1 3.00 0.12
Optional colour
73
Concrete pools - Skimmers 17.5 L
All exposed skimmer parts are UV resistant. In white ABS with silent weir flap and flow regulation plug. G
11/2 female - G 2 male suction connections. 50 mm solvent connection also provided. Overflow con-
nection 32 mm. Lid with clip fastening system with lid height adjustment to fit surround perfectly.Basket
secured to base with bayonet fixing. Weir flap included. Recommended flow 7.5 m3/h. We recommend
installing one skimmer for every 25 m2 of water surface area.
Skimmer with standard mouth opening

Round lid 05589 1 4.20 0.062
Square lid 11306 1 4.20 0.062
Skimmer with standard mouth opening and decorative face plate

Round lid 05280 1 5.10 0.062
Square lid 11302 1 5.20 0.062
int. 2" int. 11/2"
Skimmer with extended throat and standard mouth opening

Round lid 05590 1 4.85 0.077
Square lid 11307 1 5.90 0.077
74
Pool shell
equipment
Concrete pools - skimmers 17.5 L
Skimmer with standard mouth opening, extended throat and face plate

Round lid 05281 1 5.09 0.077
Square lid 11303 1 5.75 0.060
int. 2" int. 11/2"
Skimmer with wide mouth opening

Round lid 05282 1 6.20 0.135
Square lid 11304 1 6.24 0.135
int. 2" int. 11/2"
Skimmer with extended throat and wide mouth opening

Round lid 05283 1 6.75 0.161
Square lid 11305 1 6.90 0.161
int. 2" int. 11/2"
Versions of the 17.5 litre skimmer can be supplied with throat extensions
much larger than those stated above. This could be of particular interest when
using wider coping stones than the usual width.
75
Concrete pools - Skimmer Accessories
15 lts skimmer cover extension ring

Additional spacer ring to increase distance between 15 l skimmer and lid. 25 mm lengthening distance. Made
in ABS. Height can be increased by overlaying various connections. Can also be slightly tipped to level with
ground.
19919 17 4.08 0.069
17.5 lts skimmer cover extension ring

Additional ring for better adjusting and levelling 17.5 l skimmer lid to the deck level. 20 mm lengthening
distance. Made in white ABS. Height can be millimetrically gauged by overlaying various rings. Can also be
slightly tipped to level with ground.
18153 17 4.70 0.069
Floating weir assembly in ABS

Complete with strainer basket in white ABS.
For 15 l skimmers 00253 12 20.5 0.207

For 17.5 l skimmers 05703 12 20.5 0.207
Bag for skimmer strainer basket

Hyginic residue retention throw away bag placed inside the skimmer basket to protect the filter and obtain the
high-est efficiency level. Suits all skimmer types with baskets till 24 cm.
12 units per box 25768 12 0.40 0.006
76
Pool shell
equipment
Concrete pools - S.S. Skimmers
A-100 S.S. skimmer

Made of S.S. AISI-316. With 50 mm overflow with S.S. lid and strainer basket, both included. Provided with
space for installing water level regulating valve 00256. With earth connection. Recommended flow: 7.5m3/h.
Suction connection 2 00254 1 8.4 0.04
Decorative frame
For 00254 skimmer. Made in S.S. AISI-316.
00255 1 0.62 0.003
Skimmer body A-201

In S.S. AISI-316. With 50 mm overflow. Skimmer housing without telescopic lid. Provided with space for
fitting water level regulating valve 00256. With earth connection.
Suction connection 63 mm 07520 1 6.51 0.04
77
Concrete pools - S.S. skimmers
Skimmer body A-202

Made of S.S. AISI-316. With 50 mm overflow. Skimmer housing without telescopic lid. With earth connec-
tion.
Suction connection 63 mm 07610 1 5.25 0.04
Skimmer strainer basket for A-201 and A-202

Made of S.S. AISI-316. Includes face plate for direct removal through skimmer mouth.
07521 1 2.19 0.02
Skimmer body A-400

Made of S.S. AISI-316. With 50 mm overflow. Skimmer housing without telescopic lid. Provided with space
for fitting water level regulating valve 00256. With earth connection.
Suction connection, 63 mm 07523 1 8.0 0.06
78
Pool shell
equipment
Concrete pools - S.S. skimmers
Skimmer strainer basket for A-400 skimmer

Made of S.S. AISI-316. For direct removal through skimmer throat.
07522 1 3.5 0.04
Concrete pools - Skimmer accessories in S.S.
Telescopic lid
Made of S.S. AISI-316. For skimmer models A-201, A-202 and A-400. Square lid 180 x 180 mm. Adjustable
height from 60 to 110 mm.
07524 1 1.63 0.01
Water level regulating valve

Valve to be fitted into all S.S. skimmer models, except in model A-202. Adjustable buoy. Connection 3/8.
00256 1 0.21 0.002
Concrete pools - Water level regulators
Water level regulator

Made in ABS. Installed by lateral or inferior connection, as required. Knockout outlets. Height and level adjust-
able cover. Compatible with any type of skimmer.
15862
1 2.0 0.016
79
Concrete pools - Main drains
All main drains made in plastic are provided with UV protected grilles.
Public pools require:
- Water velocity 0.5 m/sec
- Maximum suction velocity in pipe 1.5 m/sec
- Minimum distance between drains: >2 m
Circular main drain 270 mm with grille in ABS

Made totally in white ABS, 1" bottom connection and 2 side connections which can be plugged from the
inside for pressure testing. 11/2 bottom connection with plug or for fitting the hydrostatic relief valve (00277)
& drainage tube (21581). Grille cover diameter 250 mm. Maximum flow rate: 13 m3/h.
Standard thread 01466 4 5.0 0.045

NPT thread 06579 4 - -
Circular main drain, 2 outlet

Body and grille in white ABS. Grille fixed with screws. Maximum flow: 13 m3/h.

Optional colour
Circular main drain 200 mm with antivortex grille

Made in ABS. Side connection 2 and bottom connection 11/2 with knockout sockets. Drainage pipe (21581)
can be fitted. Maximum flow: 13m3/h.
B-B Section Plan view
80
Pool shell
equipment
Circular main drain 200 mm with flat grille

Made in white ABS. Side connection 2 and bottom connection 11/2 with knockout sockets. With bottom
knockout sockets closed which allow to open the appropriate one when ever necessary.
Maximum flow: 13m3/h.
27839 1 2.651 0.028
B-B Section Plan view
New
NORM main drain in ABS
New range of drains complying with standards EN 13451-1 and EN 13451-3 suitable for public and private
swimming pools. Available with either flat grilles or antivortex lids. White ABS with UV treatment, side outlet
connections 2", bottom outlet 1 1/2".
Rev. 00

DIMENSIONES Ao / Year: 2012 Packaging Weight kg Volume m3
DIMENSIONS Pg./Page
ESP / ENG
1/1
Flat grille 56378 4 10.60 0.069

CDIGO / CODE:
Antivortex lid 56378 56379 4 10.60 0.069
DESCRIPCIN: SUMIDERO NORMA PH REJILLA PLANA
56378 DESCRIPTION: MAIN DRAIN NORMA CONCRETE POOL
226 189
3
80
95
222
225
G 2"
55,5
55,6
56379 63,2
SECCIN A-A
Square main drain with ABS grille 210 mm x 210 mm

165
A in white ABS. Grille fixed

Side connection 2. Body and grille A with screws. Maximum flow: 13m3/h.
00258 4 4.0 0.044
Superfcie rejilla: 122 cm2

Caudal mximo aspiracin: 18 m3/h
Nota: Unidades en mm
Note: Units in mm
81
Circular S.S. main drain, 2" outlet

Side connection 2. In S.S. AISI-316. Grille fixed with screws. Maximum flow: 13 m3/h.
Side connection 2 00268 1 2.56 0.02

Side connection 2 and bottom connection 11/2 26196 1 2.80 0.02
00268 26196
Main drain with square lid in S.S., 2" outlet

Side connection 2. Made in S.S. AISI-316. Antivortex lid. Can be used with liner and prefabricated pools with
liner adaptor kit 00276. Maximum recommended flow: 6 m3/h.
00269 1 1.14 0.01
Main drain in polyester and fibreglass - 330 mm x 330 mm

Gel-coat finish. With optional hydrostatic valve.
Grille in S.S. AISI-316. Slots < 8 mm

Solvent socket Grille Flow
outlet connection
75 mm AISI-316 16 m3/h 20282 1 5 0.047
90 mm AISI-316 22 m3/h 20283 1 5 0.047
110 mm AISI-316 33 m3/h 20284 1 5 0.047
ABS grille UV protected

outlet connection
75 mm Plastic 16 m3/h 22359 1 4.5 0.034
90 mm Plastic 22 m3/h 22360 1 4.5 0.034
110 mm Plastic 33 m3/h 22361 1 4.5 0.034
125 mm Plastic 43 m3/h 22362 1 4.5 0.034
Max. recommended flow according to EN 13451-1 Standard.

Main drain and anti-vortex
grill available in US custom-
ary units
82
Pool shell
equipment
New
NORM main drains - 515 mm x 515 mm
New range of main drains that carry out with the standard EN-13451-1/3 2012. Manufactured with poliester
resin and fiberglass. Grille in Stainless Steel or ABS. It carries out with the standard EN-13451-1/3 2012.
Optional hidrostatic valve.
Grille in S.S.
outlet connection
110 mm S.S. 42 m3/h 20285N 1 16 -
125 mm S.S. 51 m3/h 20286N 1 17 -
140 mm S.S. 66 m3/h 20287N 1 18 -
160 mm S.S. 95 m3/h 20288N 1 19 -
200 mm S.S. 103 m3/h 20289N 1 20 -
ABS Grille
outlet connection
110 mm ABS 42 m3/h 28709N 1 15 -
125 mm ABS 51 m3/h 28710N 1 16 -
140 mm ABS 66 m3/h 28711N 1 17 -
160 mm ABS 95 m3/h 28712N 1 18 -
200 mm ABS 103 m3/h 28713N 1 19 -
Max. recommended flow: 103 m3/h (0.5 m/s).
Available in
US customary units
A (mm) B (mm) C (mm) D (mm)
110 330 252 400 280
125 330 252 400 280
140 515 412 585 390
160 515 412 585 390
200 515 412 585 390
Main drain in polyester and fibreglass - 515 mm x 515 mm

Gel coat finish. With optional hydrostatic valve.
Grille in S.S. AISI-316. Slots < 8 mm

outlet connection
110 mm AISI-316 33 m3/h 20285 1 11.5 0.132
125 mm AISI-316 43 m3/h 20286 1 11.5 0.132
140 mm AISI-316 54 m3/h 20287 1 11.5 0.132
160 mm AISI-316 70 m3/h 20288 1 11.5 0.132
200 mm AISI-316 100 m3/h 20289 1 11.5 0.132

outlet connection
110 mm Plastic 33 m3/h 28709 1 11.5 0.132
125 mm Plastic 43 m3/h 28710 1 11.5 0.132
140 mm Plastic 54 m3/h 28711 1 11.5 0.132
160 mm Plastic 70 m3/h 28712 1 11.5 0.132
200 mm Plastic 100 m3/h 28713 1 11.5 0.132
Max. recommended flow according to EN 13451-1 Standard.
83
Concrete pools - Main drain accessories
Hydrostatic valve
To alleviate pressure that underground water can build up under the pool shell, it is recommended that a
hydrostatic valve & drainage tube are fitted to a main drain.
Hydrostatic valve: To thread into the bottom of main drain with 2" outlet. Made of white ABS with screw and
spring in S.S. Male thread 11/2.
00277 4 1.0 0.003
Drainage tube
For hydrostatic valve. 11/2 BSP threading for 01466, 27837 and 27839 main drains. In UV resistant ABS.
21581 24 3.54 0.021
Flush antivortex lid

New flush design to allow unobstructed passage of cleaners. Complies with EN 13451-1: 2000 Standard.
415 x 415 mm lid suitable with the following drains:
With S.S. grille: With plastic grille:
- 20282 - 22359
- 20283 - 22360
- 20284 - 22361
- 22362
570 x 570 mm lid suitable with the following drains:

- 20285 - 28709
- 20286 - 28710
- 20287 - 28711
- 20288 - 28712
415 mm x 415 mm. Height: 70 mm 25344 1 2.25 0.012

570 mm x 570 mm. Height: 60 mm 28556 1 4.00 0.032
Drain grille of 200 mm

Ring support and grille in white ABS. Supplied with grille fixing screws.
00280 10 3.0 0.031
Drain grille in S.S. of 200 mm

Support ring in white plastic, grille in S.S. AISI-316. Supplied with grille fixing screws. Recommended max.
flow: 13 m3/h.
00279 10 6.0 0.02
84
Pool shell
equipment
Concrete pools - Drain grilles
Drain grille in S.S. of 300 mm

Support ring in Aluminium, grille in S.S. AISI-316. Supplied with grille fixing screws. Recommended max.
flow: 27 m3/h.
00282 4 5.8 0.02
Drain grilles
Stainless steel frame. Stainless steel grille. Supplied with grille fixing screws. Other dimensions can be sup-
plied on order.
AISI-304
Size (mm) Max. recommended flow
200 x 200 15 m3/h (0.5 m/s) 00284 1 1.2 0.01
300 x 300 43 m3/h (0.5 m/s) 00285 1 2.2 0.01
400 x 400 83 m3/h (0.5 m/s) 00286 1 4.0 0.03
500 x 500 136 m3/h (0.5 m/s) 00287 1 4.5 0.04
AISI-316
Size (mm) Max. recommended flow
200 x 200 15 m3/h (0.5 m/s) 30764 1 1.2 0.01
300 x 300 43 m3/h (0.5 m/s) 30765 1 2.2 0.01
400 x 400 83 m3/h (0.5 m/s) 30766 1 4.0 0.03
500 x 500 136 m3/h (0.5 m/s) 30767 1 4.5 0.04
CODE L A CODE L A
00284 223 187 30764 223 187
00285 323 287 30765 323 287
00286 423 387 30766 423 387
00287 523 487 30767 523 487
Drain grilles range

Manufactured in compliance with EN 13451-1:2000 standard. Available in stainless steel and plastic. Frames
are made in polyester and fibreglass with a gel-coat finish. Possibility of mounting antivortex lids (codes 25344
and 28556).
Main drain grille in stainless steel
490 mm x 490 mm 28560 1 5.0 0.029
Main drain grille in plastic
490 mm x 490 mm 28561 1 4.7 0.029
Main drain grille in stainless steel
345 mm x 345 mm 28562 1 3.0 0.029
Main drain grille in plastic
345 mm x 345 mm 28563 1 2.9 0.029
Drain grilles for residential pool

New range of Drain grilles for use in residencial and comercial swimming pool applications. Available in plas-
tic or stainless steel. Frames made in plastic. Grilles designed according to standard EN-13451-1:200. Excel-
lent finish.
Drain grille 252 x 252 mm in plastic 34331 1 - 0.0129
Drain grille 252 x 252 mm in S.S. 34332 1 - 0.0129
Drain grille 410 x 410 mm in plastic 34333 1 - 0.0540
Drain grille 410 x 410 mm in S.S. 34334 1 - 0.0540
85
Concrete pools - ABS inlets
MULTIFLOW SYSTEM
The eyeball has been marked with a series of "knock-out" sockets of 14, 20, and 25 mm, enabling the
desired flow to be selected at the time of installation.
Recommended max flow velocity 4 m/sec, complies with EN 13451-1: Standard
Flow rates: 14 mm = 2.2 m3/h, 20 mm = 4.5 m3/h, 25 mm = 7 m3/h
Return inlet Multiflow to glue

To glue into 50mm 10 bar pipe. Made in white ABS.
Standard inlet 24413 40 4.0 0.020

1 1/2 inlet in US customary units 06590 40 - -
Optional colour

Made of ABS in white colour. For glueing inside diam 50 mm PN10 pipes.
Standard inlet 33501 50 2.9 0.020

1 1/2 inlet in US customary units 33428 50 - -
Return inlet Multiflow (threaded)

2 male thread, inner 50 mm for glueing. Made in white ABS. Can be installed with wall conduits: 15658-
15659.
00295 24 4.35 0.020

To glue onto 63 mm, outside 6 bar pipe and inside 50 mm. Made in white ABS. Can be installed with wall
conduits: 15661-15660.

00298 24 4.24 0.020
Inlet suction nozzle for large flows

Inlet nozzles for large flows and they can be also be used as suction nozzle. Inlet flow rate 30m3/h for a maxi-
mum water flow velocity of 4m/s according to EN 13451-1 standard. Suction flow rate 5m3/h for a maximum
water flow velocity of 0.5m/s according to EN 13451-1 standard. PVC body, ABS grille, PA flange and AISI 304
screws, holes in grilles are not bigger than 8mm according to EN 13451-1 standard. 75 or 90 pipe con-
nection. The nozzle can be installed into the wall conduit 43590. 3 models available for Concrete poolss and
panel pools.
Inlet/suction nozzle for large flows 41520 16 4.20 0.021
and Concrete poolss
86
Pool shell
equipment
New
NORM inlet
New range of nozzles complying with standards EN 13451-1 and EN 13451-3, suitable for public and private
Rev. 00
DIMENSIONES
pools. In white ABS with UV treatment.
Ao / Year: 2012
DIMENSIONS Pg./Page
ESP / ENG
1/1
CODIGO / CODE: 56498 Code Standard Standard Standard

DESCRIPCION: BOQUILLA NORMA 115,5X57 PISC.H. ROSC.-ENC.
DESCRIPTION: NORMATIVE RETURN INLET THREADED CONCRETE P. Packaging Weight kg Volume m3
NORM Nozzle for Concrete pools 56498 24 4.5 0.020
A
50
8,
11
31
7,6
50,30
2" BSP
A SECCIN A-A
Return inlet
In white ABS UV resistant. 3 adjustable positions. (100%, 65%, & 35%). Max. flow rate: 13.5 m3/h complies
57,1
with EN 13451-1 Standard. Connection: 63 mm to glue on the outside.

9,4
15863 24 3.4 0.020

Note: Units in mm Caudal Max. 3,2m3/h
Concrete floor inlet

Return / Suction. Adjustable flow. Made in white ABS, screw in S.S. Max. flow rate: 12 m3/h complies with EN
13451-1 Standard.
2 male thread, inner 50 mm to glue 00303 24 5.0 0.020
NPT outlets 19821 24 5.0 0.020
To glue onto 63 mm PN 6, inner 50 mm 20140 20 4.4 0.021
Adjustable 3 Concrete floor inlet

Made in white ABS. Adjustable flow by rotating the grille. Suction surface area: 0.015 m2. Outer 295 mm.
Flow rate: 20 m3/h. (0.4 m/s.) Max. recommended flow rate: 26 m3/h. (0.5 m/s.) according to EN-13451-1
Standard.
Grille in S.S. AISI-304 08317 2 2.65 0.047
Grille in white ABS 11796 2 2.65 0.047
Adjustable floor inlets with swivel join

Swivel body in PVC. Lid in ABS. Regulating screw in POM. Max. flow rate: 9.5 m3/h. To be fixed on 75 mm
pipe and wall conduit 21248.
22353 24 4.1 0.022
21248
87
Wall conduit
Wall conduit appropiate to glue the swivel joint floor inlet code 22353. 50 mm inside and 63 mm outside di-
ameter.
21248 12 7.3 0.032
Concrete suction nozzle

To glue to 63 mm 6 bar pipe and 50 mm solvent internal. Made in white ABS. Plug thread 11/2. Recom-
mended to be installed with wall conduits 15661 & 15660.
Standard inlet 00300 24 3.62 0.020

Inlet in US customary units 23579 24 - -

2 male thread, 50 mm solvent internal. Maxim pressure: 6 bar. Made in white ABS. Plug thread 11/2.
Recommended to be installed with wall conduits 15658 & 15659.
Standard inlet 00301 24 3.8 0.020

NPT outlet 06594 24 - -

To glue to 50 mm 10 bar pipe. Made in white ABS . Plug thread 11/2. End connection 07958 and push fit
connection 01393. Recommended to be installed with wall conduits 15658 & 15659.
24415 60 3.72 0.02

Optional colour
Overflow channel drainage point

Body and grille in ABS. Screws in S.S. To be glued to 63 mm pipe. Particulary suitable for overflow gutters
and to be used as a lateral suction point for pools using the Net'n'Clean infloor cleaning system. Max. recom-
mended flow rate: 7 m3/h.
00302
12 3.1 0.016
Overflow
Drainage point
Suction nozzle for overflow pools with liner

PVC body, PA flange and Stainless Steel screws. Suction flow rate 7m3/h for a maximum water flow velocity of
0.5m/s according to EN 13451-1 standard. 75 or 90 pipe connection. Double gasket.
41519 12 4.83 0.021
88
Pool shell
equipment
Hydromassage kit
Consists of a return inlet and wall conduit fitted with an air inlet and a venturi jet. Two wall conduit lengths.
50 mm water connection pipe and 20 mm air suction pipe.
Hydromassage kit for Concrete poolss:

Length of wall conduit 195 mm 32113 12 3.5 0.021
Hydromassage kit for Concrete poolss with liner:

Concrete pools - S.S. inlets
Return inlet
Male thread 11/2. Made in S.S. AISI-316. Recommended max. flow 4.5 m3/h. Complies with EN 13451-3
Standard. Ball 20 mm.
Length 35 mm 32994 1 0.3 0.001
Length 50 mm 16325 1 0.3 0.001
Length 70 mm 16326 1 0.5 0.001
Adjustable pool floor return inlet

Male thread 2. Made in S.S. AISI-316. For both concrete and prefabricated pools. Water flow can be adjusted
by the central screw. Recommended max. flow 14 m3/h. Complies with EN 13451-3 Standard.
15839 1 0.9 0.002
Suction point
Male thread 11/2. Made in S.S. AISI-316. Requires the fitting 05684.
Length 50 mm 16328 1 0.2 0.001

Length 50 mm with lid 21644 1 0.3 0.001
Adjustable concrete return inlet

Chromed brass, body grille in S.S. AISI-304.
Max. flow 21 m3/h female thread 2 00312 12 7.0 0.013

Max. flow 40 m3/h female thread 3 00313 6 10.0 0.014
89
Concrete pools - S.S. inlets
Suction point with sliding cover

Chromed brass body with S.S. AISI-304 lid. Push fit. 2 female thread (01392 coupling is required for hose).
00315 12 8.0 0.008
Suction point with threaded cover

Chromed brass. Female thread 2. (01395 coupling is required for hose).
00317 12 10.0 0.012
Concrete pools - Wall conduit
Range of 300 mm long conduits for 2 inlets and Multiflowmodels, that can easily be cut to required
lengths depending on the pool wall thickness. Made in ABS. The flanged rib has 2 holes for positioning
within the pool shell.
Rear 2 male thread and inside 50 mm solvent socket

2 front female thread
for 2 male thread return 15658 15 4.3 0.040
59.3 mm solvent internal for

returns suitable for gluing in to 63 mm
6 bar pipe & light MINI 33684 15661 15 4.2 0.040
Rear 63 mm solvent weld and inside 50 mm solvent weld

for 2 male thread return 15659 15 4.2 0.040
Front 59.3 mm inner diameter for gluing
to 63 mm. 6 bar pipe & light
MINI 33684 15660 15 5.6 0.040
Models
Dimensions
15658 15661 15659 15660
A 250 250 250 250
B 175 175 175 175
C 2 59.3 2 59.3
D 300 300 300 300
E 50 50 50 50
F 2 2 63 63
90
Pool shell
equipment
Concrete pools - Wall conduit
PVC wall conduit

PVC grey colour.
150 mm length:
2" Male thread + inside 50 mm. Female thread 2" 00322 12 3.0 0.011
300 mm length:
2" female & male connection 00323 6 3.0 0.011
2 Rear male thread pipe connection,

inside 50 mm, solvent weld for 33684 light 00324 6 3.0 0.011
2" Male thread + inside 50 mm.

Female thread 1" 00325 6 3.0 0.011
2" Male thread + inside 50 mm. 50 mm 00326 6 3.0 0.011

special for 00289, 07957, 00304, 00305
and 00306 returns
Stainless steel wall conduits

Made of S.S. AISI-304. Both ends with male thread of 11/2. Earth connection.
Length 240 mm 00327 1 0.7 0.003

Length 340 mm 00328 1 0.8 0.005
Models
Dimensions
00327 00328
A 240 340
B 11/2 11/2
C 74 74
D 11/2 11/2
E 35 35
Concrete pools - Winter accessories
Winter plugs
To cover returns and prevents from possible frosts.
For 11/2 nozzles 06211 - - -

For 2 nozzles 06212 - - -
91
Liner and prefabricated pool - Skimmers 15 L
All skimmer parts exposed are UV resistant. In white ABS with silent weir flap and flow regulation plug.
G11/2 female, G 2 male threaded lower connections. 50 mm. drainage connection also provided.
Overflow connection 40 mm. Recommended flow rate: 5 m3/h. Advisable 1 skimmer for every 25m2 of
pool water surface. Skimmers are availabe in two different models, the model with inserts and the PARKER
model, supplied with self-tapping screws.
Skimmer with standard mouth

Supplied with adhesive gaskets, flanges, and screw kit.
Round lid fixed by pressure 01461 1 4.0 0.059

Square lid fixed by pressure 01462 1 4.2 0.059
Skimmer with wide mouth

Supplied with adhesive gaskets, flanges and screw kit.
Round lid fixed by pressure 01463 1 5.04 0.12

Square lid fixed by pressure 01464 1 5.28 0.12
Optional colour
92
Pool shell
equipment
Double joint kit for skimmer

Kits comprising a double joint and the screws necessary for the installation of skimmers in steel panel pools.
This prevents both the pool water and damp from the ground from coming into contact with the moulded area
and protects the panels from possible corrosion. It allows versions with inserts or self-tapping screws to be in-
stalled.
For wide mouth, insert 14516-0500 40 - 0.070

For wide mouth, self-tapping screws 14516-0600 40 - 0.070
For standard mouth, inserts 27124-0500 80 - 0.035
For standard mouth, self-tapping screws 27124-0600 80 - 0.035
Skimmer Panel Protect, inside assembly

Supplied with adhesive gaskets and flanges. Special skimmers for panelled pools. The wide throat assembly is
fixed on the inside of the panel. Each skimmer box includes the necessary glue.
Skimmer Panel Protect 15 l

wide mouth, round lid 32372 1 4.47 0.116
Skimmer Panel Protect 15 l
wide mouth, square lid 30866 1 5.13 0.116
Adhesive for ABS 30884 1 0.20 0.001
Liner adaptor kit for S.S. skimmer

For liner, prefabricated and panelled pools. Includes: 2 adhesive gaskets, faceplate in S.S. AISI-316 and fixing
screws.
For skimmer A-100, A-201 and A-202 07525 1 0.78 0.002
(00254, 07520 and 07610)
For A-400 (Code 07523) 07526 1 1.13 0.01
New
Skimmer SPS 250
New range 17-l skimmers suitable for installation in private pools. As they are short (250 mm), they are ideal
for installation in pools made of expanded polystyrene blocks. In addition, thanks to the way they are made they
take the water level up to the edge of the coping stone. Made of white ABS with UV protection, they also have
a weir flap, a flow regulator and a leaf trap. It is recommended that at least one skimmer be installed for every
25 m of surface area with a maximum flow rate 7.5 m/h. Connections under 63 mm and 2", and water
overflow connection of 32 mm.
Skimmer with inserts 58382 1 3.50 0.037

Skimmer without inserts 58609 1 3.50 0.037
93
Liner and prefabricated pool - Skimmers 17.5 L
All skimmer parts exposed are UV resistant. In white ABS with silent weir flap and flow regulation plug.
G11/2 female, G 2 male lower suction connections. 50 mm drainage connection also provided. Overflow
connection 40 mm. Secured to base with bayonet fixing system. Recommended flow rate: 7.5 m3/h.
Advisable 1 skimmer for every 25 m2 of pool water surface. Skimmers are available in two different models,
the model with inserts and the PARKER model, supplied with self-tapping screws.
Skimmer with standard mouth

Supplied with adhesive gaskets,
flanges, and screw kit.
Round lid 05284 1 5.30 0.062
Round lid NPT 28883 1 5.30 0.062
Square lid 11309 1 5.30 0.062
Square lid, PARKER model 11315 1 5.30 0.0
Skimmer with standard mouth and extended throat

Supplied with adhesive gaskets,
flanges, and screw kit.
Round lid 05285 1 5.90 0.077
Square lid 11310 1 5.90 0.077
int. 2" int. 11/2"
Skimmer with wide mouth

Supplied with adhesive gaskets
and flanges.
Round lid 05286 1 6.50 0.135
Round lid NPT 28884 1 6.50 0.135
Square lid 11311 1 6.52 0.135
int. 2" int. 11/2"
94
Pool shell
equipment
Liner and prefabricated pool - Skimmers 17.5 L
Skimmer with wide mouth and extended throat

DESCRIPTION / DESCRIPCION
Supplied with adhesive gaskets, flanges, and screw kit.
Cdigo Descripcin Packaging Weight kg Volume m3
Code Description
Round lid 07830 1 7.08 0.161
56176 SKIMMER 17,5 L , 495 X 80 CON INSERTOS
Square lid 11313 1 7.00 0.161
SKIMMER 17,5 L , 495 X 80 WITH INSERTS 11314
Square lid, PARKER model 1 7.00 0.161
56299 SKIMMER 17,5 L , 495 X 80 SIN INSERTOS
SKIMMER 17,5 L , 495 X 80 WIT HOUT INSERTS
int.
2. PACKAGING / EMBALAJE 11/2"
New
Packaging type: NORM
SimpleSkimmer
box Tipo de embalaje: Caja unitaria
Standard units:New
1 unit Unidades
range of skimmer 17.5 L complying withstandard:
standards EN1 13451-1
unidad and EN 13451-3, suitable for public and
private pools. In white ABS with UV treatment, new skimmer range incorporates gate, water-flow regulator,
Volume/Box dim: 650x570x485 Volumen/Dimensiones: 650x570x485
regulator height skimmer lid and basket. The water inlet is 495x80 mm. Recommended flow of 7.5 m / h and
Units per palette: 8 a skimmer every 25 square
install Unidades
meters of por
waterpalet: 8 Lower connections of 1 "1/2 and 2", higher excess
surface.
Manufacturer: water
Sacopa,connection of 40 mm.
S.A.U. Empresa productiva: Sacopa, S.A.U.
For prefabricated pools with inserts
3. DIMENSIONS / DIMENSIONES 56176 1 5.61 0.182
For prefabricated pools without inserts 56299 1 5.61 0.182
Inside assembly of Panel Protect skimmer

4. COMPETITION / COMPETENCIA
Skimmers for panelled pools. The wide mouth is to be fixed in the inside of the panel. Each skimmer box in-
cludes the necessary glue.
Overflow skimmer from Pools Skimmer Code Standard Standard Standard
boca desbordante de Pools
Skimmer Panel Protect 17.5 l
wide mouth, round lid 32373 1 6.20 0.137
Skimmer Panel Protect 17.5 l
wide mouth, square lid 30867 1 6.20 0.116
Adhesive for ABS 30884 25 5.05 0.129
________________________________________________________________________
Codi:R0513
Ed:230109
Resp. Ed.: O.T. -Aprov. Gerncia
Versions of the 17.5 litre skimmer can be supplied with exten-

sions much longer than those previously stated. This could
be of particular interest when using wider coping stones than
usual.
95
Liner and prefabricated pool - Main drains
All main drains made in plastic are provided with UV protected grilles.
In public pools require:
- Water flow velocity 0.5 m/sec
- Maximum suction velocity 1.5 m/sec
- Minimum distance between drains: >2 m
Recommended use: A WARNER safety device should be used for detecting vacuum and automatically
switching off pumps.
New
NORM main drains
New range of sinks complying with standards EN 13451-1 and EN 13451-3, suitable to be install in public
and private pools are supplied with flat grates or antivortex with. In white ABS with UV treatment, side outlet
connections 2 "bottom outlet 1" 1/2, the lower outlet covered with a kiss cutting.
With flat grate, with inserts 56380
Rev. 00 4 10.60 0.069
DIMENSIONES Ao / Year: 2012
With flat grate, without inserts DIMENSIONS 56381
Pg./Page 1/1 4 10.60 0.069
ESP / ENG
With antivortex grate, with inserts 56382 4 10.60 0.069
CDIGO
With antivortex 56380
/ CODE:grate, without inserts 56383 4 10.60 0.069
DESCRIPCIN: SUMIDERO NORMA PP REJILLA PLANA
DESCRIPTION: MAIN DRAIN NORMA PP FLAT GRILLE
inserto laton
brass insert
245
210
189,40
16,8
98
113
243
226
G 2"
56
56
63,20
SECCIN A-A
Mini drain
Side connection with 2 female thread. Made in white ABS with grille fixed to flange. Suction velocity at grille
0.5 m/sec and max. flow rate: 11 m3/h. Bottom connection with plug or to fit the hydrostatic relief valve &
drainage pipe. Slots < 8 mm. M5 threaded screws and brass inserts to secure flange and grille. Can also be
165
used in concrete spas and lateral suction inlet.

A Code Standard Standard Standard
A
Mini drain 27814 1 2.64 0.013
Superfcie rejilla: 122 cm2

Caudal mximo aspiracin: 18 m3/h
Note: Units in mm
Drain 290 mm for Liner. PARKER model

Made specially for liner pools, totally in white ABS, with self adhesive synthetic gaskets and S.S. screws. 2
side connections which can be plugged for pressure testing. 11/2 bottom connection with plug for fitting the
hydrostatic relief valve (00277) and drainage pipe (21581). Suction velocity 0.5 m/sec. Recommended max.
flow rate: 13 m3/h. Installed flush with floor bottom for total drainage.
00270 4 5.71 0.044

Parker model (with self tapping screws) 07880 4 5.71 0.044
96
Pool shell
equipment
Circular main drain 200 mm with antivortex grille

Made in ABS. Side suction connection 2 and bottom connection 11/2 with knockout sockets. Bottom outlet
blocked with a knock out cover that can he removed as required. Drainage pipe (21581) can be fitted. Maxi-
mum flow rate: 13 m3/h.
27125 1 3.543 0.028
B-B Section Plant view
Circular main drain 200 mm with flat grille

Made in white ABS. Side connection 2 and bottom connection 11/2 with knockout sockets. Bottom outlet
blocked with a knock out cover that can he removed as required. Drainage pipe (21581) can be fitted. Maxi-
mum flow rate: 13 m3/h.

27838 1 3.391 0.028
B-B Section Plant view
Drain 210 mm with ABS grille

Side connection 2. Body and grille in white ABS, with self-adhesive gaskets, flange, and screws. Maximum
flow rate: 13 m3/h.
00271 4 4.0 0.028
Optional colour
Square drain 210 mm x 210 mm with ABS grille

Side connection 2. Body and grille in white ABS, with self-adhesive gaskets, flange, and screws. Maximum
flow rate: 13 m3/h.
00273
4 5.5 0.043
97
Drain with S.S. grille

Outlet with 50 mm inside diameter and 63 mm outside diameter. Body in white ABS with Stainless Steel
grille. With self-adhesive gaskets, flange, and screws. Maximum flow rate: 7 m3/h.
00274 4 4.0 0.023
Circular drain 2" in AISI-316 S.S.

Lateral inlet 2" in AISI 316 S.S., grille fixed with screws. Includes gaskets, flange, and fixing screws. Maximum
recommended flow rate: 13 m3/h.
Side connection 2 00275 1 2.27 0.02
Side connection 2, bottom connection 11/2 26197 1 4.23 0.04
Adaptor kit for drain

For drain 00269. Includes: gaskets, flange and screws. Frame in S.S. AISI-316.
00276 40 9.7 0.01
New
NORM main drain - 515 mm x 515 mm
New range of main drains that carry out with the standard EN-13451-1/3 2012. Manufactured with poliester
resin and fiberglass. Grille in Stainless Steel or ABS. It carries out with the standard EN-13451-1/3 2012.
Optional hidrostatic valve.
Grille in S.S.
outlet connection
110 mm S.S. 42 m3/h 20076N 1 16 -
125 mm S.S. 51 m3/h 20077N 1 17 -
140 mm S.S. 66 m3/h 20078N 1 18 -
160 mm S.S. 95 m3/h 20079N 1 19 -
200 mm S.S. 103 m3/h 20291N 1 20 -
ABS Grille
outlet connection
110 mm ABS 42 m3/h 28722N 1 15 -
125 mm ABS 51 m3/h 28723N 1 16 -
140 mm ABS 66 m3/h 28724N 1 17 -
160 mm ABS 95 m3/h 28725N 1 18 -
200 mm ABS 103 m3/h 28726N 1 19 -
Minimum installation depth: 1.5 m
Max. recommended flow: 103 m3/h (0.5 m/s).
Main drain and anti-vortex

grill available in US custom- A (mm) B (mm) C (mm) D (mm)
ary units 110 330 252 400 280
125 330 252 400 280
140 515 412 585 390
160 515 412 585 390
200 515 412 585 390
98
Pool shell
equipment
Drain in polyester and fibreglass 355 mm x 355 mm

Gel-coat finish. With gaskets, flange, and screws. Slots < 8 mm. Outlet connections for glueing. With optional
hydrostatic valve.
Grille in S.S. AISI-316

outler connection
75 mm AISI-316 16 m3/h 20074 1 6.5 0.047
90 mm AISI-316 22 m3/h 20075 1 6.5 0.047
110 mm AISI-316 33 m3/h 20290 1 6.5 0.047
Recommended max. flow 33.5 m3/h (0.5 m/s)

Recommended flow 20 m3/h (0.3 m/s)

outler connection
75 mm Plastic 18 m3/h 22416 1 6.5 0.047
90 mm Plastic 27 m3/h 22417 1 6.5 0.047
110 mm Plastic 42 m3/h 22418 1 6.5 0.047
125 mm Plastic 45 m3/h 22419 1 6.5 0.047
Recommended max. flow 45 m3/h (0.5 m/s)

Recommended flow 27 m3/h (0.3 m/s)
Available in
US customary units
Drain in polyester and fibreglass 515 mm x 515 mm

Gel-coat finish. With gaskets, flange, and screws. Slots < 8 mm. Outlet connections for glueing. Recom-
mended flow 62 m3/h (0.3 m/s). Recommended max. flow 103 m3/h (0.5 m/s). With optional hydrostatic valve.
Grille in S.S. AISI-316

outler connection
110 mm AISI-316 42 m3/h 20076 1 1.4 0.132
125 mm AISI-316 51 m3/h 20077 1 1.4 0.132
140 mm AISI-316 66 m3/h 20078 1 1.4 0.132
160 mm AISI-316 95 m3/h 20079 1 1.4 0.132
200 mm AISI-316 103 m3/h 20291 1 1.4 0.132

outler connection
110 mm Plastic 42 m3/h 28722 1 1.4 0.132
125 mm Plastic 51 m3/h 28723 1 1.4 0.132
140 mm Plastic 66 m3/h 28724 1 1.4 0.132
160 mm Plastic 95 m3/h 28725 1 1.4 0.132
200 mm Plastic 103 m3/h 28726 1 1.4 0.132
99
Liner and prefabricated pool - Main drain accessories
Hydrostatic valve
To alleviate pressure which underground water can cause to the pool shell. We recommend fitting a hydrostatic
valve & drainage tube to the main drain.
The hydrostatic valve screwed to the bottom of the main drain 2" outlet. Made in white ABS with screw & spring
in S.S. Male thread 11/2.
00277 4 1.0 0.003
Drainage tube
Threaded connection 11/2 BSP for main drains 00270, 07880, 27838, 26197 and 27125. Made in ABS.
21581 24 3.54 0.021
Flush antivortex lid

New flush design to allow unobstructed operation of cleaners. Complies with EN 13451-1: 2000 Standard.
415 mm x 415 mm lid suitable with the following drains:

- 20074 - 22416
- 20075 - 22417
- 20290 - 22418
- 22419
570 mm x 570 mm lid suitable with the following drains:
- 20076 - 28722
- 20077 - 28723
- 20078 - 28724
- 20079 - 28725

415 mm x 415 mm. Height: 70 mm 25344 1 2.25 0.012
570 mm x 570 mm. Height: 60 mm 28556 1 3.90 0.015
Liner and prefabricated pool - Water level regulators
Water level regulator

Made in ABS. With lateral or bottom connection, as required. Knockout outlets. Height and level adjustable
cover. Compatible with any type of skimmer.
15862 1 2.0 0.016
100
Pool shell
equipment
Liner and prefabricated pool - ABS inlets
MULTIFLOW SYSTEM
The eyeball has been marked with a series of knock-outs sockets of 14 mm, 20 mm, and 25 mm, ena-
bling the required flow to be selected at the time of installation by using the frin-punch fitting supplied.
Recommended max flow velocity 4 m/sec, complies with EN 13451-1 Standard
14 mm = 2.2 m3/h, 20 mm = 4.5 m3/h, 25 mm = 7 m3/h
Liner return inlet Multiflow threaded

Male thread of 2, 50 mm solvent interior. For liner pools, white ABS plastic with gaskets and screws. Instal-
lation with wall conduits 15662 or 15663 is recommended.
00330 12 4.5 0.020
Liner return inlet Multiflow threaded, Parker model

Male thread of 2, 50 mm inside diameter. For liner pools, white ABS plastic with gaskets and self-tapping
screws. Installtion with wall conduits 15664 or 15665 is recommended.
06498 20 4.72 0.021

Optional colour
Panel return Multiflow inlet threaded, for prefabricated pools

2 male thread and inside solvent weld 50 mm. Made in white ABS.
00334 24 4.61 0.020
Threaded return inlet Multiflow for prefabricated pools

2 male thread, and 11/2 female thread. In white ABS, with gaskets. Holes in grilles are not bigger than 8 mm,
according to EN 13451-1.
Standard inlet 06481 30 5.1 0.021
101
Return inlet Multiflow for panelled pools

New inlets especially designed to be installed in panelled pools between 10 and 15 cm thick. To glue to
50 mm pipe. Made in white ABS, with gaskets.
33091 8 3.35 0.021
New
NORM return inlet
New range of inlets complying with standards
DIMENSIONES
Rev. EN00 13451-1 and EN 13451-3, suitable for public and private
Ao / Year: 2012
pools. In white ABS with UV treatment. Pg./Page
DIMENSIONS ESP / ENG
1/1
CODIGO / CODE: 56498 Code Standard Standard Standard

DESCRIPCION: BOQUILLA NORMA 115,5X57 PISC.H. ROSC.-ENC.
DESCRIPTION: NORMATIVE RETURN INLET THREADED CONCRETE P.
Nozzle for prefabricated pool / liner 56499 12 4.5 0.020
Nozzle for prefabricated pool 56500 24 4.5 0.020
A
50
8,
11
31
7,6
50,30
2" BSP
A SECCIN A-A
Return inlet for prefabricated pools with liner

These inlets have a smaller exterior diameter than previous models in order to achieve superior adaptation in
57,1
pools with curved walls.

Return inlet 11/2" BSP thread 32450 24 7.1 0.021
9,4
Return inlet 50 mm solvent weld 32451 24 6.9 0.021
Note: Units in mm Caudal Max. 3,2m3/h
Adjustable return inlet

With gaskets, flanges and screws. 3 adjustable positions: (100%, 65%, 35%). Flow rate: 13.5 m3/h. Outer
connection 63 mm.
15864 12 4.2 0.02
Floor return inlet for prefabricated pool

For water return. With gaskets, flanges and screws. Adjustable flow. Max. flow rate: 12 m3/h.
2 male thread and inside 50 mm 00340 12 5.4 0.020

2 outer thread with NPT outlets 11584 12 5.4 0.020
Outside 63 mm PN 6, inside 50 mm 20139 12 5.4 0.021
102
Pool shell
equipment
Floor inlet BCN03

Adjustable liner floor inlet. For glueing into PN6 and PN10 pipe. In white ABS, with self tapping screws or with
metal inserts. With flange in plastic or S.S., depending on the model. Maximum flow rate 9.5 m3/h.
Plastic flange with self-tappers PN6 28230 12 3.25 0.031

Plastic flange with metal inserts PN6 28231 12 3.55 0.031
S.S. flange with self-tappers PN10 28501 12 4.24 0.031
S.S. flange with metal inserts PN10 28502 12 4.54 0.031
Adjustable BCN 03 nozzle for liner pools

Adjustable floor inlet nozzle for swimming pools with liner. The parts affected by the glue are made of PVC,
the flange and the face ring of ABS and the internal components of ABS and POM. The nozzle is installed
after concreting bottom and after cutting the wall conduit. The nozzle can be adjusted up to 4, to align them
completely with the background. The nozzle ball and the wall conduit simplifies a lot the installation task. It is
recommended to install the nozzle in the wall conduit (43590).
Metal inserts, ABS flange 43586 12 2.04 0.033
Self-tappers, ABS flange 43587 12 2.04 0.033
Metal inserts, Inox flange 43588 12 2.04 0.033
Self-tappers, Inox flange 43589 12 2.04 0.033
Wall conduit 90 mm
PVC plastic wall conduit. Cutting area of 120 mm to adjust it to the wall or to the background of the pool.
63 or 75 connection as preferences
Wall conduit 90 / 63-75 mm 43590 9 7.3 0.033
For nozzles:
Net'N'Clean: 43584 - 43585
BCN 03: 43586 - 43587 - 43588 - 43589
Inlet/suction nozzle for large flows: 41518 - 41519 - 41520 - 41521
3 adjustable floor inlet

Made in white ABS. With gaskets, flanges and screws. Adjustable flow by rotating the grille. Suction area:
0.015 m2. Flow rate at 0.4 m/s: 20 m3/h. Max. recommended flow rate: 26 m3/h (0.5 m/s).
Grille in S.S. AISI-304 08316 2 2.65 0.047

Grille in white ABS 11795 2 2.65 0.047
Suction nozzle for liner pool

2 male thread, 50 mm inside diameter. Made in white ABS, with cap, gaskets and screws. Recommended
to be installed with wall conduit 15663.
Standard inlets 00332 12 4.22 0.020

Outlets in US customary units 11585 12 4.22 0.020
103
Suction nozzle for panelled pools

Especially designed to be installed in panelled pools between 10 and 15 cm thick. With gaskets. Connections:
Inside 50 mm pipe and 11/2" BSP male thread.
33092 8 3.35 0.021
Suction inlet for liner pools

Made in white ABS. With gaskets, flanges and screws. Connections: 2 male thread, 50 mm inside diameter.
17382 20 6.0 0.020
Suction inlet for prefabricated pool

2 male thread, 50 mm inside diameter. Made in white ABS, with cap thread 11/2.
00336 24 4.13 0.020
Double joint kit

Kits comprising a double joint and the screws necessary for the installation of nozzles in steel panel pools.
Made of TPE, the kit enables the installation of various accessories in pool basins and protects the panelling
from coming into contact with water. Easy to install. Prevents corrosion of the panelling in the moulded area.
For inlets, inserts 43455-0500 80 - 0.035
Inlet/suction nozzle for large flows

Inlet nozzles for large flows and they can be used as suction nozzle also. Inlet flow rate 30m3/h for a maximum
water flow velocity of 4m/s according to EN 13451-1 standard. Suction flow rate 5m3/h for a maximum water
flow velocity of 0.5 m/s according to EN 13451-1 standard. PVC body. 75 or 90 pipe connection. The nozzle
can be installed in the wall conduit 43590. 3 models available for Concrete poolss, profabricated pools and
panel pools. Grilles can be oriented in any direction.
For panel pools 41518 10 5.50 0.021
For prefabricated pools 41521 12 4.20 0.021
Suction inlet for prefabricated pool

2 male thread, 11/2 female thread. Made in white ABS.
Standard inlet 06484 30 4.3 0.021

NPT outlets 11582 30 4.3 0.021
104
Pool shell
equipment
Hydromassage kit
Made of a return inlet and wall conduit fitted with an air inlet and a venturi. Two wall conduit lengths available.
50 mm water connection pipe and 20 mm air suction pipe.
Hydromassage kit for fibreglass pools:

Hydromassage kit for prefabricated
pools with liner:
Liner and prefabricated pool - S.S. inlets
Return inlet for liner pool

11/2 male thread. Made of S.S. AISI-316. 20 mm eyeball. With gaskets and screws. Recommended flow
rate: 4.5 m3/h.
16327 1 0.5 0.001
Pool wall conduit adapter

11/2 male thread. Made in S.S. AISI-316. To convert a Concrete pools conduit into a prefabricated one. To be
used with S.S. inlet 16331.
26171 1 0.2 0.001
Return inlet for liner pool

Made in S.S. AISI-316. Can be used with wall conduits 00344, 00345 and panel adapter 26171. Supplied
with gaskets and screws. 20 mm eyeball blocked with screws. Recommended flow rate: 4.5 m3/h.
16331 1 0.3 0.001
Adjustable pool floor return inlet

2 male thread. Made in S.S. AISI-316. Can be installed both in concrete as well as prefabricated pools.
Water flow may be adjusted with the central screw. Max. recommended flow rate: 14 m3/h, complies with EN
13451-3 Standard.
15839 1 0.9 0.002
Suction nozzle for liner pool

Made in S.S. AISI-316, with gaskets, flange and screws. With 11/2 BSP male thread.
16330 1 0.5 0.001
105
Liner and prefabricated pool - Wall conduits
New range of 300 mm long conduits for 2 inlets and "Multiflow" that can be easily cut to different
lengths depending on pool wall thickness. Made in ABS. The flange rib has 2 holes for positioning inside
the pool shell. The front face of the conduit is recessed which means the inlet body is installed flush with
the wall leaving the liner flat and only the inlet face plate visible.
Rear 2 male thread and 50 mm inside solvent socket

2 front female thread return
for 2 male thread 15663 12 4.0 0.040

exclusively for inlet 06498 15664 14 4.2 0.040
Rear outside 63 mm and inside 50 mm to glue

2 front female thread return
for 2" male threading 15662 12 5.0 0.040
exclusively for inlet 06498 15665 14 5.4 0.040
Models
Dimensions
15663 15664 15662 15665
A 250 250 250 250
B 175 175 175 175
C 118.5 84 118.5 84
D 2 2 2 2
E 10 24 10 24
F 300 300 300 300
G 50 50 50 50
H 2 2 63 63
PVC wall conduits

PVC grey colour.
150 mm length:
2 male thread + inside 50 mm.
2" female thread 00322 12 3.0 0.011
300 mm length:
Connection 2 female and male thread 00323 6 3.0 0.011
2" male thread rear connection and inside

connection for 33684 "MINI" light 00324 6 3.0 0.011
2 male thread + inside 50 mm +

female thread 1" 00325 6 3.0 0.011
2 male thread + inside 50 mm.

Inside 50 mm special 00326 6 3.0 0.011
for 00289, 07957, 00304, 00305 and
00306 inlets.
106
Pool shell
equipment
Liner and prefabricated pool - Wall conduits
Stainless Steel wall conduits

Made in S.S. AISI-304. Both ends with 11/2 female threads. Earth connection. For inlet 16331.
Length 240 mm 00344 1 0.7 0.003

Length 340 mm 00345 1 0.9 0.005
Models
Dimensions
00344 00345
A 240 340
B 11/2 11/2
C 85 85
D 11/2 11/2
E 35 35
F 38 38
Packs of pool shell materials
New
Packs of pool shell materials
Packs contain:
2 skimmers/3 multi-flow return inlets/1 suction inlet/1 round main drain.
Pack for concrete pools 56301 1 - -

Pack for liner pools 58930 1 - -
Pack for concrete pools
Contains the following products:
00249 01467 24413 24415

2x 1x 3x 1x
Pack for liner pools
Contains the following products:
01464 27838 00330 00332

2x 1x 3x 1x
107
Skimfilters
Internal skimfilter for panel pools

160 mm. Motor 12 V (50 Hz). Transformer 230-12V-50 Hz. GS certified. Includes cartridge and a plastic
hook for metallic panel pools. Spare cartridge: 09037R0200/1.
Skimfilter, flow rate 4 m3/h 30899 1 5.12 0.025
Skimfilter pack
Flow rate 3.8 m3/h. Mini-skimmer mouth, 2 inlet connection. Motor 12 V (50 Hz). Transformer 230-12V
50Hz. CE-GS certified. Includes cartridge. For fixing to pool outer wall. Spare cartridge: 09037R0200/1.
30889 1 6.45 0.038
Floating skimmer
160 mm. Maximum flow rate 5 m3/h. Outer connections 32 mm and 38 mm. With narrow plastic hook
designed for panel pools.
16573 1 1.3 0.024
Mini-skimmer with inlet

Skimmer connections 32 mm and 38 mm.
20889 1 2.2 0.019
Mini-skimmer with wide mouth with inlet for panel pools

Skimmer connections 32 mm and 38 mm.
33350 1 3.5 0.03
108
Pool shell
equipment
Installation diagrams
Skimmer installation Installation of water level regulator Main drain installation
Drain
Connection Connection
40 or 32 20
Connection 50
Connection
50 or 63
Pump Minimum 300 mm
Connection 50
Pump
63 to 50 50 pipework
filting
Connection to drain or
Main drain skimmer
Nozzle installation Underwater installation lights NetnClean valve installation
Minimum 2500 mm
Aprox. 700 mm
Aprox. 300 mm
Pump
Conduit hose
Pump
Connection
50 pipework
109
Installation diagrams
Concrete pools:
Concrete + liner Concrete
FIBERGLASS POOLS:
PANEL POOLS:
1 gasket 2 gaskets
110
FILTRAtioN
FILTR AtioN
FILTRATION
112 Diatomaceous earth filters
113 Cartridge filters
115 Hydrocyclonic pre-filter
116 Injection moulded sand filters
117 Blow-moulded sand filters
119 Laminated filters
125 AstralPool Signature laminated filters
131 Compact housings without inner assembly
131 Compact housings with inner assembly
133 Multiport valves
140 Pressure gauge panels
142 Filtration media & accessories
111
FILTRAtioN
Diatomaceous earth filters
Diatomaceous earth Clarity filters

Made in polyester and fibreglass. Supplied with pressure gauge, air vent and side mounted multiport valve.
Filtration velocity 4.9 m3/h/m2.
Packaging Weight Kg Volume m3
11000 l/h 600 mm Outlet 11/2 Model DE-24 11619 1 34.0 0.410
16400 l/h 600 mm Outlet 11/2 Model DE-36 11620 1 39.0 0.460
21800 l/h 600 mm Outlet 2 Model DE-48 11621 1 44.0 0.550
27300 l/h 600 mm Outlet 2 Model DE-60 11622 1 48.0 0.610
Air relief valve

Pressure gauge
Filtration fabric Circular clam
Multiport valve
2 drainage 11/2 - 2
Code H D M C N A Code 11619 11620 11621 11622

11619 930 610 420 675 190 1230 Filtration area m 2
2.2 3.3 4.5 5.6
11620 1080 610 420 675 190 1380 Diatomaceous earth weight kg 1.4 2.3 3.2 4.1
11621 1230 610 420 825 190 1530 Maxi. working pressure kg /cm2 2.5 2.5 2.5 2.5
11622 1400 610 420 825 190 1900
Dimensions in mm.
Multiport valve for Clarity filter

This valve is valid only for the diatomaceous earth filter Clarity.
For D.E. filter 11/2

with filter connections (config. 2) 15385 6 15.5 0.079
For D.E. filter 2

with filter connections (config. 2) 15389 6 22.7 0.158
Consult valve variations on page 175
Diatomaceous earth collector

To collect waste diatomaceous earth from filter. Made of PP & PVC.
20127
1 9.5 0.112
400
690
60
322
112
FILTRAtioN
DIATOMACEOUS EARTH FILTERS
Diatomaceous earth Celatom FW-60
FILTRATION
Approx. 20 Kg bags.
03247 1 20 0.60
Diatomaceous earth Celite 545

Marine fossils with diverse shapes that help retention of suspended particles. This feature increases its perfor-
mance. Approx. 20 kg bags.
03246 1 23 0.60
Cel monoblocs with diatomaceous earth filters

Consists of one Cel model diatomaceous earth filter, Astramax pump and a polypropylene base. To see the
amount of diatomaceous earth, needed please see Cel series filter.
Cel 30. Flow rate 6.8 m3/h 18557 1 - -

Cel 40. Flow rate 9 m3/h 18558 1 - -
Cel 50. Flow rate 11.4 m3/h 18559 1 - -
Cel 70. Flow rate 15.9 m3/h 18560 1 - -
Cartridge
For Cel 30 filter 19789 1 2.5 0.016
For Cel 40 filter 19790 1 3.4 0.024
For Cel 50 filter 19791 1 4.2 0.031
For Cel 70 filter 19792 1 4.9 0.039
Cartridge filters
Cartridge filters, Terra series

Made of PP and fibreglass. Fitted with pressure gauge and manual air vent. High filtration capacity. Easy main-
tenance. 11/2 outlet. Filtration velocity 1.8 m3/h x m2 of filtration cloth. Maximum working pressure:
2.5 Kg/cm2.
Terra 50. Recommended flow. 8.4 m3/h
Filtration surface: 4.7 m2 18218 1 7.5 0.086
Filtration surface: 7 m2 18219 1 8.8 0.100
Filtration surface: 9.3 m2 18112 1 9.7 0.120
Terra 150. Recommended flow. 25 m3/h
Filtration surface: 14 m2 18220 1 11.2 0.130
400
Code A
18218 450
18219 570
18112 690
18220 810
113
FILTRAtioN
Cartridge filters
Viron cartridge filter

High capacity filter, 4 x 9.3 m2 or 4 x 14 m2, with long intervals between each cleaning operation, a 50 mm
inlet and outlet, and oil gage, all of which is ideal for rural and other environments where the use of water is
restricted. A 5-year guarantee on the tank.
Viron CL 400 43429 1 48 0.252
Viron CL 600 43430 1 50 0.355
Filtration Max. Flow Dimension Dimension

Model Weight
area l/min A B
Viron CL 400 38 800 48 734 586
Viron CL 600 57 800 50 1034 586
ZX Cartridge Filtres
High quality cartridge element for long life filtration, suitable for spa temperatures. Complete with quality pres-
sure gauge and 63 mm water connections.
Recommended flow Filtration surface

ZX 50 13.5 m3/h 4.7 m2 41331 1 7.00 0.075
ZX 75 17.45 m3/h 7 m2 41332 1 8.00 0.075
ZX 100 22.5 m3/h 9.4 m2 41333 1 15.50 0.101
ZX 150 26.7 m3/h 14.0 m2 41334 1 16.50 0.101
ZX 200 29.4 m3/h 19.0 m2 41335 1 24.00 0.127
ZX 250 30.9 m3/h 24.0 m2 41336 1 25.00 0.127
Model A dim (mm)

ZX 50 465
A
ZX 75 465
ZX 100 700
ZX 150 700
ZX 200 1160
50 ZX 250 1160
345
Terra monobloc with cartridge filter

Made of PP and fibreglass. Filted with a pressure geuge and an air relief value. High filtration capacity and easy
maintenance. 2" outlet (supplied with a reduction to 1"). Filtration velocity of 1.8 m/h x m. Maximum work-
ing pressure: 2.5 kg/cm.
Terra 50. Flow rate 8.4 m3/h 18549 1 18.3 0.22
Terra 150. Flow rate 25 m3/h 18552 1 - -
Cartridge
For Terra 50 filter 19785 1 1.7 0.016
For Terra 75 filter 19786 1 2.0 0.024
For Terra 100 filter 19787 1 2.5 0.031
For Terra 150 filter 19788 1 3.1 0.03
114
FILTRAtioN
Hydrocyclonic pre-filter
Hydrospin & Hydrospin Compact
FILTRATION
Hydrocyclone pre-filters can be fitted to filtration systems in both new and old installations. Hydrospin is able
to treat flows up to 30 m2/h with a maximum working pressure of 2.5 bars. It is fitted between the pump and
the filter and separates out solids of up to 40 micron, thus reducing by half the amount of water consumed for
cleaning the filtration system. HydroSpin has a device for collecting solids with three separate areas (settling,
clarifying and clouding). It can be cleaned using just five litres of water without having to stop the pump.
Hydrospin 45289 1 7.8 0.088

Hydrospin Compact 53743 1 4.0 0.033
Kit for wall installation 47158 4 4.2 0.117
45289 53743
Working pressure (bar) 2.5 2.5 Hydrospin Compact
HEAD LOSS
50 Hydrospin
Connections 63 0.6
thread 21/4
Purge connection 1" 3/4 0.5
Min. flow rate (m3/h) 5 3
0.4
Max. flow rate (m3/h) 30 16.5
0.3
Water for cleaning (l) 5 15
Separate solids (micron) 40 60 0.2
Floor support Included 0.1

Accessory
Wall support Included
47158 0
0 5 10 15 20 25 30
Q (m3/h)
10 6
FILTER
9
Hydrospin Compact 5
8
Hydrospin
7
Frequency (%)
4
Frequency (%)
5 3
4
3
2
2
1
1
0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300 350 400
Particle diameter (m) Particle diameter (m)
115
FILTRAtioN
Available in Injection moulded sand filters

US customary units
Ivory colour. Injected thermo-plastic shell with built in base. Top and bottom parts are thermically welded.
Supplied with pressure gauge, manual air vent, water purge, and multiport valve. Maximum filtration veloc-
ity: 50 m3/h/m2. Maximum working pressure: 2.5 Kg/cm2.
Top mounted Cantabric filter

Top mounted multiport valve. Threaded filter locking ring in ABS.
6000 l/h 400 mm outlet 11/2 22399 1 10.7 0.23

9000 l/h 500 mm outlet 11/2 15780 1 17.5 0.37
14000 l/h 600 mm outlet 11/2 15781 1 19.9 0.49
21000 l/h 750 mm outlet 11/2 20128 1 30.4 0.83
21000 l/h 750 mm outlet 2 23866 1 32.1 0.83
Side mounted Cantabric filter

Clear lid & threaded locking ring in ABS, supplied with side mounted multiport valve.
With multiport side valve

6.000 l/h 400 mm outlet 11/2 22398 1 9.0 0.15
9.000 l/h 500 mm outlet 11/2 15782 1 15.8 0.29
14.000 l/h 600 mm outlet 11/2 15783 1 17.8 0.40
21.000 l/h 750 mm outlet 2 15784 1 29.0 0.67
30.000 l/h 900 mm outlet 21/2 22402 1 49.0 1.30
POSSIBILITY WITHOUT MULTIPORT VALVE
Top mounted Side mounted

22399 15780 15781 20128 23866 22398 15782 15783 15784 22402
D (mm) 400 500 600 750 750 400 500 600 750 900
H (mm) 894 1009 1069 1239 1250 715 800 875 1045 1215
M (mm) 744 829 894 1064 1098 380 415 445 575 675
N (mm) 680 765 830 1000 1023 255 290 320 345 405
Connections 11/2 11/2 11/2 11/2 2 11/2 11/2 11/2 2 21/2
Flow rate m3/h 6 9 14 21 21 6 9 14 21 30
Approx. pool volume (m)
48 72 112 168 168 48 72 112 168 240
(8 hours)*
Sand, kg 60 100 150 300 300 60 100 150 300 550
Net weight, kg 8 14 15 23 25 7 12 14 24 34
Package volume m3 0.2 0.37 0.49 0.83 0.83 0.15 0.29 0.4 0.67 1.3
Fitted with sand dump port of 2 in 750 mm & 900 mm models, and of 11/2
in 400, 500 & 600 mm models
* 8 hours turnover rate
116
FILTRAtioN
Blow-moulded sand filters
FILTRATION
One piece blow-moulded filters made of plastic. With threaded lid, multiport valve, pressure gauge, manual
air vent and water purge. Ivory colour. Maximum working pressure: 2.5 Kg/cm2 for filters 380 mm, 430
mm & 480 mm, & 2 Kg/cm2 for filter 560 mm & 660 mm.
Millennium filters with Top mounted valve

Maximum filtration velocity: 50 m3/h/m2.
380 mm - 5500 l/h outlet 11/2 27811 1 13.0 0.17

430 mm - 7000 l/h outlet 11/2 22407 1 14.0 0.17
480 mm - 9000 l/h outlet 11/2 22408 1 16.0 0.24
560 mm - 12000 l/h outlet 11/2 22409 1 17.0 0.35
660 mm - 17000 l/h outlet 11/2 28253 1 24.5 0.52
Available in
US customary units
Millennium filters with side mounted valve

Maximum filtration velocity: 50 m3/h/m2.
380 mm - 5500 l/h outlet 11/2 27809 1 10.5 0.13

430 mm - 7000 l/h outlet 11/2 25296 1 13.0 0.13
480 mm - 9000 l/h outlet 11/2 25297 1 16.0 0.18
560 mm - 12000 l/h outlet 11/2 25298 1 18.0 0.26
660 mm - 17000 l/h outlet 11/2 28252 1 29.0 0.42
Millennium model monobloc with top mount MPV

Threaded locking ring, top mount.
380 mm - Sena 1
/3 HP 230 V II 27805 1 27.0 0.33
430 mm - Sena 1
/3 HP 230 V II 23342 1 27.0 0.33
480 mm - Sena 1
/2 HP 230 V II 23343 1 31.0 0.43
560 mm - Sena 3
/4 HP 230 V II 23344 1 35.0 0.50
660 mm - Sena 1.25 HP 28299 1 41.0 0.59
Millennium model monobloc with side mount MPV

Threaded cover, side mount.
380 mm - Sena 1
/3 HP 230 V II 27804 1 28.0 0.33
430 mm - Sena 1
/3 HP 230 V II 23348 1 28.0 0.33
480 mm - Sena 1
/2 HP 230 V II 23349 1 31.0 0.43
560 mm - Sena 3
/4 HP 230 V II 23350 1 35.0 0.50
660 mm - Sena 1.25 HP 28301 1 41.0 0.59
117
FILTRAtioN
Blow-moulded sand filters
Millennium filters
Top mounted Side mounted Top mounted monobloc Side mounted monobloc
A - Top mounted B - Side mounted C - Top mounted monobloc D - Side mounted monobloc
27811 22407 22408 22409 28253 27809 25296 25297 25298 28252 27805 23342 23343 23344 28299 27804 23348 23349 23350 28301
D (mm) 380 430 480 560 660 380 430 480 560 660 380 430 480 560 660 380 430 480 560 660
H (mm) 895 875 920 995 1160 675 715 742 830 960 905 955 975 1055 1125 685 735 745 830 962
M (mm) 725 735 780 855 920 385 395 420 460 570 735 815 835 915 990 390 415 410 460 570
N (mm) 660 655 700 775 850 260 270 295 335 510 670 735 755 815 925 265 290 285 335 510
Length L (mm) - - - - - - - - - - 710 715 835 835 835 710 715 835 835 835
Connections 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 11/2
Flow rate m3/h 5.5 7 9 12 17 5.5 7 9 12 17 5.5 7 9 12 17 5.5 7 9 12 17
Approx. pool volume m3 up to 40 40-50 50-75 75-100 140 up to 40 40-50 50-75 75-100 140 up to 40 40-50 50-75 75-100 140 up to 40 40-50 50-75 75-100 140
Sand, kg 40 60 85 135 250 40 60 85 135 250 40 60 85 135 250 40 60 85 135 250
Maxi working pressure kg/cm2 2.5 2.5 2.5 2 2 2.5 2.5 2.5 2 2 2.5 2.5 2.5 2 2 2.5 2.5 2.5 2 2
Net weight kg 13 14 16 17 24.5 10.5 13 16 18 29 27 27 31 35 41 28 28 31 35 41
Package volume m3 0.17 0.17 0.24 0.35 0.52 0.13 0.13 0.18 0.26 0.42 0.33 0.33 0.43 0.50 0.59 0.33 0.33 0.43 0.50 0.59
Millennium / Sena
Side monobloc 27804 23348 23349 23350 28301
Top monobloc 27805 23342 23343 23344 28299
(mm) 380 430 480 560 660
Pump Sena Sena Sena Sena Sena
Power (HP) 1/3 1/3 1/2 3/4 1.25
Voltage (V) 230 II 230 II 230 II 230 II 230 II
Frequency (Hz) 50 50 50 50 50
118
FILTRAtioN
Laminated filters
Aster filters
FILTRATION
Laminated fibreglass filter with fibreglass. Grey colour, with new boltless lid and polypropylene base. Fitted
with pressure gauge, water drainage plug, and multiport valve. Maximum working pressure: 2.5 kg/cm2. Maxi-
mum filtration velocity 50 m3/h/m2.
With top mounted multiport valve

5000 l/h 350 mm outlet 11/2 30768 1 17 0.16
8000 l/h 450 mm outlet 11/2 30769 1 20 0.27
9000 l/h 500 mm outlet 11/2 30770 1 22 0.30
14000 l/h 600 mm outlet 11/2 30771 1 27 0.46
15000 l/h 650 mm outlet 11/2 30772 1 33 0.52
21000 l/h 750 mm outlet 2 33847 1 38 0.74
32000 l/h 900 mm outlet 2 33848 1 72 1.49
With side mounted multiport valve

5000 l/h 350 mm outlet 11/2 00497 1 12.5 0.110
8000 l/h 450 mm outlet 11/2 00498 1 15.5 0.160
9000 l/h 500 mm outlet 11/2 19781 1 18.0 0.265
12000 l/h 550 mm outlet 11/2 32706 1 20.0 0.265
14000 l/h 600 mm outlet 11/2 00499 1 21.0 0.320
15000 l/h 650 mm outlet 11/2 21071 1 32.0 0.472
21000 l/h 750 mm outlet 2 00500 1 31.0 0.570
32000 l/h 900 mm outlet 2" 08133 1 - -
Without multiport valve

31000 l/h 900 mm outlet 21/2 00501 1 65.0 1.250
With Top mounted multiport valve With side mounted multiport valve Without
valve
30768 30769 30770 30771 30772 33847 33848 00497 00498 19781 32706 00499 21071 28479 00500 00501
D mm 350 450 500 600 650 750 900 350 450 500 550 600 650 680 750 900
H mm 910 965 960 1005 1060 1184 1344 780 795 770 825 850 880 915 945 1050
M mm 740 795 790 835 890 973 1133 420 430 415 455 455 480 525 555 660
N mm 680 785 730 775 830 897 1057 295 305 290 330 330 355 400 325 390
Connections 11/2 11/2 11/2 11/2 11/2 2 2 11/2 11/2 11/2 11/2 11/2 11/2 11/2 2 21/2
Flow rate m3/h at 50m3/h/m2 5 8 9 14 15 21 31 5 8 9 12 14 15 18 21 30
Pool (volume) m3 (8 hours) 40 64 72 112 120 168 240 40 64 72 96 112 120 144 168 240
Sand kg 50 70 90 110 200 290 500 50 70 90 110 125 200 290 210 500
Maxi working pressure kg/cm2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Net weight kg 17 20 22 27 33 38 72 12.5 15.5 18 20 21 24 26 30 51
Packaging volume m3 0.16 0.27 0.30 0.46 0.52 0.74 1.49 0.13 0.18 0.26 0.36 0.36 0.44 0.69 0.6 1.03
119
FILTRAtioN
Laminated filters
Aster filter - high quality of filtration

The filters are manufactured with polyester resin and fibreglass.
The highness filtering layer is of 0.8 m, That gives a mayor quality of filtration than the residential filter this
increases the capacity withholding the litle particles.
Prolongs the time saturation filtration of the layers saving energy consumption, water consumption and
chemical products.
The filter can be used as a single layer or multi layer combine sand with gravel, glass or antracite.
Fast opening lid.
Sand drain of 2 1/2" in the bottom part of the filter.
Optional sand drain D. 200 mm.
Maximum pressure 2.5 Bar
Optional interior finishing with vinylester for ozone treatment.
Maximum temperature of 40.

500 mm output 11/2" 24768-0100 1 - -

600 mm output 11/2" 24769-0100 1 - -
750 mm output 2" 24770-0100 1 - -
900 mm output 2" 10003-0100 1 - -
900 output 21/2" 10004 1 - -
24768-0100 24769-0100 24770-0100 10003-0100 10004

D mm 500 600 750 900 900
H mm 1365 1370 1435 1400 1435
M mm 605 605 665 825 865
N mm 480 480 435 595 595
Connections 11/2 11/2 2 2 21/2
Flot rate m3/h at 50 m3/h/m2 9.5 16.5 21 31
Pool volume m3 75 120 175 250
Gravel kg 16 35 65 135
Sand kg 200 300 450 580
Working pressure kg/cm2 2.5 2.5 2.5 2.5 2.5
Net weight kg 30 40 60 90
Package volume m3 0.59 0.59 0.89 - -
120
FILTRAtioN
Filtration bed 1 m Laminated filters
Artic filter
FILTRATION
New range of high filtration sand filters with diameters 500, 650, 800, 950, 1050, 1200 mm. Filter of sand
of great quality with a high efficiency of cleaning manufactured in polyester with external finish in gel-coat, by
spraying . Body with only two parts. Sand high 1 m. Maximun working pressure of 2.5 Kg/cm. Maximun work-
ing temperature 50C. Internal components made of plastic PVC. Excellent external finishing with gel-coat.
Internal coating with white gel-coat. Filter color Ivory. Filled union between the top and bottom filter part with
silicone for a optim finished. Optional sight-glass. Manual water drain 1" in 500, 650, 800, 950 and 21/2" in
1050 and 1200 and 21/2" in 1050 and 1200. Manual air drain. Lid in injected plastic of 200 mm in 500,
650, 800, 950, and of 400 in 1050 and 1200. Sand discharge lid 200mm in the bottom of the filter. (op-
tional 400 in 1050 and 1200). 650, 800, 950, 1050 and 1200 available in colector arms or nozle plate.

