Magnetic Particle testing
EN ISO 3059:2001, Non-destructive testing Penetrant testing and magnetic particle testing
Viewing conditions (ISO 3059:2001)
EN ISO 9934-1:2001, Non-destructive testing Magnetic particle testing Part 1: General
principles
EN ISO 9934-2:2001, Non-destructive testing Magnetic particle testing Part 2: Detection
media
EN ISO 9934-3:2002, Non-destructive testing Magnetic particle testing Part 3: Equipment
EN 1369:1996 Founding - Magnetic particle inspection
EN 1290:1998, Non-destructive examination of welds Magnetic particle examination of welds
EN 10228-1:1998, Non-destructive testing of steel forgings Part 1: Magnetic particle testing
BS EN ISO 12707:2016, Non destructive testing- Magnetic particle testing-Vocabulary
BS EN ISO 23278-2015- Magnetic particle testing - Acceptance Level
[1] ISO 3057:1998, Non-destructive testing Metallographic replica techniques of surface
examination
[2] ISO 3058:1998, Non-destructive testing Aids to visual inspection Selection of low-
power magnifiers
[3] ISO 5817:2003, Welding Fusion-welded joints in steel, nickel, titanium and their alloys
(beam welding excluded) Quality levels for imperfections
[4] ISO 5580:1985, Non-destructive testing Industrial radiographic illuminators Minimum
requirements
[5] ISO 7963:1985, Welds in steel Calibration block No. 2 for ultrasonic examination of welds
[6] [7] EN ISO 3452-3:1998, Non-destructive testing Penetrant testing Part 3: Reference
test blocks(ISO 3452-3:1998)
[8] EN ISO 3452-4:1998, Non-destructive testing Penetrant testing Part 4: Equipment
(ISO 3452-4:1998)
[9] EN ISO 6520-1:1998, Welding and allied processes Classification of geometric
imperfections in
metallic materials Part 1: Fusion welding
[10] EN ISO 6520-2:2001, Welding and allied processes Classification of geometric
imperfections in metallic materials Part 2: Welding with pressure
[11]
[12]
[13] EN ISO 12706:2000, Non-destructive testing Terminology Terms used in penetrant
testing
[14] EN 444:1994, Non-destructive testing General principles for radiographic examination
of metallic materials by X- and gamma-rays
[15] EN 462-1:1994, Non-destructive testing Image quality of radiographs Part 1: Image
quality indicators (wire type) Determination of image quality value
[16] EN 462-2:1994, Non-destructive testing Image quality of radiographs Part 2: Image
quality indicators (step/hole type) Determination of image quality value
[17] EN 462-3:1996, Non-destructive testing Image quality of radiographs Part 3: Image
quality classes for ferrous metals
[18] EN 462-4:1994, Non-destructive testing Image quality of radiographs Part 4:
Experimental evaluation of image quality values and image quality tables
[19] EN 462-5:1996, Non-destructive testing Image quality of radiographs Part 5: Image
quality indicators (duplex wire type), determination of image unsharpness value
[20] EN 473:2000, Non-destructive testing Qualification and certification of NDT personnel
General principles
[21] EN 571-1:1997, Non-destructive testing Penetrant testing Part 1: General principles
[22] EN 583-1:1998, Non-destructive testing Ultrasonic examination Part 1: General
principles
[23] EN 583-2:2001, Non-destructive testing Ultrasonic examination Part 2: Sensitivity
and range setting
[24] EN 583-3:1997, Non-destructive testing Ultrasonic examination Part 3: Transmission
technique
[25] EN 583-4:2002, Non-destructive testing Ultrasonic examination Part 4: Examination
for discontinuities perpendicular to the surface
[26] EN 583-5:2000, Non-destructive testing Ultrasonic examination Part 5:
Characterization and sizing of discontinuities
[27] ENV 583-6:2000, Non-destructive testing Ultrasonic examination Part 6: Time-of-
flight diffraction technique as a method for detection and sizing of discontinuities
[28] EN 584-1:1994, Non-destructive testing Industrial radiographic film Part 1:
Classification of film systems for industrial radiography
[29] EN 584-2:1996, Non-destructive testing Industrial radiographic film Part 2: Control
of film processing by means of reference values
[30] EN 970:1997, Non-destructive examination of fusion welds Visual examination
[31]
[32] EN 1289:1998, Non-destructive examination of welds Penetrant testing of welds
Acceptance levels
[33]
[34] EN 1330-1:1998, Non-destructive testing Terminology Part 1: List of general terms
[35] EN 1330-2:1998, Non-destructive testing Terminology Part 2: Terms common to the
nondestructive testing methods
[36] EN 1330-3:1997, Non-destructive testing Terminology Part 3: Terms used in
industrial radiographc testing
[37] EN 1330-4:2000, Non-destructive testing Terminology Part 4: Terms used in
ultrasonic testing
[38] EN 1330-5:1998, Non-destructive testing Terminology Part 5: Terms used in Eddy
current testing
[39] EN 1330-8:1998, Non-destructive testing Terminology Part 8: Terms used in leak
tightness testing
[40] EN 1330-9: 2000, Non-destructive testing Terminology Part 9: Terms used in acoustic
