140

1080p
Full HD

USERS MANUAL
WARNINGS THE BASICS
1. Always take the appropriate steps to protect your camera from falls, shock or impact.

2. Ensure a suitable distance is kept from any objects with strong magnetic interference Shutter/Select button
such as electrical machinery in order to avoid strong radio waves that may be damaging to
Microphone
the product and affect the sound or image quality. MicroSD slot
3. Never expose the product directly to high temperatures and prolonged strong sunlight.
Charging
status light
4. We recommend using high quality, class 10 or above Micro SD Card for the best results.

5. To avoid potential data error, avoid placing your Micro SD card near strong

magnetic objects.

6. In the unlikely event of overheating, unwanted smoke or unpleasant smell from

the device, unplug it immediately from the power outlet to prevent hazardous fire.
Micro
7. Keep the device out of reach of children while charging.
Power/Mode button USB port
8. The device should be stored in a dry and dust free location at normal room

temperature and out of direct sunlight. Lens

9. The product should only be charged via laptop or computer USB port.
Micro HDMI port
10. Before using your camera in the water please verify that all lids and locks

are tightly closed and sealed on the camera and the underwater case.

11. After use, clean the housing of salt and chlorine water and then let it dry.

12. The camera should not be exposed to large temperature and humidity Up/Playback button
differences to avoid condensation inside the housing or behind the lens.

13. After underwater use, the case must be kept open to avoid condensation or rust.

14. Recording times are dependant on resolution and frame rate settings.

After reaching a max. video recording time (or file size*) the camera will automatically

stop. It can only be restarted manually.

Speaker
*FAT32 file system has a maximum single file size limit of 4GB: 1080p/30fps: 29min. max.

15. Battery life time - depending on settings and outdoor temperature - up to 90 min.

under optimal conditions.

Screen

Down/Wi-Fi button
 MOUNTING YOUR CAMERA

Battery door latch Attach your camera to helmets, gear and equipment.

Battery door

WATERPROOF HOUSING

Latch
Select/Shutter button

Power/Mode button
GETTING STARTED

To power ON:
Press the Power/Mode Button.

To power OFF:
Press and hold the Power/Mode Button.

OVERVIEW
Turn the camera ON and repeatedly press the
Power/Mode Button to cycle through camera modes
and settings. The modes will appear in following
order:
 Video Record Video Time Stamp: Off/Date/Date & Time
Exposure: +-2.0/+-1.7/+-1.3/+-1.0/+-0.7/+-0.3/0
Photo Capture a single photo Photo Resolution: 12M, 8M, 5M, 2M
Burst Photo: 3 Photos
Burst Photo Capture photo bursts Time Lapse: 2s/3s/5s/10s/20s/30s/60s
Continuous Lapse: Off/On
Shoot a series of photos at
Time Lapse Power Frequency: 50Hz/60Hz/Auto
set time intervals
Language: English/Traditional
Video & Photo Playback Chinese/Italian/Spanish/Portuguese/German/Dutch/
France/Czech/Polish/Turkish/Russian/Japanese/Kor
Adjust camera settings,
ean/Thai
resolution and more
Date & Time: MM/DD/YY, DD/MM/YY, or YY/MM/DD
Sound Indicator: Shutter On/Off, Start Up 1/2/3/,
None, Beep On/Off, Volume 0/1/2/3
Rotate Display: On/Off (For use when camera is
mounted upside down)

Press the Shutter/Select Button to enter the

settings menu. Repeatedly press the Power/Mode
Button to cycle through options and press the
Shutter/Select Button to select desired option. Or
use the Up/Playback or Down/Wi-Fi Button to cycle
through the various options.
Screen Saver: Off/1 min/3 min/5 min After reaching a max. video recording time (or file size*)
Power Saver: Off/1 min/3 min/5 min the camera will automatically stop. It can only be restarted
Format: No/Yes manually.
Reset: No/Yes *FAT32 file system has a maximum single file size limit of 4GB:
Version: Displays current firmware version 1080p/30fps: 29min. max.

VIDEO MODE
PHOTO MODE

To record Video, verify the camera is in Video mode.

