Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Inspection & Testing Requirements Scope:: Test and Inspection Per

    Uploaded by

    Abu Anas M.Salaheldin
    This document outlines inspection and testing requirements for carbon steel pipe with an outer diameter of 6 inches or more according to Saudi Aramco specifications. It lists specific tests and inspections that must be performed, including: 1) Visual inspection and checking certificates and records. 2) Tests of raw materials, chemical and mechanical properties, hydrostatic tests, ultrasonic testing, and radiographic testing. 3) Final inspections of dimensions, markings, coatings and handling. Certificates of compliance must meet API standards and random witnessing by inspectors is required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Inspection & Testing Requirements Scope:: Test and Inspection Per

    Uploaded by

    Abu Anas M.Salaheldin
    1K views2 pages
    This document outlines inspection and testing requirements for carbon steel pipe with an outer diameter of 6 inches or more according to Saudi Aramco specifications. It lists specific tests and inspections that must be performed, including: 1) Visual inspection and checking certificates and records. 2) Tests of raw materials, chemical and mechanical properties, hydrostatic tests, ultrasonic testing, and radiographic testing. 3) Final inspections of dimensions, markings, coatings and handling. Certificates of compliance must meet API standards and random witnessing by inspectors is required.

    Original Description:

    PIPE: Beveled End, Seamless or Submerged Arc Welded, Straight or Spiral Seam Carbon Steel Pipe

    Original Title

    SA 175-010700

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines inspection and testing requirements for carbon steel pipe with an outer diameter of 6 inches or more according to Saudi Aramco specifications. It lists specific tests and inspections that must be performed, including: 1) Visual inspection and checking certificates and records. 2) Tests of raw materials, chemical and mechanical properties, hydrostatic tests, ultrasonic testing, and radiographic testing. 3) Final inspections of dimensions, markings, coatings and handling. Certificates of compliance must meet API standards and random witnessing by inspectors is required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views2 pages

    Inspection & Testing Requirements Scope:: Test and Inspection Per

    Uploaded by

    Abu Anas M.Salaheldin
    This document outlines inspection and testing requirements for carbon steel pipe with an outer diameter of 6 inches or more according to Saudi Aramco specifications. It lists specific tests and inspections that must be performed, including: 1) Visual inspection and checking certificates and records. 2) Tests of raw materials, chemical and mechanical properties, hydrostatic tests, ultrasonic testing, and radiographic testing. 3) Final inspections of dimensions, markings, coatings and handling. Certificates of compliance must meet API standards and random witnessing by inspectors is required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    INSPECTION & TESTING REQUIREMENTS REVISION: 05/01/2000 CODE NUMBER: PAGE:

    SAUDI ARAMCO FORM-175 REPLACES: 12/01/1998 IR010700 1 of 2


    SCOPE: PIPE: Beveled End, Seamless or Submerged Arc Welded, Straight or Spiral Seam, Carbon Steel Pipe >= 6".

    TEST AND INSPECTION PER: 01-SAMSS-035 & API Spec. 5L, & Specifications As Noted Below.

    (1) VISUAL INSPECTION WITNESSING BY INSPECTOR


    (2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
    (3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
    0010
    0010
    *** X
    Pre-Fabrication/Production Requirements
    Cold Expansion
    Specification Details / Notes:
    If performed, shall not exceed 1.5% of the pipe circumference

    0020 X Raw Material Verification /

    0020
    0010
    *** X
    In process inspection & test requirement
    Material Test Reports
    Specification Details / Notes:
    /

    0020 X Chemical & Mechanical Requirements: a) Chemical Composition 01-SAMSS-035: See SAMSS for details. For thickness in
    excess of
    50.8 mm, the CE value shall be proposed by Vendor, approved

    0030 X Chemical & Mechanical Requirements: b) Product Analysis 01-SAMSS-035: Composition % maximums not to exceed
    those in SAMSS.
    Minimum elements to be reported per API-5L.

    0040 X X Chemical & Mechanical Requirements: c) Tensile Tests API-5L.

    0050 X X Chemical & Mechanical Requirements: d) Fracture Toughness 01-SAMSS-022: Only when required in PO.
    Tests

    0060 X X Chemical & Mechanical Requirements: e) Residual Stress Test For spiral welded pipes, after hydrotest.

    0070 X X Chemical & Mechanical Requirements: f) Hardness Tests /

    0080 X X Chemical & Mechanical Requirements: g) Control Tensile Tests API 5L: For pipe other than grade A25, one tensile test per
    heat shall
    be made as a control, and a record of such tests shall be

    0090 X X Chemical & Mechanical Requirements: h) Guided Bend Tests API 5L.

    0100 X X Hydrostatic Tests 01-SAMSS-035: Please note that test pressure is an exception
    to API 5L.

    0110 X X Ultrasonic Testing: (a) Ultrasonic examination (UT) of Weld; (b) 01-SAMSS-035: See SAMSS & API for details.
    Ultrasonic examination (UT) of Plate or Skelp

    0120 X X Radiographic Testing; (a) Fluoroscopic Operator Qualification; (b) Per 01-SAMSS-035 and API 5L.
    Frequency of calibration; (c) Procedure Elements

    IR010700 Continued...
    INSPECTION & TESTING REQUIREMENTS REVISION: 05/01/2000 CODE NUMBER: PAGE:
    SAUDI ARAMCO FORM-175 REPLACES: 12/01/1998 IR010700 2 of 2
    (1) VISUAL INSPECTION WITNESSING BY INSPECTOR
    (2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
    (3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
    0030
    0010
    ***
    X
    Final inspection & test requirements
    Workmanship
    Specification Details / Notes:
    Per 01-SAMSS-035 & API

    0020 X X Diameter, Wall Thickness, Weight, and Lengths Per 01-SAMSS-035 & API 5L. . Accuracy of measuring devices
    to be
    verified at every operating shift. All pipes shall be visually

    0030 X Straightness API 5L: random check. Deviation shall not exceed 0.2% of the
    length.

    0040 X Weld Inspection API 5L.

    0050 X Coatings Pipes shall be supplied w/o mill coating unless otherwise
    specified in
    P.O.

    0060 X Marking As specified in 01-SAMSS-035.

    0070 X Handling 01-SAMSS-024: For pipe 60mm OD and larger.

    0080 X API Certificate of Compliance API 5L.

    Notes:
    (1) May only be waived by the responsible Saudi Aramco, ASC, AOC
    Inspection Offices.
    (2) Random witnessing required only.
    (3) See form SA175 - 000003 for instructions on using this form.

    End of IR010700

    You might also like