GD PZ-8 Manual
GD PZ-8 Manual
GD PZ-8 Manual
3rd Edition
April, 1998
8 STROKE
MODEL
PZH99D
PARTS LIST
MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH
GENUINE GARDNER DENVER
PARTS AND SUPPORT SERVICES
Gardner Denver and OPI genuine pump parts are parts by direct access to the Gardner Denver Machinery
manufactured to original tolerances and designed for op- Inc. Master Distribution Center (MDC) in Memphis, Ten-
timum dependability. Design and material innovations nessee.
are the result of years of experience with hundreds of dif- Your authorized distributor can support your Gardner
ferent pump applications. Reliability in materials and Denver and OPI pump needs with these services:
quality assurance are incorporated in our genuine re-
placement parts. 1. Trained parts specialists to assist you in selecting
the correct replacement parts.
Your authorized Gardner Denver and OPI distributor 2. Repair and maintenance kits designed with the
offers all the backup youll need. A worldwide network necessary parts to simplify servicing your pump.
of authorized distributors provides the finest product sup-
port in the pump industry. Authorized distributor service technicians are factory
trained and skilled in pump maintenance and repair. They
Your local authorized distributor maintains a large inven- are ready to respond and assist you by providing fast, ex-
tory of genuine parts and he is backed up for emergency pert maintenance and repair services.
For the location of your local authorized Gardner Denver and OPI distributor refer to the yellow pages of your
phone directory or contact:
When ordering parts, specify Pump MODEL and SERIAL per unit, quantity is indicated in parenthesis. SPECIFY
NUMBER (see nameplate on unit). The Serial Number EXACTLY THE NUMBER OF PARTS REQUIRED.
is also stamped on top of the cylinder end of the frame
DO NOT ORDER BY SETS OR GROUPS.
(cradle area).
To determine the Right Hand and Left Hand side of a
All orders for Parts should be placed with the nearest pump, stand at the power end and look toward the fluid
authorized distributor. end. Right Hand and Left Hand are indicated in parenthe-
sis following the part name, i.e. (RH) & (LH), when ap-
propriate.
Where NOT specified, quantity of parts required per
pump or unit is one (1); where more than one is required
15514 Page 1
TABLE OF CONTENTS
Page
Maintain Pump Reliability And Performance With Genuine Gardner Denverr Parts and Support Services . . . . . . . . . 1
Drive Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
15514 Page 2
FRAME & MISCELLANEOUS PARTS
207PZL797
(Ref. Drawing)
15514 Page 3
FRAME & MISCELLANEOUS PARTS
Ref.
No. Name of Part Qty. Part No.
15514 Page 4
DRIVE PARTS
15514
Page 5
DRIVE PARTS
Ref. Ref.
No. Name of Part Qty. Part No. No. Name of Part Qty. Part No.
17 PLATERETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2011701
18 GUIDEVALVE, Suction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2011700
19 BUSHING, Suction Valve Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2007674
20 LOCKWASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 95W2
21 SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 655EE06S
22 MANIFOLDSUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 200PZH069
23 GASKET, Suction Manifold to Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 25G41
24 SCREW, Suction Manifold to Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 655EG08N
25 GASKET, Suction Manifold Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 25C1154N
26 FLANGE, Suction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 64CU12
27 SCREW, Suction Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 75A150
28 NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 50B5
29 MANIFOLDDISCHARGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 200PZH071
30 GASKET, Discharge Manifold to Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 25AL35
31 STUD, Discharge Manifold Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 209PZL110
32 NUT, Discharge Manifold Flange Stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 50AW11
33 GASKETRING JOINT, Discharge Manifold Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 25V24
34 FLANGEDISCHARGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 64EB15
* FLANGEBLIND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 64EB240
Ref.
No. Name of Part Qty. Part No.
5 VALVEFLUID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 202PZL482
6 SEATVALVE * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 202PZL039
Page 9
Ref.
No. Name of Part Qty. Part No.
D74881
Ref.
No. Name of Part Qty. Part No.
15514 Page 11
Order by Part Number and Description. Reference Numbers are for your convenience only.
B73228
OIL PUMP
Ref.
No. Name of Part Qty. Part No.
Note: Part Numbers are listed for those parts provided for repair.
15514 Page 12
OIL PUMP & PIPING
15514
Page 13
Ref. Ref.
No. Name of Part Qty. Part No. No. Name of Part Qty. Part No.
9 VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 90A36
33 TEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 64P39
10 ADAPTORHOSE . . . . . . . . . . . . . . . . . . . 1 29Q9
34 NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 63N12X150
11 HYDRAULIC HOSE ASSEMBLY . . . . . . . 1 2009247
35 TEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 64P39
ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 64C6
36 PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 64A5
Page 16
B76839
OIL FILTER
Ref.
No. Name of Part Qty. Part No.
15514 Page 17
Order by Part Number and Description. Reference Numbers are for your convenience only.
Ref.
No. Name of Part Qty. Part No.
15514 Page 18
OPTIONAL EQUIPMENT
Ref.
No. Name of Part Qty. Part No.
15514 Page 19
GARDNER DENVER UNIT RECORD
The following unit identification plate is provided as a convenience to you, our valued Gardner
Denver customer. Please take the time to copy all the information from the actual nameplate of
your unit. The model number, date manufactured and serial number will be required when
contacting the company or your distributor for information or replacement parts.
200OPA496
(Ref. Drawing)
Specifications subject to change without notice.
Copyright 1998 Gardner Denver Machinery Inc.