emission testing
[41] EN 1330-10:2003, Non-destructive testing Terminology Part 10: Terms used in visual
testing
[42] EN 1370:1996, Founding Surface roughness inspection by visualtactile comparators
[43] EN 1371-1:1997, Founding Liquid penetrant inspection Part 1: Sand, gravity die and
low pressure die castings
[44] EN 1435:1997, Non-destructive examination of welds Radiographic examination of
welded joints [45] EN 1593:1999, Non-destructive testing Leak testing Bubble emission
techniques
[46] EN 1779:1999, Non-destructive testing Leak testing Criteria for method and technique
selection
[47] EN 10163-1:2004, Delivery requirements for surface conditions of hot-rolled steel plates,
wide flats and sections Part 1: General requirements
[48] EN 10163-2:2004, Delivery requirements for surface condition of hot-rolled steel plates,
wide flats and sections Part 2: Plates and wide flats
[49] EN 10163-3:2004, Delivery requirements for surface condition of hot rolled steel plates,
wide flats and sections Part 3: Sections
[50]
[51] EN 10228-2:1998, Non-destructive testing of steel forgings Part 2: Penetrant testing
[52] EN 12062:1997, Non-destructive examination of welds General rules for metallic
materials
[53] EN 12084:2001, Non-destructive testing Eddy current testing General principles and
guidelines
[54] EN 12223:1999, Non-destructive testing Ultrasonic examination Specification for
calibration block No. 1
[55] EN 12454:1998, Founding Visual examination of surface discontinuities Steel sand
castings
[56] EN 12517:1998, Non-destructive examination of welds Radiographic examination of
welded joints Acceptance levels
[57] EN 12543-1:1999, Non-destructive testing Characteristics of focal spots in industrial X-
ray systems for use in non-destructive testing Part 1: Scanning method
[58] EN 12543-2:1999, Non-destructive testing Characteristics of focal spots in industrial X-
ray systems for use in non-destructive testing Part 2: Pinhole camera radiographic method
[59] EN 12543-3:1999, Non-destructive testing Characteristics of focal spots in industrial X-
ray systems for use in non-destructive testing Part 3: Slit camera radiographic method
[60] EN 12543-4:1999, Non-destructive testing Characteristics of focal spots in industrial X-
ray systems for use in non-destructive testing Part 4: Edge method
[61] EN 12543-5:1999, Non-destructive testing Characteristics of focal spots in industrial X-
ray systems for use in non-destructive testing Part 5: Measurement of the effective focal spot
size of mini and micro focus X-ray tubes
[62] EN 12668-3:2000, Non-destructive testing Characterization and verification of
ultrasonic examination equipment Part 3: Combined equipment
[63] EN 12679:1999, Non-destructive testing Determination of the size of industrial
radiographic sources Radiographic method
[64] EN 12681:2003, Founding Radiographic examination
[65] EN 12732:2000, Gas supply systems Welding steel pipework Functional requirements
[66] EN 12952:2001, Water-tube boilers and auxiliary installations
[67] EN 13018:2001, Non-destructive testing -Visual testing General principles
[68] EN 13068-1:1999, Non-destructive testing Radioscopic testing Part 1: Quantitative
measurement of imaging properties
[69] EN 13068-2:1999, Non-destructive testing Radioscopic testing Part 2: Check of long
term stability of imaging devices
[70] EN 13068-3:2001, Non-destructive testing Radioscopic testing Part 3: General
principles of radioscopic testing of metallic materials by X- and gamma rays
[71] EN 13184:2001, Non-destructive testing Leak testing Pressure change method
[72] EN 13185:2001, Non-destructive testing Leak testing Tracer gas method
[73] EN 13445-5:2002, Unfired pressure vessels Part 5: Inspection and testing
[74] EN 13477-1:2001, Non-destructive testing Acoustic emission Equipment
characterization Part 1: Equipment description
[75] EN 13477-2:2001, Non-destructive testing Acoustic emission Equipment
characterization Part 2: Verification of operating characteristic
[76] EN 13554:2002, Non-destructive testing Acoustic emission General principles
[77] EN 13625:2001, Non-destructive testing Leak test Guide to the selection of
instrumentation for the measurement of gas leakage
[78] EN 13860-1:2003, Non-destructive testing Eddy current examination Equipment
characteristics and verification Part 1: Instrument characteristics and verification
[79] EN 13860-2: 2003, Non-destructive testing Eddy current examination Equipment
characteristics and verification Part 2: Probe characteristics and verification
[80] EN 13927:2003, Non-destructive testing Visual testing Equipment
[81] EN 25580:1992, Non-destructive testing Industrial radiographic illuminators
Minimum requirements
[82] EN ISO 5817:1992, Arc-welded joints in steel Guidance on quality levels for
imperfections
[83] EN 27963:1992, Welds in steel Calibration block No. 2 for ultrasonic examination of
welds
