This document provides safety information for a hard surface antimicrobial product. Key points include:
- Wear protective gloves and clothing to avoid skin contact. Use in a well-ventilated area.
- The product is a clear light yellow liquid with a characteristic odor. It is completely soluble in water and has a specific gravity of approximately 1.02.
- The product is stable but can produce toxic fumes if heated strongly. Avoid incompatible materials and excessive heat.
- It is corrosive and harmful if swallowed, inhaled, or absorbed through the skin. Prolonged exposure may cause irritation.
This document provides safety information for a hard surface antimicrobial product. Key points include:
- Wear protective gloves and clothing to avoid skin contact. Use in a well-ventilated area.
- The product is a clear light yellow liquid with a characteristic odor. It is completely soluble in water and has a specific gravity of approximately 1.02.
- The product is stable but can produce toxic fumes if heated strongly. Avoid incompatible materials and excessive heat.
- It is corrosive and harmful if swallowed, inhaled, or absorbed through the skin. Prolonged exposure may cause irritation.
This document provides safety information for a hard surface antimicrobial product. Key points include:
- Wear protective gloves and clothing to avoid skin contact. Use in a well-ventilated area.
- The product is a clear light yellow liquid with a characteristic odor. It is completely soluble in water and has a specific gravity of approximately 1.02.
- The product is stable but can produce toxic fumes if heated strongly. Avoid incompatible materials and excessive heat.
- It is corrosive and harmful if swallowed, inhaled, or absorbed through the skin. Prolonged exposure may cause irritation.
This document provides safety information for a hard surface antimicrobial product. Key points include:
- Wear protective gloves and clothing to avoid skin contact. Use in a well-ventilated area.
- The product is a clear light yellow liquid with a characteristic odor. It is completely soluble in water and has a specific gravity of approximately 1.02.
- The product is stable but can produce toxic fumes if heated strongly. Avoid incompatible materials and excessive heat.
- It is corrosive and harmful if swallowed, inhaled, or absorbed through the skin. Prolonged exposure may cause irritation.
Other Protective Clothing and Equipment: Clothes sufficient to avoid contact.
Ventilation: Adequate ventilation to maintain air concentrations below established limits.
9. Physical and Chemical Properties
SAFETY DATA SHEET Solubility in Water: Complete Specific Gravity: ~ 1.02 Appearance/Odor: Clear light yellow liquid/Characteristic 1. Identification of the Substance and Company Process NPD 10. Stability and Reactivity Stability: Stable Hazardous Polymerization: Will not occur. Hard Surface Antimicrobial NFPA 704 HAZARD RATING: Incompatible Materials: None known. Product No. 6390 HEALTH: 3 Conditions to Avoid: None known. MSDS No. 6390 FIRE: 1 Hazardous Decomposition or Byproducts: Forced ignition of dried residues may produce CO, CO2, nitrogen Prepared by: M. Ebers REACTIVITY: 0 oxides. [email protected] Date Created: December 1, 2001 Date Revised: 15 July 2010 Date Reviewed: NA 11. Toxicological Information 11.1 Acute (Primary Routes of Exposure) STERIS Corporation, P. O. Box 147, St. Louis, MO 63166, US Eyes: Concentrate is corrosive to tissues. Use dilution may cause significant irritation Emergency Telephone No.1-314-535-1395 (STERIS); 1-800-424-9300 (CHEMTREC) Skin: Concentrate is corrosive to tissues. Use dilution may cause slight irritation. Dermal LD50 (rabbits) is Telephone Number for Information: 1-800-444-9009 (Customer Service-Scientific Products) 830mg/kg. Inhalation: Rats exposed to 63.7mg/liter of a 1:256 dilution for six hours showed no toxic effects. Finely divided 2. Hazards Identification: Corrosive to eyes and skin. Harmful in contact with skin or if swallowed. spray mists of use-dilution irritating to mucous membranes. Ingestion: Oral LD 50 (rats) 1420mg/kg. Concentrate corrosive to mouth and throat. 