In colector arms
500 mm connection 11/2 34029-0100 1 70.0 -
650 mm connection 11/2 34030-0100 1 85.0 -
800 mm connection 2 34031-0100 1 115.0 -
950 mm connection 21/2 41187 1 140.0 -
1050 mm connection 3 41188 1 180.0 -
1200 mm connection 4 41189 1 210.0 -
34029 34030 34031 41187 41188 41189

D mm 500 650 800 950 1050 1200
H mm 1650 1700 1750 1760 1895 1970
M mm 125 125 230 270 270 270
N mm 780 775 685 655 630 665
L mm 1000
C mm 300
Nozzle plate detail P mm 400 490 625 705 775 940
T mm 200 400
Connections 11/2 11/2 2 21/2 3" 4"
Flow m /h
3 9.5 16.5 25 35 43 56.5
Filtering surface m2 0.19 0.33 0.50 0.70 0.86 1.13
Sand kg 225 380 530 830 1015 1360
Gravel kg 50 100 165 260 320 410
Working pressure kg/cm2 2.5 2.5 2.5 2.5 2.5 2.5
Net weight kg 70 85 115 140 180 210
Collector arms detail
Optional sight glass
Discharge 1"
Discharge 21/2"
121
FILTRAtioN
Filtration bed 1.2 m Laminated filters
Artic Plus filter

New range of high filtration sand filters with diameters 650, 800, 950, 1050, 1200 mm. This filters are
manufactured by spraying on layers of polyester resin and fiber glass strands. Body with only two parts. Sand
high 1.2 m. Maximun working pressure of 2.5 Kg/cm. Maximun working temperature 50C. Internal compo-
nents made of plastic PVC. Excellent external finishing with gel-coat. Internal coating with white gel-coat.
Filter color Ivory. Filled union between the top and bottom filter part with silicone for a optim finished. Op-
tional sight-glass. Manual water drain 1" in 650, 800, 950 and 2 1/2" in 1050 and 1200. Manual air drain.
Lid in injected plastic of 200 mm in 650, 800, 950, and of 400 in 1050 and 1200. Sand discharge lid
200 mm in the bottom of the filter (optional 400 in 1050 and 1200). 650, 800, 950, 1050 and 1200
available in colector arms or nozle plate.
In colector arms:
650 mm connection 11/2 36053-100 1 105.0 -
800 mm connection 2 36054-100 1 135.0 -
950 mm connection 21/2 41373 1 160.0 -
1050 mm connection 3 36055 1 200.0 -
1200 mm connection 4 36056 1 230.0 -
36053 36054 41373 36055 36056

D mm 680 825 970 1090 1255
H mm 1900 1950 1960 2145 2170
M mm 125 230 270 270 270
N mm 730 670 665 665 665
L mm 1200
Nozzle plate detail C mm 300

P mm 490 625 705 775 940
T mm 200 400
Connections 11/2 2 21/2 3 4
Flow m3/h 16.5 25 35 43 56.5
Filtering surface m2 0.33 0.50 0.70 0.86 1.13
Sand kg 470 660 1015 1240 1665
Gravel kg 100 165 260 320 410
Working pressure kg/cm2 2.5
Collector arms detail Net weight kg 105 135 160 200 230
Optional sight glass
Discharge 1"
Discharge 21/2"
122
FILTRAtioN
Filtration bed 0.6 m Laminated filters
High performance filter Rapidpool
FILTRATION
Laminated polyester filter with fibreglass. Red colour, polypropylene base, boltless lid. Port for emptying sand
and water, filted with pressure gauge and air relief valve. Side mount multiport valve. Maximum filtration veloc-
ity 50 m3/h/m2. Maximum working pressure 2.5 kg/cm2. Filtration bed 0.6 m.
Top mounted valve version

6000 l/h 400 mm outlet 11/2 32427 1 19.0 0.200
9000 l/h 500 mm outlet 11/2 32428 1 25.0 0.355
15000 l/h 650 mm outlet 11/2 32429 1 34.0 0.600
24000 l/h 800 mm outlet 2 33849 1 44.0 1.050
Side mounted valve version
6000 l/h 400 mm outlet 11/2 00488 1 15.0 0.150
9000 l/h 500 mm outlet 11/2 00489 1 22.0 0.280
15000 l/h 650 mm outlet 11/2 00490 1 30.0 0.500
24000 l/h 800 mm outlet 2 00491 1 45.0 0.880
D
H
H
M
N
L
M
N
Top mounted valve Side mounted valve

32427 32428 32429 33849 00488 00489 00490 00491
Filter mm 400 500 650 800 400 500 650 800
H mm 1020 1165 1285 1566 860 1032 1126 1272
M mm 850 995 1115 1355 442 527 552 592
N mm 790 935 1055 1279 317 402 427 362
Connections 11/2 11/2 11/2 2 11/2 11/2 11/2 2"
Flow rate m3/h at 50m3/h/m2 6 9 15 24 6 9 15 24
Pool (volume) m3 (8 hours) 48 72 120 120 48 72 120 192
Sand kg 60 130 255 445 60 130 255 445
Sand height mm 545 571 650 785 545 571 650 785
Maxi working pressure kg/cm2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Net weight kg 19 25 34 44 15 22 30 45
Packaging Volume m3 0.20 0.355 0.60 1.05 0.16 0.3 0.53 0.9
123
FILTRAtioN
LAMINATED FILTERS
Vesubio filters
The Vesubio range covers both public and residential pools. Filters manufactured with simultaneous projection
of resin and fibreglass. Lid fastened with high resistance bolts. Top opening of 210 mm. 1050 mm and
1200 mm models are also available with top opening of 400 mm. Maximum working pressure of 2.5 kg/cm2.
Side mount version
8000 l/h 450 mm outlet 50 mm 15785 1 16 0.200
9000 l/h 500 mm outlet 50 mm 19353 1 20 0.260
14000 l/h 600 mm outlet 50 mm 15786 1 23 0.357
22000 l/h 750 mm outlet 63 mm 15787 1 32 0.595
32000 l/h 900 mm outlet 75 mm 15788 1 48 1.003
43000 l/h 1050* mm outlet 75 mm 15789 1 97 2.052
43000 l/h 1050** mm outlet 75 mm 32391 1 97 2.052
56000 l/h 1200* mm outlet 90 mm 15790 1 130 2.450
56000 l/h 1200** mm outlet 90 mm 32392 1 140 2.430
Top mount version
8000 l/h 450 mm outlet 50 mm 32430 1 19 0.280
9000 l/h 500 mm outlet 50 mm 32431 1 23 0.350
14000 l/h 600 mm outlet 50 mm 32432 1 26 0.480
22000 l/h 750 mm outlet 63 mm 33850 1 40 0.787
32000 l/h 900 mm outlet 63 mm 33851 1 56 1.276
* Small upper lid of 210 mm

** Upper lid of 400 mm
Filter
Filters up to 1050 mm can

be filted with side mounted
multiport valve. 900 and Filter
1050 mm filters with side
outlets are supplied without
multiport valve.
C
B
C
A
B
A
D D
Top mounted version Side mounted version

32430 32431 32432 33850 33851 15785 19353 15786 15787 15788 15789 32391 15790 32392
Filter mm 450 500 600 750 900 450 500 600 750 900 1050 1050 1200 1200
A mm 650 690 790 837 987 265 305 325 300 325 435 410 490 490
B mm 710 750 850 913 1063 125 125 125 230 270 270 270 270 270
C mm 880 920 1020 1124 1274 725 765 865 895 1080 1110 1235 1235 1360
D mm 347 400 400 490 625 347 400 400 490 625 760 775 855 940
Filtration area 0.16 0.19 0.30 0.44 0.64 0.16 0.19 0.30 0.44 0.64 0.86 0.86 1.13 1.13
Connections 11/2 11/2 11/2 2 2 11/2 11/2 11/2 2 21/2 21/2 21/2 90 90
Flow rate m /h at 50m /h/m
3 3 2
8 9 14 22 32 8 9 14 22 32 43 43 6 56
Pool (volume) m3 (8 hours) 64 72 112 176 256 64 72 112 176 256 344 344 448 448
Sand kg 60 95 148 245 415 60 95 148 245 415 660 660 1000 1000
124
FILTRAtioN
AstralPool Signature laminated filters

S I G N A T U R E
Atlas filter
FILTRATION
Reinforced polyester sand filter.
Technical features:
- Made of polyester resin and fibreglass.
- Excellent finish with gel-coat colour RAL 8029.
- The filter has been designed with higher coefficient of security, to guarantee a perfect operation.
- The union of the two bodies of the filter is carried out through a seal specially reinforced with fibreglass
and polyester resin.
- Large diameter plastic lid.
- Cap to make the sand discharge into the filter easier.
- Fitted with 1" collector arms and diffuser made from unplasticised PVC.
- Interior pipe with tubes of PN-16.
- Sand purge of 21/2".
- Fitted with pressure gauge, air purge and manual water drain.
- Connections to multiport valve with six positions: filter, backwash, rinse, recirculate, waste and closed.
- AstralPool innovation: The filter has a security valve to avoid any over-pressure.
- Maximum working pressure of 2.5 Kg/cm2.
Includes multiport
500 mm outlet 11/2 36596 1 20 0.26
600 mm outlet 11/2 36597 1 25 0.43
750 mm outlet 2 36598 1 33 0.75
Does not include multiport

*See disclaimer 900 mm outlet 21/2 36599 1 51 0.93
Code 36596 36597 36598 36599

Filter mm 500 600 750 900
Connections 11/2 2 21/2
Filtering surface (m2) 0.19 0.30 0.44 0.64
Filtering velocity (m3/h/m2) 50
Flow (m3/h) 9.5 15 22 30
Working pressure (bar) 2.5
Sand (kg) 120 190 360 580
Net weight (kg) 20 25 33 51
Dimensions:
Code A ( mm ) B ( mm ) D ( mm ) H ( mm ) M ( mm ) N ( mm )
36596 400 120 545 830 125 300
36597 480 145 640 905 125 325
36598 550 165 790 1050 230 310
36599 630 190 940 1185 270 410
Sand drain of 2 1/2" and water drain of 3/4"

with security valve.
125
FILTRAtioN
Filtration bed 1 m
LAMINATED FILTERS
The new range of laminated Delta filters has evolved from the PTK filter series. Using new manufacturing pro-
cesses, which provides multiple product configuration options.
A new 30% larger joint reinforces the seal of both parts of the filter with double security: fibreglass laminated
on the inside and high tensile strength composite at the outer union of the filter. All connections are on a
thicker base, thus improving resistance. Connection to any valve is also made easier thanks to the re-location
of the fittings. The height of the lower part of the filter has been increased in order to strengthen the internal
nozzle plate support. 2 year guarantee. Blue RAL 5024.colour. Other colours available on request, subject to
a minimum order of 5 filters.
Delta 10 filters
The Delta 1000 model is the equivalent of the PTK series 1000 and is available in 650, 800, 1000 and
1200 mm diameters. It features a 1m filtration bed and is available with either lateral or nozzle plate collector
systems.
- DN 200 filter lid with quick-locking system for 650 and 800 models and DN 400 bolt down lid for 1000
and 1200 models.
- DN200 lateral manhole with bolt down cover.
- Filter interior left with natural resin finish.
- Optional methacrylate sight glass available on request.
- Inner pipe and fittings in PVC, PP and ABS.
- Pressure gauge included in filter lid.
- Gaskets in EPDM and all screw fittings in stainless steel.
- Vinylester option. In this case, all laminated layers are manufactured from vinylester resin (and not only the
top layer in contact with the water), to a maximum chemical resistance of 0.4 ppm of ozone dissolved and
to a maximum water temperature of 40C.
Maximum working pressure 2.5 Kg/cm2 Conventional collector arms. Arm slots 0.3 mm
Diameter Flow** Standard Standard Standard

Outlet Code
m3/h Packaging Weight Kg Volume m3
mm
mm 40m3/h/m2
New 500 11/2 8 58682 1 - -

650 1 /2
1
13.3 36676 1 112 0.56
800 2 20.1 36677 1 115 0.88
1000 21/2 31.4 36678 1 121 1.45
1200 90 45.2 36679 1 113 2.17
** Maximum flow and filtration velocity recommended
Maximum working pressure 2.5 Kg/cm2 Nozzle collector plate. Nozzle slots 0.5 mm
Diameter Flow** Standard Standard Standard

Outlet Code
mm
mm 40m3/h/m2
650 11/2 13.3 36684 1 119 0.60

800 2 20.1 36685 1 121 0.93
1000 21/2 31.4 36686 1 129 1.54
1200 90 45.2 36687 1 123 2.34
** Maximum Flow and filtration velocity recommended
*except diam. 1200 mm models
126
FILTRAtioN
Filtration bed 1.2 m LAMINATED FILTERS
Delta 12 filters
FILTRATION
The Delta 1200 filter is equivalent to the old PTK series 1200 and is available in 650, 800, 1000 and 1200
mm diameters. The high performance filter bed measures 1.2 m and is available with either lateral or nozzle
plate collector systems.
- DN 200 filter lid with quick-locking system for 650 and 800 models and DN 400 bolt down lid for 1000
and 1200 models.
- DN200 lateral manhole with bolt down cover.
- Filter interior left with natural resin finish.
- Methacrylate sight glass as standard. Further sight glasses are available on request.
- Internal pipe and fittings in PVC, PP and ABS.
- Pressure gauge included in filter lid.
- Gaskets in EPDM and all bolt fasteners in stainless steel.
- Vinylester option. In this case, all laminate layers are manufactured from vinylester resin (and not only the
top layer in contact with the water), to a maximum chemical resistance of 0.4 ppm of ozone dissolved and
to a maximum water temperature of 40C.
Maximum working pressure 2.5 Kg/cm2 Conventional collector arms. Arm slots 0.3 mm
Diameter Flow Standard Standard Standard

Outlet Code
mm
mm 40m3/h/m2
650 11/2 13.3 36680 1 120 0.60

800 2 20.1 36681 1 121 0.92
1000 21/2 31.4 36682 1 129 1.54
1200 90 45.2 36683 1 130 2.24
Maximum working pressure 2.5 Kg/cm2 Nozzle collector plate. Nozzle slots 0.5 mm

Nozzle plate detail
Outlet
m3/h Code
mm Packaging Weight Kg Volume m3
mm 40m3/h/m2
650 11/2 13.3 36688 1 127 0.64

800 2 20.1 36689 1 127 0.97
1000 21/2 31.4 36690 1 137 1.63
1200 90 45.2 36691 1 141 2.42
Collector arms detail
Note: Codification options according to table on page 147
127
FILTRAtioN
LAMINATED FILTERS
Delta filters
Technical features
DELTA 10 DELTA 12
Collector arms Nozzle plate Collector arms Nozzle plate
58682 36676 36677 36678 36679 36684 36685 36686 36687 36680 36681 36682 36683 36688 36689 36690 36691
D (mm) 500 650 800 1000 1200 650 800 1000 1200 650 800 1000 1200 650 800 1000 1200
P(mm) 400 490 625 890 1145 490 625 890 1145 585 700 890 1145 585 700 890 1145
H (mm) 1680 1702 1749 1840 1915 1802 1843 1955 2071 1825 1830 1960 2022 1925 1924 2075 2128
L (mm) - 1000 1000 1000 1000 1000 1000 1000 1000 1200 1200 1200 1200 1200 1200 1200 1200
S (mm) 125 125 230 270 300 125 230 270 300 125 230 270 300 125 230 270 300
T 200 200 200 400 400 200 200 400 400 200 200 400 400 200 200 400 400
G 11/2" 11/2" 2" 21/2" 3" 11/2" 2" 21/2" 3" 11/2" 2" 21/2" 3" 11/2" 2" 21/2" 3"
Flow rate m/h at 30 m/h/m 5.88 9 15 23 34 9 15 23 34 9 15 23 34 9 15 23 34
Flow rate m/h at 40 m/h/m 7.84 12 20 30 45 12 20 30 45 12 20 30 45 12 20 30 45
Anthracite 0.8 1.6 mm (l) - - - - - - - - - 148 250 387 564 148 250 387 564
LAYER MULTILAYER
Sand 0.4 0.8 mm (Kg) - - - - - - - - - 160 271 419 611 160 271 419 611
Gravel 1 2 mm (Kg) - - - - - - - - - 46 78 120 175 46 78 120 175
Gravel 3 5 mm (Kg) - - - - - - - - - 86 156 300 350 46 78 120 175
Sand 0.4 - 0.8 mm (kg) 245 400 640 990 1425 400 640 990 1425 451 767 1325 1763 451 767 1325 1763
SINGLE
Gravel 1 - 2 mm (kg) 60 86 156 300 350 46 78 120 175 86 156 300 350 46 78 120 175
128
FILTRAtioN
Filtration bed 1.2 m LAMINATED FILTERS
Norma filters
FILTRATION
Laminated filter in polyester reinforced with fibreglass (PRFV). Filtration bed can be of single or multilayer.
Maximum working pressure 2.5 kg/cm2. Complies with DIN standard 19643/19605. Collector system with noz-
zle plate (0.5 mm slot). Fitted with sight glass, sand dump port, lateral manhole, pressure gauge and manual
air vent and water purge. Top sand charge lid 200 mm and manhole 200 mm or 400 mm according to
model type. PVC and PP internal components. A4 bolts and EPDM gaskets. Options: Interior vinylester coat-
ing (resistant to ozone concentrations <0.4 ppm) and maximum temperature of 40C. Standard colour: Ivory.
Maximum working pressure 2.5 Kg/cm2

Filtration Outlet Code
velocity mm
mm 30m3/h/m2
650 30 90-75 10 08142 1 100 1.33

800 30 90-75 15 08143 1 125 2.00
1.000 30 140-110 23 08144 1 145 3.00
1.200 30 140-140 34 08145 1 177 5.50
650 mm 1000 mm 1200 mm

800 mm
TECHNICAL FEATURES
08142 08143 08144 08145

D (mm) 650 800 1000 1200
A (mm) 680 700 770 950
B (mm) 1660 1640 1655 1790
H (mm) 2480 2480 2490 2640
L (mm) 1200 1200 1200 1200
M (mm) 1650 1650 1980 1600
N (mm) 320 320 340 400
C1 (mm) 90 90 140 140
C2 (mm) 75 75 110 140
Flow rate m/h at 30 m/h/m 10 15 23 33
Antracita 0.8 1.6 mm (l) 148 250 390 564
LAYER MULTILAYER
Sand 0.4 0.8 mm (Kg) 160 271 420 611

Gravel 1 2 mm (Kg) 46 78 120 175
Gravel 3 5 mm (Kg) 46 78 120 175
Sand 0.4 - 0.8 mm (kg) 451 767 1215 1763
SINGLE
Gravel 1 - 2 mm (kg) 46 78 120 175
129
FILTRAtioN
LAMINATED FILTERS
Berlin filter
Bright satin finish with a transparent polyurathane varnish dust-repellant coating. 230 mm injected lid fixed
with bolts. Fitted with pressure gauge, manual air vent, water purge, and side mounted multiport valve. Maxi-
mum filtration velocity 50 m3/h/m2.
With multiport valve:

9000 l/h 500 mm outlet 11/2 00541 1 17.3 0.230
14000 l/h 600 mm outlet 11/2 00542 1 21.8 0.360
21000 l/h 750 mm outlet 2 00543 1 36.0 0.620
Without multiport valve:

30000 l/h 900 mm outlet 21/2 00544 1 60.0 0.980
Without multiport valve and

with 400 mm polyester and FV lid:
43000 l/h 1050 mm outlet 75 mm 00545 1 101.0 1.610
56000 l/h 1200 mm outlet 90 mm 00546 1 130.0 2.306
D D
H
H
M
M
N
N
With multiport valve Without multiport valve
Side mounted valve Without valve Monoblocs

00541 00542 00543 00544 00545 00546 00547 00548
D mm 500 600 750 900 1050 1200 500 600
H mm 805 910 1050 1145 1300 1450 - -
M mm 450 505 610 685 810 870 - -
N mm 325 380 380 415 500 560 - -
Connections 11/2 11/2 2 21/2 *D75 **D90 11/2 11/2
Flow rate m3/h at 50 m3/h/m2 9 14 21 30 43 56 9 14
Pool (volume) m3 50-75 75-115 115-170 170-240 240-350 350-450 50-75 75-115
Sand kg 100 175 300 525 575/300 800/300 100 175
Maxi working pressure kg/cm2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Net weight kg 14.6 18.6 27.5 43.4 83 93 - -
Packaging volume m3 0.23 0.36 0.26 0.99 1.92 2.75 - -
130
FILTRAtioN
Compact housings without inner assembly
In-ground compact housings with Berlin filter
FILTRATION
Made in polyester and fibreglass. Includes filter, multiport valve, pump, control cabinet, with programmer and
valve manifold.
In-ground compact
500 mm Pump 0.37 kW ( /2 HP) 230 V II
1
00549 1 82.0 0.948
600 mm Pump 0.55 kW (3/4 HP) 230 V II 00550 1 92.0 0.948
750 mm Pump 1.10 kW (1.5 HP) 230 V II 00551 1 182.0 2.229
Semi in-ground compact housings with Berlin filter

Made in Polyester and fibreglass. Includes filter, multiport valve, pump, control cabinet with programming unit
and valve manifold.
Semi in-ground compact
500 mm Pump 0.37 kW (1/2 HP) 230 V II 00552 1 64.0 1.056
600 mm Pump 0.55 kW (3/4 HP) 230 V II 00553 1 74.0 1.056
750 mm Pump 1.10 kW (1.5 HP) 230 V II 00554 1 121.0 1.791
Consult our wide range of housings for your filtration needs
Compact housings with inner assembly
Ramses above-ground compact housing

Designed for outdoor installation. Lid with reinforced edge. Size: 160 x 90 x 119
Without inner assembly 25881 1 25 0.400
With Aster 550 filter and Sena 1CV S/A pump 25881AS55001 1 - -
Keops in-ground compact housing

In-ground plastic injection moulded compact housing. Fully equipped and pre-assembled, it has the capacity
for a filter of up to 660 mm in diameter, a pump, a control box (optional in C/A models), a valve manifold and
a dispenser (optional). For Cantabric, Millennium and Aster filters. A 4-kg off-line chlorine and bromine tablet
dispenser (code 11130) can be optionally fitted.
Aster 500 0.7 CV Victoria Plus S/A 41477 1 - -

Aster 500 0.7 CV Victoria Plus C/A 41478 1 - -
Aster 600 1 CV Victoria Plus S/A 41479 1 - -
Aster 600 1 CV Victoria Plus C/A 41480 1 - -
Millenium 480 0.7 CV SENA S/A 31132 1 - -
Millenium 480 0.7 CV SENA C/A 31133 1 - -
Millenium 560 1 CV SENA S/A 31134 1 - -
Millenium 560 1 CV SENA C/A 31135 1 - -
Cantabric 500 0.7 CV A. Victoria Plus S/A 41481 1 - -
Cantabric 500 0.7 CV A. Victoria Plus C/A 41482 1 - -
Cantabric 600 1 CV A. Victoria Plus S/A 41483 1 - -
Cantabric 600 1 CV A. Victoria Plus C/A 41484 1 - -
131
FILTRAtioN
Compact housings with inner assembly
Ramses in-ground compact housing

In-ground compact housing made of injected reinforced polymer with fibreglass. Has the capacity to hold a
laminated Aster filter 550 mm in diameter and a 1-CV SENA recirculation pump. This compact housing can
cover the needs of pools of up to 10 x 5 m
41910 1 76 1.18
93,50
132 132 202,50
1088
1015
757
100
1065
Eco Ramses in-ground compact housing

In-ground compact housing made of injected reinforced polymer with fibreglass. Has the capacity to hold a
laminated Aster filter 550 mm in diameter a 1-CV SENA recirculation pump and a hydrocyclone prefilter de-
signed to save water in filter backwashing and prolong the time they can go without maintenance (backwashing
of the filter medium). They save around 50% in water required for filter backwashing.
38451AS55050 1 80 1.18
93,50
132 132 202,50
1088
1015
757
100
1065
Kefrn semi-in-ground compact housing

Semi-in-ground plastic injection moulded compact housing. Fully equipped and pre-assembled, it has the ca-
pacity for a sand filter of up to of 600 mm in diameter, a lateral selector valve and a recirculation pump. For
Cantabric, Millennium and Aster filters. A control box can be optionally fitted.
Aster 500 0.7 CV Victoria Plus S/A 41485 - - -

Aster 500 0.7 CV Victoria Plus C/A 41486 - - -
Aster 600 1 CV Victoria Plus S/A 41487 - - -
Aster 600 1 CV Victoria Plus C/A 41488 - - -
Millenium 480 0.7 CV Sena S/A 33394 - - -
Millenium 480 0.7 CV Sena C/A 33395 - - -
Millenium 560 1 CV Sena S/A 33396 - - -
Millenium 560 1 CV Sena C/A 33397 - - -
Cantabric 500 0.7 CV Victoria Plus S/A 41489 - - -
Cantabric 500 0.7 CV Victoria Plus C/A 41490 - - -
Cantabric 600 1 CV Victoria Plus S/A 41491 - - -
Cantabric 600 1 CV Victoria Plus C/A 41492 - - -
132
FILTRAtioN
Multiport valves
A wide range of valves which offers the New Generation series, the Classic series and Flat series with 1
FILTRATION
and 2 valve configurations. The Magnum series with 2, 3 and 4 valves completes the range.
Six-port multiport valve
A six-port selector valve able to perform several functions in a hydraulic circuit: filtration, flushing, shut-off,
backwashing and rinsing of the filter. Its extremely functional design means that it can be fitted up to any
installation. All joints will be perfectly sealed and it is easy to operate.
Its minimum friction and resistance, maximum safety and pleasant finish were decisive factors in choosing the
materials that best adapted to the needs of all of its components: ABS body, lid and handle, PPO distributor,
EPDM gaskets, metal parts in stainless steel.
Connection options in multiport valve
New Generation Classic Flat Magnum
Lower
Connection options Connection
outlets
1
1 2 1 2 1 2 3
Eco
Configuration 1
Both filter inlet Threaded 28509 11542 08938
"Top" and filter
Without
outlet "Bottom"
connection
from and to the
MPV base. Smooth 00597
Configuration 2 With Threaded

Filter inlet "Top" connection Smooth 15385 15389
from the MPV
base and filter Threaded 28510 11366 08939
outlet "Bottom" Without
to the MPV side. connection Smooth
Filter inlet Threaded

"Top" from the With
Configuration 3 MPV side and connection
filter outlet
Smooth 20569 28512 00599 07444 34543 24837
"Bottom" to the
MPV base. This
configuration can
Threaded 23108 28511 14909 07441 34544 24838
be supplied with
pipework and Without
connections for connection
side mounting. Smooth 20043 00598 34545
Configuration 4 Both the filter Threaded 28513 11368 08940

inlet "Top" and
the filter outlet Without
"Bottom" from connection
and to the MPV Smooth
sides.
Configuration 5
Threaded 28514 28515
All inlets and Without

outlets open. connection
Smooth
Without Threaded
TOP
connection Smooth 32583 20565 33968 22490 34546
133
FILTRAtioN
Multiport valves
New generation of manual multiport valves which incorporate a bayonet closing system (replacing bolts).
This eases dismantling for maintenance and prevents rust. The range includes the 1 and 2 versions,
including a Top Eco version available in 1.
11/2 and 2" multiport valve with filter connections - New Generation

Configuration 3 - 1 1/2" 20569 6 14.0 0.079
Configuration 3 - 2" 28512 6 26.4 0.165
Configuration 3 - 1 1/2" NPT 22355 - - -
Configuration 3 - 2" NPT 30788 - - -
11/2 and 2 multiport valve - New Generation

Multiport valve 11/2" - Configuration 3 20043 - 11.5 0.079
Multiport valve 2":
Config. 1 28509 6 22.3 0.165
Config. 2 28510 6 22.3 0.165
Config. 3 28511 6 22.3 0.165
Config. 4 28513 6 22.3 0.165
Config. 5 28514 6 22.3 0.165
Multiport valve 11/2" NPT - Configuration 3 22356 - - -
Multiport valve 2" NPT - Configuration 3 30795 - - -
Dimensions A B E F H I J K L M N O P Q R T W X
(mm)
1 294 205 64 61 - - 43 30 95 90 121 31 1 6 50 125 97.5 211

96
2 350 242 76 62.5 127 240 42 31.5 115.5 105.5 145 31.5 2 5 63 230 120 247
P
A
U P
M U
P M
B P
R O E
E
T R
U E
T
R
N U
R
O
N
O F
R
Q
H
W N
O
X
L
P
J K
I
134
FILTRAtioN
Multiport valves
11/2 and 2" multiport valve. Top Config. - New Generation
FILTRATION
Top 11/2" Multiport valve 20565 6 12.1 0.079
Top 2" Multiport valve 33968 1 3.95 0.028
Top 11/2" NPT Multiport valve 22358 - - -
C
P
U
M
P
D
O E
R
E
T
U
R
N
O G
Dimensions C D E G J K L M N O P Q S U
(mm)
Q
1 280 193 64 47 43 30 95 90 121 31 1 6 50 203
173 S
2 350 242 76 62.5 42 31.5 115.5 105.5 145 31.5 2 5 63 208 U
N
O
P
J K
11/2 multiport valve. Top ECO version - New Generation

6-way multiport valve for above ground pool filters where the pressure does not exceed 1.5 bar, of maximum
diameter 380 mm. Bayonet closing system.
Top ECO 11/2" multiport valve 32583 6 8.83 0.082
38.5
120
185
115
120
38.5
44.5
115
50
173
38.5
203
135
FILTRAtioN
Multiport valves
Manual multiport valves with six channels to carry out different functions in an hydraulic circuit. Its design,
basically functional, offers a wide range of possibilities of connection to any installation, assuring perfect
water-tightness and comfortable handling.
11/2 and 2" multiport valve with filter connections - Classic

11/2" multiport valve- Configuration 3 00599 6 15.5 0.079
2" multiport valve- Configuration 3 07444 6 22.7 0.150
11/2" NPT multiport valve- Configuration 3 06673-0700 - - -
2" NPT multiport valve- Configuration 3 09848 - - -
11/2 and 2" multiport valve - Classic

11/2" multiport valve - Configuration 1 00597 6 12.2 0.079
2" multiport valve - Configuration 3 07441 6 19.9 0.150
11/2" NPT multiport valve - Configuration 3 06595 - - -
2" NPT multiport valve - Configuration 3 07440 - - -
2 TOP multiport valve- Classic

6-way TOP multiport valve for residential pools. Body, cover and handle injected in ABS. 2" thread.
2" TOP multiport valve 22490 1 3.45 0.028

2" TOP NPT multiport valve 22492 - - -
Dimensions (mm) A B C D E F G H I J K L M N O P Q R S
1 271 180 64 61 101.5 172 43 30 95 90 121 31 1 6 50 125 97.5 211

96
2 317 211 76 62.5 127 237 42 31.5 115.5 105.5 145 31.5 2 5 63 230 120 247
2 TOP multiport valve - Classic 11/2 and 2" multiport valve - Classic
136
FILTRAtioN
Multiport valves
FILTRATION
Introducing a new multiport valve which for the first time features a special compact look thanks to its
single-level design (compared to the normal twin-level set-up in other multiport valves). This reduced size
makes the equipment especially suitable in installations where space is at a premium, such as in filter
housing or monoblocks.
11/2 lateral multiport valve with filter connections - Flat

Configuration 3 34543 1 - -
11/2 lateral multiport valve - Flat

Configuration 3 (bottom port threaded) 34544 1 - -
Configuration 3 (bottom port solve weld) 34545 1 - -
11/2 TOP multiport valve - Flat

34546 1 - -
183.5
175
126
R
PUMP E
1
117.3
139
T
R U
R
1
E
T N
46
U
R
N
61.5
PUMP 1-50
R
E
T
U
R
N
23 86 1-50
1 173
125
203
23 86
88
1
98
64
98.5
88
207
1
23
64
98.5
92 75
1
23 75
137
FILTRAtioN
Multiport valves
Specially designed to support high working pressures and connection to large filters which require special
connections. Choose from the models offered: 2 , 3 and 4 multiport valves.
21/2 multiport valve with filter connections - Magnum

Multiport valve with connections to pool pipes.

21/2 multiport valve - Magnum

Filter inlet from the side and outlet from the bottom. With connections to pool pipes.

160
59
440
38
2
148
292
75
92
2
2
270
74
44 200
2
108
153
296
146
6
44 44
298
138
FILTRAtioN
Multiport valves
3 multiport valve - Magnum
FILTRATION
Side mounted 6-way multiport valve for connecting to filters. Body and cover injected in ABS and fibre glass.
Handle injected in ABS. Sealing system by stainless steel screws. Supplied with two plugs so that the cus-
tomer can adapt the valve to the most suitable configuration.
3" multiport valve 28515 1 9.8 0.064

3" NPT multiport valve 30798 - - -
500
P
U
M
320
85.5 110
3
3 R
E
3
T
U
R
N
3 3
170
50 177
3
165
3
165
50 50
330
Automatic multiport valve System VRAC Flat 11/2

Low-priced automatic multiport valve model that stands out for its easy operation. Voltage 230/115 volts.
Controls filtration, backwashing, rinsing and emptying.
Top 43512 1 - -
Lateral 43513 1 - -
196
225
116
125
242
155
210
122.5
190
307
139
FILTRAtioN
Multiport valves
New
11/2 - 2" automatic multiport valve - Config. 3 System VRAC II Basic
Automatic multiport valve model provided with push button keyboard for operation. Controls filtration, back-
washing, rinsing and emptying.
Adaptability: Adapts to all installations with a sand filter and installed quickly and easily.
Comfort: With a simple programming using the keypad, you will receive a fully automated filtration of your
pool.
Hygiene: To obtain an optimal water quality for swimming, filtration runs every day, optimizing the wash
cycles.
Security: The automatic valve Basic Bulk System continuously monitors the filtration system, thus avoiding
potential mishaps with your filtration.
New informative LEDs.
Basic 11/2" side mounted, Config. 3 57186 1 4.27 0.023

Basic 2" side mounted, Config. 3 57187 1 5.75 0.033
Note: It is recommended that the Multiport safety valve (codes 41898, 41899) be fitted.
Hydraulic safety valve

The 1 '' hydraulic safety valve in the drain is specially designed for installation in the drain outlet of an
automatic selector valve on a pool sand filter. Using it prevents water loss when the valve changes its working
position or when the electricity flow fails and the valve remains in a position in which it could empty the pool.
It is recommended in installations with SYSTEM VRAC multiport valves.
With 50 mm straight double connection 41898 1 - -

With 1 BSP double hose connection 41899 1 - -
With 50 mm straight body connection 41897 1 - -
205
158
80
Pressure gauge panels

Including air vents.
With pressure gauges 3 kg/cm2 00729 1 1 0.007
Modbus es una marca registrada de Modbus Organization, Inc.
140
FILTRAtioN
FILTRATION
141
FILTRAtioN
Filtration media & accessories
New
Active Clear Glass
AstralPool launches the new activated glass filter media Active Clear Glass.
The new product has the following benefits:
More efficient and environmentally friendly filtration.
Greater filtration capacity.
Water and energy savings.
Cleaner filter bed as bacteria does not remain trapped and fewer chemical products are needed.
Granulomety
0.5 mm - 1.0 mm 57011 1 25.0 0.667
1.0 mm - 3.0 mm 57012 1 25.0 0.667
3.0 mm - 7.0 mm 57013 1 25.0 0.667
% Volume of the filter bed

Filters Filters
Code Range
D < 900 mm D > 900 mm
Range 1 57011 0.5 - 1.0 mm 80% 60%
Range 2 57012 1.0 - 3.0 mm 0% 20%
Range 3 57013 3.0 - 7.0 mm 20% 20%
Filtration sand
Please ask for a quotation for other
grades. 25 Kg bag.
Granulometry 0.4 - 0.8 mm 00596 1 25 0.667
Gravel
Please ask for a quotation for other Code Standard Standard Standard
grades. 25 Kg bag. Packaging Weight Kg Volume m3
Granulometry 1 - 2 mm 11347 1 25 0.667
Granulometry 3 - 5 mm 11346 1 25 0.667
Anthracite
Please ask for a quotation for other Code Standard Standard Standard
grades. 25 Kg bag. Packaging Weight Kg Volume m3
Granulometry 0.8 - 1.6 mm 03696 1 50 0.8
Active carbon
Product with high capacity of pullant retention. Coconut shell based activated carbon.
Surface area: 1000 m /g
2
Apparent density: 0.45 - 0.50 g/cm3 24366 1 - -
Zeolite
Natural porous material that has higher filtration qualities than the normal substrate. It can be compared to
that of diatomaceous earth but at a lower price and lasting much longer. Bags 25 Kg.
Zeolite standard 0.5 - 1 mm 25845 1 - -

Zeolite standard 1-2 mm 25846 1 30 0.023
142
Pumps
PUMPS
PUMPS
145 Variable speed pumps
147 AstralPool Signature Self-priming pumps
148 Self-priming pumps
150 Control boxes
153 Countercurrent swimming equipment: Swimtrainer
154 Marlin countercurrent swimming equipment -
quick selection guide
155 Countercurrent swiming equipment: Marlin
162 Submersible pumps
143
Pumps
144
Pumps
See the VIRON Variable speed pumps

energy efficiency calculator
on our website at
www.astralpool.com
New
Viron variable speed pumps
Variable speed pumps are born as a new concept of pool pump. Variable speed pumps Astralpool Viron are the
most efficient solution for the pool and let adjust its performance according to the installation and user needs.
By increasing and decreasing its speed, not only modify the speed and flow-rate, but also energy consumption.
Halving the speed of the pump is able to reduce the energy consumed in more than 85%. In addition, variable
speed pumps Viron is controlled through an LCD display with backlighting showing RPM and has 4 timer set-
PUMPS
tings for each day, allowing different speed settings.
AstralPool range in VIRON variable speed pumps is:
56550 Viron P320

Ideal for the average sized pool, the P320 eVo has a flow rate sufficient to back wash up 800 mm diameter
sand filters. The LCD display shows the RPM of the motor and provides up to four time periods each day with
different speed settings to provide the perfect flow rate for the pool.
The factory preset speeds incorporating the P320 model offers the following approximate flow rates:
High: 292lpm Mid: 206lpm Low: 128lpm.
Viron P600
The Viron P600 eVo is capable of the most demanding applications with high flow and high pressure all the
while delivering the utmost in energy efficiency.
In addition the P600 eVo incorporates electronic power factor correction which provides even further reduc-
56552 tions in power consumption, even on maximum speed.
The factory preset speeds incorporating the P600 model offers the following approximate flow rates:
High: 600lpm Mid: 426lpm Low: 200lpm.
Variable speed pump VIRON P320 56550 1 - -
Variable speed pump VIRON P600 56552 1 - -
TECHNICAL DATA SHEET VIRON P320 VIRON P600

374 KWh 367 KWh
Minimum annual energy cost
per year per year
Variable speed memory
LCD speed display screen
Speed settings for

each function
Adapts to pools and users
Variable priming rate
Selection of priming times from

2 to 120 min.
Up to 4 programmable speeds

per day
Built-in timers with speed

selection
Suitable for in-floor cleaning

systems
Suitable for large sand filters
Large pools require extra

circulation
Power factor correction
Easy-to-maintain motor
All electronic components can

be repaired or replaced
VIRON energy efficiency calculator

www.astralpool.com
145
Pumps
Variable speed pumps
Victoria Dual Speed pump

Two-speed pump. New ideas for energy saving and noise reduction meeting new legislation to improve energy
efficiency in appliances. Ultra-Filtered: Allows filtering of water overnight, taking advantage of cheaper elec-
tricity rates. Allows external use of programmable timers for programming of filter cycles. Power Range (high
speed): 1 HP - 1.5 HP - 2 HP to 2.5 HP. High speeds for washing, rinsing, treatment shock or heavy use. Low-
speed for filtration. Completely interchangeable with the Victoria Plus pumps, Sprint and Victoria.
1 HP II 45861 1 15 0.071
1.5 HP II 45657 1 17 0.071
2 HP II 45658 1 18 0.071
2.5 HP II 45708 1 19.5 0.071
For easy programming and optimal protection of the pump it is recommended to use the manuever lockers double pump speed
(code 45862, 45863) or timer (code 45864).
A Code 45861 45657 - 45658 45708

E
D
A 562 592 674
B 335 366 414
C 323 323 323
D 50 63 75
D
E 281 281 281

G
F 243 243 243

F
G 365 365 365

I
H
H 210 210 210
B
I 144.5 144.5 144.5
25
20
1 CV 1500 rpm
1 CV 3000 rpm
15
1.5 CV 1500 rpm
H (m.c.a)
1.5 CV 3000 rpm

10
2 CV 1500 rpm
2 CV 3000 rpm
5 2.5 CV 1500 rpm
2.5 CV 3000 rpm
0
0 2424 68 68 10 12 14 16 18 20 22 24 26 28 30 32 34
Control box
The control box makes it easy to program filter cycles that suit the needs of users 24 hours a day. The ultra-
silent mechanism also means that users can take advantage of cheaper night time electricity rates to perform
the filtering process.
For pumps of 1, 1.5 and 2 HP 45862 1 2.2 0.014
For pumps of 2.5 HP 45863 1 2.2 0.014
Digital timer
Easy-to-use and intuitive timer that can be quickly programmed at a glance. All of the filter cycles can be set
for any time of the day, with the possibility of using different programmes according to various factors, such as
the day of the week, the season, etc.
45864 1 0.15 0.0007
146
Pumps
S I G N A T U R E
AstralPool Signature Self-priming pumps
Columbia pump
High performance pump for residential pools offering silent operation and reliability at low temperatures. Avail-
able from 3/4HP to 3 HP, with single-phase and three-phase motors. Simple assembly with high quality me-
chanical seal and bearings. Easy-open strainer lid. Connections with standardised fittings. Possibility of remov-
ing the motor without touching the pumps hydraulic system. Flow rates in l/h at 10 m head for all the models.
ATB motor.
PUMPS
Models:
Columbia Single-phase pump
12000 l/h 0.6 kW (3/4 HP) 230 V II 32770 1 18.5 0.100
17500 l/h 0.78 kW (1 HP) 230 V II 32772 1 19.2 0.100
24000 l/h 1.1 kW (1.5 HP) 230 V II 32774 1 23.4 0.100
27000 l/h 1.5 kW (2 HP) 230 V II 32776 1 23.6 0.100
40000 l/h 2.2 kW (3 HP) 230 V II 32778 1 28.6 0.100
Columbia Three-phase pump,

12000 l/h 0.6 kW (3/4 HP) 230/400 V III 32771 1 18.8 0.100
17500 l/h 0.77 kW (1 HP) 230/400 V III 32773 1 19.4 0.100
24000 l/h 1.1 kW (1.5 HP) 230/400 V III 32775 1 21.7 0.100
27000 l/h 1.5 kW (2 HP) 230/400 V III 32777 1 21.8 0.100
40000 l/h 2.2 kW (3 HP) 230/400 V III 32779 1 24.0 0.100
25
20
H (m.c.a. )
15
10
1 HP 2 HP 3 HP
Maximum sound level (dBA): 5 0.75 HP 1.5 HP
3/4 HP = 66 dBA 0
1 HP = 66 dBA 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44
1.5 HP = 70 dBA Q (m 3/h)
2 HP = 70 dBA
3 HP = 75 dBA A
B F
C
F E
D
H
G
I
CODE A B C D E F G H I
32770 570 284.50 435 295 383.50 50 146.50 216 272
32771 570 284.50 435 295 383.50 50 146.50 216 272
32772 610 284.50 435 295 383.50 50 146.50 216 272
32773 610 284.50 435 295 383.50 50 146.50 216 272
32774 610 284.50 435 295 383.50 63 146.50 216 272
32775 610 284.50 435 295 383.50 63 146.50 216 272
32776 610 284.50 435 295 383.50 63 146.50 216 272
32777 610 284.50 435 295 383.50 63 146.50 216 272
32778 651 284.50 435 295 383.50 75 146.50 216 272
32779 626 284.50 435 295 383.50 75 146.50 216 272
147
Pumps
Optional:
60 Hz pumps (code XXXX-0810). Self-priming pumps
Pumps with NPT fittings
(code XXXXX-1110).
Victoria Plus pump

Robust design with new generation easy to handle lid-locking nut. Low noise levels due to rubber paddings.
IP-55 Motor protection. Large capacity strainer basket. Flow rates given at 8 m head for 1/3 HP and 1/2 HP,
and 10 head from 3/4 HP onwards.
3,000 rpm.
8,000 l/h 0.37 kW (1/3 HP) 230 V II 41224 1 13.0 0.071
10,000 l/h 0.43 kW (1/2 HP) 230 V II 38769 1 13.0 0.071
10,000 l/h 0.43 kW (1/2 HP) 230/400 V III 38770 1 13.0 0.071
11,000 l/h 0.61 kW (3/4 HP) 230 V II 38771 1 14.0 0.071
11,000 l/h 0.60 kW (3/4 HP) 230/400 V III 38772 1 14.0 0.071
16,000 l/h 0.78 kW (1 HP) 230 V II 38773 1 15.0 0.071
16,000 l/h 0.76 kW (1 HP) 230/400 V III 38774 1 15.0 0.071
21,500 l/h 1.10 kW (1.5 HP) 230 V II 38775 1 17.0 0.071
21,500 l/h 1.10 kW (1.5 HP) 230/400 V III 38776 1 17.0 0.071
26,000 l/h 1.50 kW (2 HP) 230 V II 38777 1 18.0 0.071
26,000 l/h 1.46 kW (2 HP) 230/400 V III 38778 1 18.0 0.071
30,500 l/h 1.85 kW (2.5 HP) 230 V II 53675 1 19.0 0.071
34,000 l/h 2.20 kW (3 HP) 230 V II 38779 1 19.0 0.071
34,000 l/h 2.20 kW (3 HP) 230/400 V III 38780 1 19.0 0.071
Performance curves
Sena pump
New generation pump range. Motors from 1/3 HP to 1.25 HP in single-phase and from 3/4 HP to 1.25 HP in
three-phase motors. GS marking. IP-55 Motor protection, Class F insulation. All parts in contact with water
made of S.S. AISI-316. 50 mm solvent weld fittings for connection. Flow rates given at 6 m head for 1/3 HP,
8 m head for 1/2 HP, and 10 m head for the rest of the range. 3,000 rpm.
7,000 l/h. 1/3 HP. 230 V II 25461 1 10.20 0.055

8,500 l/h. 1/2 HP. 230 V II 25462 1 10.20 0.055
9,000 l/h. 3/4 HP. 230 V II 25463 1 11.65 0.055
9,000 l/h. 3/4 HP. 230/400 V III 25464 1 11.40 0.055
11,800 l/h. 1 HP. 230 V II 25465 1 12.75 0.055
11,800 l/h. 1 HP. 230/400 V III 25466 1 13.00 0.055
14,000 l/h. 1.25 HP. 230 V II 25467 1 13.75 0.055
14,000 l/h. 1.25 HP. 230/400 V III 25468 1 13.55 0.055
Performance curves
148
Pumps
Optional:
60 Hz pumps (code XXXX-0810). Self-priming pumps
Pumps with NPT fittings
(code XXXXX-1110).
Alaska pump
The body of the pump is made of state-of-the-art thermoplastics. The single-phase, self-priming pumps come
in a range of 0.33 HP to 1.25 HP. A pre-filter is mounted in body of the pump to prevent foreign objects from
entering it that may damage its hydraulic parts. The motors that are supplied with the pump have IP-55 protec-
tion and are designed to withstand hot climates and high levels of humidity.
PUMPS
7,000 l/h 0.23 kW (1/3 HP) 230 V II 41607 1 10 0.04
7,700 l/h 0.38 kW (1/2 HP) 230 V II 41608 1 10.3 0.04
9,900 l/h 0.52 kW (3/4 HP) 230 V II 41609 1 11.2 0.04
12,800 l/h 0.71 kW (1 HP) 230 V II 41610 1 12 0.04
14,000 l/h 0.82 kW (1.25 HP) 230 V II 41611 1 13 0.04
Performance curves
0 5 10 15 20
Alaska Plus pump

The Alaska Plus pump new hydraulic design moves water more efficiently and more quietly than any other
pump of its category. Alaska Plus is built to be quiet, durable and reliable. Motor materials are rustproof, stain-
less steel motor shaft and sealed bearings that never need lubrication. Its thermoplastic housing withstands
extreme heat and resist corrosion.
Available from 0.5 Hp up to 3 Hp in both single phase and three phase motors.
It saves money, as it moves the same required water but with less consumption that our previous pump.
The new hydraulic design assures extremely low noise level performance while works at typical conditions.
A pre-filter with a big strainer has been integrated into the body of the pump to prevent the entry of any
foreign bodies which could cause damage to the hydraulic parts of the pump.
Big strainer basket extends time between cleanings.
See through lid makes inspection fast and easy.
Monophase
11,000 l/h 0.4 kW (1/2 CV) 230 V II 51858 1 13 0.072
13,000 l/h 0.5 kW (3/4 CV) 230 V II 51860 1 14.2 0.072
16,000 l/h 0.7 kW (1 CV) 230 V II 51862 1 15.2 0.072
23,000 l/h 1.1 kW (1.5 CV) 230 V II 51864 1 18.8 0.072
27,000 l/h 1.5 kW (2 CV) 230 V II 51866 1 20.3 0.072
35,000 l/h 2.2 kW (3 CV) 230 V II 51868 1 22.3 0.072
Threephase
16,000 l/h 0.7 kW (1 CV) 230/400 V III 51863 1 16.2 0.072
23,000 l/h 1.1 kW (1.5 CV) 230/400 V III 51865 1 18.8 0.072
27,000 l/h 1.5 kW (2 CV) 230/400 V III 51867 1 20.3 0.072
35,000 l/h 2.2 kW (3 CV) 230/400 V III 51869 1 23 0.072
Performance curves
3 CV
CV CV 1 CV 1 CV 2 CV
0 10 20 30 40
149
Pumps
Control boxes
Smartspeed
Variable speed control boxes and pumps for public swimming pools.
Smartspeed 3 HP 52246 1 13.5 0.078
Smartspeed 3.5 HP 52247 1 13.5 0.078
Smartspeed 4.5 - 5.5 HP 52248 1 13.5 0.078
Smartspeed 7.5 HP 52249 1 13.5 0.078
Smartspeed 10 HP 52250 1 13.5 0.078
Smartspeed 12.5 - 15 HP 52251 1 13.5 0.078
Control box for pump control

IP-65 protection. Glass panel with lock and key. All units are compatible with:
- 220/240V 1-phase (P+N+T) 50Hz/60Hz
- 380/415V 3-phase (3P+N+T) 50Hz/60Hz
- 220/230V 3-phase (3P+T) 50Hz/60Hz
24h programming clock with hourly programming. Connection for remote control of pump (on/off,...) and for
auxiliary equipment (cold detector, level control...). All products supplied with:
- Electrical diagram
- Connection diagram
- Instructions for installation
- CE conformity certificate
- Stuffing box at every cable entrance
- Screws and plugs (4) for fixing to wall
The control box model should be selected according to the nominal voltage of the pump:
Current Power Range Power Range Power Range

Type
Range 1-phase 230V 3-phases 400V 3-phases 230V
A 1.6A - 2.5A 14 HP 3/4 HP - 1 HP 1/2 HP
B 2.5A - 4A 1/2 HP 1.5 HP - 2 HP 3/4 HP - 1 HP
C 4A - 6.3A 3/4 HP - 1 HP 3 HP* 1.5 HP
D 6A - 10A 1.5 HP 4 HP** 2 HP - 3 HP
* Also 3.5 HP 400V 3~ in plastic (Code 08003)

** Also 4.5 and 5.5 HP 400 V 3~ in plastic (Codes 08004, 08005)
Control box for pump overload protection

Thermal overload protection ( 1.6 to 10A), contactor, 24 hr programming clock, modular switch with 3 posi-
tions, Auto / 0 / Manual.
Packaging Weight Kg Volume
Type A 25717 1 1.5 -
Type B 25718 1 1.5 -
Type C 25719 1 1.5 -
Type D 25720 1 1.5 -
150
Pumps
CONTROL BOXES
Control box for pump overload protection and underwater light

External transformer. Thermal overload protection ( 4 poles, 10 A Max.), contactor, 24 hr. programming clock,
modular switch "Auto / 0 / Manual". 230V 16A protected and controlled output for lights.
PUMPS
Type A 25721 1 1.6 -
Type B 25722 1 1.6 -
Type C 25723 1 1.6 -
Type D 25724 1 1.6 -
Control box for pump overload protection and underwater light with differential protection
External transformer with differential protection (only for 230V monophase). Thermal overload protection (4
poles, 10 A Max.), contactor, 24 hr. programming clock, modular switch "Auto / 0 / Manual". 230V 16A pro-
tected and controlled output for light. Differential switch 2 x 40A - 30 mA MONOPHASE.
Type A 25725 1 1.9 -

Type B 25726 1 1.9 -
Type C 25727 1 1.9 -
Type D 25728 1 1.9 -
Control box for pump overload protection and underwater light with differential protection
External transformer with differential protection (only for 400V three-phase). Thermal overload protection (4
poles, 10 A Max.), contactor, 24hr programming clock, modular switch "Auto / 0 / Manual". 230V 16A pro-
tected and controlled output for light. Differential switch 4 x 40A - 30 mA THREE-PHASE.
Type A 25729 1 1.9 -

Type B 25730 1 1.9 -
Type C 25731 1 1.9 -
Type D 25732 1 1.9 -
Control box for pump overload protection and 1 underwater light

Thermal overload protection (4 poles, 10 A Max.), contactor, 24 hr. programming clock, modular switch "Auto
/ 0 / Manual". Transformer 230/12 V -300VA for 1 underwater light of 300W.
Type A 25733 1 6 -
Type B 25734 1 6 -
Type C 25735 1 6 -
Type D 25736 1 6 -
Control box for pump overload protection and 2 underwater lights

Thermal overload protection (4 poles, 10 A max.), contactor, 24 hr. programming clock, modulator switch "Auto
/ 0 / Manual". Transformer 230/12 V - 600VA for 2 underwater lights of 300W.
Type A 25737 1 8 -
Type B 25738 1 8 -
Type C 25739 1 8 -
Type D 25740 1 8 -
151
Pumps
CONTROL BOXES
Control box with overload protection for 2 pumps and control for 1 underwater light
Thermal overload protection (1srt pump: 4 poles, 10 A max. / 2nd pump: 2 poles, 10 A max.), contactor, 24
hr. programming clock, modular switch "Auto / 0 / Manual". Transformer 230/12 V -300VA for 1 underwater
light of 300W.
Type C + Type D 25741 1 7.5 -

Type D + Type D 25742 1 7.5 -
Control box with protection for 2 pumps and control for 2 underwater lights
Thermal overload protection (1srt pump: 4 poles, 10 A max. / 2nd pump: 2 poles, 10 A max.), contactor, 24
hr. programming clock, modular switch "Auto / 0 / Manual". Transformer 230/12 V -600VA for 2 underwater
light of 300W.
Type C + Type D 25743 1 9.5 -

Type D + Type D 25744 1 9.5 -
Control box with protection for 2 pumps and control for 3 underwater lights
Thermal overload protection ( 4 poles, 10 A max.), contactor, 24 hr. programming clock, modular switch
"Auto / 0 / Manual". Transformer 230/12 V -600VA + 300VA for 3 underwater light of 300W.
Type A 27088 1 9.5 -
Type B 27089 1 9.5 -
Type C 27090 1 9.5 -
Type D 27091 1 9.5 -
Encapsulated security transformer IP-65 for pool

Manufactured according to the rules UNE-EN 61558 and directive CE.
-IP-657 housing protection degree.
-Transformer Class II. Total Protection against electric shock.
-Self-extinguishing housing IEC 695-2-1
-Frequency 50/60 Hz
130 VA to 220-240V to 12 V 35807 1 3.2 0.02
400 VA to 220-240V to 12-17 V 35385 1 6.8 0.04
800 VA to 220-240V to 12-17 V 35386 1 10.4 0.04
152
Pumps
Countercurrent swimming equipment: Swimtrainer
AstralPool Swimtrainer
Countercurrent swimming equipment control device, with an intuitive use, tactile and waterresistant. The de-
vice allows an easy and intuitive programming of the intensity and duration for the training, allowing an usage
in a great range of applications, such as training, aqua gym, leisure and massage needs. The device includes
several in-built programs fitting the most common usages.
PUMPS
The AstralPool Swimtrainer device can be used in any countercurrent installation, either new or existing ones
(up to 4.5 HP 3-phase pumps). Easy and fast installation without needing complex systems. The AstralPool
Swimtrainer device has a tactile screen and an electrical cabinet, which includes the inverter and all the pump
protection devices. Tactile and water resistant screen. The device provides energy saving to the countercurrent
system, thanks to the inverter usage. Code Standard Standard Standard
AstralPool Swimtrainer 51849 1 16.1 0.037
253 413 215

150 65 300
172
92
153
Pumps
Marlin countercurrent swimming equipment - quick selection guide
equipment with equipment with twin

s.s.housing plastic houing equipment
hand grips hand grips
Polished S.S. rectang. Painted S.S. rectang. Painted S.S. round Polished S.S. Polished S.S.
00246 09447 07536 demi-circular 37214 05557
NOZZLE FACEPLATE NOZZLE FACEPLATE NOZZLE FACEPLATE
Polished Rectang. Round Polished Rectang. Round With grab holder Rectang.
S.S. white white S.S. white white in white plastic white plastic
rectang. plastic plastic rectang. plastic plastic
11499 11501 11500 11014 11015 11016 11013 11508
HOUSING HOUSING HOUSING HOUSING
For concrete For prefabri- For concrete For prefabri- For concrete For prefabri-
pools cated pools pools cated pools pools cated pools
S.S. Housing S.S. Housing Housing in Housing S.S. Housing Housing

00243 00243 plastic 11502 11502 05555 05555
Accessories Accessories Accessories

00248 11503 05558
pumps pumps
230 V II 1.5 Kw (2 HP) 11505 230 V II 1.5 Kw (2 HP) 28566

230/400 V III
230 V II 2.2 Kw (3 HP) 25415 230 V II 2.2 Kw (3 HP) 28568 3.3 Kw (4.5 HP)
230/400 V III 2.2 Kw (3 HP) 30774 11509
230/400 V III 2.60 Kw (3.5 HP) 11504
control box
control box
230 V II 1.5 Kw (2 HP) 11507
230 V II 2.2 Kw (3 HP) 25456
400 V III 3.3 Kw (4.5 HP) 11510
400 V III 2.2 Kw (3 HP) 32151
230/400 V III 2.6 Kw (3.5 HP) 11506
154
Pumps
Countercurrent swiming equipment: Marlin
Pump assembly with horizontal discharge

Accesssories recommended for the assembly
(not included in the kit)
Pos. Q. Denomination Code
1 2 PVC Valve 63 mm 02458
Adapter nipple
PUMPS
2 2 02107
63 mm x 2" male thread
VENTILATION DN-100 - - PVC pipe 63 mm PN-6 02692
DRAINAGE
KEEP MINIMUM 100
ELECTRIC CONNEXION BOX:

must be installed in a dry area Dimensions in mm
Minimum pit dimensions: 1150 x 800 x 700 mm
Pump assembly with vertical discharge

Accesssories recommended for the assembly
(not included in the kit)
VENTILATION DN-100 Pos. Q. Denomination Code
2 2 PVC elbow 90 63 mm 01717
Conical reduction
3 2 01993
90-75x63 mm
4 1 PVC elbow 90 75 mm 01718
Conical reduction
6 1 01997
110-90x75 mm
- - PVC Pipe 63 mm PN-6 02692
- - PVC Pipe 75 mm PN-6 02693
DRAINAGE
KEEP MINIMUM 100
ELECTRIC CONNEXION BOX:

must be installed in a dry area
Dimensions in mm
Minimum pit dimensions: 1200 x 1000 x 700 mm
155
Pumps
countercurrent swiming equipment: Marlin
Nozzle with polished S.S. AISI-316 rectangular faceplate

Composed of: Faceplate, nozzle, On/OFF switch and air regulation knob. Components in AISI-316 Stainless
Steel.
For housing in S.S. 11499 1 4.7 0.039
For housing in plastic 11014 1 4.1 0.039
Nozzle with white plastic round faceplate

Steel.
For housing in S.S. 11500 1 5.0 0.045
For housing in plastic 11016 1 4.4 0.056
Nozzle with white plastic rectangular faceplate

Steel.
For nozzle face plate in S.S. 11501 1 5.0 0.045
For nozzle face plate in plastic 11015 1 3.9 0.039
With white plastic rectangular faceplate and built-in hand grip

Steel.
For nozzle face plate in plastic 11013 1 4.2 0.039
Rectangular hand grips in painted AISI-316 S.S.

Specially designed for 11015 & 11501 nozzles. Nevertheless can be mounted on any of the other nozzle sets
except for the 11013.
09447 1 1.4 0.013
Rectangular hand grips in polished AISI-316 S.S.

Specially designed for 11014 and 11499 nozzles. Nevertheless can be mounted on any of the other nozzle sets
00246 1 1.48 0.01
156
Pumps
Round Hand grips in painted AISI-316 S.S.

Specially designed for 11016 & 11500 nozzles. Nevertheless can be mounted on any of the other nozzle sets
07536 1 1.6 0.02
PUMPS
Semi circular grab rail in polished AISI-316 S.S.
AISI-316 polished stainless steel. Specially indicated for Marlin counter current swimming kit models; Marlin
30 II, Marlin 30 III and Marlin 45 III, although it may be mounted on any of the inlet sets, except for model
11013.
37214 1 1.62 0.018
S.S. Housing
In Stainless Steel AISI-316. 240 mm in depth. Suitable for both, concrete and prefabricated pools. Supplied
with sealing elements and 3 m cable conduit.
00243 1 7.79 0.04
Accessories for mounting in fiberglass and liner pools

In AISI-316 Stainless Steel. With gaskets and screws.
00248 1 0.85 0.002
Housing
Made in unalterable plastic. Supplied with sealing elements and two conduits of 3 m each.
11502 1 5.0 0.036
Acccessory for fitting in liner and fiberglass pools

In plastic. With gaskets and screws.
11503 1 0.6 0.003
Massage hose
To be fitted on to the discharge nozzle. Length: 1.5 m.
00247 1 1.22 0.01
157
Pumps
Pumps
Made of plastic. Double insulation motor shaft. IP-54 motor protection.
1.5 kW power (P1: 2 HP)

Single-phase 230 V 50 Hz 11505 1 27 0.098
2.2 kW power (P1: 3 HP)
Single-phase 230 V 50 Hz 25415 1 29 0.098
2.60 kW power (P1: 3.5 HP)
Three-phase 230/400 V 50 Hz 11504 1 30.5 0.098
2CV II 3 CVII 3,5 CV III
20
18
16
14 Code HP A
3,5 CV III
12
11505 2 II 474
H (m.c.a.)
10
25415 3 II 475
8
2 CV II 3 CV II 11504 3.5 III 516
6
0
0 10 20 30 40 50 60
Q (m3/h)
Vertical discharge pump countercurrent equipment

Specially designed for countecurrent equipment with high performance output with larger diameter of dis-
charge and suction. It is important not to add any special features to the installation as they may limit the per-
formance significantly. All the pumps metal components in contact with water are manufactured in AISI-316
Stainless Steel, highly resistant to corrosion.
Power 1.5 Kw 2 HP Monoph., 230 V 50 Hz 28566 1 21.0 0.095
Power 2.2 Kw 3 HP Monoph., 230 v 50 Hz 28568 1 22.6 0.095
Power 2.2 Kw 3 HP Triph., 230/400 V 50 Hz 30774 1 22.5 0.095
20
18
16
14
12 Code HP A
H (m.c.a.)
3 CV
10
28566 2 II 496
8
6
28568 3 II 538
4
2 CV 30774 3 III 538
2
0
0 10 20 30 40 50 60
Q (m3/h)
Control boxes
Electro-pneumatic box. Pumps are operated through the nozzle faceplace buttons.
For 230 V II 1.5 kW (2 HP) pumps 11507 1 1.2 0.004

For 230 V II 2.2 kW (3 HP) pumps 25456 1 1.2 0.004
For 400 V III 2.2 Kw (3 HP) pumps 32151 1 1.2 0.004
For 230/400 V III 2.6 kW (3.5 HP) pumps 11506 1 1.2 0.004
158
Pumps
With white plastic rectangular faceplate and nozzles

Steel.
11508 1 7.0 0.065
PUMPS
Hand grip
In AISI-316 Stainless Steel. (2 units).
05557 1 1.9 0.01
Twin Housing
In AISI-316 Stainless Steel. 240 mm in depth. Suitable for both, concrete and prefabricated pools. Supplied
with sealing elements and two 3 m cable conduits.
05555 1 11.4 0.06
Accessory for mounting in prefabricated and liner pools

In AISI-316 Stainless Steel. With gaskets and screws.
05558 1 1.35 0.01
Pumps
Made of plastic. Double insulation motor shaft. IP-54 motor protection.
3.3 kW power (4.5 HP) 11509 1 32.5 0.098

230/400 V 50 Hz three-phase
20
18
16
14
12
H (m.c.a.)
10
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85
Q (m3/h)
Control box
Electro-pneumatic box. Pumps are operated through the nozzle faceplate buttons.
For 400 V III 3.3 Kw (4.5 HP) pumps 11510 1 1.2 0.004
159
Pumps
Countercurrent swimming equipment Marlin XS

New set nozzle Mini Eco counter current unit. Highly competitive in its hydraulic performance. It can be in-
stalled in both concrete and prefabricated pools. Manufactured in white plastic parts. Composes of front panel
nozzle set, stop/start push buttonand housing. Supplied with installation kit. Does not iclude pump or control
box.
Marlin XS 45618 1 1.553 0.015
AIRING
160
Pumps
The innovative design and concept supplied as a kit (including face plate, housing, control box and pump)
makes it an element which will add significant value to your pool. A highly competitive product thanks to its
high performance hydraulic features, the Marlin Countercurrent System is available in 3 models, the Marlin
30 II, the Marlin 30 III and the Marlin 45 III. Possibility of attaching grab rails and hydromassage hose.
PUMPS
Marlin 30 II (single-phase)
Consists of: Nozzle faceplate, plastic housing, control box and pump 2.2 kW (3 HP) 230 V II 50 Hz.
35375 1 37.4 0.260
Marlin 30 III (three-phase)

Consists of: Nozzle faceplate, plastic housing, control box and pump 2H2 kW (3 HP) 400 V III 50 Hz.
35376 1 37.4 0.260
Marlin 45 III (three-phase)

Consists of: Nozzle faceplate, plastic housing, control box and pump 3.3 kW (4.5 HP) 400 V III 50 Hz.
35377 1 42.2 0.260
Housing
Face plate
and nozzle
3
Pump
Control box
Accessories (not included in the kit)
Pos Q Denomination Code

1 1 PVC Ball valve 63 mm 02458
2 2 PVC elbow 90 63 mm 01717
3 2 Conical reduction 90-75x63 mm 01993
4 1 PVC elbow 90 75 mm 01718
5 1 PVC Ball valve 75 mm 02459
6 1 Conical reduction 110-90x75 mm 01997
- - PVC pipe 63 mm PN-6 02692
- - PVC pipe 75 mm PN-6 02693
161
Pumps
Submersible pumps
Air pump
Air pump designed for spas, baths, hydromassage installations and similar which produces a constant stream
of air bubbles at medium and high air volume levels. It can also be used to stir up the filter bed, for example
in back wash cycles where a low intensity air current is required. The filter casing and impeller are made from
an injected aluminium alloy whilst the motor spindle is manufactured from stainless steel, with the impeller
dynamically balanced and directly adapted to the spindle. The motors, single phase or 3 phase for continuous
use, are made from steel in compliance with CEI 2/3 1988 regulations, and feature IP54 external protec-
tion and class-F insulation. The standard voltages are100-120/200-240V for the monophase range and 200-
240/380-440V for the triphase models, at 50/60Hz. The pumps can be mounted horizontally or vertically.
Moreover, since there is no contact between the mobile parts and the pump static discharges, neither lubrica-
tion nor maintenance is necessary and is also doesnt cause wear on the parts. The turbines have a maximum
working temperature of 40C. Do not use in conjunction with aggressive, inflammable or explosive gases.
Please consult for technical variations.
Max.
Frequency Standard Standard
Model Code Electrical supply (V) Phase Flow (m3/h) Pressure
(Hz) Weight kg Volume m3
(mbar)
Blower 0.4 kW 50 200-240 Y 345-415 3 80 130

33970 10 0.045
Blower 0.5 kW 60 220-275 Y 380-480 3 98 170
Blower 0.85 kW 50 200-240 1 145 160
35387 17 0.045
Blower 0.95 kW 60 200-240 1 175 160
Blower 0.85 kW 50 200-240 Y 345-415 3 145 160
35388 16 0.059
Blower 0.95 kW 60 220-275 Y 380-480 3 175 160
Blower 1.3 kW 50 200-240 1 210 170
31090 23 0.059
Blower 1.5 kW 60 200-240 1 255 140
Blower 1.3 kW 50 200-240 Y 345-415 3 210 170
31091 22 0.059
Blower 1.5 kW 60 220-275 Y 380-480 3 255 140
Blower 1.5 kW 50 200-240 1 210 220
33971 24 0.064
Blower 1.75 kW 60 200-240 1 255 220
Blower 1.6 kW 50 200-240 Y 345-415 3 210 220
31092 23 0.064
Blower 2.1 kW 60 220-275 Y 380-480 3 255 220
Blower 1.6 kW 2V 50 200-240 Y 345-415 3 150 300
35389 25 0.087
Blower 2.06 kW 2V 60 220-275 Y 380-480 3 180 310
Blower 2.2 kW 50 200-240 Y 345-415 3 318 230
31093 30 0.097
Blower 2.55 kW 60 220-275 Y 380-480 3 376 220
Blower 3.0 kW 2V 50 200-240 Y 345-415 3 230 410
31094 40 0.126
Blower 3.45 kW 2V 60 220-275 Y 380-480 3 275 400
Blower 3.0 kW 50 200-240 Y 345-415 3 318 280
31095 36 0.097
Blower 3.45 kW 60 220-275 Y 380-480 3 376 280
Blower 4.3 kW 2V 50 345-415 Y 600-720 3 520 600
31096 54 0.217
Blower 4.8 kW 2V 60 380-480 Y 660-720 3 385 320
Blower 5.5 kW 50 345-415 Y 600-720 3 530 320
31097 63 0.16
Blower 6.3 kW 60 380-480 Y 660-720 3 620 340
Blower 5.5 kW 2V 50 345-415 Y 600-720 3 320 515
33972 66 0.201
Blower 6.3 kW 2V 60 380-480 Y 660-720 3 385 530
Blower 7.5 kW 50 345-415 Y 600-720 3 530 400
31098 66 0.16
Blower 8.6 kW 60 380-480 Y 660-720 3 620 400
Blower 11 kW 2V 50 345-415 Y 600-720 3 520 600
33973 104 0.353
Blower 12.6 kW 2V 60 380-480 Y 660-720 3 620 600
Blower 12.5 kW 50 345-415 Y 600-720 3 1050 270
33974 116 0.353
Blower 14.5 kW 60 380-480 Y 660-720 3 1250 260
162
Water treatment
Water treatment
treatment
Water
165 Chlorine disinfectants and non comburent chlorine
166 Chlorine multi-action disinfectants
169 Bromine Disinfection
169 Disinfection with active Oxygen (free from Chlorine)
170 Algicide
171 Flocculants
172 Cleaners
173 Winter care products
174 Complements
176 Products for Salt electrolysis
177 Products for Salt chlorinators
178 Water test kits
180 Pocket gauges
181 Test kits and photometers
163
Water treatment
pH regulators
Solid pH Minor
Solid state pH reducer. For adjusting pH between 7.2 and 7.6.
1.5 kg 11384 12 20.5 0.032

8 kg 11385 4 34.1 0.053
16 kg 16540 2 34.1 0.050
40 kg 11974 1 41.2 0.040
Special for liner pools 1.5 kg 24607 12 20.5 0.032
Special for liner pools 8 kg 24608 4 33.5 0.047
Solid pH Plus
pH enhancer in solid state. For adjusting pH between 7.2 and 7.6.
1 kg 16538 12 20.5 0.032

6 kg 11386 4 26.1 0.053
12 kg 16539 2 26.2 0.050
35 kg 15975 1 36.3 0.047
Liquid pH Minor
Liquid pH reducer. Ideal for pump dosage.
10 l 43290 1 - -
25 l 16541 1 33.7 0.028
Liquid pH Plus
Liquid pH enhancer. Ideal for pump dosage.
25 l 16542 1 33.5 0.028
Alkalinity enhancer
In powder form for increasing pool water alkalinity when it falls below 125 ppm.
6 kg 15976 4 26.1 0.053

40 kg 19933 1 41.0 0.062
164
Water treatment
Chlorine disinfectants and non comburent chlorine
Non comburent Chlorine. Trichloroisocyanuric and multi-action tablets and blocks similar to the traditional
ones but in NON COMBURENT version. According to the existing regulation, the non comburent products
have a lower hazardous level than the comburent chlorinated products. For this reason, it does not have any
storage limitations (379/2001 and Seveso II Standards) and less transport regulations apply.
Granulate Dicloroiscyanuric Acid 55%

Dichloriscyanuric acid granules with 55% available Chlorine. Non comburent.
treatment
1 kg 11393 12 14.5 0.032
Water
5 kg 11394 4 22.1 0.053
10 kg 16478 2 22.2 0.042
30 kg 11395 1 31.4 0.047
50 kg 11396 1 52.7 0.060
5 kg 24612 4 22.1 0.053
Trichloroisocyanuric acid powder

Trichloroisocyanuric acid powder with 90% available Chlorine.
1 kg 11400 12 14.5 0.032

5 kg 11401 4 22.1 0.053
12 kg 19706 2 20.5 0.058
30 kg 11402 1 31.4 0.047
50 kg 11403 1 52.7 0.068
Trichloroisocyanuric acid granules

Trichloroisocyanuric acid granules with 90% available Chlorine.
1 kg 11404 12 14.5 0.032

5 kg 11405 4 22.1 0.053
12 kg 16548 2 26.2 0.050
30 kg 11406 1 31.4 0.047
50 kg 11407 1 52.7 0.068
Fast action Chlorine tablets

20 g Trichloroisocyanuric acid tablets with 50% available Chlorine. Non comburent.
1 kg 11397 12 14.5 0.032

5 kg 11398 4 22.1 0.053
10 kg 16547 2 22.2 0.042
25 kg 11399 1 26.4 0.047
Hypocal granules
Calcium hypochlorite granules with 70% of available Chlorine.
1 kg 15980 12 13.4 0.027

5 kg 15981 4 22.1 0.049
25 kg 15982 1 26.4 0.047
165
Water treatment
CHLORINE DISINFECTANTS AND NON COMBURENT CHLORINE
200 gr Trichlor tablets

Trichloroisocyanuric acid compact slow dissolving 200 gr tablets with 90% available chlorine. Packs of 5
tablets. (NON COMBURENT).
1 kg 25309 12 14.5 0.032
5 kg 25310 4 22.1 0.053
12 kg 25311 2 26.2 0.050
25 kg 25312 1 26.2 0.047
50 kg 25313 1 52.7 0.068
250 gr Trichlorine tablets

A NON COMBURENT solid which dissolves slowly, highly stabilized for disinfection and maintenance of crystal-
line and hygienically pure water.
1 Kg 34433 12 14.5 0.032
5 Kg 34434 4 22.1 0.053
25 Kg 34436 1 26.2 0.047
Trichloroisocyanuric acid compact 500

Trichloroisocyanuric acid compact, slow dissolving, 500 gr block, in individual package, having 90% of avail-
able chlorine. Non comburent.
25315
12 6.9 0.010
Chlorine multi-action disinfectants
Action 10
New 200 gr multi-functional tablets carrying out the following 10 functions: Disinfection, algicide, germicide,
algistatic, viruscide, fungicide, flocculant-coagulant, pH reduction, stabilizer and antiscaler. Non combu-
rent.
5 kg 25322 4 22.1 0.053
10 kg 25323 2 22.2 0.042
Multi-action block
Slow dissolving 500 gr block, having algicide, bactericide and flocculant effect. In individual film Packaging.
Non comburent.
5 kg 25316 4 22.1 0.053
25 kg 25355 1 26.4 0.047
Duralong
An integral pool water treatment with triple action of bactericide, algicide and flocculant. Includes floating
dispenser. Non comburent.
2 kg 16563 6 13.4 0.049
166
Water treatment
Chlorine multi-action disinfectants
Granular Multi-action disinfectant

Granular product with bactericide, algicide and flocculent effect.
1 kg 15983 12 14.5 0.032

5 kg 15984 4 22.1 0.053
30 kg 15985 1 31.4 0.047
Multi-action tablet 200
treatment
Slow dissolving 200 gr tablets, with bactericide, algicide and flocculent effect. Non comburent.
Water
1 kg 25319 12 14.5 0.032

5 kg 25320 4 22.1 0.053
25 kg 25321 1 26.2 0.040
Multi-action DC 200 tablet (cartridge and DE filters)

This is a "multi-action" product especially formulated for the treatment of swimming pool water with cartridge
or DE filters. It avoids the danger of filter clogging. 200 g tablets, contains bactericide, algicide and flocculant.
5 kg 28736 4 22.1 0.053
Multi-purpose tablet for hard water

A solid compound in tablets which is specially formulated to eliminate bacteria, viruses and micro organisms
in general from the pool water with a single application; prevents the development of algae; keeps water trans-
parent and crystal clear and prevents lime incrustations.
1 kg 40935 12 14.5 0.032

5 kg 40936 4 22.1 0.053
10 kg 40937 2 22.2 0.042
25 kg 40938 1 26.2 0.047
250 gr Multi-action tablets

A NON COMBURENT solid compound in tablets which is specially formulated to eliminate bacteria, viruses and
micro organisms in general from the pool water with a single application; prevents the development of algae and
keeps water transparent and crystal clear.
1 kg 34438 12 14.5 0.032

5 kg 34439 4 22.1 0.053
25 kg 34440 1 26.2 0.047
50 kg 34441 1 52.7 0.068
Cartridge Filter Triplex-20

A solid compound in 20 gr. tablets which is specially formulated to eliminate bacteria, viruses and micro organ-
isms in general from the pool water with a single application; prevents the development of algae and keeps the
water transparent and crystal clear.
1 kg 41075 12 14.5 0.032
5 kg 41076 4 22.1 0.053
10 kg 41077 2 22.2 0.042
25 kg 41078 1 26.2 0.047
167
Water treatment
AstralPool presents its new labelling for its chemical products:

Image overhaul
Iconic representation
Differentiation by color.
An easy and convenient way of identifying ourselves
New label Icon description

Product type
Type of Standard image
product for chemicals
label pH Br
Compuesto slido en tabletas de 200 g. especialmente formulado para PRECAUCIONES
Regulator Disinfectant Cleaner
que con su sola aplicacin en el agua de la piscina, se consiga eliminar R 22 Nocivo por ingestin. R31 En contacto con cidos libera gases
Presentation
las bacterias, virus y microorganismos en general, evitar el desarrollo txicos. R 36/37 Irrita los ojos y las vas respiratorias. R 50/53 Muy
de las algas y mantener el agua transparente y cristalina. txico para los organismos acuticos, puede provocar a largo plazo
Invernador DOSIFICACION Y MODO DE EMPLEO efectos negativos en el medio ambiente acutico. S 2 Mantngase
- TRATAMIENTO INICIAL (supercloracin): Adicionar 15 gramos fuera del alcance de los nios. S 8 Mantngase el recipiente bien
format
de DICLORO GRANULADO por cada m de agua. Transcurridas cerrado en lugar seco. S13 Mantngase lejos de alimentos, bebidas y
2 horas, ajustar el pH del agua entre 7,2-7,6 empleando pH MINOR o piensos. S 26 En caso de contacto con los ojos, lvense inmediata y
pH PLUS. abundantemente con agua y acdase a un mdico. S 35 Elimnense los
O2
- TRATAMIENTO DE MANTENIMIENTO: Con el pH del agua ajustado, residuos del producto y sus recipientes con todas las precauciones
Lquido aadir a razn de 1 MULTI-ACTION TABLETA 200 por cada 20 m de

agua cada 7 o 10 das.
Estas dosis son de carcter orientativo, y pueden ser modificadas en
funcin de las caractersticas de la piscina, su uso, climatologa, etc. El
posibles. S 37/39 sense guantes adecuados y proteccin para los
ojos/la cara. S 41 En caso de incendio y/o explosin, no respire los
humos. S 45 En caso de accidente o malestar, acuda inmediatamente
al mdico, (si es posible, mustrele la etiqueta).
pH
tratamiento inicial deber repetirse siempre que se aprecie una falta de ATENCIN: No mezclar con otros productos, puedes desprenderse
transparencia en el agua. gases peligrosos (cloro).
Piscina
Introducir la dosis necesaria de MULTI-ACTION TABLETA 200 en el
interior de los skimmers. A continuacin poner en funcionamiento el COMPOSICION: Sincloseno 92% y Sales Metlicas Hidrosolubles 3,5%.
Regulator Disinfectant Complement
equipo de filtracin para que disuelva el producto al N CEE: 201-782-8
circular el agua a travs de dichos skimmers.
Application Es indispensable que todo el volumen de agua de la piscina sea

recirculado diariamente a travs del equipo depurador. El cloro residual
libre deber situarse entre 0,5 - 2 mg/l. Este control se realizar
fcilmente utilizando el estuche analizador de cloro y pH, con una
EN CASO DE INTOXICACIN, LLAMAR AL SERVICIO DE
INFORMACIN TOXICOLGICA TEL. (91) 562.04.20
*Producto Homologado por la DGSP con el N. 06-60/70-1735*
frecuencia de 2 veces al da como mnimo. DEBE EVITARSE EL CONTACTO PROLONGADO DE ESTE

PRODUCTO SOBRE LAS SUPERFICIES DEL VASO, EN
Manufactured by C.I.F.: A-08822314 for ASTRAL POOL, S.A.U. PISCINAS FABRICADAS CON POLIESTER, LINER, VINILO
Alk
Avda. Francesc Maci, 38, 15 planta O PINTADAS. ESTE PRODUCTO LAS DECOLORA.
Tel.+34 93 713 63 44 Fax 93 713 63 45 www.astralpool.com
Regulator Algicide Winterizing

invernador
COD. 25320
EC LABEL
Xn: NOCIVO N: PELIGROSO PARA
EL MEDIO AMBIENTE
5L
Lquido www.astralpool.com
8 420382 253207
Cl
Disinfectant Flocculant
Product Subname Capacity

families (description) Cl+
Multi-action
Presentation
Product families by colour format Application
Invernador Disinfection Invernador Regulators Dust Cartridge Pool Sand filter
Lquido Multi-action Lquido
Piscina Piscina
Granules Block Liner pools Covered pool
invernador invernador
5L 5L
Lquido Lquido
Na Cl
Tablet Salt electrolysis Diatomaceous and
cartridge filter
Invernador Algicides Invernador Cleaners

Lquido Lquido Flocculants Liquid Spa
Piscina Piscina
Complements
invernador invernador Gel Fibre and PE pools
5L 5L
Lquido Lquido
NOTE
The change of labelling on AstralPool's chemical products will be progressively introduced in 2010, as a result of which the new labels may overlap with the old
ones for a certain period.
AstralPool guarantees that each of its products contains exactly the same as before, regardless of the labelling.
168
Water treatment
Bromine Disinfection
Bromine tablets
Slow dissolving 20 g Bromine tablets for pool and spa continuous disinfection without chlorine smell. High
tolerance of pH value. Large disinfectant and oxidising capacity.
5 kg 16550 5 27.1 0.076

20 kg 28740 1 24.0 0.027
treatment
Water
Disinfection with active Oxygen (free from Chlorine)
Oxy-Active Liquid
A fully combined product based on Active Oxygen for disinfecting residential pools without the use of Chlorine
maintaining it at the same time free from algae and cloudiness. Can be used manually or also automatically
using a dosage pump.
5 l 18714 4 24.1 0.033
Oxy-Active tablets
100 gr Oxygen activated tablets for continuous disinfection of residential pools. Chlorine Free.
1 kg 15978 12 14.5 0.032

6 kg 15979 4 26.1 0.053
Microbid
Specially developed algicide for complementing Oxy-active tablet effect. Non-foam forming and micro-floccu-
lent.
5l 15991 4 24.1 0.033
Oximines
Non-Chlorine shock treatment granules for Chloramines elimination. Allows bathing after 15 minutes of the
shock treatment.
5 kg 11433 4 22.1 0.053

30 kg 11434 1 31.4 0.047
169
Water treatment
Algicide
Algicide
Prevents algae forming in the pool.
1l 11416 12 13.5 0.023
5l 11417 4 21.6 0.033
25 l 11418 1 26.3 0.028
Algicide with brightener

High bactericide, algicide and flocculent effect.
1l 11413 12 13.6 0.023
5l 11414 4 21.5 0.033
25 l 11415 1 26.5 0.028
Concentrated algicide
Prevents algae formation and growth.
1l 11419 12 13.5 0.023
5 l 11420 4 21.6 0.033
25 l 11421 1 26.3 0.028
Extra algicide
Very effective non-foaming algicide with flocculent action incorporated.
1 l 11422 12 13.8 0.025

5 l 11423 4 21.2 0.033
25 l 11424 1 27.1 0.028
Special for liner pools 1 l 24615 12 13.8 0.025
5 l 24616 4 21.2 0.033
Indoor pool algicide

Non-foaming double-action liquid used to treat private and/or public indoor heated pool water. Formulated to
prevent and eliminate algae, as well as reduce and eliminate bad odours caused by the chlorine when mixing
with the nitrogenated organic material present in pool water. Chlorine or activated Oxygen act as activating
agents, thus reducing the chloramines from the water and therefore, the unpleasant chlorine odour and eye
irritation.
1l 41079 12 13.6 0.023

5l 41080 4 21.2 0.033
25 l 41081 1 27.1 0.028
170
Water treatment
Flocculants
Liquid flocculant
Clarifies the water eliminating colloidal particles causing water cloudiness.
1 l 11387 12 15.8 0.023

5 l 11388 4 25.4 0.033
25 l 11389 1 31.3 0.028
5 l 24618 4 25.4 0.033
treatment
Water
Solid flocculant
Promotes continuous water clarity obtained by a permanent flocculent action.
1 kg of product in 10 bags 11390 12 13.1 0.019

(sacks with 100 gr)
1 kg of product in 10 100 gr cartridges 18847 14 19.4 0.044
(cartridges with three 33.3 gr tablets)
Double effect water clarifier, in cartridges

Intelligent product: Combines quick flocculation with continuous clarifying action. As a result, a better disin-
fection and crystalline water.
1 kg 18725 14 19.4 0.044
Claritab Plus
New highly concentrated double action coagulant and flocculant tablets. They are specially designed for
obtaining a more efficient sand filter effect. Its slow dissolving and controlled action eliminates thoroughly
suspended particles in water (metallic icon, organic matter, etc.). Savings are obtained as disinfection chemi-
cals are reduced.
Blisters including 2 tubes of
5 tablets of 20 gr each 25324 24 6 0.020
171
Water treatment
Cleaners
Extra descaler
Extra strong cleaning agent. Acid.
5 l 11391 4 23.2 0.033

25 l 11392 1 29.2 0.028
Waterline border degreaser "Non foam forming"

Special combined formula to eliminate grease and dirt from pool walls and water lines.
1 l 11425 12 14.3 0.023

5 l 11426 4 22.8 0.033
25 l 11427 1 28.1 0.028
Special cleaner for polyester and fibreglass pools

Specially designed for eliminating lime scaling and grease without damaging the pool lining.
5 l 16558 4 25.5 0.033
Gelamin
Pool walls and floor de-scaling gel. Very efficient and easy application.
5 l 15987 4 22.8 0.033

Lime scale remover gel specially made for the water line
Powerful liquid lime scale remover to clean the water line with degreasing ability.
1 l 40931 12 - -
5 l 40932 4 - -
25 l 40934 1 - -
Liquid Filnet
Liquid descaler designed specially for the inside cleaning of public pool sand filters.
5 l 16498 4 24.4 0.025

25 l 16499 1 30.0 0.026
172
Water treatment
Cleaners
Solid Filnet
Solid descaler for the inside cleaning of sand filters.
1.5 kg 15988 12 20.5 0.032
S.S. Polish-cleaner
treatment
Stain remover and degreaser for cleaning all types of Stainless Steel surfaces.
Water
1 l 18713 12 13.8 0.023

5 l 16630 2 22.0 0.034
Winter care products
Winterizing product
Prevents intense proliferation of algae and bacteria in the pool water. Prevents water from putrefaction and
calcareous formation. Facilitates spring cleaning and is non-foam forming.
1 l 18723 12 13.8 0.023

5 l 11430 4 24.4 0.033
Winterizing product "without Copper"

Prevents water putrefaction and algae and bacteria multiplication. Compatible with any water treatment sys-
tem, including PHMB system.
5 l 16553 4 24.4 0.033
Inverlong
Complete winter treatment. Prevents water putrefaction and algae and bacteria multiplication. Maintains pool
water clear and includes bactericide, algicide and flocculent action. Floating dispenser is supplied.
16554
6 13.4 0.049
173
Water treatment
Complements
Kit-Splash
Childrens pool kit. Contains: 0.5 kg granulated Dichloroisocyanuric Acid & 0.5 l concentrated algicide.
15986
14 17.5 0.044
Liner repair kit

20 ml glue tube and 2 liner strips. Transparent (PVC).
24624
50 0.07 0.02
Chlorine stabiliser
Prevents UV sun rays from destroying quickly excess of Chlorine.
1 kg 16556 12 12.8 0.090

5 kg 16495 4 22.1 0.053
25 kg 19935 1 25.3 0.056
Chlorine and Bromine neutraliser

Eliminates excess of free residual Chlorine and Bromine.
6 kg 16578 4 26.1 0.053
Super descaler
Highly efficient descaler. Prevents lime scale and pipe lining.
5 l 16555 4 28.5 0.033

Descaler
Prevents lime scaling.
5 l 11431 4 28.5 0.033
174
Water treatment
Complements
Solid pH Minor for salt electrolysis

1.5 Kg 40918 12 20.5 0.032
8 Kg 40919 4 34.1 0.053
16 Kg 40920 1 34.1 0.050
Liquid pH Minor for salt electrolysis
treatment
Water
5 l 40921 4 24.1 0.033
10 l 40922 1 12.2 0.012
25 l 40923 1 33.5 0.027
100 gr salt electrolysis cartridge flocculant

A coagulating and flocculant action product which eliminates suspended particles with a single application,
thus improving the transparency of pool water. Its special formula also prevents the formation of calcareous
deposits (lime); even preventing the calcification of filters and corrosion of metallic parts of the recirculation
and filtration system.
1 Kg 40924 - 14 0.036
Salt electrolysis algicide and anti-caleareous

Non-foaming, quick action algicide compound for the prevention and removal of algae. Its special formula also
prevents the formation of calcareous deposits (lime); even preventing the calcification of the filters and corro-
sion of the metal parts of the recirculation and filtration system.
1 l 40925 12 12 0.025
5 l 40926 4 20 0.034
25 l 40927 1 25 0.027
Brom Gen
Bromine Generator is a granulated inorganic compound that permits the transformation of the active chlorine
generated by the electrolysis treatment of salt into Bromine to disinfect and keep the water clean and hygieni-
cally pure.
5 Kg 40928 4 20 0.049
Netcel. Electrolyte Chlorinator cell cleaner

Acid cleaner, ready to use. Eliminates calcium deposits, organic residue and sediment build-up on salt chlo-
rinator cells, without causing them any damage. Risk-free due to the lack of concentrated acid products, thus
avoiding potential accidents. This product is designed for both professionals and private pool owners.
1 l 28729 12 13.5 0.023

5 l 28730 4 21.6 0.033
175
Water treatment
Products for Salt electrolysis
New
Mineral Pools
Feel the waters caress
Directions Mineralpools is a mineral enriched salt that

delivers two benefits in a single product:
1. Before adding Mineralpools, 1. It takes care of your pools disinfection
adjust the total alkalinity to 80 2. It takes care of your body and soul
ppm and the pH to 7.4
What therapeutic properties will the minerals deliver?
2. Add 40 kg of Mineralpools for
every 10,000 litres of water
Mineralpools will enable you to enjoy an
Whilst the pump and the all-round relaxing and healthy treatment.
filter are running, pour the 1. Softens the skin and hair
content of Mineralpools
around the edge of your
2. Eliminates stress
pool. 3. Relaxes the muscles
4. Relieves tension in the body
Continue filtering the water 5. Prevents the burning and stinging of chlorine
for at least 4 hours after
6. Delivers a completely odourless treatment
adding Mineralpools.
Check the total alkalinity Can it be used in any pool?

and the pH level, and adjust
if necessary. Mineralpools is suitable for use in most salt chlorinators.
1. It dissolves easily in water
2. It helps prevent staining
3. It helps prevent the build-up of lime scale on the various pieces of equipment in your pool:
chlorinator cells, heaters and stainless steel components

Further information at
www.mineralpools.com Mineralpools - 10 kg 60315 1 10 -
176
Water treatment
Products for Salt chlorinators
3 in 1 test strips
Quick and easy testing for free Chlorine, PH and alakalinity. Contains 50 strips.
41925
10 0.6 0.005
6 in 1 test strips
Quick and easy testing for free chlorine, PH, alakalinity, bromine, hardness and Cyanide acid. Contains 50 strips.
treatment
Water


45198 10 0.6 0.005
ECO comparison kit (in Blister) Total Chlorine/Bromine and pH

Includes liquid Otto and Phenol.
25684
40 3.3 0.022
ECO chlorine/bromine and pH test kit (blister pack)

With DPD Phenol and tablets.
26156
40 3.3 0.022
Reagent refills
1 OTO and 1 Phenol refill per pack.
38638 144 8 0.037

New
Basic pH and chlorine test kit
With liquid OTO and Phenol.
38637
48 8 0.054
Total chlorine/bromine and pH test kit

Modern and practical design. Presented in a blue plastic box with liquid OTO and Phenol.
25353
25 4.8 0.019
Comparison kit Total Chlorine/Bromine and pH

Modern and practical design. Presented in a blue plastic box with Oto and Phenol liquid.
25354
25 4.8 0.019
177
Water treatment
Water test kits
Residual chlorine/cromine and pH test kits

Modern and practical design. Presented in a blue plastic box with Phenol and DPD tablets.
26155
25 4.8 0.019
Oxy-Active Liquid analyser

For measuring residual Oxy-Active Liquid in water.
26082
1 15.4 0.0265
Reagent refills

Oto refill 15 cm3 28050 50 2.1 0.020
Phenol refill 15 cm3 28051 50 2.1 0.020
Oto refill 250 cm3 16623 20 5.5 0.010
Phenol refill 250 cm3 16624 20 5.5 0.010
Oto and Phenol refill
of each 15 cm3 16610 50 3.5 0.020

Pooltester for free Chlorine and pH

Chlorine range: 0.1- 3.0 mg/l
pH range: 6.8 - 8.2 03253 12 2.2 0.007
Chlorine range: 0.5- 6.0 mg/l

pH escala: 6.8 - 8.2 01419 12 2.2 0.007
Pooltester for oxygen and pH

03182
12 2.2 0.007
Pooltester for Bromine and pH

16374
12 2.2 0.007
Copper testing kit

03258
1 0.2 0.004
178
Water treatment
Water test kits
Pooltester refill blister pack

20 tablets of DPD1 and 20 tablets of Phenol red.
18854
30 1.4 0.010
Reagent tablets
treatment
Water
Phenol (pH) reagent tablets 250 uni. 01426 1 0.1 0.004
DPD 1 reagent tablets 250 uni. 01424 1 0.1 0.004
MPS-OUT reagent tablets 250 uni. 08677 1 0.1 0.004
(for determining the amount of
Chlorine in the presence of Oximines)
New
3 in 1 test strips: MPS
Potassium monopersulphate, pH and total alkalinity test strips. 50 strips per pack.
54468
- - -
New
4 in 1 test strips: free chlorine
Quick and easy test for total free chlorine, pH and alkalinity in pools treated with chlorine. 50 strips per pack.
54466
- - - -
New
4 in 1 test strips: bromine
Quick and easy test for total bromine, pH and alkalinity in pools treated with bromine.50 strips per pack.
54467
- - - -
New
Salt test strips
Test kit for measuring salt levels. Tests should be conducted regularly whenever pool water is changed.
07937
- - - -
New
TruTrest test strips
3 in 1 test strips for testing total free chlorine/bromine, pH and alkalinity. 50 strips per pack.
40817
- - -
179
Water treatment
Water test kits
New
Digital test strip reader
Digital test strip reader for measuring total free chlorine/bromine, pH and alkalinity. It combines the simplicity
and accuracy of test strips with advanced digital technology. You will no longer have to guess the exact results
of test strips. Just wet a test strip in your pool or spa water, put it in the reader and you will obtain fast, ac-
curate results.
38813
- - -
New
TruTest starter kit
Includes:
1 display rack and banner for your point of sale.
6 digital test strip readers.
6 packs of TruTest digital test strips.
41653
- - -
Pocket gauges
Pocket dissolved solids photometer

A small, practical and portable photometer for easy measurement of the quality of dissolved solids and tem-
perature of swimming pool water. Especially suitable for measuring salt (NaCl (sodium chloride)) content in
water in swimming pools fitted with a salt electrolysis unit.
41928
1 - -
Pocket Redox photometer

A small, practical and portable photometer for easy measurement of the potential Redox level of swimming pool
water.
28583
1 - -
Pocket pH Photometer
A small, practical and portable photometer for easy measurement of the PH of swimming pools.
43447
1 - -
Conductivity meter
A small, practical and portable meter for easy measurement of conductivity.
Range: 0.1 - 19.9 mS/cm. 43428 1 - -
180
Water treatment
Test kits and photometers
3 in 1 Photometer
3 in 1 Photometer:
Chlorine range: 0.01 - 5.0 mg/l
Cyanide acid range: 2 - 200 mg/l
pH: 6.8 - 8.4
47189
1 1.0 0.049
treatment
Water
6 in 1 Photometer
6 in 1 Photometer:
Cyanide acid range: 2 - 200 mg/l
pH: 6.8 - 8.4
Calcium Hardness range: 5 - 500 mg/l
Bromine range: 0.01 - 5.0 mg/l
Alkalinity range: 10 - 500 mg/l
47190
1 1.0 0.049
3 in 1 Photometer PC Checkit
hlorine range: 0.05 - 6.0 mg/l
pH range: 6.5 - 8.4
Cyanide acid range: 0 - 80.0 mg/l
54567
1 1.0 0.049
5 in 1 Photometer PC Checkit
pH range: 6.5 - 8.4
Cyanide acid range: 0 - 80.0 mg/l
Alkalinity range: 5 - 200 mg/l
Calcium hardness range: 50 - 500 mg/l
54568
1 1.0 0.049
Photometer reagent

Phenol (pH) reagent tablets 250 uni. 03019 1 0.1 0.004

Code 03009 DPD 1 reagent tablets 250 uni. 03009 1 0.1 0.004
MPS-OUT reagent tablets 250 uni. 08679 1 0.1 0.004
(for determining the amount of
Chlorine in the presence of Oximines)
Isocyanuric acid
reagent tablets 250 uni. 08345 1 0.1 0.004
Other reagents Consultar
181
Water treatment
New
WaterLink Lab
WaterLink Lab is a new, revolutionary water testing laboratory that will enable you to conduct tests in under 60
seconds. Using this innovative professional photometer, you will be able to test up to 10 parameters using the
same sample in a single reading.
By inserting the water sample in the reagent disk, the WaterLink reader will automatically transfer all of the
latest available information.
The DataMate software brings out the best of the infinite possibilities this program offers:
Benefits Detailed readings of the test results.
Recommended treatments based on the results.
Quick and efficient:
Recommended dosages of chemicals.
Tests 10 parameters in All test results and recommendations you give to your customers will come back with their details by simply
just 60 seconds.
entering your company's logo and details.
Convenient:
Works using a disk, so no Besides the major breakthrough made by the WaterLink Lab device, you will be able to enjoy the advantages of
more handling of reagents having DataMate, a software program designed for managing all tests conducted and the product recommenda-
is needed. tions followed. Exclusive, customised treatment for users and owners of pools and spas.
Accurate:
Remind all customers to review the test log file and recommendations, as well as to download the database.
Detailed readings of the
test results. One customer one file exceptional treatment
Customised recommendations:
Gives information on the
recommended treatment and Three simple steps
product dosage.
By following three simple steps you will be able to perform more accurate and reliable water tests than ever
before. Forget all about the bother of measuring methods using reagents and dispense with inaccurate test
strips. And all this in just 60 seconds!
1 Insert the water sample in the disk
2 Place the disk in the reader
3 Click on "start test"
Test Factor Reading range #Test
Free chlorine (DPD) 0-15.0 ppm 100
Total chlorine (DPD) 0-15.0 ppm 100
Bromine (DPD) 0-33.0 ppm 100
pH 6.3-8.6 pH 100
Calcium hardness 0-1200 ppm 100
Total alkalinity 0-250 ppm 100
Cyanuric acid 5-150 ppm 100
Copper 0-3.0 ppm 100

Iron 0-3.0 ppm 100
The disks come in boxes of 50 units.

