Scribd
Upload
235 views2 pages

Fem Mid 1 Question Bank

This document appears to be a midterm exam for a 7th semester B.Tech course in Finite Element Method (FEM). It contains 7 questions testing students' understanding of fundamental FEM concepts like stress equilibrium, plane stress/strain conditions, displacement fields, stiffness matrices, interpolation functions, and treating boundary conditions. Students are asked to determine displacements, strains, stresses, and reactions for 1D and 2D structural problems modeled using basic frame and truss elements. The questions cover both the theoretical foundation and practical application of the FEM.

Uploaded by

allakagopichand
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
235 views2 pages

Fem Mid 1 Question Bank

This document appears to be a midterm exam for a 7th semester B.Tech course in Finite Element Method (FEM). It contains 7 questions testing students' understanding of fundamental FEM concepts like stress equilibrium, plane stress/strain conditions, displacement fields, stiffness matrices, interpolation functions, and treating boundary conditions. Students are asked to determine displacements, strains, stresses, and reactions for 1D and 2D structural problems modeled using basic frame and truss elements. The questions cover both the theoretical foundation and practical application of the FEM.

Uploaded by

allakagopichand
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SWARNANDHRA COLLEGE OF ENGINEERING & TECHNOLOGY

Seetharampuram, NARSAPUR-534 280


DEPARTMENT OF MECHANICAL ENGINEERING
MID EXAMINATION - I

Year/Sem: B.Tech VII Sem. (A&B) Max. Marks: 30


Subject: FEM Date:
Time: 9:30 to 11:30 AM
unit I

1a) Explain the applications of Finite Element method [05M]


b)Explain Stress and equilibrium for a 3D body [05M]
2a) what is meant by plane stress and plane strain conditions explain with examples. [05M]
b)In a plane strain problem we have x 20000 N / mm2 and

y 10000 N / mm2 E 30 X 106 N / mm2 and 0.3 Determine the value of stress z [05M]

u ( x 2 2 y 2 6 xy)104
3)If a displacement field is described by determine x , y and xy
v (3x 6 y y 2 )104
at x=1 and y=0
4)Determine the displacements of nodes of the spring system shown in figure.
Page no 20 fig 1.10
5a)Explain briefly about potential energy approach.
b)What are the merits and demerits of FEM

unit-2

1) Consider a bar as shown in figure. Youngs Modulus E = 2 x 105 N/mm2. A1 = 2cm2, A2 = 1cm2
and force of 100N. Determine the nodal displacement.

2)Derive strain displacement and stiffness matrix for 1-D bar element.
3)Consider the bar in below figure. Cross sectional area Ae = 1.2 in.2, and Yongs modulus E = 30 x
106 psi, if q1 = 0.02 in. and q2 = 0.025 in., determine the following
a. The displacement at point P,
b. The strain and stress
c. The element stiffness matrix, and
d. The strain energy in the element

d)the strain energy with in the elemnt.


4.Consider the bar shown in below figure. An axial load P = 200 x 103 N is applied as shown.
Using the penalty approach for handling boundary conditions, do the following
Determine the nodal displacements.
Determine the stress in each material.
Determine the reaction forces.

[10]

5.An axial load P = 400 x 103 N is applied at 200C to the rod as shown in below figure. The temperature is

then raised to 600C. Determine the elemental stresses

6a) What do you understand by interpolation function? Also write its mathematical
analysis.
b)What are the various methods to treat boundary conditions .Explain any one

7)In Fig a load P=60x105N ia applied as shown. Determine the displacement field, stress and support
reactions in the body take E=20X105N/mm2.

Page no 73 fig 3.5

You might also like