Improvement in Food Resources - Part II (Animals) : Livestock

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 5

Chapter 15

Improvement in Food Resources - Part II (Animals)

Human being depend on animals for various needs and this includes food products like eggs, milk, meat and honey and other
products like clothes leather etc.

Earlier humans use to hunt wild animals for fulfilling their needs. But with the progress in civilisation, advancement of science
and invention in new technologies, humans are trying to develop ways by which they can increase the quality and quantity of
food production from animals.

The keeping and breeding of animals is called domestication. All domesticated and useful animals constitute
livestock.

Animal Husbandry
The scientific management of livestock which deals with the feeding, caring and breeding of domesticated animals is
called animal husbandry.
The farming of animals also needs planning to meet their basic requirement, to maintain health and control the diseases.
However, expanding population and scaling demands have resulted in the limitation in livestock breeding. Therefore there is a
need to improve these techniques which could which could ensure sustained supply of animals for the rising population without
affecting their existence.

Cattle farming
Cattle husbandry or cattle farming is carried out primarily for two reasons

milk production by milch animals and


for agricultural work, such as ploughing, tilling, irrigation etc, by draught animals.
However, they also domesticated for leather production and meat yield. Indian cattle mainly include cows (Bos
indicus) and buffaloes (Bos bubalis). Cows are adapted to drier regions of the country, while buffaloes are well
adapted to wet areas and river beds.
Milk is highly nutritious as it contains all major nutrients, i.e., carbohydrates, proteins, fats minerals and vitamins. Most of the
milk is obtained from cows and buffaloes. The total milk produced by buffaloes is much higher and rich in nutrients than that
produced by cows. Milk production, besides other factors, also depends upon the duration of lactation period, i.e., the period of
milk production after the birth of calf. Therefore, the milk production can be increased by increasing the lactation period.

Breeding in Cattle: There are many popular breeds of cows and buffaloes in our country.
They can be broadly divided into three categories:
Indigenous breeds (desi breeds- they are native to India) :
Eg. Red Sindhi and Sahiwal (show excellent resistance to
diseases)
Foreign or Exotic Breeds:
Eg. Jersey, Brown Swiss (Have a long lactation period)
Cross Breeds : The breeds chosen for cross breeding have a
set of favourable characters that may become a part of the
animal that is born as a result of cross breeding. Eg. Karan
fries.
Feeding management
The cattle require two kinds of food during breeding:-

Maintenance requirement: it contains all the nutrients for the maintenance of health of cattle. It enables the
animals to perform all the basic functions of life, provides strength and makes them resistance to diseases.
Milk producing requirement: it contains the specific nutrients required during lactation period. It thus
increases the duration of lactation period and increases the milk yield.

These food requirements are fulfilled with a specific diet containing the following components:-
Roughage: fibre rich food, such as hay, green fodder, silage and legumes, eg., cowpea, berseem, Lucerne.
Concentrates: nutrients rich food but low in fibres. It contains carbohydrates, vitamins and especially high
amount of proteins. Eg. Maize, oats, barley, jowar, gram and their byproducts such as wheat bran, rice bran,
gram husk, oil seed cakes, molasses.
Feed Additives: These are micro nutrients, hormones etc. that promote health and milk output of dairy
animals.
Disease Management:
A healthy animal has the following features:
Feeds regularly
Has a normal posture
Parasites of Cattle:
External parasites: live on skin and cause skin diseases
Internal Parasites: Eg. Worms and flukes. Worms effect stomach and intestine, while flukes infect and
damage the liver.
Infectious Diseases: they can spread to other animals on the farm and, can sometimes infect humans too. These
diseases can be bacterial (Anthrax, Tuberculosis) or viral (cow pox, foot and mouth disease)
For Prevention against viral and bacterial diseases, Vaccinations must be given to farm animals.

Poultry
Poultry (poult= chicken) is the breeding of fowls for egg production and meat which are supposed to be the best
sources of proteins and fats. Along with these birds, now-a-days, other birds such as ducks, geese, pigeons, turkeys
etc., are also reared for increased production of eggs and meat.
The birds reared for egg production are called eggers or layers while those for meat purpose are known as broilers.

Breeds of HEN
Indigenous breeds (desi breeds- they are native to India) :
Eg. Aseel, Bursa (show excellent resistance to diseases)
Foreign or Exotic Breeds: (lay more number of eggs than indigenous breeds and also give more meat)
Eg. White Leghorn, Rhode Island Red
Cross Breeds : The breeds chosen for cross breeding have a set of favourable characters that may become a part of
the animal that is born as a result of cross breeding. Eg. HH-260, B-77.
The desirable traits which can be achieved by cross breeding are as follows

Increased fertility and fecundity (egg laying capacity) of the fowl.


Increased meat yield.
Large sized eggs.
Low maintenance requirements.
Less diet requirements.
Rise in number and quality of chicks.
Increase in tolerance to high temperature or summer adaptation capacity.
Reduced size of layers with ability to utilise more fibrous and cheaper diets made by using agricultural
byproducts.
Production of eggs and broilers
The production of eggs and broilers requires special care for nutrition, shelter and disease control. The management
and care differs in different phases of their lives.
Layers: During growing period, they require sufficient space to avoid overcrowding enabling proper growth.
During egg laying period, they need enough space and light which increases the fertility.
Broilers: When the chickens are grown as broilers, their housing, nutritional and environmental needs
become different from that of the layers. At this time, they are provided with the conditions which are
favourable for their rapid growth and low mortality. The food provided to them should be protein rich with
adequate amount of fats and high amount of vitamin A and K.
Disease Management:
Poultry birds suffer from a number of viral, fungal and bacterial diseases. The birds may also be affected by
parasites and nutritional deficiencies.
The birds can be protected from various diseases by adopting the following measures:
Proper cleaning and sanitation of their living area,
Spraying of disinfectants at regular intervals,
For Prevention against viral and bacterial diseases, Vaccinations must be given to these birds.