3. Composition/Information on Ingredients 11.2 Long Term Exposure: None known. Hazardous Component(s) % By Wt. CAS No. EU No. Symbol R Phrases Carcinogenicity: IARC, NTP and OSHA do not list this product or its ingredients as carcinogens. N,N-Dialkyl (C8-10) 9.20 68424-95-3 270-335-1 NA NA N,Ndimethylammonium chloride 12. Ecological Information: None known. (See label for specific breakdown) 13. Disposal Considerations Alkyl (50% C14, 40% C12, 10% C16) 6.14 68424-85-1 270-325-2 NA NA Product may be flushed to a sanitary sewer with copious amounts of water, if in accordance with state, local and dimethyl benzyl ammonium chloride federal regulations. For additional guidance, contact the State Water Board or the Regional Office of the EPA. Monoethanolamine 6.00 141-43-5 205-483-3 NA NA Ethanol <3 64-17-5 200-578-6 NA NA 14. Transport Information Ground: Disinfectant, Liquid, Corrosive N.O.S. (Quaternary Ammonium Compounds) 8, UN1903, PG III Road/Rail: ADR/RID Class: UN1903, Disinfectant, Liquid, Corrosive N.O.S. (Quaternary Ammonium 4. First Aid Measures Compounds), 8, PGIII Eye Contact: Flush eyes immediately with water for at least 15 minutes. Get medical attention. Sea: IMDG Class: Disinfectant, Liquid, Corrosive N.O.S. (Quaternary Ammonium Compounds), 8, Corrosive, Skin Contact: Flush skin immediately with plenty of water for at least 15 minutes. Get medical attention. UN 1903, PG III Inhalation: Remove patient to fresh air. If not breathing, give artificial respiration. Get medical attention. Air: ICAO/IATA Class: Disinfectant, Liquid, Corrosive N.O.S. (Quaternary Ammonium Compounds), 8, Ingestion: Do not induce vomiting. Get medical attention. Do not give anything by mouth to an unconscious Corrosive, UN 1903, PG III person. If conscious, drink large quantity of milk or water. 15. Regulatory Information 5. Fire-Fighting Measures USA State Regulations: May contain trace levels of acetaldehyde, n-nitrosodimethylamine, propylene oxide, Flash Point: None to boiling. Special Hazards: None known. benzene, benzyl chloride, ethylene oxide. Extinguishing Media: Suitable for surrounding fire - water, foam, dry chemical, CO2. EPA Registration number: 1043-90 Special Fire Fighting Procedures: None known. 16. Other Information: The information on this sheet is not a specification and does not guarantee specific 6. Accidental Release Measures: Spills may be picked up with a mop and followed by a water rinse. Small spills properties. The information is intended to provide general knowledge as to health and safety based upon our may be flushed to a sanitary sewer with copious amounts of water. knowledge of the handling, storage and use of the product. It is not applicable to unusual or non-standard uses of the product or where instruction or recommendations are not followed. 7. Handling and Storage 7.1 Handling: This product will withstand an occasional accidental freezing without loss in normal performance NA - Not Applicable ND - No Data characteristics. It must be thoroughly thawed and agitated (roll drum) before being used. ND - No hay datos 7.2 Storage: Store closed container in a cool area away from heat and flame.
8. Exposure Control/Personal Protection
8.1 Occupational Exposure Limits Monoethanolamine: ACGIH TLV and OSHA PEL= 3ppm; MAK = 5 mg/m3 Ethanol: ACGIH TLV and OSHA PEL= 1000ppm; UK HSE EH40 LTEL = 1000ppm (TWA) 8.2 Personal Protection Respirator Protection: Not normally required. Required if established exposure limits (See Sec. 8.1) are exceeded. Eye Protection: Safety glasses or goggles.