Scribd
Upload
380 views2 pages

HowTo Add NEXUS NX9K Switch

This document provides instructions for adding a Cisco Nexus NX9K switch virtual machine to an EVE topology in 3 steps: 1. Upload the NX9K qcow2 image file to the /opt/unetlab/addons/qemu directory on the EVE server and rename it. 2. Start the NX9K node, answer prompts to skip auto-provisioning, and set passwords. 3. Configure the boot image by identifying the proper image file in flash, entering configuration mode, and setting the boot command.

Uploaded by

Son Tran Hong Nam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
380 views2 pages

HowTo Add NEXUS NX9K Switch

This document provides instructions for adding a Cisco Nexus NX9K switch virtual machine to an EVE topology in 3 steps: 1. Upload the NX9K qcow2 image file to the /opt/unetlab/addons/qemu directory on the EVE server and rename it. 2. Start the NX9K node, answer prompts to skip auto-provisioning, and set passwords. 3. Configure the boot image by identifying the proper image file in flash, entering configuration mode, and setting the boot command.

Uploaded by

Son Tran Hong Nam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

HowTo add NEXUS NX9K switch

Versions this guide is based on:

EVE Image Name Downloaded Filename Version vCPUs vRAM

nxosv9k- nxosv- nxosv-


7.0.3.I5.2 final.7.0.3.I5.2.qcow2 final.7.0.3.I5.2 2 8192

Other versions should also be supported following bellow's procedure.

Steps below are based on nxosv-final.7.0.3.I5.2.qcow2 creation, for other image deployment, use proper
names respectively.

SSH to EVE and login as root, from cli and create temporary working directory on the EVE's root:

mkdir /opt/unetlab/addons/qemu/nxosv9k-7.0.3.I5.2/

Upload the downloaded nxosv-final.7.0.3.I5.2.qcow2 image to the EVE /opt/unetlab/addons/qemu/nxosv9k-


7.0.3.I5.2/ using for example FileZilla or WinSCP.

From cli go to created directory and rename image:

cd /opt/unetlab/addons/qemu/nxosv9k-7.0.3.I5.2/
mv nxosv-final.7.0.3.I5.2.qcow2 sataa.qcow2

Fix permissions:

/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

NX9K first boot setup steps:

1. Start node and on prompt answer:

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: yes
Do you want to enforce secure password standard (yes/no) no

Enter passwords for admin:


admin
admin
Would you like to enter the basic configuration dialog (yes/no): no

2. Login in your switch first time:

User Access Verification


login: admin
Password: admin

3. dir flash: To get proper image name to set boot nxos from it
switch# dir bootflash:
4096 Apr 18 00:53:27 2017 .rpmstore/
4096 Apr 18 00:53:47 2017 .swtam/
14160 Apr 18 00:58:45 2017 20170418_005603_poap_26331_init.log
757307904 Feb 16 17:17:14 2017 nxos.7.0.3.I5.2.bin
0 Apr 18 01:00:14 2017 platform-sdk.cmd
4096 Apr 18 00:55:47 2017 scripts/
4096 Apr 18 00:55:57 2017 virt_strg_pool_bf_vdc_1/
4096 Apr 18 00:54:00 2017 virtual-instance/
59 Apr 18 00:53:52 2017 virtual-instance.conf

4. Enter into global configuration mode:

switch# conf t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# boot nxos bootflash:nxos.7.0.3.I5.2.bin
end
copy run start

Now your NX9K after reboot or stop node will start normally. Steps 1-3 need to to do one time on every first
added NX9K node on the topology !

You might also like