2014 Volkswagen Tiguan 88297

Side view
Fig. 1 Vehicle side overview.
Key to fig. 1:
(1) Fuel filler flap
(2) Roof antenna for:
Mobile phone
Navigation
(3) Outside door handles
(4) Outside mirror
Additional turn signal light
(5) Lift points for the jack
(6) Roof rack
(7) Side window with integrated antenna
(8) Trailer hitch/ball mount receiver
Front view
Fig. 2 Vehicle front overview.
Key to fig. 2:
(1) Sensor on mirror base for:
Low-light sensor
Rain sensor
(2) Windshield wipers
(3) Engine hood release
(4) Headlights (on both left and right) ,
(5) Fog lights/static cornering lights (on both left and right) ,
(6) Threaded hole for the front towing eye (behind cover)
Rear view
Fig. 3 Vehicle rear overview.
Key to fig. 3:
(1) Rear window:
Rear window defroster
Rear window wiper
(2) High-mounted brake light
(3) Taillights (on both left and right)
(4) Area of:
Rear hatch release
Rear Assist camera
(5) License plate lighting
(6) Threaded hole for the rear towing eye (behind cover)
(7) Roof antenna:
Mobile phone
Navigation
(8) Trailer hitch/ball mount receiver
(9) Backup lights and rear reflectors (on both left and right)
Driver door overview
Fig. 4 Overview of controls in the driver door.
Key to fig. 4:
(1) Door handle
(2) Power locking button for locking and unlocking the vehicle
(3) Switch for adjusting the outside mirror:
Adjusting outside mirrors
Outside mirror heating
(4) Buttons for operating the power windows:
Power windows
Safety switch for rear power windows
(5) Indicator light for power locking system
(6) Lever for releasing the engine hood
(7) Storage compartment
(8) Bottle holder
(9) Reflector
Driver side overview
Fig. 5 Driver side overview.
Key to fig. 5:
(1) Instrument cluster:
Instruments
Display
Warning and indicator lights
(2) Headlight switch :
Off position - -
Low beams
Fog lights
(3) Lever for:
High beams
Headlight flasher 1x
Turn signal
Cruise Control System (CCS)
(4) Windshield wiper and washer lever:
Windshield wiper
Intermittent operation for windshield wipers
One-tap wiping x
Windshield wiper
Automatic wipe/wash for windshield
Rear window wiper
Automatic wipe/wash for rear window
Lever with buttons for the Volkswagen Information System (Basic version) , /
(5) Multi-function steering wheel controls
Volume setting for radio programs, navigation system notifications, or telephone calls
Mute switching for radio or activation of voice control
Display Phone main menu or accept telephone calls
Audio, Navigation
Control switches for the Volkswagen Information System (Premium version) #

(6) Ignition switch (vehicles without Keyless Access)
(7) Dimmer control for the instrument and switch illumination
(8) Lever for adjustable steering wheel
(9) Horn (only works when the ignition is switched on)
(10) Pedals
(11) Driver front airbag
(12) Air vents
Center console overview
Upper center console
Fig. 6 Overview of upper center console.
Key to fig. 6:
(1) Switch for emergency flashers
(2) PASSENGER AIR BAG light (front airbag for front seat passenger)
(3) Radio or Radio & Navigation system (factory-installed) Booklet Radio or
Booklet Navigation system
(4) Controls for:
Manual A/C
Climatronic
(5) Air vent for indirect ventilation
(6) Seat heating buttons
(8) Card holder
Lower center console
Fig. 8 Vehicles without Keyless Access: Overview of center console lower section.
Fig. 9 Vehicles with Keyless Access: Overview of center console lower section.
Key to fig. 8 :
(1) Levers for:
Manual transmission
Automatic transmission
(2) Button for:
Electronic parking brake
(3) Cup holders
(4) Storage compartment in the center console
(5) Storage compartment with 12 Volt socket
(6) Card holder
Key to fig. 9:
(1) Levers for:
Manual transmission
(2) Button for:
(3) Cup holders
(4) Storage compartment in the center console
(5) Starter button for Keyless Access locking and starting system
(6) Card holder
(7) 12 Volt socket
Front passenger side overview
Fig. 10 Overview of the front passenger side.
Key to fig. 10:

(1) Passenger front airbag location in the instrument panel (approximate)
(2) Opening handle for the lockable glove compartment
(3) Air vents
Symbols on the roof console
Symbol Meaning
Interior and reading lights
Power sunroof
Three-button module booklet Mobile phone package

Instrument cluster
Introduction
In this section youll find information about:
Instrument overview
Instrument overview
Displays
Displays
Compass
Service reminder display
More information:
Volkswagen Information System
Shifting
Service reminder information booklet Warranty and Maintenance
WARNING
Driving on today's roads demands the full attention of the driver at all times. Driver
distraction causes accidents, collisions and serious personal injury!
Never use the buttons in the instrument cluster while driving.
Instrument overview
Fig. 11 Instrument cluster in the instrument panel.
Please first read and note the introductory information and heed the WARNINGS
Instrument explanations fig. 11:
(1) Speedometer.
(2) Tachometer (shows engine revolutions per minute in thousands). The red zone at the end of
the scale indicates maximum permissible engine rpm (revolutions per minute) for all gears after
the break-in period. Before reaching the red zone, select the next higher gear or selector level
position Drive (D), or ease your foot off the accelerator .
(3) Displays 13.
(4) Reset button for the trip odometer display trip.
Push and hold the 0.0 / SET button about one second in order to reset to zero.
Push and hold the 0.0 / SET button for more than 10 seconds to display the vehicle's
engine code. You must do this when the ignition is on, but the engine is not running.
(5) Fuel gauge 272.
(6) Button for setting the instrument cluster clock, the Radio or Radio & Navigation system
clock1.
With the ignition on, push the button to highlight the hour or the minutes in the clock
display.
To advance the clock, push the 0.0 / SET button (7). Press and hold the button to fast
forward.
Push the button again to finish setting the clock.
(7) Engine coolant temperature display
NOTICE
To help prevent engine damage, always avoid high engine speeds, full throttle acceleration
and heavy engine loads when the engine is cold.
To help prevent engine damage, the tachometer needle should only enter the red zone
(warning zone) briefly.
Upshifting early into the next higher gear saves fuel and reduces engine noise.
1
On appropriately equipped vehicles, the clocks can also be set via the Settings menu in the instrument
cluster display Settings menu.
Displays
Fig. 13 In the instrument cluster display: A: Open engine hood, B: Open rear hatch, C: Open front driver side
door, D: Open rear passenger side door.
Depending on the vehicle model, different information may be shown in the instrument cluster display
fig. 11 (4) fig. 12 (4).
Warning and information texts
Odometer displays
Time
Outside temperature
Compass display
Selector lever position
Gear recommendation (manual transmission)
Multi-Function Indicator (MFI) and menus for different settings
Warning and information texts

The status of various vehicle functions and components is monitored when the ignition is switched on
and while driving. Malfunctions are indicated by red and yellow warning symbols with text messages in
the instrument cluster display ( Warning and indicator lights). In some cases, they may also be
signaled acoustically. The display can vary depending on the instrument cluster model.
Type of Symbol Explanation

notification color
Priority 1 Red Symbol flashing or lit sometimes with acoustic warnings.

warning Stop!
message Check malfunction and take corrective action. Contact an authorized
Volkswagen dealer or an authorized Volkswagen Service Facility for
assistance if necessary.
Menus cannot be accessed when a priority 1 warning message is
displayed. The warning message will turn off automatically after a few
seconds. You can confirm and turn off some warning messages using the
OK button.
Type of Symbol Explanation
notification color
Priority 2 Yellow Symbol flashing or continuously lit sometimes with acoustic warnings.
warning Malfunctions or low operating fluid levels may cause vehicle damage and
message
vehicle breakdown .
Check malfunction as soon as possible. Contact an authorized Volkswagen
dealer or an authorized Volkswagen Service Facility for assistance if nec-
essary.
Information Information about various vehicle situations.

text
Odometer displays
The odometer indicates the distance driven by the vehicle.
The trip odometer (Trip) shows the distance driven since the last time the trip odometer was reset.
The last digit indicates 1/10 mile (100 meters).
Outside temperature display

At outside temperatures below about +39 F (+4 C), a snowflake symbol (icy road warning) appears
in the display. The symbol flashes at first, then stays on until the outside temperature rises above
+43 F (+6 C) .
When the vehicle is not moving, is operating, or when you are driving at very low speeds, the
temperature displayed may be slightly higher than the actual outside temperature.
The measurement range is from -40 F (-40 C) to +122 F (+50 C).
Compass display
On vehicles equipped with compass display, the current compass direction is indicated in the instru-
ment cluster display when the ignition and navigation system are switched on Compass.
Selector lever positions

The selector lever position is shown both on the side of the selector lever and in the instrument cluster
display. The respective gear may also be shown in the instrument cluster display in Drive (D) and
Sport Drive (S), as well as in Tiptronic mode.
Gear recommendation (manual transmission)

While the vehicle is moving, a fuel economy gear recommendation is indicated in the instrument
cluster display Shifting.
WARNING
Failure to heed warning lights and instrument cluster text messages can cause the vehicle to
break down in traffic and result in a collision and serious personal injury.
Never ignore warning lights or text WARNINGS.
Always stop the vehicle as soon as it is safe to do so.
Park the vehicle at a safe distance from moving traffic and where no part of the hot
catalytic converter and exhaust system can come into contact with flammable materials
under the vehicle, such as dry grass, brush, spilled fuel, etc.
A broken down vehicle presents a high accident risk for itself and others. Switch on
emergency flashers and set up a warning triangle to warn oncoming traffic.
WARNING
Roads and bridges may be dangerously icy even if the outside air temperature is above
freezing.
If you use the outside temperature display to tell you about frost conditions, remember
that roads can even ice over at temperatures above +39 F (+4 C). Always remember: even if
the snowflake symbol (ice warning) is not displayed, there could still be black ice on the
road.
Never rely exclusively on the outside temperature display.
NOTICE
Failure to heed warning lights or text WARNINGS can result in vehicle damage.
The instrument cluster displays and their arrangement may vary depending on the vehicle model
and engine. For displays without warning and information messages, malfunctions are only signaled
with indicator lights.
If there are multiple warning messages, the symbols are displayed for several seconds in order of
importance. The symbols are displayed until the cause has been corrected.
Compass
Fig. 15 Compass zones.

The compass does not need to be calibrated in vehicles with a factory-installed navigation system.
There is no Compass menu item in this case.
On vehicles without a factory-installed navigation system that have the Premium instrument cluster,
the compass is calibrated automatically. If electrical or metallic accessories are added to the vehicle,
the compass must be manually recalibrated.
Adjusting the compass zone

Switch on the ignition.
Select the Settings menu followed by the Compass and Zone menu items.
Select the compass zone according to the current location fig. 15.
Adjust and confirm compass zone (1-15).
Calibrating the compass

In order to calibrate the compass, you need a valid compass zone for the location and enough room to
drive in a circle.
Select the Settings menu followed by the Compass and Calibration menu items.
Confirm the Please drive a full circle to calibrate message by pressing the OK
button on the multi-function steering wheel, and then drive in a complete circle at about 6 mph
(10 km/h).
During calibration, CAL is shown in the instrument cluster display. The calibration is complete when
the compass direction is displayed.