Each disk is for a single test only and may not be reused.
Shelf life of 2 years.
182
Water treatment
New
WaterLink Lab
DataMate Software
Log file of readings
Results sent directly from WaterLink Lab
Easily customised by retailers
The DataMate software is user-friendly and compatible with Windows operating systems. It is a program for
managing water tests that recommends customised treatment for each pool or spa tested. The recommenda-
tions are listed in the order and in the dosages in which treatments should be used for best results. Clear,
precise explanations are given so they are easy to understand. The information can be viewed directly on a
treatment
computer, printed out or emailed to customers. The program is easy to customise to meet your changing needs
Water
year after year.
Software requirements
Compatible operating systems: Microsoft Windows 7; Windows Server 2003 Service Pack 2; Windows
Vista Service Pack 1; Windows XP, Service Pack 3. Pre-requisites: Windows Installer 4.5 or later; Internet
Explorer 5.01 or later (1).
Hardware requirements
Recommended minimum: 3 GHz Intel Pentium IV (2), Core 2 processor or higher with 1 GB of RAM or
more. Minimum disk space: x86 (32 bit) 850 MB x64 (64 bit) 2 GB. High speed USB 2.0 port.
Touch screen
The program's unique touch screen capability allows users to go from screen to screen by pressing the buttons
or tabs on the screen with their finger. If your computer does not have touch screen capability, just use your
mouse.
Customisation
DataMate is able to customise the information given by using your retailers' details (logo, contact details etc).
The reports will therefore be customised, which will give you a better image and a competitive edge.
Link
The DataMate software accepts test results from the WaterLink reader through a USB connector Results can be
manually typed into the software for salt, phosphates, nitrates or TDS levels. Use the check boxes for certain
water conditions, such as water colour, stains, cloudiness and foam, or for highlighting products such as the
enzyme cleaner, filter cleaner or surface cleaner needed to remedy problems.
Database
The program allows unlimited pool and spa tests to be stored in customers files for easy access and refer-
ence. In addition, the database can sort information, generate reports, graphs of specific test factor trends,
print labels and send email blasts for promotional mailings. All printed recommendations feature the dealers
store information name, address, phone and fax numbers, and website as well as a section for advertising
monthly sales or other relevant information for specific customers.
The DataMate software is available in Spanish, English, French, Italian and Portuguese.

Lector Water Link + Software + 100 disks 60312 1 - -
Spin Chlorine Disk (50 units) 60313 1 - -
(1) Windows, Windows XP, Windows Vista, Windows 7, Internet Explorer, Windows Server and SQL Server, Microsoft .NET,
Microsoft Excel and Microsoft Access are registered trademarks of Microsoft.
(2) Pentium is a registered trademark of the Intel Corporation in the US and other countries.
183
Water treatment
Pool-control-direct
Multi-parameter Photometer that permits executing a wide range of analysis covering all the water require-
ments. It replaces the photometer PC-12 (08675) by offering internal and external improvements, a wide
graphic display and an interface RS232. It is aimed at professionals of the sewage, potable, industrial and pool
water sectors.
28344
1 1.9 0.023
The reagents required for analysing the following parameters are available on request:
Cyanide acid 0 160 ppm Cys Copper 0 5 ppm Cu

Total-Alkalinity 0 200 ppm CaCO3 Chlorine Dioxide 0 11 ppm ClO2
Aluminium 0 0.25 ppm Al Total hardness LR 0 50 ppm CaCO3
Ammonium 0 1 ppm N Total hardness HR 0 500 ppm CaCO3
Biguanidine (PHMB) 0 50 ppm PHMB Iron (II / III) 0 1 ppm Fe
Bromine 0 13 ppm Br2 Active oxygen 0 10 ppm O2
Calcium hardness 0 500 ppm CaCO3 Ozone 0 1 ppm O3
Total hardness 0 50 ppm CaCO3 Hydrogen peroxide 0 3 ppm H2O2
Chlorine LR 0 2 ppm Cl2 pH 6.5 8.4
Chlorine MR 0 4 ppm Cl2 Sulphate 0 100 ppm SO4 2-
Chlorine HR 0 6 ppm Cl2 Urea 0 3 ppm CH4N2O
Multi-Direct PC
Multi-parameter Photometer that permits executing a wide range of analysis covering all the water require-
ments. It replaces the photometer PC-22 (07938) by offering internal and external improvements, a wide
graphic display and an interface RS232 for connecting to a printer and a PC.
It is aimed at professionals of the sewage, potable, industrial and pool water sectors, as well as to government
and private laboratories and institutions and also to universities..
28667
1 1.9 0.023
The reagents required for analysing the following parameters are available
on request:
yanide acid 0 160 ppm Cys Phosphate LR 0 4 ppm PO4

Alkalinity-m 0 200 ppm CaCO3 Phosphate HR 0 100 ppm PO4
Alkalinity-p 0 500 ppm CaCO3 Iron (II / III) LR 0 1 ppm Fe
Aluminium 0 0.3 ppm Al Iron (II / III) HR 0 10 ppm Fe
Ammonium 0 1 ppm N Manganese 0 4 ppm Mn
Bromine 0 13 ppm Br2 Molybdenum 0 30 ppm MoO4
Calcium hardness 0 500 ppm CaCO3 Nitrate 0 14 ppm NO3-
Chlorine LR 0 2 ppm Cl2 Nitrites 0 0.5 ppm NO2-
Chlorine LR 0 4 ppm Cl2 Total nitrogen 0 14 ppm N
Chlorine LR 0 6 ppm Cl2 Ozone LR 0 0.5 ppm O3
Chlorine HR 0 200 ppm Cl2 Ozone HR 0 1 ppm O3
Chloride LR 0 25 ppm Cl- Hydrogen peroxide LR 0 3 ppm H2O2
Chloride HR 0 250 ppm Cl- Hydrogen peroxide HR 0 30 ppm H2O2
COD LR 0 150 ppm O2 pH 6.5 8.4
COD MR 0 1500 ppm O2 Potassium 0 12 ppm K+
COD HR 0 15000 ppm O2 Silica 0 4 ppm SiO2
Copper 0 5 ppm Cu Sulphate 0 200 ppm SO4 2-
Chlorine Dioxide 0 11 ppm ClO2 Sulphide 0 0.5 ppm S 2-
DEHA 0 0.5 ppm DEHA Sulphites 0 10 ppm SO3-
Total hardness LR 0 50 ppm CaCO3 Urea LR 0 3 ppm CH4N2O
Total hardness HR 0 500 ppm CaCO3 Urea HR 0 6 ppm CH4N2O
Flouride 0 2 ppm F- Zinc 0 1 ppm Zn
184
Dosage, measurement, regulation
and automation
Dosage, measurement,
regulation and
automation
186 AstralPool Signature Salt electrolysis & pH control

187 Salt electrolysis AND pH control for private pools
194 Mineralpools
measurement,
regulation ...
Dosage,
196 Neolysis Zero Salt x UV
197 UV automatic disinfection for residential pools
199 Dosing pumps
206 Continous flocculation system
206 Electrode cleaning and adjustement
207 Water meters
208 Control system
209 Dosing equipment
185
and automation
AstralPool Signature Salt electrolysis & pH control

S I G N A T U R E
GENERAL FEATURES
SMART SMART + SMART +PH ELITE
Model 30 60 100 60 100 160 60 100 160 60 100 160
Code 42347 42348 42349 42350 42351 42352 52569 52570 52571 42353 42354 42355
Consumption (AC) 0.5 A 0.8 A 1.1 A 0.8 A 1.1 A 1.5 A 0.8 A 1.1 A 1.5 A 0.8 A 1.1 A 1.5 A
Production g/h 5-6 10-12 20-24 10-12 20-24 25-32 10-12 20-24 25-32 10-12 20-24 25-32
m warm water
3
25 40 100 40 100 120 40 100 120 40 100 120
m3 hot water 25 60 120 60 120 150 60 120 150 60 120 150
Fuse (5x20 mm) 1A 2A 3.15A 2A 3.15A 4A 2A 3.15A 4A 2A 3.15A 4A
Minimum flow rate 1 m/h 2 m/h 4 m/h 2 m/h 4 m/h 6 m/h 2 m/h 4 m/h 6 m/h 2 m/h 4 m/h 6 m/h
Electrodes 3 5 7 5 7 7 5 5 5 5 7 7
- Twin cell system prevents the formation of incrustations on the chlorinator cell and improves energy efficiency.
- High quality electrodes.
- Salinity alarm with LED indicators.
Elite
This product is part of the AP Signature range.
A bubble detector, flow switch and compact probe holder as standard.
High quality electrodes with a 15,000 hour useful life under laboratory conditions and from 4,000 to 7,000
hours under normal conditions.
The Salt levels are controlled through a powerful system of salinity alarms that have different indicators for high
and low salt levels.
An automatic system that prevents the formation of deposits in the electrolysis cell - user programmable from
the control panel.
Production control 0 - 100% (11 current levels).
Complete and automatic control over water treatment, when pH and chlorine control are added to the benefits
of the salt chlorinator.
Dosing pumps not included.
Elite 60 42353 1 9.6 0.042

Elite 100 42354 1 10.6 0.042
Elite 160 42355 1 11.7 0.042
Optional: MODBUS RTU communications kit 60363 1 - -

*See disclaimer
Modbus is a registered trademark of the Modbus Organization, Inc.
186
and automation
Salt electrolysis AND pH control for private pools
Smart
Basic equipment in the range with the possibility of adapting two external controls: Redox/cover detector control.
Mass-produced equipment with a bubble detector. Electrodes have a lifetime of 10,000 hours under labora-
tory conditions, whilst under normal conditions their expected lifetime is 3,000-5,000 hours. Salinity alarm:
thanks to a shared LED it shows when there is too much or not enough salt in the water. Polarity inversion
regulation current. It has an automatic system that prevents the formation of scale on the electrolysis cells - pro-
grammable 2/3 hours.
Production control. Five production control levels from 0 to 100%.
Recommended: control pH levels using 36002-36004 machines.
Smart 30 42347 1 6.5 0.042
Smart 60 42348 1 8 0.042
Smart 100 42349 1 9 0.042

measurement,
regulation ...
Dosage,
Smart +
Middle-of-the-range equipment. External controls can be adapted: redox, cover and flow switch included.
Mass-produced equipment with a bubble detector, flow detector and a 50-1/2 connection collar.
Equipped with high quality electrodes with a lifetime of 15,000 hours under laboratory conditions, and 4,000-
7,000 hours under normal conditions. Salinity alarm: has different LED indicators for HIGH and LOW salinity.
It shows the salt levels needed. Polarity inversion regulation current. It has an automatic system that prevents
the formation of scale on the electrolysis cells can be programmed by users from the control panel.
Production control. Eleven production control levels. From 0 to 100%.
Recommended: control pH levels using 36002-36004 machines.
Smart+ 60 42350 1 8.2 0.042
Smart+ 100 42351 1 9.4 0.042
Smart+ 160 42352 1 10.9 0.042
187
and automation
SALT CHLORINATOR AND pH/Cl CONTROLLER FOR PRIVATE POOLS
Smart + pH
Middle-of-the-range equipment. External controls can be adapted: redox, cover and flow switch included.
Bubble and flow detector, compact electrode holder for pH sensor, injection point of pH minus and flowmeter.
Equipped with high quality electrodes with a lifetime of 15,000 hours under laboratory conditions, and 4,000-
7,000 hours under normal conditions. Salinity alarm: has different LED indicators for HIGH and LOW salinity.
It shows the salt levels needed. Polarity inversion regulation current. It has an automatic system that prevents
the formation of scale on the electrolysis cells can be programmed by users from the control panel.
Production control. Eleven production control levels. From 0 to 100%.
Automatic control of pH included. pH dosing pump not included.
Smart+ pH 60 52569 1 9.6 0.042

Smart+ pH 100 52570 1 10.6 0.042
Smart+ pH 160 52571 1 11.7 0.042
Electrodes Smart + / Smart + pH / Elite

Smart electrode + / Smart + pH / Elite 60 60588 1 0.6 -

(42350 / 42353 / 52569 Codes)
(42351 / 42354 / 52570 Codes)
(42352 / 42355 / 52571 Codes)
Electrodes Smart Serie

Smart electrode 30 60595 1 0.6 -

(42347 Code)
(42348 Code)
(42349 Code)
188
and automation
measurement,
regulation ...
Dosage,
189
and automation
Sel Clear
Reverse polarity self cleaning chlorinator. Easy installation and use. Meant for pools up to 95 m3. Provides a
good quality/price ratio. Optional flow switch. (available on request). Assembly on panel NOT included.
Meant for pool up to 95 m3
Chlorine
production
Up to 30 m3 9 g/h 54041 1 3.50 0.025
Up to 55 m3 13 g/h 54042 1 3.65 0.025
Up to 95 m3 19 g/h 54043 1 3.70 0.025
Sel Pure
Reverse polarity self cleaning chlorinator. Salt concentration: 5 g/l. Includes: Flow switch, Pool Terre and salt
analysis strips. Assembly on panel NOT included.
Chlorine
production
Up to 60 m3 16 g/h 54044 1 6.10 0.025
Up to 100 m3 25 g/h 54045 1 6.20 0.025
Up to 160 m3 30 g/h 54046 1 6.30 0.025
pH Pure
pH automatic control system. Includes: proportional dosing pump; 1 electrode; 1 reagent kit; 1 installation Kit.
Automatic calibration. Assembly on panel NOT included.
Up to 200 m3 54047 1 4.4 0.025
New
Dual Pure
Salt electrolysis and pH regulation. Features:
Salt electrolysis / Automatic pH regulation and dosing.
pH dosing pump included.
Automatic cover detector to avoid hyperchlorination.
The probe does not require calibrating.
Models for pools of 60, 100 and 160 m3.
Central unit and electrodes under a 2-year warranty /pH probe under a 6-month warranty.
Dual Pure 60 - Up to 60 m3 60238 1 - -

Dual Pure 100 - Up to 100 m3 60239 1 - -
Dual Pure 160 - Up to 160 m3 60240 1 - -
Salinity analysis Kit

Salinity analysis kit for checking the salt level. A regular control of the salinity level is necessary according to
the renovation of the water.
07937 1 0.8 0.001
190
and automation
Selwatch Selwatch + Selwatch Platinum

Code 54048 54049 54050
Maximum volume of the pool 100 m3 100 m3
Polarity inversion
7 blades electrodes
Flow detector
Autotest & configuration menu
Chlorine regulation
Chlorine colorimetric analysis
Chlorine reagent
Internal electrolyser
Compatible with electrolysis of salt (not

included
pH reagent
pH colorimetric analysis
pH regulation and dosing
measurement,
regulation ...
Dosage,
Selwatch
Selwatch is the first regulator system that controls an electrolysis or dosing pump. Analyzes, adjusts and auto-
matically maintains the proper chlorine level. Aimed at all pools, private or group, treated with chlorine. It also
controls all the electrolysis, valves and dosing pump of the market. Through automation of water treatment,
Selwatch ensures a perfectly water treated and easy maintenance. It works according to the needs of the pool.
It also allows to preserve the environment of the pool.
Selwatch 54048 1 5.5 0.025
Selwatch +
Selwatch + is a regulator of the rate of chlorine by colorimetry. Works by self-learning the parameters of the
pool. Compact, meets in the same box Selwatch high-end electrolysis and regulator system. Selwatch + also
has an earth device and a flow detector. Its titanium electrodes are self-cleaning glass and has a translucent
electrolysis integrated instrument holder.
Selwatch + 54049 1 11.2 0.095
Selwatch Platinum
Selwatch Platinum is the flagship model. It is the freedom of the user. It deals with the quality of your water
even during your absence. It is a regulator of the rate of chlorine colorimetric, non-toxic reagent patented elec-
trolysis up to 100 m3 and colorimetric pH regulator without probe. This "3 in 1" automatically regulates the
chlorine and pH of your pool, by colorimetry, as well as control and automatic correction of pH (using pH- or
pH +) through Selwatch. It has an adjustable setpoint and a safe injection duration.
Selwatch Platinum 54050 1 12.2 0.095
191
and automation
Salt electrolysis & pH control for private pools
Selwatch electrodes
Electrodes for Selwatch, Sel Clear and Sel Pure.
Sel Clear Electrode 30: up to 30 m 54051 1 0.35 0.0055

Sel Clear Electrode 55: up to 55 m 54052 1 0.44 0.0055
Sel Clear Electrode 95: up to 95 m *54053* 1 0.50 0.0055
Sel Pure Electrode 60: up to 60 m 54054 1 0.52 0.0055
* Selwatch electrode
Selwatch reactives
Reactives for the Selwatch range per liter.
Chlorine reactive for Selwatch 300290 1 - -

pH reactive for Selwatch 300291 1 - -
VX Salt Chlorinator
New VX reverse polarity self cleaning salt chlorinators. 63 mm water conn. on cell housing, sophisticated elec-
tronic control over reversing times extends cell life. Large LCD user interface, Spa mode output, low salt 4000
ppm. Optional: Timeclock or non clock models.
Chlorine Output
Up to 96 m3 25 g/h
VX 7S no time clock 41346 1 8.33 0.027
VX 7T time clock 41347 1 8.35 0.027
Up to 120 m3 30 g/h
VX 9S no time clock 41348 1 8.97 0.027
VX 9T time clock 41349 1 8.99 0.027
VX 7TL T/C & Light Transformer 41354 1 - 0.027
Up to 160 m3 42 g/h
VX 11S no time clock 41350 1 9.00 0.027
VX 11T time clock 41351 1 9.11 0.027
Up to 200 m3 50 g/h
VX 13S no time clock 41352 1 9.90 0.027
VX 13T time clock 41353 1 9.96 0.027
VX 9TL T/C & Light Transformer 41355 1 - 0.027
192
and automation
Salt electrolysis & pH control for private pools
New
Control Basic
Small in size, it was designed to prevent siphoning The product requires little maintenance and is easy to
install and protected from the spraying of chemical products. The device automatically measures and checks
pH/Redox. Use with Astral Sel and Astral Sel Basic is recommended. Supplied without sensors or calibration
solutions. Installation kit included.
Plastic container with IP-55 protection
Backlit LCD display
Self-calibration of electrodes
Quality control of electrodes
Dosing pause during alarms and notification by a blinking LED
Proportional dosing
Adjustable set point
Flow rate: 1.5 l/h or 5 l/h
Back pressure: 1.5 bar
pH measurement interval: 0.0014.00pH
Redox measurement interval: -999+999 mV
measurement,
regulation ...
Dosage,
Control Basic 1.5 l/h 57129 1 2.2 0.01

Control Basic 5.0 l/h 57130 1 2.2 0.01
pH electrode with calibration solutions 36004 1 0.4 0.001
Redox electrode with calibration solutions 36005 1 0.3 0.001
New
Redox Basic EV
Measuring and automatic control device of Redox levels in the pool and therefore of free Chlorine. Recom-
mended to use with "Astral Sel" and "Astral Sel Basic" salt chlorinators for controlling generated Chlorine. The
solenoid valve opens and closes the dosing units according to the readings.
Supplied without sensors or calibration solutions. Installation kit included
Redox measurement interval: -999+999 mV
Redox Basic EV 57131 1 2.1 0.01

Redox electrode with calibration solutions 36005 1 0.3 0.001
Installation kit Sensors
Control Basic pH sensor with calibration

solutions (Code: 36004)
Redox Basic EV
Redox sensor with calibration

193
and automation
Mineralpools
New
Mineral Pools
Feel the waters caress
Mineralpools is a mineral enriched salt that

Directions delivers two benefits in a single product:
1. It takes care of your pools disinfection
1. Before adding Mineralpools, 2. It takes care of your body and soul
adjust the total alkalinity to 80
ppm and the pH to 7.4
What therapeutic properties will the minerals deliver?
2. Add 40 kg of Mineralpools for
every 10,000 litres of water Mineralpools will enable you to enjoy an
Whilst the pump and the
all-round relaxing and healthy treatment.
filter are running, pour the 1. Softens the skin and hair
content of Mineralpools 2. Eliminates stress
around the edge of your 3. Relaxes the muscles
pool.
4. Relieves tension in the body
Continue filtering the water 5. Prevents the burning and stinging of chlorine
for at least 4 hours after 6. Delivers a completely odourless treatment
adding Mineralpools.
Check the total alkalinity Can it be used in any pool?

and the pH level, and adjust
if necessary. Mineralpools is suitable for use in most salt chlorinators.
1. It dissolves easily in water
2. It helps prevent staining
3. It helps prevent the build-up of lime scale on the various pieces of equipment in your pool:
chlorinator cells, heaters and stainless steel components

Further information at
www.mineralpools.com Mineralpools - 10 kg 60315 1 10 -
194
and automation
Neolysis Zero Salt x UV
Neolysis, the most advanced water treatment by AstralPool: + Sustainability + Innovation + Disinfection
+ Healthy.
Advantages:
- Water suitable for watering.
- Salt content of 2 g/l.
- Dual disinfection based on UV and electrolysis.
- Unbeatable water quality.
Characteristics:
- The ultimate in chloramine reduction capacity (UV LP + Electroysis).
- Series LS electrodes (4,0005,000 h) for private pools and series EX LS electrodes (6,0008,000 h) for
public pools.
- UV LP HO lamps (13,000 h).
- Zero Salt x UV neolysis system that does not need additional salt for maintenance.
- Patented process
New
Zero Salt x UV Neolysis system for private pools
Series LS electrodes (4,000-5,000 h). Code Standard Standard Standard
AP NEO 12 Gr/h + UV 48 W 57744 1 - -
AP NEO 24 Gr/h + UV 56 W 57745 1 - -
AP NEO 32 Gr/h + UV 56 W 57746 1 - -
AP NEO 12 Gr/h + UV 48 W+ PH 57747 1 - -
AP NEO 24 Gr/h + UV 56 W+ PH 57748 1 - -
AP NEO 32 Gr/h + UV 56 W+ PH 57749 1 - -
AP NEO 12 Gr/h + UV 48 W+ PH/ORP 57750 1 - -
AP Chlore Basic AP Chlore pH AP Chlore pH/ORP Production Zero Salt Electrolysis + UV Pool up to
57744 57747 57750 12 gr Cl2 /hr + 48 W UV 50 m3
57745 57748 57751 24 gr Cl2 /hr + 56 W UV 80 m3
57746 57749 57752 32 gr Cl2 /hr + 56 W UV 120 m3
Lamps for the Neolysis system in private pools

48-W UV LP-10 lamps 60599 1 0.10 -

(Codes 57744, 57747, 57750)
56-W UV LP-14 lamps 60606 1 0.11 -
(Codes 57745, 57748, 57751, 57752)
48- and 56-W UV LP-10/14 quartz lamps
(lamp 48 W y 56 W) 60607 1 0.08 -
Ask your dealer for replacement electrodes.
196
and automation
UV automatic disinfection for residential pools
Heliox UV LP S.S. and Heliox UV LP PE (LP = low pressure) systems are designed to be used in residential
pools. They work on a wavelength of 254 nm, which is ideal for removing microorganisms. They will enable
you to benefit from the latest ultraviolet light technology in the field of water treatment.
New features of LP S.S. & LP PE:
Stainless steel and polyethylene versions.
Double lamp version (LP30 and LP30+).
Plastic injection power box.
Fluidra technology (design and manufacturing).
Lamp ON indicator.
Electronic counter for working time and ignitions (lamp lifetime control).
Flowswitch (optional, included in LP+ versions).
LP+ versions come with a built-in pH/ORP controller (complete package).
LP+ versions come with a flow meter, pH/ORP electrodes and electrode holder (doing pumps not in-
cluded).
Heliox UV LP S.S. for residential pools
measurement,
regulation ...
Dosage,
Heliox UV LP 10 52206 1 - -
Heliox UV LP 14 52207 1 - -
Heliox UV LP 25 52208 1 - -
Heliox UV LP 30 52209 1 - -
Version with pH/ORP Control (LP+):

Heliox UV LP 10 + 52210 1 - -
Heliox UV LP 14 + 52211 1 - -
Heliox UV LP 25 + 52212 1 - -
Heliox UV LP 30 + 52213 1 - -
Heliox UV LP PE for residential pools

Heliox UV LP P10 52214 1 - -
Heliox UV LP P14 52215 1 - -
Heliox UV LP P20 52216 1 - -
Heliox UV LP P25 52217 1 - -
Version with pH/ORP Control (LP+):

Heliox UV LP P10 + 52218 1 - -
Heliox UV LP P14 + 52219 1 - -
Heliox UV LP P20 + 52220 1 - -
Heliox UV LP P25 + 52221 1 - -
Flow N Rated / UV-C Total

Material Code Model Code Model
(30 mJ/cm2) lamps power height (mm) reactor
S.S. 52206 UV LP 10 52210 UV LP 10+ 10 m3/h 1 48 / 13 W 790 204
S.S. 52207 UV LP 14 52211 UV LP 14+ 14 m3/h 1 56 / 18 W 790 204
S.S. 52208 UV LP 25 52212 UV LP 25+ 25 m3/h 1 90 / 30 W 1033 204
S.S. 52209 UV LP 30 52213 UV LP 30+ 30 m3/h 2 2 x 75 / 2 x 25 W 1033 204
PE 52214 UV LP P10 52218 UV LP P10+ 10 m /h
3
1 48 / 13 W 735 200
PE 52215 UV LP P14 52219 UV LP P14+ 14 m3/h 1 56 / 18 W 735 200
197
and automation
UV automatic disinfection for residential pools
Heliox UV LP lamps

48-W UV LP-10 lamps 60559 1 0.100 -

(Codes 52206, 52210, 52214, 52218)
56-W UV LP-14 lamps 60606 1 0.115 -
(Codes 52207, 52211, 52215, 52219)
75-W UV LP-20 lamps 60608 1 0.200 -
(Codes 52216, 52220)
90-W UV LP-25 lamps 60609 1 0.120 -
(Codes 52208, 52212, 52217, 52221)
Kit of 2 x 75-W UV LP replacement lamps 60637 1 0.240 -
(Codes 52209, 52213)
48- and 56-W UV LP-10/14 quartz lamps
(lamps 48 W y 56 W) 60607 1 0.080 -
75- and 90-W UV LP-20/25/30 quartz lamps
(lamps 75 W y 90 W) 60631 1 0.090 -
198
and automation
Dosing pumps
Exactus membrane dosing pumps
All systems comply with EC regulations. IP-65 protection. Electrical connection: 220/240 V 50/60 Hz.
Materials in contact with the liquid: Polypropylene, Viton, Teflon and PVC. Other valve models in different
materials available on request. Includes anti-acid plastic housing. Touch sensitive moisture resistant indica-
tor. Drainage valve included. Lubrication-free, minimal maintenance. On request, the unit can be supplied
with outlet, level probe or other operating voltages.
Available materials:
Pump head: PP, and available in PVDF and PTFE to order
Diaphragm: PTFE
Valves: FPM lip valve (Viton) and other elastomers such as EPDM (Dutral), NBR (nitrile) and silicone avail-
able to order. Ceramic ball valves available.
Connections: 4 x 6 mm
Installation kit included with all pumps: full suction filter (PP-FPM by Viton), injection valve ( PP-FPM de
Viton), suction/return piping 2 m + 2 m PVC, 2-m PE distribution hose.
measurement,
regulation ...
Dosage,
EXACTUS PUMP PERFORMANCE CURVES
New
Exactus Manual model
Electronic dosing pump for wall mounting or horizontal base. Manually regulated flow rate. Regulation range:
0-100% and 0-20%. Acid resistant plastic housing.
Manual 2 l/h - 5 bar 57153 1 4 0.005

Manual 2 l/h - 10 bar 57154 1 4 0.005
Manual 5 l/h - 7 bar 57155 1 4 0.005
Manual 5 l/h - 10 bar 57156 1 4 0.005
Manual 10 l/h - 5 bar 57157 1 4 0.005
Manual 20 l/h - 5 bar 57158 1 4 0.005
199
and automation
Dosing pumps
New
Exactus Manual Microprocessor model
Electronic dosing pump for wall mounting or horizontal base. Manually regulated flow rate with digital control
for injection frequency. 3 digit display. Regulation range: 0-100%, with a scale of 1%. Product ready to incor-
porate level probe (not included). Acid resistant plastic housing. o.
Manual Digital 2 l/h - 5 bar 57159 1 4 0.005

New
Exactus Proportional model
Proportional pump controlled by the mA signal. The pump may be connected to a transmitter/indicator instru-
ment or to another device that feeds in an intensity-modulated signal of 0 to 20 mA. The frequency drive of the
pump will be proportional to the mA signal received, i.e. the higher the signal, the greater the pump's flow rate.
The pump can be set to work in reverse mode, i.e. the higher the signal, the lower the flow rate.
This model can be adapted for other mA rates (0-20mA, 4-20mA, 20-4mA).
Proporcional (4-20mA) 5 l/h- 7 bar 57164 1 4 0.005
New
Exactus pH / Rx model
LCD backlit display screen with ON/OFF or proportional operating modes of 0 14 pH, -1000 1400 mV, pH,
RX (ORP) electrode input (10 tera-ohms), electrode not included, screen resolution of 0.01 pH; 1 mV and
optional input flow sensor.
pH / Rx 5 l/h - 7 bar 57168 1 4 0.005

pH / Rx 5 l/h - 10 bar 57169 1 4 0.005
pH / Rx 10 l/h - 5 bar 57170 1 4 0.005
New
Exactus Volumetric VFT model
Electronic dosing pump for mounting on the ground or on walls. Proportional volumetric dosing pump that
works from signals received from a flow meter. Can be operated in manual or automatic mode depending on
the signals received. Code Standard Standard Standard
Volumetric model 5 l/h - 7 bar 57174 1 4 0.005

200
and automation
Dosing pumps
pH electrode
For pH Exactus model.
01303 1 0.2 0.001
RX electrode
For RX Exactus model.
measurement,
regulation ...
Dosage,
01304 1 0.3 0.001
CL electrode
For CL Exactus model.
45896 1 - -
Electrode holder

01305 1 0.3 0.001
Electrode holder (pressure)

For working with pressure.
01306 1 0.3 0.001
201
and automation
Dosing pumps
Optima dosing pumps

The OPTIMA dosing pump represents the development of more than 30 years of experience in the automatic
dosing field. This new series reduces the number of pumps required to meet the various dosing needs.
The OPTIMA dosing pump series, with its new power supply technology from 90, VCA to 265 VCA and at 50-60
Hz, ensures a precision and reliability never seen before.
Integration of many functions due to its simple programming, an alphanumeric display, the possiblity of mul-
tilingual programming of the menu and a new technology which permit controlled flow rate and back pressure.
Allows to use the same model for various applications providing a great versatility.
Systems produced according to EC standards, IP65 protection, 90-265 VCA 50/60 Hz electrical power sup-
ply. Materials in contact with the chemical product are made of polypropylene, Viton, Teflon and PCV (other
materials possible upon request). Anti-acid plastic container. Moisture-resistant membrane buttons. Built-in
relief valve. No lubrication necessary, minimum maintenance. Peristaltic pump also available (see page 270).
l/h 90
85
80
75
70
65
60
55
50
45 Tipo D
40
35
30
25
20
15 Tipo C
10
5 Tipo B
0
0.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
bar
New
OPTIMA constant flow rate analog dosing pump
The flow rate can be set as a percentage using the potentiometer under the front panel, which modifies the
pump's operation frequency. Disposes of a level sensor inlet.
Double scale adjustment: OPTIMA analog dosing pumps can divide the maximum dosing frequency by 5. This
double scale allows the user to have two pumps with a single model.
Type B Optima Manual Adjustable Pump

5-10 bar and 2-5 l/h 57132 1 3.5 0.01
Type C Optima Manual Adjustable Pump
5 bar and 10 l/h 57133 1 4.5 0.01
Type D Optima Manual Adjustable Pump
5 bar and 20 l/h 57135 1 4.5 0.01
202
and automation
Dosing pumps
New
OPTIMA proportional and volumetric digital dosing pump
OPTIMA pumps provide all the functions of proportional dosing in a single model.
Features:
- Proportional with analog signals 0/420mA
- Proportional with digital signals and the possiblity of:
Multiplying the input impulses (1:n)
Dividing the input impulses (n:1)
Function in ppm
The pump has a memory function for processing input impulses dosing
- Level alarm with pump disconnection.
- Maximum dosing flow rate to prevent overdosing.
- Password for protecting programmed data
- Possibility of alarm connection.
- 90-265 VAC 50/60 Hz power supply.
measurement,
Typo B Model 7-10 bar and 5 liters 57136 1 3.5 0.01
regulation ...
Dosage,
Typo C Model 5 bar and 10 liters 57137 1 4.5 0.01
Typo D Model 5 bar and 20 liters 57138 1 4.5 0.01
New
OPTIMA dosing pump with pH / Redox analyzer
OPTIMA dosing pump with built-in pH/Redox control. pH/Redox instrument. Automatic calibration: Calibration
by simply pressing a button, with the possiblity of controlling the level of probe efficiency
Features:
- 90-265 VAC 50/60 Hz power supply
- Manual compensation of temperature for pH or automatic compensation with PT100.
- 420mA output for printed register or transmision of the reading.
- Level alarm with pump disconnection.
- Set point deviation alarm, programmable for the entire measurement range.
- O.F.A. time (Over Feed Alarm) to prevent dosing if any probe malfunctions.
- Maximum dosing flow rate to prevent overdosing.
- Password for protecting programmed data.
- Possibility of alarm connection.
Typo C Optima Redox/pH

control dosing pump
(10 bar and 5 l/h and 5 bar and 10 l/h) 57140 1 4.5 0.01
Electrode holder not included (code 01306)
Sensors
pH sensor with calibration solutions

(Code: 36004)
Redox sensor with calibration
203
and automation
Dosing pumps
Automatic relief valve

Gas inside the dosing pump head may compromise proper operation of the pump. The relief valve automati-
cally eliminates gas produced inside the pump's head. The relief valve must be installed directly on the dosing
unit's delivery valve.
36829 1 0.1 0.001
Bracket for mounting above tank

Optional support for mounting the OPTIMA series and pH Basic horizontally; for example, above chemical solu-
tion tanks.
36830 1 0.1 0.002
New
Peristaltic dosing pump
Maximum flow 3 l/h at 96 r.p.m. Power supply 220/240 V 50/60 Hz. Regulation from 10% to 100%. The
materials in contact with the liquid are Silicone and PP.
01 variable flow pump (3 bar) 40834 1 - -
Polyethylene cylindrical tanks

To hold chemicals for dosage pumps.
Capacity: 125 l 01314 1 4.5 0.120
Capacity: 250 l 01315 1 10.0 0.390
Capacity: 350 l 01316 1 14.0 0.510
Capacity: 500 l 01317 1 21.5 0.760
Capacity: 1000 l 28831 1 - -
Manual stirrer
For Polyethylene tanks.
Length 60 cm 01318 1 0.5 0.010
Length 90 cm 01319 1 1.2 0.020
204
and automation
Dosing pumps
Definition:
1. Organic Chlorine (stabilised Chlorine): This term is used to indicate pools treated with trichlor tablets,
granular Dichor etc. in other words, pools that use an Isocyanuric acid organic compound.
2. Inorganic Chlorine (un-stabilised Chlorine): This term is used to indicate pools treated with either Sodium
or Calcium Hypochlorite.
3. Organic Bromine: This term is used to indicate pools treated with Dimethylhydantoin Bromine (in tablets).
Rolachem RC8 Series - Automatic Acid (pH) & Chlorine (ORP)

The RolaChem RC8 is a proportional dosing pH and ORP controller. New pH and ORP sensors have integral
amplifiers and high level shielding to virtually eliminate interference. Easy to calibrate and easy to operate with
large 4 line LCD display to guide installers and users through set up and operation. Integral peristaltic pumps
measurement,
regulation ...
Dosage,
from 1 RPM to 100 RPM for all size swimming pools and ABS case. Software easily adjusts dosing rates for
bather load and weather conditions. Available in ORP only, pH only and ORP and pH control. 3 Year Pro rata
warranty.
Chlorine (ORP) & Acid (pH) models:
RC8 5/1 Automatic ORP & PH with LCD 43901 5 RPM 1 RPM 1
Chlorine (ORP) only models

RC8 5/0 Automatic ORP with LCD 43906 5 RPM - 1
Acid (pH) only models

RC8 0/1 Automatic PH with LCD 43909 - 1 RPM 1
Max pool size Max pool size

Motor size RPM Litres per Hour
for chlorine for acid
1 RPM 20 ml (minimum) - 200 ml (maximum) N/A 80,000
5 RPM 100 ml (minimum) - 850 ml (maximum) 80,000 240,000
20 RPM 800 ml (minimum) - 3,000 ml (maximum) 240,000 750,000
100 RPM 3,000 ml (minimum) - 15,000 ml (maximum) 750,000 N/A
205
and automation
Continous flocculation system
Floc System
Automation flocculant dosing adjustable flow water pools.
Includes: adjustable pump from 151 cm3/h until 1.5 l/h, injector valve, bottom filter, suction and return tube.
54528 1 5.6 0.033
Electrode cleaning and adjustement
Cleaning kit n 1
Contains:
Buffer solution pH 4,
Redox solution 460 mV &
Cleaning solution.
16652 1 1.1 0.002
Cleaning kit n 2
Contains:
Redox solution 460 mV &
Cleaning solution.
16653 1 1.1 0.002
Solutions

Buffer solution pH 4 16654 4 5.5 0.010
Redox solution 460 mV 16657 4 5.5 0.010
Cleaning solution 16658 4 5.5 0.010
206
and automation
Water meters
Residential water meters

Dry operation. Models 1/2 - 3/4 single jet. Models 1 - 11/4 - 11/2 multiple jets. Adjustable totalizer 360.
For cold water up to 30. Direct reading by means of numbered drums. From 1 prefitted with cycle emitter of
impulses and EEC 75/33 certified. Fittings included.
Calibre Maximum A F C Code Standard Standard Standard
B
reading Packaging Weight kg Volume m3
Racor mm m3
*1/2 15 99.999 115 72 59.5 59.5 01134 1 0.5 -

*3/4 20 99.999 115 72 59.5 59.5 01135 1 0.6 -
1 25 99.999 260 103 124 190 01136 1 2.1 -
11/4 30 99.999 260 103 124 190 01137 1 2.2 -
11/2 40 999.999 300 128 155 222 01138 1 4.5 -
* Primitive verification included
Metrology Features
measurement,
regulation ...
Dosage,
Nominal Diameter DN mm 15 20 25 30 40
inches 1
/2 3
/4 1 11/4 11/2
Starting flow l/h 7 12 25 25 70
Metrology features
Minimum reading step l 0.05 0.05 0.05 0.05 0.5

Max. total reading m3 99,999 99,999 99,999 99,999 999,999
Maxi head loss at max Q bar - - 0.42 0.85 0.7
Maxi admissible temperature C 30 30 30 30 30
Maxi admissible pressure bar 16 16 16 16 16
Max Q m3/h 3 5 7 10 20
Approved CEE values
Qn m3/h 1.5 2.5 3.5 5 10

Qt m3/h 0.12 0.20 0.28 0.4 0.8
Min Q m3/h 0.03 0.05 0.07 0.1 0.2
ATTENTION: Head loss at max Q bar 0.9 0.9 0.6 1 1
The water meter metrology, indi- Approval certificate CEE/ISO F99.00.382.0008.0
cated below, follows CEE/ISO
class A regulations.
Industrial water meters

Dry dial meter with numerical readout, for water till 50 C. Removable measuring mechanism, except that of
2 gauge. Maximum reading capacity: 10,000,000 m3.
*2 gauge - 50 mm 01139 1 9.0 0.006

21/2 gauge - 65 mm 01140 1 13.0 0.008
3 gauge - 80 mm 01141 1 15.0 0.030
4 gauge - 100 mm 01142 1 17.0 0.030
6 gauge - 150 mm 01144 1 28.0 0.060
8 gauge - 200 mm 01145 1 48.0 0.060
*Measuring mechanism not removable.
Woltman type turbine meters

Woltman type axial turbine water meter, with numerical counter readout, and numbered drums. Dry dial with
magnetic transmission. Easily removable gearwork and turbine. Pre-set for pulse emission. IP-68 protection
level. CYBLE type pulse emission.
2 gauge - 50 mm 20430 1 12.0 0.004
21/2 gauge - 65 mm 20431 1 13.6 0.004
3 gauge - 80 mm 20432 1 14.6 0.004
4 gauge - 100 mm 20433 1 20.0 0.006
5 gauge - 125 mm 20434 1 30.0 -
6 gauge - 150 mm 20435 1 36.0 0.009
8 gauge - 200 mm 20436 1 55.0 0.012
CYBLE type emitter K= 1 l/pulse 23235 1 - -
CYBLE type emitter K= 10 l/pulse 23235-0010 1 - -
CYBLE type emitter K= 100 l/pulse 23235-0100 1 - -
207
and automation
Control system
Electrically driven plastic valves - Nylon

Threaded connection. Manually operated ON position Flow regulator. Stainless Steel AISI-302 spring. Maxi-
mum working pressure = 10 atm.
11/2 connections 09392 1 0.5 -
2 connections 06935 1 0.7 -
3 connections 06936 1 1.1 -
Pressure and flow diagrams

MODELS 09392 06935 06936
Water head in m.c.a.

Connection 11/2 2 3
Minimum pressure kg/cm2 1 1 1
Maximum pressure kg/cm 2
10 10 10
Maximum flow m3/h 30 40 60
Flow m3/h
24 Volt. solenoids
To install in electric valves with code 09392, 06935 and 06936.
09393 1 - -
BALANCE TANK INSTALLING DIAGRAM
FROM POOL OVERFLOW FROM WATER NETWORK
ELECTRO DRIVEN VALVE
WATER METER
TO THE FILTRATION
SYSTEM
TO DRAIN
FROM POOL
DRAINAGE
Maximum water level signal in BALANCE TANK for starting the pumping system.
Minimum water level signal in BALANCE TANK for opening the electrically operated valve for make up water.
Minimum level signal in BALANCE TANK for shutting down the pumping system.
208
and automation
Control systems
Electronic operating panel for overflow pool balance tank

For overflow pool. Water level sensor with 2 m cable.
For 2 water levels control panel:
* Minimum safety level for pump operation: The pump stops working if water level doesnt have the minimum
set level.
* Water make up level: Gives the solenoid valve the opening signal to keep correct water level in balance tank.
Solenoid valve signal in 220 V II & 24 V II.
12061 1 - -
3 water level control panel:
* Minimum safety level for pump operation: The pump stops working if water level reaches the minimum set
level.
* Water make up level: Gives the solenoid water inlet valve, the opening signal to keep correct water level in
balance tank. Solenoid valve signal in 220 V II & 24 V II.
* Pump start level: The pump starts operation when water level in balance tank reaches the overflow level
(pipe burst or check valve failure)..
measurement,
regulation ...
Dosage,
Dual frequency (50/60 Hz) 12062 1 - -
Buoys
Plastic float. Code Standard Standard Standard
26 x 34 - 1 20259 1 - -
40 x 49 - 11/2 20261 1 - -
50 x 60 - 2 20262 1 - -
Code A (mm) Float (mm)

20259 386 180
20260 591 220
20261 596 220
20262 699 300
Dosing equipment
Shark floating dispenser

The ergonomic cap makes it easy to handle the chemical products and measure out the amounts needed. Made
of high impact polystyrene, it comes in a shark-grey finish. It has a capacity for 5 tablets of 200 g.
36620 1 - -
New
Oval floating dispense - Basic Line
Flaoting dispenser for chlorine tablets.
For 20-g tablets 38629 12 4.0 0.030
For 200-g tablets 38630 12 4.0 0.079
For 200-g tablets. With thermometer. 58663 12 3.3 0.076
209
and automation
Dosing equipment
Dossi-5 in-line and Dossi-10 in-line Bromine feeders

Bromine dispenser. Manufactured from unalterable plastic materials (ABS). With regulation valve, manual
purge, Venturi automatic depression purge, and opening key. For pools up to 45 m3 with the Dossi-5 dispenser
and up to 90 m3 Dossi-10 dispenser. Connections 11/2". 200 mm.
Dossi-5 in-line. Height 486 mm. 21438 1 3.7 0.031

Approximate capacity: 5 kg of tablets
Dossi-10 in-line. Height 725 mm. 21439 1 4.8 0.049
Approximate capacity: 10 kg of tablets
Chlorine and Bromine Feeder Dossi-5 and Dossi-10 off-line

Bromine and Chlorine feeder. Manufactured from unalterable plastic materials (ABS). Approximate capacity: 5
kg of tablets for Dossi-5 and 10 kg for Dossi-10. Supplied with two valves in order to stop the water flow. Height
486 mm and 200 mm. Connections 20 mm.
Dossi-5 off-line For pools up to 100 m3 01413 1 3.7 0.031

Dossi-10 off-line For pools up to 200 m3 43998 1 4.86 0.048
Volume of chlorine-treated pools Volume of bromine-treated pools

Dossi 5 20 m - 80 m
3 3
4 m3 - 50 m3
Dossi 10 20 m3 - 160 m3 4 m3 - 100 m3
Chlorine and Bromine Feeder 3.5 kg Dossi-3

Chlorine and Bromine feeder. Manufactured from unalterable plastic materials (ABS). Approximate capacity:
3.5 kg of tablets. Lid closing with double safety system. Easy to operate regulation valves. For pools up to
60 m3 with Chlorine and up to 30 m3 with Bromine. Height: 405 mm.
Dossi-3, in-line
For direct connection to pipework
With 11/2 connectors 24429 1 1.81 0.03
Dossi-3 off-line
For by-pass connection with
flexible tube 24430 1 1.90 0.031
Code 24429 IN-LINE Code 24430 OFF-LINE
FROM FILTER TO POOL
TO FILTER
FROM FILTER TO POOL

PUMP
210
and automation
Dosing equipment
INSTALLATION DIAGRAM OF CHLORINE/BROMINE DOSING UNITS

AND AUTOMATIC REGULATING AND CONTROL EQUIPMENT
to drain
pH dosing tank
Automatic regulating and con-
measurement,
Chlorine dos-
regulation ...
trol equipment Dosing pump
age tank
Dosage,
Compact dosage tank
Trichlor and Bromine tablet dosage unit with automatic safety valve. Made out of fibreglass and polyester.
Compact dosage tank 40 l 16631 1 14.0 0.128

Trichlor (for pools from 200 to 500 m3)
Bromine (for pools from 150 to 300 m3)
Compact dosage tank 60 l 16632 1 18.0 0.185
Trichlor (for pools from 500 to 1000 m3)
Bromine (for pools from 300 to 450 m3)
Safety valve kit

PVC safety valve, with a spring and metallic pull ring. Opening pressure 2.5 - 3 bar (Kg/cm).
For 40 l dosage tank 16633 1 0.4 0.002
For 60 l dosage tank 16634 1 0.4 0.002
Flowmeter kit
Plastic made flow meter for 100 to 1,000 l/h flow for 40 l dosing tank, and a 250 to 2,500 l/h flow for 60 l
dosing tank both installed on a PE panel. Strainer, non-return valve and PVC ball valve included. Used to help
regulation for 40 l and 60 l feeders.
For 40 l tank from 100 to 1000 l/h 16635 1 3.0 0.046
For 60 l tank from 250 to 2500 l/h 16636 1 3.3 0.050
211
POOL CLEANING
EQUIPMENT
214 NetNClean integrated cleaning system

216 Automatic suction cleaners
227 Automatic suction cleaners for commercial pools
229 Pool cleanes pumps
230 Manual suction cleaners
232 Handles
233 Suction hoses
POOL CLEANING
EQUIPMENT
234 Leaf skimmers
235 Brushes
236 Thermometers
237 Cleaning kits
213
NetNClean integrated cleaning system
Integrated cleaning system

The NETNCLEAN is an efficient cleaning system, consisting of a six outlet distributor valve that receives clean water from the filter and distributes
it sequentially to a series of nozzles installed on the pool floor.
As pressurised water exits the nozzles, it lifts dirt from the bottom into suspension to be collected by the skimmer and the drain. The Net n Clean
offers a more efficient and cost effective alternative to other cleaning systems as it provides a more uniform distribution of the pool temperature
and chemicals.
INSTALLATION DIAGRAM
NetnClean distributor valve 50 mm

Six way distribution valve. This valve is part of the Net'n'Clean cleaning system which is integrated in the pool
floor. It distributes water sequentially through its various branches. Made of plastic and titanium it has high
resistance to salt water. Maximum working pressure: 1.4 bars. Maximum flow: 15m/h. Connections: 7 x 50
mm. 2 pop-up nozzles for branch recommended.
Packing Weight kg Volume m3
NetnClean distributor valve:
European model 21257 1 1.7 0.015
NetNClean distributor valve 63 mm

Distributor valve optimized for greater hydraulic performance. Maximum working pressure of 1.8 bars. Maxi-
mum flow of 24 m3/h. Connections: 7 x 63 mm or 7 x 75 mm. From 2 to 4 nozzles per branch.
Net'N'Clean distributor valve 63 mm 35079 1 5.6 0.031
NetNClean reducing wall conduit for nozzles

Reducing conduit to install concrete Net'N'Clean nozzles (26985). Made in white PVC. 50 mm inside &
63 mm outside connections.
21248 12 7.3 0.032
Wall conduit 90 mm
Reducing conduit to install concrete Net'N'Clean nozzles (26985). Made in white PVC. 50 mm inside &
63 mm outside connections.
Wall conduit 90 / 63-75 mm 21248 12 7.3 0.032
For the nozzles:

Net'N'Clean: 43584 - 43585
BCN 03: 43586 - 43587 - 43588 - 43589
Inlet/suction nozzle for large flows: 41518 - 41519 - 41520 - 41521
214
NetNclean integrated cleaning system
Net'N'Clean nozzle
NetNClean nozzle range with 4 different hole configurations. We recommend S4 for the floor and S1 and S2
for the steps. Designed for concrete, liner and fibreglass pools.
The flow rates and radius of action according to the outlet chosen on the nozzle are:
Concrete Outlet Combination Flow x nozzle m3/h Cleaning length in metres Outlet surface in mm2
S1 B+D 2.5 0.60 50
S2 A+D 4 1.25 100
S3 B+C 5 1.80 150
S4 A+C 5 1.80 200
In bold type, the configuration supplied from factory.
Concrete Code Standard Standard Standard
For concrete pools:
With swivel joint 26985 12 4.14 0.02
Fixed 26986 12 3.78 0.02
For liner pools:
Fixed self threaded PN10 28499 12 5.05 0.034
Fibreglass With metallic insert PN10 28500 12 5.05 0.034
With swivel joint, with inserts 43584 12 5.64 0.033
With swivel joint, with self-tappers 43585 12 5.30 0.033
POOL CLEANING
For Fibreglass pools:
EQUIPMENT
Fixed 21209 12 5.05 0.034
On demand can be supplied with the following colours: Sky blue, Navy blue, Grey metal flake, Grey metal
and Black.
Liner
Concrete Liner Fibreglass
Grey Metal Black

Ral 7011 Ral 9005
Grey Metal Flake Sky Blue

Ral 5015
White Navy Blue

Ral 9003 Ral 5022
NetNClean electronic integrated cleaning system

The NetNClean electronic recommended for public or large private pools is equipped with an electronic
panel that automatically controls a series of solenoid valves used to open or close water flow to each nozzle
branch. Computer controlled. Controls up to 12 electrovalves. Maximum flow rate: 18 m3/h for each valve.
4 valve system 32388 1 16.55 0.260

6 valve system 22512 1 24.83 0.260
8 valve system 22514 1 31.10 0.029
10 valve system 22516 1 35.40 0.029
12 valve system 22518 1 39.70 0.029
We will not be held responsible for any malfunction or other problems deriving from an incorrect installation. To avoid any such
problems, please follow the instructions outlined in the installation manual.
215
Automatic suction cleaners
Vals
Suction side pool cleaner suitable for all types of private pools. Connected to the pool's suction nozzle or the
skimmer, it is able to suck up all the dirt on the pool bottom and walls. It works silently thanks to membrane
technology. Its energy source is the pump of the filtration system and dirt is retained by the pool's filtration
system. Easy to install by the end user without the need for tools. It is supplied with 14 flexible hoses (0.8 m
each) that can be easily connected to adjust the total length of the hose to the size of the pool.
Vals suction cleaner 53789 1 6 0.05
New
Mamba
Mamba can be installed in minutes whitout any tools and requires no alteration to your pool. It can be adopted
to flat-bottomed or sloped pools and can be used in above ground pools. It is connected directly to the skimmer
or the suction line. It works by suction with no need of electricity using the existing filtration system (4m/h
minimum). It is supplied with a 10 m special hose for greater efficiency. It is a cleaner and aslo a mobile main
drain. It is supplied with a pressure regulator to ensure constant flow.
Mamba suction cleaner 60092 1 8.1 0.061
New
Beaver
Hydraulic suction cleaner with a membrane system suitable for all types of pool. It runs off the filtration cir-
cuits pump. Connected to the skimmer's suction inlet, it is able to climb walls and suck up all of the dirt from
the pool floor that is then retained in the filter. It is easy to install and maintain.
Beaver suction cleaner 60091 1 - -
216
Comparison table of automatic pool cleaners for private pools
Pulit
Pulit Pulit Pulit Hurricane 7
Models Max 1 Max+ 3 Max+ 5 Pro Advance+ 7 Hurricane 3 Hurricane 5 Hurricane 7
Advance+ 3 Advance+ 5 Advance+ 7 Duo
Duo
Code 57350 57348 60321 57340 57341 57342 57343 57344 57345 57346 57347
Floor Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Wall No No Yes No Yes Yes Yes No Yes Yes Yes
Remote Control No No No No No Yes Yes No No Yes Yes
1.5 / 2 / 1.5 / 2 /
Working Cycle (h) 1/2 2.5 1.5 / 2 1.5 / 2 1.5 / 2 1 / 1.5 / 2 1.5 / 2 1.5 / 2 1 / 1.5 / 2
2.5 2.5
Aquasmart No Yes Yes Yes Yes Yes Yes No Yes Yes Yes
External timer
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
POOL CLEANING
capability
EQUIPMENT
Internal timer No No No No No Yes Yes No No Yes Yes
Filter check indi-

No No Yes Yes Yes Yes Yes Yes Yes Yes Yes
cation
Swivel No No Gyro No No Yes Yes No No Yes Yes
Pool shape
No No No No No No Yes No No No Yes
adjustment
Obstacle detection No No No No No No Yes No No No Yes
Floating cable
15 18 18 18 18 18 23 18 18 18 23
length (m)
Buggy / caddy / trolley No No No No Caddy Caddy Caddy Trolley Trolley Trolley Trolley
Suction flow (m3/h) 18 16 16 17 17 17 17 17 17 17 17
Top access Top access Top access Top access Top access Top access Top access
Filter Top access Top access Top access Top access
- easy view - easy view - easy view - easy view - easy view - easy view - easy view
Max Max Vibrating Vibrating Vibrating Vibrating Vibrating Vibrating Vibrating Vibrating
Mechanical cleaning No
scrubber scrubber brush brush brush brush brush brush brush brush
Inlet height
No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
calibration
24V DC 24V DC 24V DC 2 x 24V DC 24V DC 24V DC 24V DC 2 x 24V DC

Drive motor - 24V DC 24V DC
brushless brushless brushless brushless brushless brushless brushless brushless
24V DC 24V DC 24V DC 24V DC 24V DC 24V DC 24V DC 24V DC

Pump motor 48V DC 24V DC 24V DC
brushless brushless brushless brushless brushless brushless brushless brushless
PVC PVA PVA PVA PVC PVA PVA PVA

Wheels PVC wheels PVA wheels PVA wheels
brushes brushes brushes brushes brushes brushes brushes brushes
Power supply AQP SPS Basic SPS SPS 100 SPS 100 SPS 100 SPS 300 SPS 400 SPS 100 SPS 100 SPS 300 SPS 400
100-259 V/ 100-259 V/ 100-259 V/ 100-259 V/ 100-259 V/ 100-259 V/ 100-259 V/ 100-259 V/ 100-259 V/ 100-259 V/ 100-259 V/
Electrical
50-60 Hz / 50-60 Hz / 50-60 Hz / 50-60 Hz / 50-60 Hz / 50-60 Hz / 50-60 Hz / 50-60 Hz / 50-60 Hz / 50-60 Hz / 50-60 Hz /
specifications
145 W 210 W 210 W 210 W 210 W 210 W 210 W 210 W 210 W 210 W 210 W
217
New
Max 1
The Max 1 almost effortlessly removes all dirt from pool floors thanks to its top access filters. The easy-view
transparent window enables users to easily see when the filters have to be washed. There are two cleaning cy-
cles (1 and 2 hours) that can be automatically switched on and off using an external timer (not included). It
works on a single motor able to cover 18 m3/h, which makes the Max 1 one of the lightest pool cleaners on the
market at just 11.48 kg (without cable). It has 15 m of cable and can be used in pools of up to 8 m in length.
Max 1 suction cleaner 57350 1 7.5 0.14
Max+ 3
Elegant and with an exceptional design, the Max+ 3 pool cleaner removes all dirt from the bottom of pools
thanks to its smart electronic components and its efficient Max Scrubber system that scrubs dirt off any sur-
face. It is characterised by its excellent ergonomics, lightweight design, and filters that can be reached from
the top. Thanks to its transparent covers, it is easy to tell when the filters need cleaning. It works in 2.5 hour
cycles and comes with an 18 m floating cable and height-adjustable suction nozzles to ensure it adapts per-
fectly to any pool.
POOL CLEANING
EQUIPMENT
Max+ 3 suction cleaner 57348 1 - -
New
Max+ 5 Pro
Elegant and with an exceptional design, the Max 5 pool cleaner removes all dirt from pool bottom and walls
thanks to its smart electronic components and its efficient Max Scrubber system that scrubs dirt off any sur-
face. It is characterised by its excellent ergonomics, lightweight design, and filters that can be reached from
the top. Thanks to its transparent covers, it is easy to tell when the filters need cleaning. It works in 1.5 / 2
hour cycles and comes with an 18 m floating cable and height-adjustable suction nozzles to ensure it adapts
perfectly to any pool.
Max+ 5 Pro suction cleaner 60321 1 - -
In addition, the following filter kits can be acquired:

- Kit of 2 standard filters (code AS2802310).
- Kit of 2 coarse filters, which are ideal in winter or for pools with many leaves (code AS2802303).
219
Pulit Advance+ 3
The Pulit Advance+ 3 removes all dirt from pool bottoms in record time thanks to the Aquasmart electronic
control system and to the effective vibration cleaning brush that scrubs dirt off any surface. Characterised by
the most ergonomic top access filters on the market, you will be able to clean them easily without coming into
contact with the dirt. It comes with 18 m of floating cable and height-adjustable suction nozzles to ensure it
adapts perfectly to any environment. It works in 1.5/2 hour cycles and includes a LED indicator that shows
when the filter has to be cleaned.
Pulit Advance+ 3 suction cleaner 57340 1 - -
Pulit Advance+ 5
The Pulit Advance+ 5 removes all dirt from the bottom, walls and water line of pools in record time thanks to
the Aquasmart electronic control system and to the effective vibration cleaning brush that scrubs dirt off any
surface. Characterised by the most ergonomic top access filters on the market, you will be able to clean them
easily without coming into contact with the dirt. It works in 1.5/2 hour cycles, has 18 m of floating cable, a
LED indicator that shows when the filter has to be cleaned, a caddy, PVA brushes and height-adjustable suction
nozzles to ensure it adapts perfectly to any pool.

- Kit of 2 fine filters (code AS1051305).
220
Pulit Advance+ 7
The Pulit Advance+ 7 removes all dirt from the bottom, walls and water line of pools in record time thanks to
the Aquasmart electronic control system and to the effective vibration cleaning brush that scrubs dirt off any
surface. Characterised by the most ergonomic top access filters on the market, you will be able to clean them
easily without coming into contact with the dirt. It works in 1/1.5/2 hour cycles, has a remote control, a timer
system, an electronic swivel to avoid cable tangling, 18 m of floating cable, a LED indicator that shows when
the filter has to be cleaned, a caddy, PVA brushes and height-adjustable suction nozzles to ensure it adapts
POOL CLEANING
EQUIPMENT
Pulit Advance+ 7Duo
The Pulit Advance 7Duo removes all dirt from the floor, walls and waterline of pools in record time thanks to
the smart Aquasmart electronic control system and to the effective vibration cleaning brush that scrubs dirt off
any surface. Characterised by the most ergonomic top access filters on the market, you will be able to clean
them easily without coming into contact with the dirt. It works in 1.5/2/2.5 hour cycles, has a remote control,
a timer system, an advanced electronic cable swivel, 2 traction motors, various programs to adapt the cleaning
cycles to different types of pool, 23 m of floating cable, a LED indicator that shows when the filter has to be
cleaned, a caddy, PVA brushes and height-adjustable suction nozzles to ensure it adapts perfectly to any pool.
Pulit Advance+ 7Duo suction cleaner 57343 1 - -

221
Galeon FL
Electronic pool cleaner with the classic filtration bag. Delivers high quality filtration and has a great waste
storage capacity. The Galeon FL covers the whole of a pool floor in a 2.5-h cycle. It has 18 m of cable, PVC
brushes and high quality DC brushless motors (1 pump motor and 1 drive motor).
Galeon FL suction cleaner 53382 1 - -
Galeon MD
Electronic pool cleaner with the classic filtration bag. Delivers high quality filtration and has a great waste stor-
age capacity. The Galeon MD covers the whole of the pool floor, walls and waterline in a 3-h cycle. It comes
with a caddy, 18 m of cable, PVA brushes and high quality DC brushless motors (1 pump motor and 1 drive
motor).
Galeon MD suction cleaner 53383 1 - -
Galeon RC
Electronic pool cleaner with the classic filtration bag. Delivers high quality filtration and has a great waste stor-
age capacity. The Galeon RC covers the whole of the pool floor, walls and waterline. It works in 1/1.5/2-h cy-
cles, has a remote control, a caddy, 18 m of cable, PVC brushes and high quality brushless DC motors (1 pump
motor and 1 drive motor).
Galeon RC suction cleaner 53384 1 - -
222
New
Hurricane 3
The Hurricane 3 removes all dirt from pool bottoms in record time thanks to the Aquasmart electronic control
system and to the effective oscillating cleaning brush that scrubs dirt off any surface. Characterized by the
most ergonomic top access filters on the market, you will be able to clean them easily without coming into
contact with the dirt. Thanks to its transparent covers, it is easy to tell when the filters need cleaning. It comes
with 18 m of floating cable and two height-adjustable suction nozzles to ensure it adapts perfectly to any en-
vironment. It works in 1.5/2 hour cycles and includes a LED indicator that shows when the filter has to be
cleaned.
Hurricane 3 suction cleaner 57344 1 17.5 0.1173
New
Hurricane 5
The Huricane 5 removes all dirt from the bottom, walls and water line of pools in record time thanks to the
Aquasmart electronic control system and to the effective oscillating cleaning brush that scrubs dirt off any
surface. Characterized by the most ergonomic top access filters on the market, you will be able to clean them
easily without coming into contact with the dirt. Thanks to its transparent covers, it is easy to tell when the
filters need cleaning. It works in 1.5/2 hour cycles, has 18 m of floating cable, a LED indicator that shows when
the filter has to be cleaned, a caddy, PVA brushes and height-adjustable suction nozzles to ensure it adapts
Hurricane 5 suction cleaner 57345 1 - 0.1173

224
New
Hurricane 7
The Hurricane 7 removes all dirt from the bottom, walls and water line of pools in record time thanks to the
Aquasmart electronic control system and to the effective oscillating cleaning brush that scrubs dirt off any
filters need cleaning. It works in 1/1.5/2 hour cycles, has a remote control, a timer system, an electronic
swivel to avoid cable tangling, 18 m of floating cable, a LED indicator that shows when the filter has to be
cleaned, a caddy, PVA brushes and height-adjustable suction nozzles to ensure it adapts perfectly to any pool.
Hurricane 7 suction cleaner 57346 1 - 0.1173
POOL CLEANING
EQUIPMENT
New
Hurricane 7 DUO
The Hurricane 7Duo removes all dirt from the bottom, walls and water line of pools in record time thanks to
the Aquasmart electronic control system and to the effective oscillating cleaning brush that scrubs dirt off any
filters need cleaning. It works in 1.5/2/2.5 hour cycles, has a remote control, a timer system, an electronic
swivel to avoid cable tangling, 2 drive motors, various programs to adapt the cleaning cycle to different types
of pool, 23 m of floating cable, a LED indicator that shows when the filter has to be cleaned, a caddy, PVA
brushes and height-adjustable suction nozzles to ensure it adapts perfectly to any pool.
Hurricane 7 DUO suction cleaner 57347 1 - 0.1173

225
Automatic suction cleaners for commercial pools
New
Ultra 125
New pool cleaner for commercial pools up to 15 m. Cleans the floor, wall and waterline in a cycle of 3 h. It
includes 23 m of cable and high quality DC brushless motors (1 pump motor and 1 drive motor). The pump
capacity is 16.4 m3/h. It has 24 months of warranty.
Ultra 125 suction cleaner 60165 1 - -
POOL CLEANING
EQUIPMENT
New
Ultra 250
New pool cleaner for commercial pools up to 25 m. Cleans the floor, wall and waterline. With a gyroscope build
in ensures the total coverage of the pool surface. It has three different programs: 2 h (floor only), 4 h (floor and
wall), 5 h (floor and wall). Remote control, 3 meters of cable and a caddy. It has 3 high quality DC brushless
motors. The pump capacity is 16.4 m3/h. It has 24 months of warranty.
227
Automatic suction cleaners for commercial pools
New
Ultra 500
New pool cleaner Ultra 500 for commercial pools up to 25 m. Cleans the floor, wall and waterline. With a gy-
roscope build in ensures the total coverage of the pool surface. It has three different programs: 2 h (floor only),
4 h (floor and wall), 5 h (floor and wall). Remote control, 3 meters of cable and a caddy. It has 3 high quality
DC brushless motors. The pump capacity is 22 m3/h. It has 24 months of warranty which the first 12 months
are total warranty.
New
Ultramax Gyro
Pool cleaner specially designed for public pools of up to 50 m. The unit is made of resistant materials for the
toughest applications. Equipped with a gyroscope, it ensures the whole of the pool floor is covered. It includes
a programmable power source with different cleaning programs, a remote control, 36 m of cable and a stainless
steel caddy. Fitted with 4 high quality brushless DC motors, the pump's motor gives it a suction flow of 37.7
m3/h, the possibility of setting the length of the cycles (from 3 to 9 hours) and of delaying their start time.
Ultramax Gyro suction cleaner 60164 1 - -
228
Pool cleanes pumps
Ontario pump
The new multicelular pump has been especially designed for use with pool cleaning equipment, but it is also
suitable for domestic irrigation and domestic pressure applications. This small pump is manufactured in plas-
tic, and the metal parts coming into contact with water are made of AISI-316 Stainless Steel. It is fitted with
a high pressure, highly resistant pure graphite mechanical seal, making it ideal to withstand extreme working
conditions.
1.25 HP Ontario Pump 34396 1 7.8 0.049
POOL CLEANING
EQUIPMENT

Performance curves
45
40
35
30
H (m.w.h.)
25
20
15
10
0
2, 5 3 3, 5 4 4, 5 5 5, 5 6 6, 5 7
Q (m 3 /h)
Pool cleaner pump trolley

In anodized Aluminium pipe and plastic platform 460 mm x 370 mm. Accessories in S.S. AISI-304.
04648
1 8.06 0.12
229
Manual suction cleaners
Oval model - Shark

Manufactured in ABS with a brush made from polypropylene. This model features a hose connection with a
choice of two diameters ( 32-38 mm). With wing-nut or wishbone fixing.
With wing-nut or wishbone fixing 40997 1 - -
Oval model
With safety valve to limit suction.
With wishbone fixing 25788 1 - -
New
Flexible pool cleaner for liner pools - Basic Line
Flexible manual pool cleaner for liner pools. Handle with swivel system.
With wishbone fixing 38564 6 5.3 0.034
Flexible model - Shark

The perfect itern for cleaning small particles or sand from the pool bottom. Manufactured in hard-wearing
polyethylene (EVA), this model features a hose connection with a choice of two diameters ( 32-38). Weight is
injected (without caps) which, together with its great flexibility, ensures perfect pool floor cleaning.
New
Flexible model - Basic Line
Flexible articulated pool cleaner with 35-cm head, 8 wheels and side brushes. Handle with swivel system.
Triangular model - Shark

Triangular pool cleaner manufactured in ABS with a brush made from polypropylene. This model features a
hose connection with a choice of two diameters ( 32-38 mm). With wing -nut or wishbone fixing.
230
Manual suction cleaners
New
Triangular model - Basic Line
Transparent articulated pool cleaner. Handle with swivel system.
Articulated model
For concrete pools. Ideally designed for walls and corners. Brushes made of Polypropylene. 11/2 connection.
Made of unalterable plastic.
With wing-nut fixing 01349 1 1.0 0.007
Anodised aluminium vac-head
POOL CLEANING
EQUIPMENT
For wing-nut fixing:
350 mm for 11/2 hose 01353 4 11.8 0.04
450 mm for 2 hose 01354 4 15.5 0.06
450 mm for 11/2 hose 08661 4 15.5 0.06
For wishbone fixing:

350 mm for 11/2 hose 01355 4 11.8 0.04
450 mm for 2 hose 01356 4 15.5 0.06
Injected aluminium pool cleaner - Shark

Pool cleaner made of injected aluminium and plastic. Connections of 32-38 mm for 1 hoses.

