Scribd Logo
Upload

Welcome to Scribd!

  • 91 views

    Steel Wise

    Uploaded by

    nvnagaraju
    Table 1 and Table 2 summarize ASTM specifications for carbon and alloy structural steels. [1] Table 1 lists applicable shape series and steel types. [2] Table 2 provides yield stress, tensile stress ranges for various steel grades. [3] Footnotes provide additional information on material properties and applicability based on shape thickness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Steel Wise

    Uploaded by

    nvnagaraju
    91 views1 page
    Table 1 and Table 2 summarize ASTM specifications for carbon and alloy structural steels. [1] Table 1 lists applicable shape series and steel types. [2] Table 2 provides yield stress, tensile stress ranges for various steel grades. [3] Footnotes provide additional information on material properties and applicability based on shape thickness.

    Original Description:

    Steel deatiling and secitons

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Table 1 and Table 2 summarize ASTM specifications for carbon and alloy structural steels. [1] Table 1 lists applicable shape series and steel types. [2] Table 2 provides yield stress, tensile stress ranges for various steel grades. [3] Footnotes provide additional information on material properties and applicability based on shape thickness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    91 views1 page

    Steel Wise

    Uploaded by

    nvnagaraju
    Table 1 and Table 2 summarize ASTM specifications for carbon and alloy structural steels. [1] Table 1 lists applicable shape series and steel types. [2] Table 2 provides yield stress, tensile stress ranges for various steel grades. [3] Footnotes provide additional information on material properties and applicability based on shape thickness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    steelwise

    Table 1
    Table 2-4
    Applicable ASTM Specifications for Various Structural Shapes
    Applicable Shape Series
    ASTM Fy Yield Fu Tensile
    Steel Type HSS
    Designation Stressa (ksi) Stressa (ksi) W M S HP C MC L Pipe
    Rect. Round
    b
    A36 36 58-80
    A53 Gr B 35 60
    42 58
    Gr. B
    46 58
    A500
    46 62
    Gr. C
    50 62
    Carbon Gr. A 36 58
    A501
    Gr. B 50 70
    Gr. 50 50 65-100
    A529c
    Gr. 55 55 70-100
    A709 36 36 58-80b
    36 36-52 58
    A1043d
    50 50-65 65
    Gr. 42 42 60
    Gr. 50 50 65
    A572 Gr. 55 55 70
    Gr. 60e 60 75
    Gr. 65e 65 80
    Gr. Ia, Ib & II 50g 70g
    A618f
    Gr. III 50 65
    High-Strength
    50 50 65
    Low-Alloy
    A709 50S 50-65 65
    50W 50 70
    50 50h 65h
    60 60 75
    A913
    65 65 80
    70 70 90
    A992 50i 65i
    Corrosion A588 50 70
    Resistant
    High-Strength A847 50 70
    Low-Alloy

    = Preferred material specification.


    = Other applicable material specification, the availability of which should be confirmed prior to specification.
    = Material specification does not apply.

    a Minimum unless a range is shown.


    b For wide-flange shapes with flange thickness over 3 in., only the minimum of 58 ksi applies.
    c For shapes with a flange or leg thickness less than or equal to 1 in. only. To improve weldability, a maximum carbon equivalent can be specified
    (per ASTM Supplementary Requirement S78). If desired, maximum tensile stress of 90 ksi can be specified (per ASTM Supplementary Requirement S79).
    d For shape profiles with a flange width of 6 in. or greater.
    e For shapes with a flange thickness less than or equal to 2 in. only.
    f ASTM A618 can also be specified as corrosion-resistant; see ASTM A618.
    g Minimum applies for walls nominally -in. thick and under. For wall thickness over -in., Fy = 46 ksi and Fu = 67 ksi.
    h If desired, maximum yield stress of 65 ksi and maximum yield-to-tensile strength ratio of 0.85 can be specified
    (per ASTM Supplementary Requirement S75).
    i A maximum yield-to-tensile ratio of 0.85 and carbon equivalent formula are included as mandatory, and some variation is allowed including for
    shapes tested with coupons cut from the web; see ASTM A992.

    FEBRUARY 2015

    You might also like