Scribd Logo
Upload

Welcome to Scribd!

  • 58 views

    L Imp Packaesbiax 01

    Uploaded by

    kztro066
    GASKET TECHNOLOGY

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    L Imp Packaesbiax 01

    Uploaded by

    kztro066
    58 views1 page
    GASKET TECHNOLOGY

    Original Title

    l Imp Packaesbiax 01

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    GASKET TECHNOLOGY

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    58 views1 page

    L Imp Packaesbiax 01

    Uploaded by

    kztro066
    GASKET TECHNOLOGY

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    AESBIAX

    Compression Proof and Form Stable e-PTFE Joint Sealant

    Main areas of application:


    Larger flanges and vessels Agitators
    Glaslined Flanges Heat exchangers

    Characteristics:
    Perfect adaption, ideal for sealing of uneven surfaces
    No change in width during compression, perfect for narrow or
    limited surface areas
    Selection criteria: Maximum uneveness of sealing surface should
    not be bigger than 1/3 of tape thickness.

    Material:
    100 % pure e-PTFE (in accordance with VDE-VDI 2480) in a biaxial
    expanded structure.

    AES/DOC/IN 5095 01/08


    Pressure [bar] 200 [psi] 2900

    Temp min. [C] -200 [F] -330 Form of


    Temp. max** [C] +280 [F] +555 Standard Packing Units: 10 Meter per roll,
    chem Resist.*** 0-14 Other length and dimensions on request
    Width in Thickness in mm [inch]
    ** After first heat cycle of more than120C retighten the bolts.

    Ref: L-IMP-PACKAESBIAX-01
    mm [inch] 2 3 4 5 6
    ***Except molten or dissolved alkaline metals, elementary or
    [0,08"] [1/8"] [0,16"] [3/16"] [1/4"]
    dissolved fluorine under high pressure, non ageing.
    10 [3/8"] x x
    Assembly instruction: 15 [9/16"] x x x
    Material ends have to be connected with an approx. 30 angle cut.
    20 [3/4"] x x x x x
    To seal the cut properly, we recommend to cut slightly longer and
    overlap the cutted ends to get 120% in material height at the cut. 25 [1"] x x x x x

    Copyright 2007 AESSEAL plc


    30 [1 3/16" x x x x

    35 [1 3/8"] x x x x

    40 [1 9/16"] x x x x

    45 [1 3/4"] x x x

    Approvals: 50 [2"] x x
    FDA: Sheet BG No. 21 from German Federal Health 55 [2 3/16"] x
    AESSEAL is a Registered Trademark of AESSEAL plc

    Ministry suitable up to 260C / 500F


    60 [2 3/8"] x
    TV Test - No. MP 4/0558: Kox KD = 26 xbD N/mm2 to 6 bar
    K1 = 2,4 xbD mm
    TA-Luft 1,7 x 10-7 mbar (l/ms)

    All technical information and advice is based on our experience and will be given most conscientiously but without any liability. Indication and figures need to be examined by the user.
    All sizes are subject to manufacturing tolerances. We reserve the right to modify specifications at any time.

    AESSEAL plc Telefon: +49 8104 6640-21 Distributed by:


    Packing Division Europe Telefax: +49 8104 6640-44
    Rudolf-Diesel-Ring 26a Email: [email protected]
    D-82054 Sauerlach Internet: http://www.aesseal.com
    Germany
    Our Purpose: To give our customers such exceptional service that they need never consider alternative sources of supply.

    www.aesseal.com

    You might also like