Shark handle attachment by means of 41625 4 6.5 0.035
clip and bracket.
Double length metal vac-head

In polished anodized aluminium and chromed brass. 2 connection, length 800 mm. Telescopic handle and
cable models (cable not included). The float line cable 00210 can be used.
Trailed via cable 01357 1 13.0 0.03

Touse with handle with wing-nut fixing 16601 1 10.2 0.03
Anodised aluminium and chromed brass vac-head

Inner connection for 11/2" hose and outer for 2" hose. S.S. connecting fork. Wing-nut fixing. Lenght 442 mm.
01358 4 13.6 0.05
231
Handles
Connection system CLIP CLIP - WING NUT WING NUT

Code 01365 38422 38423 38424 38425 01359 01360 01361 01362 01363 01364 15838 A
A 1.8 2.4 2 2.5 2 2.5 2.5 5 6.5 3.75 B
B 2.5 3.6 4.8 4 5 4 5 5 10 13 2.5 7.5
Normal
Telesc.
Reinforced
FIXED
A
B
For wing-nut fixing

Aluminium fixed length 2.5 m.
01364 20 11.4 0.06
For wishbone fixing

Aluminium fixed length 2.5 m.
01365 12 10.2 0.06
Telescopic poles for wing-nut fixing

Aluminium, telescopic 2 - 4 m 01359 12 13.4 0.05
Aluminium, telescopic 2.5 - 5 m 01360 12 16.2 0.06

Telescopic poles for wing-nut or wishbone fixing - Shark

From 1.8 m up to 4.8 m.
Aluminium, telescopic 1.8 - 3.6 m 38422 10 11.7 0.05
Aluminium, telescopic 2.4 - 4.8 m 38423 10 14.4 0.06
Telescopic poles for wing-nut or wishbone fixing - Shark

From 2 m to 5 m.
Aluminium, telescopic 2 - 4 m 38424 12 13.6 0.05
Aluminium, telescopic 2.5 - 5 m 38425 12 16.4 0.06
For wing-nut connection - reinforced, telescopic

Reinforced, telescopic 5 m in aluminium 01361 5 16.0 0.04
Reinforced, telescopic 7.5 m in aluminium 15838 1 6.0 0.01
232
Handles
Handle adapter
For converting wing-nut fixing system to wishbone fixing system.
Adapts the wishbone connection

handle to wing nut 14592 48 3.36 0.012
Adapts the wing nut connection
handle to wishbone 08465 35 2.55 0.011
Adapts the reinforced wing nut
connection handle to wishbone 17937 38 2.66 0.012
Suction hoses
Hose connectors
POOL CLEANING
EQUIPMENT
38 mm for connections to inlets 16328,
16329, 16330, in white ABS 05684 12 1.0 0.003
50 mm connections to inlets 00315,
grey PP 01392 12 1.0 0.006
Hose fitting
White ABS plastic.
For 38 mm hose, male thread 11/2 01393 12 1.0 0.006
Hose cuffs

Made in blue PVC
For 38 mm (01372) hose
Only for vac inlets 24415 07958 12 2.0 0.003
For 38 mm hose (01372) 01385 12 2.0 0.003
For 50 mm hose (01373) 01386 12 3.0 0.010
Made in flexible white PVC
For 38 mm hose (01374-01375
01376-01377-01378) 01387 12 2.0 0.030
For 50 mm hose (01379) 01388 12 3.0 0.010
Floating suction hose

Transparent blue Polyethylene hose.
38 mm (11/2) 01372 30 m 8.0 0.108
50 mm (2) 01373 30 m 14.0 0.192
233
Suction hoses
Floating suction hose

Blue plastic. Includes connecting cuffs., except in the 30 m hose (01374, 01379).
38 mm (11/2)
30 m 01374 1 12.0 0.192
15 m 01375 1 5.6 0.192
12 m 01376 1 4.5 0.192
10 m 01377 1 3.0 0.192
8 m 01378 1 3.0 0.192
50 mm (2)
30 m 01379 1 15.0 0.240
Leaf skimmers
Deep water leaf skimmer - Shark

Manufactured in blue Polypropylene. The Polyester net is welded to the skimmer frame, ensuring greater
strength. Its long design maximises collection along the float line.
New
Deep water leaf skimmer - Basic Line
Made of nylon net welded to the plastic skimmer frame.
With wishbone fixing 38598 12 5 0.080
Water surface leaf skimmer - Shark

Manufactured in blue Polypropylene. The Polyester net is welded to the skimmer frame.
New
Water surface leaf skimmer - Basic Line
Made of nylon net welded to the plastic skimmer frame.
234
Brushes
Straight Brush 180 mm

With handle .
09456 14 6.1 0.177
Straight brush 165 mm

Stainless Steel bristles with Aluminium support.
Hand held brush

White Polypropylene support and black bristles. Ideal for water line cleaning.
11789 20 3.5 0.027
POOL CLEANING
EQUIPMENT
Pool bottom brush - Shark
Ideal for cleaning the pool floor, due to its large size and special design.
Wall brush - Shark

The angle between the bristles and the handle has been reduced in order to make a brush which adapts to the
pool wall, allowing effort-free cleaning.
New
Curved wall brush - Basic Line
45 cm long. Nylon bristles.
With wishbone fixing 58644 12 3 0.034
Pool corner suction brush - Shark

Especially designed for pool corners, this brush features a practical connection to a suction hose.
235
Brushes
New
Brush for waterline - Basic Line
Hand brush ideal for cleaning the waterline.
58647 24 1.8 0.023
New
Pool corner brush - Basic Line
Specially designed for pool corners. Screw-on handle.
58648 1 - -
Thermometers
Thermometer - Shark
Both models feature a float at the top of the thermometers, allowing for accurate pool water temperature meas-
urement. Readings are easy to get, without the need to remove the thermometer from the water.
Analogical model: measures water temperature in both C and F.
Analogical model 36622 1 - -
Floating cylindric thermometer

Celsius & Fahrenheit scale.
20594 20 2.1 0.032
New
Submersible cylindric thermometer - Basic Line
58656 12 3 0.109
236
Thermometers
New
Floating thermometers ZOO - Basic Line
Duck model 38613 24 3.5 0.049
Seal model 58650 24 3.5 0.049
Cocodrile model 58651 24 3.5 0.049
Dolphin model 58652 24 3.5 0.049
Frog model 58653 24 3.5 0.049
Whale model 58654 24 3.5 0.049

Cleaning kits
New
POOL CLEANING
Basic cleaning kit - Basic Line
EQUIPMENT
Basic cleaning kit 58660 6 8 0.123
Comprising
- 1 flat leaf skimmer
- 1 basic pH & chlorine test kit
- 1 floating dispenser
- 1 wall brush (25 cm)
- 1 suction pool cleaner kit
- 1 telescopic handle (D 20 mm, 3 x 50cm)
New
Advance cleaning kit - Basic Line

Advance cleaning kit 38610 6 10.5 0.106
Comprising
- 1 flexible pool cleaner
- 1 flat leaf skimmer
- 1 curved wall brush (45 cm)
- 1 thermometer
New
Premium cleaning kit - Basic Line

Premium cleaning kit 58661 6 16.5 0.176
Comprising
- 1 curved wall brush (45 cm)
- 1 deluxe thermometer
- 1 triangular pool cleaner
- 1 hose holder with screws
- 1 aluminium leaf skimmer (PP net)
237
Pool lighting &
ornamental features
Pool lighting &

ornamental
features
242 LED lighting

250 LED control systems
253 Halogen lights
258 Halogen lights for fountains and ponds
258 Lamps for halogen lights
259 Connection boxes
260 "Aquarmony" underwater musical system
& ornamental
Pool lighting
features
239
Pool lighting &
ornamental features
Pure White
LumiPlus
Design
Quality and
efficiency
delivered in the
very best design
A new lighting solution that draws on the
most innovative design, uses the highest
quality material available and is
manufactured using the most efficient
LED technology.
LumiPlus Design is available in RGB, white
and RGB-DMX, and is compatible with all
Inox effect LumiPlus Eco, Top, DMX and LED APP
control systems. LumiPlus Design lighting
comes with a 2.5-metre, two-wire
removable cable.
LumiPlus Design is first ever range of
underwater spotlights made using in-mould
decoration technology. They are available in
a pure white or stainless steel finish. Niches
240 must be purchased separately.
Pool lighting &
ornamental features
LED lighting
The LumiPlus by LEDs lighting system provides the colour ambience that you desire at each moment for your pool or
aquatic installation. It is made up of the LED light, the remote control, a reception terminal and a transformer which
are supplied separately.
The LEDs have a lifespan of 100,000 h compared to the 1,000 h of conventional lamps and each LED projector
results in a saving of more than a 90% in electricity consumption.
The LED light incorporates LEDs of maximum luminosity in red, blue and green. The combination of these basic co-
lours gives place to an infinity of different colours, all very bright and vivid.
For new-build pools, either concrete, pre-fabricated or panelled, you can choose among several models.
For an existing installation it is not necessary to change the transformer or the wiring. The current niche can be reu-
sed by changing the conventional lamp for a LED light without niche or for a PAR 56 lamp, in any kind of pool.
The LED lights Jelly, LumiPlus PAR56, S-Lim, Mini, Micro, Standard for Fountains, Linear and Mini Quadraled
are supplied with a 2.5 m cable. The par56 lamps which are supplied without cable.
The LumiPlus range has 3 different lighting control systems:
LumiPlus RGB ECO - Economical connection system which incorporates a N/C switch and a safety transformer.
With each button press, the colour or the program are changed. It offers a range of 7 colours and 7 colour-change
sequences.
LumiPlus RGB TOP - Based on the LumiPlus modulator, which extends the number of colours and sequences.
You can turn the projector on and off, change its 12 colours and 8 sequences, the speed of the sequences and
the timing of the shutdown.
The modulator has an antenna with a range of 50 m which receive the LumiPlus remote control signal.
LumiPlus RGB DMX - For total & accurate control of lighting, allows the use of lights with DMX adaptation
and DMX control, allowing the control of all the lightning sequences independently, achieving more than
16,000.000 colours and millions of sequences.
New
LumiPlus Design 12V AC - 50 Hz - IPX8
New lighting solution focused on innovative design, high quality and made with more efficient LED technology.
& ornamental
Pool lighting
features
LumiPlus Design is available in RGB, White and RGB-DMX, compatible with all LumiPlus control systems Eco,
Top, DMX and LED APP. LumiPlus Design is supplied with a replaceable cable of 2 wires and a length of 2, 5
m. LumiPlus DESIGN are the first underwater lights made by IMD technology and are offered with finishes Pure
and Inox Effect. Niche must be purchased separtely.
RGB light
RGB; Finnish: Inox effect SEA 59801 4 - -
RGB; Finnish: Pure white SEA 59803 4 - -
RGB-DMX; Finnish: Inox effect SEA 59809 4 - -
RGB-DMX; Finnish: Pure white SEA 59811 4 - -
WHITE light
Finnish: Inox effect SEA 59805 4 - -
Finnish: Pure white SEA 59807 4 - -
NICHE LumiPLus Design

For concrete pools 59813 4 - -
For prefabricated pools with inserts 59814 4 - -
For prefabricated pools "auto-thread" 59815 4 - -
Competitors fixation kit

Fixation kit for non-LumiPlus Design niches 59818 16 - -
NOTE: LumiPlus Design is comparible with most of market niches from 180 to190 mm ( Hugo Lahme, MTS
Produckts, WIBRE).
241
Pool lighting &
ornamental features
LED lighting
LumiPlus PAR56 2.0 70W - 12V AC 50Hz IPX8

New range of LED lights which have evolved from the LumiPlus range. The LumiPlus 2.0 light offers 3 times
higher light intensity and greater energy efficiency. The LumiPlus 2.0. The increase of the luminosity opti-
mizes the installations. For DMX installations a modulator 41107 must be used. A Standard niche must be
purchased separately in order to complet a projector serie LumiPlus or Global.
RGB LIGHT. Lamp PAR56 2.0 (2544 lumens)

Lamp PAR56 RGB 2.0 43411 6 7.50 0.015
Lamp PAR56 RGB DMX 2.0 45637 6 7.50 0.015
LED without niche PAR56 2.0 (2544 lumens)
For fixing to a standard niche, faceplate in ABS 45619 4 10.60 0.069
For fixing to a standard niche, faceplate in S.S. 45620 4 12.20 0.069
DMX light for fixing to a std. niche, faceplate in ABS 45640 4 10.60 0.069
DMX light for fixing to a std. niche, faceplate in S.S. 45641 4 12.20 0.069
Global fixing, faceplate in ABS SEA 53841 4 10.60 0.069
DMX. Global fixing, faceplate in ABS SEA 53843 4 10.60 0.069
WHITE LIGHT. Lamp PAR56 2.0 (4320 lumens)

White lamp PAR56 2.0 43412 6 7.50 0.015
Light without niche PAR56 2.0 (4320 lumens)
For fixing to a standard niche, faceplate in S.S. 45622 4 12.20 0.069
NICHES
Standard niche for concrete pools SEA 00349 6 4.66 0.069
Standard niche for concrete pools with inserts 00364 6 6.24 0.069
Standard niche for panel pools with inserts 23671 4 8.88 0.069
Standard niche for panel pools without inserts 23670 4 8.88 0.069
Global fixing System

New range of LumiPLus, for all type of pools (included sea water), is manufactured in plastic. The screws and
anchors are also made in plastic material, and they are compatible with all Astralpool niches as well as with
all niches with a diameter from 223 mm to 235 mm from the market.A niche mist be purchased separately.
Suitable for sea water.
LumiPlus S-Lim 2.11 12V AC 50Hz IPX8

New S-Lim proyector LED 2.11 of reduced dimensions and a flat front design providing a better distribution of
light in the pool. For DMX installations a modulator 41107 should be used. Niche installation is not required.
RGB LIGHT (70 W - 2544 lumens)
Concrete pool / ABS face plate SEA 56010 6 9.20 0.035
Concrete pool / S.S. face plate 56011 6 9.20 0.035
Prefabricated pool / ABS face plate SEA 56012 6 9.30 0.035
Prefabricated pool / S.S. face plate 56013 6 9.30 0.035
DMX Concrete pool / ABS face plate SEA 56014 6 9.20 0.035
DMX Concrete pool / S.S. face plate 56015 6 9.20 0.035
DMX Prefabricated pool / ABS face plate SEA 56016 6 9.30 0.035
DMX Prefabricated pool / S.S. face plate 56017 6 9.30 0.035
WHITE LIGHT (70 W - 4320 lumens)
242
Pool lighting &
ornamental features
& ornamental
Pool lighting
features
Wireless
LED RBG 1.11 technology with
12 different colours 8 sequences remote control.
Built-in movement sensor
Brighten up
your pool
The wireless LumiPlus PAR56 RGB
1.11 delivers all of the features of
RGB lighting in a single product.
Colour selection Sequence selection Easy to install, the wireless LED RGB
1.11 lamp has a receptor so there is
no need to install an external
modulating system.
Installing the wireless LED RGB 1.11

lamp will reduce installation costs
by over half*.
*Compared with the installation of a LED RGB

1.11 lamp and modulating system.
243
Pool lighting &
ornamental features
LED LIGHTING
LumiPlus PAR56 1.11 12V AC 50Hz IPX8

New range of LED lights which have evolved from the Lumiplus range. LumiPlus RGB PAR56 1.11 achieves
power consumption reduction of 40% over the previous version. New LED RGB 1.11 is launched in ABS plas-
tic or stainless steel plates. For DMX installations a modulator 41107 should be used. A standard niche must
be purchased separately.
RGB LIGHT
Lamp PAR56 1.11 (35 W - 1100 lumens)
Lamp PAR56 1.11 RGB 56001 6 7.50 0.015
Lamp PAR56 1.11 RGB DMX 56002 6 7.50 0.015
For fixing to a standard niche, faceplate in S.S 56004 4 12.20 0.069
DMX light for fixing to a std. niche, faceplate in ABS 56005 4 10.60 0.069
DMX light for fixing to a std. niche, faceplate in S.S. 56006 4 12.20 0.069
DMX. Global fixing, faceplate in ABS SEA 53842 4 10.60 0.069
WHITE LIGHT
Lamp PAR56 1.11 (24 W - 1485 lumens)
Lamp par56 1.11 White 52596 6 7.50 0.015
For fixing to a std. niche, faceplate in S.S. 52600 4 12.20 0.069
NICHES
Standard niche for concrete pools SEA 00349 6 4.66 0.069
Standard niche for concrete pools with inserts 00364 6 6.24 0.069
Standard niche for panel pools with inserts 23671 4 8.88 0.069
Standard niche for panel pools without inserts 23670 4 8.88 0.069
New
LumiPlus PAR56 1.11 RGB Wireless 37W 12V AC 50Hz IPX8
New range of lights with remote control RGB LED LumiPlus Motion Control, They can directly select from 12
colors and 8 sequences and sequence speed. Needs no modulator. With this new range of lights you will get
the same savings and life like the rest of Astralpool LumiPlus products. Supplied with kit of 1 or 2 lights or
bulbs. Light supplied without niche.
Kits Bulbs PAR56 1.11 RGB
(1100 lumens)
Kit 1 - 1 bulb PAR56
+ 1 LumiPlus Control Motion 59126 407.00 10.00 0.044
Kit 2 - 2 bulbs PAR56
+ 1 LumiPlus Control Motion 59127 684.00 12.20 0.044
Kits Light without niche PAR56 1.11 RGB

(1100 lumens)
Kit 1 - 1 Light for fixing to STD niche,
faceplate in ABS + 1 LumiPlus Control Motion 59128 451.00 10.60 0.069
Kit 2 - 2 Lights for fixing to STD niche,
faceplate in ABS + 1 LumiPlus Control Motion 59129 783.00 6.00 0.040
244
Pool lighting &
ornamental features
LED LIGHTING
LumiPlus S-Lim 1.11 12V AC 50Hz IPX8

New projector LED S-Lim 1.11 of reduced dimensions and a flat front design provides a better distribution of
light in the pool. This new range, the RGB version is reduced by 40% in electricity consumption over the previ-
ous range. For DMX installations a modulator 41107 should be used. Niche installation is not required.
RGB LIGHT (35 W - 1100 lumens)

DMX Concrete pool / ABS face plate SEA 56026 6 9.20 0.035
DMX Concrete pool / S.S. face plate 56027 6 9.20 0.035
DMX Prefabricated pool / ABS face plate SEA 56028 6 9.30 0.035
DMX Prefabricated pool / S.S. face plate 56029 6 9.30 0.035
WHITE LIGHT (24 W - 1485 lumens)

LED lights in stainless steel
& ornamental
Pool lighting
Completly LED projector range in stainless steel AISI-316 and supplied with 2.5 m cable. Threaded gland
features
connection PG16 with converter PG16 to M25. Rim screwed directly to niche with screws. To complete project
installation, niche is necessary to be acquired separetly.

Light without niche PAR56

250 mm faceplate
LED BULB 2.0 PAR56 70W
2.0 RGB (2544 lumens) 54092 1 2.37 0.013
2.0 White (4320 lumens) 54093 1 2.37 0.013
LED BULB 1.11 PAR56 12V AC 50 Hz IPX8

1.11 RGB (1100 lumens - 35W) 54094 1 2.37 0.013
1.11 White (1485 lumens - 24W) 54095 1 2.37 0.013
Light without niche PAR56

295 mm faceplate
LED BULB 2.0 PAR56 70W 12V AC 50 Hz IPX8
2.0 RGB (2544 lumens) 54097 1 2.60 0.020
2.0 White (4320 lumens) 54098 1 2.60 0.020
LED BULB 1.11 PAR56 12V AC 50 Hz IPX8

1.11 RGB (1100 lumens - 35W) 54099 1 2.60 0.020
1.11 White (1485 lumens - 24W) 54100 1 2.60 0.020
Niche for Concrete pool 54102 1 1.72 0.013

Niche for liner pool 54103 1 2.16 0.013
245
Pool lighting &
ornamental features
LED LIGHTING
New
LumiPlus Mini 3.13 12V AC 50Hz IPX8
New family of projectors with higher light intensities and greater energy efficiency. The new family facilitates
its installation in different formats of swimming pools, the universal spotlight is suitable for installation in 63
mm tubes (i PN6 PN10), threaded connections 1 "1/2, and the niche 59979; LumiPlus Mini 3.13 for Spas
and prefabricated pools can be installed to any 2 "connection. The whole product line is compatible with all
lighting controls LumiPlus, Eco, Top, DMX and LED APP LumiPlus. They are supplied with replaceable cable
of 2 wires with a length of 2.5 m. In DMX installations must be connected to 52142 DMX power. For certain
installations, LumiPlus MINI 3.13 requires niches 53956 or 59983; they must be purchased separately.
RGB LIGHT
RGB universal spotlight 59971 4 - -
RGB universal spotlight / S.S. Finish 59972 4 - -
RGB for spas and prefabricated pools 59973 4 - -
RGB for spas and prefabricated pools / S.S. Finish 59974 4 - -
DMX universal spotlight 59975 4 - -
DMX universal spotlight / S.S. Finish 59976 4 - -
DMX for spas and prefabricated pools 59977 4 - -
DMX for spas and prefabricated pools / S.S. Finish 59978 4 - -
WHITE LIGHT
Universal spotlight 59979 4 - -
Universal spotlight /S.S. Finish 59980 4 - -
For spas and prefabricated pools 59981 4 - -
For spas and prefabricated pools / S.S. Finish 59982 4 - -
Prefabricated pool niche 59983 6 5.00 -

Prefabricated pool niche / S.S. Finish 60229 6 - -
Spas / Prefabricated
Pool type Concrete pools Liner pools Prefabricated pools
pools
Installation - Tube 63 PN6 /
Niche Niche Thread 2" Thread 1" 1/2
connections PN10
59971 59971 + 53956 59971 + 59983 59973 59971

RGB
59972 59972 + 53956 59972 + 59983 59974 59972
RGB- 59975 59975 + 53956 59975 + 59983 59977 59975
LIGHT
DMX 59976 59976 + 53956 59976 + 59983 59978 59976
59979 59979 + 53956 59979 + 59983 59981 59979
WHITE
59980 59978 + 53956 59978 + 59983 59982 59980
246
Pool lighting &
ornamental features
LED LIGHTING
LumiPlus Mini 2.11 12V AC 50Hz IPX8

Range of LumiPlus Mini LED 2.11 with higher intensity than the old model and better eficiency. All Minis,
RGB, RGB DMX and white light are supplied with 2 wire-cable H07RN-F 2.5 meters lenght and can be con-
nected directly to 12 V AC. Easy installation.Mini LED RGB and RGB DMX have a consumption of 5.5W, and
Mini LEDs white light consume 9W. In DMX installations the DMX Power Supply 52142 is required. The niche
must be purchased separately.
RGB LIGHT (186 lumens)
ABS faceplate, quick connection to 63 conduit 52124 4 6.08 0.009
S.S. faceplate quick connection to 63 conduit 52125 4 6.08 0.009
For spas and prefab. pools, ABS faceplate 52126 4 5.20 0.009
For spas and prefab. pools, S.S. faceplate 52127 4 5.20 0.009
Without niche, ABS faceplate 52128 4 6.50 0.022
Without niche, S.S. faceplate 52129 4 6.50 0.022
DMX, quick connection to 63 mm conduit, ABS faceplate 52136 4 6.08 0.009
DMX, quick connection to 63 mm conduit / S.S faceplate 52137 4 6.08 0.009
DMX, For spas and prefab pools, ABS faceplate 52138 4 5.20 0.009
DMX, For spas and prefab pools, S.S faceplate 52139 4 5.20 0.009
DMX, without niche, ABS faceplate 52140 4 6.50 0.022
DMX, without niche, S.S faceplate 52141 4 6.50 0.022
WHITE LIGHT (315 lumens)

Quick connections, wall conduit 63 52130 4 6.08 0.009
Quick connections, wall conduit 63 /
Faceplate in S.S. 52131 4 6.08 0.009
For Spa's and prefabricated pools 52132 4 5.20 0.009
For Spa's and prefabricated pools /
Faceplate in S.S. 52133 4 5.20 0.009
Projector for niche 52134 4 6.50 0.022
& ornamental
Pool lighting
Projector for niche / faceplate in S.S. 52135 4 6.50 0.022
features
New
Niche for LumiPlus Mini - quick installation
Quick installation niche for MINI projector for concrete pools. New niche is suitable for LED and halogen light-
ing. Its the perfect solution to install in the pool stairs. New niche allows the lamp to be changed easily thanks
to the considerable length of cable which can be stored in the back of the niche. Shotcrete
thickness can be adjusted.
Code Standard Standard Standad
Niche for concrete pools 53956 37.00 4.34 0.054
Niches for LumiPlus Mini

Niche for concrete pools 06967 4 4.20 0.022
Niche for prefabricated pools 00369 4 4.20 0.022
Niche for panel pools 49828 4 4.20 0.022
Wall conduit concret pools for Projectors

quick connection 59.3 m 15661 15 4.2 0.040
Front 59.3 mm solvent internal for returns

suitable for gluing in to quick connections MiniLEDs 15660 15 5.6 0.040
247
Pool lighting &
ornamental features
LED LIGHTING
LumiPlus Micro 12V AC 50Hz IPX8

Available with RGB (colours) or White. Quick connections for pools and spas. The RGB has a consumption of
5 W and must be installed with control unit 32640. For DMX installations a 41106 is to be used. White lights
have a consumption of 9 W and can be connected to a 12 V transformer.
RGB LIGHT
Quick connection / with face plate ABS 38815 4 4.7 0.009
Quick connection / with face plate S.S. 38817 4 4.7 0.009
For spas / with face plate ABS 35275 4 4.7 0.009
For spas / with face plate S.S 35276 4 4.7 0.009
WHITE LIGHT
Quick connection / with face plate ABS 38814 4 4.7 0.009
Quick connection / with face plate S.S 38816 4 4.7 0.009
For spas / with face plate ABS 40765 4 4.7 0.009
For spas / with face plate S.S 40766 4 4.7 0.009
LumiPlus Standard for Fountains 12V AC 50Hz IPX8

LED RGB or White light. They must always be installed fully submerged in water. Can be adjusted to face anny
direction. If a DMX installation a 41107 is to be used.
Lumiplus 1.11
RGB (35W - 1100 lumens) 56008 4 11.79 0.086
RGB DMX (60W - 1116 lumens) 56009 4 11.79 0.086
WHITE light (24W - 1485 lumens) 52607 4 11.79 0.086
Lumiplus 2.0 New

RGB (70W - 2544 lumens) 45635 4 11.79 0.086
RGB DMX (70W - 2544 lumens) 45648 4 11.79 0.086
WHITE light (70W - 4320 lumens) 45636 4 11.79 0.086
Starlight wireless LED lights

Rechargeable wireless LED lighting for indoor and outdoor use. Even floats on water surfaces. An infrared
remote control to colour changing mode is included. Choice of 16 different colours. StarLight works with a
low-consumption LED technology. Battery lasts until 20 hours. Charger is supplied with product.

StarLight Altair
Oval shape 290 x 320 mm 53937 1 3 0.050
StarLight Sirio
Circle shape 350 mm 53938 1 3 0.051
StarLight Vega
Oval shape 350 x 270 mm 53939 1 3 0.051
New
Decorative portable lamps
Decorative ambient lighting that can be placed wherever you wish, both indoors and outdoors. They work on
low consumption LED technology and once the battery has been charged, they have a runtime of up to 24
hours. Resistant to water and UV radiation.
Kubic model. Non-floating. 107005E 1 - 370 x 370 mm
248
Pool lighting &
ornamental features
LED LIGHTING
Brick LED lights

The new range of Brick LED lights designed for decoration. Intended to illuminate paths, gardens, etc.
Compatible with the lumiplus modulator and remote control. The lights consist of a glass body with anti-vandal
resistance, sealed to ensure a wateright IP68. Comes with a galvanized steel niche for easy installation. The
RGB projector has 3 LEDs: one red, one green and one blue.

Brick Light LED RGB Square 45716 4 8.25 0.047
Brick Light LED RGB Round 45717 4 8.25 0.047
& ornamental
Pool lighting
features
Linear Spotlight 12V AC 50Hz IPX8
Spotlight specially designed to install in fountains, waterfalls or water facilities, gardens, building and walls
lighting, etc. Available in lenghts of 50 cm and 100 cm. It rotates 210. Suitable for bathroom walls. DMX
spotlights with DMX modulator 41107 are required in DMX installations.
Made of aluminium with anti-rust finish and supplied with 3m of cable, plugs and screws for fixing to the floor.
RGB LIGHT
Linear 50 cm 41636 1 5.28 0.031
Linear 100 cm 41627 1 8.00 0.031
Linear 50 cm. DMX 41638 1 5.28 0.031
Linear 100 cm. DMX 41629 1 8.00 0.031
WHITE LIGHT
Linear 50 cm 41637 1 5.28 0.031
Linear 100 cm 41628 1 8.00 0.031
249
Pool lighting &
ornamental features
LED control systems
Mini Quadraled 12V AC 50Hz IPX8

Customised lighting in water and outdoor facilities.
New lighting using LED technology for any type of water or outdoor facility. The Mini Quadraled is an ideal
outdoor spotlight. They can be installed indoors or outdoors and submerged in fresh water. They can be used
to create custom-lit environments of either one fixed colour or an automatic sequence of colours. They can be
synchronised with the AstralPool LumiPlus range of lighting products.
RGB, white light and RGB DMX versions with the possibility of projecting one fixed colour or an automatic
sequence of colours in the case of the RGB range.
The Mini Quadraled is available in versions with 1, 2, 3 or 4 rotating spotlights.
In the case of white light floodlights, the connection is made through a safety transformer with a 12 V AC
output. In the case of RGB and DMX lights, the connection is made through feeders, code numbers 32640
and 41106 respectively.
RGB LIGHT
Mini Quadraled 1 Lens 52143 1 1.60 0.021
DMX. Mini Quadraled 1 Lens 52151 1 1.60 0.021
WHITE LIGHT
LEDs PAR38 lamp 40W - 12V AC 50Hz IPX8

LED Lamp with E27 thread. Should always be totally submerged in water.
White LED lamp 37661 6 3.70 0.013
Colorplus ECO
An inexpensive connection system thanks to the N/C switch. Maximum power input of 700 VA. The trans-
former must be adapted to the number of lights fitted and their consumption. For example, if you have to feed
four 70-W projectors, you will need a 300-W transformer. There must be an output of 12V AC at all times.
Every time the button is pressed, the colour of the lamps or their sequence changes. The range comes in 7
colours and with 7 colour sequence programs.
32458 1 0.54 0.002
250
Pool lighting &
ornamental features
LED control systems
Colorplus TOP
LumiPlus receiver-module which expands the number of colours and sequences of the lights. You can control
the lights on and off, change 12 colours and 8 sequences, the speed of the sequences and timing of the
shutdown.
The module has an antenna with a range of 50m which receives the signal from the LumiPlus remote control.
A control unit is necessary for lights RGB Mini, Micro and Mini Quadraled. It controls up to 4 units and includes
a transformer.
Receiver-module for LumiPlus 27818 12 5.50 0.029
Remote Control for LumiPlus 41988 24 4.80 0.029
Power pack for LumiPlus Micro 32640 10 3.46 0.021
& ornamental
Pool lighting
Colorplus DMX
features
Control system makes it possible to create lighting scenes in fountains and large aquatic areas, by singling
out lights individually or in groups. Total control system lighting by means of a PC or through a programmable,
autonomous module.
Includes the Astral DMX module (USB-DMX interface) and intuitive software, which gives the user total control
over a projector or group of projectors. Makes it possible to choose a desired colour from among more than
16 million colours. The system is the ideal solution for creating practically indefinite scenes with spectacular
results.
Two Systems available: the Astral DMX that controls lighting and the Astral DMX Pro that controls lighting and
synchronizes light and music.
Software / controller Astral DMX 41329 1 0.46 0.0035
Software / controller Astral DMX Pro
(allows synchronization with music) 41330 1 0.46 0.0035
DMX power supply
(For lights Mini, Micro and Quadraled) 41106 1 1.40 0.0065
Quadraled LED RGB DMX
light 2.0 - controls upto 9 lights 52142 1 0.40 0.0018
Modulator DMX
(For LumiPlus range and Linear) 41107 1 0.40 0.0018
DMX touch screen 51297 1 0.40 0.0050
NOTE: all LED spotligts described previously can be included in a DMX installation, as long as they have DMX
extensin, except from Mini, Micro o Mini Quadraled that must simply be RGB. Mini Quadraled must be con-
nected to DMX 41106 power supply.
251
Pool lighting &
ornamental features
LED control systems
New
LumiPlus LED app
Application to control any LumiPlus lamp or projector from smartphones / tablets with Android or Apple iOS
(iPhone / iPad). If the pool has a LumiPlus Modulator (ref. 27818) by connecting the LumiPlus Wifi Access
Point to it and downloading the LumiPlus LED app you could control any LumiPlus lamp or light through your
smartphone or tablet.
The free application can be donwload directly from the QR code or the following addresses by OS:
Apple: www.lumiplusled-ios.astralpool.com
Android: www.lumiplusled-android.astralpool.com
LumiPlus Wifi access point 59131 264.00 0.50 0.0065
Modulator LumiPlus Wifi access point
230 V AC 59132 551.00 0.50 0.0065
QR code to download QR code to download

Apple app Android app
Underwater connection kit

The kit has all the necessary components to carry out any watertight connection. Due to the properties of the
product, the resin seals all gaps. Maximum safety, easy installation, in 2 hours it is ready to be submerged.
Kit for 13 to 15 mm cables 32803 1 0.3 0.002

Kit for 8 to 12 mm cables 35661 1 0.3 0.002
252
Pool lighting &
ornamental features
Halogen lights
Standard light
Supplied with niche for embedding into the pool wall. Manufactured in PS plastic. PAR 56 300 W-12 V halo-
gen lamp. The niche allows the option of a cable to pass through the side or the back, with M-25 threads. The
standard light is supplied without a transformer.
PREFABRICATED POOLS
Without cable
With white ABS faceplate 07838 4 8.60 0.072
With blue ABS faceplate 07838CL071 4 8.60 0.072
With 2.5 m cable of 2x6 mm2

USA version 06645 4 - -
PREFABRICATED POOLS
Supplied with niche, adhesive gaskets, ABS flange and screws. Housing made of Polypropylene + fibreglass.
300 W, 12 V bulb. On special order S.S. flanges can be supplied.
Without cable
With 2.5 m cable of 2 x 6 mm2

& ornamental
Pool lighting
features
NICHES
CONCRETE POOLS:
For embedding into the pool wall. Manufactured in PS plastic. Allows the option of a cable to pass through the
side or the back with M-25 threads. Niches for the Standard lights (codes 07837,07838, 07843 and 07844).
These niches are provided without cable.
00349 6 4.66 0.068
PREFABRICATED POOLS:
With flange, adhesive gaskets and screws. ABS flange. Supplied with M-25 gland packing. On special order
S.S. flanges can be supplied.
ABS housing with metallic inserts 00364 6 6.24 0.069
CONCRETE PREFABRICATED
253
Pool lighting &
ornamental features
Halogen lights
Global underwater light

New range of LumiPLus, for all type of pools (included sea water). Manufactured in plastic. The screws and
anchors are also made in plastic material, and they are compatible with all Astralpool niches as well as with
all niches with a diameter from 223 mm to 239 mm from the market.A niche mist be purchased separately.
Suitable for sea water.

Light 52608 4 8.60 0.069
Adjustable Light
CONCRETE POOL
The lens may be angled up to 15 in any direction. White ABS faceplate. PAR 56 300W-12V halogen lamp,
IP-68 Protection and H07 RN-F 2.5 metre long cable.
33033 1 3.7 0.029
PREFABRICATED POOL
The lens may be angled up to 15 in any direction. Niche for prefabricated and panel pools. White ABS face-
plate. PAR 56 300W-12V halogen lamp, IP-68 Protection and H07RN-F 2.5 metre long cable.
Parker Model 33034 1 3.7 0.029
For Parker model panel pools 33035 1 3.7 0.029
Niche with inserts 33067 1 3.7 0.029
For panel pools, niche with inserts 33068 1 3.7 0.029
254
Pool lighting &
ornamental features
Halogen lights
Stainless Steel underwater light

Totally in S.S. AISI-316 supplied with 2.5 m cable and PG16 threaded gland connection with PG16 to M25
converter. Rim screwed directly to niche with screws. Niche must be purchased separately.
Projector without niche

250 mm faceplate
PAR56 300W 12V AC 50 Hz IPX8 54096 1 2.37 0.013
Projector without niche
290 mm faceplate
PAR56 300W 12V AC 50 Hz IPX8 54101 1 2.60 0.020
Niche for concrete pool 54102 1 1.72 0.013
Niche for liner pool 54103 1 2.16 0.013
250 mm 295 mm
& ornamental
Pool lighting
features
Extra flat light
CONCRETE POOL
Built of stable, heat-resistant plastic materials. White. Niche not required for installation. ABS or S.S. face-
plate fixed to the wall by means of a reinforced plastic cross, plugs and screws. Supplied with 2.5 m cable of
2 x 1.5 mm2 100 W - 12 V halogen lamp. Supplied without transformer.
White ABS faceplate 21626 6 8.70 0.055

Faceplate in US customary units 06643 4 - -
S.S. faceplate 35666 6 8.70 0.055
CONCRETE POOL WITH LINER

There is no need of niche for the installation. Available with ABS or stainless steel base cover. Faceplate fixed
to the wall by means of a reinforced plastic cross, plugs and screws.
Rev. 00
DIMENSIONES Ao / Year: 2008
DIMENSIONS Pg./Page
ESP / ENG
1/1

CDIGO / CODE: 43452
DESCRIPCIN: PROY. EXTRA PLA PISC. LINER CON HORMIGN
ABS faceplate 43452 1 1.5 0.006
DESCRIPTION: EXTRA FLAT LIGHT FOR POOL LINER WITH CONCRETE
A
S.S. faceplate 43454 1 1.5 0.006
PREFABRICATED POOL
Does not require niche. Made of heat-resistant plastic. Cross shaped reinforced plastic fixing using plugs,
screws and gaskets.
280
Wall fixing with gaskets, bolts and nuts. 21627 6 13.7 0.055
Wall fixing with gaskets, bolts and nuts
S.S. faceplate. 35667 6 13.7 0.055
New fixing system that allows installation of
M-25 A liner and
SECCIN A-Alights after the pool is totally finished 24765 5 8.8 0.055
New fixing system that allows installation of
31
liner and lights after the pool is totally finished

S.S. faceplate. 35668 5 8.8 0.055
73
80 255
,50
10
40 4x
Pool lighting &
ornamental features
Halogen LIGHTS
PS lights
Supplied with niche to be embedded in the pool wall. Manufactured in PS plastic. PAR56 300 W-12 V halogen
lamp. The niche has a single cable outlet on one side. The stuffing boxes are made of brass with M-25 threads.
The PS model lights are supplied without transformer.
Without cable
With S.S. faceplate 07831 4 12.25 0.090
NICHES
To be embedded in the pool wall. Manufactured in PS. The niche has a single cable outlet on one side. Niche
for PS light models (07831, 07833, 07845 and 07846). These niches are supplied without cable.
Concrete pool niche 00355 6 7 0.068
Plastic MINI light

CONCRETE POOL
Manufactured in PA and ABS plastic materials. Without screws, bayonet system on both the faceplate and the
housing. Easy to remove using the faceplate front as a key to replace the lamp. 50 W-12 V aluminised halogen
lamp and 38 opening of 95 lux light beam at 4 m distance with an illuminated circle of 2.5 m. Light easy to
install in a wall conduit with a solvent weld connection (code 15661). Possibility of attaching colour lenses to
the faceplate. Light supplied without transformer. Available in white ABS faceplate or S.S.
Metal body and faceplate in ABS 33684 4 4.70 0.022
PREFABRICATED POOL
Available in plastic ABS faceplate or S.S.

S.S. base faceplate 36647 4 2.80 0.010
S.S. faceplate 36642 4 5.60 0.010
Wall conduit
Rosca 2" BSP
256
Pool lighting &
ornamental features
Halogen LIGHTS
MINI light
Manufactured in PA and ABS plastic materials. Niche supplied separately. With 2.5 m cable of 2 x 1.5 mm2.
Without screws, bayonet system on both the trim and the housing. Easy to dismantle using the faceplate as a
tool to replace the lamp. Aluminised 50 W-12 V halogen lamp and 38 opening of 95 lux light beam at 4 m
distance with an illuminated circle of 2.5 m. Possibility of attaching colour lenses to the faceplate. Light sup-
plied without transformer. Available in white ABS faceplate or S.S. The niche must be purchased separately.
ABS light with ABS faceplate 49820 4 6.49 0.022
ABS light with S.S. faceplate 49821 4 6.49 0.022
S.S. light with ABS faceplate 49822 4 6.49 0.022
S.S. light with S.S. faceplate 49823 4 6.49 0.022
NICHES
Niche for MINI light concrete pool 06967 4 4.20 0.117
Niche for MINI light prefabricated pool 00369 4 4.20 0.117
Niche for MINI light Panel Protect 49828 4 4.20 0.117
& ornamental
Pool lighting
features
New
Snap-on niche for the LumiPlus Mini projector
Snap-on niche for MINI projectors in concrete pools, suitable for both LED and halogen bulbs. Particularly
suited for lighting up built-in pool steps. The bulbs are easy to change as a considerable length of cable can
be left at the back of the niche. They can be adjusted to the thickness of the gunite. There is a section of
tubing on the front of the projectors that can be cut after a pool has been concreted over and the cable can
be wound around a spool on the back of the casing. The niche's stuffing box assembly can be reached from
the tubing on the front of the casing. Code Standard Standard Standard
Niche for concrete pools 53956 6 4.34 0.054

Underwater light with calbe conduit

100W, 12V small underwater light. The underwater light niche is not needed for this installation. The light is
anchored to the swimming pool wall without niche, only with an inlet threaded directly into the wall conduit.
This inlet works as a niche.
43933 6 8.4 0.0522
Kit double gaskets

Kits consisted of a double gasket and the screws needed for the installation of underwater lights in panel
pools. The Kit allows the installation of several swimming pool accessories, protecting the panel from any water
contact. Easy installation. It avoids corrosion in the cut area of the panel, where the accessories are installed.
It allow to install the models with inserts or selftappers underwater lights.
For projector with inserts 14517-0500 80 - 0.035
For projector STD, self-tappers 14517-0600 80 - 0.035
257
Pool lighting &
ornamental features
Halogen lights for fountains and ponds
Underwater lights
Manufactured in stable plastic materials. Rotational bracket allowing light beam to be directed in any direction.
Lamp PAR 56 or PAR 38. It can be fixed to the floor with plugs and screws. Possibility of adapting colour
lenses.
Without cable
With PAR 56, 300 W-12 V lamp 08930 4 8.2 0.080
With PAR 38, 120 W-24 V lamp 08931 4 8.0 0.080
With 2.5 m cable of 2 x 6 mm2
With PAR 56, 300 W-12 V lamp 22397 4 9.0 0.086
With PAR 38, 120 W-24 V lamp 23046 4 9.0 0.086
Base for Mini lights for fountains

Base made of stainless steel in order to mount any Mini light without niche. Ideal for placing lights in fountains
or water installations. The light must always be submerged.
35716 1 0.3 0.003
Lamps for halogen lights
PAR 56 halogen lamp 300 W 12 V

For lights with niche.
00370 1 0.7 0.003
Halogen lamp 100 W 12 V

For flat and extra-flat lights.
00371 1 0.2 0.001
Dichroic bulb 50 W 12 V

00372 1 0.055 0.001
PAR lamp 38 E-27 120 W 24 V

For fountain and pond lights.
09309 1 0.5 0.002
258
Pool lighting &
ornamental features
Connection boxes
Transformers
Made according to EN 60742 Standard.
100 VA from 220 V to 12 V
for lights 21626, 21627 and 24765 00383-4146 6 15.0 0.011
up to 35 m cable length 00384-4146 4 21.0 0.012
up to 25 m cable length 00385-4146 2 19.0 0.012
Please enquire for alternative range of transformers.
Sealed security transformer IP-65 for pools

Manufactured according to the UNE-EN 61558 standard and EU rules.
- IP-657 housing protection degree.
- Transformer Class II. Total Protection against electric shock.
- Self-extinguishing housing IEC 695-2-1
- Frequency 50/60 Hz
130 VA from 220-240V to 12 V 35807 1 3.2 0.02
400 VA from 220-240V to 12-17 V 35385 1 6.8 0.04
800 VA from 280-240V to 12-17 V 35386 1 10.4 0.04
Transformer protection boxes
& ornamental
Pool lighting
features
Made of zinc plated steel plate, painted finish.
For transformer 00383 00386 1 1.15 0.01

For transformer 00384 00387 1 1.57 0.01
For transformer 00385 00388 1 3.00 0.01
Connection box with security cover

Manufactured in ABS, made up of three 3/4" inlets/outlets M-25 and 3/4" thread connections.
Versin standard 30825 12 4.65 0.030

Versin con NPT 07680 12 - -
Connection box
In Stainless Steel AISI-316. Two side outlets, thread PG16 with PG-16-M25 converter. 3/4" BSP threaded
bottom connection.
00393 1 0.21 0.002
Flexible conduit hose

For connection from light to connection box, length 1 m hose.
Threaded ends 3/4 & M25 28138 - - -

M-25 socket joint 10892-0404 - - -
Threaded ends 3/4" and M26 150 cm 28138-150 - - -
259
Pool lighting &
ornamental features
Connection boxes
100 m cable roll HO7RN-F 2 x 6 mm2

The roll contains 100 m of cable HO7RN-F, with 2x6 mm2 section. Ideal for all lights with PAR 56, 300 W-
12V lamps. Meets all the Standards of illumination and voltage for all types of pools. It is recommended for
Standard, PS, Panel Protect, and UL-EUR series and fountain lights.
100m cable roll 15264 1 187.5 -
"Aquarmony" underwater musical system
Aquarmony Loudspeaker
With frontal installation. To listen to music and voice underwater creating a magical and different atmosphere.
Aquarmony is a sealed waterproof loudspeaker designed for your pool. It is made of high quality components,
innovative technology and with an assembly system assuring a correct operation in salt water or with a high
Chlorine content. Easy installation.
Aquarmony Loudspeaker 25680 - - -
Niche for concrete pool 00349 - - -

Niche for liner pool 00361 - - -
Note: The niches come with a stuffing box assembly and a 1.5-m cable grommet specially designed for the
Aquarmony range
Technical characteristics
Maximum power 60 W
Impedance 4 ohm
Frequency 200-12,000 Hz
Maximum area per loudspeaker 80 m2
Maximum installation depth 40 cm
Weight 5 Kg
Cable lenght supplied 5m
Amplifier and loudspeakers - RK 600 System

Amplifier system for one or two Aquarmony loudspeakers. Assembled and fitted into a Rack 12U rack. The
rack has space available for installing an additional amplifier. It is made up of:
- CD reader
- 4 in line inlet mixer + 2 microphone inlets for separate line controls.
- 120 W power amplifier with isolation transformer
- One complete Rack 12U rack.
LIT001988 1 - -
260
Pool LINING MATERIAL
POOl LINING
MATERIAL
264 PVC reinforced 150/100 liner

268 Liner accessories
270 Liner classification according to pool
271 Liners for steps
272 Conditions for accepting and order
273 Vitreous lining
pool lining
material
261
262
pool lining
material
263
PVC reinforced 150/100 liner
AlkorPlan2000
AlkorPlan2000 Antislip
Description Colour
1.65 x 25 m 1.65 x 20 m
Light Blue 49908 49923
Adriatic Blue 49909 49924
AlkorPlan2000 reinforced
Caribbean Green 49910 49925
membrane, a single colour,
with a special lacquer White 49911 49926
formulation to protect Sand 49912 49927
against external factors
Light Grey 49913 49928
Dark Grey 49914 49929
AlkorPlan3000
Alkorplan3000 Antislip
Description Colour
1.65 x 25 m 1.65 x 20 m
Blue Byzanze 49916 52610
Mosaic 49918 -
AlkorPlan3000 reinforced Carrara 49919 52611

membrane, with print Marble 49920 -
design and a special lacquer
formulation to protect Blue Persia 49921 52609
against external factors Sand Persia 49907 -
New Black Persia 60612 -
Platinum 49922 -
AlkorPlan Liquid PVC
Alkorplan3000
Description Colour
1.65 x 25 m
Light Grey 52618
Dark Grey 52619
Caribbean Green 52620
White 52622
AlkorPlan Liquid PVC
for sealing joints Transparent 52623
(1 litre cans / 6 unit packs) Light Blue 52624
Adriatic Blue 52625
Sand 52626
Platinum 52627
Commercial pool
Description Colour Code
Lane strips (25 x 0.25 m) Black 50798
264
Colours
Light Blue Adriatic Blue Caribbean Green White
Sand Light Grey Dark Grey
pool lining
material
Blue Byzanze Mosaic Carrara Marble
New
Blue Persia Sand Persia Platinum Black Persia
265
266
New
AlkorPlan3000 TOUCH Membrane
Inspired by nature, the designs bring beauty, elegance and character to each pool with a surprising touch, invit-
ing you to caress the surface. This revolution in reinforced membranes for the lining of pools is now available
in 3D. Let yourself be seduced by TOUCH and enhance the beauty of your pool
TOUCH Antislip
Description Colour
1.65 x 25 m 1.65 x 20 m
Elegance 58532 58535
AlkorPlan3000 TOUCH 3D
reinforced membrane, Relax 58533 -
inspired by nature
Authentic 58534 -
New
Special joint sealant
This sealant is specifically for the installation of RENOLIT AlkorPlan 3000 TOUCH membranes. It is made with
an innovative formula that makes it more resistant to the passage of time and colour fading, prolonging the life
of the pool, as well as maintaining its perfect appearance
TOUCH
Description Colour
1.65 x 25 m
Elegance 60613
AlkorPlan PVC Liquid
Relax 60614
for sealing joints
Authentic 60615
New
Strip for installation without overlap
Strip to install the AlkorPlus TOUCH membrane without overlapping, recommended for the swimming pool floor
for a flawless visual finish. Its use is recommended with geotextile felt of 300g or 400g on the bottom of the
pool to prevent visible lumps appearing at the joints and welds.
pool lining
material
Strip for installation without overlap Grey 60616
New
Geotextile fungicide
Thermofused polypropylene felt, treated with natural anti-bacterial metal ion additives, for continuous anti-
bacterial action. It is used as a protective layer between the AlkorPlan membrane and the surface of the swim-
ming pool, preventing the proliferation of bacteria, fungi and microorganisms, and disguising any irregularities
to the surface of the pool before applying the membrane. It also provides a more pleasant feeling for the swim-
mer when walking in the pool.

Blue geotextile of 400 g/m2 Blue 60617
Colours
New New New
Elegance Relax Authentic
267
Liner accessories
New
Skimmer Adaptor: Skimmer Solution
The skimmer adaptor replaces the need to remove the previous skimmer, as it is inserted into the previous
skimmer and sealed using ABS glue or marine silicone. It is only suitable for skimmers with an internal opening
of 140 mm x 201 mm
Packing Weight kg. Volume m3
55977 1 1.3 -
Fastening accessories for liners 75/100 for pools under construction

Horizontal Hung PVC 1.5 m x 50 mm
(free form) 40844 - - -
Horizontal hung PVC 2 m x 50 mm 05815 - - -
Horizontal hung PVC 2 m x 38 mm 09492 - - -
Angle PVC radius of 15 cm x 50 mm 05819 - - -
Angle PVC radius of 15 cm x 38 mm 09493 - - -
In Aluminium
Horizontal hung ALU 2 m x 50 mm 05816 - - -
ALU angle 50 mm (radius of 15 cm) 05818 - - -
Fastening rivets (Box of 250 units) 05820 - - -

Flexible fastening strip. Lineal metre 05825 - - -
Fastening accessories for liners 75/100 for pool renovation

Vertical hung PVC 2 m 05817 - - -
Angle for vertical fastening (radius 15 cm) 16194 - - -
In Aluminium
Vertical hung ALU 2 m 16175 - - -
Fastening rivets (Box of 250 units) 05820 - - -

Flexible fastening strip. Lineal metre 05825 - - -
Accessories for liners 150/100

Galvanized plate band (2 x 0.05 m) 32324 - - -
Applicator bottle (unit) 05780 - - -
Band (8 mm) 05781 - - -
Solvent THF (1 litre) 05778 - - -
Solvent THF (5 litres) 05779 - - -
Neoprene glue for PVC (5 Kg) 05784 - - -
Note: In the event of assembling a liner 150/100 by hung type fastening with an 8 mm strip, the accessories
are the same as for liners 75/100 (see next page).
268
Liner accessories
Adhesives for all types of liners

Adhesive for antibacterial protection (Tin 5 Kg) 25748 - - -
Komerling adhesive 1220 (Tube 125 ml) 06655 - - -
25748 Komerling adhesive 1220 (Tin 750 ml) 06656 - - -
Liner protection for 75/100 and 150/100

Protection 300 gr/m AB blue
2
(roll 100 m2) 16176 - - -
Rivets
Aluminum rivets.
Short 15.5 - 4.5 mm 12264 4 8.85 0.01
Long 25.5 - 4.5 mm 12265 3 8.0 0.01
pool lining
material
Double PVC hem
Welded to the edge of the liner, allows the liner to attach to the pool shell, by using the corresponding profile.
12184 250 m 9.0 0.036
New
Alkorplus Anti-Stain/Alkorclean Stain Remover
Alkorclean Stain Remover removes stains caused by metals. Alkorplus Anti-Stain is a liquid to prevent stains
by preventing dirt forming on the floatation lines.
Alkorclean Stain Remover 55976 - - -

Alkorplus Anti-Stain 53898 - - -

269
Consult us for pools of Liner classification according to pool

different designs and shapes
Standard pool liners 75/100
Solid colour models Code RECTANGULAR ROUND OVAL OVOID SHAPED
Light blue 09278

France blue 09277
Caribbean
green 09281
White 09279
Sand 16131
Printed colour models Code

Servanne 26668
Mosaic 09280
Blue Marble 16132
Green 16132V
Marble
Sand Marble 16132A
Byzantium 26669
blue
Byzantium 26670
green
Non-standard pool liners 75/100
Solid colour models Code KIDNEY LAZY POLYGONAL PARALLELOGRAM TRAPEZIUM
Light blue 05810

France blue 05809
Caribbean
green 05813
White 05811
Arena 16137
Printed colour models Code

Servanne 26686
Mosaic 05812
Blue Marble 16138

Green
16138V
Marble
Sand Marble 16138A
Byzantium 26678
blue
Byzantium 26679
green
270
For steps that do not fit the Standard

Liners for steps models shown here, request quote.
Below we provide you with the details of the shapes and models you can choose from plain or printed liners to ensure you select the correct liner
for your pool steps. Steps that are fitted along the breadth of the basin are invoiced in accordance with the standard model RECTA, as long as
the width does not exceed 4 meters. Attention: the size of the basin should not include the depth of the steps.
Standard steps Non Standard steps

Even steps
Even depth of steps
Right angles
Uneven step depth Riser height is uneven
Even riser height (only the base riser may

be different in height)
Round angle
Sloping steps
Steps Plain Liner Plain Liner + Bands

Diagram
Shape Widths Code Code
0 to 2 meters 05789 05789B

Straight
3 to 4 meters 05791 05791B
0 to 2 meters 16163 16163B

Roman 2 to 3 meters 25868 25868B
3 to 4 meters 05800 05800B
0 to 2 meters 05803 05803B

Right angle
2 to 3 meters 05804 05804B
0 to 2 meters 16167 16167B
pool lining
material
1/4 Circle
2 to 3 meters 089443 089443B
Steps Printed Liner Printed Liner + Bands

Diagram
Shape Widths Code Code
0 to 2 meters 05794 05794B
Straight 2 to 3 meters 05795 05795B
3 to 4 meters 05796 05796B
0 to 2 meters 16169 16169B
Roman 2 to 3 meters 05801 05801B
3 to 4 meters 05802 05802B
0 to 2 meters 05806 05806B

Right angle
2 to 3 meters 05807 05807B
0 to 2 meters 16173 16173B

1/4 Circle
2 to 3 meters 089446 089446B
271
Conditions for accepting and order
Order:
All orders or enquiries for modifying orders must be made in writing. For avoiding any delay, the client, at his own risk, must forward the
supplier all the necessary liner measurements for executing the work. In case the information supplied by the client is insufficient, he will
have to supply the missing information ahead of the manufacturing time.
Implicit data:
In cases certain informattion is not supplied in time, we shall consider the below mentioned data for the liner manufacture:
* Vertical radii:15 cm
* Horizontal radii: max. 5 cm (only in pool basin). Holdingsystem, Hung system.
* Horizontal measurements taken on the basin floor.
* The depth measurement taken from under the coping stone till the wall touching the floor.
* The diagonals will be measured from the corner angles and not along the curves.
To avoid certain misunderstandings, we suggest you taking the following precautions:
For holding the liner: * Specify the type (Hung, Overlap or in V); We leave 15 cm of extra liner length in height for the
Overlap holding system.
For steps: * Check whether the angles between the step tread and rise (flat and vertical step surfaces) are
really found in a straight line.
* Installation of a discharge nozzle in the middle of the first step is highly recommended for hol-
ding the liner in place.
* At least 30 cm of water should be left in the pool for maintaining the first step.
* Avoid designing staircases having more than 5 steps.
* For confirming dimensions, give the lengths of each step.
* Check the verticality of pool walls. In case of deficient plumbness, enquire about the order via-
bility.
* Compound inclination safety ledges should be avoided on the liner.
Taking measurements:
* Give the total length and width.

* Pool depths.
* Safety ledge width on each side.
* Specify the peripheral size on each side.
* Measurements of each corner, edge and inclination.
* All dimensions should be indicated with horizontal and/or vertical measurements.
If angles are not straight:
* Measure all the diagonals from one point.

* Diagonals (hypotenuse) of right angles are not necessary, only the irregular angles
other than the 90.
Definition of arcs of circles:
* Arcs of circles are defined by their radii.

* If a radius cannot be defined, a radius gauge should be supplied or a triangulation to define it.
* Ellipses are defined by gauges (or grid drawing with approximate 1 meter intervals)
Sectional views:
* Three view plans should be submitted: top view, front view and lateral view.
Full size pattern:
* Define the pattern, one side sky and the other side water (or a plan).
* The patterns are for the pool basin dimensions or for the covers.
Shuttering:
* Specify shuttering dimensions according to the drawings.

* Check that inside shuttering angles are in a straight line.
* Check that vertical pool basin angles shuttering are in a straight line.
* Check that the horizontal angle of the wall and shuttering are in a straight line.
272
Vitreous lining
Model: SMOOTH
MIX DEGRADED MODELS Pressed and later cooked Vitreous mosaic.

Developed and designed to resist chemical products, frost, stain and other hard weather conditions.
A7
Due to its unalterability, easy clean and installation it is an optimum alternative to recover pools,
wellness or outdoor-indoor decoration.
TECHNICAL CHARACTERISTICS
A6
UNE-EN ISO 10545-3:1997 Water absortion < 0.1%
UNE 67101: 1985 + 1M 1992 Scratch resistence (Mohs) 4
UNE-EN ISO 10545-12:1997 Frost resistance Resists
A5 UNE-EN ISO 10545-14:1998 Stain resistance Class 5 (Hot water)
UNE-EN ISO 10545-13:1998 Chemical resistance Class UA/UHA resistance
A4
OPTIONS
NOMINAL FORMAT THICKNESS PLOT POLYURETHANE
25 x 25 mm 4.2 - 4.7 mm - Available
A3
50 x 50 mm 5.2 - 5.7 mm Available -
A2 FINISHED PLOT POLYURETHANE

PLOT AND POLYURETHANE:
AZUL FUERTE
Both sticked to the rear side of the mosaic plate.
AZUL CLARO
It will remain directly to the support.
A1
AZUL PISCINA
BLANCO
PACKAGING
WATER GRADIENT 7 PIECES
DEGRADADO AGUA 7 PIEZAS
FORMAT m2/Box m2/Pallet Box/Pallet Kg/Box Kg/Pallet
DARK BLUE 25 x 25 mm Standard 2 144 72 18 1316
50 x 50 mm Standard 2 108 54 22 1208
BRIGHT BLUE
POOL BLUE
pool lining
material
COMBINATIONS 25 x 25 mm
WHITE
CUSTOM MADE DEGRADED

Indicate dimensions to recover and the selection
of colours to combine for obtaining BALEARES AGUAMARINA MALDIVAS
your customised area. WHITE - POOL BLUE WHITE - STD. BLUE - DARK BLUE WHITE - STD. BLUE
Check with your distributor.
Possibility of combine other foggy colours. Check with your distributor.
CODES New New
GREEN- COBALT
FORMAT GREEN-253 GREEN-254 GREEN-271 STD. BLUE POOL BLUE DARK BLUE YELLOW ORANGE RED
252 BLUE
25 x 25 mm POLYURETHANE 54339 54340 54341 54350 54364 54365 54363 54362 54358 54397 54410
50 x 50 mm PLOT 44997 44998 44999 45003 45014 45015 45013 45012 45010 45018 45027
CODES New New New New New New New
BROWN- BROWN- BROWN- VIOLET- VIOLET-

FORMAT CREAM PINK PINK-272 WHITE GREY-258 BLACK
256 273 277 269 270
50 x 50 mm PLOT 45017 51561 45005 45009 45028 45004 60029 45002 45016 45001 45019
We reserve the right to change all or part of the features of the articles or contents of this document, without prior notice.
273
VITREOUS LINING
Model: FOG
MIX DEGRADED MODELS Pressed and later cooked Vitreous mosaic.

N7 Due to its unalterability, easy clean and installation it is an optimum alternative to recover pools,
N6 TECHNICAL CHARACTERISTICS
N5
UNE-EN ISO 10545-14:1998 Stain resistance Class 5 (Hot water)
N4
OPTIONS
NOMINAL FORMAT THICKNESS PLOT POLYURETHANE
25 x 25 mm 4.2 - 4.7 mm - Available
N3
50 x 50 mm 5.2 - 5.7 mm Available -
N2 FINISHED PLOT POLYURETHANE

PLOT AND POLYURETHANE:
NEGRO Both sticked to the rear side of the mosaic
NIEBLA NEGRO plate. It will remain directly to the support.
N1
258
BLANCO
7-PIECE GRADUATED NIGHT TONES

PACKAGING
DEGRADADO NOCHE 7 PIEZAS FORMAT m2/Box m2/Pallet Box/Pallet Kg/Box Kg/Pallet
BLACK 25 x 25 mm Standard 2 144 72 18 1316
BLACK FOG 50 x 50 mm Standard 2 108 54 22 1208
GREY-258
WHITE COMBINATIONS 25 x 25 mm
CUSTOM MADE DEGRADED

Indicate dimensions to recover and the selection
of colours to combine for obtaining TURQUESA CARIBE
your customised area.
BLUE FOG - DARK FOG BLUE FOG - POOL FOG
Possibility of combine other foggy colours. Check with your distributor.
CODES New New New
FORMAT GREEN-202 GREEN-203 GREEN-204 GREEN-211 BLUE FOG POOL FOG DARK FOG YELLOW-207 ORANGE FOG RED FOG
25 x 25 mm POLYURETHANE 54312 54313 54314 54321 54399 54403 54400 54317 54401 54404
50 x 50 mm PLOT 44983 44984 44985 44990 45020 45024 45021 44988 45022 45025
CODES New New New New New New New New New
BROWN- BROWN- BROWN- BROWN- VIOLET- VIOLET-

FORMAT PINK FOG PINK-212 WHITE FOG GREY-218 BLACK FOG
206 214 213 217 210 239
50 x 50 mm PLOT 44987 44993 44992 44996 45026 44991 44989 60030 60031 51552 45023
274
Vitreous lining
Model: SMOOTH ANTISLIP
Pressed and later cooked Vitreous mosaic.

Designed for your safety, we introduce this anti slip mosaic.
wellness or outdoor-indoor decoration or walk ways. High adherence in wet areas.
TECHNICAL CHARACTERISTICS (CLASE 3)

UNE-ENV 10545-12:1997 Slip resistance Class 3
UNE-EN ISO ISO/DIS 10545-13-17 DFC (Dynamic Friction Coefficient) Excellent
DIN 51130: 2010 Critical angle of displacement (ramp) R13
DIN 51097 Critical slip angle (barefoot) Class C
OPTIONS
NOMINAL FORMAT THICKNESS POLYURETHANE
25 x 25 mm 4.2 - 4.7 mm Available
FINISHED POLYURETHANE
POLYURETHANE:
pool lining
material
PACKAGING
25 x 25 mm Standard 2 144 72 18 1316
CODES (CLASS 3) New New
COBALT
FORMAT GREEN-252 GREEN-253 GREEN-254 GREEN-271 STD. BLUE POOL BLUE DARK BLUE YELLOW ORANGE RED
BLUE
CODES (CLASS 3) New New New New New New New New
BROWN- BROWN- BROWN- VIOLET- VIOLET-

FORMAT CREAM PINK PINK-272 WHITE GREY-258 BLACK
256 273 277 269 270
275
Vitreous lining
Model: FOG ANTISLIP

Designed for your safety, we introduce this anti slip mosaic.
wellness or outdoor-indoor decoration or walk ways. High adherence in wet areas.
TECHNICAL CHARACTERISTICS (CLASS 3)

UNE-ENV 12633:2003 Anexo A Slip resistance Class 3
UNE-EN ISO ISO/DIS 10545-17 DFC (Dynamic Friction Coefficient) Excellent
DIN 51130: 2010 Critical angle of displacement (ramp) R13
DIN 51097 Critical slip angle (barefoot) Class C
OPTIONS
POLYURETHANE:
PACKAGING
25 x 25 mm Standard 2 144 72 18 1316
CODES (CLASS 3) New New New
YELLOW-
FORMAT GREEN-202 GREEN-203 GREEN-204 GREEN-211 BLUE FOG POOL FOG DARK FOG ORANGE FOG RED FOG
207
CODES (CLASS 3) New New New New New New New New
BROWN- BROWN- BROWN- BROWN- VIOLET- VIOLET-

FORMAT PINK FOG PINK-212 GREY-218 BLACK FOG
206 214 213 217 210 239
276
Vitreous lining
Model: GLOSSY

Iridiscent effect. Bright and colour variations according to the light exposure.
OPTIONS
POLYURETHANE: Sticked to the rear side of the mosaic plate.

PACKAGING
pool lining
material
25 x 25 mm Standard 2 144 144 18 1316
CODES
FORMAT G-304 G-305 G-306 G-308 G-311
25 x 25 mm PolYuretHanE 54159 54160 54161 54163 54166

CODES
New New New
FORMAT G-312 G-319 G-320 G-321
25 x 25 mm PolYuretHanE 54167 57370 57371 57372
277
Vitreous lining
Model: METAL-AIR

Iridiscent effect. Metalic finished.
MT-01 UNE 67101: 1985 + 1M 1992 Scratch resistence (Mohs) 4
OPTIONS
MT-02 FINISHED POLYURETHANE

PACKAGING
MT-03 25 x 25 mm Standard 1 144 144 9 1316
CODES
FORMAT MT-01 MT-02 MT-03
25 x 25 mm PolYuretHanE 54394 54395 54396
278
Vitreous lining
Model: MOON LUMINISCENT

Iridiscent effect. After being charged while lights are on, will emit smooth light.
OPTIONS

pool lining
material
PACKAGING
25 x 25 mm Standard 1 144 144 9 1316
CODES
FORMAT LU-02
25 x 25 mm POLYURETHANE 54390
279
Vitreous lining
Model: MATTE
Pressed and later cooked Vitreous mosaic. Matte finish.

Class UA/UHA resistance.
UNE-EN ISO 10545-13:1998 Chemical resistance
Does no resist HCL Class UHC.
OPTIONS

PACKAGING
25 x 25 mm Standard 2 144 144 18 1316
CODES
FORMAT MA-01 MA-02 MA-03 MA-09 MA-10
25 x 25 mm POLYURETHANE 54174 54175 54176 54182 54183
280
Vitreous lining
Model: COLOUR
Cut and coloured glass.

OPTIONS
NOMINAL FORMAT THICKNESS FIBER
25 x 25 mm 5 mm Available
FINISHED FIBER
FIBER: Sticked to the rear side of the mosaic plate.

PACKAGING
pool lining
material
25 x 25 mm Standard 1 99 99 11.5 1138.5
CODES
New New
FORMAT PCMIX-2011 PCMIX-2013
25 x 25 mm FIBER 45054 40823
281
Vitreous lining
Model: FLASH - Digital decoration
Cut and coloured Glass, with digital decoration.

Any kind of digital graphic design can be done, keeping all the vitreous mosaic characteristics.
High resolution pictures are requested, with a minimum of 2 MB per m2.
Any custom made pictures available based on customers requirements.
Due to its unalterability, easy clean and installation it is an optimum alternative to recover pools, wellness or outdoor-indoor decoration.
FLASH TECHNICAL CHARACTERISTICS

IMPRESSES CUSTOMISED UNE-EN ISO 10545-3:1997 Water absortion < 0.1%
We customise your vitreous mosaic UNE 67101: 1985 + 1M 1992 Scratch resistence (Mohs) 5
with the photograph that you wish. UNE-EN ISO 10545-12:1997 Frost resistance Resists
Minimum requirement 2 MB per m2.
CODE OPTIONS
NOMINAL FORMAT THICKNESS
51749 25 x 25 mm 4.2 - 4.7 mm
FINISHED
TRANSPARENT FILM
PACKAGING
25 x 25 mm Standard 2 144 72 18 131
282
Vitreous lining
Model: PATTERNED BORDERS
Pressed and later cooked vitreous mosaic.

NOTE TECHNICAL CHARACTERISTICS

Patterned borders can be customised with the UNE 67101: 1985 + 1M 1992 Scratch resistence (Mohs) 5
colours that you wish.
OPTIONS FINISHED PAPER

NOMINAL FORMAT THICKNESS Once applied to wall,
paper must be removed.
25 x 25 mm 4.2 - 4.7 mm
PACKAGING
25 x 25 mm Standard 2 144 72 18 1316
25 x 25 mm Standard-45853 6 432 72 14 1008
CODES
25 x 25 mm LENGTH X HEIGHT
pool lining
material
DARK BROWN
22164 300 x 180 mm
CREAM
POOL BLUE
16040 325 x 26 mm
DARK BLUE
283
Vitreous lining
Model: STANDARD MOSAIC DESIGNS
Pressed and later cooked vitreous mosaic.

NOTE TECHNICAL CHARACTERISTICS

The designs can be customised to your desired UNE 67101: 1985 + 1M 1992 Scratch resistence (Mohs) 5
combination of colours.
Consult your distributor.
OPTIONS FINISHED PAPER

NOMINAL FORMAT THICKNESS Once applied to wall,
paper must be removed.
25 x 25 mm 4.2 - 4.7 mm
PACKAGING
25 x 25 mm Standard Check with your distributor
16043 - DOLPHIN 3330 x 1330 mm
45160 - COMPASS ROSE 2670 x 2670 mm
45152 - PLAYING DOLPHINS 3330 x 1330 mm 45159 - SEAL 2000 x 2670 mm
284
pool covers and rollers
pool covers
and rollers
286 Thermal covers for summer

287 Premium thermal covers
288 Thermal covers - foam
289 Protection covers for winter
292 Accessories for covers
295 Storage rollers for covers
298 Automatic covers
AND ROLLERS
POOL COVERS
285
Thermal covers for summer
Bubble model 400 m - blue

Packaging Weight kg. Volume m3
Pool Type
Without eyelets Standard 09296 - - -
Freeform 06214 - - -
DeLuxe Model Standard 09295 - - -
Bubble model 400 m - blue/black

bubble
Code Standard Standard Standardd
Pool Type
Steps and accessories bubble models

Straight stairs fixed price 06215 - - -
Roman stairs fixed price 06217 - - -
Other stairs fixed price 06218 - - -
Blue/black bubble Special cut pieces for stairs 03976 - - -
Additionial nickel-plated brass eyelet 04001 - - -
The accessories list is

found in page 388.
TECHNICAL FEATURES
Floating Isothermal Bubble Covers
Composition Polyethylene based

Joints Ultrasonic welding
Borders Stitched Polyethylene strips
NB Model Only cut, without eyelets
Eco Model Eyelets, lengthwise on both the sides
DeLuxe Model Perimetral eyelets
Fixing Eyelets on both ends of one long side.
Eyelets at approx. every 65 cm on the

opposite side
Composition Nickel plated brass eyelets
Standard Supplied in cardboard box in a protection
Packaging bag and with instructions leaflet
286
Premium thermal covers
Ultra-Thermal model 500 m - Blue/Gold

Pool type
DeLuxe model Standard 40837 - - -
Free form 40839 - - -
High resistance model 500 m Reinforced Blue

Pool type
Without eyelets Standard 40840 - - -
Free form 40842 - - -
DeLuxe model Standard 40841 - - -
Free form 40843 - - -
Steps and accessories for premium models

Straight stairs fixed price 41149 - - -
Roman stairs fixed price 41150 - - -
Other stairs fixed price 41151 - - -
AND ROLLERS
POOL COVERS
Special cut pieces for stairs 41152 - - -
287
Thermal covers - foam
5 mm Foam cover

Pool Type
Eco Model Standard 09297 - - -
Non-Standard 03983 - - -
foam
Steps and foam models

Straight stairs fixed price 06215M - - -
Roman stairs fixed price 06217M - - -
Other stairs fixed price 06218M - - -
Special cut pieces for stairs 03993 - - -
Additional nickel-plated brass eyelet 04001 - - -
Attention: Unless specified in the order, the stair cover is supplied welded to the pool cover, applying the cor-
responding surcharge.
The cover classification into Standard, non-standard and freeform covers are based on the different shapes
indicated in the catalogue.
The accessories list is found in page 388.

- The eco models are provided with eyelets along side both short sides.
- The Deluxe models are provided with perimetral eyelets.
TECHNICAL FEATURES
Foam Covers
Composition Reticulate type Polyethylene based foam

Joints Thermal welding using double sided
Polyethylene ribbons
Borders Stitched PVC strips
Eco Model Eyelets, lengthwise on short the sides
DeLuxe Model Perimetral eyelets
Fixing Eyelets on both ends of one short side.
Eyelets at approx. every 65 cm on the
opposite side
Composition Nickel plated brass eyelets
Option Lengthwise floating Polyethylene foam
reinforcement
Standard Supplied rolled duly
Packaging protected with a cover SLEEVE.
288
Protection covers for winter
Gauze type - Blue model

Pool Type
Free form 03868 - - -
Free form 03877 - - -
Gauze type - Green model
blue Code Standard Standard Standard

Pool Type
Steps and accessories gauze models

Straight stairs-fixed price 05755 - - -
Roman stairs-fixed price 05756 - - -
Other stairs-fixed price 06219 - - -
Green Special cut pieces for stairs 03869 - - -
Classification: The cover classification into Standard, non-standard and freeform shaped covers are based on
the different shapes indicated in the catalogue.
TECHNICAL FEATURES
Gauze Models
Composition Wetted Poliethilene fabric 230 g/m2
AND ROLLERS
Joints English seam POOL COVERS
Borders Stitched PVC strips (Eco Model)

Perimetral eyelets and triangular reinforce
ment on the corners (for Deluxe Model)
Eco fixing With eyelets
blue deluxe model + Double pressed rubber tensor
+ S.S. anchoring fixture
Distance between rubber tensors = 70 cm
Distance between eyelets = approx. 20 cm
DeLuxe fixing With straps
+ dynamometric spring
Distance between straps = approx.1 m.
Overlapping = 50 cm
Standard Supplied in cardboard box in a protected
Packaging bag and with instructions leaflet
green deluxe model

289
PVC Intersup opaque model - blue/ivory

Pool Type
Free form 06198 - - -
Free form 06208 - - -
PVC Intersup opaque model - green/ivory
blue eco INTERSUP Code Standard Standard Standardd

Pool Type
Free form 09528 - - -
Free form 09531 - - -
Steps and others for Intersup models

Straight stairs-fixed price 05755 - - -
Roman stairs-fixed price 05756 - - -
Other stairs-fixed price 06219 - - -
Blue luxe INTERSUP Special cut pieces for stairs 03869 - - -
Additional nickel-plated brass eyelet 04001 - - -
Fixpool opaque model blue/beige

Blue/beige Standard 09291 - - -
blue FIXPOOl INTERSUP
Classification: The cover classification into Standard, non-standard and freeform covers is based on the differ-
ent shapes indicated in the catalogue.
290
Technical Features
TECHNICAL FEATURES TECHNICAL FEATURES

Intersup Eco Covers DeLuxe Intersup Covers
omposition PVC fabric, reinforced double side

C omposition PVC fabric, reinforced double side
C
550 g/m2 550 g/m2
Joints High frequency welding Joints High frequency welding
Borders Perimetral hem, joined by high Borders Perimetral hem, bound together
Frequency welding by high frequency welding
Fixing nickel plated brass eyelets Fixing With straps
+ Double pressed tensor rubber + Dynamometric tensor
+ S.S. anchoring fixture + S.S. anchoring fixture
Distance between rubber tensors = 70 cm Distance between straps = approx.1m
Distance between eyelets = approx. 20 cm. Overlapping = 50 cm.
rid screen Centrally located drainage grid screen
G Grid screen Centrally located grid screen in preshrunk
in pre-shrunk PVC fabric joined by PVC fabric bound together by high fre-
high frecuency welding quency welding.
Standard Supplied in cardboard box with Standard Supplied in cardboard box in a protec-
Packaging instructions leaflet Packaging ted bag and with instructions leaflet
TECHNICAL FEATURES
Fixpool Covers

AND ROLLERS
POOL COVERS
Composition PVC fabric, reinforced double side
550 g/m2
Joints High frequency welding
Borders Perimetral hem, joined by high frequency

welding.
Rigid PE cable inside the hem
Fixing By way of Fixkit
Distance between them = approx. 80 cm
Grid screen Centrally located drainage grid screen
in pre-shrunk PVC fabric stitched to
the cover.
Standard Supplied in cardboard box in a protected
Packaging fbag and with instructions leaflet
291
Accessories for covers
8 mm rubber tensor - 03998 Accessories

S.S. Spike Per unit 03994 - - -
S.S. Spike for lawn Per unit 05732 - - -
Retractable cylindrical spike Per unit 40950 - - -
Retractable anchoring, with spring Per unit 03995 - - -
S.S. Spike - 03994
Dynamometric spring Per unit 03996 - - -

1.50 m black strap for roller Per unit 25980 - - -
8 mm rubber tensor m2 03998 - - -

8 mm x 60 cm Cabiclic rubber tensor Per unit 03999 - - -
Retractable spike - 40950 8 mm x 25 cm Cabiclic rubber tensor Per unit 05736 - - -
1.20 m rubber tensor with hooks Per unit 05734 - - -
Fixkit clip with rubber tensor Per unit 09439 - - -
S.S. Spike for lawn - 05732 Concealable anchoring, with Dynamometric spring- 03996
spring - 03995
Roller 1.50 m black strap - 60 cm Cabiclic rubber tensor 25 cm Cabiclic rubber tensor Rubber tensor with hooks -
25980 - 03999 - 05736 05734
Fixkit clip with rubber tensor

- 09439
292
winter cover installation
IMPORTANT
- Each cover is individually designed according to

its shape, material and fastening.
- To avoid a premature cover wear and tear rubbing
- Against coping material, the following precautions
should be observed when installing it:
- The coping material should not be more than 3
cm thick. Maxi = 3 cm
- The cover warranty will not be applicable in case
of faulty installation, deficient maintenance or
wearing
- Caused by coping elements.
USING CLIPS OR RUBBER TENSORS
AND ROLLERS
POOL COVERS
1) Make holes in the corners at 40 cm from the coping stone edge.

2) Fix the cover at the 4 corners.
3) Parallel to each eyelet, drill the other holes at 40 cm from the coping stone edge.
4) Tension the cover, leaving a certain allowance to the rubber tensors.
N.B.: In very windy regions, we suggest installing double water drains on the side which is most exposed to the wind.
293
winter cover installation
with FIX KIT
1) Drill at the 4 corners at 40 cm from the coping stone edge.

4) Tense the cover, leaving a certain allowance in the elastic belt tension.
with STRAPS
1) Drill at the 4 corners at 40 cm from the coping stone edge.