The service appointment reminder is shown in the instrument cluster display fig. 11 (4) fig. 12
(4).
For information on maintenance intervals please see the booklet Warranty and Maintenance
booklet.
For vehicles with time- or distance driven-dependent service, only fixed service intervals are dis-
played.
Service reminder
If service is due in the near future, a service reminder is displayed when the ignition is switched on.
For vehicles without text messages (Basic instrument cluster), a wrench symbol and a miles
(kilometers) indicator are shown in the instrument cluster display. The distance shown in
miles (kilometers) is the maximum distance the vehicle can be driven without having a service com-
pleted. A clock symbol is displayed and the number of days until the required service is shown.
For vehicles with text messages (Premium instrument cluster), Oil change and Inspection are
shown in the instrument cluster display with the number of miles (kilometers) and days remaining until
service is due.
Service event
For vehicles without text messages, a warning chime sounds when the ignition is switched on, and a
flashing wrench symbol is displayed for several seconds when service is due.
For vehicles with text messages, Oil change now! or Inspection now! is indicated in the in-
strument cluster display.
Viewing service message

The current service message can be accessed when the ignition is switched on, the engine is
switched off, and the vehicle is stopped:
For vehicles without text messages: Push the button in the instrument cluster several
times until the wrench symbol appears.
For vehicles with text messages Select the Settings menu.
In the Service sub-menu, select the Info menu item.
OR: If the Vehicle status main menu is active, use the arrow buttons to navigate to the service
reminder display.
A minus sign in front of the number of miles (kilometers) or days means that service is overdue.
Resetting the oil change service reminder

If the service was not performed by an authorized Volkswagen dealer or an authorized Volkswagen
Service Facility, the oil change service reminder can be reset as follows:
Vehicles with Premium display:
Switch off the ignition.
Press and hold the . / button in the instrument cluster.
Release the . / button.
A confirmation message appears in the display. Confirm request with the

button on the multi-function steering wheel.
Vehicles with Basic display:
Release the . / button and push the button in the instrument

cluster within about 20 seconds.
Resetting the inspection service reminder

If the service was not performed by an authorized Volkswagen dealer or an authorized Volkswagen
Service Facility, the inspection service reminder can be reset as follows:
Vehicles with Premium display:
Switch on the emergency flashers.
A confirmation message appears in the display. Confirm request with the

Switch off the emergency flashers.
Vehicles with Basic display:
Switch on the emergency flashers.
Release the . / button and push the button in the instrument

cluster within about 20 seconds.
Switch off the emergency flashers.
The service reminder disappears after a few seconds when the engine is running or the OK
button on the multi-function steering wheel has been pushed.
Introduction
Menu structure overview: Basic version
Menu structure overview: Premium version
Using the instrument cluster menus: Basic version
Using the instrument cluster menus: Premium version
Main menus: Premium version
MFI menu (Multi-Function Indicator): Premium version
Settings menu
Convenience sub-menu
Lights and Vision sub-menu
When the ignition is switched on, you can display different types of information in the instrument
cluster. The menu options vary depending on whether you have a Basic or Premium version of the
Volkswagen Information System. With the Premium instrument cluster display, you can also control
certain vehicle features.
Buttons on the windshield wiper lever operate the menus for Basic instrument cluster. The Premium
version has control buttons on the right side of the multi-function steering wheel.
The number of menus in the instrument cluster display depends on the electronics and equipment on
the vehicle.
An authorized Volkswagen dealer or an authorized Volkswagen Service Facility may be able to add or
modify functions depending on your vehicle's equipment.
Some menu items can only be accessed when the vehicle is not moving.
As long as a priority 1 warning message is displayed, no menus can be accessed on vehicles with the
Premium instrument cluster. In order to display menus, acknowledge the warning by pressing the OK
More information:
Outside mirrors
Driver assistance systems
Radio or navigation system booklet Radio or Chapter Navigation System
Mobile phone package booklet Mobile phone package
WARNING
Driving on today's roads demands the full attention of the driver at all times. Driver distrac-
tion causes accidents, collisions and serious personal injury!
Never access menus when the vehicle is moving.
Emergency starting and starting the engine with a very weak vehicle battery or after the vehicle
battery has been replaced may change or delete system settings (including time, date, personal con-
venience settings and programming). Check the settings and correct as necessary once the vehicle
battery has built up a sufficient charge.

The instrument cluster display is divided into 3 parts. The time (digital clock) is displayed in the top
part. The bottom part contains the odometer and the trip odometer trip. You can select the following
displays for the middle part:
and fuel range estimate
xx miles (trip memory 1 and 2)
--- mph (average speed)
(speed warning)
-- F (outside temperature)
Travel time
--- mpg (current fuel consumption)
--- mpg (average fuel consumption)

The instrument cluster display is divided into 3 parts. The time (digital clock) is displayed in the top
part. The bottom part contains the odometer and the trip odometer trip. You can select the following
displays for the middle part:
Multi-Function Indicator (MFI) MFI menu (Multi-Function Indicator): Premium version

Travel time
Consumption --.- mpg (current fuel consumption)
Av. consumption --.- mpg (average fuel consumption)
Route
Average speed
Digit. speed (digital speed display)
Speed warning
Audio booklet Radio or booklet Navigation system
Navigation booklet Navigation system
Phone booklet Mobile phone package
Vehicle status Main menus: Premium version
Settings Settings menu
Language
MFI Data
Travel time
Curr. consum. (current fuel consumption)
Av. consum. (average fuel consumption)
Route
Av. speed
Digit. speed (digital speed display)
Speed warn. (speed warning)
Compass (vehicles without navigation system)
Convenience Convenience sub-menu
ATA confirm
Central locking
Auto unlock
Unlock doors
Window op. (Window operation)
Off
All
Driver
Mirror Adj.. (Mirror adjust)
Individually
Both mirrors
Mirror down (vehicles with memory seats)
Back
Factory Set. (Factory setting).
Lights / Vision
Coming home
Leaving home
Footwell light
Conv. turn sig. (convenience turn signal)
Factory setting
Time
Hours
Minutes
24 hr. mode
Daylight save
Snow tires (winter tires)
On
+ 5 mph
- 5 mph
Units
Temperature
Consump./ dist.
Service
Info
Back
Tire Monitor Tire Pressure Monitoring System (TPMS)
Factory setting
Using the instrument cluster menus: Basic version
Fig. 16 Basic version (vehicles without menu control multi-function steering wheel): Control buttons 1 and 2
on the windshield wiper lever.
In the Basic version, the instrument cluster displays are controlled by the OK/RESET button and the
TRIP rocker switch on the windshield wiper lever ( fig. 16 (1) and (2)).
Switch on the ignition. The instrument cluster display is divided into 3 parts. The time (digital clock) is
displayed in the top part. The bottom part contains the odometer and the trip odometer trip. The
display in the middle part is selected by pushing the TRIP rocker switch (2) on the end of the wind-
shield wiper lever.
The available displays are as follows:

Fuel range estimate (estimated distance you can drive with the fuel remaining in the tank).
Trip memory 1 (single trip memory) and trip memory 2 (total trip memory).
Push the OK/RESET button (1) on the windshield wiper lever to toggle between trip memories 1
and 2.
Push and hold the OK/RESET button to reset a trip memory to 0.
The function of the 2 trip memories is explained in MFI menu (Multi-Function Indicator): Premi-
um version. The 2 trip memories are in addition to the trip odometer, which is displayed in the bot-
tom part of the instrument cluster and controlled using the 0.0/SET button on the right of the in-
strument panel fig. 11, fig. 12.
--- mph ( --- km/h) shows the average speed on trips per trip memories 1 and 2.
Push the OK/RESET button on the windshield wiper lever to toggle between the 2 average speed
figures.
--- mph ( --- km/h) or xx mph (xx km/h). Use this menu to set or disable the speed warning
feature.
Push the OK/RESET button to toggle between --- mph (--- km/h) (speed warning disabled) and xx
mph (xx km/h).
A warning chime will sound you if you reach the set speed; there may also be a visual message.
The set speed will blink for a few seconds after you toggle to xx mph (xx km/h).
Press the TRIP rocker switch (2) while the set speed is flashing to increase or decrease the speed.
Outside temperature.
Travel time since last reset of trip memories 1 and 2.
Push the OK/RESET button to toggle between the 2 time figures.
--- mpg (l/100 km) current fuel consumption.
--- mpg ( l/100 km) average fuel consumption of trips per trip memories 1 and 2.
Push the OK/RESET button to toggle between the 2 figures.
Using the instrument cluster menus: Premium version
Fig. 17 Premium version (vehicles with menu control multi-function steering wheel): Buttons on the right side
of the steering wheel.
On vehicles with menu control multi-function steering wheels (Premium version), the instrument cluster
menus are controlled with buttons on the right side of the steering wheel fig. 17.
Accessing the instrument cluster menus

Switch on the ignition. You will see the vehicle icon or a message in the instrument cluster display.
Push the OK button on the right side of the multi-function steering wheel until a main menu ap-
pears in the instrument cluster display. For a list of main menus, see Menu structure overview:
Premium version, Menu structure overview: Premium version.
Push buttons # or to move to another main menu, and push the arrow up and down buttons
and to navigate inside the current main menu. For example, in the Settings main menu, press
the arrow down button to navigate to the MFI data sub-menu.
Displaying sub-items
Press the OK button to display sub-items located behind the items in a menu. For instance, after
scrolling to MFI data in the Settings main menu, press the OK button to display the various MFI
data sub-items (Travel time, curr. consum., etc.).
Selecting a setting
Some menus are used to select settings for certain features. Push the OK button () to select a
setting. For example, the 2 settings under Mirror adjust (Settings > Convenience > Mirror adjust)
are Individually and Both mirrors. After navigating to these items, use the arrow up and down
buttons to highlight one and then push the OK button to select this setting.
Returning to the higher menu level

Use the arrow down button to select Back and then press the OK button ().
Main menus: Premium version

There are 6 main menus:
Main menus Function See
MFI Multi-Function Indicator (MFI) information.
Station indicator in radio mode. booklet Radio or

Audio Track display in CD mode. booklet Navigation
Track display in media mode.
system
Information displays on the navigation system: booklet Navigation

When destination guidance is active, turn arrows and
proximity bars are shown. The illustration is similar to the system
Navigation
symbol display in the navigation system.
If destination guidance is inactive, driving direction (com-
pass function) and the current street name are displayed.
booklet Mobile
Phone Information and settings of the mobile phone package.
Phone Package
Current warning and information messages.

Vehicle This menu item is only displayed when warning or infor-
status mation messages are available. The number of available
messages is shown in the display. Example: 1/1 or 2/2.
Includes the Convenience and Lights & Vision sub-menus,

Settings as well as many settings such as time, speed warning for
winter tires, language, units and Display OFF.
MFI menu (Multi-Function Indicator): Premium version

The MFI menu has 2 automatic trip memories: 1 single trip memory and 2 total trip memory.
The number of the memory is shown at the upper right of the display. The trip memories are in addi-
tion to the trip odometer, which is displayed in the bottom part of the instrument cluster and controlled
using the 0.0/SET button on the right of the instrument panel fig. 11 (7), fig. 12 (7).
To display the distance driven on trips 1 and 2, select the Route item in the MFI menu (MFI >
Route). Press the OK button ( fig. 17) to toggle between Route 1 and Route 2 (trip 1 and trip 2).
Push and hold the OK button to manually reset a trip memory to 0.
The memory accumulates and stores information about distance driven and
fuel used from the time the ignition was switched on until the time it was
Single trip switched off.
1
memory If the ignition stays off for 2 hours or more, stored information is automatically
deleted. If the trip is continued within 2 hours after the ignition was switched
off, the new values are added.
The memory displays and stores the accumulated driving and fuel consump-
tion data of any number of single trips up to a total driving time of 99 hours
Total trip
2 and 59 minutes, and up to a total distance of 9999 miles (9999 km), depend-
memory
ing on the instrument cluster version. If one of the maximum values is ex-
ceeded, then the memory is automatically cleared and starts again from 0.
Possible MFI menu displays

The following displays can be accessed in the MFI menu if enabled under Settings > MFI data.
Displays that are not enabled will not appear.
Display Function
Driving time in hours (h) and minutes (min) corresponding to trip mem-
Travel time
ories 1 and 2 (toggle).
Current fuel consumption in miles per gallon (l/100 km) while driving.
When units are set to miles, dashes appear instead of a number when
Curr. consumption --
the engine is running and the vehicle is standing still.
- mpg
When units are set to kilometers, the display shows liters consumed
per hour when the engine is running and the vehicle is standing still.
Average fuel consumption in miles per gallon (l/100 km) on trips per trip
Av. consumption -- memories 1 and 2 (toggle) is displayed once the vehicle has been
- mpg driven about 330 feet (100 m). Until then, dashes appear instead of a
number. The value displayed is updated every 5 seconds.
Estimated distance in miles (km) that the vehicle can go with the fuel
Range left in the tank the way you are currently driving. Takes account of the
current fuel consumption, among other things.
Route Distance driven in miles (km) per trip memories 1 and 2 (toggle).
Average speed on trips per trip memories 1 and 2 (toggle). Displayed

once the vehicle has been once the vehicle has been driven about 300
Av. speed
feet (100 m). Until then, dashes appear instead of a number. The value
displayed is updated every 5 seconds.
Digit. speed Digital display of current vehicle speed.
When the set speed (from 20 to 155 mph - 30 to 250 km/h) is exceed-
Speed warn. --- mph
ed, an acoustic warning sounds, and a visual message may also ap-
(km/h)
pear in the instrument cluster display.
Switching between the displays

Use the arrow up and down buttons ( and ) on the multi-function steering wheel.
Storing speed for the speed warning

Navigate to MFI > Speed warning (Speed warning at --- mph).
Press the OK button to save the current speed and to activate the warning.
If the speed is not right, press buttons or on the multi-function steering wheel to set a differ-
ent speed within about 5 seconds. Then press the OK button a second time or just wait a few se-
conds. The speed is saved and the warning is activated.
To deactivate, toggle to --- mph and press the OK button. The set speed is deleted.
Manually erasing trip memory 1 or 2

Navigate to MFI > Route.
Select the memory to be erased.
Press the OK button for about 2 seconds.
Enabling and disabling displays

Use the Settings menu, submenu MFI data (Settings > MFI data) to enable displays you want to
be available under the MFI menu in the instrument cluster display. The units in which data is displayed
can also be changed Settings menu.
Settings menu
Settings menu Function
Language Set language for messages in the display and navigation system.
MFI Data Enable the features you want to be available under the MFI menu in the in-
strument cluster display MFI menu (Multi-Function Indicator): Premium
version.
Compass Calibrating the compass on vehicles without a factory-installed navigation

system. To calibrate, follow instructions in the instrument cluster display 16.
Convenience Convenience function settings
Lights & Vehicle lighting settings

Vision
Time Set hours and minutes for the instrument cluster clock and in the Radio Navi-
gation System clock. The digital clocks can be set to show the time in 12 or
24 hour format. Resetting clocks to daylight savings time or standard time.
Snow tires Set up visual and acoustic speed warning. Use the feature only when winter
tires are installed that have a speed rating less than top vehicle speed.
Units Set units for temperature, fuel consumption and distances should be displayed
(for example, whether to show distance driven in miles or kilometers).
Tire pressure Reset the tire pressure, for example after replacing tires.
Service Display service messages or reset service interval display.

