Scribd
Upload
162 views1 page

Switch Actuator REG-K/12x230/16, With Manual Mode, Light Grey

This product data sheet summarizes the characteristics of a switch actuator that can independently switch 12 loads via make contacts. All 12 outputs can operate 230V loads and can be manually controlled via switches. It connects to the mains via screw terminals and to the KNX bus via a connecting terminal, without needing a data rail. A green LED indicates readiness after application load.

Uploaded by

Ricardo Carrasco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
162 views1 page

Switch Actuator REG-K/12x230/16, With Manual Mode, Light Grey

This product data sheet summarizes the characteristics of a switch actuator that can independently switch 12 loads via make contacts. All 12 outputs can operate 230V loads and can be manually controlled via switches. It connects to the mains via screw terminals and to the KNX bus via a connecting terminal, without needing a data rail. A green LED indicates readiness after application load.

Uploaded by

Ricardo Carrasco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product data sheet MTN648493

Characteristics Switch actuator REG-K/12x230/16, with manual mode,


light grey
tabanf

MTN648493
Switch actuator REG-K/12x230/16, with manual mode, light grey

tabanf

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
tabanf
Main

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
For independent switching of 12 loads via make contacts. All 230 V switch outputs can be operated with manual switch-
es. With integrated bus coupler.

tabanf
Complementary
The device is connected to the mains via screw terminals; every second L connection is bridged internally. For instal-
lation on DIN rails EN50022. The bus is connected using a bus connecting terminal; a data rail is not necessary. A
green LED indicates readiness for operation after the application has been loaded.

KNX software functions:


Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual
OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control,
scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure
and recovery, parameterisable download behaviour.

Nominal voltage: AC 230 V, 50-60 Hz


Per switch contact:
Nominal current: 16 A, cos =0.6
Incandescent lamps: AC 230 V, max. 3600 W
Halogen lamps: AC 230 V, max. 2500 W
Fluorescent lamps: AC 230 V, max. 2500 VA
Capacitive load: AC 230 V, 16 A, max. 200 F
Device width: 12 modules = approx. 216 mm

Contents: With bus connecting terminal and cable cover.

Colour: light grey

You might also like