4) Tense the cover, leaving a certain allowance in the rubber bands.
N.B.: In very windy regions, we suggest installing double water drains on the side which is most exposed to the wind.
294
Storage rollers for covers
Central pipe in anodised aluminium

100 mm
Fixed pipe, length 4.5 m 07622 1 12.0 0.059
Telescopic pipe, length 4 - 5.5 m 07625 1 12.8 0.054
80 mm
Other lengths, available on request
Fixed pipe Telescopic pipe
L B L B
Pipe code N straps Pipe code N straps
(m) (mm) (m) (mm)
07622 4.5 100 8 07625 4.0 - 5.5 95/100 8
07623 5.5 100 8 07626 5.0 - 6.6 95/100 8
07624 6.6 100 10 24762 4.0 - 5.5 75/80 8
30806 5.0 - 6.6 75/80 8
AND ROLLERS
POOL COVERS
Stainless Steel fixed end supports

Set of 2 brackets in "T" shape. Includes steering wheel operation with 8 straps for fixing the cover.
A set of 2 "T" supports in AISI-304 07631 1 4.8 0.035
The pipe is not included in the price
A C
Pipe code
(mm) (mm)
07631 500 514
295
Storage rollers for covers
Stainless Steel mobile support

A set of 2 supports, one "T" end fixed support and the other end support with wheels. Includes 8 straps to tie
the cover.
Supports in AISI-304 07628 1 7.2 0.035
The pipe is not included in the price.
A C
Code
(mm) (mm)
07628 500 650
Fixed support for roller

Two flange fixing supports with adjustable height from 500-800 mm in AISI-304. Fixed to the floor with
flanges. Includes 8 straps for fixing the cover.
07629 1 7.2 0.029
A B
Code
(mm) (mm)
07629 500 to 800 100
Wall support for roller

Pair of wall fixing supports. In S.S. AISI-304. Includes 8 straps for fixing the cover.
Set of 2 supports 07630 1 6.6 0.087
A B C
Code
(mm) (mm) (mm)
07630 500 100 500
296
storage rollers for covers
Roller supports (for larger pools)

Suitable for fixed roller pipes 07622, 07623 and 07624 or telescopic pipes 07625 and 07626, with 1, 2 or
3 rollers and steering wheels and rotating bar wheel for handling covers. Contains of 2 Stainless Steel AISI-304
structures with wheels (1 set with brakes) to move the roller . Includes 8 straps per roller.
2 mobile supports with1 roller pipe 15836 1 36.4 0.937

2 mobile supports with 2 roller pipes 15835 1 27.4 1.46
2 mobile supports with 3 roller pipes 15834 1 28.4 1.46
Mobile supports with 1 pipe.
Mobile supports with 2 and 3 roller pipes.
AND ROLLERS
POOL COVERS
297
Automatic covers
The AstralPool automatic cover

AstralPool is continually incorporating the latest innovations to its products in matters of safety. As such the automatic pool covers have been
developed to meet the demands of the French standard NF P90 308, which guarantees maximum user safety.
The AstralPool automatic covers cover the whole pool and are easily rolled up or spread thanks to their in built motorized roller. The turning of a
key is all that is needed to get it working.
Manufactured with rigid slats available in various colours, their design and composition provide a floating cover which covers the whole of the
water surface and which is very effective as a thermal insulator. To meet the requierments of both existing and new-built swimming pools there are
seven models available, the submerged models Roussillon, Conflent and Ceret, the above-ground models Carlit and Vallespir, and the above-ground
models with protective casing Capcir and Narbonne.
The submerged automatic cover models Roussillon, Conflent and Ceret allow the cover to be completely integrated into the swimming pool. The
mechanical installation is located in a pit annexed to the pool, which is separated by a small concrete or PVC partition.
The above-ground models (Carlit and Vallespir) are the most suitable models for installing in existing pools as the roller is located on the outside
of the pool, anchored to the pool surround.
The above-ground models with protective casing (Capcir and Narbonne) are the basic above-ground models which can be complemented with a
bench that covers the mechanical installation, giving it a high-quality finish. For installation in existing swimming pools.
Main advantages
Increased safety in the swimming pool to protect people and pets from falling accidentally into it. The floating slats cover the entire water sur-
face.*
Very convenient to use, the swimming pool is covered and uncovered in silence by simply turning a key.
Represents a considerable saving:
- It acts as a thermal barrier preventing heat losses and extending the pool use season.
- It is a basic complement for pool heating conditioning.
- It prevents evaporation, therefore it saves water.
- It reduces algae formation, which results in an important saving in chemical products.
In indoor pools no condensation is produced in the enclosed hall, thus avoiding deterioration of building materials.
Lower maintenance costs: reduction of suspended particles.
The automatic cover enables greater customisation of the swimming pool, increasing its value.
AstralPool service
The wide AstralPool commercial network offers immediate service.
We offer our clients pre- and post-sales technical assessment.
The manufacturing technical sheet will be used to make a cover which is perfectly adapted to your needs.
All AstralPool covers undergo strict quality control based on the most demanding regulations.
Assembly and Civil Engineering Manuals are available to allow building the swimming pool with the ideal requirements for subsequent installa-
tion of the submerged cover.
(*) Our automatic covers comply with the requirements of the French standard NF P90-308 which demands the use of standardized safety mecha-
nisms to prevent the risk of drowning by accidental falls into the pool.
298
Automatic covers
Advice for use and winterizing
We recommend to follow these basic indications to obtain the optimum performance from the automatic cover:
Before operating the cover you must ensure that nobody is in the swimming pool and that there are no objects
that could become obstacles to its normal operation.
Maintaining the correct water level is also important, as a level which is too high or too low can cause blockages
at the tie beam, partition or the steps.
During the retrieving and expanding operations the cover should not be blocked, as this action could be danger-
ous as well as harmful to the operating mechanism.
If an automatic pool floor cleaner is used make sure that when the cover is extended neither the hose nor the
power supply cable is caught up.
Regular cleaning of the cover with a pressure cleaning device or with a PVC descaling liquid is recommended.
This will also prevent leaves from settling on the cover which could otherwise stain the slats..
In the case of a hail storm we recommend that you retrieve the cover.
In the Roussillon submerged model we recommend that you always keep the motor housing dry to prevent the
geared motor from getting wet.
For good winterization, and in order to find the pool in the best conditions in the spring, we recommend to take
the following indications:
Leave the cover extended over the water surface.

Keep the water level constant. An excess should be drained through the main drain or the skimmer box.
It is advisable to clean the trapdoor and the motor housing with a high pressure cleaner before the pool is winter-
ized.
Place a number of anti-freeze floats in the trapdoor casing, behind the cover. The skimmers should also be pro-
tected in the same way.
AND ROLLERS
POOL COVERS
We recommend the installation of a plastic type cover to prevent leaves and other substances from obstructing
the trapdoor, which should be cleaned regularly.
In the case of freezing, avoid forcing or pressing down hard on the slats as they could be damaged.
If the motor is in risk of flooding it is advisable to cut off the power supply and remove the motor.
PLEASE FILL IN THE FORM PAGES FOR ENQUIRES...
299
automatic covers: the slats
The slats
The AstralPool automatic cover uses hollow extrusion PVC watertight slats. The end-caps welded at both ends
ensure their floatability. The 20 mm wide cap flaps can assure the total length of the slats. These flaps can
also be of 10 or 30 mm, thus altering the total width of the pool cover.
New AstralPool slats
The slats can be used on immerged models and on Capcir ECO model with solar protection.
SOLAR BLUE Technical aspects
Slat width : 65 mm
Temperature of distorsion : 125C vs 75C for solar PVC
Warranty : 5 years
Conformity : Not conform to norm NFP 90-308
Time for manufacturing : 20 opened days
Spool for an aluminium 146

Pool
mm shaft (shaft used for pools
CRYSTAL CLEAR lenght
up to 6 m wide)
1m 220 mm
2m 290 mm
3m 320 mm 10 mm
4m 360 mm
5m 390 mm
6m 430 mm
TRANSPARENT BLUE 7m 460 mm 20 mm
8m 470 mm
9m 490 mm
10 m 530 mm
11 m 540 mm
12 m 560 mm 30 mm
SOLAR CRYSTAL
Convex side upwards
Flat side in contact with the water
Steps side Roller shaft side
New
SOLAR BLUE CRYSTAL CLEAR TRANSPARENT BLUE SOLAR CRYSTAL
Maximum
Code Code Code Code
width
4.03 m 061547 070066 070071 070076
5.03 m 061548 070067 070072 070077
6.03 m 061549 070068 070073 070078
7.03 m 061550 070069 070074 070079
8.03 m 061551 070070 070075 070080
* For use only in Northern Europe. Not recommended for use below 45 latitude.
For bigger widths, please enquire. ml = meter length.
300
The slats
The slats are 71.4 mm wide and 17 mm thick, guaranteeing their floatability. In order to avoid stains, specially
organic ones, the slats are coated with calcium-zinc.
In order to best integrate the cover into the environment, you can choose from the different slat models: White,
Sand, Opaque Blue, Grey, Translucent Blue* and solar captor*.The slats in translucent blue and solar captor
can only be used in Northern Europe or in areas where there is less solar radiation.
WHITE SAND BLUE GREY

Maximum Maximum Maximum Maximum
Code Code Code Code
width width width width
3.5 ml 34755 3.5 ml 34761 3.5 ml 34758 3.5 ml 40998
4 ml 31168 4 ml 31169 4 ml 31170 4 ml 41000
4.5 ml 34756 4.5 ml 34762 4.5 ml 34759 4.5 ml 41001
5 ml 31172 5 ml 31173 5 ml 31174 5 ml 40761
5.5 ml 34757 5.5 ml 34763 5.5 ml 34760 5.5 ml 41002
6 ml 31176 6 ml 31177 6 ml 31178 6 ml 41003
7 ml 31900 7 ml 31901 7 ml 31902 7 ml 40762
8 ml 31905 8 ml 31906 8 ml 31907 8 ml 41004
9 ml 35132 9 ml 35134 9 ml 35137 - -
10 ml 35133 10 ml 35135 10 ml 35138 - -
11 ml 33112 11 ml 35136 11 ml 33343 - -
* For use only in Northern Europe. Not recommended for use below 45 latitude.
For bigger widths, please enquire. ml = meter length.
AND ROLLERS
POOL COVERS
.
Step slats
In order to adapt to any swimming pool shape, 3 different geometric shapes are offered, thus ensuring a perfect
fit to the outline of the swimming pool and maximum safety.
The available shapes are Roman steps, Straight steps and Trapezoidal steps.
301
Step slats
method to calculate of steps slats
ROMAN steps
Location:
It must be located on the side oppo-
site to the cover motor.
Step price:
Roman step pricelist.
STRAIGHT STEPS
Location:
a) Located in front of the cover motor.
Step price:
Straight step price.

Location:
b) Located netxt to the cover.

Step price:

Slat pricelist per metre lenght D x (C + 1 m).
The lenght of side D includes the

width of the pool A+ E (width of steps).
NOTE FOR SIDE STEPS:

Calculation of the total slat price:
Steps price + slat price (A x B)

isosceles TRAPEIZOIDAL STEPS

Location:
Located in front of the cover.
Step price:
Trapezoidal step pricelist.
rectangular Trapezoidal slats
Location:
Location: b) Located next to the cover
a) Located in front of the cover
Step price:
Step price: Slat price per metre lenght

Trapezoidal step price. D x (C + 1 m) + slat cutting surcharge
for custom cutting per metre lenght.
The lenght of rollers includes the

width of the pool A + the depth of the

steps E.

NOTE FOR LATERAL STEPS:
Calculation of total slat price: Step
price + slat price (A x B))

302

automatic covers: slats
Step slats
New
Description Solar Blue Crystal Clear Transp Blue Solar Crystal
Square-cut Roman ladder
3m 061604 070081 070091 070101
4m 061605 070082 070092 070102
Shape-cut Roman ladder
3m 061610 070083 070093 070103
4m 061611 070084 070094 070104
Straight steps
2 x 1.5 m 061606 070085 070095 070105
2.5 x 2 m 061607 070086 070096 070106
Square-cut trapezoidal ladder
base 3 m 061608 070087 070097 070107
base 4 m 061609 070088 070098 070108
Shape-cut Trapezoidal ladder
base 3 m 061612 070089 070099 070109
base 4 m 061613 070090 070100 070110
Description White Sand Opaque Blue Grey Blue traslucid*

Square-cut Roman ladder
3m 31182 31183 31184 41043 31185
4m 31186 31187 31188 41044 31189
Shape-cut Roman ladder
3m 37094 37188 37190 41045 37192
4m 37095 37189 37191 41046 37193
Straight steps
2 x 1.5 m 31190 31191 31192 41047 31193
2.5 x 2 m 31194 31195 31196 41048 31197
Square-cut trapezoidal ladder
3 m base 31198 31199 31200 41049 31201
4 m base 31202 31203 31204 41050 31205
AND ROLLERS
POOL COVERS
Shape-cut trapezoidal ladder
3 m base 37098 37196 37198 41051 37200
4 m base 37099 37197 37199 41052 37201
Two finishing options: Square-cut and Shape cut

*For use only in Northern Europe. Not recommended for use below 45 latitude. For larger widths, please ask. ml = lineal metres
Code Step Accessories

31206 Clamp to block steps
31180 Special square cnt for free form
38735 Special free form cnt
303
automatic covers: submerged models
Roussillon submerged model

The Roussillon automatic cover is the submerged model which incorporates the motor in a separate pit, and
both the roller shaft as well as the cover are housed at one end inside the pool itself.
The submerged pit containing the roller shaft from the main pool should be separated from the main pool by a
small concrete partition at the time of construction or with a PVC partition later on.
The basic elements for assembling the cover are the slats, the step slats, the mechanical kit, the embedding
kit, the aluminium tie beam and the pit cover.
Coping stone
Pit cover Cover Water level
Skimmer
MECHANICAL KIT
Includes the following elements:

- 146 mm extruded aluminiumroller roller shaft,
5 mm thick and 30 mm connecting shaft.
- Motor supporting bracket.
Extruded aluminium shaft - Watertight gaskets on the wall conduit side. Overflow
- Watertight gaskets on bearing support side.
- 24 V geared motor with stainless steel support
bracket. to plant
- 220/24V standard switchboard. room Main drain
- On-off key switch.
Should be installed in full view of the pool. It operates with the key in the continuous contact position.
Maximum pool Reducer motor

On-off key switch Extruded shaft Code
dimensions Nm
4x12 m 5 mm thick Aluminium shaft 146 120 Nm 31144
7x15 m 3 mm thick Aluminium shaft 168.3 250 Nm 31904
8x15 m 3 mm thick Aluminium shaft 168.3 250 Nm 31909
8x16 m 3 mm thick Aluminium shaft 168.3 600 Nm 31909-006
Geared motor 220/24V operation 9x22 m 2 mm thick Aluminium shaft 300 600 Nm 34767
24 V switchboard 10x22 m 2 mm thick Aluminium shaft 300 600 Nm 34768
EMBEDDING KIT
Includes the following elements:
- Wall conduit .
- Bearing support bracket for embeding.
- Embeding parts (2) for tie beam support bracket.
- Watertight gaskets for wall conduits
Embedding Kit Code

310 mm wall conduit
Embedding kit with 210 mm conduit 31143
Embedding kit with 310 mm conduit 33074
ROUSSILLON MODEL ASSEMBLY drawing
Pit
Bearing housing for embedding Motor
Drain
Roller shaft
Tie beam stand embedding piece
304
Submerged model Conflent

The motor is integrated into the interior of the roller shaft and can be installed in existing pools of up to 6
meters wide.
As in the Roussillon model the submerged part containing the roller shaft should be separated by a small
concrete partition at the time of construction or later with a PVC partition. The slat colours available for both
models are white, beige and opaque blue.
Maxi. pool dimensions Motor (Nm) Code
Conflent
Pool 4 x 12 m 250 (shaft with limit switch) 33070
Submerged model Ceret

The submerged automatic cover Ceret is specially designed for new-built or existing pools of up to 6 metres in
width. The motor, placed at water level, is integrated into the roller shaft.
The submerged zone containing the roller shaft can be separated by a small concrete partition at the time of
construction or with a PVC partition later on.
The basic elements for cover assembly are the slats, the step slats, the mechanical kit, the embedding kit, the
aluminium tie beam and the pit cover.
It has the same technical features as the Roussillon model: easy to install in both existing and new-built pools.
It blends in perfect harmony with the pools surroundings. It is also easy to maintain thanks to the motor loca-
tion, situated at water level.
The mechanics are made up of:

- 150 Nm motor equipped with a limit switch system.
- 2 stainless steel brackets: bearing part and motor part with only the gear transmission.
- A 220 V/24 V power supply unit with a remote key switch.
Max. pool dimensions Motor Code
Ceret
AND ROLLERS
POOL COVERS
Pool 4 x 12 m shaft with limit switch 33759
WATER LEVEL NEEDED: 120 mm from the pool border.
Connection box
Stainless Steel bracket Limit switch sensors
305
Ceret roller with solar heating feature

It is suitable to cover swimming pools up to 6 x 12 meters with ladder and floating slats cover.
Max. pool dimensions Code
Pool 4 x 12 m 45770
Pool 5 x 12 m 45771
Pool 6 x 12 m 45772
Submerged models: Accessories

THE TIE BEAM
Its function is to provide support to the pit cover. Manufactured in white coated aluminium, it measures 100
x 110 mm and weighs 9 kg/ml.
This tie beam is delivered with coated stainless steel support bracket and stainless steel nuts and bolt
The beam standard bracket
Note: The anti-flex support bracket is essential for more than 6 m.
Beam length Code

White beam + Standard bracket
UP TO 4 meters 31148
From 4 m to 5 m 31149
From 5 m to 6 m 31150
The beam adjustable bracket From 6 m to 7 m 31911
From 7 m to 8 m 31912
Sand beam + Standard bracket
From 4 m to 5 m 38530
From 5 m to 6 m 38531
From 6 m to 7 m 38532
From 7 m to 8 m 38533
White beam + Stand for liner holding vertical profiler
UP TO 4 meterss 33870
From 4 m to 5 m 33871
From 5 m to 6 m 33872
From 6 m to 7 m 33873
From 7 m to 8 m 33886
Sand beam + Stand for liner holding vertical profile
UP TO 4 meterss 38534
From 4 m to 5 m 38535
From 5 m to 6 m 38536
From 6 m to 7 m 38537
From 7 m to 8 m 38538
White beam + Support brcket for fastening to the pool wall
From 4 m to 5 m 33875
From 5 m to 6 m 33876
White beam + Adjustable bracket
From 4 m to 5 m 35718
From 5 m to 6 m 35719
From 6 m to 7 m 35720
From 7 m to 8 m 35721
Sand beam + Adjustable bracket
From 4 m to 5 m 38540
From 5 m to 6 m 38541
From 6 m to 7 m 38542
From 7 m to 8 m 38543
306
Submerged models: Accessories

THE PIT COVER
The pit cover protects the automatic cover operating unit and conveys an aesthetic improvement to the sur-
roundings. It is available in IPE wood, or in white aluminium.
Pit cover composite avaialbe in two colors: Grey and wood colours. Composite material is fully adherete, even
when wet, and it has a hardness equivalent to the hardest solid woods. As a material insensitive to climate
change, durability and resistance are one.
Pit cover of IPE wood For pools with a partition wall the cover will be 950 mm wide, while for pools with a PVC partition the 700
mm lid will be used.
The pit cover Code

IPE wood 1.00 x 0.70 m 31152
IPE wood 1.00 x 0.95 m 31153
IPE wood made to measure, m2 31154
White aluminium 1.00 x 0.70 m 33679
White aluminium 1.00 x 0.95 m 33680
White aluminium made to measure, m2 33681
Sand aluminium 1.00 x 0.70 m 38512
Sand aluminium 1.00 x 0.950 m 38513
Sand aluminium made to measure, m2 38514
Pit cover of white aluminium
Composite wood colour 1.00 x 0.70 m 53864
Composite wood colour 1.00 x 0.95 m 53865
Composite grey colour 1.00 x 0.70 m 53866
Composite grey colour 1.00 x 0.95 m 53867
PVC PARTITION
The partition can be made of concrete or PVC. It is designed to improve safety by preventing bathers from
coming into contact with the roller shaft. It also prevents the pool-floor cleaning hose from being rolled up into
the slats.
The partition is made up of 300 mm high PVC panels, internally reinforced with stainless steel. It is fastened
with two white coated stainless steel U clamps, which are fastened to the tie beam support bracket.
Will be fastened to vertical walls
Pit cover of composite For pools of more than 6 m width ask your AstralPool branch.
Water Pit cover Partitions Code

level
Tie beam Partition Sand colour + Stainless Steel 900 mm x 4 m 38515
AND ROLLERS
POOL COVERS
Partition Sand colour + Stainless Steel 900 mm x 5 m 38516
S.S. U clamps colour Sand H 900 mm for fastening on the wall 38736
S.S. U clamps colour White H 1200 mm on beam bracket 38549
S.S. U clamps colour White H 1500 mm on beam bracket 38550
S.S. U clamps colour Sand H 900 mm on beam bracket 38551
Partition S.S. U clamps colour Sand H 1200 mm on beam bracket 38552
S.S. U clamps colour Sand H 1500 mm on beam bracket 38553
Partition panel with

900 mm high U clamp 1200/1500 mm high U clamp
stainless steel reinforcement
307
Automatic covers: above-ground models
N-Carlit above ground model

Automatic above-ground cover perfect for existing pools with limit switch up to:
- 3 x 18 m + stairs
- 4 x 17 m + stairs
- 5 x 17 m + stairs
- 6 x 16 m + stairs
- 7 x 14 m + stairs
Note that as it is an above-ground model cover, the storage rollers must be placed out of the pool, fixed to the
floor.
MECHANICAL KIT:
Consists of:
- Two white or sand colour coated stainless steel stands
- 146 mm anodised aluminium roller shaft.
- 24V tubular motor with limit switch adjustment, or 12 volts depending on the pool width.
- Key switch with self return to 0 point
- Switchboard with 220/24V transformer.
Colour Colour
white / black white / white
Mechanical kit up to 3.03 x 12 meters 54136 54146

Coping
stone Cover
Water level
Skimmer
Overflow
To plant
room
N-Carlit Eco above ground model

Automatic above-ground cover perfect for existing pools without limit switch up to:
- 5 x 10 m + stairs
Colour Colour

308
N-Carlit Manual above ground model

Manual roller that can cover pools up to 5 x 10 m using floating slats.
Consist of:
- Two white or sand color coated stainess steel stands.
- One Roller shaft.
- One integrated reducing gear to facilitate the cover roll up.
- One crank.
Optional: kit to automate the equipment by electric motor.
Colour Colour

Carlit Solar Pool cover

The automatic solar pool cover Carlit runs on solar energy, making it a very environmentally-friendly product. It
reduces water evaporation and heat loss in your pool. The cover also minimises premature evaporation of pool
chemicals. Certified by the French standard NF 90-308, the Carlit solar pool cover guarantees higher quality,
reducing possible accidents arising from children, animals, or objects falling into the water.
Precautions for installation: THE SUN MUST DIRECTLY COME INTO CONTACT WITH THE PHOTOVOLTAIC
PLATE. DO NO INSTALL UNDER A TREE OR FACING NORTH.
Main advantages:
- Easy to install, no cabling required (solar powered).
- 40-cycle independence: once the battery is fully charged, in the absence of further light the cover can be
extended and retracted 40 times.
- Easy to use cover with low maintenance costs.
General features:
- It allows pools up to 6 x 12 m with step area to be fully covered
- Geared motor powered by solar energy. One of the supports features a photovoltaic cell.
- Tubular 150 Nm 12 v. geared motor. Anodised aluminium pipe.
AND ROLLERS
POOL COVERS
- Limit switch memory system.
- 3 different slat and end piece colours are available: white, sand and blue.
- Two 12 volt battery.
Mechanical pool cover coding Code

Mechanical kit up to 4 m (up to 4 x 12 m) 35917
Mechanical kit up to 5 m (up to 5 x 12 m) 35918
Mechanical kit up to 6 m (up to6 x 12 m) 35919
309
Above-ground: Vallespir model

Motor located at the foot of the roller shaft. Ideal for existing pools of up to 7.5 metres in width. It is composed
of:
Two white coated aluminium stands, RAL 9016, with fixing plates prepared for fastening to the coping stone,
equipped with two white polyester covers.
Roller shaft in anodised aluminium for pools of up to 5 m and 24 V 120 Nm geared motor with limit switch.
168 mm diameter stainless steel roller shaft for pools of more than 6 m in width, 24 V 120 Nm geared motor
with limit switch.
220/24 V Electrical power control cabinet.
Remote control switch, in full view of the pool, with 3 fixed positions according to the French standard NF
P90-308.
Maxi. pool dimensions Motor (Nm) Code
Vallespir
Pool 4 x 12 m 120 33087
Pool 5 x 12 m 120 33088
Pool 6 x 12 m 250 33089
Pool 7.5 x 15 m 250 33090
Automatic covers: above-ground models with protective casing
Above-ground models with protective casing: Capcir and Narbonne

Easy to install and to start operating, ideal for installing in existing pools. They incorporate protective casing for
the covers operating mechanical unit, providing greater safety and improving the design. It is ideal for pools
of up to 6 metres in width.
On the Capcir model the motor is located in one side of the roller shaft, integrating perfectly with the cover cas-
ing. It ensures easy handling of the motor in the case of breakdowns or servicing. The panel-protected casing
is available in white PVC or IPE wood. CAUTION: DO NOT SIT ON IT NOR USE IT TO DIVE.
Its main elements are a 146 mm anodised aluminium roller shaft, a geared motor of 120 Nm or 250 Nmotor,
an electric cabinet and a 3-position key switch in accordance with the French standard NF P90-308.
In the Narbonne model the motor is located inside the roller pipe itself in such a way that it is completely
blended into the pool surroundings. The casing is protected by wood PVC or IPE timber.
Its main elements are a 12V, 150 Nm tubular motor with limit switch, a key switch with automatic return
incorporated in the lstand cover and a switchboard with a transformer.
Motor
Maxi. pool dimensions Code Code Code Code
(Nm)
White PVC Sand PVC PVC wood colour IPE
casing casing casing casing
non-dismount- dismountable non-dismount- dismountable non-dismount- dismountable
Protective casing able able able
Narbonne
Pool 4 x 12 m 150 33432 41061 41056 41059 37139 41063 37109
Pool 5 x 12 m 150 33433 41062 41057 41060 37140 41064 37110
Pool 6 x 12 m 150 37112 - 41058 - 37141 - 37111
310
Automatic covers: above-ground models with protective casing
Above-ground models with protective casing: Solar Narbonne

The automatic solar cover works with solar energy and stands out as it is highly environmental. Keeps water
from evaporating and reduces the loss of heat in the pool. On the other hand, it minimizes early evaporation
of chemical products. Certified by the French NF 90-308 standard, the solar cover guarantees higher quality,
reducing possible accidents due to children, animals, other objects falling into the pool PRECAUTIONS FOR
USE: DO NOT SIT DOWN ON IT OR USE IT TO DIVE. Precautions for installation: THE SUN MUST DIRECTLY
COME INTO CONTACT WITH THE PHOTOVOLTAIC PLATE. DO NO INSTALL UNDER A TREE OR FACING
NORTH.
Main advantages:
- Easy to install, no cabling required (solar powered).
- 40-cycle independence: once the battery is fully charged, in the absence of further light the cover can be
extended and retracted 40 times.
- Easy to use cover with low maintenance costs.
General features:
- Covers pools of up to 6 x 12 with stairs
- Roller powered by solar energy
- Two 12 volt batteries
- Limit switch memory system
- 3 types of casings possible: PVC, wood coloured PVC and timber Access to the motor through the base of the
casing
- 150 Nm 12 volt motor.
- Possibility to ask for a dismountable casing to have access to slats
- Access to the motor without touching the slat casing.
- The casing is protected with PVC, wood coloured PVC or IPE timber sheets.
Motor
Maxi. pool dimensions Code Code Code Code
(Nm)
White PVC Sand PVC PVC wood IPE
casing casing casing casing
non-dismount- dismountable non-dismount- dismountable non-dismount- dismountable
Protective casing able able able
Narbonne Solar
Pool 4 x 9 m 150 37561 41068 41065 41070 37564 41072 37567
Pool 5 x 12 m 150 37562 41069 41066 41071 37565 41073 37568
Pool 6 x 12 m 150 37563 - 41067 - 37566 - 37569
AND ROLLERS
POOL COVERS
Above-ground: Price calculation

CALCULATING THE PRICE
A.- Calculate the total length of slats according to the water surface length of the pool. Calculate the price of the
slats according to the price per m and the pools maximum width.
B.- To calculate the total price add up the following aspects:
Price of the slats.*
Price of the step slats.*
Price of the mechanical kit (taking into consideration the pools maximum width).
Cover strap fasteners.
C.- Available options to be added to the above total cost:
Slat accessories
*For pools with straight or lateral trapezoidal steps check pages 397 and 398.Carli
311
automatic covers: Commercial and municipal models
Commercial roller model Borna

This shaft is aimed to install on commercial indoor or outdoor swimming pools of 12.5 x
25 meters maximum. It can be used for bubble or reinforced polyethylene foam covers.
The distance between the roller shaft and the pool edges must be reduced as much as
possible to prevent abnormal wear and tear due to the friction on the coping.
Technical features:
- 24 V 250 Nm motor.
- 300 mm stainless steel shaft.
- Thermoplastic bearings fitted with stainless steel bearing.
- Motor protection cover in thermoformed ABS.
- Remote control + key.

Mechanical kit up to 12.5 m 38734 - - -

(max. 12.5 x 25 m)
Municipal model Double

Suitable to cover municipal swimming pools up to 15 x 25 m with bubble or polyethylene based foam cover.
Technical features:
- 2 tubular motors of 120 Nm and 24 Volts.
- 2 aluminium shafts.
- 6 wheels.
Width 6.03m Length 25m 41441 - - -

Width 8.03m Length 25m 41442 - - -
Municipal model Aerial

Suitable to cover municipal swimming pools up to 12.5 x 25 m with bubble or polyethylene based foam cover.
Technical features:
- 150 x 150 mm white coated aluminium supports.
- Stainless steel shaft.
- Motor 250 Nm 12 Volts.

Width 12.53 m Length 25 m 41810 - - -
312
Automatic covers: Display models
Carlit display model (without motor)

Width: 1.5 metres with blue, white and sand colour slats.
33764 1 - -
Carlit Solar display model ( without motor )

Width: 1.5 m. With blue, white and sand colour slats.
38740 1 - -
Capcir display model (without motor)

Width: 1.5 m. Casing half IPE timber and half PVC.
33765 1 - -
AND ROLLERS
POOL COVERS
Narbonne Solar display model (without motor)
Width: 1.5 m. Timber + PVC slats.

38821 1 - -
313
automatic covers: Accessories
Cover accessories
We offer a list of accessories for both the use and the maintenance of the automatic cover.
Accessories Code
Lift-prevention bracket in ABS for wall fixing + belts 34754

ABS bracket + S.S. support to install under the coping stone + belt 35131
Holding and lifting straps Bracket slat plug - overflow pool 31943
Lift-prevention bracket
Sky for above-ground cover model 31944
ABS fixture for wall fixing
35131
34754 31944
In compliance with the French standard NF P90-308 for swimming pool covers the following straps will be
supplied according to depending on the kind of cover and the swimming pool:
Submerged models and above-ground models with protective casing:
Cover with steps: 3 units
Cover without steps: 2 units

Above-ground models:
Cover with steps: 5 units (2 on the motor side and 3 on the steps side)
Cover without steps: 4 units (2 on the motor side and 2 on the opposite side)
Automatic covers: Sheets manufacturing
See automatic covers manufacturing sheets in the PDB (Products Database)

of AstralPool, available in www.astralpool.com.
314
pvc accessories for pools
PVC accessories
for pools
316 Pressure fluid handling PVC PN-16 fittings

318 Pressure fluid handling PVC accessories
320 Filter ring manifold for 3/4 laterals
320 Filter ring manifold for 1 laterals
321 Filter diffuser
321 Collector pipe for valve manifold
PVC ACCESSOIRES
FOR POOLS
315
Pressure fluid handling PVC PN-16 fittings
PVC 90 elbow solvent socket

Packing Weight Kg Volume m3
50 mm 32588 70 8.67 0.0408
63 mm 32589 36 7.86 0.0408
PVC 45 elbow solvent socket

50 mm 32590 40 3.72 0.0204
63 mm 32591 20 3.56 0.0204
PVC-Tee 90 solvent socket

50 mm 32592 48 8.95 0.0408
63 mm 32593 30 9.73 0.0408
PVC union solvent socket

50 mm 32594 60 4.48 0.0204
63 mm 32595 35 3.98 0.0204
316
PVC reducing bush solvent socket

63 mm x 50 mm 32596 48 3.08 0.0102
PVC adaptor nipple: solvent socket & BSP male thread

50 mm x 40 mm x 11/2 32597 24 2.48 0.0102
63 mm x 50 mm x 2 32598 38 5.84 0.0204
PVC adaptor nipple: female solvent socket & BSP male thread

50 mm x 11/2 32599 48 3.27 0.0102
63 mm x 2" 32600 50 5.60 0.0204
PVC ACCESSOIRES
FOR POOLS
PVC 3 piece union solvent socket

50 mm 32601 30 5.80 0.0204
63 mm 32602 12 4.44 0.0204
317
PVC 3 piece union: female solvent socket & BSP male thread

50 mm x 11/2 32603 30 6.70 0.0204
63 mm x 2" 32604 12 5.24 0.0204
Pressure fluid handling PVC accessories
3-way rotay disc valve

3-way control valve in PVC-U with rotary damper for the change of flow. Usable in circuits where the working
pressure not exceeding 6 bar (90 psi), with visual indicator of the closed way. Size: D50-63 and D63-75. Avail-
able manual operation (with handle) or automatically (with electric actuator). Designed for use in pools and
spas, it has a distribution system designed to provide optimal regulation of flow to each output with ease of
handling. Manual valve allows 2-ways opened, 3-way opened or partially adjustable open, while electric actua-
tor can turn 90 or 180 and 230 or 24 Vac connection.
3 ways rotary disc valve D63/75 41862 4 - 0.041

Automatic 220 Vac - D63/75 41864 1 - 0.041
Automatic 24 Vac - D63/75 43730 1 - 0.041
3 ways rotary disc valve D50/63 15765 8 - 0.041
Automatic 220 Vac - D50/63 41863 1 - 0.041
Automatic 24 Vac - D50/63 45866 1 - 0.041
PVC ball valve PN-10

HDPE (polythene) ball seat. EPDM O-rings. "Antiblock" system.
50 mm 41941 10 7.61 0.0204

63 mm 41942 9 11.80 0.0408
PVC pipe PN-10

40 mm 02708 - - -
50 mm 02709 100 m 45.0 1.14
63 mm 02710 100 m 72.0 1.40
75 mm 02711 - - -
90 mm 02712 - - -
110 mm 02713 - - -
125 mm 02714 - - -
140 mm 02715 - - -
160 mm 02716 - - -
180 mm 02717 - - -
200 mm 02718 - - -
250 mm 02719 - - -
315 mm 02720 - - -
318
Pressure fluid handling PVC accessories
Semi-rigid hose
Made of PVC to glue to pressure fittings using PVC adhesive grey colour.
16 mm 34587 25 m 3.2 0.030
16 mm 34586 50 m 6.2 0.040
20 mm 30754 25 m 4.0 0.040
20 mm 28570 50 m 9.1 0.060
25 mm 30755 25 m 6.0 0.050
25 mm 28571 50 m 11.0 0.042
32 mm 30756 25 m 9.6 0.070
32 mm 28572 50 m 16.7 0.065
40 mm 30757 25 m 12.3 0.110
40 mm 28573 50 m 23.0 0.109
50 mm 30758 25 m 18.4 0.150
50 mm 28574 50 m 37.0 0.178
63 mm 28575 25 m 49.5 1.140
75 mm 34588 25 m 33.3 0.300
Cleaner PVC

0.5 l 02432 15 8.1 0.026
1 l 02431 12 11.0 0.036
Solvent cement PVC

0.25 l 02429 30 10.0 0.024
0.50 l 02427 15 8.0 0.026
1 l 02426 12 13.0 0.036
0.50 l with paint brush 09043 - - -
1 l with paint brush 09044 - - -
PVC Cleaner
PVC ACCESSOIRES
Liquid cleaner specially adequate for cleaning and degreasing pipes, coupling sockets and other PVC rigid fit-
FOR POOLS
tings before gluing them together, and for removing excess glue.
Cleaner 500 ml 28827 - - -

Cleaner 1000 ml 28828 - - -
PVC-Gel - Special for PVC pipe

For large diameter pressure pipes. Slow setting time, the allowing correct positioning of the fittings and perfect
cementation. Supplied with brush.
250 ml 56217 36 11.18 0.02
500 ml 56218 24 13.50 0.02
1000 ml 57221 12 12.90 0.02
319
Filter ring manifold for 3/4 laterals
Blue Adhesive, extra quick drying for flexible and rigid PVC pipes
Special for pools. For use in pool installations. Its high Gel composition and covering capacity gives perfect
cementation. Supplied with brush.
250 ml 57680 36 11.20 0.02

500 ml 57682 24 13.50 0.02
1000 ml 57683 12 12.90 0.02
8 lateral ring manifold

Made of PVC, inner 50 mm and outer 63 mm.
00624 12 4.0 0.017

Made of PVC, inner 63 mm and outer 75 mm.
00625 6 3.0 0.310
3/4 Laterals
0.3 mm slots.
Length 225 mm 00626 50 2.0 0.017
Length 160 mm 00627 50 2.0 0.017
Length 110 mm 00628 50 2.0 0.008
Length 100 mm (for prolonging) 00629 50 2.0 0.008
Bush coupling
For laterals. In PVC.
Inside threading 3/4 00630 50 2.0 0.003
Filter ring manifold for 1 laterals
8 laterals ring manifold

Made of PVC, inner: 50 mm and outer: 63 mm.
06433 12 4.0 0.017
320
Filter ring manifold for 1 laterals

Made of PVC, inner: 63 mm and outer: 75 mm.


06434 6 3.0 0.310
1 laterals
0.3 mm slots.
Length 225 mm 06435 50 2.0 0.017
Length 160 mm 06436 50 2.0 0.017
Length 110 mm 06437 50 2.0 0.008
Length 100 mm (extensions) 06438 50 2.0 0.008
Bush coupling
For laterals. In PVC.
Inner threading 1 06439 - - -
Filter diffuser
For 50 mm Pipe

00645 6 1.0 0.009
For 63 mm Pipe

PVC ACCESSOIRES
00646 6 2.0 0.023

FOR POOLS
Collector pipe for valve manifold
Collector pipe for valve manifold

Made of PVC. Inlet connections, inner 50 mm and 63 mm. Outlet connections 50 and 63mm.
Connections 50 mm 31877 1 - -
Connections 63 mm 34407 1 - -
321
Spas and Saunas
SPAS and
saunas
324 Colour chart for spas

325 Ranges
326 Optional AstralPool finishes
327 Standard AstralPool finishes
328 Residential spas in wood cabinet - ADVANCE
333 In-ground residential spas
335 In-ground overflow commercial spas
342 Compact filtration for spas
343 Complements for spas
351 Air blowers
352 Sauna
353 Sauna accessories
SPAS AND
SAUNAS
323
Spas and Saunas
We have a wide range of finished units for all kinds of applications; whether to be added to a private home or public facilities
such as gyms, hotels or spas.
RESIDENTIAL SPAS IN WOOD CABINET
Spas for PRIVATE USE equipped with massage pumps, a water heater and a control panel. Enables filtration through a cartridge
filter and automatic water heating.
With a synthetic or natural wood cabinet, or a metal structure.
We have two ranges of spa with cabinets:
ADVANCE: Fully equipped models. Top-end spas om an elegant, modern design.
ESSENTIAL: Functional, modern spas. A basic series with a high quality finish.
IN-GROUND RESIDENTIAL SPAS
Spas for PRIVATE USE, designed to be embedded. Equipped with all the necessary accessories for hydro massage and an adjust-
able bracket for easy installation. Each model includes a compact filtration unit that adapts to the needs and specifications of
the product.
COMMERCIAL SPAS WITH OVERFLOW CHANNEL AND COMPACT UNITS
These Spas are designed for COMMERCIAL USE and are made to be embedded. Equipped with overflow channel and also all the
necessary accessories for hydro massage.
Each Spa includes a compact filtration unit that adapts to the specifications of each model.
Colour chart for spas
N 44 WHITE N 46 BLUE MARBLE N 58 GRANITE SAW
N 59 STERLING N 64 PEARL SHADOW N 72 PERLA CAMEO
IMPORTANT:
When placing orders, kindly indicate after the code number the numbers for the shell colour.
Example: 38848S1200 CL XX
324
Spas and Saunas
Ranges
Residential spas with wood cabinet coding

The coding structure for the wood cabinet spas is made up of 10 digits. The first 5 digits refer to the Spa model and the following ones indicate
the range, coating and the colour of the accessories as it is also necessary to specify the colour.
This coding system will be structured in the following way:
XXXXX X X X XX CL XX
Cabinet Accessories
Spa model Range Complements Variation Colour
versions colour
Position from 1 to 5: 5 numbers of standard codification
Position 6: Product range definition

S Standard
L Luxe
Position 7: Cabinet version
0 Ipe
1 Grey
4 Metallic structure
E In-ground Spa, for compact kit version
K Graphite
M Afronatur
Position 8: Accessories colour definition
0 White
2 Grey
3 Chrome-plated
Position from 9 to 10: Options configuration definition
00 Std + Cover
03 Std + Cover + Audio
05 Std + Cover + ECOSpa
20 Std + Cover + Lumiplus
34 Std + Cover + Lumiplus + ECOSpa + Audio
Habillage des meubles
Graphite: Afronatur: Coastal Grey: Ipe:

New New
SPAS AND
SAUNAS
While stocks last While stocks last
We reserve the right to change, wholly or partially, the features of our products and the contents of this document, without prior notice.
325
Spas and Saunas
Optional AstralPool finishes
EcoSpa thermal insulation

EcoSpa is one of the best thermal insulation systems currently available in the market. This comprehensive
system manages to minimise heat loss by convection and conduction, and to use the heat generated by the
heater and pumps found in the spa. The walls have an exclusive 30 mm thick layer of polyurethane foam insu-
lation. A strong ABS substructure of insulating plastic at the bottom of the spa ensures total water tightness.
Finally, an isothermal cover of between 100 and 130 cm thick gives extra insulation.
All of these features reduce heat loss to a minimum and maximise the recovery of the heat generated by the
spa's components, thus reducing energy consumption by up to 51% and making it possible to save over 2,000
kWh a year. Your spa will be kept at 37 C in outdoor environments with an average temperature of 14 C.
EcoSpa option
LumiPlus + Bluetooth Audio System, only available for fully skirted portable spas
Natural treatments are one of the main sources of health provided by a spa. Chromotherapy and music therapy
are the perfect accompaniment to any hot tub.
Chromotherapy is a natural technique based on the use of colours to help your body and mind find their natu-
ral physical, mental and emotional balance. By choosing the LumiPlus option, 5 LED spotlights are added to
your spa so that you can enjoy a spectacular ambient lighting system. Thanks to the 5 LED spotlights, you can
choose the colours that match your mood at any given time.
The new Bluetooth Audio System enables music to be played from any mobile phone, MP4 player or audio
equipment via a simple Bluetooth connection, without the need for any cables and with coverage of up to 7
metres. It comes with a Bluetooth 3.5 mm audio jack so that you can enjoy up to 7 hours of your choice of fine
music with maximum sound quality, thanks to the subwoofer and the four ambient speakers. Now you can
truly make your spa a centre of relaxation, health and beauty.
LumiPlus option + Bluetooth Audio System option
Chromotherapy LED spotlight, for public spas only

The Mini LED spotlight is the best option for lighting public spas. Thanks to the high intensity LEDs, lighting
is similar to that attained with conventional lamps.
The new range of LumiPlus Mini LED 2.0 projectors has a multitude of possible colour combinations and se-
quences with higher light intensity and better energy efficiency, which result in an 80% saving on electricity
consumption compared with conventional projectors, as well as 100,000 hours of useful life time without the
need for maintenance.
Chromotherapy LED Spotlight option
326
Spas and Saunas
Standard AstralPool finishes
Balboa Electronics, standard in all spas

AstralPool only uses new generation control systems made by BALBOA, a leading supplier of electronic controls
for hydromassage tubs and spas.
With the continual improvements made to its designs and its innovative solutions to increase the quality and
reliability of its systems, the Balboa EL/GL and VS/GS family of control systems has been designed using
patented M7 technology for temperature and flow sensors, and its new universal control system increases the
flexibility of its functions and reduces installation and configuration problems.
These characteristics make the controls even more reliable, easier to install and easier to use.
Ozone, standard in all portable spas

Ozone is "active oxygen", a special element found in nature. Ozone is a powerful oxidising agent and, unlike
traditional chemical products, it does not leave toxic waste behind, and when it has done its work it simply
turns back into oxygen. Moreover, tests have proved that it effectively kills bacteria and mould.
AstralPool manufactures spas that give high quality performance and it supplies an integrated ozone generator
as a standard feature in all of its portable spas. The ozonator has numerous benefits: the water in spas will be
safer, cleaner, purer, free of chloramines, trihalomethane and other chlorine by-products, with a high redox po-
tential. Greater water clarity and algae control are obtained using lower concentrations of chemical substances.
A spa with water purified with ozone is one of the most pleasant relaxation and hydrotherapy experiences.
Aroma, only available for portable spas with a blower

Aromatherapy offers the therapeutic properties of pure aromas for a natural treatment and makes a significant
contribution in helping to restore your natural state of balance and harmony.
SPAS AND
SAUNAS
Nobody is indifferent to smells. They bring to mind emotions, memories and ideas. Increase the relaxing effect
of your tub by adding a fragrance!
327
Spas and Saunas
Residential spas in wood cabinet - ADVANCE
Evolution - Code 32474
TECHNICAL FEATURES
Size 233 x 233 x 91 cm ( 1cm)
Jets + nozzles 48 + 24
Drainage 1
Positions (Seats / Loungers) 5 (3 / 2)
Water capacity 1610 l
Empty/Full spa weight 384 Kg / 1,994 Kg
Config. required power 6.210 W / 26.99 A
Massage pump 2 x 2.500 W

Blower 1.200 W
Filtration pump 280 W
WHITE COLOUR (44)
Electric heater 3 kW
Voltage 230V o 400V III
Headrests 3
Description Code Hard Cover Yes
Ozonator Yes
Metallic structure + S.S. Jets + Cover 32474L4300 Aromatherapy + Chromotherapy Yes
Metallic structure + S.S. Jets + Lumiplus + Cover 32474L4320 Coating Afronatur or Graphite
Graphite Cabinet + S.S. Jets + Cover 32474LK300 Stainless steel jets Yes
Graphite Cabinet + S.S. Jets + ECOSpa + Cover 32474LK305 Metallic structure Yes
Graphite Cab. + S.S. Jets + Audio + Lumiplus + ECOSpa + Cover 32474LK334 CONFIGURATION OPTIONS
Afro Natur Cabinet + S.S. Jets + Cover 32474LM300 EcoSpa thermal insulation Optional
Afro Natur Cabinet + S.S. Jets + ECOSpa + Cover 32474LM305 Lumiplus + Bluetooth Audio
Optional
Afro Natur Cabinet + S.S. Jets + Audio + Lumiplus + ECOSpa + Cover 32474LM334 System
Pacific 50 - Code 41618
TECHNICAL FEATURES
Size 216 x 198 x 90 cm ( 1cm)
Drainage 1
Config. required power 5,155 W / 8,155 W
Blower 400 W
PERLA CAMEO COLOUR (72) Electric heater 3 kW
Headrests 3
Cover Yes
Description Code Ozonator Yes
Chromotherapy LED light Yes
Metallic structure + S.S. Jets + Cover 41618L4300 Stainless steel jets Yes
Metallic structure + S.S. Jets + Lumiplus + Cover 41618L4320 Aromatherapy Yes
Cabinet Graphite + S.S. Jets + Cover 41618LK300 Cabinet Afronatur o Graphite
Cabinet Graphite + S.S. Jets + ECOSpa + Cover 41618LK305 Waterfall 2
Cabinet Graphite + S.S. Jets + Audio + Lumiplus + ECOSpa + Cover 41618LK334 Metallic structure Yes
Cabinet Afro Natur + S.S. Jets + Cover 41618LM300 CONFIGURATION OPTIONS
Cabinet Afro Natur + S.S. Jets + ECOSpa + Cover 41618LM305 Spa cabinet thermal insulation Optional
Cabinet Afro Natur + S.S. Jets + Audio + Lumiplus + ECOSpa + Cover 41618LM334 Lumiplus + Bluetooth Audio System Optional
328
Spas and Saunas
Swimspa Mediterranea - Code 41902
TECHNICAL FEATURES
Size 500 x 230 x 138 cm ( 2 cm)
Positions
4 (2 / 1)
(Seats / Loungers)
Empty/Full spa weight 1,177 Kg / 9,677 Kg
Config. required power 6.210 W / 26.99 A
WHITE COLOUR (44) Jets 25
Jets stream swim 5 x Turbo jets
Waterfall 1
Fountain jets 3
Ozonator Yes
Blower 1200 W
Headrests 1
Standard heater power 3 kW
Internal structure Steel
Cartridge filters 2 x 100 ft2
Description Code Hard Cover Yes
Cabinet grey synthetic Optional
Luxe without Cabinet 41902L4300 Ext. kit Silex filter 500 Optional
Luxe with Coastal Grey Cabinet 41902L1300 Auxiliary panel Yes
Luxe with Ipe Cabinet 41902L5300 Stainless steel jets Yes
Luxe with Coastal Grey Cabinet + Bluetooth audio system 41902L1303 Stainless steel bars Yes
Luxe with Ipe Cabinet + Bluetooth audio system 41902L5303 CONFIGURATION OPTIONS
Luxe without Cabinet for kit with sand filter 41903SE311 Lumiplus + Bluetooth Audio System Optional
This spa is available only in 44 and 46 colours.
SPAS AND
SAUNAS
329
Spas and Saunas
Atlantida 50 - Code 53861
TECHNICAL FEATURES
Size 216 x 198 x 90 cm ( 2cm)
Drainage 1
Empty/Full spa weight 327 kg / 1,227 kg
Blower 400 W
pearl CAMEO colour (72) Headrests 2
Waterfalls 2
Hard Cover Yes
Description Code Ozonator Yes
Metallic structure + S.S. Jets + Cover 53861L4300 Stainless steel jets Yes
Metallic structure + S.S. Jets + Lumiplus + Cover 53861L4320 Coating Afronatur o Graphite
Graphite cabinet + S.S. Jets + Cover 53861LK300 Metallic structure Yes
Graphite cabinet + S.S. Jets + ECOSpa + Cover 53861LK305 Aromatherapy + Chromotherapy Yes
Graphite cabinet + S.S. Jets + Audio + Lumiplus + ECOSpa + Cover 53861LK334 CONFIGURATION OPTIONS
Afronatur cabinet + S.S. Jets + Cover 53861LM300 Lumiplus + Bluetooth Audio
Optional
Afronatur cabinet + S.S. Jets + ECOSpa + Cover 53861LM305 System
Afronatur cabinet + S.S. Jets + Audio + Lumiplus + ECOSpa + Cover 53861LM334 EcoSpa thermal insulation Optional
330
Spas and Saunas
Residential spas in wood cabinet - ESSENTIAL
New
Equilibre - Code 58603
TECHNICAL FEATURES
Size 216 x 148 x 90 cm ( 2cm)
Jets 24
Empty/Full spa weight 229 Kg / 929 Kg
Config. required power Low Amp
(W) 3,460 W / 15.04 A
/ (A) 230V
Massage pump 2,200 W (2 Speed)
Digital control panel Yes
Voltage 230 V/400V III
Headrests 1
STERLING colour (59) Isothermal cover Yes
Ozonator Yes
Stainless steel jets Yes
Coating Graphite
High resistance metal structure Yes
Insulated ABS base Yes
Description Code Chromotherapy Yes
CONFIGURATION OPTIONS
Metallic structure + S.S. Jets + Cover 58603S4300
Whitout cabinet Optional
Graphite Cabinet + S.S. Jets + Cover 58603SK300
Graphite Cabinet + S.S. Jets + ECOSpa + Cover 58603SK305 EcoSpa double thermal insulation Optional
New
Select - Code 58605
TECHNICAL FEATURES
Size 216 x 198 x 90 cm ( 2 cm)
Jets 41
Config. required power
3,610 W / 15.69 A
Low Amp (W) / (A) a 230V
Massage pump (double velocity) 2 x 1,800 W
Standard heater power 3 kW
Headrests 3
Sterling COLOUR (59)
Isothermal cover Yes
SPAS AND
SAUNAS
Digital panel control 1

Ozonator Yes
Coating Graphite
Waterfall 2
Chromotherapy Yes
Description Code High resistance metal structure Yes
Insulated ABS base Yes
Metallic structure + S.S. Jets + Cover 58605S4300 CONFIGURATION OPTIONS
Graphite Cabinet + S.S. Jets + Cover 58605SK300 Whitout cabinet Optional
Graphite Cabinet + S.S. Jets + ECOSpa + Cover 58605SK305 EcoSpa double thermal insulation Optional
331
Spas and Saunas
Residential spas in wood cabinet - ESSENTIAL
New
Emotion - Code 58604
TECHNICAL FEATURES
Size 216 x 198 x 90 cm ( 2cm)
Jets + nozzles 28
Config. required power Low Amp
3,460 W / 15.04 A
(W) / (A) a 230V
Massage pump 2.2 kW (2 speed)
STERLING colour (59) Voltage 230V o 400V III
Headrests 2
Digital control panel 1
Isothermal cover Yes
Ozonator Yes
Coating Graphite
High resistance metal structure Yes
Description Code Insulated ABS base Yes
Chromotherapy Yes
Metallic structure + S.S. Jets + Cover 58604S4300 CONFIGURATION OPTIONS
Graphite cabinet + S.S. Jets + Cover 58604SK300 Whitout cabinet Optional
Graphite cabinet + S.S. Jets + ECOSpa + Cover 58604SK305 EcoSpa double thermal insulation Optional
Corner - Code 43930
TECHNICAL FEATURES
Size 200 X 166 X 71 ( 1 cm)
Drainage 1
Positions (Seats / Loungers) 2 (1/1)
Empty/Full spa weight 197 / 557 kg
Massage pump 1.800 W
PeArl Cameo COLOUR (72) Blower 400 W
Voltage 230 V
Headrests 2
Hard Cover Yes
Ozonator Yes
Aromatherapy Yes
Description Code
Jet nozzle Colour S.S.
Coating Synthetic Grey or Ipe
Coastal Grey Cabinet 43930S1300 Metallic structure Yes
Ipe Cabinet 43930S5300 CONFIGURATION OPTIONS
Without Cabinet 43930S4300 Spa cabinet thermal insulation Optional
332
Spas and Saunas
In-ground residential spas
Thalassa - Code 40768
TECHNICAL FEATURES
Size 216 x 198 ( 2 cm)
Drainage 1
Electronic control panel Yes
Empty/Full spa weight 251 Kg / 1.231 Kg
Headrests 3
Hard Cover Optional
Jet nozzle Stainless Steel
WHITE COLOUR (44) Waterfall 1
Metallic structure Yes
This spa must be acquired with the Digital Compact 41993.
Description Code
Light + Electronic control panel 40768SE310

Light + Electronic control panel + Hard Cover 40768SE311
* The spa cover and the balance tank are sold separatedly.
Please, consult "Complements for spas" section.
Baltic 40 - Code 54438
TECHNICAL FEATURES
Size 216 x 148 ( 2 cm)
Drainage 1
Electronic control panel Yes
Headrests 1
Hard Cover Optional
Aromatherapy + Chromotherapy Yes
Waterfall 2
PeArl Cameo COLOUR (72) This spa must be acquired with the Digital Compact 41993.
WHITE COLOUR (44)
OCEAN 40
SPAS AND
SAUNAS
Description Code
Standard + Light + Electronic control panel 54438SE310

Standard + Light + Electronic control panel +
54438SE311
Hard Cover
333
Spas and Saunas
In-ground residential spas
Ronda 30 - Code 49859
TECHNICAL FEATURES
Size 205 ( 2 cm)
Desage 1
SPA SUNDOWN. Electronic control panel Yes
74
Empty/Full spa weight 132 kg - 812 kg
900 Chromotherapy LED light Yes
827

Hard Cover Optional
PeArl Cameo COLOUR (72)
El numero y disposicion de
los jet puede variar segn versiones. This spa must be acquired with the Digital Compact 41993.
Number and distribution of jets
can change depending of the version.
Desague exterior
External drain.
Description Code
El diseo del mueble puede

puede variar segn versiones.
The cabinet design can change Standard + Light + Electronic control panel + Hard cover 49859SE311
1687
2052
depending of the version.
Fully fitted with skimmer, drain, hoses, nozzles, blowers, control buttons and Venturi.
With adjustable bracket for easy installation.
Acceso a conexiones cuadro electrico.

Electrical board connections acces.
Inca - Code 04005 00

Change No.
Cambio Nm.
02/07/10
Date
Fecha
Name
J.Jorba
Nombre
Modification
Modificacin
Creacion plano.
Remarks Observaciones
Odissea privat.
Date Fecha Name Nombre Part Name Nombre Part Number Nmero de pieza Rev No.
Drawn
Dibujado 02/07/10 J.Jorba
Checked
Verificado
I.Nicolas
Dimensions Detail. 52163 00
Scale Escala General Tolerance Material Size Tamao Surface Coating Color RAL
A3
Tolerancias Generales Acabado Superficial
1:50
DIMENSIONS IN MM. General tolerancies 10 mm. TECHNICAL FEATURES
DIN 7168 ISO 2768g
Assembled in spa number
DIN-
Drawing type
Tipo de plano
Weight Peso Surface
Hardness
First Angle
Montado en nmero de spa (g) Projection
WE RESERVE THE RIGHT TO CHANGE ALL OR PART OF THIS ARTICLE FEATURES
Size Producto
Shore A
196 x 196 ( 2 cm)
Property of IBERSPA S.L. Avda. Pl d'Urgell 2-8 25200 Cervera, Spain. Don't use without permission. Keep this information confidential and use it solely for the permitted purpose.
Sumidero 1
Pneumatic switches 2
Light Yes
WHITE COLOUR (44)
Description Code

Standard + Light + + Electronic control panel + Hard cover 04005SE311
This spa must be acquired with the Digital Compact 41993.
Fully fitted with skimmer, drain, hoses, nozzles, blowers, control buttons and Venturi. With
adjustable bracket for easy installation.
334
Spas and Saunas
In-ground overflow commercial spas
Casiopea - Code 04007
TECHNICAL FEATURES
Size 225 x 225 x 94/97 ( 2 cm)
Jets + nozzles 4+7
Packaging volume 6.38 m3
Main drains 2
Chromotherapy LED Light Yes
Piezoelectric switches 2
BLUE MARBLE COLOUR (46) Metallic structure Yes
Description Code
Standard + Light 04007SE001

Standard + Light + Cover 04007SE006
Supplied with grating, drain, nozzles, blower & filter nozzles. Balance tank not
included
Formentera - Code 16413
TECHNICAL FEATURES
Size 217.5 x 199 x 120/123 ( 2 cm)
Main drains 5
Chromotherapy LED Light Yes
BLUE GRANITE COLOUR (56) Piezoelectric switches 2
Description Code

SPAS AND
SAUNAS
included
335
Spas and Saunas
Venecia - Code 05134
TECHNICAL FEATURES
Size 228 x 228 ( 2 cm)
Main drains 2
Light Yes
NAVY MARBLE COLOUR (52)
Chromotherapy LED Light Optional
Description Code

included
Coliseum - Code 20141
TECHNICAL FEATURES
Size 296.5 x 296.5 x 109/112 ( 2 cm)
Empty/Full spa weight 224 Kg - 2,168 Kg
Main drains 5
Light Yes
NAVY MARBLE COLOUR (52) Piezoelectric switches 2
Description Code

included
336
Spas and Saunas
Olympia - Code 26440
TECHNICAL FEATURES
Size 379 x 248 x 95/98 ( 2 cm)
Jets 16 + 20
GENERAL DIMENSIONS DRAWING: SPA WELLMAX 43638SP315
Main drains 7
Light Yes
50 10
MARBLE BLUE COLOUR (46)

1510
935 20
50 10
1510
This spa is only available in colours 44 and 46.
935 20
Min 30 Chromotherapy LED Light Optional
Max 90
Min 30
Max 90
255
255
Description Code

2810 20
335
2810 20
335
included
4600 20 4600 20
Odisea 20 - Code 45709
TECHNICAL FEATURES
Size 230 x 107 / 110 (2cm)
Water capacity
45709 SPA ODISEA 20 1.120 l
54 10

Main drains 3
Light Yes
965 20
Hmax 1025
Hmin 995
1065

WHITE COLOUR (44)
1780
Description Code
0
2
00
23
Standard + Light 45709SP001
SPAS AND
45709SP006
SAUNAS
Standard + Light + Cover
included
CONNECTIONS ACCESS
ACCESO CONEXIONES
337
Spas and Saunas
Wellmax - Code 43638
TECHNICAL FEATURES
Size 460 x 281 x 114/117 (2 cm)
Water capacity 2,940 l
Empty/Full spa weight 553 kg / 3,493 kg
Positions
7 (5 / 2)
(Seats / Loungers)
Main drains 7
Light High intensity Led colours
Jet nozzle Colours S.S.
Headrests 2
S.S. handrails 4
Available Colours: White / Marble blue
WHITE COLOUR (44)
Description Code
Spa Wellmax S.S. Jet + High intensity Led colours included
+ S.S. handrails
43638SP315
50 10
1510
935 20
Min 30
Max 90
255
2810 20
335
4600 20
338
Spas and Saunas
Tokyo 70 - Code 53990
TECHNICAL FEATURES
Size 340 x 240
Main drains 1
Water capacity 2,200 l
Empty/Full spa weight 373 / 2,573 kg
Headrests 2
Hard Cover Optional
Waterfall Optional
LED light 4
Jet nozzle Colours S.S.
WHITE COLOUR (44)
TOKYO 70
Available Colours: White / Marble blue

2400
3400
Description Code
Tokyo 70 + Light 53990SE315

Tokyo 70 + Light + Hard Cover 53990SE316 Supplied with grating, drain, nozzles, blower & filter nozzles. Balance tank not
Tokyo 70 Plus + Light + Waterfall 53993SE315 included.
Tokyo 70 Plus + Light + Waterfall + Hard Cover 53993SE316
SPAS AND
SAUNAS
339
Spas and Saunas
Mirage 40 - Code 44630
TECHNICAL FEATURES
Size 250 x 101/104 (2 cm)
Jets + nozzles 26+12
Water capacity 1.410 l
Empty/Full spa weight 353 / 1.763 kg
Positions
6 (6/0)
(Seats / Loungers)
Packaging volume 14 m3
Main drains 5
Jet nozzle Colours White
Available colours:
Description Code
Spa Mirage 40 + Chromotherapy 44630SP015

Spa Mirage 40 + Chromotherapy + Cover 44630SP016 G05 G45 G20
included
G50 G35 G15
Lake 40 - Code 56537
TECHNICAL FEATURES
Size 379 x 249 (1 cm)
Jets + nozzles 16/20
Water capacity 2.490 l
Empty/Full spa weight 373 / 2,863 kg
Volume of packaging 19.65 m3
Main drains 7
Jet nozzle Colours White
Isothermal cover option
Available colours:
Description Code
Spa Lake 40 + Chromotherapy 56537SP015

Spa Lake 40 + Chromotherapy + Cover 56537SP016
* The spa cover and the balance tank are sold separatedly. G05 G45 G20 G50 G35 G15
340
Spas and Saunas
Residential compact unit
Compact kit for Thalassa, Baltic, Inca and Ronda 30
Ozone Digital oper- Compact unit Packaging Maximum

Code Massage pump
generator ating panel weight volume Spa Volume
41993CE000
60 kg 2.05 m3 1000 l 1.8 kW
41993CE001
Filter Filtration Electric Voltage Total power Lenght x Width x Height

Code Blower
(mm) pump heater requirements
0.6 kW 115 x 75 x 105
41993 500 0.90 kW 2 kW 230 V 3.53 kW*
7000 l/h mm
* Consumption in Low Amp. a 230 V.
Compact kit for Swimspa Mediterranea
Ozone Digital oper- Chromotherapy Compact unit Packaging Maximum

Code Massage pump
generator ating panel weight volume Spa Volume
41849CE009 70 kg 2.05 m3 8500 l 2 x 2.5 kW
Filter Electric Total power

Code Filtration pump Blower Voltage Lenght x Width x Height
(mm) heater requirements
0.6 kW
41849 500 0.90 kW 3 kW 230 V 6.51 kW* 114 x 100 x 112 mm
7000 l/h
* Consumption in Low Amp. a 230 V.
SPAS AND
SAUNAS
341
Spas and Saunas
Compact filtration for spas
Compact filtration unit for commercial spas
16412 04015
Preassembled unit for filtration, heating and massage.

All kids include the electronic control box controlled by piezoelectric press buttons.
04015CE000
04015CE001
04015CE002
04015CE004
05135CE000
05135CE001
05135CE002
05135CE004
16412CE000
16412CE001
16412CE002
16412CE004
43639CE001
43639CE002
43639CE004
Casiopea, Odisea 20, Casiopea, Odisea 20, Formentera, Coliseum, Wellmax,
Spa Model
Venecia Venecia Olympia, Mirage 40 Tokyo 70
Compact unit weight
109 kg 140 kg 104 kg 150 kg
(with packaging)
Filter weight
Incluido 53 kg 53 kg 53 kg
(with packaging)
Compact kit
0.86 m3 2.08 m3 0.86 m3 1.50 m3
Packaging volume
Filter
- 0.83 m3 0.83 m3 0.83 m3
Packaging volume
Filter 500 mm 650 mm 650 mm 650 mm
Filtration pump 0.60 kW 0.82 kW 0.82 kW 0.82 kW
Filtr. pump flow rate 7.000 l/h 11.000 l/h 11.000 l/h 11.000 l/h
2 x 1.81 kW +
Massage pump 1.40 kW 1.40 kW 2 x 1.81 kW
1 x 2.70 kW
Blower 1.3 kW 1.3 kW 1.3 kW 1.3 kW
Electric heater 6 kW - 6 kW - 6 kW - 6 kW -
Voltage 400 AC III + N 400 AC III + N 400 AC III + N 400 AC III + N
Total power 9.362 W 3.350 W 9.582 W 3.570W 11.802 W 5.790 W 14.485 W 8.473 W
requirements (18.1 A) (5.6 A) (19.2 A) (6 A) (23 A) (9.7 A) (27.5 A) (14.2 A)
Kit dimensions without
packaging Lenght x Width 1160 x 1000 x 1200 mm 1160 x 1000 x 1200 mm 1160 x 1000 x 1200 mm 1160 x 1000 x 1200 mm
x Height
Ozone generator
Autom. dosifier + pH and

chlorine control
Water-water heat

exchanger 20 kW
342
Spas and Saunas
Complements for spas
Covers for spas

Spa THALASSA Cover 17139 1 17 0.40

Spa BALTIC 40 / OCEAN 40 Cover 42345 1 16 0.36
Spa RONDA 30 Cover 51288 1 15 0.27
Spa INCA Cover 23193 1 17 0.40
Spa ODISEA 20 / Infinity Cover 45721 1 20 0.25
Spa CASIOPEA Cover 23195 1 15 0.25
Canvas cover for the Wellmax spa Spa FORMENTERA Cover 28297 1 17 0.58
Spa VENECIA Cover 23198 1 16 0.32
Spa COLISEUM Cover 28298 1 18 0.86
Spa OLYMPIA Cover 43817 1 15 0.44
Spa MIRAGE Cover 41892 1 15 0.44
Spa WELLMAX Cover 43729 1 15 0.35
Spa TOKYO Cover 54184 1 - -
Cover Stand
Metal Stand for simple handling of the cover
28462 1 10 0.118
Spa access steps

Synthetic wood staircase in coastal grey 42002CL01 1 15 0.09

IPE wood 42002CL05 1 15 0.09
Synthetic wood staircase in Afronatur 42002CL0M 1 15 0.09
42002CL01
New Synthetic wood staircase in Graphite 42002CL0K 1 15 0.09
Basic synthetic wood staircase in coastal grey 60194 1 5 0.07
SPAS AND
SAUNAS
42002CL05
42002CL0M 42002CL0K 60194
343
Spas and Saunas
Complements for spas
New
Spa parasol in Cameo with LED

Spa parasol in Cameo with LED 60220 2 15 2
New
Portable spa handrail holder

Portable spa handrail holder 60226 2 8 0.95
New
Spa filter cartridge cleaner

Spa filter cartridge cleaner 60197 1 2 0.04
Polyester balance tank

Used for collecting water volume displaced in overflow channel of commercial spas.
1000 litres capacity (162x122x83 cm) 11372 1 10.0 1.75

2000 litres capacity (204x160x75 cm) 27865 1 15.0 3.81
PE balance tank
1000 litres capacity. Used for collecting water volume displaced in overflow channel of commercial spas.
158x92x95 cm 17144 1 10.0 1.75
Differents compensations vessels availability:
Code Balance tank Spa model
11372 1.000 litres capacity, polyester Casiopea, Formentera, Venecia, Coliseum, Odisea 20,
17144 1.000 litres capacity, PE Mirage 40
Olympia, Wellmax, Casiopea, Formentera, Venecia,

27865 2.000 litres capacity, polyester
Coliseum, Odisea 20, Mirage 40
344
Spas and Saunas
Accessories
21/2 adjustable jet

Regulates proportion of air/water outlet. 50 mm diameter water inlet and 32 mm diameter air inlet. Flow:
2.2 m3/hour. Pressure of 0.8 atm.
32641 12 7.625 0.028
2 threaded jet
50 mm diameter water inlet and 32 mm diameter air inlet. Flow 2.2 m3/hour. Pressure of 0.8 atm.
33586 12 7.625 0.028
Mini Jet spa for acrylic assembly

Designed to be mounted in acrylic spas to attach to pipes with a 20 and 10 mm inside diameter. The body is
included.
40804 25 3.30 0.028
2 drain for spas

With elbow for glueing to 50 mm pipe.
04042 15 4.8 0.028
Adjustable air inlet

1 for air regulation. Controls air to Venturi system.
04045 25 6.0 0.028

SPAS AND
SAUNAS
Adjustable silent air inlet

Silent venturi for jet air flow control. Air intake is through embedded part. Attaches to air distributor code
33937.
33938 25 8.5 0.028
345
Spas and Saunas
Accessories
5 outlet air distributor for venturi

5 outlet manifold for gluing to venturi with code 33938. Outlets for clamping a flexible hosepipe of 10 mm
inner diameter.
33937 25 8.5 0.028
6 outlet air distributor for venturi

6 outlet air distributor to attach to pipes with a 10 mm inside diameter and glue to 15 mm pipes. 6 water
outlet manifold.
33936 25 8.5 0.028
10 outlet air distributor

10 outlet air distributor to attach to pipes with a 10 mm inside diameter and glue to 50 mm pipes. 10 water
outlet manifold.
35346 25 8.5 0.028
4 water outlet manifold

Manifold for gluing to 50 mm pipe, 4 outlets for clamping a hosepipe of 20 mm inner diameter.
33934 25 8.5 0.028
8 water outlet manifold

Manifold for glueing to 50 mm pipe, 8 outlets for clamping a hosepipe 20 mm inner diameter.
33935 25 8.5 0.028
Threaded blower nozzle

For air distribution into the SPA from of the blowers. Flow rate 5.4 to 7.5 m3/h.
White plastic front panel 27602 80 1.6 0.03

Stainless steel front panel 43440 80 1.6 0.03
346
Spas and Saunas
Accessories
Blower nozzle for glueing

For air distribution into the SPA by means of the blowers. Flow rate 5.4 to 7.5 m3/h.

Blower nozzle Lateral outlet 3/8"

For distribution into the SPA by means of the blowers. Flow rate 5.4 to 7.5 m3/h.

2" return unit

For return line and massage.
04034 25 5.0 0.028
Adjustable air impulsion inlet

Adjustable air impulsion inlet. For air distribution by means of the blowers. Maximum flow rate 18 m3/h.
49818 12 4.24 0.021

Pneumatic pressbutton
09667 04047
To operate air blowers, jets and massage jets.
For maximum 15 m 04047 20 0.5 0.028
04048 For maximum 7 m single 04048 40 1.6 0.028
For maximum 7 m single, thread 09667 20 0.5 0.028
SPAS AND
SAUNAS
Plastic tube
For pneumatic signal from pressbutton to switch. Inner 3.5 mm.
04054 50 3.33 0.006
347
Spas and Saunas
Accessories
Rotating jet
Flow rate 2 to 2.5 m3/h.
20297 25 3.33 0.028
Twin rotating jet

Flow rate 2 to 2.5 m3/h.
20296 25 3.83 0.028
Rotating jet housing

20299 15 3.33 0.028
Movable tube jet nozzle, in substitution of a fixed one

Compatible with code 20295 and 20299. Flow rate 2 to 2.5 m3/h.

20298 1 0.8 0.001
21/2 wall conduit for rotating jet

Made up of: The jet body, 20 cm wall conduit, niche, threaded filting, front body. Jet not included.
Flow rate 5m3/h 1 bar.
20295 4 4 0.018
348
Spas and Saunas
Chrome accessories suitable Accessories FOR MINISPAS

only for baths that use
no chemical treatment
11/2" Drain
With elbow to connect to 50mm pipe
Chrome-plated bronze front panel 04104 3 7.5 0.028
Air controller
3/4", controls air massage to Venturi system for jet function

Pneumatic switch
For the starting and stopping of massage and hydromassage functions.