Settings menu Function
Factory Resets the functions in the Settings menu to the default factory settings.
settings
Back The display returns to the main menu.
Convenience sub-menu
Convenience
Function
menu
The horn beeps once when the vehicle is locked with the remote control vehi-
ATA confirm
cle key if ATA confirm is checked
Doors are unlocked as follows depending on the option select-

ed:
All doors: Pushing the unlock button on the remote con-
trol vehicle key, unlocks all doors and the rear hatch.
Single door: Pushing the unlock button on the remote
control vehicle key unlocks only the driver door. To unlock all
doors and the rear hatch, push the unlock button on the key
a second time within about 5 seconds.
Auto
On vehicles with Keyless Access, touching the sensor surface
unlock
of the door handle on the side where the valid vehicle key is
located unlocks the respective door.
Vehicle side: Pushing the unlock button on the remote
Central control vehicle key unlocks the doors on the driver side of the
locking vehicle. On vehicles with Keyless Access touching the sensor
43 surface of a door handle on the side where the valid remote
control vehicle key is located unlocks the doors on that side of
the vehicle.
Auto unlock: You can enable or disable Auto unlock. If Auto

unlock is enabled (box checked), it is triggered on vehicles
without Keyless Access by taking the key out of the ignition.
On Keyless Access vehicles, Auto unlock is triggered by open-
Unlock
ing the driver door. Auto unlock works only if the vehicle has
doors
been automatically locked after reaching a speed of 10 mph
(15 km/h) 42. It unlocks the doors that would be unlocked if
you pushed the unlock button on the remote control vehicle
key once.
Power window settings: When unlocking/locking the vehicle from the driver
Window adjust door with the fold out key bit (mechanical key), all windows can be opened or
closed. by holding the key in the open/close position.
Tilts passenger mirror down when backing up so you can see the curb. Feature
Mirror down
only available on vehicles equipped with memory seats.
Convenience
Function
menu
The setting Both mirrors adjusts the passenger-side outside mirror as well
Mirror adjust when the driver-side outside mirror is repositioned. This feature is not factory
enabled and must be activated in the Convenience sub-menu.
Factory
Resets certain features in the Convenience sub-menu to the factory settings.
setting
Back The display switches back to the Settings menu.
Lights and Vision sub-menu

Light & Vision

Function
menu
Coming home Set how long the headlights and inside lights stay on after locking or unlocking
the vehicle. Feature can also be switched on or off
Leaving home
Ambient light Adjust the brightness of the ambient lighting or switch the feature on or off.
Footwell light Set footwell lighting brightness when the doors are open.
Daytime
Switch daytime running lights (DRL) on and off.
running lights
Conv. turn Enable/disable lane change flash (convenience turn signal). When the feature
sig. is enabled, the turn signal flashes at least 3 times when the turn signal is
tapped
Factory set. Resets the functions in the Light & Vision sub-menu back to the factory
settings.
Back The display switches back to the Settings menu.

Driving checklists and warnings
Introduction
Getting ready and driving safely
Driving in other countries
Driving through water on roads
More information:
Sitting properly and safely
Transporting
Starting, shifting, parking
Saving fuel and helping the environment
Consumer information
WARNING
Driving under the influence of alcohol, illegal drugs, narcotics and some medications may
cause collisions and other accidents, severe personal injuries and even death.
Alcohol, illegal drugs, narcotics and some medications may severely affect perception,
reaction times and safe driving, which may result in the loss of vehicle control.
Getting ready and driving safely

Checklist
Observe the following points before and during every drive for your own safety, the safety of all pas-
sengers and others :
Check proper function of lights and turn signals.
Check tire pressure ( Tires and wheels) and fuel level ( Refueling).
Make sure that all windows are clean.
Store items and all luggage safely in the storage compartments and in the luggage compartment
and, if necessary, on the roof Transporting.
Always make sure that nothing keeps the pedals from moving freely.
Make sure that children are properly secured by a restraint system appropriate for their size and
weight Child safety and child restraints.
Properly adjust front seats, all head restraints and mirrors to the correct height Adjusting the
seating position.
Wear shoes that give your feet a good grip, and that give you a feel for the pedals.
Make sure that the floormat on the driver side is properly fastened and cannot interfere with the
pedals.
Assume a proper seating position before the vehicle starts to move and keep this position while
driving. Make sure that all passengers do the same Adjusting the seating position.
Properly fasten your safety belt before driving the vehicle and wear your safety belt properly at all
times while driving. Make sure that all passengers do the same Safety belts.
Only transport as many passengers as there are seats and safety belts available.
Never drive if your driving ability has been impaired, for example by medication, alcohol or illegal
drugs.
Never let passengers or phone calls distract you while driving and never take your attention off the
road while using vehicle software or adjusting vehicle equipment or accessories.
Always adapt your speed and driving style to visibility, weather, road, and traffic conditions.
Always obey traffic laws and speed limits.
On long trips make frequent rest stops at least once every 2 hours.
Secure animals in the vehicle with a system that corresponds to weight and size.
WARNING
Always observe posted speed limits and use common sense. Your good judgment can mean
the difference between arriving safely at your destination and being seriously injured in a
crash or other kind of accident.
Regular service and maintenance of your vehicle is important both for operational and driving
safety and to help prolong your vehicle's service life. Always follow the scheduled maintenance inter-
vals in the booklet Warranty and Maintenance, especially for changing the brake fluid. Hard use,
frequent stop-and-go driving, driving in very dusty areas, trailer towing, and other factors may make it
necessary to have the vehicle serviced more frequently. Ask an authorized Volkswagen dealer or an
authorized Volkswagen Service Facility for more information.
Driving in other countries

Checklist
Some countries have special safety standards and emissions requirements that your vehicle may not
meet. Before taking your vehicle to another country, Volkswagen therefore recommends that you ask
your authorized Volkswagen dealer or authorized Volkswagen Service Facility about the following
issues with regard to the country to which you would like to travel:
Should the vehicle be technically prepared for the trip abroad, such as masking or adjusting head-
lights?
Are maintenance, repair facilities, necessary tools and testing equipment as well as spare parts
readily available for your vehicle?
Are there authorized Volkswagen dealers and authorized Volkswagen Service Facilities in the
countries where you will be driving?
For gasoline engines: Is unleaded fuel with the right octane rating readily available?
Are engine oil ( Engine oil) and other operating fluids that meet Volkswagen quality and perfor-
mance requirements available where you will be driving? For more information, please see
Booklet Warranty and Maintenance.
Does the factory-installed navigation system work in the countries where you will be driving, and is
navigation data available?
Are special or heavy-duty tires necessary for the kind of driving expected?
NOTICE
Volkswagen is not responsible for mechanical damage that may result from substandard fuel
or service or the unavailability of Genuine Volkswagen parts.
Driving through water on roads

Note the following to help prevent vehicle damage when driving through water, for example on flooded
roads:
Check the depth of the water before driving through it. The water must not be any higher than
the bottom of the vehicle body , see dimensions
Do not drive faster than walking speed.
Never stop the vehicle, and do not drive in reverse or switch the engine off when driving through
water.
Oncoming vehicles may create waves that raise the water level and make it too deep for your
vehicle to drive through safely.
WARNING
After driving through water, mud, sludge, etc., the brakes react slower and need longer stop-
ping distances.
Always dry the brakes and clean off any ice coatings with a few careful applications of the
brake. Make sure not to endanger other motorists or cyclists or disobey legal requirements.
Avoid abrupt or sudden braking maneuvers immediately after driving through water.
NOTICE
Vehicle components such as the engine, transmission, suspension or electrical system may
be severely damaged by driving through water.
Never drive through salt water. Salt causes vehicle corrosion. Thoroughly rinse with fresh
water all vehicle parts that were exposed to salt water.
Technical data
Introduction
Important vehicle labels
Engine data
Dimensions
Your vehicle's engine type is shown on the vehicle identification label.

The specifications in this Manual refer to the base model. The stated values may vary, depending
upon different equipment or models, as well as with respect to special vehicles and vehicles exported
to different countries.
More information:
Transporting
Tires and wheels
Fuel
Engine oil
Engine coolant
WARNING
Disregarding or exceeding stated values for weights, loads, dimensions and maximum speed
may result in accidents and serious personal injuries.
Important vehicle labels
Fig. 18 Vehicle identification label: Shown in the example with engine identification code CBFA 3.
Fig. 19 Vehicle identification number (VIN).
Factory-installed safety certificates, stickers, and signs containing important information regarding
vehicle operation can be found in the engine compartment and on certain vehicle components, such
as inside the fuel filler flap, on the passenger sun visor, in the driver door jamb, or on the luggage
compartment floor.
Do not remove, alter, or render unusable or illegible any safety certificates, stickers, and labels.
If vehicle components bearing safety certificates, stickers, or labels are replaced, make certain that
the firm doing the work attaches new conforming certificates, stickers, or labels to the same part of the
new components.
Vehicle identification number

The vehicle identification number is on a plate on top of the instrument panel on the driver side, and is
visible from the outside through the windshield fig. 19 (arrow). The view window is on the side at the
bottom of the windshield. The vehicle identification number is also stamped into the top of the right drip
channel in the engine compartment. The drip channel is between the spring strut tower and the right
fender. Open the engine hood to read the vehicle identification number
Vehicle identification label

The vehicle identification label fig. 18 is affixed to the area of the spare wheel well underneath the
rear hatch floor panel and contains the following information:
(1) Vehicle identification number (VIN)
(2) Vehicle type, engine output, transmission
(3) Engine and transmission identification code, paint number, interior. In the example, the engine
classification code is CBFA.
(4) Optional equipment, part numbers
Safety Compliance Certification Label

A safety certificate affixed to the door jamb in the driver door confirms that at time of production all
necessary safety standards and requirements of the traffic safety agency of the respective country
were met. The month and year of production as well as the vehicle identification number may be listed
as well.
Radiator fan and high voltage warning sticker