Fish production
Fishes are cheap and excellent sources of animal protein. India with a long sea coastline has big wealth of fish fauna.
Types of fish:
True finned fish, eg. Catla, rohu etc.
Shell fish like prawns and molluscs

Over half of the population in the developing countries obtain at least 40% of its protein from fish.
Broadly speaking, Fish is obtained by two methods:
Capture Fishing obtaining fish from natural sources (natural water bodies such as oceans, large
lakes and rivers.)
Culture Fishery Production of fish using scientific methods or fishes obtained bby fish farming in
small water bodies.
Types of fisheries:
Fresh water fisheries (also called Inland Fisheries) - In rivers, fresh water lakes etc.
Marine fisheries: in seas, oceans.
Marine Fisheries:
India has an extensive coastline and an exclusive sea zone beyond it.
Popular marine fish: Pomphret, Mackerel, tuna, sardines and Bombay duck. These fish are captured from coastal
areas.
Marine fish are caught using fishing nets from boats and large trawlers. Yields are further increased by locating large
schools of fish using satellites and eco-sounders.
Mariculture: To fulfill the demands of growing population and to sustain the number of fish in marine waters,
mariculture is practiced.
Some marine fish of high economic value are also farmed in sea water. This includes mullets, bhetki, pearl spots,
prawns, mussels, oysters and even sea weed. Oysters not only provide food but pearls too.
Inland (Fresh Water) Fisheries:
India has a large number of Inland water resources, eg. Rivers, ponds and lakes. The mangrove wetlands, brackish
water areas in lagoons and estuaries also constitute large inland water reservoir. Capture fisheries are poor in inland
waters, therefore, major fish production from Inland water is carried out through culture called aquaculture.
Fish culture is sometimes carried out in paddy fields. These fish are grown in shallow waters of the paddy fields and
can tolerate high temperatures and turbidity. Some such fish are catla, rohu, murrels etc.

Composite fish culture


Composite fish culture is an extensive fish farming system, where fishes of different species differing in feeding habit
and habitats are stocked and cultured in the same pond. It is known as polyculture and mixed fish farming.
These cultures leads to the efficient utilization of food present in the pond and thus, increase the yield. Both local
and imported fishes are used in such cultures.
The advantage of composite fishes culture over single species culture are as follows:-
All available microhabitats (living areas) are fully utilized, as each species occupy different habitat.
The different species of fishes do not harm each other. Instead, they can have beneficial effects on
each other.
Different species have different food habits and thus, don not compete for food.
Composite culture yield variety of fishes and that to, more in number as compare to the single
species culture.
Let us understand this by an example:

Catla is a surface feeder and consumes zooplanktons.


Rohu is a column feeder in the middle zone and feeds on
algae and decaying plants.
Mrigal and common carps are bottom feeders feeding on
decaying plants.
Grass carps feeds on weeds and coarse vegetation at the
bottom of the sea.
When all the above species are stocked together in a pond, each on occupies its own niche(living area)
and feeds upon food different from each other. It increases the yield of all species of fishes.
One problem associated with such composite culture is that many of these fishes breed only during
monsoon season. Therefore, good quality seeds (Fish seed is fish eggs) of these fishes may not be
available or get mixed with that of other species, if collected from wild.
This problem can be solved by breeding of these fishes by hormonal stimulation. This technique supplies
pure and good quality fish seeds in desirable quantities for the culture.

Honey Bee culture


Honey is an economically important obtained from the honeybees. It is widely used hence, bee keeping is
practiced at a large scale. Bee keeping requires very low investments making it an additional income
generation activity. Further, this practice is a source of bees-wax which is used in different medicines and
cosmetics.
Bee keeping is one of the oldest agricultural pursuits of man. Honey is mentioned as a medicine in ancient
Indian literature. Now, honeybees have reached the highest degree of domestication. The modern scientific
methods for the production of honey and bees` wax is known as apiculture.
The honeybees used for apiculture are:-
Apis cerana indica (Indian bee)
Apis dorsata (grant bee or rock bee)
Apis florae (little bee)
Apis mellifera (European and Italian bee)
Apis adamsoni (African bee)
Out of these Apis mellifera and Apis cerana indica are the commonly domesticated species. A.mallifera is
more preferred bee as it produces 50 -200kg of honey per hive per year while A. cerana indica produces only 4.5 -
5.0kg of honey. They also breed very well, in the hive for a long duration and sting less.
Earlier, the honey was collected by killing the resting bees or making them leave the hive by using flames. The combs
were gathered, cut and squeezed to extract honey. However, this method is crude and does not produce pure honey.
This honey contains dirt, parts of bees body, waxy material, etc. therefore, it has been replaced by better scientific
methods.
Nowadays, honey bees are reared in artificial hives. This hive is made of wood and has large chambers. The
chambers are partitioned with wax sheets to attract bees. During extraction of honey, comb sheets are taken out and
kept in honey extractor. It throws out honey by centrifugal force without damaging the comb yielding large amount
of honey.
The quality and taste of honey depends upon the flower visited by them. This in turn depends on Pasturage.
Pasturage is the vegetation cover in a particular area. It determines the type and number of flowers available to the
bees for collection of nectar and pollen.

I would like to thank Rishabh (IX-A) for helping me while I was preparing
notes for this chapter.

You might also like