Scribd
Upload
288 views5 pages

CL5000J Download Manual ENG

First, power off the scale and connect it to a computer via RS232C. Use the AVRfwupdate.exe program to select the correct communication port and new firmware file, then press download. The scale will reboot once download is complete. If power or connection is lost during download, restart the process from the beginning.

Uploaded by

Cesar Uribe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
288 views5 pages

CL5000J Download Manual ENG

First, power off the scale and connect it to a computer via RS232C. Use the AVRfwupdate.exe program to select the correct communication port and new firmware file, then press download. The scale will reboot once download is complete. If power or connection is lost during download, restart the process from the beginning.

Uploaded by

Cesar Uribe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

F/W update

Step1: First, Power off the scale and then,


Connect RS232C to computer

Pin-layout is following diagram


Scale(DB-9 Female) PC (DB-9 Male)
(2) -------------------------------- (3)
(3) -------------------------------- (2)
(5) -------------------------------- (5)

Step2: Execute AVRfwupdate.exe

Step3: Select RS232C communication port by pressing

Step4: Select new firmware ROM by check the checkBOX


Step5: Press , ready to F/W ROM download
* Software will not download if the firmware version is old or file desination is wrong
Window massage will show error massage
Step6: Turn on the scale. After few second download process will occure

When download finished, scale will reboot


NOTE: During this procedure power or communication connector is cut off
You must redo from step1
FONT LABEL Down Load.

1. Communication Settings

z RS232 SERIAL Communication Settings.

Must Save and Restart


2. FONT Download.

3. Label Download

You might also like