A warning sticker about the radiator fan and the high voltage of the electrical system is located in the
engine compartment next to the engine hood release. The vehicle ignition system complies with the
Canadian standard ICES-002.
Tire inflation pressure label
A tire inflation pressure label is on the driver door jamb Tires and wheels.
Engine data
Gasoline engine
Maximum power Injection Engine Maximum torque (SAE net) No. of cylinders
output (SAE net) technology ID code Displacement
200 hp at 5100
207 ft-lbs at 1700 5000 4 cylinders
6000 rpm CCTA
TSI rpm 121.1 CID
147 kW at 5100 2.0L
280 Nm at 1700 5000 rpm (1984 ccm)
6000 rpm
Dimensions
Length 174.5 inches (4427 mm)
Width 71.2 inches (1809 mm)
Height (unloaded) 66.3 inches (1683 mm)
Wheelbase 102.5 inches (2605 mm)
Minimum turning circle diameter (wall to wall) 2 39 feet (12 m)
Track2 front 61.8 inches (1570 mm)
Track2 rear 61.9 inches (1571 mm)
Ground clearance 6.9 inches (175 mm) 3
Approach angle
28 degrees
Off-road
Departure angle 25 degrees
2
Slight differences to these figures are possible, depending on wheel and tire size fitted and the level
selected.
3
Approx. figure for fully loaded standard vehicle; varies depending on your vehicle's equipment (engine,
tires, wheels, tire inflation pressure, driving situation and other factors).
Ramp angle 21.3 degrees
Max. gradient 31 degrees
Fording depth 6.9 inches (175 mm)
NOTICE
Please be careful when parking your vehicle in areas with parking barriers or curbs. These
vary in height and could damage your bumper and related parts if the front of your vehicle hits
a barrier or curb that is too high while your are getting into or out of a parking spot.
Always be careful when you enter a driveway or drive up or down steep ramps or over
curbs or other obstacles. Parts of the vehicle close to the ground may be damaged (such as
bumper covers, spoilers, and parts of the engine, suspension, and exhaust systems).
Vehicle key set
Introduction
Remote control vehicle keys
Mechanical key
Indicator light in the remote control vehicle key
Replacing the remote control vehicle key battery
Synchronizing the remote control vehicle key
More information:
Power locking and closing system
Starting and stopping the engine
Emergency closing and opening
DANGER
20 mm button cells and other lithium batteries will cause serious personal injury and even
death within a short time if swallowed.
Always keep remote control vehicle key fobs with batteries, spare batteries, as well as
dead button cell and larger 20 mm batteries out of the reach of children.
Get medical attention immediately if you suspect that a battery has been swallowed.
WARNING
Improper use of vehicle keys can result in serious personal injury.
Always take the key with you when you leave the vehicle. It can be used to start the engine
and operate vehicle systems such as the power windows, leading to serious personal injury.
Children or other unauthorized persons could also lock the doors and the luggage compart-
ment.
Never leave children, disabled persons, or anyone who cannot help themselves in the
vehicle. The doors can be locked with the remote control vehicle key. This could result in
people being trapped in the vehicle in an emergency. For example, depending on the time of
year, people trapped in the vehicle can be exposed to very high or very low temperatures.
Heat buildup in the passenger and luggage compartment of a parked vehicle can result in
temperatures in the vehicle that are much higher than the outside temperatures, particularly
in summer. Temperatures can quickly reach levels that can cause unconsciousness and
death, particularly to small children.
Never remove the key from the ignition switch while the vehicle is moving or rolling to a
stop. The steering wheel will lock and you will not be able to steer or control the vehicle.
Remote control vehicle keys
Fig. 20 Remote control vehicle key with panic button.
Remote control vehicle key

The remote control vehicle key can unlock and lock the vehicle from a distance Power locking and
closing system.
The remote transmitter and battery are inside the remote control vehicle key. The receiver is inside the
passenger compartment. The operating range of the remote control vehicle key for a fresh battery is
several yards (meters) around the vehicle.
If the remote control vehicle key will not lock or unlock your vehicle, you probably need to replace the
battery in the remote control vehicle key Replacing the remote control vehicle key battery, If this is
not the problem, the key should be resynchronized by an authorized Volkswagen dealer, an author-
ized Volkswagen Service Facility, or another qualified workshop. See also Synchronizing the re-
mote control vehicle key.
Folding the key bit in or out

Pressing button fig. 20 (1) releases the key bit and folds it out.
To fold the key bit in press button (1) while pressing the key bit back until it clicks.
Panic button
Press the panic button (2) only in emergencies! After pushing the panic button, the horn will sound and
the turn signals will flash. Press the panic button again to switch off the panic feature.
Replacement vehicle keys

The vehicle identification number is required to get a replacement key or an additional remote control
vehicle key.
Up to 8 vehicle keys, each of which must be properly cut, coded, programmed, and synchronized, can
be used with your vehicle.
Each new vehicle key contains a microchip and must be coded with the data from the vehicle's elec-
tronic immobilizer. A vehicle key will not work if it does not contain a microchip or contains a chip that
is not coded, even if the key bit was cut correctly.
You can obtain additional or duplicate remote control vehicle keys from authorized Volkswagen deal-
ers, authorized Volkswagen Service Facilities and from certain independent repair facilities and lock-
smiths which are qualified to make remote control vehicle keys.
Each vehicle key must be programmed by an authorized Volkswagen dealer, an authorized
Volkswagen Service Facility in order for it to work with your vehicle.
To find the nearest qualified independent repair facility, locksmith or Volkswagen dealer which can cut
and code replacement vehicle keys call the VW Customer Care Hotline at 1-800-822-8987 or visit
http://www.vw.com and search for replacement keys.
Canadian customers can contact an authorized Volkswagen dealer or Volkswagen Service Facility or
call the Volkswagen Canada Customer CARE Center at 1-800-822-8987.
NOTICE
The remote control vehicle keys contain electrical components. Protect them from damage,
moisture and rough handling.
Do not press the buttons on the remote control vehicle key unless you actually want to use the
function in question. Since terrain and conditions vary, pressing a button on the remote control vehicle
key when it is not necessary may unlock the vehicle or set off the panic alarm, even if you think you
are out of range.
Remote control vehicle key functions can be temporarily disrupted by interference from transmit-
ters near the vehicle that use the same frequency range (such as radio equipment or cellular phones).
Things between the remote control vehicle key and vehicle, bad weather, as well as a weak
battery can reduce the operating range.
If the remote control vehicle key buttons or the power locking buttons Vehicle key set are
pushed repeatedly in quick succession, the power locking system is switched off for a brief period to
help keep it from being overloaded. The vehicle is then unlocked for about 30 seconds. Unless a door
or the rear hatch is opened in this span of time, the vehicle is automatically locked afterwards.
Mechanical key
Fig. 21 Mechanical key.
The remote control vehicle key set includes a mechanical key fig. 21.
Use the mechanical key for:
Manually locking and unlocking the vehicle
Starting engine
Indicator light in the remote control vehicle key
Fig. 22 Indicator light in the remote control vehicle key.
If a button in the remote control vehicle key is pressed briefly, the indicator light (arrow) fig. 22 will
flash once briefly. If you push and hold a button, it flashes repeatedly.
If the indicator light in the remote control vehicle key does not come on when the button is pressed,
the battery inside the key must be replaced Replacing the remote control vehicle key battery. A
Declaration of Compliance with United States FCC and Industry Canada regulations is found in the
Consumer Information section of this Manual Declaration of Compliance, Telecommunications and
Electronic Systems.
Replacing the remote control vehicle key battery
Fig. 23 Remote control vehicle key: Open battery compartment cover.

Fig. 24 Remote control vehicle key: Remove old battery.
Volkswagen recommends having the battery in the remote control vehicle key changed by an author-
ized Volkswagen dealer or an authorized Volkswagen Service Facility.
The battery is on the back of the remote control vehicle key under a cover fig. 23. When changing
the battery, pay attention to the correct polarity and use the same type of battery .
Replacing the battery

Unfold the key bit on the remote control vehicle key Folding the key bit in or out.
Remove the cover on the back of the remote control vehicle key in the direction of the arrow
fig. 24.
Use a thin object to pry the battery out of the battery compartment .
Position the new battery in as shown and press it into the battery compartment (opposite to direc-
tion of the arrow) .
Position the cover as shown fig. 23 and press it down (opposite to direction of the arrow) until
you hear it click into place.
NOTICE
Changing the battery improperly can damage the remote control vehicle key.
Using the wrong battery can damage the remote control vehicle key. Replace a dead battery
with a new one that has the same voltage, size, and specifications.
Make sure the plus and minus poles of the battery are correctly positioned.
Dispose of old batteries in an environmentally responsible manner and keep them out of the
reach of children.
Batteries of the type used in your remote control vehicle key may contain Perchlorate Material.
Special handling may apply see http://www.dtsc.ca.gov/hazardouswaste/perchlorate. Obey all legal
requirements regarding handling and disposal of these batteries. Authorized Volkswagen dealers and
authorized Volkswagen service facilities are familiar with the requirements, and we recommend that
you have them perform this service for you.
Synchronizing the remote control vehicle key

If the button is pressed often while outside the operating range, it is possible that the vehicle cannot
be locked or unlocked anymore with the remote control vehicle key. Synchronize the vehicle key as
follows:
Unfold the key bit on the remote control vehicle key Remote control vehicle keys.
Remove the cap from the door handle on the driver door Emergency closing and opening.
Press the button on the remote control vehicle key. Stand immediately next to vehicle while
doing so.
Manually unlock the vehicle using the key bit within one minute.
Switch the ignition on with the vehicle key. The synchronization is complete.
Reinstall the cap.
Introduction
Indicator light in the driver door
Description of the power locking system
Unlocking or locking the vehicle from the outside
Unlocking or locking the vehicle from the inside
Unlocking or locking the vehicle with Keyless Access
Anti-theft alarm system
The power locking system works properly only when all doors and the rear hatch are completely
closed. When the driver door is open, the vehicle cannot be locked with the remote control vehicle key.
For vehicles equipped with the Keyless Access locking and starting system, the vehicle can be locked
only if the ignition is switched off and the driver door is closed.
Leaving the vehicle unlocked for longer periods of non-use (for example, in your garage) can cause
the vehicle battery to drain so that the engine can no longer be started.
More information:
Exterior views
Vehicle key set
Doors
Rear hatch
Power windows
Power sunroof
Trailer towing
WARNING
Improper use of power locks can result in serious personal injury.
The power locking button locks all doors. Locking the doors from the inside can help
prevent unintended door opening during a collision and can also prevent unwanted entry
from the outside. Locked doors can, however, delay assistance to vehicle occupants and
rescue from the outside in an accident or other emergency.
Never leave children or anyone who cannot help themselves behind in the vehicle. All
doors can be locked from the inside with the power lock button. This could leave people
trapped in the vehicle in an emergency. Depending on the time of year, people trapped in the
vehicle can be exposed to very high or very low temperatures.
A closed vehicle can become very hot or very cold, depending on the season. Particularly
in the summer, heat buildup in the passenger and luggage compartment of a parked vehicle
can result in temperatures in the vehicle that are much higher than the outside temperatures.
Temperatures can quickly reach levels that can cause unconsciousness and death, particu-
larly to small children.
Never allow passengers to remain in a locked vehicle. In an emergency any person still
inside the vehicle might not be able to get out.
Indicator light in the driver door

The indicator light for the power locking system is in the driver door Passenger compartment.
After the vehicle is locked Meaning
The red LED light flashes for about 2 seconds in short The vehicle is locked.
intervals, then slower.
Red LED light flashes for about 2 seconds in short Locking system malfunction. See an
intervals, then lights up continuously for about authorized Volkswagen dealer or an
30 seconds. authorized Volkswagen Service Facility.
NOTICE
Description of the power locking system

The power locking system lets you unlock and lock all doors, the rear hatch, and the fuel filler flap:
From the outside with the remote control vehicle key.
From the outside with Keyless Access Unlocking or locking the vehicle from the outside.
From the inside with the power locking button Unlocking or locking the vehicle from the inside.
Special functions of the power locking system can be activated or deactivated via the Convenience
sub-menu in the Settings menu on vehicles with the Premium instrument cluster Volkswagen
Information System or by an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
The doors and the rear hatch can be locked manually if the remote control vehicle key or the power
locking system is not working.
Automatic locking (Auto lock)

The vehicle will lock automatically when it reaches a speed of about 10 mph (15 km/h). When the
vehicle is locked, the indicator light comes on in the power locking button fig. 26.
Automatic unlocking (Auto unlock)

All doors automatically unlock when you switch off the ignition and open a door from inside the vehicle.
On vehicles with automatic transmission, the doors will also unlock when the selector lever is in Park
(P) and the ignition is switched off. Auto unlock works only if the vehicle has been automatically locked
with the Auto lock feature. The indicator light goes out in the power locking button when the doors
unlock fig. 26.
Locking the vehicle after airbag inflation

If the airbags are activated during a collision, the entire vehicle is unlocked. Depending on the severity
of the damage, the vehicle can be locked after a collision when the airbags have deployed as follows:
Function Action
Locking the vehicle with the Switch the ignition off.