If the Video icon on your cameras LCD screen is not showing, To capture a Photo, verify the camera is in Photo mode. If the
press the Power/Mode Button repeatedly until it appears. Photo icon on your cameras LCD screen is not showing, press
To start recording: the Power/Mode Button repeatedly until it appears.
Press the Shutter/Select Button. The camera will emit one To take a photo:
beep and the Camera Status Lights will flash while recording. Press the Shutter/Select Button. The camera will emit the
To stop recording: camera shutter sound.
Press the Shutter/Select Button. The Camera Status Lights
BURST PHOTO MODE
stop flashing and the camera emits one beep to indicate
recording has stopped.
This camera automatically stops recording when the battery is
To capture a Burst Photo series, verify the camera is in Burst
out of power. Your Video will be saved before the camera
Photo mode. If the Burst Photo icon on your cameras LCD
powers OFF.
screen is not showing, press the Power/Mode Button
Recording times are dependant on resolution and frame rate
repeatedly until it appears. In Burst Photo mode, your camera
settings.
takes 3 photos in 1.5 seconds.
To take a Burst Photo series:
Press the Shutter/Select Button. The camera will emit
PLAYBACK
camera shutter sounds. Playing Back Videos and Photo

TIME LAPSE MODE

To enter the Playback menu:
1.Verify the camera is in Camera mode.
2.Press the Up/Playback Button to enter the
To capture a Time Lapse series, verify the Continuous Lapse
Playback menu.
is ON and camera is in Time Lapse mode. If the Time Lapse
3.Repeatedly press the Power/Mode Button to cycle
icon on your cameras LCD screen is not showing, press the
through Video and Photo.
Power/Mode Button repeatedly until it appears. In Time Lapse
4.Press the Shutter/Select Button to select desired
mode, your camera captures a series of photos at 2, 3, 5, 10,
option.
20, 30 or 60 second intervals.
5.Use Up/Playback Button or Down/Wi-Fi Button to
The intervals at which the camera will operate in Time Lapse
cycle through the various options.
mode must first be set using the settings screen before
6.Press the Shutter/Select Button.
recording in Time Lapse mode.
7.To return to the Playback menu, press the
Power/Mode Button.
To take Time Lapse:
8.To exit, hold down the Up/Playback Button for two
Press the Shutter/Select Button. The camera initiates
seconds.
countdown and emits the camera shutter sound each time a
Photo is taken.
STORAGE/MICRO SD CARDS

This camera is compatible with 16GB and 32GB

capacity microSD, microSDHC, and microSDXC
memory cards. You must use a microSD card with at CAMERA APP
least a Class 10 speed rating. We recommend using
brand name memory cards for maximum reliability Connecting to the Ez iCam App
in high-vibration activities.
The Ez iCam App lets you control your camera
remotely using a smartphone or tablet. Features
BATTERY include full camera control, live preview, photo
playback and sharing of select content and more.
Charging The Battery
1. Download the Ez iCam App to your smartphone or
1. Connect the camera to a computer or USB power
tablet at the Google Play or Apple App Store.
supply.
2. Press the Power/Mode Button to power camera
2. The Charging Status Light remains ON while the
ON.
battery is charging.
3. Make sure the camera is in Camera mode.
3. The Charging Status Light will turn OFF when the
4. Press the Down/Wi-Fi Button to turn on Wi-Fi*.
battery is fully charged.
5. In your smartphone or tablets Wi-Fi settings,
Charging Time: 5 hours
connect to the network called Pioneer followed by
a series of numbers.
6. Enter the password 1234567890.
7. Open the Ez iCam App on your smartphone or
COMPATIBILITY tablet.
Compatibility varies by device. Content playback, * Press and hold the Down/Wi-Fi Button for three
sharing and access to the cameras memory card seconds to turn OFF Wi-Fi.
might be not available on some devices.
 NOTE

The Ez iCam App is compatible with smartphones Before using your camera in the water please verify
and tablets listed below: that all lids and locks are tightly closed and sealed
on the camera and the underwater case.
After use, clean the housing of salt and chlorine
For Apple iOS
water and then let it dry.
* iPhone5, 5s, 6 (Plus), & 6s (Plus) (iOS9)
The camera should not be exposed to large
* iPad Air & Mini (iOS9) temperature and humidity differences to avoid
For Android condensation inside the housing or behind the lens.
* Android 4X Quad-core devices After underwater use, the case must be kept open
to avoid condensation or rust.

DECLARATION OF CONFORMITY
easypix herebly declares that the product GoXtreme Pioneer is in conformity
to all the essential requirements of Directive 1999/5/EC.
The declaration of conformity can be downloaded here:
http://www.easypix.info/download/pdf/doc_goxtreme_pioneer.pdf
For technical help please visit our support area on www.easypix.eu.