Behringer BCF2000 Controller Template

Using a hardware controller with Stylus RMX gives you maximum control
over your groove production. You can edit, re-mix, and manipulate RMX
grooves instantly in real time. Its powerful, fun, and musically rewarding!

There are two main steps to perform in order to get started; loading the
MIDI sysex data for the BCF2000, and selecting the template in Stylus RMX.

The BCF2000 features a great collection of faders, push-style encoders and

switches. The template takes full advantage of those features every single
control is used.
STEP 1 SET UP THE BCF2000

Make sure you have installed the hardware and software for the BCF2000
according to Behringers documentation.

MIDI system exclusive preset data must be sent to the BCF2000. You can
use any sys-ex utility that supports .syx files.

For Mac OSX, we suggest SysEx Librarian, a freeware tool available at:

http://www.snoize.com/SysExLibrarian/

For PC, we recommend MIDI-OX, which is available at:

http://www.midiox.com/moxdown.htm

TRANSFERRING SYSEX TO THE BCF2000

IMPORTANT - This procedure places preset data into BCF2000

temporary memory. After you have transferred the sysex file, you
will need to STORE it to the desired preset location.

1. Open the RMX_BCF2000.syx file in the Sysex tool you have chosen.

The file is located in the Behringer BCF-2000 support directory within

the MIDI Learn directory.

/SAGE/Stylus RMX/Patches/MIDI Learn/Behringer BCF-2000/RMX_BCF2000.syx

2. Initiate a sysex transfer to the BCF2000. You will see the display on
the BCF2000 flashing. Once the transfer is complete, the flashing will
stop.

3. The preset data is now in the temporary memory buffer of the

BCF2000. To save it permanently, be sure to press the STORE button
on the BCF2000, select the destination preset location for storage, and
then press STORE again.
STEP 2 SET UP STYLUS RMX

Make sure you have Stylus RMX version 1.5 or above installed.

SELECT THE CONTROLLER TEMPLATE IN RMX

From the Stylus RMX Utility menu (the button denoted with a Floppy icon),
select MIDI Learn / Load Template.

Select the template Behringer BCF-2000.ctl_rmx

You are ready to control Stylus RMX from the BCF2000.

USING RMX AND THE BCF2000

The Behringer BCF-2000.ctl_rmx template works with the preset you

stored in the BCF2000.

Be sure that your host application is sending MIDI to RMX; then load grooves
into all 8 parts.

The table at the end of this document shows how the BCF2000 hardware
controls are mapped to Stylus RMX. Have fun exploring the amazing features
of Stylus RMX from your hardware controller!
CREATE AND SHARE YOUR OWN TEMPLATES

The template we have provided is only the beginning of what you can do with
your hardware controller and Stylus RMX. Weve provided a blank table for
you to document your own Controller Template creations. You will find it in
the User Template Tools folder, which is located inside the MIDI Learn
directory on your hard drive.

/SAGE/Stylus RMX/Patches/MIDI Learn/User Template Tools/)

We encourage you to create your own templates, and then share them at the
Yahoo Spectrasonics User Group:

http://launch.groups.yahoo.com/group/spectrasonics/

Enjoy using Stylus RMX with your BCF2000.

Best regards,

The Spectrasonics Team

BCF2000 Multi Part Controller Template Page 1

HARDWARE CONTROLLER:
BEHRINGER BCF2000
HARDWARE DATA FILE: HARDWARE PRESET:
RMX_BCF2000.syx Selected by User
STYLUS RMX TEMPLATE FILE:

Behringer BCF-2000.ctl_rmx
Parameters listed below are mapped to RMX parts 1-8, unless otherwise noted.*
Sysex loads into BCF2000 RAM. Be sure to STORE preset after transfer.
TEMPLATE OVERVIEW:
Faders 1-8 -> Mixer Level Part 1-8
Upper Buttons 33-40 -> Solos
Lower Buttons 41-48 -> Mutes
Group 1 Push Encoders 1-8 -> Mixer Pan Part 1-8
Group 1 Push Encoder Buttons 1-8 -> Pan Reset
Group 2 Push Encoders 9-16 -> Master Filter Tone
Group 2 Push Encoder Buttons 9-16 -> Master Filter Tone Reset
Group 3 Push Encoders 17-24 -> Pitch
Group 3 Push Encoder Buttons 17-24 -> Pitch Reset
Group 4 Push Encoders 25-32 -> Chaos Pattern Amount
Group 4 Push Encoder Buttons 25-32 -> Chaos On/Off (momentary)
Buttons 49 -> Half Speed (single part)*
Buttons 50 -> Double Speed (single part)*
Button 51 -> All Play
Button 52 -> Global Reverse (momentary)
Foot Switch -> CC# 119
Foot Controller -> Master Volume

Control CC# Channel Description

Fader 1 11 OMNI Mixer: Level Part 1
Fader 2 12 OMNI Mixer: Level Part 2
Fader 3 13 OMNI Mixer: Level Part 3
Fader 4 14 OMNI Mixer: Level Part 4
Fader 5 15 OMNI Mixer: Level Part 5
Fader 6 16 OMNI Mixer: Level Part 6
Fader 7 17 OMNI Mixer: Level Part 7
Fader 8 18 OMNI Mixer: Level Part 8