power locking button: Open a door once.
Press the power locking button .
Locking the vehicle with the Switch the ignition off and on again
remote control vehicle key: OR: Remove the remote control vehicle from the ignition.
Open a door once.
Lock the vehicle with the remote control vehicle key.
If the remote control vehicle key buttons Vehicle key set or one of the power locking buttons
47 are pushed repeatedly in quick succession, the power locking system is switched off for a brief
period to help keep it from being overloaded. The vehicle is then unlocked for about 30 seconds.
Unless a door or the rear hatch is opened during this time, the vehicle is automatically locked after-
wards.
Unlocking or locking the vehicle from the outside
Fig. 25 Remote control vehicle key with panic button.
Function Using the buttons on the remote control vehicle

key buttons fig. 25
Unlock the vehicle. Press the button. Keep pressed to unlock all doors
and the rear hatch.
Lock the vehicle. Press the button.
Unlock the rear hatch. Press the button.
Note: Depending on the settings for the power locking system in the Convenience sub-menu on
vehicles with the Premium instrument cluster, it may be necessary to press the button on the re-
mote control vehicle key twice to unlock all doors and the rear hatch Volkswagen Information Sys-
tem.
The vehicle key unlocks or locks the vehicle only when the battery in the remote control key has
enough power, and the remote control vehicle key is within a few yards/meters of the vehicle.
All turn signals flash once and the horn beeps once to confirm that the vehicle has been locked.
The horn beep can be disabled by deactivating the ATA confirmation feature in the Convenience
submenu Convenience sub-menu.
All turn signals flash twice to confirm that the vehicle has been unlocked.
If the turn signals do not flash to confirm locking, one or more doors, the rear hatch or the engine hood
is not locked.
If the driver door is open, the vehicle cannot be locked with the remote control vehicle key.
If the vehicle was unlocked with the remote control vehicle key and the door or the rear hatch has not
been opened in about 30 seconds, the vehicle is automatically locked again. This feature helps pre-
vent you from leaving the vehicle unlocked unintentionally.
Unlocking or locking the vehicle from the inside
Fig. 26 On all 4 doors: Power locking button.
Press button fig. 26:
Unlock the vehicle.
Lock the vehicle.
The power locking button works whether the ignition is switched on or off but only when all doors are
closed.
If the vehicle is locked with the remote control vehicle key, the power locking switch is deactivated.
If the vehicle is locked with the power locking button:
The yellow indicator light in the power locking button comes on to indicate that all doors and the
rear hatch are locked.
Opening doors or the rear hatch from the outside is not possible, at a traffic light, for example.
Doors can be unlocked and opened separately from inside the vehicle by pulling the door handle to
open the door. The indicator light goes out. The unopened doors and rear hatch remain locked and
cannot be opened from the outside.
An open driver door will not be locked. This helps keep the driver from being locked out of the
vehicle.
The vehicle is unlocked if you push the button while the vehicle is standing still. Depending on the
settings in the Convenience submenu Convenience sub-menu, it may also be unlocked when you
switch off the ignition and open a door from inside the vehicle (Auto unlock). On vehicles with
automatic transmission, it may also be unlocked when the selector lever is in Park (P) and the ignition
is switched off.
Unlocking or locking the vehicle with Keyless Access
Fig. 27 Ranges of the Keyless Access locking and starting system.
Fig. 28 Keyless Access locking and starting system: Sensor 1 for unlocking on the inside of the front door
handles. Sensor for locking 2 on the outside of the door handles.
Keyless Access is a keyless starting and locking system that unlocks and locks the vehicle without
active use of a remote control vehicle key. All you have to do is touch a sensor surface on one of the
front door handles fig. 27 or push the button on the rear hatch Opening the rear hatch when a
valid vehicle key is within range .
General information
When a valid vehicle key comes within range , the Keyless Access locking and starting system recog-
nizes a valid vehicle entry request as soon as a door handle sensor is touched on the driver or front
passenger door or the button on the rear hatch is pressed. The following functions are then enabled
without active use of the vehicle key:
Keyless Entry: Unlocking the vehicle with the sensor surfaces on the door handles of the driver or
front passenger door fig. 28 (1) or by using the button on the rear hatch.
Keyless Go: Start the engine and drive. just have to press the starter button and a valid remote
control vehicle key must be inside the vehicle.
Keyless Exit: Locking the vehicle via the door handle of the driver or front passenger door (2).
The power locks and the closing system work like the standard unlocking and locking system. Only the
way that the systems are operated is different.
All turn signals flash twice to confirm that the vehicle has been unlocked and once to confirm that it
has been locked.
If the vehicle was unlocked and within the next few seconds no door or the rear hatch has been
opened, the vehicle is automatically locked again.
Unlocking and opening doors (Keyless Entry)

Grasp the door handle of the driver or front passenger door so that you touch the unlocking sensor
surface (1).
Open the door.
Closing and locking doors (Keyless Exit)

Close the driver door.
Touch the sensor surface in the door handle on the driver or front passenger door (2) once. The
vehicle is locked. The door being locked must be closed.
Unlocking and locking the rear hatch

If the vehicle is locked and if a valid vehicle key is within range fig. 27 of the rear hatch, it unlocks
automatically when opened.
Open and close the rear hatch as you would a standard rear hatch
The rear hatch locks automatically when it is closed except in the following situations:
The vehicle is completely unlocked.
When an authorized vehicle key is inside the vehicle.
Locking with a second vehicle key

If a remote control vehicle key is inside the passenger compartment, the vehicle can be locked from
the outside only if a second valid vehicle key is within range.
When the vehicle is locked from the outside, the keyless go (starting) function of any keys left in the
passenger compartment will be deactivated. All other functions (remote central locking and unlocking
as well as emergency starting) remain active and unchanged.
A key that was inside the vehicle when it was locked from the outside is reactivated:
by pressing a button on the deactivated key.
by pressing a door handle sensor when the deactivated key is outside of the vehicle, but within
range.
by starting the engine with the starter button on the center console.
Automatic deactivation of sensors

If the vehicle has not been unlocked or locked for a longer period of time, the proximity sensors in the
passenger door are automatically deactivated.
If a sensor on the door handle of a locked vehicle is activated too often, for instance by a bush or
hedge that rubs against the vehicle, the sensors in the door handle on that side of the vehicle are
switched off for about 30 minutes.
The door handle sensors become active again if one of the following events occurs:
30 minutes have passed.
OR: The vehicle is unlocked using the button in the remote control vehicle key.
OR: The rear hatch is opened.
OR: The vehicle is mechanically unlocked with the vehicle key.
Convenience features
To use the convenience closing feature to close all power windows, hold your finger on the lock sensor
surface fig. 28 (2) on the outside of the door handle for a few seconds until the windows close.
Remove your finger from the lock sensor surface (2) to stop the function. If you touch the unlock
sensor surface 1 on the inside of the door handle immediately after releasing the lock sensor surface 1
(arrow), all of the windows will open (safety function). Pinch protection is active during convenience
closing of the windows.
The settings in the Settings Convenience menu 19 determine which doors open when the
door handle sensor surface is touched.
NOTICE
The door handle sensor surfaces can be activated by a strong stream of water or steam if a
valid vehicle key is within range of the vehicle.
All windows may open if you turn the spray of water or steam away from and then back onto
the door handle sensor surface in quick succession. If at least one power window is opened
and the sensor is continuously activated, convenience closing is started.
The door may not open if the outside and inside door handles are used at the same time.
If the automatic transmission is not in Park (P) position, the electronic steering column lock will
not lock and the vehicle will not lock via sensors in the front door handles or the remote control vehicle
key.
If the vehicle battery or the battery in the remote control vehicle key is weak or dead, it might not
be possible to unlock and lock the vehicle using Keyless Access. The vehicle can still be manually
locked or unlocked with the key bit
The driver message Key not in range appears in the instrument cluster display if there is no
remote control vehicle key inside the vehicle or if the system does not recognize the vehicle key. The
key may not be recognized, for example, if it is covered by something that interferes with the signal
(such as a briefcase), or if the remote control vehicle key battery is weak. Electronic devices such as
mobile phones can also interfere with the signal.
Dirt on the door handles that contains a lot of salt (especially in winter) can affect the way the
door handle sensors work. Cleaning the door handles can help with this problem

Your vehicle is either equipped with an anti-theft alarm system or pre-equipped for anti-theft alarm
system installation. If the vehicle is pre-equipped for installation of the anti-theft alarm system, the
alarm system can be retrofitted by an authorized Volkswagen dealer or an authorized Volkswagen
Service Facility.
The anti-theft alarm system makes it more difficult for someone to break into or steal the vehicle.
The anti-theft alarm system is automatically activated when the vehicle is locked by pressing the lock
button on the remote control vehicle key.
When is the alarm triggered?

The anti-theft alarm system sounds for about 30 seconds and the turn signals flash for up to 5 minutes
if the following occurs with respect to the locked vehicle:
Opening a door that has been mechanically unlocked.
Forcibly opening a door.
Forcibly opening the engine hood.
Forcibly opening the rear hatch.
Switching on the ignition with an invalid key.
Disconnecting the vehicle battery.
Disconnecting an anti-theft system integrated trailer.
Deactivating the alarm

Unlock the vehicle with the unlock button on the remote control vehicle key and switch on the ignition
with a valid remote control vehicle key.
For vehicles with Keyless Access, the alarm can be deactivated by grasping one of the door handles
when a valid vehicle key is in range or by holding the remote control vehicle key to the right of the
steering column trim and pressing the starter button Unlocking or locking the vehicle with Keyless
Access.
After the alarm has stopped and the vehicle is opened again in the same or a different area that
is protected by the alarm, the alarm is triggered again. For example, the alarm will sound again if the
rear hatch is opened after one of the doors has been opened.
The anti-theft alarm system is not activated when the vehicle is locked with the power lock
switch on the inside of the driver or front passenger doors.
If the driver door is mechanically unlocked using the vehicle key bit, only the driver door is
unlocked, but not the entire vehicle. Switching on the ignition deactivates the anti-theft alarm system
and activates the central locking button. To unlock the doors, use the central locking button or remote
control vehicle key.
If the vehicle battery is dead or weak, the anti-theft alarm system will not work properly.
Doors
Introduction
Warning light
Child safety lock
More information:
Exterior views
Vehicle key set
Power windows
WARNING
A door that is not closed properly may open suddenly when the vehicle is moving and cause
severe injuries.
Stop immediately and close the door.
Make sure that the door is safely and completely latched when closed. The closed door
must be flush with the surrounding auto body parts.
Open or close doors only if no one is in the way.
WARNING
A door kept open with the door stop may close in strong winds or on inclines and cause
injuries.
Always hold doors by the door handle while opening and closing.
Warning light
Lights
Possible cause Proper response
up
At least one vehicle door is open or Stop!

improperly closed. Open and close the door again.
When the ignition is switched on, several warning and indicator lights come on briefly for a function
check. They go out after a few seconds.
If a door is not closed properly, the red warning light comes on in the instrument cluster display
showing an open door.
Depending on your vehicle's equipment and options, a symbol may be displayed in the instrument
cluster instead of the warning light. The symbol will still be displayed even after the ignition is switched
off. The Premium instrument cluster display goes out about 15 seconds after the vehicle has been
locked.
Child safety lock
Fig. 29 In the left rear door: Child safety lock A deactivated, B activated.
Fig. 30 In the right rear door: Child safety lock A deactivated, B activated.
The child safety lock keeps the rear doors from being opened from the inside, so that children cannot
open them accidentally. When the child safety lock is engaged, the rear doors can only be opened
from the outside.
Engaging or disengaging child safety lock