Blower Inlet
For air distribution in the MINI-SPA by using the air blower. 1/2 thread. Lateral air outlet, adjustable and non-
return system.
11/4 jet with adapter to water return

Jet with adaptor to return water to pipe. Also adaptor to connect to water return and air circulation pipe, solvent
for inner 32 mm. Directional.
Chromed-plated bronze front panel (inlet 04100) 04095 8 12.0 0.028

White plastic front panel (inlet 04103) 04097 12 12.0 0.028
Jet 11/4
With adaptor to connect to return water pipe and Venturi to glue to 32 mm pipe. Directional.
SPAS AND
04092
SAUNAS
Chromed-plated bronze front panel (inlet 04100) 8 10.0 0.028

White plastic front panel (inlet 04103) 04094 24 5.0 0.028
11/4 return inlet

Chromed plated 04100 4 15.0 0.028
White plastic 04103 12 3.5 0.028
349
Spas and Saunas
Electrical components spa / minispa
Programmable digital thermostat

To operate ON/OF contactor.
11288 20 0.5 0.003
Electric press button

230 V 50 Hz.
33387 1 1.5 0.003
Electropneumatic equipment
With two switches. Up to 1.47 kW (2 HP).
04053 2 4.0 0.028
Pneumatic switch
For the starting and stopping of air massage and hydromassage functions.
Pneumatic switch 04050 25 1.0 0.028

Double pneumatic switch 11290 6 0.5 0.028
Pneumatic presostat 11291 12 1.0 0.028
350
Spas and Saunas
Air blowers
Continuous operation lateral turbo blower pump

Air pump designed for spas, baths, hydromassage installations and similar which produces a constant stream
of air bubbles at medium and high air volume levels. It can also be used to stir up the filter bed, for example
in back wash cycles where a low intensity air current is required. The filter casing and impeller are made from
an injected aluminium alloy whilst the motor spindle is manufactured from stainless steel, with the impeller
dynamically balanced and directly adapted to the spindle. The motors, single phase or 3 phase for continuous
use, are made from steel in compliance with CEI 2/3 1988 regulations, and feature IP54 external protec-
tion and class-F insulation. The standard voltages are100-120/200-240V for the monophase range and 200-
240/380-440V for the triphase models, at 50/60Hz. The pumps can be mounted horizontally or vertically.
Moreover, since there is no contact between the mobile parts and the pump static discharges, neither lubrica-
tion nor maintenance is necessary and is also doesnt cause wear on the parts. The turbines have a maximum
working temperature of 40C. Do not use in conjunction with aggressive, inflammable or explosive gases.
Please consult for technical variations.
Max.
Frequency Standard Standard
Model Code Electrical supply (V) Phase Flow (m3/h) Pressure
(Hz) Weight kg Volume m3
(mbar)
Blower 0.4 kW 50 200-240 Y 345-415 3 80 130

33970 10 0.045
Blower 0.5 kW 60 220-275 Y 380-480 3 98 170
Blower 0.85 kW 50 200-240 1 145 160
35387 17 0.045
Blower 0.95 kW 60 200-240 1 175 160
Blower 0.85 kW 50 200-240 Y 345-415 3 145 160
35388 16 0.059
Blower 0.95 kW 60 220-275 Y 380-480 3 175 160
Blower 1.3 kW 50 200-240 1 210 170
31090 23 0.059
Blower 1.5 kW 60 200-240 1 255 140
Blower 1.3 kW 50 200-240 Y 345-415 3 210 170
31091 22 0.059
Blower 1.5 kW 60 220-275 Y 380-480 3 255 140
Blower 1.5 kW 50 200-240 1 210 220
33971 24 0.064
Blower 1.75 kW 60 200-240 1 255 220
Blower 1.6 kW 50 200-240 Y 345-415 3 210 220
31092 23 0.064
Blower 2.1 kW 60 220-275 Y 380-480 3 255 220
Blower 1.6 kW 2V 50 200-240 Y 345-415 3 150 300
35389 25 0.087
Blower 2.06 kW 2V 60 220-275 Y 380-480 3 180 310
Blower 2.2 kW 50 200-240 Y 345-415 3 318 230
31093 30 0.097
Blower 2.55 kW 60 220-275 Y 380-480 3 376 220
Blower 3.0 kW 2V 50 200-240 Y 345-415 3 230 410
31094 40 0.126
Blower 3.45 kW 2V 60 220-275 Y 380-480 3 275 400
Blower 3.0 kW 50 200-240 Y 345-415 3 318 280
31095 36 0.097
Blower 3.45 kW 60 220-275 Y 380-480 3 376 280
Blower 4.3 kW 2V 50 345-415 Y 600-720 3 520 600
31096 54 0.217
Blower 4.8 kW 2V 60 380-480 Y 660-720 3 385 320
Blower 5.5 kW 50 345-415 Y 600-720 3 530 320
31097 63 0.16
Blower 6.3 kW 60 380-480 Y 660-720 3 620 340
Blower 5.5 kW 2V 50 345-415 Y 600-720 3 320 515
33972 66 0.201
Blower 6.3 kW 2V 60 380-480 Y 660-720 3 385 530
Blower 7.5 kW 50 345-415 Y 600-720 3 530 400
31098 66 0.16
Blower 8.6 kW 60 380-480 Y 660-720 3 620 400
Blower 11 kW 2V 50 345-415 Y 600-720 3 520 600
33973 104 0.353
Blower 12.6 kW 2V 60 380-480 Y 660-720 3 620 600
SPAS AND
SAUNAS
Blower 12.5 kW 50 345-415 Y 600-720 3 1050 270

33974 116 0.353
Blower 14.5 kW 60 380-480 Y 660-720 3 1250 260
Intermittent operation air blower, 900 W

0.90 kW Flow 54 m3/h at 1.5 m water head 19289 1 3.5 0.028
351
Spas and Saunas
Air blowers
Massage pump
Body in ABS and 75% fibreglass. 0.37 kW (0.5 HP) motor. Electric protection IP-55 220 V 1~50Hz. 2" male
suction connection. 11/2 male return connection.
TECHNICAL FEATURES Packaging Weight Kg Volume m3
m.h.w. m3/h
04091 1 6.0 0.016
2 16.5
4 14.8
6 12.6
8 10
10 7
Intermittent operation air blower

0.74 kW Flow 65 m3/h at 1 m water head 06862 1 3.5 0.028
1.10 kW Flow 133 m3/h at 1 m water head 06863 1 3.5 0.028
Sauna
Saunas
Sauna cabin assembled from prefabricated modular panel elements made of Finnish spruce. Door with bronze
coloured window set with handle and lock. Benches and head rest made of Abachi. Sauna light with shade of
Abachi. Ventilation and air renovation holes. Heater protection fence. Exterior digital control installed, control-
ling light, temperature, time of operation and delayed start time. Protection IP-34.
Width Length Height Heater N N people

Code Type
Inside dimensions in mm kW Benches Seating Laying
33999 1.5 x 1.5 x 2.1 136 136 203 4.5 2 3 2
34000 2 x 1.5 x 2.1 186 136 203 6 2 4 2
34001 2 x 2 x 2.1 186 186 203 6 3 5 3
34002 2.5 x 2 x 2.1 236 186 203 8 3 6 3
34003 1.5 x 1.5 x 2.1 corner 136 136 203 4.5 2 3 2
34004 2 x 1.5 x 2.1 corner 186 136 203 6 2 4 2
34005 2 x 2 x 2.1 corner 186 186 203 6 3 5 3
34006 2.5 x 2 x 2.1 corner 236 186 203 8 3 6 3
352
Spas and Saunas
Sauna accessories
Sauna accessories
Code Type accessory
34007 Timber door with bronze coloured glass window
34008 Full bronze coloured glass door

Sauna box: thermohygrometer, wooden bucket with ladle, sand timer,
34009
sauna's fragrance one bottle 50 ml
34010 Timber ventilation grille
34011 Timber head rest wood
34065 Fragrance bottles 50 ml: pine, eucalyptus, birch, lemon, spruce, peppermint
34066 Fragance bottles 250 ml: pine, eucalyptus, birch, peppermint
Sauna heater

Power 4.5 kW - Sauna volume 3-6 m3 34012 1 - -
Power 6 kW - Sauna volume 5-9 m3 34013 1 - -
Digital control
Light control, temperature control, operation time control, delayed start time and protection IP-34.
34016 1 - -
SPAS AND
SAUNAS
353
pool heating
Pool heating
356 Air/water heat pumps, for outdoor installation

360 Air/water heat pumps, for indoor installation
361 Air/water heat pumps with axial ventilator,
for indoor installation
for outdoor installation
363 Air/water chillers with centrifugal ventilator,
for indoor installation
365 Heat exchangers
for outdoor installation
369 Heat exchangers
372 Water/water plate heat exchanger
377 Gas heaters for pools and spas
378 Solar collectors
379 Dehumidifiers
POOL HEATING
355
pool heating
Air/water heat pumps, for outdoor installation
AP Heat II
Air/Water heat pump suitable for swimming pools and spas. It will allow you to extend the use of your outdoor
pool in the summer season by taking advantage of the air in the atmosphere.
NEW FEATURES:
Energy Saving. Operation mode COP: COP operation mode (Comprehensive Performance Operatinal) is based
on knowing the energy efficiency of the machine during operation. To get to know the overall performance of the
machine in real time the electronic card and reads the parameters appropriate sensors, performs the necessary
calculations and adjusted to optimal performance at each facility.
Wireless remote control that communicates by radio frequency through which we can have total control as
the product on and off the machine, selecting heating or cooling mode (optional), selection of operating modes
COP or ECO, selection of Pool or SPA heating (optional), change slogan, reading the temperature of the pool
and outdoor temperature, alarm and signal flow.
Alarm history and diagnosis of faults: It gives the team an alarm history and diagnosis of faults to be more
effective in technical assistance and information available computer anywhere.
Domotics. Modbus communication: Remote Control features such as: start-stop, up-down degrees, heat,
cooling, filtration or choose comfort, choose energy savings (from: ECO, COP or none).
Possibility of heating pool or spa: Optional power with the same heat a pool or spa equipment and its control
of three-way valves (not included) and the system debugger.
Air/Water heat pump suitable for swimming pools and spas. It will allow you to extend the use of your outdoor
pool in the summer season by taking advantage of the air in the atmosphere.
Strong and light design in injected ABS+UV resistant to suns radiation. Colour does not degrade.
Long and hight efficency Evaporation Battery (gas-air exchanger) made of copper and aluminium fins, suit-
able for corrosive environments and costal locations.
Axial fan with Engine of direct coupling.
SCROLL compressors with internal protection.
Titanium Condensers made with a PVC casing and TITANIUM G2 coil according to ASTM B 338.99 stand-
ard. Granted against corrosion.
R-407_C full charge.
Nitrogenous, dehydrated and deoxidized copper refrigerating circuit.
High and low pressure switches (AP/BP) with automatic rearmament.
Thermostatic valve expansion with external regulation.
Dehydrating Filter.
Hydraulic circuit with water inlet flow switch made of PVC, good elasticity and high resistance against fis-
sures, imperative for hot and pressured liquid transportation.
Electrical cabinet with high sensibility digital regulation and filtering pump control. Keyboard blocking.
Display protection cover.
Intelligent Heat: This system mantains automatically the set temperature of the swimming pool or spa,
controlling the filtering system.
Phase Monitor: Protects the compressor against losses and phase inversion.
Defrost: Activating the fan, the unit defrosts the evaporator.
New ECO system: In stopping periods, it maintains the installation at a closer temperature to the set tem-
perature to save energy.
Remote control: Total heat pump operational control from anywhere by means of control panels.
OPTIONAL:
Gas defrosting: the unit can work at temperatures lower than 5C, defrosting the evaporator if needed. Only
with the reversible option.
MODELS E A
Size
B100/R100 B150/R150 B200/R200 B250/R250 B300/R300
A 89 89 101 101 101
B 80 80 106 106 106
C 38 38 44 44 44
D 4 4 4 4 4 B
E 69 69 83 83 83 G
D
F 13 13 13 13 13
G 15 15 27 27 27
Note : dimensions in cm.
C F
356
pool heating
AstralPool Heat

AstralPool Heat B100-M 54068 1 - -
AstralPool Heat B150-T 54070 1 - -
New AstralPool Heat B400-T 57218 1 - -
New AstralPool Heat B500-T 57219 1 - -
AstralPool Heat Defrost R100-M 54078 1 - -
AstralPool Heat Defrost R150-T 54080 1 - -
New AstralPool Heat Reversible R400-T 57220 1 - -
New AstralPool Heat Reversible R500-T 57221 1 - -
TECHNICAL FEATURES
BASIC B100-M B150-M B150-T B200-M B200-T B250-M B250-T B300-T B400-T B500-T
CODE 54068 54069 54070 54071 54072 54073 54074 54075 57218 57219
REVERSIBLE R100-M R150-M R150-T R200-M R200-T R250-M R250-T R300-T R400-T R500-T
CODE 54078 54079 54080 54081 54082 54083 54084 54089 57220 57221
VOLTAGE V/Ph/Hz 230/2/50 230/2/50 400/3/50 230/2/50 400/3/50 230/2/50 400/3/50 400/3/50 380/3/50 380/3/50
HEAT EXCHANGER TITANIUM
COMPRESSOR SCROLL
CASING ABS
B100-M B150-M B150-T B200-M B200-T B250-M B250-T B300-T B400-T B500-T
REFRIGERANT 1.2 kg 1.6 kg 1.6 kg 1.88 kg 2.0 kg 2.0 kg 2.0 kg 2.3 kg - -
R-407-C R100-M R150-M R150-T R200-M R200-T R250-M R250-T R300-T R400-T R500-T
1.8 kg 1.9 kg 1.9 kg 2.2 kg 2.2 kg 2.2 kg 2.2 kg 2.7 kg - -
Low water flow alarm 24 - 18 bar / 350 - 260 psi
(bar)
High water flow alarm 0.7 - 2.2 bar / 10 - 32 psi
Optimal water flow 12 18
m3/h
Minimum water flow 6 10
AIR FLOW m3/h 3.500 7.000 10.000
1 mts 67 70 72
SOUND LEVEL dB(A)
3 mts 59 62 65
WATER CONNECTION SIZE mm 50
INPUT POWER kW 2.4 2.7 2.7 3.9 3.9 5.2 5.2 6.2 11.0 12.1
27C T.AIR
OUTPUT POWER kW 11.1 15.1 15.1 20 20 26 26 30 40 50

COP 4.63 5.69 5.69 5.1 5.1 5 5 4.8 3.8 3.9
INPUT POWER kW 2.3 2.6 2.6 3.7 3.7 4.9 4.9 5.3 10.2 11.2
15C T.AIR
OUTPUT POWER kW 8.5 11.6 11.6 15.7 15.7 22 22 26 32 37

COP 3.7 4.46 4.46 4.2 4.2 4.4 4.4 4.9 3.3 3.4
INPUT POWER kW 2.2 2.5 2.5 3.5 3.5 4.8 4.8 5.2 10.0 10.5
5C T.AIR
OUTPUT POWER kW 5.5 7.6 7.6 10.3 10.3 15 15 19 25 30

POOL HEATING
COP 2.5 3.04 3.04 2.5 2.5 3.1 3.1 3.6 2.8 2.9
RECOMMENDED m3 Mx. 35 48 65 89 103 137 171
WATER VOLUME m3 Mn. 11 30 40 53 65 86 108
Modbus is a registered brand of Modbus.
357
pool heating
New
Procalor II
The PROCALOR heat pump is suitable for heating small outdoor swimming pools until 160 m3. Extremely
quiet, it can work at 5C outdoor air temperature with gas R410A. Made in plastic, it has Titanium heat ex-
changer, flow controller, 4-way valve and filter control. It includes a remote control and winter cover.
Procalor BPM400RW 55208 1 - -
Procalor BPT700RW 55211 1 - -
TECHNICAL FEATURES
MODELS BPM400RW BPM600RW BPM700RW BPT700RW BPM800RW BPT800RW BPT900RW

CODE 55208 55209 55210 55211 55212 55213 55214
VOLTAGE V/Ph/Hz 230/2/50 230/2/50 230/2/50 400/3/50 230/2/50 400/3/50 400/3/50
WATER CONDENSER TITANIO
COMPRESSOR ROTATIVO SCROLL
REFRIGERANT (R-407A) Kg 1.25 1.55 2.2 2.2 2.75 2.75 3.1
WATER FLOW m3/h 5 7.5 7.5 7.5 9 9 9
HEAD LOSS kPa 10 12 12 12 12 12 12
VENTILATORS N / RPM 1 / 850
SOUND LEVEL dB(A) 51 58 58 58 58 58 58
CONNECTION mm 50
27C INPUT POWER KW 1.75 2.66 3.57 3.57 4.59 4.59 5.61
T.AIR OUTPUT POWER 9.5 14.5 19.2 19.2 24.3 24.3 28.93
KW
24 C
T WATER COP 5.43 5.45 5.38 5.38 5.29 5.29 5.16
15C INPUT POWER KW 1.7 2.6 3.5 3.5 4.5 4.5 5.5
T.AIR OUTPUT POWER KW 8.5 13.5 17 17 21 21 25
24 C
T WATER COP 5 5.19 4.88 4.88 4.67 4.67 4.55
5C INPUT POWER KW 1.5 2.29 3.08 3.08 3.96 3.96 4.84
T.AIR 5.2 8 10.4 10.4 13 13 15.48
24 C OUTPUT POWER KW
T WATER COP 3.47 3.49 3.38 3.38 3.28 3.28 3.20
RECOMMENDED MAX. m3 29 46 58 58 72 72 85
WATER
VOLUME MN. m3 18 29 36 36 45 45 55
A 310 310 340 340 340 340 340

DIMENSIONS
B 860 860 950 950 950 950 950
(mm)
C 920 920 1300 1300 1300 1300 1300
NET WEIGHT Kg 70 75 97 97 110 110 115

TOTAL WEIGHT Kg 80 85 110 110 120 120 120
Working conditions: Minimum outdoor Temperature 5C. Maximum water Temperature 36C. Maximum pressure water inlet 3.5 bars. Contact with the distributor.
358
pool heating
NEW
2013
Evo
Bomba de heat
Air/Water calorpump
Aire/Agua
Caliente
Heats yoursu pool
piscina
de la forma
in the cheapest
ms econmica.
possible way
Piscinas privadas
Private pools of updetohasta
90 m90
3 m3
Silenciosa
Silent
Carcasa robusta
Robust ABS en ABS
casing
Intercambiador de titanio
Titanium exchanger
Panel de control
Easy-to-use fcilpanel
control de usar
UV
O3 2
POOL HEATING
2 CL NaCl
24C 2 YEARS
Consumo
Daily diario
consumption Para todo
For all tipo
types Easy to Use Garanta
2-year
(piscina
(8m x8m4mxpool)
4m). de
of piscinas
pool andy Panel de control
Digital Control panel
Digital. de 2 aos
guarantee
80%El 80% de su energa
of its power
proviene
comes from
del ambiente.
the environment
tratamientos
treatment
(cloro, bromo,
(chlorine, ozono,
bromine, UV,
ozone, 359
electroqumico, sal).
electrochemical, salt)
pool heating
Air/water heat pumps, for indoor installation
New
Evo
Air/water heat pump to heat your pool in the cheapest possible way. Private pools of up to 90 m3.
Extensive selection of power range options for all types of pool (see technical specifications table).
The most silent on the market.
Titanium exchanger.
Easy-to-use control panel.
Robust ABS casing with white UV protection.
R-407C refrigerant gas (environmentally friendly).
Watertight electrical panel.
Improved quality cabling (hoses, stuffing box, etc.).
Improved quality finishing.
Flow switch.
Easy access to electrical connection.
Forced draft defrosting.
Evo BLPAM200 55215 1 - -
Evo BLPAM400 55216 1 - -
Evo BLPAM600 55217 1 - -
Evo BLPAM700 55218 1 - -
Evo BLPAT700 55219 1 - -
Evo BLPAM800 55220 1 - -
Evo BLPAT800 55221 1 - -
Evo BLPAT900 55222 1 - -
TECHNICAL FEATURES
MODELS BLPAM200 BLPAM400 BLPAM600 BLPAM700 / BLPAT700 BLPAM800 / BLPAT800 BLPAT900
CODE 55215 55216 55217 55218 / 55219 55220 / 55221 55222
POWER kW 4.5 8.5 13.4 17 21 25

VOLTAGE V/Ph/Hz 220/2/50 220/2/50 220/2/50 220/2/50 - 380/3/50 220/2/50 - 380/3/50 380/3/50
MAX. POOL VOLUME m3 14.5 29.0 46.0 58.0 72.0 86.0
MIN. POOL VOLUME m3 9.0 18.0 29.0 36.0 45.0 53.0
SOUND LEVEL dB(A) 47 51 58 58 58 60
27 C INPUT POWER KW 0.87 1.75 2.66 3.57 4.59 5.61
T. AIR / WATER OUTPUT POWER KW 4.70 9.50 14.50 19.20 24.30 29.70
24 C COP 5.40 5.43 5.45 5.38 5.29 5.29
15 C INPUT POWER KW 0.85 1.70 2.60 3.50 4.50 2.50
T. AIR / OUTPUT POWER KW 4.20 8.50 13.50 17.00 21.00 25.00
WATER 24 C COP 4.94 5.00 5.19 4.88 4.67 4.56
5 C INPUT POWER KW 0.75 1.50 2.29 3.08 3.96 4.84
T. AIR / OUTPUT POWER KW 2.60 5.20 8.00 10.40 13.00 18.80
WATER 24 C COP 3.47 3.47 3.49 3.38 3.28 3.88
A 350 380 380 530 530 530
DIMENSIONS
B 720 910 910 1110 1110 1110
(mm)
C 545 685 695 1005 1005 1005
NET WEIGHT Kg 38 70 78 97 110 115
360
pool heating
Air/water heat pumps with axial ventilator, for indoor

installation
Vallarta / Reversible Vallarta

Compact design for installation in a pump room.
Made of galvanized steel, painted and coated, or in non-corrosive magnesium coated aluminium (this option
is supplied under special order).
High performance evaporator (gas-air heat exchanger) made of corrugated copper pipe in the interior and
coated aluminium fins, special for corrosive and sea-side environments.
Centrifugal ventilator with direct transmission.
Sealed scroll compressor with internal protection.
Titanium condensers with PVC shells and G2 titanium coil according to ASTM B 338.99 standard. Guaran-
teed against corrosion.
Filled with refrigerant gas R-407-C wih low ecological impact.
Refrigeration circuit of dehydrated, nitrogenated and deoxidised copper.
Low and High Pressure (LP/HP) mini-pressure switches with automatic reset.
Expansion via thermostatic valve with external balancing unit.
Dehydrating filter.
Hydraulic circuit with flow switch at the water inlet, connections in PVC.
Defrosting by forced ventilation.
There is a reversibility option (reversible pump codes) which allows the unit to defrost the evaporator using
hot gas. These units can also operate as chillers.
Fully fitted control panel with digital high-sensitivity regulation.
F
E
B
A
D
G
I H
Total
Dimensions (mm)
Model Type Reversible Code weight
A B C D E F G H I (Kg)
VALLARTA-7 Lacquered sheet metal No 32499 1200 750 600 650 265 30 299 395 510 295
VALLARTA-7 Magnesium coated No 32503 1200 750 600 650 265 30 299 395 510 295
VALLARTA-25 Lacquered sheet metal No 32502 1650 950 700 - 345 30 315 700 690 415
VALLARTA-25 Magnesium coated No 32506 1650 950 700 - 345 30 315 700 690 415
VALLARTA-7 Lacquered sheet metal Yes 33895 1200 750 600 650 265 30 299 395 510 295
VALLARTA-7 Magnesium coated Yes 33899 1200 750 600 650 265 30 299 395 510 295
POOL HEATING
VALLARTA-25 Lacquered sheet metal Yes 33898 1650 950 700 - 345 30 315 700 690 415
VALLARTA-25 Magnesium coated Yes 33902 1650 950 700 - 345 30 315 700 690 415
We reserve the right to change any features of our items or the content of this document partially or fully, without prior notification.
361
pool heating
Air/water heat pumps with axial ventilator, for outdoor installation
Vallarta / Reversible Vallarta
TECHNICAL FEATURES
MODELS VALLARTA-7 VALLARTA-12 VALLARTA-15 VALLARTA-25

STANDARD COATED STEEL 32499 32500 32501 32502
REVERSIBLE COATED STEEL
33895 33896 33897 33898
STANDARD MAGNESIUM ALUMINIUM 32503 32504 32505 32506
REVERSIBLE MAGNESIUM ALUMINIUM 33899 33900 33901 33902
VOLTAGE V/Ph/Hz 230/2/50 230/2/50 400/3/50 400/3/50
WATER CONDENSER TITANIUM
COMPRESSOR ROTARY SCROLL
REFRIGERANT GAS 1 Kg / R-407C 1.5 kg / R-407C 2 Kg / R-407C 3 Kg / R-407C
FLOW RATE m3/h 6 6 7 8
HEAD LOSS Kpa 10
N 1
VENTILATOR
TYPE CENTRIFUGAL
FLOW RATE m3/h 2000 2000 2500 6000
AVAILABLE PRESSURE m.c.a 15
SOUND LEVEL (db) 1 mts. 60 60 64 70
CONNECTION mm 50
27C INPUT POWER KW 2.133 2.29 2.62 5.24
T. AIR/ OUTPUT POWER KW 9.5 12.3 16.2 28.3
WATER A 10.90 11.70 8.06 11.94
24C COP 4.45 5.3 6.1 5.4
15C INPUT POWER KW 1.88 2.04 2.59 5.19
WATER A 9.80 10.56 7.97 11.81
24C COP 4.73 5.8 5.9 5.1
5C INPUT POWER KW 1.69 1.9 2.33 4.85
WATER A 9.0 9.61 7.75 11.52
24C COP 4.79 5.60 5.9 4.47
25C INPUT POWER KW 1.52 1.87 2.3 4.8
WATER A 8.80 9.61 7.67 11.52
24C COP 4.28 5.13 5.1 3.8
30C INPUT POWER KW 1.5 1.85 2.1 4.6
WATER A 8.7 9.59 7.65 11.50
24C COP 3.93 4.75 5.1 3.8
35C INPUT POWER KW 1.49 1.83 1.9 4.6
WATER A 8.60 9.57 7.63 11.49
24C COP 2.95 4.32 5.05 3.67
POOL MAX. m3 30 41 53 92
VOLUME MIN. m3 19 25 33 57
TOTAL WEIGHT Kg 122 137 157 208

Operating limits and conditions: Minimum outdoor air temperature: 5 C. Maximum water temperature: 36C. Maximum water pressure on entering the machine: 3.5 bar.
362
pool heating
Air/water chillers with centrifugal ventilator, for

indoor installation
Maya
Compact design for installation in a pump room.
Made of galvanized steel, painted and coated, or in non-corrosive magnesium coated aluminium (this option
is supplied on special orders).
High performance evaporator (gas-air heat exchanger) made of copper corrugated pipe on the inside and
coated aluminium fins, special for corrosive and sea-side environments.
Centrifugal ventilator with transmission with belts and pulleys.
Sealed scroll compressor with internal protection.
Titanium condensers with PVC shells and in G2 titanium coil according to ASTM B 338.99 standard. Guar-
anteed against corrosion.
Filled with refrigerant gas R-407-C with low ecological impact.
One or two refrigeration circuits of dehydrated, nitrogenated and deoxidised copper, according to models.
Expansion by thermostatic valve with external balancing unit.
Dehydrating filter.
Hydraulic circuit with flow switch in the water inlet, connections in PVC.
Defrosting by forced ventilation,
Fully fitted control panel with digital high-sensitivity regulation.

Standard Coated Steel
Maya-30 32507 1 - -
Maya-45 32508 1 - -
Maya-51 32509 1 - -
Maya-60 32510 1 - -
Maya-102 32511 1 - -
Magnesiun Aluminium
Maya-30 32512 1 - -
Maya-45 32513 1 - -
Maya-51 32514 1 - -
Maya-60 32515 1 - -
Maya-102 32516 1 - -
Regulator
Ventilator
Evaporator battery
Expansion valve
Water condenser
Compressor Dehydrating filter
POOL HEATING
363
pool heating
AIR/WATER HEAT PUMPS WITH AXIAL VENTILATOR, FOR inDOOR INSTALLATION
Maya
B
C
C
G G
B A
TECHNICAL FEATURES
MODEL MAYA-30 MAYA-45 MAYA-51 MAYA-60 MAYA-102
STANDARD COTAED STEEL 32507 32508 32509 32510 32511
MAGNESIUM ALUMINIUM 32512 32513 32514 32515 32516
VOLTAGE V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50
COMPRESSOR SCROLL
REFRIGERANT GAS 4 Kg / R-407C 6 kg / R-407C 8 Kg / R-407C 10 Kg / R-407C 17 Kg / R-407C
FLOW RATE m3/h 10 15 20 34 48
HEAD LOSS Kpa 10 10 12 12 14
N 2
VENTILATOR
TYPE CENTRIFUGAL
FLOW m3/h 8,000 12,000 12,000 15,000 22,000
AVAILABLE PRESSURE m.c.a. 15
SOUND LEVEL (db) 1 mts. 70 73 73 69 75
CONNECTION mm 63 75
27C INPUT POWER KW 8.053 10.19 12.86 15.33 26.82
T. AIR OUTPUT POWER KW 36.402 42.12 56.69 63.69 113.37
WATER A 15.80 20.26 23.65 29.40 49.20
24C COP 4.52 4.13 4.41 4.15 4.23
15C INPUT POWER KW 6.667 8.58 10.72 12.87 22.54
WATER A 14.20 18.41 21.00 25.10 44.00
24C COP 5.39 4.85 5.21 4.89 4.95
5C INPUT POWER KW 6.121 7.97 9.81 11.85 20.72
WATER A 13.60 17.78 19.90 25.20 41.80
24C COP 5.16 4.60 4.98 4.67 4.71
MAX. m3 120 141 189 213 381
POOL VOLUME
MIN. m3 75 88 118 133 238
A 1,000 1,000 1,000 1,000 1,000

DIMENSIONS
B 1,700 1,700 1,700 2,200 2,200
(mm)
C 2,000 2,000 2,000 2,000 2,150
NET WEIGHT Kg 450 475 580 650 1.150
TOTAL WEIGHT Kg 500 525 640 720 1260
Operating limits and conditions: Minimum outdoor air temperature: 5 C. Maximum water temperature: 36C. Maximum water pressure on entering the machine: 3.5 bar.
364
pool heating
Heat exchangers
Optima
Robust, lightweight ABS casing made from magnesium coated aluminium.
Two operating versions
Standard: Operating as a heat pump with reverse cycle defrosting.
REVERSIBLE: Providing heat or cold to maintain the temperature of the pool with reverse cycle defrosting
4-way valve.
High performance evaporator battery in an inner corrugated copper tube with lacquered aluminium fins,
especially for corrosive environments.
Axial ventilator with direct link and low sound level.
Scroll compressor.
Titanium condensers made of PVC casing and TITANIUM G2 coil. Guaranteed against corrosion. It includes
drainage for care in the winter.
R-407C refrigerant gas (environmentally friendly)
A refrigerant circuit with nitrogenous copper, dehydrated and deoxidised.
Expansion by thermostat valve with external equalizer.
High and low pressure switches.
Flow switch to control water flow.
Purification control with voltage free contact and timer.
Electrical protection: automatic fuse switch to manage power supply in monophase machines, and auto-
matic fuse switch to manage power supply in three-phase machines.
Easy-to-use control panel, with current temperature display and set point, and alarm notifications.
Standard
Optima-7 45685 1 - -
Optima-12 45686 1 - -
Optima-15 45687 1 - -
Optima-23 45688 1 - -
Optima-25 45689 1 - -
Optima-30 45690 1 - -
Optima-45 45691 1 - -
Optima-50 45692 1 - -
Optima-60 45693 1 - -
Reversible
Optima-7 45694 1 - -
Optima-12 45695 1 - -
Optima-15 45696 1 - -
Optima-23 45697 1 - -
Optima-25 45698 1 - -
Optima-30 45699 1 - -
Optima-45 45700 1 - -
Optima-50 45701 1 - -
Optima-60 45702 1 - -
ELECTRICAL DATA
MODELS OPT-7 OPT-12 OPT-15 OPT-20 OPT-25 OPT-30 OPT-45 OPT-50 OPT-60
ENERGY CONSUMPTION AMP 14.1 15.1 7.3 20.8 8.8 26.2 10.5 12 19.7 22.4 25.26 34
THERMAL MAGNETIC 20 20 10 25 16 32 16 16 25 25 32 40
VOLTAGE V 230 ll 230 ll 400 lll 230 ll 400 lll 230 ll 400 lll 400 lll 400 lll 400 lll 400 lll 400 lll
SECTION (mm2) 4 4 4 6 4 10 4 4 4 4 4 6
N OF WIRES 3 3 5 3 5 3 5 5 5 5 5 5
For sections, consult an authorised installation professional.
POOL HEATING
365
pool heating
Air/water heat pumps with axial ventilator, for outdoor installation
Optima
TECHNICAL FEATURES
MODELS OPTIMA-7 OPTIMA-12 OPTIMA-15 OPTIMA-23 OPTIMA-25 OPTIMA-30 OPTIMA-45 OPTIMA-50 OPTIMA-60
STANDARD 45685 45686 45687 45688 45689 45690 45691 45692 45693
CODE
REVERSIBLE 45694 45695 45696 45697 45698 45699 45700 45701 45702
230/2/50 230/2/50 230/2/50

VOLTAGE V/Ph/Hz 230/2/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50
400/3/50 400/3/50 400/3/50
COMPRESSOR SCROLL
REFRIGERANT GAS R-407C
HIGH PRESSURE ALARM 24-18 bar / 350- 260 psi
LOW PRESSURE ALARM 0.7-2.2 bar / 10- 32 psi
FLOW RATE STAND. 12 12 12 12 12 16 16 16 32
(m3/h) REVERS. 12 12 16 24 24 24 48 48 48
CONNECTION STAND. 50 63 75
(mm) REVERS. 50 63 90
HEAD LOSS m.c.a. 1.2 1.4
N 1 1 1 1 1 2 2 2 2
VENTILATORS
m3/h 2500 3500 3500 7000 7000 7000 14000 14000 14000
SOUND LEVEL 1 m 67 67 67 70 70 70 70 70 70
(db) 3 m 59 59 59 62 62 62 62 62 62
27C INPUT POWER KW 1.8 2.3 3 4.8 5.4 6.5 9.5 10.7 12.8
T AIR OUTPUT POWER KW
T WATER 7.8 12.9 16.2 25.1 27.8 34.4 48.3 54.7 64.2
24C COP 4.3 5.6 5.4 5.45 5.14 5.29 5.08 5.11 5.02
15C INPUT POWER KW 1.7 2.2 2.9 4.6 5.2 6.2 9.2 10.4 12.4
T WATER 7 12 15 23 25 30 45 51 60
24C COP 4.11 5.45 5.1 5 4.8 4.8 5 5 4.8
5C INPUT POWER KW 1.6 2.1 2.8 4.4 5 5.9 8.9 10 11.9
T WATER 6 10 13.6 18.5 20.1 26.2 39.8 44.2 54.1
24C COP 3.75 4.76 4.86 4.20 4.02 4.4 4.47 4.42 4.54
35C INPUT POWER KW 2.1 2.6 3.3 5.1 5.8 7 10.1 11.3 13.4
T WATER 5.4 7.9 9.7 13.5 17.3 20.7 28.1 35.8 42.7
24C COP 2.57 3.03 2.94 2.65 2.98 2.96 2.78 3.17 3.19
30C INPUT POWER KW 2.0 2.5 3.2 5 5.6 6.8 9.8 11.1 13.2
T WATER 5.9 8.5 10.2 14.1 17.9 21.3 28.7 36.3 43.3
24C COP 2.95 3.4 3.19 2.82 3.2 3.13 2.93 3.27 3.28
25C INPUT POWER KW 1.8 2.3 3 4.8 5.4 6.5 9.5 10.7 12.8
T WATER 6.5 9.6 11.8 14.7 18.5 22 29.4 37 44
24C COP 3.6 4.17 3.9 3.06 3.42 3.38 3.09 3.45 3.43
MX. 24 41 51 79 86 103 154 172 206
RECOM. POOL VOLUME (m3)
MN. 15 25 39 49 53 64 96 107 129
DIMENSIONS
C A (mm) 800 800 1,000 1,000 1,000 1,000 2,100 2,100 2,100
A B (mm) 800 800 1,000 1,000 1,000 1,000 1,000 1,000 1,000
B C (mm) 700 700 1,000 1,000 1,000 1,000 1,000 1,000 1,000
NET WEIGHT Kg 95 103 103 118 118 150 160 165 180
TOTAL WEIGHT Kg 105 113 113 128 128 165 175 180 205
Operating limits and conditions: Minimum outdoor air temperature: 5 C. Maximum water temperature: 40C.
Maximum water pressure on entering the machine: 3.5 bar
366
pool heating
AIR/WATER HEAT PUMPS WITH AXIAL VENTILATOR, FOR OUTDOOR

INSTALLATION
New
Proheat
Robust, lightweight ABS casing made from magnesium coated aluminium on an aluminium frame.
High performance evaporator battery in an inner corrugated copper tube with lacquered aluminium fins,
especially for corrosive environments.
Axial ventilator. In PROHEAT PLUS models, it has a frequency inverter to control evaporation.
Scroll compressor. In PROHEAT PLUS models, it controls the power supply to control evaporation.
G2 Titanium water condensers. Guaranteed against corrosion.
R-407-C refrigerant gas in standard models and R-410-A in PROHEAT PLUS models.
Expansion by thermostat valve with external equalizer.
Flow switch to control condensation.
For PROHEAT models, standard reverse cycle defrosting with a 4-way valve.
PROHEAT PLUS models have hot gas defrosting to control evaporation at low temperatures.
Purification system control.
Electrical protection for handling and strength.
Easy-to-use control panel with current temperature display and set point, and alarm notifications. Commu-
nication protocols are available.
Standard
Proheat 30 57019 1 - -
Proheat 45 57020 1 - -
Proheat 51 57021 1 - -
Proheat 60 57022 1 - -
Proheat 90 57023 1 - -
Proheat 102 57024 1 - -
Proheat 130 57025 1 - -
Plus
Proheat 30 57026 1 - -
Proheat 45 57027 1 - -
Proheat 51 57028 1 - -
Proheat 60 57029 1 - -
Proheat 90 57030 1 - -
Proheat 102 57031 1 - -
Proheat 130 57032 1 - -
POOL HEATING
367
pool heating
AIR/WATER HEAT PUMPS WITH AXIAL VENTILATOR, FOR OUTDOOR INSTALLATION
Proheat
TECHNICAL FEATURES
MODELS PRPHEAT 30 PROHEAT 45 PROHEAT 51 PROHEAT 60 PROHEAT 90 PROHEAT 102 PROOHEAT 130
STANDARD 57019 57020 57021 57022 57023 57024 57025
CODE
REVERSIBLE 57026 57027 57028 57029 57030 57031 57032
VOLTAGE V/Ph/Hz 400 / 300 / 50

COMPRESSOR SCROLL
STANDARD R 407 - C 4 6 8 10 15 17 20
REFRIGERANT
PLUS R 410 - C 4.5 6.2 8.6 10.8 16 18.2
WATER FLOW m3/h 10 15 20 34 44 48 75
HEAD LOSS Kps 10 10 12 12 14 14 14
VENTILATORS AXIAL
SOUND LEVEL at 1 m dB 79 81 81 79 79 75 81
0 CONNECTION mm 63 63 63 63 75 75 90
INPUT POWER KW 8.23 10.01 12.67 14.89 18.50 25.07 30.69

27C T AIR
24C T WATER OUTPUT POWER KW 37.70 43.60 58.70 65.90 87.90 117.20 136.80
COP 4.58 4.36 4.63 4.43 4.75 4.67 4.46
INPUT POWER KW 6.85 8.39 10.53 12.43 16.50 20.79 25.77
15C T AIR OUTPUT POWER KW
24C T WATER 33.90 39.70 53.80 60.90 78.80 108.00 127.00
COP 4.94 4.73 5.10 4.89 4.78 5.10 4.92
INPUT POWER KW 6.30 7.78 9.62 11.41 14.70 18.97 23.72
5C T AIR
COP 4.75 4.47 4.88 4.84 4.71 5.01 4.90
POWER LOWER THAN 5C ONLY FOR PROHEAT PLUS MODELS
INPUT POWER KW 6.51 7.35 10.64 12.83 16.55 22.44 27.92
0C T AIR OUTPUT POWER KW
24C T WATER 22.93 26.83 36.40 42.33 53.80 74.05 89.35
COP 3.52 6.65 3.42 3.30 3.25 3.30 3.20
-5C T AIR
INPUT POWER KW 4.56 5.24 7.62 9.20 12.19 16.31 20.03
COP 3.50 3.60 3.40 3.20 3.15 3.25 3.12
DIMENSIONS
C A (mm) 1.800 1.800 1.800 1.800 2.350 2.350 2.350
A B (mm) 1.208 1.208 1.208 1.208 1.208 1.208 1.208
B C (mm) 1.880 1.880 1.880 1.880 1.880 1.880 1.880
NET WEIGHT Kg 220 349 420 450 470 510 550
368
pool heating
Heat exchangers
Alaska
Compact design, for outdoor installation.
Made of non-corrosive magnesium coated aluminium.
Titanium evaporators with PVC shells and in G2 titanium coil according to ASTM B 338.99 standard. Guar-
anteed against corrosion.
Condenser made of copper pipe with coated aluminium fins (special for corrosive environments).
Sealed scroll compressor.
Refrigeration circuit of dehydrated, nitrogenated and deoxidised copper.
Helicoidal ventilators with direct coupling motor.
Refrigerant expansion via thermostatic expansion valve.
Anti-acid dehydrating filter.
Hydraulic connections in PVC.
Defrosting thermostat in evaporator.
Earth connection.
Filled with gas Freon R407C with low ecological impact.
Full adjustment of all the items included.
TECHNICAL FEATURES
MODELS ALASKA-4 ALASKA-6 ALASKA-8 ALASKA-10 ALASKA-12 ALASKA-15 ALASKA-17
CODE 32535 32536 32537 32538 32539 32540 32541
VOLTAGE V/Ph/Hz 230/2/50 230/2/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50
COMPRESSOR ROTARY
REFRIGERANT Kg 0.9 / R407 C 1.2 / R407 C 1.6 / R407 C 1.9 / R407 C 2.0 / R407 C 2.3 / R407 C 3.8 / R407 C
WATER FLOW m3/h 10 10 12 12 12 16 16
CONNECTION mm 50
HEAD LOSS kPa 14.3 19.1 23.1 26.5 33.4 31.1 38.9
VENTILATORS N / m3/h 1 / 3.800 1 / 4.900 1 / 5.500 1 / 9.800 2 / 9.800 2 /11.000 2 / 11.000
SOUND LEVEL dB (1 m) 67 67 67 70 70 70 70
27 C T AIR INPUT POWER 1.9 2.5 3.4 4.4 5 6.1 6.7
60% rH OUTPUT POWER 5.53 8.3 11.59 15.44 17.35 21.02 29.75
T WATER 24C COP 2.9 3.32 3.4 3.51 3.47 3.44 4.44
RECOMMENDED MAx. (m3) 9 14 20 26 30 36 50
POOL VOLUME MIn. (m3) 5 7 10 13 15 18 25
Calculations based on an air temperature of 27C at 60% RH. Water flow: 12 m/h. Water at 24C.
Maximum air temperature: 40C. Minimum water temperature: 10C. Maximum water pressure: 3.5 bar.
A
B
Dimensions (mm) Total weight

Code Model
A B C (Kg)
32535 ALASKA-4 1200 450 740 80
32536 ALASKA-6 1200 450 740 84
32537 ALASKA-8 1500 450 840 96
32538 ALASKA-10 1650 650 890 98
32539 ALASKA-12 1650 650 890 110
POOL HEATING
32540 ALASKA-15 2000 700 840 115

32541 ALASKA-17 2000 700 840 120
369
pool heating
Heat exchangers
Compact Electrical Exchanger

Body made of Stainless Steel AISI-316.
Sealed resistances in INCOLOY 825.
Housing in fireproof plastic.
Connections included.
Fixing brackets included.
High temperature safety switch (60C).
Manual reset system.
Temperature regulation thermostat from 0 to 45 C.
Control buttons.
Terminal for electrical connection.
Hydraulic circuit Pressure (bar) Cal. Pow. Maxi. Absorbed Intensity (A)
Model Min.Flow Maxi.Flow Hydr. Code
Serv. Maxi. kW I/220/50 III/220/50 III/380/50
A
(l/h) (l/h) Conn.
199
COMPACT 3 KW 1200 10000 11/2 2 3 3 14 - 4* 08756
COMPACT 6 KW 1200 10000 11/2 2 3 6 28 - 9* 08757
COMPACT 9 KW 1200 10000 1 /2
1
2 3 9 41 - 13* 08758
COMPACT 12 KW 1200 10000 1 /2
1
2 3 12 - - 17* 08759
315
COMPACT 18 KW 1200 10000 11/2 2 3 18 - - 26* 08760

195
* Standard voltage
A
199
95 295
50
315
195
95 295
Dimensions HEAD LOSS RELATED TO FLOW

Code Model (mm) 0,16
A 0,14
0,12
08756 COMPACT 3 477 0,10
m.w.h.
08757 COMPACT 6 552 0,08

0,06
08758 COMPACT 9 552 0,04
0,02
08759 COMPACT 12 647 0
08760 COMPACT 18 837 3000 4000 5000 6000 7000 8000 9000 10000
l/h
370
pool heating
Heat exchangers
Eco Electrical Exchanger

Body made of stainless steel AISI-316.
Electrical resistances with protection against corrosion.
Protection against lack of water with a water flow switch.
There are two thermostats: one for regulation and the other for safety with manual reset which prevents the
temperature from exceeding 65C.
Hydraulic circuit Pressure (bar) Cal. Pow. Maxi absorbed intensity (A)
Model Min. Flow Maxi Flow Hydraul. Code
Serv. Maxi. kW I/220/50 III/220/50 III/380/50
(l/h) (l/h) Conn.
ECO 3 KW 1200 10000 11/2 2 3 3 14 - 4* 27831
ECO 6 KW 1200 10000 11/2 2 3 6 28 - 9*A 27832
ECO 9 KW 1200 10000 11/2 2 3 9 41 199 - 13* 27833
ECO 12 KW 1200 10000 1 /2
1
2 3 12 - - 17* 27834
ECO 18 KW 1200 10000 11/2 2 3 18 - - 26* 27835
* Standard Voltage
315
A
195
215
95 295
170
120
50
95 110
Dimensions HEAD LOSS RELATED TO FLOW

Code Model (mm) 0,16
A 0,14
0,12
27831 ECO 3 450
m.w.h.
0,10
0,08
27832 ECO 6 528
0,06
27833 ECO 9 528 0,04
0,02
27834 ECO 12 620
0
27835 ECO 18 810 3000 4000 5000 6000 7000 8000 9000 10000
l/h
POOL HEATING
371
pool heating
Water/water plate heat exchanger
Titanium ElectricHeat
New generation of Titanium electric heaters for heating the water of swimming pool and spas, by means of
armed titanium resistances.
Body made of Titanium.
Sealed titanium resistances.
Temperature regulation thermostat from 0 to 45C.
Flow Switch.
Housing in fireproof plastic.
High temperature safety switch (60C).
Manual reset system.
Control buttons.
Terminal for electrical connection.
TIT-3 kW 41429 1 - -
TIT-6 kW 41430 1 - -
TIT-9 kW 41431 1 - -
TIT-12 kW 41432 1 - -
TIT-18 kW 41433 1 - -
Flow Hydr. conn. P [bar] I [A] Dimensions mm

Model Code W Hz
Min. [l/h] Maxi. [l/h] [mm] Serv. Maxi. II / 220 V III / 380 V A B C
TIT-3 KW 41429 3000 1.200 10.000 50 50 2 3 14 4 410 235 158
TIT-6 KW 41430 6000 1.200 10.000 50 50 2 3 28 9 410 235 158
TIT-9 KW 41431 9000 1.200 10.000 50 50 2 3 41 13 410 235 158
TIT-12 KW 41432 12000 1.200 10.000 50 50 2 3 - 17 410 235 158
TIT-18 KW 41433 18000 1.200 10.000 50 50 2 3 - 26 410 235 158
Electric Heater RTI-U

The titanium electric heater measures water temperature and automatically control the temperature desired.
Easy installation. Electronic thermostat with digital panel. For pools of 60 up to 120 m2. Body made of TI-
TANIUM. Daily programming clock. Wall bracket. Drain plug. Security thermostat with manual reset which
prevents the temperature from exceeding 60C. Protection IP-65. Power supply 230V 50Hz or 400 V 50 Hz.
RTI-U 12 kW 45738 1 12 0.005
RTI-U 15 kW 45739 1 12 0.005
RTI-U 18 kW 45740 1 12 0.005
Electric Heater RTI-EZ

The titanium electric heater measures water temperature and automatically control the temperature desired.
Electronic thermostat without digital panel. For pools of 30 up to 80 m2. Body made of TITANIUM. Installation
directly to the piping. Daily programming clock. Protection IP-43. Power Supply 230V 50Hz or 400 V 50 Hz.
RTI-EZ 3 kW 45741 1 4.3 0.019
RTI-EZ 6 kW 45742 1 4.3 0.019
RTI-EZ 9 kW 45743 1 4.3 0.019
372
pool heating
Waterheat
Heat exchanger suitable for warming the temperature of swimming pools and SPAS, thanks to the heat ex-
change between primary circuit and the secondary one.
Casing built in ABS + Alucoil, body made in titanium.
Coils made in titanium.
TIT-20 kW 41426 1 - -
TIT-40 kW 41427 1 - -
TIT-60 kW 41428 1 - -
[kW] Primary Secondary Dimensions [mm]

Code
90/70C 60/40C m3/h mca m3/h mca A B C D E F
41426 20 10 1.6 0.09 10 0.01 293 129 120 55 11/2" 3/4"
41427 40 20 1.6 0.14 15 0.01 388 129 215 55 11/2" 3/4"
41428 60 30 2.5 0.17 20 0.01 509 129 336 55 11/2" 3/4"
Equipped Waterheat
Heat exchanger suitable for warming the temperature of swimming pools and SPAS, thanks to the heat ex-
change between the primary circuit (warm area) and the secondary one (cold area that we want to warm).
Casing built in ABS + Alucoil.
Body made in polished steel Inox. AISI-316 (secondary, swimming pool water).
Coils made in alloy of titanium (primary, water from boiler).
Supplied totally equipped with 3 Ways Valve, Recirculation pump and Thermostat.
Primary pressure work 10 bars.
Secondary pressure work 3 bars.
CONNECTIONS:
Primary (heating): 1'' 1-1/2''
Secondary (swimming pool): 50 mm.
TIT-20 kW 43506 1 - -
TIT-40 kW 43507 1 - -
TIT-60 kW 43508 1 - -
[kW] Primary Secondary Dimensions [mm]

Code
90/70C 60/40C m /h
3
mca m /h3
mca A B C D
43506 20 10 1.6 0.09 10 0.01 530 395 160 215
43507 40 20 1.6 0.14 15 0.01 530 490 160 225
43508 60 30 2.5 0.17 20 0.01 530 585 160 305
POOL HEATING
373
pool heating
Etna
Corrugated plates in AISI-316 or Titanium.
EPDM gaskets.
Housing in epoxy painted carbon steel.
In "unequipped" heat exchangers, stainless steel connections AISI-316 or polypropylene in ISO G2 direct thread.
In "equipped" heat exchangers, primary connections in copper, and secondary in PVC.
In "equipped" heat exchangers, full regulation, with control of the filtering pump. Double display (setpoint and current reading).
Recirculating pump in the primary circuit is optional.
Basic model Equipped model Equipped model +

recirculating pump
Primary Circuit Secondary Circuit

Power Consumption
Model N Plates Head loss
kcal/h. m3/h Connections m3/h Head loss Connections (A)
m.w.h.
ETNA-15 HEAT EXCHANGER 15000 5 0.8 3 3/4 1.1 3 3/4 0.30
ETNA-35 HEAT EXCHANGER 35000 9 1.8 3 3/4 1.76 3 3/4 0.40
ETNA-50 HEAT EXCHANGER 50000 13 2.6 3 1 2.51 3 1 0.40
ETNA-90 HEAT EXCHANGER 90300 21 4.6 3 1 /4

1
4.3 3 1 /4
1
1.4
ETNA-120 HEAT EXCHANGER 120000 27 6.2 3 1 1 /2 6.02 3 1 1 /2 1.45

1
8.02 3 1 /2
1
1.45
ETNA-350 HEAT EXCHANGER 350000 21 18 3 2 1 /2 17.56 3 2 1 /2 1.7

1
23.2 3 2 /2
1
2.45

1
24.8 3 2 /2
1
2.45
374
pool heating
Etna
POOL
WATER
PROGRAMMER OUTLET
RECIRCULATION
PUMP
THREE-WAY
VALVE
HEATING
WATER
INLET
HEATING
WATER
OUTLET
POOL
WATER
INLET
Dimensions (mm)
Model
H A E F Lt L I J K
Basic model
220
15-200 460 200 357 60 N PLATES X 2.9 + 3 - - -
370
250-580 745 310 603 124 630 N PLATES X 3.42 + 3.5 - - -
Models from INT-35 to INT-270 Models from INT-300 to INT-580
Dimensions (mm)
Model
H A E F Lt L I J K
Equipped model / Equipped model with recirculating pump
220
15-270 460 200 357 60 N PLATES X 2.9 + 3 540 H+10 620
370
POOL HEATING
300-580 745 310 603 124 630 N PLATES X 3.42 + 3.5 540 H+10 905
375
pool heating
Etna
Code Description Code
AISI-316 Plate heat exchanger Titanium
Basic model
43237 INT-15 WATER/WATER PLATE HEAT EXCHANGER 43233
Equipped model
33117 INT-15 EQUIPPED WATER/WATER PLATE HEAT EXCHANGER 33145
Equipped model + Recirculation pump
33122 INT EQUIPPED+RECIR-15 WATER/WATER PLATE HEAT EXCHANGER 33163
376
pool heating
Gas heaters for pools and spas
MX and HX Electronic Gas Heaters

Electronic Ignition - 220V-240V input, 24 Tranformer, LCD temperature display, pool & spa separate set points,
corrosion resistant copper nickel heat exchanger, glass reinforced nylon headers, glue in plastic connections,
outdoor weatherproof, marine grade powder coated inside and out.
Ordering: For indoor installation, order Draught Diverter, specify plumbing connection size (EUR or USA),
specify Gas Type.
Please inquire with your nearest branch for other options available:
MX Millivolt Standing Pilot Gas Heaters with mechanical thermostat
MX Commercial Grade Gas Heaters with bronze headers
MX Heaters suitable for LPG
Draught Diverters for Indoor Installation of MX Gas Heaters
kW kW
Input Output
HX 70 Gas Natural 20 - 56364 1 25 0.174
HX 70 LPG Gas 20 - 56365 1 25 0.174
HX 120 Gas Natural 32 - 56366 1 35 0.266
HX 120 LPG Gas 32 - 56367 1 35 0.266
MX 125 35 25 41358 1 54 0.310
MX 150 44 35 41359 1 61 0.361
MX 200 54 43 41360 1 75 0.460
MX 250 67 55 41361 1 85 0.507
MX 300 82 70 41362 1 89 0.542
MX 400 106 85 41363 1 95 0.624
MX 500 133 114 41364 1 125 0.818
Dimensions (mm) Gas Weight

HX HEATERS Model
A B C (mm) (Kg)
HX 70/WX75 720 320 415 15 21

HX 120/WX120 820 390 515 15 25
MX 125 370 790 - 20 42
MX 150 460 790 - 20 50
MX 200 640 790 - 20 58
MX 250 710 790 - 20 66
MX 300 775 790 - 20 74
MX 400 910 790 - 20 90
MX 500 1100 930 - 25 110
MX HEATERS
POOL HEATING
377
pool heating
For further information, Solar collectors

contact [email protected]
VEICO Solar Collectors for Solar Heating
VEICO solar collectors for solar heating are a source of renewable energy, inexhaustible and non-polluting. They
were developed in order to heat large volumes of water with the greatest cost savings and as practically as possible.
The thermoplastic materials used are all of certified origin by petrochemical standards, and no recycled materials
are used, in order to extend the useful life of the products.
The solar collectors are manufactured from polypropylene with anti-UV additives and colouring in black, highly
resistant rubber sealants and clamps, as fixing elements, injected in ABS plastic with 5% FV.
Main Benefits
Lightweight and flexible
Easy-to-install
Increased value for money
Circulation flow of up to 275 litres/hour
Normal working pressure of 10 MCA or 1 BAR, and maximum working pressure of 40 MCA or 4 BAR.
Greater absorption area per m2 with a high level of performance.
Highly resistant to low temperatures.
High performance in generating hot water
Low maintenance cost.
Without the risk of corrosion, it can be used in pools treated with salt electrolysis, in which metallic collec-
tors could not be used.
Connection between the panels by means of easy-to-use clamps on a hinge system.
Able to operate on different angles.
Low risk of calcificationn.
Sensor Holder
Solar Panels
The solar collectors are made from special, long-lasting polymers with high durability and resistance to UV rays.
They are available in standard models of 3 x 0.5 m and 4 x 0.5 m
Temperature Sensor holder
Made of ABS, it contains copper housing for the water temperature sensor. Connection is through glued PVC
tubing of 50 mm.
Installation Kit
This kit is used to connect the battery and solar collector tube to the pools hydraulic system. It includes 4
Digital Controller clamps with locks, 4 rubber seals, 2 plugs and 2 adaptors.
Digital Controller for Heating
This equipment is essential for the heating system to work. It controls the pump that exchanges cold water for hot water
in accordance with the readings from the pool sensors. In addition to controlling the system operationally, there is
also a function to protect against freezing and/or heating by external temperature. The screen displays the readings
and the functions carried out. It is capable of operating motors of 1.5 CV in the 220 V and 3/4 CV versions of 110 V.
Analogue Controller for CV-01 Heating
The analogue controller is capable of conducting the functions of the heating system in a fast, simple way.
Analogue Controller Packing Weight kg Volume m3
Solar Panel 3 x 0.5 m 700300 1 - -
Solar Panel 4 x 0.5 m 700400 1 - -
Solar Panel 5 x 0.5 m 700500 1 - -
Solar Panel 6 x 0.5 m 700600 1 - -
Temperature sensor holder
(4 clamps / 4 joints / 4 plugs / 2 adaptors) 709150 1 - -
Assembly kit 100901 1 - -
Digital controller for 110 V 707770 1 - -
Digital controller for 220 V 701220 1 - -
Analogue controller 500101 1 - -
Assembly Kit
Clamp 709110 1 - -
Clamp close 709120 1 - -
Clamp joint 709140 1 - -
Lid 709160 1 - -
50 mm adaptor 70913 1 - -
Black temperature sensor 500100.16 1 - -
Grey temperature sensor 500100.17 1 - -
378
pool heating
Dehumidifiers
CDP LINE Dehumidifier

The CDP LINE dehumidifier (a pool dehumidification unit) is used in installations where individual humidity
and temperature control of the area is required. It takes advantage of the latent heat of porisation and the
equipment performance itself in heating the room air of small pools, tubs, changing rooms and bathrooms.
Equipment descrition
Body in ABS and ALUCOIL.
Thermal-acoustic inside insulation.
Monoblock evaporation and condensation batterymadeout of copper pipes with lacquered aluminium fins
(specially designed for corrosive environments).
Airtight compressor with an internal protection mechanism, carter resistance and a muffler.
A copper-nitrogen, dehydrated and deoxidized refrigerated circuit.
Centrifugal ventilator with different flows.
Ozone-safe R407C gas charge (ecological).
Condensation collection gutter.
Wall or floor machine to be placed inside the pool or behind the wall (built-in model, comes with wall bush-
ing and grilles).
Pressure-balancing expansion valve.
Electric or hot water post-heating battery.
CONTROL:
Control of humidity and temperature with Hygro-thermostat, with humidity and temperature probe.
Automatic reset mini-pressure switches.
Defrost thermostat.
ASSEMBLY AND MAINTENANCE:

Easy and quick assembly and maintenance access.
Outside load shell sockets to connect manifold gauges.
Easy to clean filters and machinery.
General Operating Conditions

Installation air temperature: 28C.
Humidity: 65 %.
Minimum installation air temperature: 18C
Code Description
41493 CDP-2+E (220) Dehumidification Capacity 2.1 l/h + Electrical Battery 4 Kw

41494 CDP-2+E (220) 2.1 l/h + Electrical Battery 4 Kw. Built-in model
41495 CDP-2+A (220) Dehumidification Capacity 2.1 l/h + hot water post-heating 6 Kw
41496 CDP-2+A (220) 2.1 l/h + hot water battery 6 Kw. Built-in model
41497 CDP-3+E (220) Dehumidification Capacity 3.1 l/h. + Electrical Battery 4 KW
41498 CDP-3+E (220) 3.1 l/h. + Electrical Battery 4 Kw. Built-in model
41499 CDP-3+A (220) 3.1 l/h + hot water battery 9 Kw
41501 CDP-4+E (220) Dehumidification Capacity 4.2 l/h. + Electrical Battery 5 Kw
41503 CDP-4+A (220) Dehumidification Capacity 4.2 l/h + hot water post-heating 12 Kw
41505 CDP-5+E (220) Dehumidification Capacity 5.1 l/h. + Electrical Battery 5 Kw
41507 CDP-5+A (220) Dehumidification Capacity 5.1 l/h + hot water battery 12 Kw
POOL HEATING
379
pool heating
Dehumidifiers
CDP LINE Dehumidifier
CDP-2 CDP-3 CDP-4 CDP-5
Dehumidification capacity 2.1 lts/h 3.1 lts/h 4.2 lts/h 5.1 lts/h
Calorific power (water condenser) 4,277 W 5,313 W 7,068 W 8,473 W
Compressor
Units 1 1 1 1
Type Hermetic
Voltage 220V II 220V II 220V II 220V II
Frequency 50 HZ 50 HZ 50 HZ 50 HZ
Consumption. (Amp) 6.01 7.04 8.91 10.4
Nominal power (kW) 1-F 1 1/4-F 1 5/8-F 2-F
Ventilator
Type Centrfugal
Units 1 1 1 1
Flow rate (m3/h) 700 800 1.000 1.200
Consumption. (Amp) 1.1 1.1 1.1 1.1
Voltage 220 V 220 V 220 V 220 V
OTHER DATA
Nominal consumption 7.1 Amp 8.2 Amp 10.01 Amp 11.5 Amp
Refrigerant gas R-407C R-407C R-407C R-407C
Weight in kg + Electrical Battery 74 74 92 92
Weight in Kg + A.C. battery 78 78 102 102
Calculations based on an air temperature of 28C at 70% de RH.
Optional
OPTIONAL CDP-2+E CDP-3+E CDP-4+E CDP-5+E

Electrical Resistance Battery Kw 4 4 5 5
HOT WATER BATTERY CDP-2+A CDP-3+A CDP-4+A CDP-5+A

Hot water battery Kw 6 9 12 12
Primary Flow rate l/h 270 400 600 600
Water pressure drop m.w.h. 0.27 0.30 0.35 0.35
Collector Diameter inches
Dimensions
DIMENSIONS CDP-2 CDP-3 CDP-4 CDP-5

Length (A) (mm) 1200 1200 1500 1500
Height (mm) 900 900 900 900
Width (mm) 300 300 300 300
380
pool heating
Dehumidifiers
Confort Compisa BDP dehumidifying unit

The COMPISA BDP heat pump is used for the dehumidification of indoor pools, using the latent heat of evapo-
ration and the performance of the system itself to heat the pool water and the room air.
The energy savings achieved with these systems compared to traditional climatization systems mean that they
are virtually essential when you wish to heat an indoor pool. The wide range of models covers all requirements
of the market.
Body made out of painted and lacquered galvanised steel sheet. Self supporting chassis and demountable
access panels. Closing panels with rubber gasket to ensure water-tightness.
Thermal-acoustic inside insulation.
Direct transmission single centrifugal ventilator.
Changeable and cleanable air filter, with 83% to 90% gravimetric efficiency.
Condensation collection gutter with drainpipe.
A copper nitrogen, dehydrated and deoxidised refrigerated circuit. Air condensation.
Ozone-safe R407C refrigerant gas charge (ecological).
Evaporation, condensation and hot water batteries made of copper pipes with lacquered aluminium fins
(specially-designed for corrosive environments).
Airtight compressor mounted onto anti-vibration mounts.
Pressure balancing expansion valve.
High and low pressure switch.
General security switch.
Power source, compressor and ventilator motor protection mechanisms.
Complete regulation of all equipment elements.
Three-way valves and their regulation when a hot water battery is incorporated.
OPTIONAL:
1 or 2 stage electrical resistance to support air heating.
Hot water battery to support air heating, with three-way valve, temperature probe and regulation.
(ask about primary temperatures that are different than the standard equipment)
Mixture chamber and shutter to bring in outside air.
Titanium water condenser.
General Operating Conditions
The thermal hygrometric conditions for these facilities that are considered optimal for materials and people
include:
Air 28C - 30C
65% HR
Water 2C below the air temperature
Code Model
41422 Compisa BDP-4 air/low air silhouette dehumidifier + 10,000 kcal/h water battery
41423 Compisa BDP-4 air/low air silhouette dehumidifier 5 kw electrical battery
41424 Compisa BDP-5 air/low air silhouette dehumidifier + 10,000 kcal/h water battery
41425 Compisa BDP-5 air/low air silhouette dehumidifier 5 kw electrical battery
41539 COMPISA BDP-06 DEHUMIDIFYING HEAT PUMP CONFORT
41592 Compisa BDP-06 comfort mixture chamber
26514 ELECTRIC POST-HEATING+REGULATION Pow. 5 KW
POOL HEATING

26520 POST-HEATING (WATER BOILER) + 3 WAY V. BDP - 06
26521 AFTER-HEATING BATTERY (WATER BOILER) + 3 WAY V. 20000KH FOR BDP-08
381
pool heating
Dehumidifiers
Confort Compisa BDP dehumidifying unit
MODELS BDP-4 BDP-5 BDP-6 BDP-8 BDP-10 BDP-12 BDP-16

Dehumidifying capacity (1) I/h 4.2 5.2 5.9 8.3 11 12.5 17.35
Heat power (w) (Water) W 7068 8473 11598 12395 13826 19121 26648
Heat power (w) (Air) W - - - - - - -
HEATING POWER - TOTAL AIR (2) W
COOLING CIRCUIT
N of circuits 1 1 1 1 1 1 1
N compressors 1 1 1 1 1 1 1
Type of compressors ROTARY
Cool fluid R-407C
Gas load Kg. 3 3.5 4 5 9 9 10
Voltage V/Ph/Hz 230/2/50 400/3/50
Max. consumption KW 1.8 2.4 3.71 3.66 4.33 5.49 6.81
Max. intensity A 8.39 11.19 17.3 7.65 7.02 7.19 11.7
FANS
Type CENTRIFUGAL
Air Flow m3/h 1000 1200 1800 2800 3800 4300 5500
Available pressure m.w.h. 15 15 20 20 20 20 20
Max. consumption RETURN 0.2 0.2 0.25 0.55 1.1 1.1 3.00
Max. intensity RETURN 2.5 2.5 2.5 5 3.52 3.52 4.6
OTHER DATA
Drain mm 22 22 22 22 22 22 22
Noise level at 1 m. dB 68 68 68 68 69 69 70
Weight Kg 100 110 160 182 270 360 448
Type of Batteries Cu - Al (Laquered for corrosive environments)
Air filters G4
OPTIONS
Electric battery power W 5000 5000 - - - - -
Power w 11600 11600 22200 22200 35000 35000 64000
HOT WATER BATTERY (3)
Primary temperature C 90
AIR HEATING BY
C 70
Flow l/h 500 500 990 990 1590 1590 2.420
Connection inches 3/4 3/4 3/4 3/4 3/4 3/4 3/4
Head loss m.w.h. 2.1 2.1 2.7 2.7 2.3 2.3 1.9
1) Data at 28C air, 65% HR, water at 24C.
2) Valid for blowing and return. Both air flow and pressure available can vary, in which case consumption and dimensions may vary too. Please consult.
3) You can evaluate other powers and temperature changes. For small equipment there are codified electric batteries. Please consult.
382
pool heating
Dehumidifiers
Compisa BDP dehumidifying unit

The COMPISA BDP heat pump is used for the dehumidification of indoor pools, using the latent heat of evapo-
ration and the performance of the system itself to heat the pool water and the room air, and to control the three
parameters which define comfort in a swimming pool: water, air and relative humidity.
The energy savings achieved with these systems compared to traditional climatization systems mean that they
are virtually essential when you wish to heat an indoor pool. The wide range of models covers all requirements
of the market.
Monoblock design.
Construction with dismountable panels of galvanized steel, plastified on their outer surface (PVC plastic
film) and with non-corrosive protection (5 primer paint, with thermosetting Epoxy resin base and oven-
dried), and thermoacoustic protection (sound-absorbing panel in expanded polyurethane) on their inner
walls joined with profiles of coated aluminium.
Removable and cleanable air filter, with 83% to 90% gravimetric efficiency.
Stainless steel condensation collection tray with drain pipe of 13, 16 and 23 mm according to model.
Titanium water condenser.
Evaporator, condenser, and hot water unit, made of copper tube with coated aluminium fins (special for
corrosive environments).
Hermetic compressor.
One or two refrigeration circuits of nitrogenated, dehydrated and deoxidised copper, according to models.
Centrifugal motor-fans, with direct transmission or by belts, pulleys and electric motor mounted on adjust-
able tensioner, with the possibility of varying flows and standard available pressures (this option on order).
Free-cooling made up of three gates and recovery ventilator. This option must be ordered.
Filled with refrigerant gas R407C with low environmental impact.
Expansion valve with pressure balancing unit.
Possibility of condensing 100% water or 100% as an option which must be ordered especially.
Possibility of including water-water plate heat exchangers in series with water condensers to back-up the
heating of the pool (this option must be ordered; contact the Sales Department).
Possibility of adding external condenser to expel excess heat from the installation. (This option must be
ordered especially).
Full regulation of all elements of the unit.
Three-way valves and a hot water unit and a water-water heat exchanger are built-in.
Hydraulic connections in PVC.
POOL HEATING
1) Data at 28C air, 65% RH, water 24C. 5) In case of not lead Freecooling only blowing fan.
2) Air and water condensation. 6) You can evaluate other powers and temperature changes. For small equipment there
3) 100% air condensing. are codified electric batteries. Please consult.
4) Valid for blowing and return. Both air flow and pressure available can vary, 7) Consume added to the global equipment.
in which case consumption and dimensions may vary too. Please consult.
383
pool heating
Dehumidifiers
MODELS BDP-6 BDP-8 BDP-10 BDP-12 BDP-16 BDP-21 BDP-25 BDP-30

Dehumidification capacity (1) I/h 5.9 8.3 11 12.5 17.35 21.95 25.2 31.3
Calorific power (w) (Water condenser) W 5219 5518 5222 8604 11092 13599 15262 21023
Calorific power (w) (Air condenser) (2) W 6379 6817 7504 10517 13556 16622 19875 25655
HEATING POWER - TOTAL AIR (3) W 11598 12315 13825 19121 24648 30221 35137 46718
WATER CONDENSER
Type TITANIUM
N Condensers 1 1 1 1 1 1 1 1
Water flow m3/h 8 8 8 8 10 10 12 12
Head loss m.c.a. 1 1 1.2 1.2 1.2 1.2 1.2 1.3
Connections 50
COOLING CIRCUIT
N of circuits 1 1 1 1 1 1 1 1
N Compressors 1 1 1 1 1 1 1 1
Type of compressors ROTARY
Cool fluid R-407 C
Gas load Kg 4 5 9 9 10 18 19 20
Voltage V/Ph/Hz 230/2/50 400/3/50
Max. consumption KW 3.71 3.66 4.33 5.49 6.81 8.33 10.29 11.56
Max. intensity A 17.3 7.65 7.02 7.19 11.7 14.9 17.3 20
FANS
Type CENTRIFUGAL RADIAL
Air flow (4) m3/h 1800 2800 3800 4300 5500 5500 7000 7000
Available presssure (4) m.w.h. 20 20 20 20 20 20 20 20
BLOWING 0.25 0.55 1.1 1.1 3.00 3.00 2.80 2.80
Max. consumption KW (5)
RETURN 0.25 0.25 0.55 0.75 1.45 1.45 2.38 2.38
BLOWING 2.5 5 3.52 3.52 4.6 4.6 4.2 4.2
Max. intensity A (5)
RETURN 2.5 2.5 4.6 5.5 3.2 3.2 5 5
OTHER DATA
Drain mm 22 22 22 22 28 28 28 28
Noise level at 1 m. dB 68 68 69 69 70 70 70 71
Weight without FREECOOLING Kg 150 182 270 360 448 626 850 1149
Weight with FREECOOLING kg 234 240 350 450 700 1022 1100 1472
Type of batteries Cu-AI ((Laquered for corrosive environments)
Air filters G4, F6, F8
OPTIONS
Power w 22200 22200 35000 35000 64000 54900 54200 64200
HOT WATER BATTERY Secondary temp. C 70
(6) Flow l/h 950 950 1580 1580 2420 2420 2420 2830
Connection inches 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1
Head loss m.w.h. 2.7 2.7 2.3 2.3 1.9 1.9 1.9 3.9
HEAT EXCHANGER Air extraction flow m3/h 1800 1800 2800 2800
AIR / AIR Efficiency % 50 50 50 50
Cooling Power KW 7.89 8.74 9.5 13.63 17.84 21.89 25.85 35.15
Air flow 4000 4000 5000 5000 7000 7000 7000 9000
REMOTE CONDENSER Type of fan RADIAL
(7)
Fan consumption KW 1.45 1.45 1.45 1.45 2.37 2.37 2.37 2.37
Max. intensity. A 5.5 3.20 3.20 3.20 3.75 3.75 3.75 3.75
1) Data at 28C air, 65% RH, water 24C. 5) In case of not lead Freecooling only blowing fan.
2) Air and water condensation. 6) You can evaluate other powers and temperature changes. For small equipment there
3) 100% air condensing. are codified electric batteries. Please consult.
4) Valid for blowing and return. Both air flow and pressure available can vary, 7) Consume added to the global equipment.
in which case consumption and dimensions may vary too. Please consult.
384
pool heating
Dehumidifiers
MODELS BDP-35 BDP-44+F BDP-50+F BDP-60+F BDP-82+F BDP-110+F BDP-140+F BDP-160+F

Dehumidification capacity (1) I/h 36.6 43.7 53.3 65.6 87.7 112.7 140 163.4
Calorific power (w) (Water condenser) W 22210 27197 32523 42135 45540 51554 75322 86620
Calorific power (w) (Air condenser) (2) W 27145 33241 39751 51499 55660 63010 92060 105869
HEATING POWER - TOTAL AIR (3) W 49355 60438 72274 93634 101200 114564 167382 192489
WATER CONDENSER
Type TITANIUM
N Condensers 1 2 2 2 2 4 4 4
Water flow m3/h 12 24 24 24 24 48 48 48
Head loss m.c.a. 3.4 3.4 3.4 3.6 3.6 4.4 5.5 5.5
Connections 50 63 63 63 63 90 90 90
COOLING CIRCUIT
N of circuits 1 2 2 2 2 2 2 2
N Compressors 1 2 2 2 2 2 2 2
Type of compressors ROTARY SCROLL
Cool fluid R-407 C
Gas load Kg 22 36 38 40 50 60 70 80
Voltage V/Ph/Hz 400/3/50
Max. consumption. KW 14.09 2 x 8.33 2 x 10.29 2 x 11.56 2 x 14.79 2 x 17.34 2 x 23.85 2 x 23.85
Max. intensity. A 23.2 2x14.9 2 x 17.3 2 x 20 2 x 24.3 2 x 29.2 2 x 35.7 2 x 35.7
FANS
Type RADIAL
Air flow (4) m3/h 7000 12000 12000 18000 22000 22000 30000 35000
Available presssure (4) m.c.a. 20 20 20 20 20 20 20 20
BLOWING 2.80 5.03 5.03 2x2.8 2x2.8 2x2.8 3x2.8 3x5.03
Max. consumption KW (5)
RETURN 2.38 4.25 4.25 2x2.38 2x2.38 2x2.38 2x4.25 2x4.25
BLOWING 4.2 7.7 7.7 2x4.2 2x4.2 2x4.2 3x4.2 3x7.7
Max. intensity A (5)
RETURN 5 7.55 7.55 2x5 2x5 2x5 2x7.55 2x7.55
OTHER DATA
Drain mm 28 28 28 28 28 28 28 28
Noise level at 1 m. dB 71 72 72 73 73 74 74 75
Weight without FREECOOLING Kg 990
Weight with FREECOOLING kg 1348 2087 2112 2187 2280 2500 3400 3700
Type of batteries Cu-AI (Laquered for corrosive environments)
Air filters G4, F6, F8
OPTIONS
Power w 64200 121000 121000 146000 187000 220000 327000 327000
HOT WATER BATTERY Secondary temp. C 70
(6) Flow l/h 2830 5340 5340 6450 8250 9720 14390 14390
Connection PULG. 1 1 1 11/2 11/2 11/2 2 2
Head loss m.c.a. 3.9 2 2 1 3.3 2 3.5 3.5
HEAT EXCHANGER Air extraction flow m3/h 2800 3800 3800 5500 7000 7000 9000 10500
AIR / AIR Efficiency % 50 50 50 55 55 55 55 55
Cooling Power KW 35.27 43.78 51.69 70.51 71.62 79.88 109.32 134.43
Air flow 9000 12000 12000 14000 18700 25000 32000 32000
REMOTE CONDENSER Type of fan RADIAL
(7)
POOL HEATING
Fan comsumption KW 2.37 4.25 4.25 4.25 4.75 4.75 8.5 8.5
Max. intensity A 3.75 7.50 7.50 7.5 10 10 15.5 15.5
385
pool heating
Dehumidifiers
Steel Sheet
Steel sheet model
Code
COMPISA BDP-06 DEHUMIDIFYING HEAT PUMP 26498
BDP-06 DEHUMIDIFIER + WATER CONDENSER +FREE COOLING 28311
BDP-30 DEHUMIDIFIER + WATER CONDENSER + FREE COOLING 28318
COMPISA BDP-110 DEHUMIDIFYING HEAT PUMP + FREE COOLING 26511
ELECTRIC POST-HEATING+REGULATION Pow. 5 KW 26514
POST-HEATING (WATER BOILER) + 3 WAY V. BDP - 06 26520
AFTER-HEATING BATTERY (WATER BOILER) + 3 WAY V. 20000KH FOR BDP-08 26521
386
pool heating
Dehumidifiers
Steel sheet
Steel sheet model
Code
AFTER-HEATING BATTERY (WATER BOILER) + 3 WAY V. 60000KH FOR BDP-30 / BDP-35 26527
AFTER-HEATING BATTERY (WATER BOILER) + 3 WAY V. 100000KH FOR BDP-44 / BDP-50 26528
AFTER-HEATING BATTERY (WATER BOILER )+ 3 WAY V. 200000KH FOR BDP-110 26531
COMPISA BDP 06-08 PLENUM 1 AIR DISCHARGE GRID + 2 RETURN GRIDS 26534
COMPISA BDP 25-30-35 PLENUM 1 AIR DISCHARGE GRID + 2 RETURN GRIDS 26537
COMPISA BDP 82 PLENUM 1 AIR DISCHARGE GRID + 2 RETURN GRIDS 26539
COMPISA BDP 61 PLENUM 1 AIR DISCHARGE GRID + 2 RETURN GRIDS 26540
SUPPLEMENT: PROPORTIONAL REGULATION. FOR FREE COOLING 26627
WATER/WATER HEAT EXCHANGER + 3 WAY 35000 Kcal./h 26550
EXTERNAL CONDENSER BDP-6 41089
POOL HEATING
387
pool heating
Dehumidifiers
BDP-06 - BDP-08 - BDP-10 - BDP-12 Compisa BDP dehumidifying units
Weight
Model A B C D E
Kg
BDP-06 1.600 1300 630 340 310 234
BDP-08 1.600 1300 630 340 310 240
BDP-10 1.600 1500 630 320 350 350
BDP-12 1.600 1500 630 410 350 450

BDP-06 - BDP-08 - BDP-10 - BDP-12 Compisa BDP dehumidifying units with Freecooling
Weight
Model A B C D E
Kg
FREECOOLING
895 1250 650 210 500 140
BDP-06
FREECOOLING
895 1250 650 210 500 140
BDP-08
FREECOOLING
995 1500 825 310 600 160
BDP-10
FREECOOLING
995 1500 825 310 600 160
BDP-12

P-1
388
pool heating
Dehumidifiers
BDP-16 - BDP-21 - BDP-25 - BDP-30 - BDP-35 - BDP-44 - BDP-50 - BDP-60 BDP dehumidifying units
IMPULSION IMPULSION
G D E F E
Dimensions (mm)
Model
A B C D E F G
BDP-16 1100 1930 1680 50
C CUADRO
ELECTRICO
BDP-21 1100 1930 1680 310 294 194 50
BDP-25 1300 1930 1680 310 346 243 50
BDP-30 1300 1930 1680 362 329 224 50
BDP-35 1300 1930 1680 50
100
BDP-44 1500 2400 2250 365 406 304 120
40 A B BDP-50 1500 2400 2250 426 490 364 120
BDP-60 1500 2400 2250 500 448 323 120

The size of the ducts can vary depending on the air flow rate demand.(*)
Sizes D, E and F: Possible dimensions of the discharge connections
BDP-16 - BDP-21 - BDP-25 - BDP-30 - BDP-35 Compisa BDP dehumidifying units with Freecooling
Dimensions of the air discharge connections

A B C D
(mm) (mm) (mm) (mm)
310 294 194 500
310 346 243 550
362 329 224 650
The size of the ducts can vary depending on the air flow rate demand.
POOL HEATING
389
pool heating
Dehumidifiers
BDP-44 - BDP-50 - BDP-60 - BDP82 - BDP-110 - BDP-140 - BDP-160 Compisa BDP dehumidifying units with FREECOOLING
1 -
BDP-25 - BDP-30 - BDP-35 Compisa BDP dehumidifying unit

Dimensions (mm)
Model
A B C D E F G H I J K
BDP-44+F 800 1300 1700 900 2200 1500 510 1400 365 406 304
BDP-50+F 800 1300 1700 900 2200 1500 510 1400 450 505 365
BDP-60+F 800 1300 1700 1200 2200 1500 510 1400 500 448 323
BDP-82+F 800 1300 1900 1200 2400 1500 510 2000 500 580 444
BDP-110+F 800 1300 1900 1200 2700 1500 510 2000 510 585 429
BDP-140+F 1200 1900 2100 1500 3000 1800 810 2000 659 622 460
BDP-160+F 1200 1900 2100 1500 3000 1800 810 2000 659 622 460
390
COMMERCIAL pool equipment
COMMERCIAL
POOL EQUIPMENT
393 Skypool Commercial Pools

399 Filter codification for commercial filters
400 Laminated Filters
401 Bobbin wound filters
428 Valve manifold
430 Control panel
431 Supports for valve manifold
432 Filtration media & accessories
433 Pressure gauge panels
435 Centrifugal pumps
446 Special Centrifugal pumps for sea water
450 Strainers
454 Valves and flanges
455 Salt electrolysis AND pH control
458 Neolysis Zero Salt x UV
459 UV automatic disinfection for public pools
461 Automatic regulation and control equipment
465 Water games and Ornamental water features
475 Starting blocks for competition pools
478 Lane ropes
483 Floats
485 Lane rope storage equipment
486 Lane rope accessories
488 Indicators
489 Turning panels
490 Anchoring sockets
491 Movable wall
492 Inox Spaecial Pools
COMMERCIAL POOL
EQUIPMENT
391
Skypool Commercial Pools
A versatile public pool... Skypool Commercial Pools can be adapted to all public
pool requirements with taylor made technical solutions.
Skypool Commercial Pools is the range of prefabricated Movable floors and booms are available; panels and over
panel pools developed by AstralPool for public pools. Sky- flow gutter can be individually adjusted to absorb possible
pool Commercial Pools is composed of a hot galvanised construction deficiencies in the slab or paving.
steel structure that facilitates the construction of all sizes This, combined with a variety of accessories, allow a more
of above or inground pools in a very short period of time. generalised use of the pool.
The method used by AstralPool in order to protect the ma A broad range of models and variations of Skypool Commer-
terials used from rust is hot galvanisation. This is an in cial Pools enable total adaptation to any existing infrastruc
novative process which is being applied for the first time tures such as stadiums, sports halls and other venues for
to 2mm thick steel sheets, and consists of immersing the any type of regional, national or international event. Fixed
steel in molten zinc baths at approximately 450C. models can also be created to increase pool facilities avail
able such us spa installations, hotels, water parks, etc.
Skypool Commercial Pools, high-performance pool
Quick assembly Excellent reliability

Reduced assembly time thanks to easy-to- Totally safe construction system using the
assemble fully prefabricated components. best components.
Extremely long-lasting The best investment

Manufactured for maximum quality, func No complex infrastructure required for a
tionality and durability. fully equipped pool at low cost.
COMMERCIAL POOL
EQUIPMENT
393
Fixed Skypool Commercial Pools
A multi-purpose pool anchored to the previously installed concrete slab with chemical anchors, can be adapted to the needs of any installation.
Depending on to your needs, you may choose between an above ground or an in-ground pool. The selection of one option or the other does not
need modifications to either the assembly method or the design of the panels or anchoring system. All procedures and materials are fully compat
ible for both alternatives.
The size and the amount of chemical plugs will depend on the type of pool.
Fixed Skypool Commercial Pools,

a multi-purpose pool fixed to the ground
Yeroskipou (Paphos-Chipre)
AstraPool co-operated with our partner Capershill Ltd. in the design, assembly and installation
of this prestigious project in record time, an Olympic swimming pool of 50 x 25 x 2 m.
The President of Cyprus, Mr Tassos Papadopoulos, attended the inauguration alongside other
official government representatives on 30 July 2004.
The material supplied by AstraPool for this project:

-- Hot galvanised steel panels
-- Liner
-- Ceramic overflow
-- 8 bobbin-wound filters of diameter 2000 mm
-- Ozone generator
-- Accessories: overflow grating, podiums, false start and backstroke indicators, lane ropes
with winding mechanism, underwater projectors (28) and fittings.
Skyline Skypool (Manchester - UK)

The company Cheshire Spas and Pools installed the first permanent skypool in the UK. This
time, the Skypool by AstraPool was installed on the 18th floor of a new, prestigious residential
complex in Manchester and will become one of the highest swimming pools in Europe. The
swimming pool, along with a gym, sauna and steam room, makes up the leisure area in this
residential complex with 248 apartments.
The material supplied by AstraPool for this project:

-- 2 VIC filters of diameter 1.2 m
-- 9 LED projectors
-- 2 swimming pool stairs with overflow
-- 2 Maxim pumps
-- White PVC pool basin material
394
Suspended Skypool Commercial Pools
Panels are mounted onto structures which are joined via a longitudinal beam. In order to be able to withstand water pressure, opposing blocks are
connected via steel cables which run length and breadth-wise across the pool floor.
In order to fully conceal the cables, a raised floor is installed. The final result is a perfectly level and consistent slab onto which the liner can be
fitted. As the water fills the shell of the
pool, the steel cables become tighter, counteracting the pressure exerted by the water mass on the pool structure.
Suspended Skypool Commercial

Pools, an adaptable and temporary pool
Melbourne 2007 Manchester 2008
COMMERCIAL POOL
EQUIPMENT
395
The panel set elements
The panel set is composed of a series of elements that form the basic assembly unit. Each set is essentially made up of a panel,
overflow channel and reinforcing brackets.
The panel, pool wall Overflow channel Supporting brackets
EGO Panels
Besides straight panels, we
also offer curved models
(EGO panels) which allow
free form pools of all sizes
to be easily constructed.
Skypool Commercial Pools panel sets

Several depths to choose from:
0.80 m high panel, for childrens pools.
1.20 m high panel, for leisure pools.
1.80 m high panel, for swimming pools.
2.00 m high panel, for Water polo pools.
Several widths to choose from:
0.50 m wide panel for 12.5 m wide pools.
0.80 m wide panel for 16.6 m wide pools.
1.00 m wide panel.
The widht of panels can be costum designed, depending on the needs of the pool design, up to 1 m wide.
Possible combinations:
Synchronised swimming pools 3.00 m deep composed of a 1.80 panel + a 0.40 m inverted swimmers step and
a 0.80 m panel.
Diving pools 5.00 m deep composed of a 2.00 m panel + a 1.80 panel + a 0.40 m inverted swimmers step and
a 0.80 m panel.
396
Liner
The best solution for pool watertightness. Manufactured in
150/100 reinforced PVC-P, this material is the most used
for lining pools thanks to enhanced malleability, resistance
to tearing, ease of welding, resistance to colour fading and
with a wide range of available colours.
1 Inner layer made of fiberglass.

2 Highly resistant PVC.
Placing of the liner
In Skypool Commercial Pools, the liner is installed by welding several rolls together until the entire surface of the basin is fully water
tight. The liner is laid from the external part of the overflow to prevent the panel surface coming into contact with water. This prevents
any leakage due to possible structural movements, insufficient tightening or an inadequate gasket arrangement.
Pool shell accessories feature a sealing system with gaskets to prevent any leakage.
Return and suction inlets

A side or bottom return system for filtered water can be installed in all models and designs of Skypool Commercial Pools.
We recommend bottom return. This system ensures the perfect homogenisation of physical and chemical water parameters, since
the return inlets are evenly distributed.
The usage of automatic equipment for monitoring and controlling chemicals in the water requires installing a prefabricated pool suc
tion nozzle. The nozzle designed for Skypool Commercial Pools is manufactured entirely of ABS and complies with the established
standards, which require grille slots of 8 mm maximum.

