70-410 R2 LM Worksheet Lab 05
70-410 R2 LM Worksheet Lab 05
70-410 R2 LM Worksheet Lab 05
LAB 5
CONFIGURING PRINT
AND DOCUMENT
SERVICES
23. Press Alt+Prt Scr to take a screen shot of the Print Management console showing
the contents of the Printers node. Press Ctrl+V to paste the image on the page
provided in the Lab 5 worksheet file.
10. Press Alt+Prt Scr to take a screen shot of the Devices and Printers window. Press
Ctrl+V to paste the image on the page provided in the Lab 5 worksheet file.
17. Press Alt+Prt Scr to take a screen shot of the Devices and Printers window,
showing the latest change. Press Ctrl+V to paste the image on the page provided
in the Lab 5 worksheet file.
Mindset Consumables for the color printer you installed in Exercise 5.1 are
expensive, so you want to prevent users from running personal jobs or
printing after hours. However, you want selected users to be able to
access the printer at all times. You also want to prioritize those users
print jobs, printing them before other users jobs.
MOAC 70-410 - Installing and Configuring Windows Server 2012 R2 LM Worksheet
When users send print jobs requiring a paper size that is not
available, the entire print queue halts until someone inserts
the correct paper for that job. Which of the parameters on the
Advanced page of a printers Properties sheet can prevent
Question
the queue from being halted?
8
Hold mismatched documents
15. Press Alt+Prt Scr to take a screen shot of the Security tab in the MSColor-PM
Properties sheet. Press Ctrl+V to paste the image on the page provided in the Lab
5 worksheet file.
Lab
Challenge Creating a Printer Pool
Overview To process a large quantity of print jobs with a single printer, you
can create a printer pool, which distributes the print jobs among
multiple print devices.
Completion time 20 minutes
MOAC 70-410 - Installing and Configuring Windows Server 2012 R2 LM Worksheet
To support the Legal department at Contoso, Ltd., your supervisor purchased five
identical HP LaserJet 4250 printers to be used as a printer pool. Unlike the printers
you installed previously in this lab, which connected to the server using LPT ports,
these five printers have Hewlett Packard JetDirect network interface adapters that
have already been assigned the following IP addresses:
10.0.0.220
10.0.0.221
10.0.0.222
10.0.0.223
10.0.0.224
To complete this challenge, add a printer on your server, and share it using the name
HPLJ4250 Pool. Then, configure the printer to function as a printer pool using the IP
addresses cited previously. Write the procedure you use to create and configure the
printer pool, and then take a screen shot of the Ports tab in the HPLJ4250 Pool
Properties sheet. Paste the image in the Lab 5 worksheet file.