Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    TUGAS 3 Penampang Share

    Uploaded by

    elmek jaya
    The document discusses using AutoCAD to: 1. Convert a 2D drawing into a 3D model by extruding faces and subtracting pieces. 2. Move and rotate the 3D objects. 3. Copy the 3D model objects to a 2D layout page for output.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    TUGAS 3 Penampang Share

    Uploaded by

    elmek jaya
    44 views6 pages
    The document discusses using AutoCAD to: 1. Convert a 2D drawing into a 3D model by extruding faces and subtracting pieces. 2. Move and rotate the 3D objects. 3. Copy the 3D model objects to a 2D layout page for output.

    Original Description:

    gamtek

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses using AutoCAD to: 1. Convert a 2D drawing into a 3D model by extruding faces and subtracting pieces. 2. Move and rotate the 3D objects. 3. Copy the 3D model objects to a 2D layout page for output.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    44 views6 pages

    TUGAS 3 Penampang Share

    Uploaded by

    elmek jaya
    The document discusses using AutoCAD to: 1. Convert a 2D drawing into a 3D model by extruding faces and subtracting pieces. 2. Move and rotate the 3D objects. 3. Copy the 3D model objects to a 2D layout page for output.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 6

    I.

    Tujuan

    1. Mahasiswa mampu menggambar dengan baik dan benar dengan perangkat Autocad

    2. Mahasiswa mampu memahami AutoCad 3D

    3. Mahasiswa mampu mengubah gambar 2D menjadi 3D

    II. Alat dan Bahan

    1. Alat :
    a. Komputer
    b. Aplikasi AutoCAD
    2. Bahan :
    a. Model gambar penampang 2D

    III. Langkah Kerja

    - Buka program AutoCAD 2012


    - Lakukan langkah-langkah sebagai berikut :
    Command: LIMITS
    Reset Model space limits:
    Specify lower left corner or [ON/OFF] <0.0000,0.0000>:
    Specify upper right corner <420.0000,297.0000>: 420,594
    Command: ZOOM
    Specify corner of window, enter a scale factor (nX or nXP), or
    [All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: All
    Command : VPORTS
    Standar viewports : Two Vertical
    Setup : 3D
    Select objects:
    Specify first point on axis or define axis by
    [Object/Last/View/Xaxis/Yaxis/Zaxis/2points]: x
    Specify a point on the X axis <0,0,0>:
    Too many objects selected for INTERSECT
    Specify rotation angle or [Reference]: 90
    2 constraint(s) removed
    Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
    Command: UNION
    Command: UNION
    Select objects: Specify opposite corner: 12 found
    Command: ROTATE3D
    Current positive angle: ANGDIR=counterclockwise ANGBASE=0
    Specify first point on axis or define axis by
    [Object/Last/View/Xaxis/Yaxis/Zaxis/2points]: z
    Specify a point on the Z axis <0,0,0>:
    Resuming ROTATE3D command.
    Specify a point on the Z axis <0,0,0>:
    Too many objects selected for INTERSECT
    Specify rotation angle or [Reference]: -45
    Command: MOVE 1 found
    Specify base point or [Displacement] <Displacement>:
    Specify second point or <use first point as displacement>:
    Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
    Command: _.erase 6 found
    1 constraint(s) removed
    Command: SUBTRACT Select solids, surfaces, and regions to subtract from ..
    Select objects: 1 found
    Select objects: Select solids, surfaces, and regions to subtract ..
    Select objects: 1 found
    Select objects: The selected surface was ignored. Surfaces cannot be subtracted from
    solids or
    regions.
    At least two solids, surfaces, or coplanar regions must be selected.
    Command: SUBTRACT Select solids, surfaces, and regions to subtract from ..
    Select objects: 1 found
    Select solids, surfaces, and regions to subtract ..
    Select objects: 1 found
    Select objects: The selected surface was ignored. Surfaces cannot be subtracted from
    solids or
    regions.
    At least two solids, surfaces, or coplanar regions must be selected.
    Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
    Layer = Yes
    Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
    <1>: 1 SUBTRACT
    Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
    Layer = Yes
    Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
    <1>: 1 INTELLIZOOM INTELLIZOOM INTELLIZOOM
    Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
    Layer = Yes
    Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
    <1>: 1 SUBTRACT
    Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
    Layer = Yes
    Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
    <1>: 1 ERASE
    Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
    Layer = Yes
    Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
    <1>: 1 MOVE
    Command: _.erase 1 found
    Command: _.erase 1 found
    Command: _.erase 1 found
    Command: _.erase 1 found
    Command: MOVE 1 found
    Specify base point or [Displacement] <Displacement>:
    Checking 561 intersections...
    Specify second point or <use first point as displacement>:
    Command: MOVE
    Select objects: 1 found
    Select objects: 1 found (1 duplicate), 1 total
    Select objects: Specify opposite corner: 0 found
    Select objects: 1 found (1 duplicate), 1 total
    Select objects: Specify opposite corner: 3 found (1 duplicate), 3 total
    Command: _.erase 1 found
    1 constraint(s) removed
    Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
    Command: MOVE
    Select objects: 1 found
    Specify base point or [Displacement] <Displacement>:
    Checking 903 intersections...
    Specify second point or <use first point as displacement>:
    Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
    Command: _.erase 1 found
    Command: SUBTRACT Select solids, surfaces, and regions to subtract from ..
    Select objects: 1 found
    Select objects:
    Select solids, surfaces, and regions to subtract ..
    Select objects: 1 found
    Select objects: 1 found (1 duplicate), 1 total
    Select objects:
    The selected surface was ignored. Surfaces cannot be subtracted from solids or
    regions.
    At least two solids, surfaces, or coplanar regions must be selected.
    Command:
    Command: '_.quickproperties
    Command:
    Command: '_.quickproperties
    Command:
    Command: '_.quickproperties
    Command: SUBTRACT Select solids, surfaces, and regions to subtract from ..
    Select objects: 1 found
    Select objects:
    Select solids, surfaces, and regions to subtract ..
    Select objects: 1 found
    Select objects: 1 found, 2 total
    Select objects:
    The selected surface was ignored. Surfaces cannot be subtracted from solids or
    regions.
    At least two solids, surfaces, or coplanar regions must be selected.
    Command: SUBTRACT Select solids, surfaces, and regions to subtract from ..
    Select objects: 1 found
    Select objects:
    Select solids, surfaces, and regions to subtract ..
    Select objects: 1 found
    Command: SU
    SUBTRACT Select solids, surfaces, and regions to subtract from ..
    Select objects: 1 found
    Select objects:
    Select solids, surfaces, and regions to subtract ..
    Select objects: 1 found
    Select objects:
    The selected surface was ignored. Surfaces cannot be subtracted from solids or
    regions.
    At least two solids, surfaces, or coplanar regions must be selected.
    Command: SU
    SUBTRACT Select solids, surfaces, and regions to subtract from ..
    Select objects: 1 found
    Select objects:
    Select solids, surfaces, and regions to subtract ..
    Select objects: 1 found
    Select objects: 1 found (1 duplicate), 1 total
    Select objects:
    No solids, surfaces, or regions selected.
    Automatic save to C:\Users\Mahasiswa\appdata\local\temp\PRAK 3D 3_2
    473_1_1_8943.sv$ ...
    Command: SUBTRACT Select solids, surfaces, and regions to subtract from ..
    Select objects: 1 found
    Select objects:
    Select solids, surfaces, and regions to subtract ..
    Select objects: 1 found
    Select objects:
    The selected surface was ignored. Surfaces cannot be subtracted from solids or
    regions.
    At least two solids, surfaces, or coplanar regions must be selected.
    Command:
    Command: '_3DFOrbit Press ESC or ENTER to exit, or right-click to display
    shortcut-menu
    Command: SUBTRACT Select solids, surfaces, and regions to subtract from ..
    Select objects: 1 found
    Select objects:
    Select solids, surfaces, and regions to subtract ..
    Select objects: 1 found
    Select objects:
    The selected surface was ignored. Surfaces cannot be subtracted from solids or
    regions.
    At least two solids, surfaces, or coplanar regions must be selected.

    Mengcopy objek 3D ke layar 2D


    Command: UCS
    Current ucs name: *WORLD*
    Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis]
    <World>: v
    - CTRL C kemudian pilih objek yang akan di copy.
    - Paste pada layar 2D yang telah di beri border dan keterangan.
    - Atur tampilan agar sesuai dengan ukuran kertas yang ada.

    You might also like