COMMERCIAL POOL
EQUIPMENT
397
Accessories
Swimmers step, Movable boom, to adjust pool length

an extra feature for the pool
Mobile Platform that is submerged in the pool Starting block platforms

that allows the modification of the height of the glass of
the pool.
Diagram
H
A Plain liner 150/100.
B Black liner 150/100 (lane). G
C Plain non-slip liner 150/100.
D Bathers step.
A
I
E 2 mm thick panel with hot dip galvanized coating. F
F Panel tie rod.
G Overflow channel.
E
H Overflow grille in ABS. C
I Overflow drain.
J Bottom return inlet.
K Concrete slab.
B
J D K
398
Filter codification for commercial filters
Filter coding
The filter code is composed of eight digits. The first five digits correspond to the filter code and the last three digits correspond to the model this
information is given in the tables below.
This codification system is used for the Praga, Oslo, Olot, Ampuria, Rodas, Vic, Europe, Vesubio and Delta filters.
Position 1 2 3 4 5 6 7 8
Position 1 to 5: Five digit code of the standard product.
Position 6
Position 7 Position 8
Specifies the nozzle plate and
Specifies manhole options Specifies sightglass options
vinyester options
0 Filter without nozzle plate 0 No manholes 0 No sightglass
1 Filter with nozzle plate 1 1 225 mm manhole 1 1 sightglass for laminated filter
2 Vinylester finish 2 1 400 mm manhole 2 1 135 mm sightglass
3 With nozzle plate and vinylester 3 2 225 mm manholes 3 2 sightglass for laminated filter
4 2 400 mm manholes 4 2 135 mm sightglass
Note: Rodas filters with nozzle plates are not avaible.
Please enquire pricing for various options:

- Vinylester finish
- 225 mm and 400 mm manhole
- Sightglass
Head loss curve
1050 mm to 3000 mm filters

Head loss (m)
Filtration velocity (m3/h/m2)

COMMERCIAL POOL
EQUIPMENT
399
Filtration bed 1 m Laminated Filters
Vesubio filters
With sand discharge port of 21/2".
Maximum working pressure 2.5 Kg/cm2 Filtration bed 1 m
Diameter Filtration Standard Standard Standard

Outlet Flow Code
velocity Packaging Weight Kg Volume m3
mm m3/h
mm m3/h/m2
20 63 17 41304 1 90 870
1050 30/40 75 25/34 41305 1 90 870
50 90 43 41306 1 90 870
20/30 75 22/33 41307 1 105 1290
1200
40/50 90 45/56 41308 1 105 1290
20 75 30 41309 1 125 1810
1400 30 90 46 41310 1 125 1810
Available in 40/50 110 61/77 41311 1 125 1810
US customary units
20 90 40 41312 1 175 2285
1600 30/40 110 60/80 41313 1 175 2285
50 125 100 41314 1 175 2285
20 90 50 41315 1 210 2950
30 110 76 41316 1 210 2950
1800
40 125 101 41317 1 210 2950
50 140 125 41318 1 210 2950
20 110 62 41319 1 245 3850
30 125 94 41320 1 245 3850
2000
40 140 125 41321 1 245 3850
50 160 157 41322 1 245 3850 * Ca
** Ca
val
Pool Sand
Filtration Filtration Gravel
Connections Flow volume C A B D 0.4-0.8
D area 1-2 mm
velocity Code (8h) mm
(mm)
(m3/h/m2) mm inches (m3/h) (m3) (m2) (mm) (mm) (mm) (mm) (kg) (kg)
20 41304 63 2 17 136
1050 30/40 41305 75 21/2 25/34 200/272 0.86 1545 465 500 760 175 1125
50 41306 90 3 43 344
20/30 41307 75 21/2 22/33 176/264
1200 1.13 1730 675 500 850 275 1350
40/50 41308 90 3 45/56 360/448
20 41309 75 21/2 30 240
1400 30 41310 90 3 46 368 1.54 1845 725 500 1085 350 1850
40/50 41311 110 4 61/77 488/616
20 41312 90 3 40 320
1600 30/40 41313 110 4 60/80 480/640 2.01 1850 710 500 1230 450 2725
50 41314 125 41/2 100 800
20 41315 90 3 50 400
30 41316 110 4 76 608
1800 2.54 1915 755 570 1370 550 3175
40 41317 125 41/2 101 808
50 41318 140 5 125 1000
20 41319 110 4 62 496
30 41320 125 41/2 94 752
2000 3.14 2030 775 570 1560 675 3650
40 41321 140 5 125 1000
50 41322 160 6 157 1256
400
Filtration bed 1 m Bobbin wound filters
Europe filters
Polyester and fibreglass filters: complete fitted with pressure gauge panel, manual air relief valve and water
purge 200 sand discharge port. 400 mm top lid. Suitable for filtration velocities of 20, 30, 40 and 50
m3/h/m2. Please enquire for other velocities. All Europe filters can be fitted with valve manifold.
Maximum working pressure 2.5 Kg/cm2 Filtration bed 1 m

Outlet Flow Code
mm m3/h
mm m3/h/m2
20* 63 17 20070 1 125 2.823

1050 30/40** 75 25/34 20071 1 125 2.823
50 90 43 20072 1 125 2.823
20/30 75 22/33 20068 1 150 3.597
DOES NOT INCLUDE 1200
40/50 90 45/56 20069 1 150 3.597
VALVE MANIFOLD
20 75 30 21497 1 214 5.880
1400 30 90 46 21498 1 214 5.880
40/50 110 61/77 21499 1 214 5.880
* Can use a 2 multiport 20 90 40 21500 1 230 7.80
valve.
1600 30/40 110 60/80 21501 1 230 7.80
** Can use a 21/2 multiport
valve. 50 125 100 21502 1 230 7.80
20 90 50 21503 1 344 10.00
30 110 76 21504 1 344 10.00
1800
40 125 101 21505 1 344 10.00
Available in
US customary units 50 140 125 21506 1 344 10.00
20 110 62 21507 1 400 12.10
30 125 94 21508 1 400 12.10
2000
40 140 125 21509 1 400 12.10
an use a 2 multiport valve 50 160 157 21510 1 400 12.10
an use a 21/2 multiport
20 125 87 33820 1 600 15.70
lve.
30 140 130 33822 1 600 15.70
2350
40 160 174 33824 1 600 15.70
50 200 217 33826 1 600 15.70
20 140 100 34302 1 630 -
30 160 150 34303 1 630 -
2500
40 200 200 34304 1 630 -
50 225 225 34305 1 630 -
(mm) 1050 1200 1400 1600 1800 2000 2350 2500

400 mm
Filtration bed height (m) 1 1 1 1 1 1 1 1
H (mm) 1860 1860 2000 2100 2200 2200 2430 2525
B (mm) 270* 350 400 400 400 400 400 500
A (mm) 540 570 615 710 725 805 950 1015
P (mm) 760 850 1083 1230 1370 1558 1830 1830
200 mm E (mm) 170 180 240 250 270 300 355 -
sand dump port.
Filtration area (m2) 0.86 1.13 1.54 2.01 2.54 3.14 4.34 4.9
Volume (l) 1250 1575 2185 2965 3850 4850 7230 9385
Sand 0.4 0.8 mm (Kg) 1050 1360 1820 2375 3010 3750 5000 5600
Gravel 1 2 mm (Kg) 265 325 410 515 760 1060 2000 2920
Total weight in operation (Kg) 2060 2600 3500 4700 6150 7800 10786 13800
* For 2" multiport valve the height will be 230 mm.

COMMERCIAL POOL
EQUIPMENT
401
Filtration bed 1.2 m BOBBIN WOUND FILTERS
Europe filters
Maximum working pressure 2.5 Kg/cm2 Filtration bed 1.2 m

Outlet Flow Code
mm m3/h
mm m3/h/m2
20* 63 17 31857 1 140 3.04

1050 30/40** 75 25/34 31858 1 140 3.04
50 90 43 31859 1 140 3.04
20/30 75 22/33 31860 1 155 3.89
1200
40/50 90 45/56 31861 1 155 3.89
20 75 30 21511 1 215 6.27
1400 30 90 46 21512 1 215 6.27
DOES NOT INCLUDE
VALVE MANIFOLD 40/50 110 61/77 21513 1 215 6.27
20 90 40 21514 1 255 8.31
1600 30/40 110 60/80 21515 1 255 8.31
Available in
50 125 100 21516 1 255 8.31
US customary units
20 90 50 21517 1 385 10.65
30 110 76 21518 1 385 10.65
1800
40 125 101 21519 1 385 10.65
50 140 125 21520 1 385 10.65
20 110 62 21521 1 425 12.90
30 125 94 21522 1 425 12.90
2000
40 140 125 21523 1 425 12.90
50 160 157 21524 1 425 12.90
20 125 87 33821 1 630 16.80
30 140 130 33823 1 630 16.80
2350
40 160 174 33825 1 630 16.80
50 200 217 33827 1 630 16.80
20 140 100 34306 1 860 -
30 160 150 34307 1 860 -
2500
40 200 200 34308 1 860 -
50 225 225 34309 1 860 -
Filter
(mm) 1050 1200 1400 1600 1800 2000 2350 2500
Filtration bed height (m) 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 Lid 400 mm
H (mm) 2060 2060 2200 2300 2400 2400 2630 2675
B (mm) 270 350 400 400 400 400 400 500
A (mm) 540 570 615 710 725 805 950 1015
P (mm) 760 850 1085 1230 1370 1560 1830 1830
E (mm) 170 180 240 250 270 300 355 -
Connect.
Filtration area (m2) 0.86 1.13 1.54 2.01 2.54 3.14 4.34 4.90
Volume (l) 1500 1900 2650 3560 4620 5820 8060 -
Sand 0.4 0.8 mm (Kg) 1300 1660 2220 2950 3680 4600 6130 6680
Gravel 1 2 mm (Kg) 265 325 410 515 760 1060 2000 2920
Total weight in operation (Kg) 2375 2950 4000 5475 6950 8800 12180 14460
402
Vic filters
Industrial bobbin wound filters with diameters from 1050 mm to 3000 mm, with the corresponding flange con
nections for different filtration velocities. Replaces the Atenas model. New top cover system with quick closing
system 400 x 500 mm opening. The air relief valve is fitted into the cover in order to help eliminate air from
the filter. 1 collector arms injected in ABS at the necessary lengths for each of the filters and without joints.
Lenghts from 90 mm to 525 mm. A reduced head loss is achieved thanks to the greater diameter of the arms.
The 90 mm diam collector tubing is injected in PVC. Water purge and air relief are faster due to a 1" con
nection. The distance between the top sand layer and the difusor head (freeboard) has been increased to
ensure greates water distribution during filtration and to prevent sand entering into the laterals during the
backwashing.
In filters with diameters of 2350 mm, 2500 mm and 3000 mm, the top cover is 400 mm, sealed with bolts
for high resistance.

DOES NOT INCLUDE
VALVE MANIFOLD Diameter Filtration Standard Standard Standard
Outlet Flow Code
mm m3/h
mm m3/h/m2
FILTERS LARGER THAN 20 63 17 11511N 1 120 1.9

2500 mm AND ABOVE 1050 30-40 75 25-34 11517N 1 120 1.9
MAY REQUIRE SPECIAL
TRANSPORT VEHICLES. 50 90 43 11526N 1 120 1.9
PLEASE ASK FOR A 20-30 75 22-33 11512N 1 154 2.7
QUOTATION AT THE TIME 1200
OF YOUR ENQUIRY. 40-50 90 45-56 11522N 1 154 2.7
20 75 30 11513N 1 173 3.7
1400 30 90 46 11518N 1 173 3.7
The lateral manholes
( 400 mm or 225 m) 40-50 110 61-77 11523N 1 173 3.7
are recommended for fil 20 90 40 11514N 1 235 5.0
ters with nozzle collector
plates for emptying of filter 1600 30-40 110 60-80 11519N 1 235 5.0
media. 50 125 100 11527N 1 235 5.0
20 90 50 11515N 1 270 6.4
Available in 30 110 76 11520N 1 270 6.4
US customary units 1800
40 125 101 11524N 1 270 6.4
50 140 125 11528N 1 270 6.4
20 110 62 11516N 1 295 8.7
30 125 94 11521N 1 295 8.7
2000
40 140 125 11525N 1 295 8.7
50 160 157 11529N 1 295 8.7
20 125 87 33039 1 530 14.8
30 140 130 33040 1 530 14.8
2350
40 160 175 33041 1 530 14.8
Filter base 50 200 217 33042 1 530 14.8
20 140 100 33043 1 780 19.5
30 160 150 33044 1 780 19.5
2500
40 200 200 33045 1 780 19.5
50 225 250 33046 1 780 19.5
20 160 140 33047 1 1350 29.0
30 200 212 33048 1 1350 29.0
3000
40 225 282 33049 1 1350 29.0
50 250 353 33050 1 1350 29.0

COMMERCIAL POOL
Collector arms
EQUIPMENT
403
Filtration bed 1 m BOBBIN WOUND FILTERS
Vic filters
Filtration
Code Filter A B C H P
Connection surface
2.5 Kg mm mm mm mm mm mm
mm m
11511N 1050 685 85 535 1950 760 63 0.86

11517N 1050 685 85 535 1950 760 75 0.86
11526N 1050 685 85 535 1950 760 90 0.86
11512N 1200 680 85 530 1970 860 75 1.13
11522N 1200 680 85 530 1970 860 90 1.13
11513N 1400 685 85 575 2000 1020 75 1.54
11518N 1400 685 85 575 2000 1020 90 1.54
11523N 1400 685 85 575 2000 1020 110 1.54
11514N 1600 695 85 625 2050 1150 90 2.01
DOES NOT INCLUDE 11519N 1600 695 85 625 2050 1150 110 2.01
VALVE MANIFOLD
11527N 1600 695 85 625 2050 1150 125 2.01
11515N 1800 710 85 670 2080 1320 90 2.54
11520N 1800 710 85 670 2080 1320 110 2.54
FILTERS LARGER THAN
11524N 1800 710 85 670 2080 1320 125 2.54
2500 mm AND ABOVE
MAY REQUIRE SPECIAL 11528N 1800 710 85 670 2080 1320 140 2.54
TRANSPORT VEHICLES. 11516N 2000 730 85 715 2150 1470 110 3.14
PLEASE ASK FOR A 11521N 2000 730 85 715 2150 1470 125 3.14
QUOTATION AT THE TIME 11525N 2000 730 85 715 2150 1470 140 3.14
OF YOUR ENQUIRY.
11529N 2000 730 85 715 2150 1470 160 3.14
33039 2350 965 85 1030 2520 1860 125 4.34
33040 2350 965 85 1030 2520 1860 140 4.34
The lateral manholes
( 400 mm or 225 m) 33041 2350 965 85 1030 2520 1860 160 4.34
are recommended for fil 33042 2350 965 150 1030 2520 1860 200 4.34
ters with nozzle collector 33043 2500 1050 85 1080 2550 2000 140 4.90
plates for emptying of filter 33044 2500 1050 85 1080 2550 2000 160 4.90
media.
33045 2500 1050 150 1080 2550 2000 200 4.90
33046 2500 1050 150 1080 2550 2000 225 4.90
33047 3000 1175 85 1140 2750 2365 160 7.07
Available in
US customary units 33048 3000 1175 150 1140 2750 2365 200 7.07
33049 3000 1175 150 1140 2750 2365 225 7.07
33050 3000 1175 170 1140 2750 2365 250 7.07
Filter base
Collector arms
404
Praga filters
Single layer filter in polyester and fibreglass. Lid 400 mm. Supplied with manual air relief valve and water
purge, sand dump port, and pressure gauge panel. Valid for 20, 30 and 40 m3/h/m2 filtration velocities. For
other filtration velocities, please enquire.

Outlet Flow Code
mm m3/h
mm m3/h/m2
20 63 17 00687 1 120 1.9

1050 30-40 75 25-34 00694 1 120 1.9
- 90 - 00707 1 120 1.9
DOES NOT INCLUDE
20-30 75 22-33 00688 1 154 2.7
VALVE MANIFOLD 1200
40 90 45 00702 1 154 2.7
20 75 30 00689 1 173 3.7
ALTERNATIVE HEIGHTS 1400 30 90 46 00696 1 173 3.7
AVAILABLE UNDER
SPECIAL ORDER. 40 110 61 00703 1 173 3.7
20 90 40 00690 1 235 5.0
1600 30-40 110 60-80 00697 1 235 5.0
FILTERS OF 3000 mm - 125 - 00710 1 235 5.0
MAY REQUIRE SPECIAL
TRANSPORT VEHICLES. 20 90 50 00691 1 270 6.4
PLEASE ASK FOR A 30 110 76 00698 1 270 6.4
QUOTATION AT THE TIME 1800
OF YOUR ENQUIRY. 40 125 101 00705 1 270 6.4
- 140 - 00711 1 270 6.4
20 110 62 00692 1 295 8.7
The lateral manholes 30 125 94 00699 1 295 8.7
( 400 mm or 225 m) 2000
are recommended for fil 40 140 125 00706 1 295 8.7
ters with nozzle collector - 160 - 05083 1 295 8.7
plates for emptying of filter
media. 30 140 114 56937 1 412 13.9
New 2200
40 160 152 56938 1 412 13.9
20 125 87 00693 1 530 14.8
Available in
2350 30 140 130 00700 1 530 14.8
US customary units
40 160 175 04935 1 530 14.8
20 140 100 08695 1 780 19.5
2500 30 160 150 08696 1 780 19.5
40 200 200 08697 1 780 19.5
20 160 140 08699 1 1350 29.0
3000 30 200 212 08700 1 1350 29.0
40 225 282 08701 1 1350 29.0

COMMERCIAL POOL
EQUIPMENT
405
Praga filters
Lid 400 mm.
Maximum working pressure 4 Kg/cm2

Outlet Flow Code
mm m3/h
mm m3/h/m2
20 63 17 09209 1 142 1.9

1050 30-40 75 25-34 00712 1 142 1.9
- 90 - 00724 1 142 1.9
20-30 75 22-33 00713 1 169 2.7
1200
DOES NOT INCLUDE 40 90 45 00719 1 169 2.7
VALVE MANIFOLD 20 75 30 09210 1 192 3.7
1400 30 90 46 00714 1 192 3.7
40 110 61 00720 1 192 3.7
ALTERNATIVE HEIGHTS
AVAILABLE UNDER 20 90 40 09211 1 250 5.0
SPECIAL ORDER. 1600 30-40 110 60-80 00715 1 250 5.0
- 125 - 00727 1 250 5.0
20 90 50 09212 1 300 6.4
FILTERS OF 3000 mm 30 110 76 00716 1 300 6.4
MAY REQUIRE SPECIAL 1800
TRANSPORT VEHICLES. 40 125 101 00722 1 300 6.4
PLEASE ASK FOR A - 140 - 00728 1 300 6.4
QUOTATION AT THE TIME 20 110 62 09213 1 350 8.7
OF YOUR ENQUIRY.
30 125 94 00717 1 350 8.7
2000
40 140 125 00723 1 350 8.7
Available in - 160 - 05132 1 350 8.7
2200
40 160 152 57813 1 440 13.9
New 20 125 87 09214 1 530 14.8
2350 30 140 130 09217 1 530 14.8
40 160 175 09220 1 530 14.8
20 140 100 09215 1 960 19.5
2500 30 160 150 09218 1 960 19.5
40 200 200 09221 1 960 19.5
20 160 140 09216 1 1600 29.0
3000 30 200 212 09219 1 1600 29.0
40 225 282 09222 1 1600 29.0
(mm) 1050 1200 1400 1600 1800 2000 2200 2350 2500 3000
400 Filtration bed height (m) 1 1 1 1 1 1 1 1 1 1
H (mm) 1640 1780 1755 1835 1875 2040 2440 2520 2550 2750
B (mm) 200 230 240 260 280 300 340 340 340 350
A (mm) 540 570 585 680 720 790 950 965 1080 1100
C (mm) 645 640 610 515 465 510 510 600 450 440
P (mm) 755 940 1085 1230 1370 1550 1830 1859 2000 2365
E (mm) 90 90 90 140 140 140 140 140 140 140
Filtration area (m2) 0.86 1.13 1.54 2.01 2.54 3.14 3.80 4.34 4.90 7.07
Volume (l) 1050 1500 2000 2600 3400 4400 6520 8045 9050 12800
Sand 0.4 0.8 mm (Kg) 950 1375 1650 2150 2800 3800 4650 5275 5950 8600
Gravel 1 2 mm (Kg) 300 300 450 675 750 1050 1900 1800 2200 3300
Total weight in operation (Kg) 2000 2700 3700 4900 6100 7900 11200 12550 13760 20200
406
THIS CHART APPLIES ONLY

TO HIGH PERFORMANCE
BOBBIN WOUND FILTERS
OSLO, OLOT AND AMPURIA
Vertical high performance bobbin wound filters

General features:
- 100% resistant to corrosion unlike conventional steel filters
- Maximum operating temperature 50 C
- Comply with European standards for pressure vessels 97/23/CE included in section 3 of article 3
- Hydraulic pressure test 1.5 times the maximum admissible pressure
Technical features of internal components:

- Internal components and pipe in PVC
- Laterals and nozzles in PP
- Airwash connection in models with underdrain nozzle plates
Oslo
- Bolts, nuts and washers in AISI-316
- EPDM seals and gaskets.
Advantages of using an underdrain nozzle plate system over the conventional lateral system:
- There are no areas beneath the nozzles for water to stagnate as could occur in a lateral system
- Optimum filter bed back wash with an uniform water distribution
- Possibility of air wash with consequent saving of clean water
- The lateral manhole is recommended for sand discharge
The characteristics of liquids to be filtered should be indicated clearly when

requesting ozone or other chemical resistant coatings for the filter interior.
Olot
DOES NOT INCLUDE

VALVE MANIFOLD
MEDIA RECOMMENDATIONS:
MULTILAYER - Nozzle plate - Filtration bed 1.2 m
Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000
Hydroanthracite (0.8-1.6) Kg 600 mm 450 575 775 1000 1275 1575 2175 2450 2548 2956 3550
Sand (0.4-0.8) Kg 400 mm 475 625 825 1100 1400 1700 2350 2675 2973 3448 3850
Gravel (1-2) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100
Gravel (3-5) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100
MULTILAYER - Nozzle plate - Filtration bed 1.5 m
Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000
Sand (0.4-0.8) Kg 600 mm 725 950 1250 1650 2100 2550 3525 4025 4460 5172 5775
Gravel (1-2) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100
Gravel (2-3) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100
Gravel (3-5) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100
SINGLELAYER - Nozzle plate - Filtration bed 1.2 m
Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000
Sand (0.4-0.8) Kg 1100 mm 1300 1775 2300 3000 3800 4650 6300 7075 8176 9483 10575
Gravel (1-2) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100
SINGLELAYER - Nozzle plate - Filtration bed 1.5 m
Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000
Sand (0.4-0.8) Kg 1200 mm 1450 1900 2500 3300 4200 5100 7050 8050 8920 10345 11550
Gravel (1-2) Kg 100 mm 150 175 250 300 400 500 675 775 7964 9236 1100
Gravel (2-3) Kg 100 mm 150 175 250 300 400 500 675 775 7964 9236 1100
Gravel (3-5) Kg 100 mm 150 175 250 300 400 500 675 775 7964 9236 1100
MULTILAYER - Collector arms - Filtration bed 1.2 m
Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000
Sand (0.4-0.8) Kg 400 mm 475 625 825 1100 1400 1700 2350 2675 2973 3448 3850
Gravel (2-3) Kg 100 mm 150 175 250 300 400 500 675 775 796 924 1100
Gravel (3-5) Kg 100 mm (1) 300 350 500 775 850 1150 1800 1975 2123 2463 3850
SINGLELAYER - Collector arms - Filtration bed 1.2 m
Diameter mm 1050 1200 1400 1600 1800 2000 2350 2500 2600 2800 3000
Sand (0.4-0.8) Kg 1100 mm 1300 1775 2300 3000 3800 4650 6300 7075 8176 9483 10575
Gravel (1-2) Kg 100 mm (1) 300 350 500 775 850 1150 1800 1975 2123 2463 3850
Densities: Hydroanthracite = 0.8 Kg/dm3 - Sand = 1.4 Kg/dm3 - Gravel = 1.5 Kg/dm3
(1) 100 mm above laterals
COMMERCIAL POOL
EQUIPMENT
407
Oslo filters
Features:
Vertical high performance bobbin wound filters
Collector system:
A - Conventional collector system using laterals with 0.3 mm slots
For working pressure of 2.5 and 4 bars.
B - Nozzle plate with 0.5 mm slots. For working pressure of 2.5 and 4 bars.
Fitted with:
- Pressure gauge panel
- Manual air vent and water purge
Options:
- Positioning of water connections flanges, sightglasses and manhole covers are provided according to customer
DOES NOT INCLUDE specification.
VALVE MANIFOLD - Diameters of connections and purges depend on customer specifications
- For other variations such as height, chemical resistant internal coating, pressure rating, etc., please enquire.
ALTERNATIVE HEIGHTS
AVAILABLE UNDER
SPECIAL ORDER.

FILTERS OF 3000 mm velocity
Outlet Flow Code
MAY REQUIRE SPECIAL mm m3/h Packaging Weight Kg Volume m3
mm m3/h/m2
TRANSPORT VEHICLES.
PLEASE ASK FOR A 30 75 25 04611 1 207 2.5
1050
OF YOUR ENQUIRY.
30 75 33 04613 1 234 3.2
1200
40 110 45 04650 1 234 3.2
Available in 30 90 46 04615 1 294 4.7
US customary units 1400
40 125 61 04616 1 294 4.7
30 110 60 04619 1 360 6.2
1600
40 140 80 04651 1 360 6.2
30 125 76 04623 1 416 8.5
1800
40 160 101 04624 1 416 8.5
30 125 94 04626 1 483 10.3
2000
40 160 125 04652 1 483 10.3
30 140 114 56935 1 567 14.8
New 2200
Lateral manhole 400 mm 40 160 152 56936 1 567 14.8
30 140 130 08693 1 651 15.8
2350
40 200 175 08694 1 651 15.8
30 160 150 08704 1 820 20.8
2500
40 225 200 08706 1 820 20.8
30 200 212 08708 1 1300 31.0
3000
40 250 282 08710 1 1300 31.0
Nozzle plate
Sightglass
408
Oslo filters
Maximum working pressure 4 Kg/cm2

Outlet Flow Code
mm m3/h
mm m3/h/m2
30 75 25 05168 1 230 2.5

1050
40 90 34 05173 1 230 2.5
30 75 33 05169 1 265 3.2
1200
40 110 45 05174 1 265 3.2
30 90 46 07436 1 364 4.7
FILTERS LARGER THAN 1400
2500 mm AND ABOVE 40 125 61 07437 1 364 4.7
MAY REQUIRE SPECIAL 30 110 60 05170 1 442 6.2
TRANSPORT VEHICLES. 1600
PLEASE ASK FOR A 40 140 80 05175 1 442 6.2
OF YOUR ENQUIRY. 1800
40 160 101 07439 1 518 8.5
30 125 94 05171 1 644 10.3
2000
The lateral manholes 40 160 125 05176 1 644 10.3
( 400 mm or 225 m) 30 140 114 57810 1 715 14.8
are recommended for fil New 2200
40 160 152 57810 1 715 14.8
ters with nozzle collector
plates for emptying of filter 30 140 130 05172 1 786 15.8
media. 2350
40 200 175 05177 1 786 15.8
30 160 150 08712 1 964 20.8
2500
Available in 40 225 200 08714 1 964 20.8
3000
40 250 282 08718 1 1613 31.0

COMMERCIAL POOL
EQUIPMENT
409
Oslo filters
Oslo With laterals Oslo with nozzle plate
2.5 bar 4 bar Total

Volume (l)
Flow m3/h
Filtration
(m3/h/m2)
Filtration
area m2
velocity
D A B C F H L P R S T W weight
N (mm)
(mm) Code Code (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) in oper.
Kg
30 75 DN65 04611 05168 25
1050 0.86 1500 650 940 770 1550 2070 1240 750 55 90 1220 325 2450
40 90 DN80 04612 05173 34
30 75 DN65 04613 05169 33
1200 1.13 1860 670 830 770 1550 2080 1390 940 45 90 1380 350 3000
40 110 DN100 04650 05174 45
30 90 DN80 04615 07436 46
1400 1.54 2700 680 820 840 1570 2175 1590 1085 45 90 1570 350 4300
40 125 DN110 04616 07437 61
30 110 DN100 04619 05170 60
1600 2.01 3620 780 800 870 1625 2310 1790 1230 45 140 1780 400 5825
40 140 DN125 04651 05175 80
30 125 DN110 04623 07438 76
1800 2.54 4725 790 780 950 1625 2320 1990 1370 45 140 2000 400 7300
40 160 DN150 04624 07439 101
30 125 DN110 04626 05171 94
2000 3.14 5800 790 840 950 1695 2460 2190 1550 45 140 2200 400 9000
40 160 DN150 04652 05176 125
30 140 DN125 56935 57810 114
2200 3.80 7080 960 510 - - 2390 - 1830 - 140 - - 12500
40 160 DN150 56936 57811 152
30 140 DN125 08693 05172 130
2350 4.34 8800 1065 700 1130 1850 2720 2550 1830 45 140 2550 500 13750
40 200 DN175 08694 05177 175
30 160 DN150 08704 08712 150
2500 4.90 9850 1125 450 1080 1760 2750 2700 2000 45 140 2750 500 14885
40 225 DN200 08706 08714 200
30 200 DN175 08708 08716 212
3000 7.07 15350 1150 600 1140 1870 2950 3200 2365 45 140 3200 500 21615
40 250 DN225 08710 08718 282
410
Filtration bed 1.2 BOBBIN WOUND FILTERS

and 1.5 m
Olot filters
Features: According to DIN 19605/19643 Standard
Collector system:
Nozzle plate with 0.5 mm slots, working pressure 2.5 bar.
Fitted with:
- Manual air vent and water purge
- Air wash connection flange
- 400 mm manhole
Options:
- Positioning of water connection flanges, sightglasses and manhole covers are provided according to
customer specifications.
DOES NOT INCLUDE - Diameters of connections and purges depend on customer specifications.
VALVE MANIFOLD - Please enquire for the variations such as height, chemical resistant internal coating, pressure rating, etc.
Maximum working pressure 2.5 Kg/cm2 Filtration bed 1.2 m

FILTERS OF 3000 mm
MAY REQUIRE SPECIAL Diameter Filtration Standard Standard Standard
Outlet Flow Code
TRANSPORT VEHICLES. velocity
mm m3/h Packaging Weight Kg Volume m3
PLEASE ASK FOR A mm m3/h/m2
QUOTATION AT THE TIME 1050 30 110 25 07355 1 265 2.95
OF YOUR ENQUIRY.
1200 30 125 33 07356 1 345 3.86
1400 30 140 46 07447 1 380 5.22
1600 30 160 60 07357 1 420 7.09
Available in
US customary units 1800 30 200 76 07448 1 470 9.09
2000 30 225 94 07358 1 540 11.25
New 2200 30 225 114 56934 1 - 15.34
2350 30 250 130 07359 1 825 16.20
2500 30 250 150 19335 1 940 24.40
2600 30 250 160 23969 1 1021 25.21
2800 30 250 185 23970 1 1135 29.50
3000 30 250 212 19336 1 1425 30.00
Filtration bed 1.5 m

Outlet Flow Code
mm m3/h
mm m3/h/m2
1050 30 110 25 18227 1 285 3.21

1200 30 125 33 18228 1 385 4.20
1400 30 140 46 18229 1 420 5.68
1600 30 160 60 18230 1 460 7.69
1800 30 200 76 18231 1 515 9.58
2000 30 225 94 18232 1 625 12.90
2350 30 250 130 18233 1 920 17.50
2500 30 250 150 19337 1 1010 25.87
2600 30 250 160 23971 1 1144 26.51
2800 30 250 185 23972 1 1264 30.63
3000 30 250 212 19338 1 1590 32.12

COMMERCIAL POOL
EQUIPMENT
411
Olot filters
D (mm) 1050 1200 1400 1600 1800 2000 2200 2350 2500 2600 2800 3000
Filtration velocity (m /h/m )3 2
30 30 30 30 30 30 30 30 30 30 30 30
K (mm) 110 125 140 160 200 225 225 250 250 250 250 250
DN100 DN110 DN125 DN150 DN175 DN200 DN200 DN225 DN225 DN225 DN225 DN225
Code 07355 07356 07447 07357 07448 07358 56934 07359 19335 23969 23970 19336
FILTRATION BED
H (mm) 2380 2400 2420 2520 2570 2660 2690 2800 2850 2920 3030 2900
1.2 m
F (mm) 1615 1635 1645 1690 1740 1750 1800 1870 1870 1880 1920 1880
Vol. (l) 1735 2175 3000 4350 5450 6650 7930 9575 11700 12800 15500 18000
Total weight in operation (kg) 2600 3325 4475 6250 7500 9625 11815 13600 15500 16650 19500 22500
Code 18227 18228 18229 18230 18231 18232 - 18233 19337 23971 23972 19338
FILTRATION BED
H (mm) 2680 2700 2720 2820 2870 2960 - 3100 3150 3220 3330 3200
1.5 m
F (mm) 1915 1935 1945 1990 2040 2050 - 2170 2170 2180 2220 2180
Vol (l) 1995 2745 3590 5150 6350 7650 - 11255 12950 14100 16900 19700
Total weight in operation (kg) 3000 3900 5300 7150 8750 11250 - 15800 17950 19400 22600 26250
Flow rate (m3/h) 25 33 46 60 76 94 114 130 150 160 185 212
Filtration area (m2) 0.86 1.13 1.54 2.01 2.54 3.14 3.80 4.34 4.90 5.31 6.16 7.07
Nozzle number 59 78 102 134 168 200 200 286 333 333 381 433
A (mm) 700 700 830 830 900 950 928 1050 1100 1160 1230 1140
B (mm) 1000 1000 900 950 920 760 900 680 600 600 650 600
C (mm) 830 840 840 870 950 950 1040 1130 1100 1200 1230 1220
L (mm) 1240 1390 1600 1810 1990 2194 2425 2550 2720 2800 3000 3220
P (mm) 730 940 1080 1230 1390 1550 1830 1850 2050 2050 2200 2360
T (mm) 1220 1380 1570 1780 2000 2240 2450 2630 2750 2800 3000 3270
N (mm) 0 130 130 400 450 480 520 550 700 600 600 720
X Inspection lid (mm) 125 250 250 250 250 250 250 250 250 250 250 250
R 55 45 45 45 45 45 45 45 45 45 45 45
J (mm) 380 380 380 380 380 380 380 600 600 600 600 600
G1 2 2 2 2 75 75 75 75 75 90 110 140
G2* 2 2 2 2 2 2 75 75 75 75 75 75
* In models 1050 mm, 1200 mm and 1400 mm, this fitting is fitted on to the cover.
412
Construction features of the filter according to DIN 18820:

- (1) Chemical protective gel-coat barrier isoneopenliglical type CSS-UP3.
Superior hardness and resistance to the abrasion of sand and salt water. Complies with German standard
KTW recommendations and certified by LVHT. The optional vinylester layer for protection against ozone is
of the CCS-PHAS class.
- (2) Polyester reinforced laminated resin with randomly orientated fibreglass filament GF-UP1type.
- Reinforced in MW areas under greater stress with an additional woven matting, alternating non-aligned (4)
with aligned fibres (3).
- Bobbin wound layers using computer controlled machinery that lay down a set of radial bobbin layers (5)
(7) on the cylindrical part and a set of polar layers (6) along the entire filter body with type GF-UP1. The
most essential features of these filters is their great mechanical resistance that enables them to withstand
greater internal pressures.
- All filters are submitted to a seasoning process at a temperature of 60C.
1050 mm and 1200 mm Rodas filters

General features:
- Resistant to corrosion unlike conventional steel filters
- Excellent relation between filter weight and its mechanical characteristics
- Maximum operating temperature 50C
- Comply with European standards for pressure vessels 97/23/CE included in section 3 of article 3.
- Resistance and thickness calculations are based on norms BS-4994 and AD Merkblatt N1
Fitted with:
- Manual air relief valve and water drain
- 400 mm lateral manhole and 140 mm top port
1050 mm Characteristics of internal components:
1200 mm - Internal components and pipe in PVC
- PP laterals with 0.3 slots
- EPDM seals and gaskets
COMMERCIAL POOL
EQUIPMENT
413
Maximum working pressure 2.5 Kg/cm2 Filters 1050 mm
Filter Filtration Standard Standard Standard

Outlet Flow Code
length velttcity Packaging Weight Kg Volume m3
mm m3/h
mm m3/h/m2
20 75 34 05102 1 230 2.95

1900 30 90 52 05105 1 230 2.95
40 110 69 05108 1 230 2.95
20 110 42 11331 1 280 3.57
1050 mm
2300 30 125 64 11332 1 280 3.57
1200 mm
40 140 85 11333 1 280 3.57
20 110 46 24842 1 305 3.88
2500 30 125 70 24843 1 305 3.88
40 140 93 24844 1 305 3.88
20 110 50 11334 1 330 4.20
2700 30 125 75 11335 1 330 4.20
40 140 100 11336 1 330 4.20
20 110 56 22647 1 370 4.67
3000 30 140 84 22648 1 370 4.67
40 160 112 22649 1 370 4.67
Filters 1200 mm

Outlet Flow Code
length velocity Packaging Weight Kg Volume m3
mm m3/h
mm m3/h/m2
20 110 39 22650 1 270 3.08

1900 30 125 59 22651 1 270 3.08
40 140 79 22652 1 270 3.08
20 110 48 22653 1 330 3.73
2300 30 140 73 22654 1 330 3.73
40 160 97 22655 1 330 3.73
20 125 53 24845 1 360 4.05
2500 30 140 79 24846 1 360 4.05
40 160 106 24847 1 360 4.05
20 125 57 22656 1 390 4.38
2700 30 140 86 22657 1 390 4.38
40 160 115 22658 1 390 4.38
20 125 64 22659 1 435 4.86
3000 30 140 96 22660 1 435 4.86
40 160 129 22661 1 435 4.86
414
Maximum working pressure 4 Kg/cm2 Filters 1050 mm

Outlet Flow Code
mm m3/h
mm m3/h/m2
20 75 34 07124 1 270 2.95

1900 30 90 52 07125 1 270 2.95
40 110 69 07126 1 270 2.95
20 110 42 11321 1 330 3.57
1050 mm
2300 30 125 64 11322 1 330 3.57
1200 mm
40 140 85 11323 1 330 3.57
20 110 46 25016 1 355 3.88
2500 30 125 70 25017 1 355 3.88
40 140 93 25018 1 355 3.88
20 110 50 11326 1 380 4.20
2700 30 125 75 11327 1 380 4.20
40 140 100 11328 1 380 4.20
20 110 56 22683 1 420 4.67
3000 30 140 84 22684 1 420 4.67
40 160 112 20895 1 420 4.67
Filters 1200 mm

Outlet Flow Code
mm m3/h
mm m3/h/m2
20 110 39 22685 1 310 3.08

1900 30 125 59 22686 1 310 3.08
40 140 79 22687 1 310 3.08
20 110 48 22688 1 375 3.73
2300 30 140 73 22689 1 375 3.73
40 160 97 20897 1 375 3.73
20 125 53 25019 1 410 4.05
2500 30 140 79 25020 1 410 4.05
40 160 106 25021 1 410 4.05
20 125 57 22690 1 440 4.38
2700 30 140 86 22691 1 440 4.38
40 160 115 20898 1 440 4.38
20 125 64 22692 1 480 4.86
3000 30 140 96 22693 1 480 4.86
40 160 129 20899 1 480 4.86
COMMERCIAL POOL
EQUIPMENT
415
2.5 bar 4 bar Total Sand charge

Volume (l)
Flow m3/h
Filtration
(m3/h/m2)
Filtration
area m2
velocity
Length A B C E F H I P T W weight Granulometry

N (mm)
(mm) Code Code (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) in opert. 1 - 1.2 0.4 - 0.8
Kg mm mm
Diameter 1050 mm - Height of filtration bed 0.6 m
20 75 DN65 05102 07124 34
1900 30 90 DN80 05105 07125 52 1.72 1480 630 325 760 380 190 1260 950 800 2160 170 2530 350 950
40 110 DN100 05108 07126 69
20 110 DN100 11331 11321 42
2300 30 125 DN110 11332 11322 64 2.12 1820 630 325 1000 460 190 1260 1150 800 2560 170 3100 475 1250
40 140 DN125 11333 11323 85
20 110 DN100 24842 25016 46
2500 30 125 DN110 24843 25017 70 2.32 2000 630 325 1120 500 190 1260 1250 800 2760 170 3380 575 1525
40 140 DN125 24844 25018 93
20 110 DN100 11334 11326 50
2700 30 125 DN110 11335 11327 75 2.51 2170 630 325 1240 540 190 1260 1350 800 2960 170 3670 700 1800
40 140 DN125 11336 11328 100
20 110 DN100 22647 22683 56
3000 30 140 DN125 22648 22684 84 2.81 2430 630 325 1420 600 190 1260 1500 800 3260 170 4100 775 20250
40 160 DN150 22649 20895 112
Diameter 1200 mm - Height of filtration bed 0.6 m
20 75 DN100 22650 22685 39
1900 30 90 DN110 22651 22686 59 1.96 1900 725 325 760 380 200 1390 950 900 2130 225 3220 425 1100
40 110 DN125 22652 22687 79
20 110 DN100 22653 22688 48
2300 30 125 DN125 22654 22689 73 2.42 2350 725 325 1000 460 200 1390 1150 900 2530 225 3960 550 1425
40 140 DN150 22655 20897 97
20 110 DN110 24845 25019 53
2500 30 125 DN125 24846 25020 79 2.65 2580 725 325 1120 500 200 1390 1250 900 2750 225 4320 700 1750
40 140 DN150 24847 25021 106
20 110 DN110 22656 22690 57
2700 30 125 DN125 22657 22691 86 2.87 2800 725 325 1240 540 200 1390 1350 900 2950 225 4690 825 2075
40 140 DN150 22658 20898 115
20 110 DN110 22659 22692 64
3000 30 140 DN125 22660 22693 96 3.21 3140 725 325 1420 600 200 1390 1500 900 3250 225 5240 925 2325
40 160 DN150 22661 20899 129
Media recommendations - Sand = 1.4 Kg/dm3 - Gravel = 1.5 Kg/dm3
416

and 1 m

General features:
Fitted with:
- Manual air relief valve and water purge
- 400 mm lateral manhole
Characteristics of internal components:
DOES NOT INCLUDE - Internal components and pipe in PVC
VALVE MANIFOLD - PP laterals with 0.3 mm slots
1400 mm
1600 mm
1800 mm
Maximum working pressure 2.5 Kg/cm2 Filters 1400 mm - Filtration bed 0.8 m
Available in
US customary units Filter Filtration Standard Standard Standard
Outlet Flow Code
mm m3/h
mm m3/h/m2
20 110 45 24848 1 340 4.84

1900 30 125 67 24849 1 340 4.84
40 140 89 24850 1 340 4.84
20 110 60 24854 1 435 6.23
2500 30 140 91 24855 1 435 6.23
40 160 121 24856 1 435 6.23
20 125 73 24860 1 530 7.44
3000 30 160 110 24861 1 530 7.44
40 200 147 24862 1 530 7.44
FFilters 1600 mm - Filtration bed 1 m

Outlet Flow Code
mm m3/h
mm m3/h/m2
20 110 49 22662 1 400 5.49

1900 30 140 74 22663 1 400 5.49
40 160 99 22664 1 400 5.49
20 140 67 24866 1 520 7.18
2500 30 160 101 24867 1 520 7.18
40 200 134 24868 1 520 7.18
20 140 82 22671 1 620 8.60
3000 30 160 123 22672 1 620 8.60
40 200 164 22673 1 620 8.60
COMMERCIAL POOL
EQUIPMENT
417

and 1 m
1400 mm, 1600 mm and 1800 mm Rodas filters
Maximum working pressure 2.5 Kg/cm2 Filters 1800 mm - Filtration bed 1 m

Outlet Flow Code
mm m3/h
mm m3/h/m2
20 125 75 24875 1 585 10.40

2500 30 160 112 24876 1 585 10.40
DOES NOT INCLUDE 40 200 150 24877 1 585 10.40
VALVE MANIFOLD
20 140 92 24881 1 700 12.25
3000 30 160 137 24882 1 700 12.25
1400 mm 40 200 183 24883 1 700 12.25
1600 mm 20 140 108 24887 1 875 14.20
1800 mm 3500 30 200 162 24888 1 875 14.20
40 225 216 24889 1 875 14.20
Available in 20 160 125 24893 1 930 16.00
40 225 250 24895 1 930 16.00
Maximum working pressure 4 Kg/cm2 Filters 1400 mm - Filtration bed 0.8 m

Outlet Flow Code
mm m3/h
mm m3/h/m2
20 110 45 25022 1 385 4.84

1900 30 125 67 25023 1 385 4.84
40 140 89 25024 1 385 4.84
20 110 60 25028 1 485 6.23
2500 30 140 91 25029 1 485 6.23
40 160 121 25030 1 485 6.23
20 125 73 25034 1 585 7.44
3000 30 160 110 25035 1 585 7.44
40 200 147 25036 1 585 7.44
418

and 1 m
Maximum working pressure 4 Kg/cm2 Filters 1600 mm - Filtration bed 1 m

Outlet Flow Code
mm m3/h
mm m3/h/m2
20 110 49 22694 1 450 5.49

1900 30 140 74 22695 1 450 5.49
40 160 99 20900 1 450 5.49
DOES NOT INCLUDE
VALVE MANIFOLD 20 140 67 25040 1 570 7.18
2500 30 160 101 25041 1 570 7.18
40 200 134 25042 1 570 7.18
1400 mm
20 140 82 22700 1 685 8.60
1600 mm
3000 30 160 123 22701 1 685 8.60
1800 mm
40 200 164 20903 1 685 8.60
Available in
US customary units
Filters 1800 mm - Filtration bed 1 m

Outlet Flow Code
mm m3/h
mm m3/h/m2
20 125 75 25049 1 680 10.40

2500 30 160 112 25050 1 680 10.40
40 200 150 25051 1 680 10.40
20 140 92 25055 1 805 12.25
3000 30 160 137 25056 1 805 12.25
40 200 183 25057 1 805 12.25
20 140 108 25061 1 930 14.20
3500 30 200 162 25062 1 930 14.20
40 225 216 25063 1 930 14.20
20 160 125 25067 1 1055 16.00
4000 30 200 187 25068 1 1055 16.00
40 225 250 25069 1 1055 16.00
COMMERCIAL POOL
EQUIPMENT
419

Volume (l)
Flow m3/h
(m3/h/m2)
Filtration
Filtration
velocity
area m2
Length A B C E F H I P T W Y weight Granulometry

N (mm)
(mm) Code Code (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) in oper. 1 - 1.2 0.4 - 0.8
Kg mm mm
Diameter 1400 mm - Filtration bed 0.8 m.
20 110 DN100 24848 25022 45
1900 30 125 DN110 24849 25023 67 2.23 2530 810 390 720 380 210 1600 820 1080 2160 220 1380 4250 575 2100
40 140 DN125 24850 25024 89
20 110 DN100 24854 25028 60
2500 30 140 DN125 24855 25029 91 3.02 3460 810 390 1080 500 210 1600 820 1080 2780 220 1380 5740 800 2825
40 160 DN150 24856 25030 121
20 125 DN110 24860 25034 73
3000 30 160 DN150 24861 25035 110 3.67 4230 810 390 1380 600 210 1600 820 1080 3320 220 1380 6990 1000 3450
40 200 DN175 24862 25036 147
Diameter 1600 mm - Filtration bed 1 m.
20 110 DN100 22662 22694 49
1900 30 140 DN125 22663 22695 74 2.47 3220 925 475 470 475 240 1830 800 1230 2220 250 1380 5420 600 2850
40 160 DN150 22664 20900 99
20 140 DN125 24866 25040 67
2500 30 160 DN150 24867 25041 101 3.36 4430 925 475 1020 500 240 1830 800 1230 2820 250 1380 7400 850 3875
40 200 DN175 24868 25042 134
20 140 DN125 22671 22700 82
3000 30 160 DN150 22672 22701 123 4.1 5430 925 475 1320 600 240 1830 800 1230 3360 250 1380 9020 1050 4750
40 200 DN175 22673 20903 164
Diameter 1800 mm - Filtration bed 1 m.
20 125 DN110 24875 25049 75
2500 30 160 DN150 24876 25050 112 3.74 5530 1040 550 1020 380 270 2050 870 1380 2820 350 1250 9170 975 4850
40 200 DN175 24877 25051 150
20 140 DN125 24881 25055 92
3000 30 160 DN150 24882 25056 137 4.58 6800 1040 550 1320 460 270 2050 870 1380 3320 350 1500 11230 1225 5925
40 200 DN175 24883 25057 183
20 140 DN125 24887 25061 108
3500 30 200 DN175 24888 25062 162 5.41 8070 1040 550 1620 500 270 2050 870 1380 3850 350 1750 13290 1475 7000
40 225 DN200 24889 25063 216
20 160 DN150 24893 25067 125
4000 30 200 DN175 24894 25068 187 6.25 9340 1040 550 1920 540 270 2050 870 1380 4350 350 2000 15350 1700 8075
40 225 DN200 24895 25069 250
Media recommendations - Sand = 1.4 Kg/dm3 - Gravel = 1.5 Kg/dm3
420
Filtration bed 1 BOBBIN WOUND FILTERS

and 1.2 m

General features:
Fitted with:
- PP laterals with 0.3 mm slots
DOES NOT INCLUDE
VALVE MANIFOLD
2000 mm Maximum working pressure 2.5 Kg/cm2 Filters 2000 mm

2350 mm
Outlet Flow rate Code
mm m3/h
mm m3/h/m2
Available in
2500 30 160 130 05106 1 650 13.20
40 200 174 05109 1 650 13.20
20 140 106 24899 1 775 15.65
3000 30 160 159 24900 1 775 15.65
40 200 212 24901 1 775 15.65
20 160 125 05104 1 900 18.10
3500 30 200 187 05107 1 900 18.10
40 225 250 05110 1 900 18.10
20 160 144 24908 1 1025 20.55
4000 30 200 216 24909 1 1025 20.55
40 225 288 24910 1 1025 20.55
20 200 163 24914 1 1150 23.00
4500 30 225 245 24915 1 1150 23.00
40 250 326 24916 1 1150 23.00
COMMERCIAL POOL
EQUIPMENT
421
Filtration bed BOBBIN WOUND FILTERS

1 and 1.2 m

mm m3/h
mm m3/h/m2
20 160 119 24917 1 1350 20.25

3000 30 200 178 24918 1 1350 20.25
40 225 238 24919 1 1350 20.25
DOES NOT INCLUDE 20 160 141 17120 1 1500 23.00
VALVE MANIFOLD
3500 30 200 212 16696 1 1500 23.00
40 225 282 17121 1 1500 23.00
2000 mm 20 200 163 24926 1 1650 25.75
2350 mm 4000 30 225 245 24927 1 1650 25.75
40 250 327 24928 1 1650 25.75
Available in 20 200 186 22674 1 1800 28.50
40 250 371 22676 1 1800 28.50
20 200 208 24935 1 1950 31.25
5000 30 250 312 24936 1 1950 31.25
40 350 416 24937 1 1950 31.25

mm m3/h
mm m3/h/m2
20 140 87 07127 1 795 13.20

2500 30 160 130 07128 1 795 13.20
40 200 174 07129 1 795 13.20
20 140 106 25073 1 945 15.65
3000 30 160 159 25074 1 945 15.65
40 200 212 25075 1 945 15.65
20 160 125 07130 1 1100 18.10
3500 30 200 187 07131 1 1100 18.10
40 225 250 07132 1 1100 18.10
20 160 144 25082 1 1260 20.55
4000 30 200 216 25083 1 1260 20.55
40 225 288 25084 1 1260 20.55
20 200 163 25088 1 1420 23.00
4500 30 225 245 25089 1 1420 23.00
40 250 326 25090 1 1420 23.00
422

1 and 1.2 m
2000 mm y 2350 mm Rodas filters

mm m3/h
mm m3/h/m2
20 160 119 25091 1 1150 20.25

3000 30 200 178 25092 1 1150 20.25
40 225 238 25093 1 1150 20.25
20 160 141 22702 1 1300 23.00
DOES NOT INCLUDE
VALVE MANIFOLD 3500 30 200 212 22703 1 1300 23.00
40 225 282 22704 1 1300 23.00
20 200 163 25100 1 1450 25.75
2000 mm
4000 30 225 245 25101 1 1450 25.75
2350 mm
40 250 327 25102 1 1450 25.75
20 200 186 22705 1 1600 28.50
Available in 4500 30 225 279 22706 1 1600 28.50
US customary units
40 250 371 22707 1 1600 28.50
20 200 208 25109 1 1750 31.25
5000 30 250 312 25110 1 1750 31.25
40 350 416 25111 1 1750 31.25
COMMERCIAL POOL
EQUIPMENT
423

Volume (l)
Flow m3/h
Filtration
(m3/h/m2)
Filtration
area m2
Length
velocity
A B *C E F H I P T W Y weight Granulometry
(mm)
N (mm)
Code Code (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) in opert. 1 - 1.2 0.4 - 0.8
Kg mm mm
Diameter 2000 mm - Filtration bed 1 - 1.2 m
20 140 DN125 05103 07127 87
1050 6575
2500 30 160 DN150 05106 07128 130 4.34 6900 1090 710 500 500 500 2220 925 1470 2820 410 1250 11300
M=1.2 m M=1.2 m
40 200 DN175 05109 07129 174
20 140 DN125 24899 25073 106
1300 8025
3000 30 160 DN150 24900 25074 159 5.3 8470 1090 710 810 600 500 2220 925 1470 3320 410 1500 13790
M=1.2 m M=1.2 m
40 200 DN175 24901 25075 212
20 160 DN150 05104 07130 125
1550 9475
3500 30 200 DN175 05107 07131 187 6.25 10040 1090 710 1070 725 500 2220 925 1470 3850 410 1750 16280
M=1.2 m M=1.2 m
40 225 DN200 05110 07132 250
20 160 DN150 24908 25082 144
1800 10925
4000 30 200 DN175 24909 25083 216 7.21 11600 1090 710 650 600 500 2220 925 1470 4350 410 2000 18780
M=1.2 m M=1.2 m
40 225 DN200 24910 25084 288
20 200 DN175 24914 25088 163
2075 12375
4500 30 225 DN200 24915 25089 245 8.16 13180 1090 710 795 600 500 2220 925 1470 4880 410 2250 21380
M=1.2 m M=1.2 m
40 250 DN225 24916 25090 326
Diameter 2350 mm - Filtration bed 1 - 1.2 m
20 160 DN150 24917 25091 119
2575 9300
3000 30 200 DN175 24918 25092 178 5.94 11130 1270 710 800 600 500 2560 925 1740 3350 500 1500 18300
M=1.2 m M=1.2 m
40 225 DN200 24919 25093 238
20 160 DN150 17120 22702 141
3125 11050
3500 30 200 DN175 16696 22703 212 7.06 13300 1270 710 1100 700 500 2560 925 1740 3850 500 1750 21790
M=1.2 m M=1.2 m
40 225 DN200 17121 22704 282
20 200 DN175 24926 25100 163
3650 12800
4000 30 225 DN200 24927 25101 245 8.17 15470 1270 710 650 600 500 2560 925 1740 4380 500 2000 25280
M=1.2 m M=1.2 m
40 250 DN225 24928 25102 327
20 200 DN175 22674 22705 186
4200 14525
4500 30 225 DN200 22675 22706 279 9.28 17640 1270 710 820 700 500 2560 925 1740 4880 500 2250 28880
M=1.2 m M=1.2 m
40 250 DN225 22676 22707 371
20 200 DN175 24935 25109 208
4750 16250
5000 30 250 DN225 24936 25110 312 10.4 19800 1270 710 600 600 500 2560 925 1740 5440 500 2500 32380
M=1.2 m M=1.2 m
40 315 DN250 24937 25111 416
Media recommendations: Hydroanthracite = 0.8 Kg/dm3 - Sand = 1.4 Kg/dm3 - Gravel = 1.5 Kg/dm3
*With lenghts (dimension L) of 4000 mm or more, an additional central support is provided.
424

1 and 1.2 m
2500 mm Rodas filters

General features:
Fitted with:
- PP laterals with 0.3 mm slots
DOES NOT INCLUDE
VALVE MANIFOLD

2500 mm
mm m3/h
mm m3/h/m2
Available in
3500 30 200 223 24939 1 1285 28.00
40 225 297 24940 1 1285 28.00
ALL FILTER VESSELS
FROM 2.5 m AND ABOVE 20 200 172 22677 1 1450 31.80
WILL REQUIRE SPECIAL 4000 30 225 258 22678 1 1450 31.80
TRANSPORT VEHICLE.
PLEASE ASK FOR A 40 250 345 22679 1 1450 31.80
OF YOUR ENQUIRY.
4500 30 250 294 24948 1 1615 35.55
40 315 392 24949 1 1615 35.55
20 200 220 22680 1 1780 39.30
5000 30 250 329 22681 1 1780 39.30
40 315 439 22682 1 1780 39.30

mm m3/h
mm m3/h/m2
20 160 149 25112 1 1505 28.00

3500 30 200 223 25113 1 1505 28.00
40 225 297 25114 1 1505 28.00
20 200 172 22708 1 1670 31.80
4000 30 225 258 22709 1 1670 31.80
40 250 345 22710 1 1670 31.80
20 200 196 25121 1 1835 35.55
4500 30 250 294 25122 1 1835 35.55
40 315 392 25123 1 1835 35.55
20 200 220 22711 1 2000 39.30
5000 30 250 329 22712 1 2000 39.30
40 315 439 22713 1 2000 39.30
COMMERCIAL POOL
EQUIPMENT
425
2500 mm Rodas filters

Volume (l)
Flow m3/h
Filtration
(m3/h/m2)
Filtration
area m2
Length
velocity
A B *C E F H I P T W Y weight Granulometry
(mm)
N (mm)
Code Code (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) in opert. 1 - 1.2 0.4 - 0.8
Kg mm mm
Diameter 2500 mm - Filtration bed 1 - 1.2 m.
20 160 DN150 24938 25112 149
3175 11675
3500 30 200 DN175 24939 25113 223 7.34 14920 1360 710 960 770 500 2710 1300 1850 3850 500 1750 24320
M=1.2 m M=1.2 m
40 225 DN200 24940 25114 297
20 200 DN175 22677 22708 172
3725 13500
4000 30 225 DN200 22678 22709 258 8.62 17380 1360 710 500 750 500 2710 1300 1850 4380 500 2000 28250
M=1.2 m M=1.2 m
40 250 DN225 22679 22710 345
20 200 DN175 24947 25121 196
4300 15350
4500 30 250 DN225 24948 25122 294 9.80 19830 1360 710 750 750 500 2710 1300 1850 4940 500 2250 32300
M=1.2 m M=1.2 m
40 315 DN250 24949 25123 392
20 200 DN175 22680 22711 220
4850 17200
5000 30 250 DN225 22681 22712 329 10.98 22300 1360 710 500 750 500 2710 1300 1850 5440 500 2500 36230
M=1.2 m M=1.2 m
40 315 DN250 22682 22713 439
Media recommendations: Sand = 1.4 Kg/dm3 - Gravel = 1.5 Kg/dm3
*With lenghts (dimension L) of 4000 mm or more, an additional central support is provided.
426
Top or side manholes DN500 and DN600 for bobbin wound filters
Optional manhole access for bobbin wound filters in lateral or top position with nominal diameters of 500 and
600 mm. Designed to comply with DIN standard 19605 and to facilitate access in and out of the filter during
maintenance work. Manholes are in fibreglass reinforced polyester in the form of a flange with concave lid and
can only be integrated into the filter at the factory or by a specialist. The nut and bolt fastenings are removable,
as approsed to the standard DN400 manholes.
The manhole options are available with the following bobbin wound filter diameters:
Manhole DN500 mm*

Filters from 1200 mm to 3000 mm
Manhole DN600 mm*

Filters from 1800 mm to 3000 mm
Optional manhole 500 mm* 27950 - - -

Optional manhole 600 mm* 27951 - - -
*Either lateral or top position
COMMERCIAL POOL
EQUIPMENT
427
Valve manifold
Valve manifold - Coding
All valve manifolds (manual or automatically driven) are made of PVC (PN 10) with flanges for connection
to filters as per DIN-2501 standard.
Butterfly valves or Ball valves in PVC.
Automatic valve manifold, driven either by electric power or pneumatically, for carrying out filtration,
back washing, rinsing and shut down of the filters. Fitted with two valves without safety blocks (electric)
or double acting (Pneumatic), and the remaining valves with safety blocks (electric) or spring return
(pneumatic), to prevent an unexpected emptying of the installation.
All manifolds are supplied

disassembled and
without support brackets.
(For supports see page 187)
A B
Electric control panel: A: Electric driven without safety block

See page 186 B: Pneumatic driven spring return
In order to simplify the ordering process for Catalogues and Price Lists we have introduced a new code structure of valve manifolds for filters. This
new coding system consists in assigning a code for each manifold model as indicated in the tables below.
In order to determine the code you must identify the Type of filter, diameter and the desired type of manifold according to the tables below.
For manifolds with more than one filter please consult.
Table to identify filter type. Table to identify filter

diameter:
BB Bobbin wound Berlin filter, - 0.6 m height filter bed 10 1050

BS Bobbin wound Praga filter 12 1200
BA Bobbin wound Oslo filter 14 1400
OL Bobbin wound Olot filters 1.2 & 1.5 m bed depth 16 1600
AM Bobbin wound Ampuria filters 1.2 &* 1.5 m bed depth 18 1800
HZ Bobbin wound Rodas horizontal filters 20 2000
EU Laminated Europe filter 23 2350
VP Laminated Volcano filters, 0.6 m bed depth 25 2500
VI Bobbin wound Vic filter 26 2600
VO Laminated Vesubio filter, 1 m bed depth 28 2800
30 3000
Examples: Code Filter type code

1.- Manual manifold 4 Val. for Praga filter D.2000-140 00767
1.- BS 20
2.- Electric manifold 5 Val. for Praga filter D.1800-125 00785E
2.- BS 18
3.- Manual manifold 5 Val. for Olot filter D.1200-125 3.- 00785 OL 12
4.- Pneumatic manifold 5 Val. for Vic filter D.2350-160 09177N
4.- VI 23
428
VALVE MANIFOLD Available in US customary units

for manual batteries
Valve manifold for one filter

Code Description Code Description
Manual Manifolds - 4 Valves Manual Manifolds - 5 Valves
63 00747 MANUAL MANIFOLD 4 VAL. D. 63 63 00769 MANUAL MANIFOLD 5 VAL. D. 63
110 00758 MANUAL MANIFOLD 4 VAL. D.110 110 00780 MANUAL MANIFOLD 5 VAL. D.110
250
26244 MANUAL MANIFOLD 4 VAL. D.250 250 19133 MANUAL MANIFOLD 5 VAL. D.250
Electric Manifolds - 4 valves Electric Manifolds - 5 valves
63 00747E ELECTRIC MANIFOLD 4 VAL. D. 63 63 00769E ELECTRIC MANIFOLD 5 VAL. D. 63
110 00758E ELECTRIC MANIFOLD 4 VAL. D.110 110 00780E ELECTRIC MANIFOLD 5 VAL. D.110
250 26244E
ELECTRIC MANIFOLD 4 VAL. D.250 250 19133E ELECTRIC MANIFOLD 5 VAL. D.250
Pneumatic Manifolds - 4 Valves Pneumatic Manifolds - 5 Valves
63 00747N PNEUMATIC MANIFOLD 4 VAL. D. 63 63 00769N PNEUMATIC MANIFOLD 5 VAL. D. 63
110 00758N PNEUMATIC MANIFOLD 4 VAL. D.110 110 00780N PNEUMATIC MANIFOLD 5 VAL. D.110
COMMERCIAL POOL
EQUIPMENT
429
Control panel
Control panel for valve manifolds

Control panel for electrically or pneumatically actuated manifolds of 4 or 5 valves. For automatic filtration,
backwashing, rinsing and shut-down operations. Fitted with automatic programming installation that enables
the execution of all the required operations and can be personalised to suit your requirements. Quick and easy
installation with numbered terminal connection strip.
Voltage 230 V single phase. Does not include valve manifold.
For 4 valves
2 valves without block, 2 valves
with block. Electric actuator. 41005 1 6 0.04
2 valves double acting, 2 valves
spring return. Pneumatic actuator. 41009 1 6 0.04
For 5 valves
2 valves without block, 3 valves
with block. Electric actuator. 41007 1 6 0.04
2 valves double acting, 3 valves
spring return. Pneumatic actuator. 41011 1 6 0.04
Distance between PVC valve manifold supports Factory programmed automation as follows:

Type of actuator

NOMINAL Pressure Electric Pneumatic
mm 2 valves without block 2 valves double acting
0.4 MPa 0.6 MPa 1.0 MPa 1.6 MPa
2 valves with block 2 valves spring return
10 - - - 0.3 Program A Program C
For
12 - - - 0.3 Code 41005 Code 41009
4 valves
4 valves without block 4 valves without block
16 - - - 0.3
Program A Program A
20 - - - 0.4
Code 41006 Code 41010
25 - - 0.5 0.5 2 valves without block 2 valves double acting
32 - - 0.6 0.6 3 valves with block 3 valves spring return
40 - 0.8 0.8 0.8 Program B Program D
For
50 - 0.9 0.9 0.9 Code 41007 Code 41011
5 valves
5 valves without block 5 valves double acting
63 1.0 1.0 1.0 1.0
Program B Program B
75 1.0 1.0 1.2 1.2 Code 41008 Code 41012
90 1.0 1.2 1.3 1.4
110 1.2 1.3 1.5 1.7
125 1.3 1.5 1.7 1.9
140 1.3 1.6 1.8 2.0
160 1.5 1.7 2.0 2.2
180 1.6 1.8 2.1 2.4 Overhead PVC pressure pipe The distances shown correspond to
200 1.7 1.9 2.3 2.6 installations should be maximum temperatures of 20C. For higher
mounted on supports. temperatures multiply the values indicated
225 1.8 2.1 2.5 2.9
by the following reducing coefficients:
250 1.8 2.2 2.6 3.0 Distances between them should
280 2.0 2.3 2.8 3.2 be as indicated in the chart. - Between 20 and 35C coefficient 0.9
315 2.1 2.5 3.0 3.5
Distances are shown in metres
355 2.2 2.7 3.2 3.8
(according to UNE 53.399). - Between 35 and 45C coefficient 0.85
400 2.4 2.8 3.4 4.0
In vertical installations, the distance
450 2.5 3.0 3.7 4.3 between supports can be as per chart mul
500 2.7 3.2 3.9 4.6 tiplied by 1.3.
430
Supports for valve manifold
Valve manifold brackets

Easy assembly valve manifold brackets from 63 mm for all filter types. Totally adjustable in height, consisting
of vertical support pipes in zinc-plated steel, together with box of accessories.
Zinc-plated steel
Height 1.85 m 28690 1 3.8 -
Height 2.30 m 28691 1 4.5 -
Height 3.0 m 28692 1 5.9 -
Box of accessories consisting of:
2 support brackets with anti-vibration clamps
and fixing bolts
For 63 mm pipe 42598 1 1.5 0.011
For 75 mm pipe 28693 1 1.5 0.011
For 90 mm pipe 28694 1 1.5 0.011
For 110 mm pipe 28695 1 1.5 0.011
For 125 mm pipe 28696 1 1.5 0.011
For 140 mm pipe 28697 1 1.5 0.011
For 160 mm pipe 28698 1 2.5 0.011
For 200 mm pipe 28699 1 2.5 0.011
For 225 mm pipe 28700 1 2.5 0.011
Accessory box for additional supports:
Fixing plug and protection cap 28701 1 - -
Wall brackets for valve manifold

For all filter type from 63 mm pipe onwards. Consisting in zinc- plated steel support bracket with anti-vibra
tion clamp and fixing screws.Supply: 1 vertical support with manifold bracket.
For 63 mm pipe 35585 1 1.0 0.007

For 75 mm pipe 00855 1 1.2 0.007
For 90 mm pipe 00856 1 1.3 0.007
For 110 mm pipe 00857 1 1.4 0.007
For 125 mm pipe 00858 1 1.4 0.007
For 140 mm pipe 00859 1 1.5 0.007
For 160 mm pipe 00860 1 1.6 0.007
For 200 mm pipe 00861 1 1.7 0.007
For 225 mm pipe 00862 1 1.7 0.007
For 250 mm pipe 36120 1 2.0 0.011
For 315 mm pipe 36602 1 2.4 0.011
Air vents

Standard Air vent
In cast Aluminium painted yellow.
Inner ball in PVC
1 04143 12 2.3 0.009
11/2 04144 12 4.0 0.009
2 04145 12 4.5 0.018
Double effect air vent
Body in PP and fibreglass. Maximum pressure 16 Kg/cm2.
Seal in nitrile rubber.
1 49381 1 0.3 0.001
2 U-bend outlet with PVC elbow 49382 1 0.7 0.001
Code D A (mm) B (mm)

04143 1 74 44
04144 11/2 105 69
04145 2 105 69
COMMERCIAL POOL
EQUIPMENT
431
New
Active Clear Glass
AstralPool launches the new activated glass filter media Active Clear Glass.
The new product has the following benefits:
More efficient and environmentally friendly filtration.
Greater filtration capacity.
Water and energy savings.
Cleaner filter bed as bacteria does not remain trapped and fewer chemical products are needed.

Granulometry
0.5 mm - 1.0 mm 57011 1 25.0 0.667
1.0 mm - 3.0 mm 57012 1 25.0 0.667
3.0 mm - 7.0 mm 57013 1 25.0 0.667
% Filtration bed Volume

Filters Filters
Code Granulometry
D < 900 mm D > 900 mm
Grade 1 57011 0.5 - 1.0 mm 80% 60%
Grade 2 57012 1.0 - 3.0 mm 0% 20%
Grade 3 57013 3.0 - 7.0 mm 20% 20%
Filtration sand
Please ask for a quotation for other grades. 25 Kg bag.
Granulometry 0.4 - 0.8 mm 00596 1 25 0.667
Gravel
Please ask for a quotation for other grades. 25 Kg bag.
Granulometry 1 - 2 mm 11347 1 25 0.667

Granulometry 3 - 5 mm 11346 1 25 0.667
432
Anthracite
Please ask for a quotation for other grades. Bags 25 Kg.
Granulometry 0.8 - 1.6 mm 03696 1 50 0.8
Active carbon
Product with high capacity of pullant retention. Coconut shell based activated carbon.
Surface area: 1000 m2/g.
Apparent density: 0.45 - 0.50 g/cm3 24366 1 - -
Zeolite
Natural porous material that has higher filtration qualities than the normal substrate. It can be compared to
that of diatomaceous earth but at a lower price and lasting much longer. Bags 25 Kg.
Zeolite standard 0.5 - 1 mm 25845 1 - -


Including air vents.
COMMERCIAL POOL
EQUIPMENT
433
KIVU
Filter Pump
The highest
performing
plastic pump for
large water flow
on the market
High hydraulic efficiency (up to
85%)
Low sound level (up to 66dBA

for the 7.5 HP model)
For large water flow of up to

280 m3/h
High performance motors IE2 and

NEMA (and prepared for IE3).
Optional:
60 Hz pumps, code XXXX-0810. Centrifugal pumps
Pumps with NPT outlets,
code XXXXX-1110.
New
Kivu pump
High efficiency large plastic pump working at 1.500 rpm.
- 3 models: 7.5 HP 10 HP 15 HP.
- Low sound level: 70 dBA.
- Hydraulic efficiency w/o prefilter 85% (9906 ISO standard).
- Total efficiency over 70%.
- 6 x 5 connections.
- Independent plastic prefilter (25 liters), 6x6.
- High quality mechanical seal for salt water.
- IEC and NEMA high efficiency motors (IEC 2 and NEMA Premium).
Kivu pump
- Standard motor shaft (compatibility with any pump manufacturer).
- UL and GS marked.
Kivu 7.5 HP 230/400V 50Hz 56633 1 - -

Kivu 7.5 HP 400/690V 50Hz 56634 1 - -
Kivu 10 HP 230/400V 50Hz 56635 1 - -
Kivu 10 HP 400/690V 50Hz 56637 1 - -
Kivu 15 HP 230/400V 50Hz 56638 1 - -
Kivu pump - side view Kivu 15 HP 400/690V 50Hz 56639 1 - -
Edicin: 007.04.30
A TECHNICAL CARACTERISTICS
Di RENSEIGNEMENTS TECHNIQUES
Mi CARACTERSTICAS TCNICAS
P DATI TECHNICI
DNi TECHNISCHE ANGABEN
CARACTERISTICAS TECNICAS
I
O
DNa
Ma
Da
C1
J
C
Prefilter K E
H G
L
M
F
N
HP A Da Di DNa DNi C C1 E F G H I J K L M N O P Q R Ma Mi
KIVU
(mm)
56633 / 56634 7,5 653 285 250 150 - 6" 125 - 5" 446 688 279 206 290 540 410 653 141 1215 157 192 208 550 157 815 240 210
Codes Power A Da Di DNa DNI C / 56636
4p (1500 rpm) 56635 C1 10 E653 285 F250 150 -G6" 125 H
- 5" 446 I 688 279J206 290K 540 445L653 141 M 1250 N O 208 550
157 192 P 157 850Q 240 210R Ma Mi
56637 / 56638 15 653 285 250 150 - 6" 125 - 5" 446 688 279 206 290 670 510 653 271 1315 157 192 208 550 157 915 240 210
Archivo Pieza: BOMBA LPP-7.5CV
CV mm
56633 / 56634 7.5 653 285 250 150 - 6" 125 - 5" 446 688 279 206 290 540 410 653 141 1215 157 192 208 550 157 815 240 210
56633IM4_01
56635 / 56637 10 653 285 250 150 - 6" 125 - 5" 446 688 279 206 290 540 445 653 141 1250 157 192 208 550 157 850 240 210
56638 / 56639 15 653 285 250 150 - 6" 125 - 5" 446 688 279 206 290 670 510 653 271 1315 157 192 208 550 157 915 240 210
Accordingtostandard
ISO9906:2012 KIVUPUMPwithoutprefilter Accordingtostandard
H/Q ISO9906:2012
KIVUPUMPwithoutprefilter
24 75 HydraulicEff.(P3/P2)/Q
22 74
90%
73
20 80%
72
18 10HP 15HP
71
15HP 70%
16 70 7,5HP
Efficiency [%]
60%
H [m.w.a.]
14 69
10HP 68 dBA 50%
12
67
10 66 40%
7,5HP
8 65
30%
6 64
63 20%
4
62
2 10%
61
0 60 0%
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280
3
Q [m /h] Q [m3/h]
COMMERCIAL POOL
EQUIPMENT
435
Centrifugal pumps
Colorado pump with prefilter

Plastic Centrifugal 3000 r.p.m. pumps with prefilter for swimming pools. Ideal for large volumes at low pres
sure. Prefilter with a transparent lid for easy accessibility. The pump and the prefilter is made of polypropylene
reinforced with fibreglass. Bronze impeller, the shaft and prefilter basket in stainless steel. Motor protection
IP-55 of 3000 r.p.m. at 230/400 V or 400/690 V and 50 Hz from 7.5 HP to 12.5 HP.
7.5 HP, 230/400 V 44708 1 57 0.252
7.5 HP, 400/690 V 44709 1 57 0.252
10 HP, 230/400 V 44710 1 68 0.252
10 HP, 400/690 V 44711 1 68 0.252
12.5 HP, 230/400 V 44712 1 72 0.252
12.5 HP, 400/690 V 44713 1 72 0.252
VOLTS POWER DIMENSIONS (mm) L

CODE
(V) kW HP A B C D E F G H L
D F
C
44708 230/400
5.5 7.5 375 255 110 405 470 330 200 535 840
44709 400/690
44710 230/400
7.4 10 375 255 110 405 470 330 200 535 910
44711 400/690
C
H
E
44712 230/400
A
9.2 12.5 375 255 110 405 470 330 200 535 955
B
44713 400/690
Colorado pump without prefilter

Plastic Centrifugal 3000 r.p.m. pumps without prefilter for swimming pools. Ideal for large volumes at low
pressure. The pump and the prefilter is made of polypropylene reinforced with fibreglass. Bronze impeller, the
shaft and prefilter basket in stainless steel. Motor protection IP-55 of 3000 r.p.m. at 230/400 V or 400/690
V and 50 Hz from 7.5 HP to 12.5 HP.
7.5 CV, 230/400 V 44716 1 50 0.166
7.5 CV, 400/690 V 44717 1 50 0.166
10 CV, 230/400 V 44718 1 61 0.166
10 CV, 400/690 V 44719 1 61 0.166
12.5 CV, 230/400 V 44720 1 65 0.166
12.5 CV, 400/690 V 44721 1 65 0.166
VOLTS POWER DIMENSIONS (mm) L

CODE
(V) kW HP A B C D F G H L D F
C
44716 230/400
5.5 7.5 255 255 110 105 330 200 470 530
44717 400/690
44718 230/400
7.4 10 255 255 110 105 330 200 470 600
44719 400/690
44720 230/400
H
9.2 12.5 255 255 110 105 330 200 470 645
44721 400/690
C
A
Performance curves - with strainer Performance curves - without strainer
436
Optional:
code XXXXX-1110.
Aral SP-3000 pump

Made in cast iron. Mechanical seal in stainless steel. IP-54 motor protection. Stainless steel AISI-316 shaft.
With stainless steel AISI-304 strainer basket. 3000 rpm. Connections PN 16 according to DIN 2501.
Also available with bronze impeller.
Power 1.5 kW (2 HP)
Connec. DN 50-2
m.w.h. 6 8 10 12 14 15.2
m3/h 28 26 23.5 19 13 0
Voltage 230/400 V III 01187 1 38 0.050
Power 2.20 kW (3 HP)

Connec. DN 66-21/2
230 V valid for voltages between m.w.h. 8 10 12 14 16 18
220 & 240 V m3/h 48 43 39 30 18 0
400 V valid for voltages between
380 & 420 V Voltage 230/400 V III 01188 1 50 0.137
660 & 720 V Power 3 kW (4 HP)
Connec. DN 80-3
m.w.h. 8 10 12 14 16 18
m3/h 56 50 45 40 33 0
Voltage 230/400 V III 01189 1 53 0.137

Voltage 400/690 V III 01190 1 53 0.137
Power 4 kW (5.5 HP)

Connec. DN 80-3
m.w.h. 8 10 12 14 16 19
m3/h 65 60 55 48 41 0
Voltage 230/400 V III 01191 1 56 0.137

Voltage 400/690 V III 01192 1 56 0.137
Technical features
POWER (A) Power P2 CONNECTIONS Dimensions (mm)
Code VOLTAGE
II 220 V III 230 V III 400 V KW CV D DN A B C E F G I J K L O
01187 230/400 - 5.5 3.2 1.5 2 2 50 330 132 222 68 114 120 13 239 286 723 354
01188 230/400 - 9.6 5.5 2.2 3 21/2 65 360 101 283 90 139 140 13 263 286 743 461
01189 230/400 - 12 7 3 4 3 80 382 123 283 90 139 140 13 285 306 785 505
01190 400/690 - - 7 3 4 3 80 382 123 283 90 139 140 13 285 306 785 505
01191 230/400 - 16 9.1 4 5.5 3 80 382 123 283 90 139 140 13 285 306 785 505
01192 400/690 - - 9.1 4 5.5 3 80 382 123 283 90 139 140 13 285 306 785 505
COMMERCIAL POOL
EQUIPMENT
437
Optional:
code XXXXX-1110.
2.860 r.p.m. Maxim pump

Pump body and support in heat resistant plastic, S.S. motor shaft of AISI-316 with double insulation and with
IP-55 motor protection. 8 litre capacity strainer, with transparent lid.
3 thread union connections

m.w.h. 8 10 12 14 16 19.5
m3/h 56 50 42 34 23 0
(3.5 HP) 230/400 V III 08003 1 32 0.184
m.w.h. 8 10 12 14 16 19.5
m3/h 74 66 57 46 30 0
(4.5 HP) 230/400 V III 08004 1 34 0.184
m.w.h. 8 10 12 14 16 19.5
m3/h 88 78 67 53 34 0
(5.5 HP) 230/400 V III 08005 1 37 0.184
Dimensions
Performance curves
Technical features
A B C D E F G H I J
Model Typo Volts
mm mm mm mm mm mm mm mm mm mm
08003 3.5 230/400 815 430 385 90 287 200 140 530 65 468
08004 4.5 230/400 815 430 385 90 287 200 140 530 65 468
08005 5.5 230/400 847 430 385 90 287 200 140 530 65 500
438
Optional:
code XXXXX-1110.
Astramax pump Vertical discharge with strainer

Made in ABS and fibreglass. Can work without strainer. Most suitable for above-ground pools. Versatile and
light. Flow rate given at 4 m head for 1/4 HP & 1/3 HP and 8 m head for the rest of the range. 3,000 rpm.

7.500 l/h 0.19 kW (1/4 CV) 230 V II 16354 1 6.5 0.055

10.500 l/h 0.25 kW (1/3 CV) 230 V II 16356 1 7.1 0.055
8.000 l/h 0.38 kW (1/2 CV) 230 V II 16119 1 7.5 0.055
12.000 l/h 0.56 kW (3/4 CV) 230 V II 15746 1 10.0 0.055
14.500 l/h 0.74 kW (1 CV) 230 V II 15747 1 10.5 0.055
19.000 l/h 0.92 kW (1.25 CV) 230 V II 15748 1 13.0 0.055
Performance curves
Strainer Astramax pump

Strainer for Astramax pump. Body in ABS and fibreglass. With transparent lid and anti-corrosive strainer bas
ket. Suction 21/4 male thread. Connection to pump 23/4 female thread.