- continues -
BCF2000 Multi Part Controller Template Page 2

Control CC# Channel Description

PUSH ENCODER Group 1
E1 19 OMNI Mixer: Pan Part 1
b1 19 OMNI RESET Pan Part 1
E2 20 OMNI Mixer: Pan Part 2
b2 20 OMNI RESET Pan Part 2
E3 21 OMNI Mixer: Pan Part 3
b3 21 OMNI RESET Pan Part 3
E4 22 OMNI Mixer: Pan Part 4
b4 22 OMNI RESET Pan Part 4
E5 23 OMNI Mixer: Pan Part 5
b5 23 OMNI RESET Pan Part 5
E6 24 OMNI Mixer: Pan Part 6
b6 24 OMNI RESET Pan Part 6
E7 25 OMNI Mixer: Pan Part 7
b7 25 OMNI RESET Pan Part 7
E8 26 OMNI Mixer: Pan Part 8
b8 26 OMNI RESET Pan Part 8
PUSH ENCODER Group 2
E9 74 OMNI Edit: Master Filter Tone Part 1
b9 74 OMNI RESET Master Filter Tone Part 1
E10 75 OMNI Edit: Master Filter Tone Part 2
b10 75 OMNI RESET Master Filter Tone Part 2
E11 76 OMNI Edit: Master Filter Tone Part 3
b11 76 OMNI RESET Master Filter Tone Part 3
E12 77 OMNI Edit: Master Filter Tone Part 4
b12 77 OMNI RESET Master Filter Tone Part 4
E13 78 OMNI Edit: Master Filter Tone Part 5
b13 78 OMNI RESET Master Filter Tone Part 5
E14 79 OMNI Edit: Master Filter Tone Part 6
b14 79 OMNI RESET Master Filter Tone Part 6
E15 80 OMNI Edit: Master Filter Tone Part 7
b15 80 OMNI RESET Master Filter Tone Part 7
E16 81 OMNI Edit: Master Filter Tone Part 8
b16 81 OMNI RESET Master Filter Tone Part 8

- continues -
BCF2000 Multi Part Controller Template Page 3

Control CC# Channel Description

PUSH ENCODER Group 3
E17 66 OMNI Edit: Pitch Part 1
b17 66 OMNI RESET Pitch Part 1
E18 67 OMNI Edit: Pitch Part 2
b18 67 OMNI RESET Pitch Part 2
E19 68 OMNI Edit: Pitch Part 3
b19 68 OMNI RESET Pitch Part 3
E20 69 OMNI Edit: Pitch Part 4
b20 69 OMNI RESET Pitch Part 4
E21 70 OMNI Edit: Pitch Part 5
b21 70 OMNI RESET Pitch Part 5
E22 71 OMNI Edit: Pitch Part 6
b22 71 OMNI RESET Pitch Part 6
E23 72 OMNI Edit: Pitch Part 7
b23 72 OMNI RESET Pitch Part 7
E24 73 OMNI Edit: Pitch Part 8
b24 73 OMNI RESET Pitch Part 8
PUSH ENCODER Group 4
E25 90 OMNI Chaos: Pattern Amount Part 1
b25 106 OMNI Chaos: On/Off Part 1
E26 91 OMNI Chaos: Pattern Amount Part 2
b26 107 OMNI Chaos: On/Off Part 2
E27 92 OMNI Chaos: Pattern Amount Part 3
b27 108 OMNI Chaos: On/Off Part 3
E28 93 OMNI Chaos: Pattern Amount Part 4
b28 109 OMNI Chaos: On/Off Part 4
E29 94 OMNI Chaos: Pattern Amount Part 5
b29 110 OMNI Chaos: On/Off Part 5
E30 95 OMNI Chaos: Pattern Amount Part 6
b30 111 OMNI Chaos: On/Off Part 6
E31 96 OMNI Chaos: Pattern Amount Part 7
b31 112 OMNI Chaos: On/Off Part 7
E32 97 OMNI Chaos: Pattern Amount Part 8
b32 113 OMNI Chaos: On/Off Part 8

- continues -
BCF2000 Multi Part Controller Template Page 4

Control CC# Channel Description

Button 33 35 OMNI Mixer: Part 1 Solo
Button 34 36 OMNI Mixer: Part 2 Solo
Button 35 37 OMNI Mixer: Part 3 Solo
Button 36 38 OMNI Mixer: Part 4 Solo
Button 37 39 OMNI Mixer: Part 5 Solo
Button 38 40 OMNI Mixer: Part 6 Solo
Button 39 41 OMNI Mixer: Part 7 Solo
Button 40 42 OMNI Mixer: Part 8 Solo
Button 41 27 OMNI Mixer: Part 1 Mute
Button 42 28 OMNI Mixer: Part 2 Mute
Button 43 29 OMNI Mixer: Part 3 Mute
Button 44 30 OMNI Mixer: Part 4 Mute
Button 45 31 OMNI Mixer: Part 5 Mute
Button 46 32 OMNI Mixer: Part 6 Mute
Button 47 33 OMNI Mixer: Part 7 Mute
Button 48 34 OMNI Mixer: Part 8 Mute

Button 49 5 Host Channel Browser: Half Speed

Button 50 6 Host Channel Browser: Double Speed
Button 51 51 OMNI All Play/Stop
Button 52 55 OMNI Edit: Global Reverse

Foot Switch 119 - -

Foot Controller 1 OMNI Master Level