P2413

P2413
Submitter Email: [email protected]

Type of Project: Modify Existing Approved PAR
PAR Request Date: 24-Jul-2015
PAR Approval Date: 03-Sep-2015
PAR Expiration Date: 31-Dec-2018
Status: Modification to a Previously Approved PAR
Root PAR: P2413 Approved on: 27-Mar-2014
1.1 Project Number: P2413

1.2 Type of Document: Standard
1.3 Life Cycle: Full Use
2.1 Title: Standard for an Architectural Framework for the Internet of Things (IoT)
3.1 Working Group: Internet of Things (IoT) Architecture (BOG/CAG/IoT Architecture)

Contact Information for Working Group Chair
Name: Oleg Logvinov
Email Address: [email protected]
Phone: 7323220155
Contact Information for Working Group Vice-Chair
None
3.2 Sponsoring Society and Committee: IEEE-SA Board of Governors/Corporate Advisory Group (BOG/CAG)
Contact Information for Sponsor Chair
Name: Philip Wennblom
Phone: 408-765-4437
Contact Information for Standards Representative
None
3.3 Joint Sponsor: IEEE Computer Society/Cloud Computing Standards Committee (C/CCSC)
Name: Stephen L. Diamond
Phone: +1 408-326-4710
None
3.4 Joint Sponsor: IEEE Consumer Electronics Society/Standards Committee (CES/SC)

Name: Yu Yuan
Phone: 8613683532808
Name: Yu Yuan
Phone: 8613683532808
3.5 Joint Sponsor: IEEE Communications Society/Power Line Communications (COM/PLC)

Name: Jean Philippe Faure
Phone: +33 (0)4 76 28 28 59
None
1
3.6 Joint Sponsor: IEEE Communications Society/Standards Development Board (COM/SDB)
Name: Mehmet Ulema
Phone: +1 732 957-0924
Name: Mehmet Ulema
Phone: +1 732 957-0924
4.1 Type of Ballot: Entity

4.2 Expected Date of submission of draft to the IEEE-SA for Initial Sponsor Ballot: 04/2016
4.3 Projected Completion Date for Submittal to RevCom: 05/2017
5.1 Approximate number of entities expected to be actively involved in the development of this project: 15
5.2 Scope: This standard defines an architectural framework for the Internet of Things (IoT), including descriptions of various IoT domains,
definitions of IoT domain abstractions, and identification of commonalities between different IoT domains.
The architectural framework for IoT provides a reference model that defines relationships among various IoT verticals (e.g., transportation,
healthcare, etc.) and common architecture elements. It also provides a blueprint for data abstraction and the quality "quadruple" trust that
includes protection, security, privacy, and safety." Furthermore, this standard provides a reference architecture that builds upon the reference
model. The reference architecture covers the definition of basic architectural building blocks and their ability to be integrated into multi-tiered
systems. The reference architecture also addresses how to document and, if strived for, mitigate architecture divergence. This standard
leverages existing applicable standards and identifies planned or ongoing projects with a similar or overlapping scope.
5.3 Is the completion of this standard dependent upon the completion of another standard: No
5.4 Purpose: The Internet of Things (IoT) is predicted to become one of the most significant drivers of growth in various technology markets.
Most current standardization activities are confined to very specific verticals and represent islands of disjointed and often redundant
development. The architectural framework defined in this standard will promote cross-domain interaction, aid system interoperability and
functional compatibility, and further fuel the growth of the IoT market. The adoption of a unified approach to the development of IoT systems
will reduce industry fragmentation and create a critical mass of multi-stakeholder activities around the world.
5.5 Need for the Project: This standard will help to reduce current fragmentation in the various IoT verticals. By addressing the need for an
IoT architectural framework, IEEE will fulfill its mission to benefit humanity by increasing the interoperability and portability of IoT solutions
to both the industry and the end consumer.
5.6 Stakeholders for the Standard: Consumers, service providers, utilities, equipment manufacturers, automotive manufacturers,
transportation providers, and ICT infrastructure providers
Intellectual Property
6.1.a. Is the Sponsor aware of any copyright permissions needed for this project?: No
6.1.b. Is the Sponsor aware of possible registration activity related to this project?: No
7.1 Are there other standards or projects with a similar scope?: Yes
If Yes please explain: There are projects related to IoT reference architectures being developed in other organizations, such as ISO/IEC JTC 1
Special Working Group 5 (Internet of Things) and Working Group 7 (Sensor Networks), oneM2M (http://www.onem2m.org/) , ITU-T, IETF,
and W3C.
and answer the following

Sponsor Organization: ISO/IEC
Project/Standard Number: JTC1
Project/Standard Date: 01-Jan-2013
Project/Standard Title: JTC1
7.2 Joint Development
Is it the intent to develop this document jointly with another organization?: No
8.1 Additional Explanatory Notes (Item Number and Explanation): With this modified PAR, two joint sponsors are being added.

P2413

Uploaded by

Copyright:

Available Formats

P2413

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

P2413

Uploaded by

Copyright:

Available Formats

P2413

Submitter Email: [email protected]

1.1 Project Number: P2413

3.1 Working Group: Internet of Things (IoT) Architecture (BOG/CAG/IoT Architecture)

3.4 Joint Sponsor: IEEE Consumer Electronics Society/Standards Committee (CES/SC)

3.5 Joint Sponsor: IEEE Communications Society/Power Line Communications (COM/PLC)

4.1 Type of Ballot: Entity

and answer the following

You might also like