Unlock the vehicle and open the respective rear door.
Unfold the key bit from the remote control vehicle key.
Using the key bit, move the slot into the desired position.
Slot position fig. 29 or fig. 30:
(A) Child safety lock disengaged.
(B) Child safety lock engaged.
WARNING
When the child safety lock is engaged, that rear door cannot be opened from the inside.
Never leave children, disabled persons, or anyone who cannot help themselves, in the
vehicle when locking the doors. This could result in people being locked in the vehicle. This
could result in people being trapped in the vehicle in an emergency. Depending on the time of
Temperatures can quickly reach levels that can cause unconsciousness and death,
particularly to small children.
Rear hatch
Introduction
Warning light
Opening the rear hatch
Closing the rear hatch
More information:
Exterior views
Power locking system
Transporting
WARNING
Accidents and severe personal injuries can result if you unlock, open, or close the rear hatch
when someone is in the way.
Only open or close the rear hatch if no one is in the way.
After closing the rear hatch, always make sure that it is properly closed and locked so that
it cannot open suddenly when the vehicle is moving. The closed rear hatch must be flush
with the surrounding auto body parts.
Always keep the rear hatch closed while driving to help keep poisonous exhaust gas from
being drawn into the vehicle.
Never open the rear hatch when a luggage rack is installed and loaded. If, for example,
there are bicycles on a carrier on the rear hatch, it is possible that the hatch may be difficult
to open. An open rear hatch may fall on its own because of the additional weight. The open
rear hatch must be supported or the weight must be removed from the luggage rack first.
Close and lock the rear hatch and all doors when the vehicle is not in use. First, make sure
that no one is left inside the vehicle.
Never leave your vehicle unattended or let children play around your vehicle, especially
when the rear hatch is open. A child could crawl into the vehicle and pull the rear hatch shut,
becoming trapped and unable to get out. A closed vehicle can become very hot or very cold,
depending on the season. Particularly in the summer, heat buildup in the passenger and
luggage compartment of a parked vehicle can result in temperatures in the vehicle that are
much higher than the outside temperatures. Temperatures can quickly reach levels that can
cause unconsciousness and death, particularly to small children.
Never leave children or anyone who cannot help themselves behind in the vehicle. They
may lock the vehicle with the vehicle key or the power locking button and lock themselves in.
NOTICE
Before opening or closing the rear hatch, make sure there is enough room to do so, as for
example when the vehicle has a trailer or is in a garage.
NOTICE
Never use the gas strut to hold or clamp a load in place. This can damage the rear hatch and
make it impossible to close.
Warning light
Lights up Possible cause Proper response
OR
Stop!
Rear hatch open or improperly closed.
Open the rear hatch and then close it again.
icon
appears in
the display
If the rear hatch is not closed properly, the red warning light comes on in the instrument cluster or
the vehicle icon appears in the instrument cluster display showing an open rear hatch.
Depending on your vehicle's equipment and options, the red warning light or icon may still be
displayed even after the ignition is switched off as long as the key has not been taken out of the
ignition. The icon in the instrument cluster display goes out about 15 seconds after the vehicle has
been locked.
WARNING
If the rear hatch is not closed properly, it may open suddenly when the vehicle is moving and
cause severe injuries.
Stop immediately and close the rear hatch.
Always make sure the rear hatch is securely latched after you close it.
Opening the rear hatch
Fig. 31 In the remote control vehicle key: Button to unlock and open the rear hatch.
Fig. 32 Opening rear hatch from the outside.
Always remove any item(s) being transported on the rear hatch before opening it .
Unlocking with the remote control vehicle key

Briefly press the or button on the remote control vehicle key fig. 31 to unlock the rear hatch.
Opening with the button on the rear hatch

Unlock the vehicle or the rear hatch, or open a door.
Lift the rear hatch slightly at the button fig. 32 (arrow).
WARNING
Improper or unsupervised unlocking or opening of the rear hatch can cause severe injuries.
Never open the hatch when someone is in the way.
If a bicycle or luggage rack is installed on the rear hatch, it may be hard to see that the
rear hatch is unlatched. An unlatched rear hatch may open suddenly when the vehicle is
moving.
NOTICE
Before opening or closing the rear hatch, make sure there is enough room to do so, as for
example when the vehicle has a trailer or is in a garage.
At temperatures below +32 F (0 C), the rear hatch may not open automatically after you unlock
it. It will be necessary to lift it by hand.
Fig. 33 Opened rear hatch: Recessed grips for closing.

Grasp one of the recessed grips in the trim of the rear hatch fig. 33 (arrows).
Pull the rear hatch down and close it securely so that the latch engages.
Check the rear hatch to make sure it is securely latched.
Locking the rear hatch

If you unlock the vehicle with the vehicle key, but do not open either a door or the rear hatch in about
the next 30 seconds, the vehicle is automatically locked again. This feature helps prevent you from
leaving the vehicle unlocked unintentionally.
It is only possible to lock the rear hatch when it is securely closed and latched.
The power locking system also locks the rear hatch.
If the rear hatch of a locked vehicle is unlocked with the button on the remote control vehicle
key, it will lock again right after it is closed.
A closed but unlocked rear hatch automatically locks at speeds about 5 mph (10 km/h).
WARNING
Improper or unsupervised closing of the rear hatch can cause severe injuries. Never close
the hatch when someone is in the way.
Never leave your vehicle unattended or let children play around your vehicle, especially
with the rear hatch left open. A child could crawl into the vehicle and pull the rear hatch shut,
becoming trapped and unable to get out. A closed vehicle can become very hot or very cold
depending on the season. Temperatures can quickly levels that can cause unconsciousness
or death, particularly to small children.
Make sure that the remote control vehicle key is not in the luggage compartment before closing
the rear hatch.
Power windows
Introduction
Opening and closing power windows
Power windows features
Power window pinch protection
More information:
WARNING
Improper use of power windows can result in serious personal injury.
Never let anyone get in the way of a power window when closing it.
When locking the vehicle from the outside, make sure that no one, especially children,
remains in the vehicle. The windows will not open in case of an emergency.
Always take the key with you when you leave the vehicle. You can still use the power
windows for several minutes after the ignition is switched off as long as the driver or front
passenger door has not been opened.
Always use the safety switch when children are in the back seat to disable the rear power
windows and keep them from being opened and closed.
NOTICE
If you leave the windows open, rain or other precipitation may enter the vehicle from outside
and can damage the vehicle interior.
Opening and closing power windows
Fig. 34 In the driver door: Switches for front and rear power windows.
Switches in the driver door
Key to fig. 34:
(1) For the windows in the front doors.
(2) For the windows in the rear doors.
(3) Safety switch.
Opening or closing windows
Function Action
Opening: Press the switch.
Closing: Pull the switch.
Stopping automatic Press or pull the switch again.

window movement:
The safety switch (3) deactivates the power windows

in the rear doors. The yellow indicator light in the
switch comes on.
The power windows operate only when the ignition is switched on.
You can still use the power windows for several minutes after the ignition is switched off as long as the
driver or front passenger door has not been opened. When the vehicle key has been removed from
the ignition and the driver door has been opened, the power windows cannot be opened or closed.
A separate button for controlling the window is located in the front passenger door.
Power windows features

One-touch opening and closing

The one-touch feature automatically opens/closes a power window all the way. The window switch
does not have to be held down/up.
For one-touch closing: Pull the switch for the window up briefly as far as it goes.
For one-touch opening: Press the switch for the window down briefly as far as it goes.
Stopping automatic movement: Pull/press the switch again.
Reactivating the one-touch feature

If the vehicle battery is disconnected or dead and the windows are not completely closed, the one-
touch feature will not work and must be reactivated:
Close all windows and doors.
Pull up the switch for the respective window and hold it for at least 2 seconds in this position.
Release the switch, pull up and hold again. The one-touch feature is now reactivated.
The one-touch feature can be reactivated for one or more windows at the same time.
Convenience closing
The convenience closing feature lets you close the windows and the power sunroof as follows:
From inside the vehicle, pull up and hold the switch for the driver window until all windows and the
sunroof are closed Power locking and closing system.
From outside the vehicle (vehicles with Keyless Access), hold your finger on the lock sensor surface
on the outside of the door handle for a few seconds until the windows close 46.
Convenience closing first closes the windows and then the power sunroof.
WARNING
Improper use of power windows can result in serious personal injury.
Never let anyone get in the way of a power window when closing it.
When locking the vehicle from the outside, make sure that no one, especially children,
remains in the vehicle. The windows will not open in case of an emergency.
Always take the key with you when you leave the vehicle. You can still use the power
windows for several minutes after the ignition is switched off as long as the driver or front
passenger door has not been opened.
Always use the safety switch when children are in the back seat to disable the rear power
windows and keep them from being opened and closed.
If the power windows malfunction, the one-touch feature, as well as pinch protection, will not work
properly. See an authorized Volkswagen dealer or authorized Volkswagen Service Facility right away.
Power window pinch protection

Pinch protection can help reduce the risk of pinching injuries when closing a power window . If
one-touch window closing meets resistance or there is something in the way, the window will stop and
go down again.
Check why the window did not close.
Try one-touch window closing again.
If the window meets resistance a second time, so that it stops and goes back down, one-touch
closing is deactivated for about 10 seconds.
If you pull the power window button up all the way and hold it during this 10 second interval, the
window will close without pinch protection .
Closing the window without pinch protection

Try to close the window again within 10 seconds by holding the switch. Pinch protection is
turned off for a short distance in the window track!
If closing takes longer than about 10 seconds, pinch protection is turned on again. The window
stops again if there is resistance.
If the window still will not close, please see an authorized Volkswagen dealer or an authorized
Volkswagen Service Facility.
WARNING
Without pinch protection, power windows will close with enough force to cause serious
personal injury.
Always be careful when closing power windows.
Always make sure that no one is in the way when overriding pinch protection to close
power windows!
Pinch protection cannot prevent fingers or other parts of the body from being pressed
against the window frame; injuries may result.
Pinch protection is also active during convenience closing of the windows and the power sunroof
Convenience closing.
Power sunroof
Introduction
Opening or closing the power sunroof
Opening or closing the power sunshade
Power sunroof convenience closing feature
Pinch protection for the power sunroof and the power sunshade
Initializing the power sunroof
More information:
Roof rack
WARNING
Improper use of the power sunroof can result in serious personal injury.
Always make sure that no one is in the way of the power sunroof when it is closing.
Always take the key with you when you leave the vehicle.
Never leave children or disabled persons in the vehicle particularly if they have access
to the vehicle key. Unsupervised use of the remote control vehicle key makes it possible to
lock the vehicle, start the engine, turn on the ignition and operate the sunroof.
You can still open or close the power sunroof for several minutes after you switch off the
ignition, as long as the driver or front passenger door has not been opened.
NOTICE
To help prevent damage, remove ice and snow from the sunroof before opening it in winter
weather.
Always close the sunroof before leaving the vehicle or if it begins raining. If the sunroof is
open, rain could enter the vehicle interior and cause extensive damage to the electrical system.
This could result in further vehicle damage.
Remove leaves and other objects from the sunroof guide rails regularly either by hand or using a
vacuum cleaner.
If the power sunroof malfunctions, pinch protection does not function properly. See an authorized
Volkswagen dealer or an authorized Volkswagen Service Facility.
Fig. 35 In the headliner: Rotary switch for the power sunroof. A: Turn the rotary switch to slide the sunroof
open or closed. B: Press or pull the switch to tilt open or to close.
The rotary switch must turned to its home position (3) in order to tilt the power sunroof.
Function Switch position Action
fig. 35 A
(3) Turn the switch past position (2) and hold it

To open sliding sunroof
there until the glass roof moves to the
fully:
desired position.
To move the sliding (2) Turn the switch to the desired position.
sunroof to comfort
position:
To set an intermediate (2) to (1)

position:
To close the sliding (1)

sunroof fully:
To tilt open the tilting roof (4) Push the rear part of the switch briefly.
fully:
To stop the one-touch (4) or (5) Push or pull switch again briefly.
feature:
To set an intermediate Pull or push the rear part of the switch briefly
(4) to (5)
position: until the desired position is reached.
To close fully: (5) Pull the rear part of the switch briefly.
The power sunroof only works when the ignition is on. You can still open or close the power sunroof
for several minutes after you switch off the ignition, as long as the driver or front passenger door has
not been opened.
All procedures are interrupted as soon as the rotary switch is operated.
The sunshade opens automatically when the power sunroof opens if the shade was previously
completely closed or in front of the glass roof. The sunshade remains in the previous position and
does not close automatically with the sunroof. The sunshade cannot be closed completely until the
power sunroof is closed.
If your power sunroof will not close properly, do not try to close it yourself, doing so can cause serious
and expensive damage that will not be covered by any Volkswagen Limited Warranty. Special
knowledge and tools are required to close the power sunroof if it will not close on its own. To help
prevent damage to the sunroof, have an authorized Volkswagen dealer or an authorized Volkswagen
Service Facility help you close and repair the power sunroof.
The comfort position (2) provides sufficient ventilation without loud wind noise.
Fig. 37 In the headliner: Buttons for sunshade.
Function Response
To open fully (one-touch

feature): Briefly press the fig. 37 (1) button.
To stop the one-touch

Briefly press the (1) button or the (2) button.
feature:
To set an intermediate Keep the (1) button or (2) button pressed until the position has been
position: reached.
To close fully (one-touch

Briefly press the (2) button.
feature):
You can still use the sunshade for several minutes after the ignition is switched off as long as the
driver or passenger door has not been opened.
When the power sunroof is completely open the sunshade is automatically moved to a ventilation
position.
When the power sunroof is in the tilt position the sunshade will also open a small gap.
When the power sunroof is open, the power sunshade can only be closed up to the front edge of
the glass roof.
Power sunroof convenience closing feature