16104 1 1.5 0.017

COMMERCIAL POOL
EQUIPMENT
439
Optional:
code XXXXX-1110.
Aral C-3000 pump

Made in cast iron. Mechanical seal in stainless steel. IP-54 motor protection. Stainless steel AISI-316 shaft.
With stainless steel AISI-304 strainer basket. 3000 rpm. Connections PN 16 according to DIN 2501.

Power 2.20 kW (3 CV)
Connec. DN 80-3
m.w.h. 8 10 12 14 16 19
m3/h 59 54 46 40 30 0
Voltage 230/400 V III 01193 1 71 0.162

Connec. DN 80-3
220 & 240 V m3/h 67 61 55 48 40 0
400 V valid for voltages between Voltage 230/400 V III 01194 1 74 0.162
380 & 420 V Voltage 400/690 V III 01195 1 74 0.162
660 & 720 V
Power 4 kW (5.5 CV)
Connec. DN 100-4
m.w.h. 8 10 12 14 16 20
m3/h 78 72 66 60 52 0
Voltage 230/400 V III 01196 1 80 0.162

Voltage 400/690 V III 01197 1 80 0.162
Power 4 kW (5.5 CV)

Connec. DN 100-4
m.w.h. 8 10 12 14 16 20
m3/h 100 89 70 60 48 0
Voltage 230/400 V III 01198 1 89 0.197

Voltage 400/690 V III 01199 1 89 0.197
SEE TECHNICAL FEATURES IN PAGE 442
440
Optional:
code XXXXX-1110.
Aral C-3000 pump

Made in cast iron. 3,000 rpm. Also available with bronze impeller.
Power 5.5 kW (7.5 HP)
Connec. DN 100-4
m.w.h. 8 10 12 14 16 19
m3/h 126 115 100 80 60 0
Voltage 230/400 V III 01200 1 113 0.197

Voltage 400/690 V III 01201 1 113 0.197

230 V valid for voltages between Connec. DN 100-4"
220 & 240 V m.w.h. 8 10 12 14 16 20
400 V valid for voltages between m3/h 145 140 123 107 86 0
380 & 420 V
660 & 720 V Voltage 400/690 V III 01203 1 115 0.197
Power 8.7 kW (12.5 CV) Connections

Suction DN 125-5
Discharge DN 100-4
m.w.h. 8 10 12 14 16 21
m3/h 165 158 149 135 115 0
Voltage 230/400 V III 01204 1 115 0.197

Voltage 400/690 V III 01205 1 115 0.197
Power 11.04 kW (15 CV) Connections

Suction DN 125-5
Discharge DN 125-5
m.w.h. 8 10 12 14 16 22
m3/h 195 190 175 160 140 0
Voltage 230/400 V III 01206 1 121 0.197

Voltage 400/690 V III 01207 1 121 0.197

COMMERCIAL POOL
EQUIPMENT
441
Centrifugal pumps
Aral C-3000 pump, technical features
Current in Amps Power Suction Connections Discharge Connection

VOLTAGE
Code III III DA PA QA Di Pi Qi
V kW HP DNA DNi
230 V 400 V (mm) (mm) N (mm) (mm) (mm) N (mm)
01193 230/400 9 5.2 2.20 3 200 80-3 160 8 18 200 80-3 160 8 18
01194 230/400 12 7
2.95 4 200 80-3 160 8 18 200 80-3 160 8 18
01195 400/690 7
01196 230/400 16 9.1
4 5.5 200 80-3 160 8 18 200 80-3 160 8 18
01197 400/690 9.1
01198 230/400 16 9.1
4 5.5 220 100-4 180 8 18 220 100-4 180 8 18
01199 400/690 9.1
01200 230/400 19 11
5.5 7.5 220 100-4 180 8 18 220 100-4 180 8 18
01201 400/690 11
01202 230/400 26 15
7.5 10 220 100-4 180 8 18 220 100-4 180 8 18
01203 400/690 15
01204 230/400 39 22
8.7 12.5 250 125-5 210 8 18 220 100-4 210 8 18
01205 400/690 22
01206 230/400 39 22.5
11.04 15 250 125-5 210 8 18 250 125-5 210 8 18
01207 400/690 22.5
Power Dimensions (mm)

Code
kW CV A B C E F G I J K L M O
01193 2.20 3 485 180 160 70 212 100 14 435 245 888 65 340
01194
2.95 4 485 180 160 70 212 100 14 435 245 888 65 340
01195
01196
4 5.5 485 180 160 70 212 100 14 435 273 920 65 340
01197
01198
4 5.5 487 205 160 95 187 125 14 425 273 940 55 365
01199
01200
5.5 7.5 487 205 160 95 187 125 14 425 315 976 55 365
01201
01202
7.5 10 487 205 160 95 187 125 14 425 315 976 55 365
01203
01204
8.7 12.5 487 205 160 95 187 125 14 425 355 1016 55 365
01205
01206
11.04 15 517 233 181 95 187 125 14 455 355 1029 70 365
01207
442
Optional:
code XXXXX-1110.
Aral C-1500 pump

Made in cast iron. Mechanical seal in stainless steel. IP-54 motor protection. Stainless steel AISI- 316 shaft.
With stainless steel AISI-304 strainer basket. Connections PN 16 according to DIN 2501. 1,450 rpm.
Also available with bronze impeller.
Power 2.20 kW (3 HP) Connec.
Suction DN 65-21/2
Discharge DN 50-2
m.w.h. 8 10 12 14 16 20
m3/h - 50 44 30 0 -
Voltage 230/400 V III 01208 1 107.0 0.195
Power 3 kW (4 HP) Connec.

Suction DN 80-3
Discharge DN 65-21/2
220 & 240 V m3/h - 68 60 45 0 -
380 & 420 V Voltage 230/400 V III 01209 1 115.0 0.195
690 V valid for voltages between Voltage 400/690 V III 01210 1 115.0 0.195
660 & 720 V
Power 4 kW (5.5 HP) Connec.
Suction DN 80-3
m.w.h. 8 10 12 14 16 19
m3/h - 88 80 70 58 0
Voltage 230/400 V III 01211 1 142.0 0.195

Voltage 400/690 V III 01212 1 142.0 0.195
Power 5.5 kW (7.5 HP) Connec.

Suction DN 80-3
m.w.h. 8 10 12 14 16 21
m3/h - 108 98 88 77 0
Voltage 230/400 V III 01213 1 163.0 0.407

Voltage 400/690 V III 01214 1 163.0 0.407

Suction DN 100-4
Discharge DN 80-3
m.w.h. 8 10 12 14 16 18
m3/h - 115 101 87 70 0
Voltage 230/400 V III 01215 1 170.0 0.407

Voltage 400/690 V III 01216 1 170.0 0.407
Power 7.5 kW (10 HP) Connec.

Connec. DN 100-4
Discharge DN 80-3
m.w.h. 8 10 12 14 16 20
m3/h - 150 140 125 115 0
Voltage 230/400 V III 01217 1 179.0 0.407

Voltage 400/690 V III 01218 1 179.0 0.407
VSEE TECHNICAL FEATURES IN PAGE 445

COMMERCIAL POOL
EQUIPMENT
443
Optional:
code XXXXX-1110.
Aral C-1500 pump

Made in cast iron. 1,450 rpm. Also available with bronze impeller.
Suction DN 125-5
Discharge DN 100-4
m.w.h. 8 10 12 14 16 20
m3/h - 192 175 155 130 -
Voltage 230/400 V III 01219 1 215.0 0.407

Voltage 400/690 V III 01220 1 215.0 0.407
Power 11 kW (15 CV) Connec.

Suction DN 125-5
230 V valid for voltages between Discharge DN 100-4
220 & 240 V m.w.h. 8 10 12 14 16 18 20 22
400 V valid for voltages between m3/h - 200 185 165 145 125 95 0
380 & 420 V
690 V valid for voltages between Voltage 230/400 V III 01221 1 245.0 0.407
660 & 720 V Voltage 400/690 V III 01222 1 245.0 0.407
Power 15 kW (20 CV) Connec.

Suction DN 150-6
Discharge DN 125-5
m.w.h. 10 12 14 16 18 19
m3/h 240 210 180 145 105 0
Voltage 230/400 V III 01223 1 255.0 0.407

Voltage 400/690 V III 01224 1 255.0 0.407
Power 18.40 kW (25 CV) Connec.

Suction DN 150-6
Discharge DN 125-5
m.w.h. 8 10 12 14 16 18 20 22
m3/h - 275 258 234 202 169 120 0
Voltage 230/400 V III 01225 1 255.0 0.407

Voltage 400/690 V III 01226 1 255.0 0.407
444
Centrifugal pumps
Aral C-1500 technical features
Current in Amps Power Suction Connection Discharge Connection

VOLTAGE
V kW HP DNA DNi
01208 230/400 9.8 5.7 2.20 3 185 65-21/2 145 8 18 165 50-2 125 4 18
01209 230/400 12.1 7
3 4 200 80-3 160 8 18 185 65-21/2 145 4 18
01210 400/690 7
01211 230/400 17 9.7
4 5.5 200 80-3 160 8 18 185 65-21/2 145 4 18
01212 400/690 9.7
01213 230/400 21.3 12.3
5.5 7.5 200 80-3 160 8 18 185 65-21/2 145 4 18
01214 400/690 12.3
01215 230/400 21.3 12.3
5.5 7.5 220 100-4 180 8 18 200 80-3 160 8 18
01216 400/690 12.3
01217 230/400 28.4 16.4
7.5 10 220 100-4 180 8 18 200 80-3 160 8 18
01218 400/690 16.4
01219 230/400 32.9 19
9.20 12.5 250 125-5 210 8 18 220 100-4 180 8 18
01220 400/690 19
01221 230/400 42 24
11 15 250 125-5 210 8 18 220 100-4 180 8 18
01222 400/690 24
*01223 230/400 53.7 32
15 20 285 150-6 240 8 22 250 125-5" 210 8 18
*01224 400/690 32
*01225 230/400 53.5 36
18.40 25 285 150-6 240 8 22 250 125-5" 210 8 18
*01226 400/690 36

Code
kW HP A B C C1 E F G I J K L M O
01208 2.20 3 482 200 160 70 212 100 14 432 270 880 94 360
01209
2.95 4 482 225 180 95 250 125 14 419 310 880 50 405
01210
01211
4 5.5 484 253 196 120 280 162 18 403 333 967 34 449
01212
01213
5.5 7.5 484 253 196 120 280 162 18 403 410 1044 39 449
01214
01215
5.5 7.5 514 282 193 120 315 162 18 433 410 1072 69 486
01216
01217
7.5 10 514 282 193 120 315 162 18 433 450 1112 69 486
01218
01219
9.20 12.5 522 280 224 120 315 162 18 441 450 1128 77 504
01220
01221
11 15 522 280 224 120 315 162 18 441 490 1188 77 504
01222
01223
*15 20 747 356 255 507 120 315 158 18 668 520 1438 87 611
01224
01225
*18.40 25 747 356 255 507 120 315 158 18 668 555 1473 87 611
01226
COMMERCIAL POOL
* With strainer 37 l
EQUIPMENT
445
Optional:
60 Hz pumps, code XXXX-0810. Special Centrifugal pumps for sea water
code XXXXX-1110.
Baikal C-3000 pump

Made in bronze. Stainless steel mechanical seal. IP-54 motor protection. Stainless Steel AISI- AISI-316 shaft.
In built. S.S. AISI-304 strainer basket. Connections s/DIN 2501 PN16. 3000 rpm.

Connec. DN 80 - 3
m.w.h. 8 10 12 14 16 19
m3/h 59 54 46 40 30 0
Voltage 230/400 V III 01242 1 81 0.162

Connec. DN 80 - 3
m.w.h. 8 10 12 14 16 19
m3/h 67 61 55 48 40 0
220 & 240 V Voltage 230/400 V III 01243 1 84 0.162
380 & 420 V
660 & 720 V Power 4 kW (5.5 HP)
Connec. DN 80 - 3
m.w.h. 8 10 12 14 16 20
m3/h 78 72 66 60 52 0
Voltage 230/400 V III 01245 1 91 0.162

Voltage 400/690 V III 01246 1 91 0.162
Power 4 kW (5.5 HP)

Connec. DN 100 - 4
m.w.h. 8 10 12 14 16 20
m3/h 100 89 70 60 48 0
Voltage 230/400 V III 01247 1 101 0.197

Voltage 400/690 V III 01248 1 101 0.197
446
Optional:
code XXXXX-1110.
Baikal C-3000 pump

Made in bronze. 3,000 rpm.
Power 5.5 kW (7.5 HP)
Connec. DN 100 - 4
m.w.h. 8 10 12 14 16 19
m3/h 126 115 100 80 60 0
Voltage 230/400 V III 01249 1 128 0.197

Voltage 400/690 V III 01250 1 128 0.197

Connec. DN 100-4
m.w.h. 8 10 12 14 16 20
220 & 240 V Voltage 230/400 V III 01251 1 131 0.197
380 & 420 V
660 & 720 V Power 8.7 kW (12.5 HP) Connections
Suction DN 125-5
Discharge DN 100-4
m.w.h. 8 10 12 14 16 21
m3/h 165 158 149 135 115 0
Voltage 230/400 V III 01253 1 131 0.197

Voltage 400/690 V III 01254 1 131 0.197
Power 11.04 kW (15 HP) Connections

Suction DN 125-5
Discharge DN 125-5
m.w.h. 8 10 12 14 16 22
m3/h 195 190 175 160 140 0
Voltage 230/400 V III 01255 1 137 0.197

Voltage 400/690 V III 01256 1 137 0.197

COMMERCIAL POOL
EQUIPMENT
447
Special Centrifugal pumps for sea water
Baikal C-3000 pump technical features
Current in Amps Power Suction Connection Discharge Connection

Voltage
V kW CV DNA DNi
01242 230/400 9 5.2 2.20 3 200 80-3 160 8 18 200 80-3 160 4 18
01243 230/400 12 7
2.95 4 200 80-3 160 8 18 200 80-3 160 4 18
01244 400/690 7
01245 230/400 16 9.1
4 5.5 200 80-3 160 8 18 200 80-3 160 4 18
01246 400/690 9.1
01247 230/400 16 9.1
4 5.5 220 100-4 180 8 18 220 100-4 180 4 18
01248 400/690 9.1
01249 230/400 19 11
5.5 7.5 220 100-4 180 8 18 220 100-4 180 8 18
01250 400/690 11
01251 230/400 26 15
7.5 10 220 100-4 180 8 18 220 100-4 180 8 18
01252 400/690 15
01253 230/400 39 22
8.7 12.5 250 125-5 210 8 18 220 100-4 210 8 18
01254 400/690 22
01255 230/400 39 22.5
11.04 15 250 125-5 210 8 18 250 125-5 210 8 18
01256 400/690 22.5

Code
kW CV A B C E F G I J K L M O
01242 2.20 3 485 180 160 70 212 100 14 435 245 888 65 340
01243
2.95 4 485 180 160 70 212 100 14 435 245 888 65 340
01244
01245
4 5.5 485 180 160 70 212 100 14 435 273 920 65 340
01246
01247
4 5.5 487 205 160 95 187 125 14 425 273 940 55 365
01248
01249
5.5 7.5 487 205 160 95 187 125 14 425 315 976 55 365
01250
01251
7.5 10 487 205 160 95 187 125 14 425 315 976 55 365
01252
01253
8.7 12.5 487 205 160 95 187 125 14 425 355 1016 55 365
01254
01255
11.04 15 517 233 181 95 187 125 14 455 355 1029 70 365
01256
448
Optional:
code XXXXX-1110.
Baikal SP-3000 pump

Made in bronze. Stainless steel mechanical seal. IP-54 motor protection. Stainless steel AISI-316 shaft.
3.000rpm.
Power 1.5 kW (2 CV)
Connec. DN 50 - 2
m.w.h. 6 8 10 12 14 15.2
m3/h 28 26 23.5 19 13 0
Voltage 230/400 V III 01236 1 38 0.050

Connec. DN 65 - 21/2
m.w.h. 8 10 12 14 16 18
220 & 240 V
380 & 420 V
690 V valid for voltages between Power 3 kW (4 CV)
660 & 720 V Connec. DN 80 - 3
m.w.h. 8 10 12 14 16 18
m3/h 56 50 45 40 33 0
Voltage 230/400 V III 01238 1 59 0.137

Voltage 400/690 V III 01239 1 59 0.137
Power 4 kW (5.5 CV)

Connec. DN 80 - 3
m.w.h. 8 10 12 14 16 19
m3/h 65 60 55 48 41 0
Voltage 230/400 V III 01240 1 62 0.137

Voltage 400/690 V III 01241 1 62 0.137
Technical features
Intensidad Power Connections Dimensions (mm)
Code Voltage V II III III
kW CV D DN A B C E F G I J K L O
220 V 230 V 400 V
01236 230/400 - 5.5 3.2 1.5 2 2 50 330 132 222 68 114 120 13 239 286 723 354
01237 230/400 - 9.6 5.5 2.20 3 21/2 65 360 101 283 90 139 140 13 263 286 743 461
01238 230/400 - 12 7 3 4 3 80 382 123 283 90 139 140 13 285 306 785 505
01239 400/690 - - 7 3 4 3 80 382 123 283 90 139 140 13 285 306 785 505
01240 230/400 - 16 9.1 4 5.5 3 80 382 123 283 90 139 140 13 285 306 785 505
01241 400/690 - - 9.1 4 5.5 3 80 382 123 283 90 139 140 13 285 306 785 505
COMMERCIAL POOL
EQUIPMENT
449
Strainers
Strainer in polypropylene and fibreglass

Flanges drilled according to DIN-2501 Standard. Supplied with 3 piece coupling at the inlet. 8 litre capacity.
Inlet size: 90 mm and outlet 110 mm.
09879 1 8.4 0.098
Strainer in polyester and fibreglass 33 l capacity

Flanges drilled according to DIN-2501 Standard. Hoop type clamp. Drain plug. Maximum working
pressure: 1.5 bar.
33 l Capacity
Connections 90 mm, 37 m3/h 04656 1 25 0.180
Strainer in polyester and fibreglass 60 l capacity

Flanges drilled according to DIN-2501 Standard. Hoop type clamp. Drain plug. Maximum working pressure
1.5 bar.
60 l Capacity
Strainer in polyester and fibreglass with sight glass lid 33 l capacity

Flanges drilled according to DIN-2501 Standard. Hoop type clamp. Drain plug. Maximum working pressure:
1.5 bar.
33 l Capacity
Strainer 3, 37 m3/h 15648 1 25 0.180
Strainer 4, 55 m3/h 15649 1 25 0.180
33 l POLYESTER STRAINERS
Sightglass Cover Hoop clamp

Code 15644 15645 15646 15647 15648 15649
Gasket H 635 635 635 635 635 635
D 475 475 475 475 475 475
M 353 353 353 353 353 353
90 110 125 140 3" 4"
E 500 516 532 546 500 516
Drain plug Connection to pump
33 L basket (5)
450
Strainers
Strainer in polyester and fibreglass with sightglass lid 60 l capacity

Flanges drilled according to DIN-2501 Standard. Hoop type clamp. Drain plug. Maximum working pressure:
1.5 bar.
60 l Capacity
Connections 160 mm. 118 m /h 3
15650 1 37 0.350
Connections 200 mm. 174 m3/h 15651 1 37 0.350
Connections 225 mm. 233 m3/h 15652 1 37 0.350
Strainer 6. 118 m3/h 15653 1 37 0.350
Strainer 8. 233 m3/h 15654 1 37 0.350
60 l POLYESTER STRAINER

Sightglass Hoop clamp Cover
Gasket
Cesto 60 l ( 5)
Connection to pump Drain plug

Basket 60 l (5)
New
Kivu strainers
Flanges drilled to standard DIN-2501. Quick closing lid. Polypropylene basket. Drain plug. Maximum working
pressure 1.5 bar.
25 l Capacity
6 Connections DN 150 56733 1 9.9 0.08
Arals strainers
Housing and cover in cast iron. AISI-304 Stainless Steel Strainer basket. Flange connection are manufactured
in accordance with DIN-2501 Standard. Maximum working pressure 2.5 bar.
11 l Capacity
Flanges DN 65 (21/2) DN 65 (21/2) 20026 1 35 0.051
*Flanges DN 80 (3) DN 80 (3) 20027 1 35 0.051
*Flanges DN 80 (3") DN 80 (3") (Especial) 20028 1 35 0.051
Aral 11 l
Flanges DN 100 (4) DN 100 (4) 20029 1 35 0.051
Flanges DN 125 (5) DN 125 (5) 20030 1 35 0.051
Flanges DN 80 (3) DN 65 (21/2) 20031 1 35 0.051
Flanges DN100 (4) DN 80 (3) 20032 1 35 0.051
Flanges DN 125 (5) DN 100 (4) 20033 1 35 0.051
37 l Capacity
Flanges DN 125 (5) DN 125 (5) 01267 1 129 0.319
Flanges DN 150 (6) DN 150 (6) 01268 1 129 0.319
Flanges DN 150 (6) DN 125 (5) 01272 1 129 0.319
* See differences in technical chart
Aral 37 l
COMMERCIAL POOL
EQUIPMENT
451
Strainers
Strainers Baikal
Bronze strainers. Flanges drilled according to DIN-2501 Standard. Stainless steel AISI-304 basket. Maximum
working pressure 2.5 bar.
11 l Capacity
Flanges DN 65 (21/2) DN 65 (21/2) 01273 1 44 0.051
Flanges DN 80 (3) DN 80 (3) 01274 1 44 0.051
Flanges DN 100 (4) DN 100 (4) 01275 1 44 0.051
Flanges DN 125 (5) DN 125 (5) 01276 1 44 0.051
Flanges DN 100 (4) DN 80 (3) 01278 1 44 0.051
Flanges DN 125 (5) DN 100 (4) 01279 1 44 0.051
Technical features
Inlet Connection Outlet Connection

Code Capacity Dimensions (mm)
QA Qi
DA PA Di Pi
DNA DNi
Aral Baikal l (mm) (mm) N (mm) (mm) N A B C E F G
(mm) (mm)
20026 01273 11 185 65-2 /2
1
145 4 18 185 65-2 /2
1
145 4 18 315 392 295 159
20027 01274 11 200 80-3 160 8 18 200 80-3 160 8 18 315 392 295 159
20028 - 11 200 80-3 160 8 18 200 80-3 160 4 18 315 392 295 159
20029 01275 11 220 100-4 180 8 18 220 100-4 180 8 18 315 392 295 159
20030 01276 11 250 125-5 210 8 18 250 125-5 210 8 18 315 392 295 159
20031 01277 11 200 80-3 160 8 18 185 65-21/2 145 4 18 315 392 295 159
20032 01278 11 220 100-4 180 8 18 200 80-3 160 8 18 315 392 295 159
20033 01279 11 250 125-5 210 8 18 220 100-4 180 8 18 315 392 295 159
01267 - 37 250 125-5 210 8 18 250 125-5 210 8 18 649 600 542 250 507 257
01268 - 37 285 150-6 240 8 22 285 150-6 240 8 22 649 600 542 250 507 257
01272 - 37 285 150-6 240 8 22 250 125-5 210 8 18 649 600 542 250 507 257
11 l. 37 l.
Inlet
Outlet
Inlet
Outlet
452
Strainers
Strainers in Stainless Steel

With removable basket. Housing in AISI-304 and strainer basket in AISI-316. Models come in varying diame
ters to suit pump suctions (impeller protection). Rough straining for different installations.
S.S. strainer DN 100 with PVC flange 21461 1 17.6 0.06

S.S. strainer DN 100 TF with PVC flange 21462 1 21.6 0.09
Diameter External volume Interior basket

Pressure Dimensions (mm) Dimensions (mm) Weight
Code Inlet
Purge (bar) Material (kg)
Outlet A B H H1 H2 H Perforation
21461 DN 100 1/2 3 292 410 520 294 254 AISI 316 270 350 6 mm 17.6
21462 DN 100 1/2 3 292 425 735 593 308 AISI 316 270 415 6 mm 21.6
21463 DN 125 1/2 3 292 410 520 294 254 AISI 316 270 350 6 mm 19.0
21464 DN 125 1/2 3 292 425 735 593 308 AISI 316 270 415 6 mm 23.0
21465 DN 150 1/2 3 350 450 520 294 254 AISI 316 320 350 6 mm 24.8
21466 DN 150 1/2 3 350 470 775 595 295 AISI 316 320 415 6 mm 31.0
21467 DN 200 1/2 3 350 450 520 294 254 AISI 316 320 350 6 mm 25.4
21468 DN 200 1/2 3 350 470 775 595 295 AISI 316 320 415 6 mm 31.6
STANDARD MODEL TF MODEL

COMMERCIAL POOL
EQUIPMENT
453
Valves and flanges
Check valves
Nominal pressure 10 kg/cm2. Mounted between flanges. Available in PN 16 and PN 25 under special order.
Outlets 50 mm 20239 1
Vibration absorbent brushing

Flanges in galvanised steel. Elastic material: Polychloroprene. Maximum temperature: 95 C. Nominal pres
sure: 10 kg/cm2 (PN/10). Available in PN 16 under special order.
Eccentric cones
In cast iron.
Flanges DN 100 (4) DN80 (3) 01280 1 12 0.04
Flanges DN 125 (5) DN100 (4) 01281 1 17 0.04
Flanges DN 150 (6) DN125 (5) 01282 1 23 0.04
Discharge
Inlet Outlet Eccentric cone
Suction

Technical features
Codi Inlet connection Outlet Connection Dimensions
QA Qi (mm)
Cast DA
DNA PA Di DNi Pi
iron (mm) N N A L
01280 220 100-4 180 8 18 200 80-3 160 8 18 10 275
01281 250 125-5 210 8 18 220 100-4 180 8 1 12.5 325
01282 285 150-6 240 8 22 250 125-5 210 8 18 12.5 385
454
Salt electrolysis AND pH control
Salt Electrolysis for public pools
Salt water chlorinators for commercial pools are becoming popular because they are efficient, practical,
safe and well priced. Our wide range of industrial electrolysis systems covers self-cleaning equipment of up
to 600 grams/hour of Chlorine, which makes it possible to use saline electrolysis to treat the water at any
public use facility.
Main advantages:
Safety: There is no need to store, handle or dose any chemical products and therefore it is a much safer
system. The raw material stored is common salt.
Savings: The introduction of saline electrolysis systems can bring net savings in operating costs of around
50-60%, with respect to traditional systems
Peristaltic pump not included.
EASY SALT PRO-CHLORE SALT NATURE SALT

Self-cleaning electrodes 7.000 - 10.000 h 8.000 - 12.000 h 6.000 - 8.000 h
5 - 12 g/l 5 - 12 g/l 2 - 5 g/l
Salinity range (recom. 5 - 6 g/l) (recom 5 - 6 g/l) (recom 2 - 5 g/l)
Production g/h 70 - 180 50 - 600 50 - 300
Easy Salt
SELF-CLEANING electrolysis system, for residential and public pool applications use up to 180 g chlorine/
hour. Easy Salt is a compact and cost competitive equipment. Dispone de opciones de control integradas (EXT-
1, EXT-1E) o externas (AP PR, Smart Control).
Easy Salt 70 53799 1 70 0.29
Easy Salt 90 53801 1 80 0.29
Easy Salt 180 53803 1 90 0.29
External control option
(AP PR 60359-60361-60362, Smart Control 54523-4-5)
Easy Salt 70 + pH/ORP (EXT-1) 53800 1 70 0.29

Optional probe holder for EXT-1
(EXT-1+57769=EXT-1E) 57769 1 - -
Optional: MODBUS RTU Communication Kit 60363 1 - -
Valid for Easy Salt and Pro-Chlore Salt:

pH ORP Cloro libre*
Sensor H-035 / Calibration solution pH Sensor RX-02 / Calibration solution ORP
Sensor CL0102
(7.0/4.0) (470 mV)
Included elements
Probe holder fitting (2x) PE " (standard for all models), probe holder panel with inductive flow detector,
flow regulator and pre-filter (standard for all ppm models)
Dimensions 600 x 240 x 120 mm (panel)
pH control output 230 V / 50-60 Hz / 0.5 A max, ON/OFF
Range 0.0 - 9.9 0 - 999 mV 0.0 - 5.0 ppm
Control range 7.0 - 7.8 650 - 850 mV 0.0 - 5.0 ppm
Precision 0.1 pH 1 mV 0.1 ppm
(pH) Automatic, two modes
FREE CHLORINE: automatic (one point with
Calibration Fast: one point calibration Automatic calibration of one point
external DPD calibrator, not supplied)
Standard: two point calibration
* Not available for Easy Salt.
COMMERCIAL POOL

EQUIPMENT
455
Salt electrolysis AND pH control
Pro-Chlore Salt
Our Pro-Chlore Salt range includes EX electrodes that provide the highest level of durability in self-cleaning
systems. The Pro-Chlore Salt range with its integrated EXTENSION options (EXT-1, EXT-1E, EXT-2) or external
control options (AP PR200, Smart Control) includes a control and regulation system for ORP values (Redox) or
ppm, as well as pH, allowing improved management of the equipment and an excellent water quality at all
times. The Pro-Chlore range can be manufactured, on request, for seawater (Pro Chlore Salt AM Series). Exter
nal control option (AP PR 60359-60361-60362, Smart Control 54523-4-5).
Pro-Chlore Salt A-50EX 35252 1 55 0.17
Pro-Chlore Salt A-50EX + pH/ORP (EXT-1) 35258 1 55 0.17

(EXT-1+57769=EXT-1E) 57769 1 - -
Pro-Chlore Salt A-50EX + pH/PPM (EXT-2) 45836 1 60 0.17

Probe holder included with EXT-2
Options for seawater (on request). Example: 45836-AM.
Valid for Pro-Chlore Salt, Easy Salt and Nature Salt:

A-50 A-80 A-120 A-180 A-300 A-600
Input (ac) 230 V / 50 - 60 Hz 380 V / 50 - 60 Hz
2.4 A 3.9 A 5.8 A 3.3 A 5.5 A 12 A
Cable: H017 V/K
Input (ac) 3 x 1.0 mm 3 x 1.0 mm 3 x 2.5 mm 5 x 1.5 mm 5 x 4 mm 5 x 4.0 mm
Output (dc) 2 x 10 mm 2 x 25 mm 2 x 35 mm 2 x 70 mm 2 x 120 mm 3 x 240 mm
Pipe connections: Rosca hembra 11/2" Flanges D63 mm Flanges D90 mm
Fuse 5.0 A (6 x 32 mm) 7.0 A (6 x 32 mm) 10 A (6 x 32 mm) QM K6 QM K10 QM K20
Output 9 V / 25 A 10 V / 40 A 10 V / 65A 10 V / 90 A 10 V / 150 A 10 V / 300 A
Cooling Natural Ventilador
Minimum flow 9 m/h 14 m/h 20 m/h 30 m/h 50 m/h 90 m/h
Electrodes 8 12 8 12 16 2 x 16
456
Salt electrolysis AND pH/Cl control
Nature Salt
Eco Salt Plus products have a sustainable cycle through the removal of chloramines, running through 2 grams
of salt per liter and no chemical treatment. Self-cleaning commercial salt electrolysis system for use in public
pools use up to 300 gr. chlorine / hour. TWIN-CELL Cell high pressure SYSTEM equipped with electrodes
Nature Salt quality. Expanded functions by means of optional integrated control extensions (EXT-1, EXT 1E,
EXT-2) or external panel extensions (AP PR Series and Smart Control Series).
Nature Salt 50EX/LS 53810 1 80 0.17
Nature Salt 80EX/LS 53811 1 90 0.19
Nature Salt 120EX/LS 53812 1 130 0.36
Nature Salt 180EX/LS 53813 1 145 0.36
Nature Salt 300EX/LS 53814 1 170 0.36
Nature Salt 50EX/LS + pH/ORP (EXT-1) 53815 1 80 0.17

(EXT-1+57769=EXT-1E) 57769 1 - -
Nature Salt 50EX/LS + pH/PPM (EXT-2) 53820 1 85 0.36

Probe holder included with EXT-2)
Self-cleaning electrodes
Pro-Chlore Salt Serie
A-50EX/EXT-1/EXT-2 60634 1 - -
A-80EX/EXT-1/EXT-2 60636 1 - -
A-120EX/EXT-1/EXT-2 60676 1 - -
A-180EX/EXT-1/EXT-2 60677 1 - -
A-300EX/EXT-1/EXT-2 60678 1 - -
A-600EX/EXT-1/EXT-2 60679 1 - -
Nature Salt Serie
A-50EX/LS/EXT-1/EXT-2 60680 1 - -
A-80EX/LS/EXT-1/EXT-2 60681 1 - -
A-120EX/LS/EXT-1/EXT-2 60682 1 - -
A-180EX/LS/EXT-1/EXT-2 60683 1 - -
A-300EX/LS/EXT-1/EXT-2 60684 1 - -
Easy Salt Serie
EASY SALT 70/EXT-1 60685 1 - -
EASY SALT 90/EXT-1 60686 1 - -
EASY SALT 180/EXT-1 60687 1 - -
Pool Terre
Earth connection for any electrolysis equipment with clamp saddle included.
Other sizes upon special order. Code Standard Standard Standard
For hose 50 mm 25894 1 0.6 0.001

For hose 63 mm 25895 1 0.6 0.001
COMMERCIAL POOL

EQUIPMENT
457
Neolysis Zero Salt x UV
Neolysis, the most advanced treatment by AstralPool: + Sustainability + Disinfection + Innovation + Health.
Advantages:
- Water suitable for hosing down
- Salinity: 2g/L
- Double disinfection: UV + Electrolysis
- Maximum water quality.
Features:
- Maximum capability for chloramine reduction (UV LP + Electrolysis).
- Electrodes in the LS series (4,000-5,000 h) for the private pool range and EX LS series (6,000-8,000 h)
for the public pool range.
- UV LP HO lamps (13,000 h).
- Neolysis Zero Salt x UV. Without maintenance of salt intake.
- Patented Process
New
Neolysis Zero Salt x UV for public pools
Series EX LS electrodes (6.000-8.000 h).
AP 50 Gr/h + UV 75 W 57753 1 - -
AP 80 Gr/h + UV 90 W 57761 1 - -
AP 120 Gr/h + UV 2 x 90 W 57762 1 - -
AP 50 Gr/h + UV 75 W + pH/ORP (EXT-1) 57763 1 - -

AP 80 Gr/h + UV 90 W + pH/ORP (EXT-1) 57764 1 - -
AP 120 Gr/h + UV 2 x 90 W + pH/ORP (EXT-1) 57765 1 - -
(EXT-1+57769=EXT-1E) 57769 1 - -
AP 50 Gr/h + UV 75 W + pH/PPM (EXT-2) 57766 1 - -

AP 80 Gr/h + UV 90 W + pH/PPM (EXT-2) 57767 1 - -
AP 120 Gr/h + UV 2 x 90 W + pH/PPM (EXT-2) 57768 1 - -
Probe holder included in EXT-2
AP NEO Basic AP NEO pH/ORP AP NEO pH/PPM Production Zero Salt Electrolysis + UV
57753 57763 57766 50 gr Cl2 /hr + 75 W UV
57761 57764 57767 80 gr Cl2 /hr + 90 W UV
57762 57765 57768 120 gr Cl2 /hr + 180 W UV
Neolysis Lamps for public pools

Lamp UV LP-20, 75 W 60608 1 0.10 -

(Codes 57753, 57763, 57766)
Lamp UV LP-25, 90 W 60609 1 0.10 -
(Codes 57761, 57764, 57767)
Lamp replacement kit UV LP 2x90 W 60619 1 0.20 -
(Codes 57762, 57765, 57768)
Quartz UV LP-20/25/30
(75 W y 90 W lamps) 60631 1 0.09 -
458
UV automatic disinfection for public pools
AstralPool presents Heliox UV, a new automatic UVC light system, which guarantees double disinfection
through a significant reduction in the amount of chloramines (bound chlorine) along with the neutralisation
of bacteria, viruses and other microorganisms present in water by impeding their reproduction.
The range comprises the Heliox UV LP model for private pools, the Heliox UV MP for public pools.
The advantages of UV-C technology:
UV ray treatment systems are completely automatic, with very low maintenance and running costs. They
also have considerable advantages over other systems:
100% of pool water is treated.
The disinfected water is free of unpleasant smells and does not irritate the eyes, thanks to a drastic reduc
tion in the amount of chloramines.
They save money as fewer chemical products are required.
They are environmentally friendly because:
- Less fresh water is needed (daily water renewal is reduced).
- Fewer waste by-products are formed, resulting in a reduction in subsequent water treatment.
- The UV-C equipment does not add any chemical products to the water.
Heliox-UV operation
UV-C disinfection is a local treatment (UV chamber), which takes place as the water in the pool circulates
through the chamber that contains the UV-C lamps. The accurate delivery of radiation (W UV-C) and resi
dence time in the system ensure the effective neutralisation of 99.9% of microorganisms, as well as the
reduction of chloramines to safe levels (<0.6 ppm).
Heliox UV MP for public pools

Heliox UV MP (medium pressure) systems are designed to be used in public pools. These lamps operate over a
wide spectrum to cover the whole of the UV region (see graph), which makes possible the effective
eradication of chloramines (<0.6 ppm) in the pool water and its efficient disinfection due to the neutralisation
of microorganisms (99.9%), including those resistant to chlorine treatment.
New features
More compact design (UV reactor in AISI-316).
Adjustable to between 70 and 100% of rated power, in 1% increments, by means of a self-cooling electronic ballast.
Fluidra technology (design and manufacture).
Calibrated UV-C radiation sensor (mW/cm2). Precise dose control. Instant power adjustment to process
conditions. Saves energy and extends the lamps lifetime.
Advanced colour touch screen. System menu for browsing process parameters and log files.
Advanced versions:
Embedded web
The control architecture used in Heliox UV PM systems has a number of features that make them reliable,
energy-efficient and scalable to the highest possible level.
The Heliox UV MP systems use two parameters for adjusting the power setting: average radiation and flow. All
models have a rated radiation profile that ensures a dose of 60mJ/cm2. If the flow is lower than the rated value,
the same will apply to the required radiation level and the system reduces the power input, thus optimising
50-450m3/h power consumption and the lamps lifetime. Likewise, if radiation drops due to losses caused by cloudy water,
scaling or lamp emission efficiency, the system will adjust the power so that the right dose is supplied.
Heliox UV MP 50 52200 1 - -
Heliox UV MP 80 52201 1 - -
Heliox UV MP 140 52202 1 - -
Heliox UV MP 300 52203 1 - -
Heliox UV MP 450 52204 1 - -
Heliox UV MP 675 52205 1 - -
For sea water application, contact with AstralPool.
Optional: automatic wash / Auto Wiper, UL NSF versions: UV MP 50AWP to UV MP 450AWP.
Flow N Input Flange DIN2633, Total height

Code Model Rated / UV-C power
(60 mJ/cm2) Lamps voltage in/out (mm) reactor
52200 UV MP 50 50 m3/h 1 0.7 kW / 105 W DN 150 834 273
52201 UV MP 80 80 m3/h 1 1.0 kW / 150 W 230 VAC / DN 150 834 273
52202 UV MP 140 140 m3/h 1 3.0 kW / 450 W 50-60 Hz DN 150 834 273
52203 UV MP 300 300 m3/h 1 3.0 kW / 450 W DN 250 1012 356
52204 UV MP 450 450 m3/h 2 6.0 kW / 900 W 380 VAC / DN 250 1138 356
52205 UV MP 675 675 m3/h 3 9.0 kW / 1350 W 50-60 Hz, DN 300 1218 356
COMMERCIAL POOL
EQUIPMENT
459
UV automatic disinfection
Heliox System UV MP Lamps

Lamp UV MP 50/80 60638 1 0.125 -
(Code 52200, 52201)
Lamp UV MP 140 60639 1 0.255 -
(Code 52202)
Lamp UV MP 300/450/675 60642 1 0.275 -
(Code 52203, 52204, 52205)
Quartz tube case MP 50/80/140 60643 1 0.050 -
Quartz tube case MP 300/450/675 60644 1 0.050 -
Heliox UV LP system for public pools
Heliox UV LP Inox and Heliox UV LP PE (LP = low pressure) systems are designed to be used in public
pools. They act at a wavelength of 254 nm, which is ideal for eliminating microorganisms. They will enable
you to benefit from the latest ultraviolet light technology in the field of water treatment.
New features of LP Inox & LP PE:
Stainless steel and polyethylene versions.
Multi-lamp version.
Fluidra technology (design and manufacturing).
Lamp ON indicator.
Electronic counter for working time and ignitions (lamp lifetime control).
Flowswitch included as standard.
New
Heliox UV LP S.S. for public pools

Heliox UV LP inox 270 W / 90 W (UVC) 60344 1 - -
New
Heliox UV LP PE for public pools

Heliox UV LP PE 270 W / 90 W (UVC) 60348 1 - -
Flow Flow N Rated / UV-C Total

Material Code Model
(30 mJ/cm2) (60 mJ/cm2) lamps power height (mm) reactor
Inox 60344 UV LP 45 45 m3/h 22 m3/h 3 x 90 W 270 / 90 W 1050 204
Inox 60345 UV LP 65 65 m /h3
30 m3/h 4 x 90 W 360 / 120 W 1050 204
Inox 60346 UV LP 85 85 m3/h 37 m3/h 5 x 90 W 450 / 150 W 1050 204
Inox 60347 UV LP 95 95 m /h3
43 m3/h 6 x 90 W 540 / 180 W 1050 204
PE 60348 UV LP P35 35 m3/h 18 m3/h 3 x 90 W 270 / 90 W 1050 200
PE 60349 UV LP P45 45 m3/h 22 m3/h 4 x 90 W 360 / 120 W 1050 200
PE 60354 UV LP P60 60 m3/h 30 m3/h 5 x 90 W 450 / 150 W 1050 250
PE 60358 UV LP P70 70 m /h3
35 m /h
3
6 x 90 W 540 / 180 W 1050 250
460
Automatic regulation and control equipment
New
AP PR-200 - Compatible Electrolysis
The professional choice for control and dosing. The integrated panels based on AP PR Series controllers provide
the best authentically plug&play solution, preassembled on a panel. There are versions to control pH, ORP
and FREE CHLORINE in the water. In addition, they are 100% compatible with saline electrolysis systems.
Our range of controllers provide practically unlimited possibilities, as all our equipment has been designed for
60359 integrated work, such as a single communication protocol. This enables the simple integration of third-party
devices, as it uses the Modbus protocol, one of the most widely used open network protocols on the market.
AP PR-200 equipment is compatible with the Easy Salt, ProChlore Salt and Neolysis ranges.
It is also the recommended professional solution to control several electrolysis systems at the same time with a
single regulator-controller panel (multiple control by means of an optional exVoltage TRI kit).

60361 AP PR-206 pH/ORP 60359 1 - -
AP PR-207 pH/Cl2 PPM 60361 1 - -
AP PR-204 Cl2 PPM 60362 1 - -
Optional: TRI kit multiple control
60362
Smart Control - Compatible Electrolysis

Equipment control and regulation of chemical dosage to residential and public pools. Featuring a stylish and
practical enclosure that houses the electronics and multiparameter sensor pocket camera.
Swing door for easy access to the probes for maintenance and inspection service.
Color touch screen with intuitive navigation menus. Permits from regulatory control settings and professionals
to very advanced version control conditions and more stringent state information. In addition, they are 100%
compatible with saline electrolysis systems.
Smart Control equipment is compatible with the Easy Salt, ProChlore Salt and Neolysis ranges.
Smart Control pH/ORP 54523 1 - -
Smart Control pH/Cl2 PPM 54524 1 - -
Smart Control pH/ORP/Cl2 PPM 54525 1 - -
54523 Included: Pre-filter kit (80 micrometres), sampler, input and output for probe holder.
Smart Control pH/ORP Smart Control pH/Cl2 Smart Control pH/ORP/Cl2

Sensors pH pH pH
ORP (mV) Cl2 ppm (potenciosttica ORP (mV)
54524 Conduct./Temp 3-electrodos) Cl2 ppm (potenciosttica 3-electrodos)
Conduct. / Temp. Conduct. / Temp.
Inputs 2 x deposit level detector (pH, ORP, Cl2). Sensor not included.
Inductive flow Detector
Outputs 2 x Output 4-20 mA (pH, ORP/Cl2)
2 x Pulse Output (pH, ORP/Cl2)
8 x relay output (pH, ORP, Cl2, temperature, 3 x programmable timings, flow, alarm)
54525 Communications USB, Modbus

Historicals 20 days: Graphical representation on the screen or USD download (pH, ORP, Cl2, T(C), Cond)
Features TFT color touch - Intuitive menus - Enclosure protection - Door access probes -
- Time clock with battery - Transparent probe holder with status indication light -
Intelligent Dosing Function - PumpStop Function
COMMERCIAL POOL

EQUIPMENT
461
Amperometric Chlorine Sensors

60645
Free Chlorine Sensor 60645 1 0.22 -
ECC1 Electrolyte / Gel for Organic Chlorine Sensor 60646 1 0.07 -
Membrane for CL.01.02 Inorganic Chlorine Sensor 60647 1 0.02 -
60646
60647
pH / ORP Sensors

60648
pH combined electrode 60648 1 0.20 -
OPR electrode 60649 1 0.20 -
60649
Calibration Solutions

60618
Buffer solution pH 7.0 125 M/L (Green) 60618 1 0.053 -
Buffer solution pH 4.0 126 M/L (Red) 60632 1 0.058
Calibration solution 470 mV 60633 1 0.060 -
60632
60633
462
Pool Patrol
The Colorimetric controller unit gives a reply to the demand of the Swimming Pool Market requiring com
pact, easy and low maintenance device, with IP65 enclosure. The available measures are: Free Chlorine
(DPD1), pH, Redox (ORP), Temperature. Thanks to its internal graphic display it is possible to have all
measures displayed at the same time. The Plastic Cover assures an easy accessibility to the hydraulic part.
Includes: Measuring instrument, flow detector by temperature, pH sensor, ORP sensor, pH calibration solu
tions, ORP calibration solutions and DPD2 bottle.
Pool Patrol 54527 1 - -
New
Controller
Automatic pH, Redox and free Chlorine regulation equipment.
-- 8 x 12 mm Standard connections.
- Air vent purge at the entrance.
- 80 micron filter integrated.
- New reed flow proximity sensor, avoiding overdoses when the flow decreases.
- Integrated support for sensors.
- Adjustable flow valve and valve for water samples.
- 4-20 mA outlet for external registration.
- Adjustable frequency output 0-120 imp/min.
- Automatic temperature compensation.
Controller pH/Redox/serial Port
Includes:
-- pH + Redox electrodes + Temperature sensor (PT100)
-- Buffer solutions kit
-- Does not include dosing pump nor electric valve for tablets dosage.
Controller pH/Cl/serial Port
Includes:
-- pH + Chlorine electrodes + Temperature sensor (PT100)
Controller pH/Cl/Redox/serial Port
Includes:
-- pH + Redox + Chlorine electrodes + Temperature sensor (PT100)
Does not include dosing pump nor electric valve for tablets dosage
Controller Cl/serial Port
Includes:
-- Chlorine electrode + Temperature sensor (PT100)

Controller pH/Redox/serial Port 57141 1 - -

Controller pH/Cl/serial Port 57142 1 - -
Controller pH/Cl/Redox/serial Port 57143 1 - -
Controller Cl/serial Port 57144 1 - -
COMMERCIAL POOL

EQUIPMENT
463
Installation diagram for organic Chlorine or Bromine
swimming pool
filter
floculacin no-stop
heat exchanger
dosage
pumps
dispenser
pump Cl / Br
flocculant unit
safety
motor driven
balance tank valve valve
pH corrector
flocculant
waste water
Installation diagram for Inorganic Chlorine
swimming pool
filter
non stop flocculation
heat exchanger
dosage pumps
pump
flocculant unit
balance tank
Chlorine pH corrector
flocculant
464
Cobra Curtain
Height: 1.2 m. Width 600 mm. Stainless Steel AISI-316.
Matt finish 19972 1 23.2 0.630

Painted in white 19973 1 23.2 0.630
Boa Curtain
Height: 1.2 m. Width 340 mm. Stainless Steel AISI-316.
Bright polished 19974 1 11.2 0.278
Luxe Curtain
Height: 0.9 m. Stainless Steel AISI-316.
Bright polished 19975 1 60.0 0.547
Arched Curtain
Stainless Steel AISI-316 matt finish.
Width 600 mm, Height 800 mm 20129 1 34.1 0.247

Width 600 mm, Height1000 mm 20130 1 62.0 0.547
Width 1000 mm, Height 1000 mm 20131 1 106.5 1.044
19972-19973 19974 19975 20129 20130 20131

Water feature Base
code cover Concrete Concrete Liner
Switch Concrete Liner
19972 19981 19983 19987 x 3 20091 x 3 38780 19990 07537 07867
19973 19982 19983 19987 x 3 20091 x 3 38780 19990 07537 07867
19974 19977 19983 19987 x 2 20091 x 2 38776 19989 17154 17155
19975 19985 19987 x 3 20091 x 3 38780 19990 07537 07867
20129 19985 19987 x 3 20091 x 3 38780 19990 07537 07867
20130 19985 19987 x 3 20091 x 3 38780 19990 07537 07867
20131 20135 19987 x 3 20091 x 3 38780 19990 07537 07867
COMMERCIAL POOL
EQUIPMENT
465
Swan Curtain 450

198
198
Matt finish 34387 1 27.7 0.356
Painted in Blue Ral 5002 34388 1 27.7 0.356
Painted in Orange Ral 2010 248 34389
248 1 27.7 0.356
533 533
717 717 450 450
1000
1000
939
939
198
248
533
506 506 717 450
Swan Curtaine 1000
1000
939
248
248

CDIGO ACABADO
CDIGO ACABADO
Matt finish 34387 34390
SATINADO
34387 1
SATINADO 38.2 0.872
1100 1100
Painted in Blue Ral 5002 34388 34391
AZUL
34388 AZUL1 38.2 0.872
Painted in Orange Ral 2010 34389 NARANJA
34389
34392 NARANJA
1 38.2 0.872
506
870 870 1000 1000
802
802
736
736
248
CDIGO ACABADO
34387 SATINADO1100
34388 AZUL
655 655 34389 NARANJA
870 1000

Water feature
code
802
Concrete Concrete Liner

736

34387
34388 19983 19987 x 2 20091 x 2CDIGO 38776
CDIGOACABADO 19989
ACABADO 17154 17155
34389 34390 34390 SATINADO
SATINADO
34391 34391 AZUL AZUL
34390 655 34392 34392 NARANJA
NARANJA
34391 20135 19987 x 3 20091 x 3 38780 19990 07537 07867

34392
466
Cannons
In AISI-316 Stainless Steel. (pipe only, without nozzles). Pipe: 50 mm. Height 1.2 m.
19968 1 7.2 0.193
Interchangeable nozzles

Nozzle No 1 05572 1 0.66 0.003
Nozzle No 2 05573 1 0.46 0.003
Nozzle No 3 05574 1 0.56 0.003
Nozzle No 4 05575 1 0.81 0.003
Vertical
In polished AISI-316 Stainless Steel. Pipe: 84 mm. Height 1.5 m.
Single 19969 1 10 0.080

COMMERCIAL POOL
EQUIPMENT
467
Bell
In Stainless Steel AISI-316. Pipe: 63 mm. Height 1.2 m.
19971 1 9.2 0.274
Deluxe Cannon
Stainless Steel polished AISI-316. Pipe: 63 mm. Height: 0.8 mm.
Flat 19970 1 8.2 0.211
Circular 20132 1 9.4 0.209
6 outlets 20133 1 8.6 0.213
Vista desde A
19968 19969 19971 19970-20132-20133

Water feature Base
code cover Cement Cement Liner
switch Cement Liner
19968 19976 19983 19987 x 1 20091 x 1 38770 19988 07669 07868
19969 19978 19983 19987 x 1 20091 x 1 38770 19988 07669 07868
19970 19983 19987 x 1 20091 x 1 38770 19988 07669 07868
19971 19977 19983 19987 x 2 20091 x 2 38776 19989 17154 17155
20132 19983 19987 x 1 20091 x 1 38770 19988 07669 07868
20133 19983 19987 x 1 20091 x 1 38770 19988 07669 07868
468
Mushrooms
In AISI-316 Stainless Steel polished Column 129 mm. Height 2.3 m.
Mushroom 285 mm 19966 1 24.8 0.273
Base cover
O-ring Code 19979 (Optional)
2300
Pipework 75
Ext. 21/2" BSP M/T
Anchor detail
197 Suction port
Connec. 21/2" W BSP
150
Pump 2.2 kW 400 V 3~
Flow 34 m3/h 10 m.w.h.
142

Feature Base
2300

code cover Concrete Liner Concrete Liner
19966 19979 19983 15833 19987 x 3 20091 x 3 38780 19990 07537 07867
Note: The pneumatic press button includes: control
197 box, wall conduits and press button.
150
Umbrellas
142
In AISI-316 Stainless Steel polished column. Umbrella in fiberglass.

Umbrella, 1100 mm 22750 1 30.0 0.450

Umbrella, 1500 mm 22751 1 85.0 1.900
Umbrella, 2000 mm 22752 1 110.0 2.400
Umbrella, 2500 mm 22753 1 130.0 3.500
Column 129 mm 22754 1 23.4 0.274
Column 254 mm 22755 1 55.8 0.507
2200
O-ring Base cover

Code 19979 (Optional)
197
150
2200
Pipework 75
142
Ext. 21/2" BSP M/T
Anchor detail
197 Suction port
Connec. 21/2" W BSP
Pump 2.2 kW 400 V 3~ 150
Flow 34 m3/h 10 m.c.a.
142

Umbrella Base
Top Column Pump Manual Pneumatic press button
cover Concrete Liner Concrete Liner
1100 22750 22754 19979 19983 15833 19987 x 3 20091 x 3 38780 19990 07537 07867
1500 22751 22755 19980 19984 19986 19987 x 4 20091 x 4 08003 19991
2000 22752 22755 19980 19984 19986 19987 x 4 20091 x 4 08003 19991
2500 22753 22755 19980 19984 19986 19987 x 5 20091 x 5 08004 19992
COMMERCIAL POOL
EQUIPMENT
469
Water Mushroom 250 mm

Made of AISI-316. It has been designed for installing in prefab. and concrete pools. Column 104 mm.
Height 385 mm
Matt finish 34378 1 5.4 0.34
Painted Blue Ral 5002 34379 1 5.4 0.34
Painted Orange Ral 2010 34380 1 5.4 0.34

Height 460 mm.
Matt finish 34381 1 9.6 0.124
Painted Blue Ral 5002 34382 1 9.6 0.124

Height 600 mm.
Matt finish 34384 1 24.5 0.377
Painted Blue Ral 5002 34385 1 24.5 0.377
E
D
F
C
A
Suction
B
R. int. 21/2 W BSP

285
~500
150 Pipe 50 mm
Pump 0.45 kW 400 V 3~
Dimensions in mm Anchoring Suction Control Box

Feature
D Pump Manual Pneumatic press button
A B C E F Code Concrete Liner Concrete Liner
Mushroom switch Concrete Liner
34378
250 385 104 5000 1500 34379
34380
34381
400 460 270 129 6600 1700 34382 19983 15833 19987x1 20091x1 38770 19988 07669 07868
34383
34384
670 600 168 7000 1800 34385
34386
Note: The pneumatic press button includes: control box, wall conduits and press button.
470
Concrete pool wall suction point

In AISI-316 Stainless Steel. 285 mm. Suction point for water features.Connection 11/2". Max. recommended
flow: 13 m3/h.
Concrete pool 19987 1 2.9 0.018
Prefabricated and liner pool wall suction point

In AISI-316 Stainless Steel. 285 mm. Suction point for water features. Connection 21/2". Max. recom
mended flow: 13 m3/h.
Prefabricated and liner pool 20091 1 2.9 0.018
Anchoring for concrete pools

In AISI-316 Stainless Steel. Includes base for embedding, screws, washers and earth connection. Connection
21/2 BSP.
Rectangular anchoring 19983 1 2.1 0.012
254 mm anchoring 19984 1 9.8 0.113
600 mm wide anchoring 19985 1 6.4 0.039
1000 mm wide anchoring 20135 1 10.8 0.076
Anchoring for liner pools

In AISI-316 Stainless Steel. Includes base for embedding, fixing plate, 3 gaskets and earth connection. Con
nection 21/2".
Rectangular anchoring 15833 1 2.5 0.007
254 mm anchoring 19986 1 11.0 0.400
15833
COMMERCIAL POOL
EQUIPMENT
19986
471
Base cover
In polished AISI-316 Stainless Steel 51 mm.
For cannon 19976 1 1.0 0.008
Base cover

Polished, 63 mm 19977 1 1.0 0.008
Base cover

Polished, 84 mm 19978 1 0.9 0.006
Base covers

Polished, 129 mm 19979 1 0.9 0.005
Base cover

Polished, 254 mm 19980 1 0.9 0.006
472
Base cover

For 600 mm curtain. Matt finish 19981 1 1.22 0.008
Base cover

For 600 mm curtain. Painted 19982 1 1.28 0.008
Manual - control panel

Manual - control box
0.45 kW (0.5 HP) 400 V III 19988 1 0.7 0.005
1.1 kW (1.5 HP) 400 V III 19989 1 0.7 0.005
2.2 kW (3.0 HP) 400 V III 19990 1 0.7 0.005
2.65 kW (3.5 HP) 400 V III 19991 1 0.7 0.005

Control box with pneumatic switch for water games

Allows bathers to control water features from inside the pool. Includes wall conduit, air tube and pneumatic
press button.
For concrete pool
2.2 kW (3.0 HP) 400 V III 07537 1 3.1 0.02
0.45 kW (0.5 HP) 400 V III 07669 1 3.1 0.02
1.1 kW (1.5 HP) 400 V III 17154 1 3.1 0.02
For prefabricated pool
2.2 kW (3.0 HP) 400 V III 07867 1 3.2 0.02
0.45 kW (0.5 HP) 400 V III 07868 1 3.2 0.02
1.1 kW (1.5 HP) 400 V III 17155 1 3.2 0.02
COMMERCIAL POOL
EQUIPMENT
473
False start post indicator
Backstroke turn indicators
Float lines
474
LOCATION OF THE VARIOUS EQUIPMENT USED IN COMPETITION POOLS
Ladder Starting platforms Grating for pool overflow Turning panel with supports
Anchoring is included Starting blocks for competition pools
BCN03 Starting blocks

The BCN03 Starting block, developed and patented by AstralPool for the FINA Swimming World Champion
ships held in Barcelona in 2003, introduces side grip bars and allows the swimmer to adjust the angle of the
block* manually. They can choose the angle most suitable from the available 0, 3, 6 and 10.
* The regulations of the International Swimming Federation (FINA) (FR2.7) allow an angle between 0 and 10
on the starting block. So far, all the starting blocks available in the market have consisted of a fixed unadjust
able platform.
The starting block is manufactured using AISI-316 Stainless Steel. The standard starting platform can be
dismantled to enable assembly of the Omega electronic timing system. It can also be adapted to other timing
6
30
30
systems under request. The platform is 550 mm long x 500 mm wide, with a polished finish, and 437 mm
6
30
30
high. Ideal for installation in a swimming pool with side walls. Code 54460 podium fixing is not included with
the product supplied.
437

Mi n 500 - Max 750
437
20 20 230 400
Mi n 500 - Max 751052
250
20 20 230 400
152
250
161 100
BCN03 Block manual adjustment
184
161 100 and fixed side handles 28761 1 48.8 0.237

184
Fixed BCN03 Eco podium

without side handles 28760 1 40.4 0.237
Note: Eco versions are fixed at 6
550
6
30
30
120 260
550
120 260
437
Mi n 500 - Max 750
20 20 400
576
500
576 200
230
152
250
500
200
32 0
0 17
161 100
184
32 0
0 17
PLANT VIEW
(Codes 28761, 28760 y 32700)
28760
10
6
30 30 3
0 10
6
30 30 3
0
380
437
Mi n 500 - Max 750
380
437
Mi n 500 - Max117650
20 20 400
230
250
20 20 400
116
230
250
161 100
184
161 100
184
28761 32700
COMMERCIAL POOL
EQUIPMENT
475
Starting blocks for competition pools
Starting blocks
Base in S.S. AISI-316. Adjustable platform in polyester & fibreglass with non-slip finish 500 mm x 500 mm.
Number sequence not included. Plate anchoring for starting block in AISI-316 code 54461 not included.
Packaging
Packing Weight
Weight
Kg Volume m3
POLISHED FINISH:
Height 700 mm 00144 1 32.0 0.36
Height 400 mm 00145 1 25.3 0.18
IN WHITE EPOXY PAINT:
Height 400 mm 19957 1 25.3 0.18
00144 00145
Starting blocks
Made in S.S. AISI-304. Platform in Polyester and fibreglass with non-slip finish 500 mm x 500 mm. Number
sequence not included.
POLISHED FINISH:
Height 700 mm 00146 1 25.0 0.48
Height 400 mm 27578 1 18.0 0.11
IN WHITE EPOXY PAINT:
Height 700 mm 19958 1 25.0 0.48
Height 400 mm 27836 1 - -
00146 27578
Note: The 00146 platform
can be manufactured, made
to order, for adapting it to 43
overflow level. In this case
the distance L must be pro
vided.
Notes:
Codes 00146 and 19958: Tube anchoring for starting block in AISI-304 code 00143 not included.
Codes 27578 and 27836: Tube anchoring for starting block in AISI-304 code 54462 not included.
476
Headwalls for competition pools
Headwall for podiums

AstralPool has created a headwall that allows starting blocks to be attached. This addition extends our range
of products for competition. The item consists of an AISI-304 Stainless Steel structure and plastic grating.
The platform can also be used as a turning panel and includes anchors for float lines.
Headwall, lane width 2 m 34213 1 - -

Headwall, lane width 2.5 m 34214 1 - -
Headwall, right corner 34215 1 - -
Headwall, left corner 34216 1 - -
Podiums fixing
Anchoring for installation the podiums in concret, made in Stainless Steel AISI-304/316, composed by in-
ground base, bolts and washers, with connection to the equipotencial circuit.
Competition podium fixing, made in AISI-316 54460 1 2.4 0.02
Fixing for the podium with rectangular feed,
made in AISI-316 54461 1 3.5 0.02
Fixing for the podium with tube feed,
made in AISI-304 54462 1 2.4 0.02
Starting blocks numbers

4 units of each supplied.
Height 80 mm
(For podiums 00146-27578-19958-27836)
For starting blocks from 1 to 6 28616 1 - -
For starting blocks from 1 to 10 28617 1 - -
Height 100 mm
Height Height (For podiums 00144-00145-19956-19957-
80 mm 100 mm -28760-28761-32700)
For starting blocks BCN03 from 1 to 6 34200 1 0.1 0.001
For starting blocks BCN03 from 1 to 10 34201 1 0.1 0.001
COMMERCIAL POOL
EQUIPMENT
477
Lane ropes
BCN03 Lane rope

Developed and patented by AstralPool for the 2003 Swimming World Championships, the BCN03 Lane rope
model is a significant technological breakthrough in competition swimming pools as it obtains maximum ab
sorption of the waves created by swimmers, helping the water surface to be as flat as possible.
Biomechanical tests results carried out by the Applied Hydrodynamics Institute (INHA) in July 2003:
- the BCN03 lane ropes reduce waves inside the lanes by 80%. As a result, the wave caused by a swimmer
when swimming is practically absorbed, without causing noticeable reflection effects.
- the new floats absorb up to 50% more waves than the conventional ones. Each lane of the swimming pool
Competition Model is least affected by the adjacent lane.
Operation:
Each float has an interior mechanism consisting of 24 turbines distributed on six shafts. The wave of water
makes the turbines turn, converting the kinetic energy into mechanical energy, which is then dissipated by
friction, thus preventing it from continuing into the next lane. Each turbine can turn freely on its axis and the
entire float unit can also rotate around the cable.
Technical features:
The outer shell is manufactured in two technical plastic parts, built to prevent swimmers hurting themselves
on colliding with it. The inner parts are made of polythene and polypropylene. Colours available: white, blue,
red and green.
The same float unit is available in an Eco version, which has the same shell appearance and the same colours
but without the inner turbine mechanism.
The lane ropes are supplied with float units and Stainless Steel 6 mm cable (code 28808) and hook (code
Eco Model
00208).
Note: The colour of the lane rope does not correspond to FINA standard colors.
Conventional float line BCN03 float line
Swell that crosses over into the adjacent lane Swell that crosses over into the adjacent lane 50% less
than in conventional ones
Swell that stays within the lane 80% less than in con-
Swell that stays within the lane ventional ones, furthermore reducing the dissipation time
1.1 sec.
Swell that crosses over into the adjacent lane Swell that crosses over into the adjacent lane 50% less
than in conventional ones
8
fl14
231
fl 148
Side view Section

Front view
478
The lane ropes are supplied Lane ropes

with floats, polyester cord
(00210) and hook (00207).
BCN03 Competition lane rope model

The lane ropes are supplied with float units, Stainless Steel 6 mm cable (28808) and hook (00207). Floats
with inner turbine mechanism.
25 m length 28802 1 - -
50 m length 28804 1 - -
BCN03 Eco lane rope model

The lane ropes are supplied with float units, Stainless Steel 6 mm cable (28808) and hook (00207). Floats
without inner turbine mechanism.
25 m length 28803 1 - -
50 m length 28805 1 - -
Code L (m) A (m) cable Nr. of blue BCN03 floats Nr. of red BCN03 floats
28802 25 30 44 64
28804 50 60 44 172
28803 25 30 44 64
28805 50 60 44 172
Other colors in acordance with the rules of the FINA availables.
Sydney model
New lane rape model made by 148 mm. Floats in accordance with the rules of the International Swimming
Federation (FINA), and the FR 3 swimming pools for the Olympic Games or World Championships regulations.
The lane ropes are supplied with floats, Stainless Steel cord of 6 mm (28808) and hook (00207).
25 m lenght
Sydney lane ropes 25M Blue-Red 54475 32 3.20 0.068
Sydney lane ropes 25M Green-Red 54476 32 3.20 0.068
Sydney lane ropes 25M Yellow-Red 54477 32 3.20 0.068
Sydney lane ropes 25M White-Red 54478 32 3.20 0.068
50 m lenght
Sydney lane ropes 50M Blue - Red 54479 32 3.20 0.068
Sydney lane ropes 50M Green-Red 54481 32 3.20 0.068
Sydney lane ropes 50M Yellow - Red 54576 32 3.20 0.068
Sydney lane ropes 50M White - Red 54577 32 3.20 0.068
COMMERCIAL POOL
EQUIPMENT
479

(00210) and hook (00207).
Roma Model

25 m length 00181 1 9.0 0.200
50 m length 00183 1 16.0 0.620
Code L (m) A (m) cable Nr. of orange Rome floats Nr. of white Rome floats
00181 25 27 232 318

00183 50 52 232 868
92 Model

25 m length 00184 1 9.0 0.200
50 m length 00186 1 16.0 0.620
Code L (m) A (m) cable Nr. of orange 92 floats Nr. of white 92 floats
00184 25 27 152 229

00186 50 52 152 612
480

(00210) and hook (00207).
Moscow Model

25 m length 00190 1 9.0 0.200
50 m length 00192 1 16.0 0.620
A (m) Nr. of orange Nr. of orange Nr. of white Nr. of white Rome
Code L (m)
cuerda Moscow floats Rome floats Moscow floats floats
00190 25 27 192 96 286 143
00192 50 52 192 96 756 378
Montreal model

25 m length 00193 1 19.0 0.340
50 m length 00195 1 39.0 0.680
NOTE: It is possible to supply any

length, colour combination and
rope material under request.
Code L (m) A (m) cable Nr. of orange Montreal floats Nr. of white Montreal floats
00193 25 27 38 55
00195 50 52 38 149
COMMERCIAL POOL
EQUIPMENT
481
Lane ropes
Seoul Model

25 m length 00196 1 28.0 0.340
50 m length 00198 1 50.0 0.620
A (m) Nr. of orange Nr. of white Nr. of white Nr. of orange

Code L (m)
cable Seoul floats Rome floats Seoul floats Rome floats
00196 25 27 178 178 268 269
00198 50 52 178 178 714 715
Barcelona model

25 m length 00199 1 40.0 0.340
50 m length 00201 1 78.0 0.680
Nr. of orange Nr. of white 92 Nr. of white Nr. of orange

Code L (m) A (m) cable
Barcelona floats floats Barcelona floats 92 floats
00199 25 27 60 62 91 90
00201 50 52 60 62 242 241
France model

25 m length 00202 1 40.0 0.340
50 m length 00204 1 78.0 0.680
NOTE: It is possible to supply any

length, colour combination and
rope material under request.
A (m) Nr. of orange Nr. of white Nr. of orange Nr. of white Nr. of orange Nr. of white
Code L (m)
cable France floats Moscow floats Rome floats France floats Moscow floats Rome floats
00202 25 27 62 182 91 92 120 60
00204 50 52 62 486 243 243 120 60
482
Floats
BCN03 Model
Supplied with inner turbine mechanism.
Colour white 28204 - - -

green 28425 - - -
blue 28423 - - -
red 28424 - - -
BCN03 Eco model

Supplied without inner turbine mechanism.
Colour white 28798 - - -

green 28801 - - -
blue 28799 - - -
red 28800 - - -
Rome model

Colour white 00149 500 7.0 0.110
orange 00150 500 7.0 0.110
blue 00151 500 7.0 0.110
red 00152 500 7.0 0.110
92 model

Colour white 00153 140 3.0 0.070
orange 00154 140 3.0 0.070
blue 00155 140 3.0 0.070
red 00156 140 3.0 0.070
Moscow model

Colour white 00161 150 7.0 0.070
orange 00162 150 7.0 0.070
blue 00163 150 7.0 0.070
red 00164 150 7.0 0.070
COMMERCIAL POOL
EQUIPMENT
483
Floats
Montreal model

Colour white 00165 28 7.0 0.070
orange 00166 28 7.0 0.070
blue 00167 28 7.0 0.070
red 00168 28 7.0 0.070
Seoul model

Colour white 00169 200 8.0 0.070
orange 00170 200 8.0 0.070
blue 00171 200 8.0 0.070
red 00172 200 8.0 0.070
Barcelona model

Colour white 00173 45 10.0 0.070
orange 00174 45 10.0 0.070
blue 00175 45 10.0 0.070
red 00176 45 10.0 0.070
France model

Colour white 00177 100 5.5 0.070
orange 00178 100 5.5 0.070
blue 00179 100 5.5 0.070
red 00180 100 5.5 0.070
484
Lane rope storage equipment
BCN03 Lane rope storage basket

A new trolley designed to transport and store the BCN03 Lane ropes after use in the swimming pool. The
BCN03 lane rope storage basket is manufactured of AISI-316 Stainless Steel and includes a PVC bag for col
lecting excess water from the float lines. Due to the bag's bottom outlets, it is emptied in a controlled manner
with no water spillage. The trolley has four castor wheels for maximum mobility. Two of these fitted with brakes.
It can store a lane rope up to 50 m long (or 2 of 25) and can be used for all lane rope models.
28623 1 55.0 0.389
3/4" purge valve
New
Lane rope roller
Made in Stainless Steel AISI-304, fitted with a large wheel for operation. It is mounted on 4 castor wheels for
easy handling. Two of these are fitted with brakes.
Width 1.2 m 58860 1 36.8 0.50

Width 1.8 m 58859 1 46.3 0.54
Number of lane rope collected

1.2 m 1.8 m
Model
25 m 33 m 50 m 25 m 33 m 50 m
ROME 8 6 4 12 9 6
92 8 6 4 12 9 6
MOSCOW 4 2 2 6 3 3
MONTREAL 4 4 2 6 6 3
Seoul 4 2 2 6 3 3
BARCELONA 4 4 2 6 6 3
Code A B C D E F G H
FRANCE 4 4 2 6 6 3
58860 1484 1135 974
1175 685 980 924 1130
58859 2036 1687 1526
Under deck lane rope storage system

Made of AISI-316, allows the storage of the float lines beneath the deck. The float line box is embedded in
the pool surround and holds the retractable reel over which the float line slides into the hole. This unit can be
complemented with a lane rope collecting bag if required.
15842 1 12.8 0.08
COMMERCIAL POOL
EQUIPMENT
485
Lane rope accessories
Zurich/Wiesbaden Finnish type installation diagram Standard installation diagram

installation diagram
Anchor code 00141 Anchor code 00142 Anchoring cup code 09206
Lane rope support code 00140 Lane rope support code 00140 code 09207
code 00205
code 00206
Lane rope anchor

Made in Stainless Steel AISI-316. To use with anchoring fixture 00141 and 00142.
00140 2 0.63 0.003
Concrete anchoring cup with central rod

Made in Stainless Steel AISI-316.
For concrete pool 09206 1 0.4 0.001
Anchoring cup with central rod

For pre-fabricated pools 09207 1 0.5 0.001
with flange, gasket and screws
Retractable anchoring cup

For concrete pool
with a retractable hook 00205 1 0.46 0.001
486
Retractable anchoring cup

For prefabricated pools 00206 1 0.6 0.001
with flange, gaskets and screws
Lane rope ratchet

Chrome plated brass.
00208 1 0.97 0.002
Lane rope ratchet

00209 1 0.2 0.001
Lane rope spring

Made in Stainless Steel AISI-304 with plate to attach cable.
01468 1 0.62 0.002
Lane rope hook

00207 100 5 0.01
COMMERCIAL POOL
EQUIPMENT
487
Cords and cables

Polyester 7 mm 00210 110 m 2.0 0.090
Stainless Steel AISI-316
4 x 6 mm with plastic coating DIN 3055 00211 - 0.1 0.001
BCN03 cable Stainless Steel
6 mm without plastic coating 28808 - - -
Indicators
False start indicators

Please indicate pool width when placing your order.
Comprises 2 posts in S.S. AISI-316 (one with pully and quick release cord). Height 1.8 m. Anchoring socket
not included.
False start posts:
- Pool width up to 21 m
43 mm pipe for use with
anchoring sockets 00141 and 00142 19950 1 5.6 0.01
- Pool width over 21 m
False start floats:
Polyester cord and floats 19954 1 - -
Backstroke turn indicators

Please indicate pool width when placing your order.
Comprises 4 posts in Stainless Steel AISI-316. Height 1.8 m. Anchoring sockets not included.
Backstroke turn indicator posts

- Pool width up to 21 m
43 mm pipe for use with anchoring
sockets 00141 and 00142 19952 1 11.2 0.03
- Pool width over 21 m
Backstroke turn indicator bunting
2 Polyester cord and bunting 19955 1 - -
488
Turning panels
Turning panels
In Stainless Steel AISI-316 with plastic lattice screen. Height 300 mm. Fixing support (00139) is not in
cluded.
Lane width 2 m 00137 1 13.6 0.040
Lane width 2.5 m 00138 1 16.5 0.051
Fixing support for turning panels

In Stainless Steel AISI-316 for use with anchoring sockets 00141 and 00142. Please indicate dimension H,
L and type of overflow when ordering.
00139 1 4.0 0.054
Anchoring details when

MEASUREMENT L IS LESS THAN 500 mm.
Anchoring details when

MEASUREMENT L IS OVER 500 mm.
COMMERCIAL POOL
EQUIPMENT
489
Anchoring sockets
Horizontal flange anchoring sockets

Zurich-Wiesbaden. In S.S. AISI-316.
For pipe 43 mm 00141 2 1.17 0.002

For pipe 48 mm 19960 2 1.3 0.002
Angled flange anchoring socket

Finnish. In S.S. AISI-316.
For pipe 43 mm 00142 2 1.13 0.002

For pipe 48 mm 19961 2 1.26 0.002
Anchoring socket with locking bolts

With bolts. In S.S. AISI-316.
00143 2 1.47 0.003
Code 00141 Code 00142 Code 00143

Code 19960 Code 19961
490
Movable wall
Movable wall
AstralPool has made available the technology that allows a single pool to be devided into two different pools for
different uses. With this system, pool space and versatility, and therefore profitability is optimised, resulting
in lower installation costs. The AstralPool system is easily adaptable and can be used in both new and existing
pools. Recommended for Olympic swimming pools 25 x 50 x 2 metres.
AstralPool has developed a patented movable wall system, based around a modular design which offers one
significant advantage above all others; versatility. The partial removal of these modular panels allows the full
length of the pool to be used, should that be required.
Made in Stainless Steel AISI-304 and covered with white coloured non-slip sheets.
Technical features:
NET WEIGHT 8000 kg (Pool width 25 m)

MAXIMUM LOAD 200 kg / m2
MOVEMENT By S.S. rails embedded on pool sides.

TRACTION By cables from both pool walls.
OPERATION By a drum with double wound cable option: Manual operation.
POWER HP
STRUCTURE Module of beams and lattice work of S.S. AISI-304.
Manufactured on order. Please, enquire.
Installations pictures: Movable wall in Ashgabat (Turkmenistan)
COMMERCIAL POOL
EQUIPMENT
491
Inox Spaecial Pools
SPCIAL INOX pools Hypnotic pools
492
Centre Wellness Inu (Andorra)
Arquitecto: Jean-Michel Ruols
Only Fluidra, with more than 40 years experience and presence Advantages of a SPCIAL INOX pool:
worldwide, could become the new leader in the manufacture of Long-lasting: a long-lasting swimming pool
stainless steel swimming pools, with its brand SPCIAL INOX. Watertight: no leaks
Adaptability: we convert the pool that you imagine into
Much more than swimming pools, they provide experiences that a project without limits
surprise due to their high quality and aesthetics. Turnkey solutions Cleanliness: dirt is prevented
are available both for residential and public use (hotels, sports Sustainability: the steel is 100% recyclable
clubs, spas, etc.). Elegance: unique finishes
Place your trust in SPCIAL INOX. We will create the swimming pool of your life for all your life.
GUARANTEED FOR UP TO 20 YEARS.
Customised, integrated solutions adapted to your needs

and to your imagination.
Hypnotic pools.
Request the new Spaecial brochure by AstraPool

Folleto presentacio 2013 v9B.indd 1 10/06/13 9:52
www.astralpool.com
www.idrania.com www.cepex.com
The pool brand

Our products are found in over 170 countries. We have
over 40 years of experience. Over 40,000 professionals
and 2,000,000 pools use one of our 15,000 products.
Completely innovative and sustainable solutions. For all of
these reasons and many more, our systems and components
for public and private pools are and will continue to be
leaders the world over.
We set the benchmark for professionals and private

home owners. Let AstralPool surprise you once again.
And remember: when you see our brand, you are looking
at the pool brand.
... for infinite, unique people

Pools for relaxing

Pools for relaxing

Printed on paper from sustainable forests. Fluidra collaborates on the environmental protection.
Impreso en papel procedente de bosques sostenibles. Fluidra colabora en la proteccin del medio ambiente.
2014 -2015
CATALOGUE
FLUIDRA, S.A.
Avda. Francesc Maci, 60 Planta 20
Tel. +34 93 724 39 00
Fax +34 93 724 29 29
[email protected]
www.astralpool.com
CATALOGUE 2014 -2015


Catalogue 2014 Eng Aquachem

Uploaded by

Copyright:

Available Formats

Catalogue 2014 Eng Aquachem

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogue 2014 Eng Aquachem

Uploaded by

Copyright:

Available Formats

2014 -2015

CATALOGUE 2014 -2015

Pools for sharing emotions

Eco-friendly pools for staying green

Pools for relaxing

Pools for keeping fit

We set the benchmark for professionals and private

... for infinite, unique people

LED RBG 1.11 technology with remote control

Electronic pool cleaner

Electronic pool cleaner

Active Clear Glass

Smart control panel Electrolysis for public pools:

The first step for

GPIO Regulation device and controller

AstralPool is a member of the MODBUS Organization Inc.

LED lighting Variable speed pump

Pre-filter Glass media

AstralPool Mac Simple details for

Heat pump configurator

VIRON energy efficiency

Australia, Austria, Belgium,

Products: Trademark sold in: Customers:

Debido a las constantes modificaciones

Product ranges in line with the latest market

Marketing tools for attracting footfall to your store.

We have Official Partners in 12 countries

Assistance in increasing and

Special benefits and advantages.

Pipe dimensions and water flow

1 Filter 7 Automatic pool cleaner 13 Chlorine dispenser

Filter and pump selection table

Pool volume Turnover Filtration speed Filter Connections Pump Sand

40 8 50 350 50 11/2 0.3 40

L a mLampsp sfor halogen

POOL SHELL EQUIPMENT

WATER TREATMENT PRODUCTS

DOSING AND CONTROL EQUIPMENT

POOL CLEANING EQUIPMENT

POOL LINERS AND LINING MATERIAL

POOL COVERS AND ROLLERS

PVC FITTINGS AND ACCESSORIES

SPAS AND SAUNAS

COMMERCIAL POOL EQUIPMENT

20 Pool Access - AstralPool Signature ladders

Code Standard Standard Standard

Code Code Steps A B

45782 45900 2 + 1 safety step 980 2430

Pool access - Ladders

Pool access - Ladders

Komfort 650 ladders

Komfort 1000 ladders for overflow pools

Komfort Split ladders

43270 650 1960 1210 492 750

42868 1000 1960 1210 842 750

Step in anti-slip plastic 500

Pool access - Ladders

Wall model ladders

2 350 620 250 710 180 500

Wall model ladder with Luxe model steps