Convenience closing
The convenience closing feature lets you close the power sunroof as follows:
Turn the vehicle key bit in the lock of the driver door to the closing position and hold it there
Power locking and closing system. The power sunroof is closed. Release the vehicle key in order to
stop the process.
Vehicles with Keyless Access: hold your finger on the lock sensor surface on the outside of the
door handle for a few seconds until the windows and power sunroof close Unlocking or locking the
vehicle with Keyless Access.
Convenience closing first closes the windows and then the power sunroof.
Convenience closing of the power sunroof from the outside leaves the rotary switch in the last
selected position. The switch must be newly positioned when starting to drive again.
If convenience closing of the power sunroof requires removing the cover cap of the lock cylinder
on the driver door, the cover cap must be reinstalled after the vehicle is locked Manually unlocking
and locking the driver door.
Pinch protection for the power sunroof and the power sunshade
Pinch protection can help reduce the risk of pinching injuries when closing the power sunroof and the
sunshade . If the power sunroof or the sunshade closing meets resistance or there is something
in the way, the sunroof and sunshade open again immediately.
Check why the power sunroof or the sunshade did not close.
Try to close the power sunroof or the sunshade again.
If the power sunroof or the sunshade still cannot close, the sunroof or sunshade will stop where the
resistance is located. The power sunroof or the sunshade will close the next time without pinch
protection.
Opening and closing the power sunroof without pinch protection

The switch fig. 36, fig. 35 must be rotated to the Closed position (1) A.
Power sunroof: Within 5 seconds after the pinch protection was triggered, pull the rear part of the
switch fig. 36 (5), fig. 35 (5) B until the sunroof is fully closed.
Sunshade: Within 5 seconds after the pinch protection was triggered, press the fig. 37 (2),
fig. 38 (2) switch until the sunshade is fully closed.
The power sunroof or sunshade will now close without pinch protection!
If the power sunroof still will not close, please see an authorized Volkswagen dealer or an
authorized Volkswagen Service Facility.
If you let go of the switch while the roof is closing, the power sunroof opens automatically.
WARNING
Without pinch protection, the power sunroof and sunshade will close with enough force to
cause serious personal injury.
Always be careful when closing the power sunroof.
Always make sure that no one is in the way when overriding the pinch protection to close
the power sunroof or the sunshade!
Pinch protection cannot prevent fingers or other parts of the body from being pressed
against the edge of the roof; injuries may result.
Pinch protection is also active during convenience closing of the windows and the power sunroof
Power windows features.
If the power sunroof malfunctions, pinch protection may not function properly. See an authorized
Volkswagen dealer or an authorized Volkswagen Service Facility for assistance.
Initializing the power sunroof

Initializing the sunroof

If the vehicle battery has been disconnected or is dead, the sunroof must be initialized.
The switch fig. 36, fig. 35 must be rotated to the Closed position (3) A.
Pull the switch at the rear until the sunroof is fully closed.
The power sunroof or sunshade will now close without pinch protection!
Release the switch.
Pull and hold the switch at the rear. The sunroof will open and close on its own.
When the sunroof is closed once again, release the switch.
If the sunroof still will not close, contact an authorized Volkswagen dealer or an authorized
WARNING
Careless or unsupervised use of the sunroof can cause serious injuries.
Always make sure that no one is in the way of the power sunroof when it is closing.
Always take all vehicle keys with you when leaving the vehicle.
Never leave children or persons requiring assistance unattended in the vehicle, especially
if they have access to the remote control vehicle key. Unsupervised use of the remote control
vehicle key can lock the vehicle, start the engine, switch on the ignition and operate the
sunroof.
The sunroof can still be opened or closed for a short period after the ignition has been
switched off, as long as the driver or passenger door is not opened.
WARNING
Closing the sunroof without pinch protection can cause severe injuries.
Always be careful when closing the sunroof.
Always make sure that no one is in the way when overriding pinch protection to close the
sunroof.
Pinch protection does not prevent fingers or other body parts from being pressed against
the roof frame, thereby causing injury.
If the sunroof malfunctions or pinch protection does not operate properly. See an authorized
If the power sunroof malfunctions, pinch protection may not function properly. See an authorized
Adjusting the seating position
Introduction
Examples of improper seating positions
Proper seating position
Manual controls on the driver and front passenger seats
Electrical controls on the driver and front passenger seats
Adjusting the rear seat
Adjusting front and rear head restraints
Removing and reinstalling head restraints
Adjusting the steering wheel position
Center armrest
Number of seats
The vehicle has a total of 5 seating positions: 2 in front and 3 in the rear. Each seating position has a
safety belt.
More information:
Seat functions
Safety belts
Airbag system
Child safety and child restraints
WARNING
Improper seating positions increase the risk of severe or fatal injuries in a crash or other
accidents, especially when the airbag deploys.
All occupants must sit properly and be properly restrained at all times.
Never let more people ride in the vehicle than there are seating positions with safety belts
available.
Always secure children in the vehicle with an approved and suitable restraint system
appropriate for their age, weight, and height Child safety and child restraints, Airbag
system.
Always keep your feet on the floor in front of the seat. Never rest them on the seat,
instrument panel, out of the window, etc. The airbag system and safety belt will not be able to
protect you properly and can even increase the risk of injury in a crash.
WARNING
Always adjust seat, safety belts and head restraints properly before driving and make sure
that all passengers are properly restrained.
Push the passenger seat as far back as possible. Always be sure that there are at least
10 inches (25 cm) between the front passenger's breastbone and the instrument panel.
Always adjust the driver's seat and the steering wheel so that there are at least 10 inches
(25 cm) between your breastbone and the steering wheel.
Adjust the driver's seat so that you can easily push the pedals all the way to the floor
while keeping your knee(s) slightly bent. The distance to the instrument panel in the knee
area must be at least 4 inches (10 cm).
If these requirements cannot be met for physical reasons, contact an authorized
Volkswagen dealer or an authorized Volkswagen Service Facility to see whether adaptive
equipment is available.
Always hold the steering wheel on the outside of the steering wheel rim with your hands
at the 9 o'clock and 3 o'clock positions to help reduce the risk of personal injury if the
driver's airbag inflates.
Never hold the steering wheel at the 12 o'clock position or with your hands at other places
inside the steering wheel rim or on the steering wheel hub. Holding the steering wheel the
wrong way can cause serious injuries to the hands, arms, and head if the driver airbag
inflates.
Pointing the steering wheel toward your face decreases the ability of the driver's airbag to
help protect you in a collision.
Never drive with backrests reclined or tilted back farther than necessary to drive
comfortably. The farther back the backrests are tilted, the greater the risk of injury caused by
incorrect positioning of the safety belts and improper seating position.
Never drive with the front seat passenger backrest tilted forward. If the front airbag
deploys, the front backrest can be forced backward and injure passengers on the rear seat.
Sit as far back as possible from the steering wheel and the instrument panel.
Always sit upright with your back against the backrest with the front seats properly
adjusted. Never lean against or place any part of your body too close to the area where the
airbags are located.
Rear seat passengers who are not properly seated and restrained are more likely to be
seriously injured in a crash.
WARNING
Improper adjustment of the seats can cause accidents and severe injuries.
Never adjust the seats while the vehicle is moving. Your seat may move unexpectedly and
you could lose control of the vehicle. In addition, you will not be in the correct seating
position while adjusting the seats.
Adjust the front seat height, angle and longitudinal direction only if the seat adjustment
area is clear.
The adjustment of the front seats must not be restricted by things in the footwell in front
or behind the seats.
WARNING
Some kinds of cigarette lighters can be lit unintentionally, or crushed causing a fire that can
result in serious burns and vehicle damage.
Always make sure that there are no lighters in the seat tracks or near other moving parts
before adjusting the seats.
Before closing a storage compartment, always make sure that no cigarette lighter can be
activated, crushed, or otherwise damaged.
Never leave a cigarette lighter in a storage compartment, on the instrument panel or in
other places in the vehicle. Heat buildup in the passenger and luggage compartment of a
parked vehicle can result in temperatures in the vehicle that are much higher than the outside
temperatures, particularly in summer. High temperatures could cause the cigarette lighter to
catch fire.
Examples of improper seating positions

Not wearing or improperly fastening safety belts increases the risk of severe or fatal injuries. Safety
belts can work only when they are properly positioned on the body. An improper seating position
significantly impairs the protection provided by safety belts. This can cause severe or even fatal
injuries. Improper seating positions also increase the risk of serious injury or death when an airbag
deploys and strikes an occupant who is not in the proper seating position. The driver is responsible for
all passengers and especially children riding in the vehicle.
The following are only some examples of seating positions that will increase the risk of serious injury
or death.
Therefore, whenever the vehicle is moving

Never stand up in the vehicle.
Never stand on the seats.
Never kneel on the seats.
Never ride with the seat backrest reclined.
Never lean up against the instrument panel.
Never lie down on the rear seat.
Never sit on the edge of the seat.
Never sit sideways.
Never lean out the window.
Never put your feet out the window.
Never put feet on the instrument panel.
Never rest your feet on the seat cushion or back of the seat.
Never ride in the footwell.
Never sit on the front or rear center armrest.
Never ride without your safety belt properly fastened.
Never ride in the luggage compartment.
WARNING
Contact with parts of the vehicle interior can cause serious personal injury in a crash.
Always make sure that all vehicle occupants stay in a proper seating position and are
properly restrained whenever the vehicle is moving.
Improper seating positions increase the risk of serious and fatal injury, especially when an
airbag deploys and strikes a passenger in an improper seating position.
Proper seating position
Fig. 39 The driver should never sit closer than 10 inches (25 cm) of the steering wheel.
Fig. 40 Proper safety belt positioning and head restraint adjustment.
The following describes the proper seating positions for the driver and front seat passengers.
If you have a physical impairment or condition that prevents you from sitting properly on the driver seat
with the safety belt properly fastened and reaching the pedals, special modifications to your vehicle
may be necessary. Only the proper seating position ensures optimum protection by the safety belt and
airbag.
Contact your authorized Volkswagen dealer or authorized Volkswagen Service Facility or call the
Volkswagen Customer CARE Center at 1-800-822-8987 for information about possible modifications
to your vehicle.
For your own safety and to reduce injuries in the event of sudden braking maneuvers or accidents,
Volkswagen recommends the following seating positions:
Applies to all vehicle occupants:

Adjust head restraints so that the upper edge of the head restraint is at least at eye level or higher.
Position the back of your head as close as possible to the head restraint fig. 39 and fig. 40.
Push the head restraint completely down for short people, even if the top of the head is then below
the upper edge of the head restraint.
Tall people should pull the head restraint all the way up.
Adjust the seat backrest angle to an upright position so that your back is in full contact with it when
the vehicle is moving.
Always keep both feet on the floor and in the footwell whenever the vehicle is moving.
Always adjust and fasten safety belts properly Safety belts.
Driver - Seat and steering wheel adjustment:

Adjust the steering wheel so that there are at least 10 inches (25 cm) between the steering wheel
and your breast bone fig. 39. When adjusting the proper distance to the steering wheel, grasp the
top of the steering wheel with your elbows slightly bent.
Always hold the steering wheel on the outside of the steering wheel rim with your hands at the 9
o'clock and 3 o'clock positions to help reduce the risk of personal injury if the driver's airbag inflates.
Never hold the steering wheel at the 12 o'clock position or with your hands at other places inside
the steering wheel rim or on the steering wheel hub. Holding the steering wheel the wrong way can
cause serious injuries to the hands, arms, and head if the driver's airbag inflates.
Adjust the steering wheel so that the steering wheel cover points at your chest and not at your
face. Pointing the steering wheel toward your face decreases the ability of the driver's airbag to help
protect you in a collision.
Adjust the driver's seat so that you can easily push the pedals all the way to the floor while keeping
your knee(s) slightly bent.
Adjust the seat height so that the top point of the steering wheel can be reached.
Always keep both feet in the footwell so that you are in control of the vehicle at all times.
Passenger - front seat adjustment:

Push the passenger seat as far back as possible in order to ensure optimum protection if the
airbag is deployed.
Manual controls on the driver and front passenger seats
Fig. 41 Controls on the left front seat.
The controls on the front passenger seat mirror those on the driver seat.
There may be manual and electrical controls on the same seat.
fig. 41 Function Action
(1) Move the front seat backward or Pull the lever up and move the front seat. The front
forward. seat must lock in place after the lever is released!
(2) Lumbar support control. Push the lever forward or pull it backward.
(3) Adjust backrest angle. Lean forward and turn the adjuster wheel forward or
backward.
(4) Adjust seat height. Move the lever several times up or down.
Electrical controls on the driver and front passenger seats
Fig. 42 Driver seat controls to adjust the seat backward and forward, change seat cushion height and angle,
and adjust backrest angle.
Fig. 43 Lumbar support control.
The controls on the front passenger seat mirror those on the driver seat.
There may be both manual and electrical controls on the same seat.
fig. 42 Press the switch in the direction of the arrow:
(A) (1) Slide the seat backward or forward.
(2) and (3) Raise or lower the seat cushion.
(2) or (3) Adjust seat cushion angle.
Forward or
(B) Adjust backrest angle.
backward.
Press fig. 43 switch for each area:
(1) or (2) Adjust lumbar support.
(3) or (4) Adjust lumbar support height.
WARNING
Improper use of electrical seat controls can cause serious personal injuries.
The front seats in your vehicle can be electrically adjusted even when the vehicle key has
been removed from the ignition or, on a vehicle with Keyless Access, even if there is no key
in the vehicle.
Never leave children and persons who need help in the vehicle alone because the
unsupervised use of the electric seat adjustments can result in serious personal injury.
Always make sure that no one is in the way while the front seats are being adjusted, or
while calling up the stored memory settings for the front seats. In an emergency, stop
automatic seat adjustment by pressing a seat adjustment switch.
NOTICE
To help prevent damage to electrical parts in the seat, do not kneel on the front seats or apply
concentrated pressure to a small area of the seat or backrest.
If the vehicle battery is too weak, the electrical seat adjustment controls may not work.
Starting the engine stops seat adjustment.
When entering and exiting the vehicle, be careful not to come into contact with any switches that
could change the seat adjustment.
Adjusting the rear seat
Fig. 44 Adjusting the rear seat.
Fig. 45 Adjusting the rear backrest.
The rear seat is divided asymmetrically into 2 sections. Each section can be adjusted separately.
Pull right or left lever upwards fig. 44 and push the respective rear seat section forward or
backward. Release the lever and lock the rear seat section by gently sliding it forward or backward.
Place one hand on the right or left rear backrest and pull the respective pull strap with the other hand
fig. 45. Move the rear backrest to the desired position by hand against the force of the spring.
Release the pull strap and lock the rear backrest by gently tilting it forward or backward.
WARNING
Improper adjustment of the rear seat can cause accidents and severe injuries.
Adjust the rear seat only when the vehicle is stopped, since the seat could otherwise
move unexpectedly when the vehicle is moving.
Adjust the rear seat only if no one is in the way.
Always guide the backrest down by hand and never let it fall into place on its own.
NOTICE
Items in the luggage compartment could be damaged or cause damage when the rear seat is
adjusted in the fore and aft direction.
If the rear seat is in a forward position, items can get into the area between the seat and the
luggage compartment floor. When you slide the rear seat back again, make sure that the area
behind the seat is clear of objects.
Adjusting front and rear head restraints
Fig. 46 Adjusting the front head restraints.

Fig. 47 Adjusting or folding the rear head restraints.
Please first read and note the introductory information and heed the WARNINGS 69.
All seats are equipped with head restraints. The rear center head restraint is designed only for the
center seat on the rear bench. Therefore, only install the center head restraint in the center position.
There are notches in the head restraint guide rods so that the head restraint can lock into place. Only
properly installed head restraints can lock into place at the adjustment range notches. In order to
prevent inadvertent removal of the head restraints after installation, there are stops at the top and
bottom of the adjustment range.
Adjusting the height

Push the head restraint up in the direction of the arrow or down when the button fig. 46 (1) or
fig. 47 (1) is pressed .
The head restraint must lock securely in the position selected.
Folding the outer rear head restraints down
With the (2) button pressed, fold the head restraint forward and down .
To use the seating area, fold the head restraint back up until it locks in place.
Proper head restraint adjustment

Adjust head restraints so that the upper edge of the head restraint is at least at eye level or higher.
Position the back of the head as close as possible to the head restraint.
Adjusting the head restraint for short people

Push the head restraint down as far as it will go, even if this means the person's head is still below the
top edge of the head restraint. A small gap may remain between the head restraint and the backrest
when the head restraint is all the way down.
Adjusting the head restraint for tall people

Pull the head restraint up as far as it will go.
WARNING
Driving without head restraints or with improperly adjusted head restraints increases the risk
of serious injuries in a collision.
Always drive with the head restraints in place and properly adjusted to help minimize the
risk of neck injury in a crash.
Every person in the vehicle must have a properly adjusted head restraint to minimize the
risk of neck injury in a crash. Each head restraint must be adjusted according to the
occupants' size so that the upper edge is even with the top of the person's head, but no lower
than eye level. Always sit so that the back of your head is as close as possible to the head
restraint.
Never adjust head restraint while driving.
Removing and reinstalling head restraints
Fig. 48 Removing the front head restraints.
Fig. 49 Removing the rear head restraints.
All seats are equipped with head restraints. The rear center head restraint is designed only for the
center seat on the rear bench. Therefore, only install the center head restraint in the center position.
Removing the front head restraints
Sit in the back seat behind the head restraint you want to remove. Pull the head restraint all the
way up in Adjusting front and rear head restraints. Recline the backrest with the head restraint
so that there is enough overhead clearance to remove it.
Slide a flat object, such as a plastic credit card, underneath the right side of the cap on the right-
hand seat guide rod fig. 48 (2) to unlock the head restraint.
Use one hand to hold the release button in with the flat object. With your other hand, lift the same
guide rod slightly to expose a notch in the rod at the bottom (can be seen and felt with fingers). The
right-hand guide rod is now released.
To release the left-hand guide rod, press button (1) in (towards guide rod) and hold.
Pull the head restraint out completely while holding button (1).
Installing the front head restraints

Position head restraint properly over the head restraint guides of the respective seat backrest and
insert the head restraint into the guides.
Push the head restraint down while pressing button (1) or fig. 49 (1).
Adjust the head restraint according to the occupant's size Adjusting front and rear head
restraints.
Removing the rear head restraint

Unlock the rear bench and fold it forward Luggage compartment.
Pull the head restraint all the way up .
Slide a flat object, such as a plastic credit card, underneath the right side of the cap on the right-
hand seat guide rod (2) to unlock the head restraint.
Use one hand to hold the release button in with the flat object. With your other hand, lift the same
guide rod slightly to expose a notch in the rod at the bottom (can be seen and felt with fingers). The
right-hand guide rod is now released.
To release the left-hand guide rod, press button (1) in (towards guide rod) and hold.
Pull the head restraint out completely while holding button (1).
Fold the backrest of the rear bench back so that it locks securely.
Reinstalling the rear head restraint

Unlock the rear bench and fold it forward Luggage compartment.
Position head restraint properly over the head restraint guides of the respective seat backrest and
insert the head restraint into the guides.
Push the head restraint down while pressing button (1).
Fold the backrest of the rear bench back so that it locks securely.
Adjust the head restraint according to the occupant's size Adjusting front and rear head
restraints.
WARNING
Driving without head restraints or with improperly adjusted head restraints increases the risk
of serious injuries in a collision.
Always drive with the head restraints in place and properly adjusted to help minimize the
risk of neck injury in crash.
Always reinstall head restraints as soon as possible so that vehicle occupants are
properly protected.
NOTICE
When removing or reinstalling the head restraint, take care that the head restraint does not
strike the headliner or the back of the front seat. The headliner or other parts of the vehicle
could otherwise be damaged.
Adjusting the steering wheel position
Fig. 50 Manual adjustment for steering wheel position.
Adjust the steering wheel only when the vehicle is not moving.
Push down on the lever fig. 50 (1).

Adjust the steering wheel so that it can be held with hands at 9 o'clock and 3 o'clock positions on
the outside of the steering wheel rim and with the arms slightly bent at the elbow.
Pull the lever up firmly until it is flush with the steering column .
WARNING
Improper use of the steering column adjustment feature can result in serious personal injury
and even death.
Always pull the lever (1) firmly upward after adjusting the steering column so that the
steering wheel does not change position suddenly while the vehicle is moving.
Never adjust the steering column while the vehicle is moving. If you find that you need to
adjust the steering wheel while driving, stop the vehicle in a safe place and make the proper
adjustment.
Never adjust the steering wheel so that it points toward your face. Always make sure that
the steering wheel points toward your chest. Otherwise, the airbag system cannot protect
you properly in the event of a crash.
Always hold the steering wheel on the outside of the steering wheel rim with your hands
at the 9 o'clock and 3 o'clock positions to help reduce the risk of serious personal injury if the
driver airbag inflates.
Never hold the steering wheel at the 12 o'clock position or with your hands anywhere
inside the steering wheel or on the steering wheel hub. Holding the steering wheel the wrong
way increases the risk of severe injury to the arms, hands, and head if the driver airbag
deploys.
Center armrest
Fig. 51 Front center armrest.
Fig. 52 Folded down rear center armrest with storage compartment (arrow).
Front center armrest

There is a storage compartment under the front center armrest Storage compartment in the front
center armrest.
To open, press button and lift the center armrest section up completely in the direction of the arrow
fig. 51.
To close, push the center armrest down until it latches in place.
To move the center armrest forwards and backwards, pull it forward or slide it backward until it clicks
into place.
Rear center armrest

There may be a fold-down armrest with cup holders in the backrest of the center rear seat Cup
holders in the rear center armrest.
To fold down the center armrest, push the head restraint of the middle seat all the way down
Adjusting the seating position and fold the center armrest forward using the pull strap fig. 52 (1).
The cushion can be pulled off the center armrest from above to access the cup holders beneath it
Cup holders in the rear center armrest. When the cushion is replaced, the notch in the cushion
must be on the left (small arrow) and securely latched.
To fold up, push the center armrest up as far as it will go.
WARNING
The center armrest can restrict the driver's arm movement and cause crashes and serious
personal injury.
Always keep storage compartments in the center armrest closed while driving.
Never let a passenger, especially a child, ride on the center armrest. Improper seating
position can increase the risk of serious personal injury in a crash.
Never put hot drinks or other liquids in the cup holder. Hot liquids can spill when the
vehicle is moving as well as during braking or other sudden maneuvers.
NOTICE
When the center armrest is folded up, the armrest cushion could be soiled or damaged by
items in the luggage compartment.
Seat functions
Introduction
Seat heating
Memory seat
Folding the front passenger backrest forward
More information:
Safety belts
Airbag system
Outside mirrors
WARNING
Improper use of seat adjustment controls can cause severe personal injuries.
Always sit properly at all times before starting to drive and while the vehicle is moving.
Make sure all passengers, especially children, are properly seated whenever the vehicle is
moving.
Keep hands, fingers, feet and other body parts away from moving parts and adjustment
areas of the seats.
Seat heating
Fig. 53 In the center console: Seat heating control for front seats.
When the ignition is switched on, the front seats can be electrically heated by heating elements that
warm the seat backrest and cushion.
Do not use the seat heating if any of the following conditions apply:
If the seat is not being used.
If there is a child restraint installed on the front passenger seat.
If there is a blanket or seat cover on the front passenger seat.
If the seat is damp or wet.
If the outside temperature or the temperature inside the passenger compartment is 77 F (25 C) or
more.
Function Action for seat heating fig. 53
Switch on: Press the or button. Seat heating is switched

on to maximum.
Adjusting heating Press the button or repeatedly until the

level: desired heating level is set.
Switch off: Press the button or repeatedly until all

indicator lights in the button are off.
Special seat heating features

The seat heating on the passenger side is switched off every time the ignition is switched off.
Seat heating must be switched on again each time the ignition is switched on.
On the driver side the seat heating will resume at the setting that was set when the ignition was
switched off. However, this feature only works if the key is not taken out of the ignition switch, or, for
vehicles with Keyless Access, the doors are not opened or the vehicle is not locked.
People suffering from a low level of perceived pain or a lowered awareness of pain as from
medication, paralysis, or chronic illness (e.g. diabetes) should NEVER use the seat heating feature
.
The use of seat heating by persons with these conditions could result in burns to the back, buttocks,
and legs that may take a long time to heal and may never heal completely. If you have any of these
conditions, you should take regular breaks and get out of the vehicle, particularly on long trips. Consult
your doctor for advice regarding your specific condition.
WARNING
Certain medical conditions, such as paralysis and diabetes, and certain medications, can
increase the risk of serious burns when the seat heating feature is switched on.
Vehicle occupants who have a low level of perceived pain or a lowered awareness of pain
can receive serious burns to the back, buttocks, and legs that take a long time to heal or may
never heal completely.
Never use the seat heating feature if you or your passengers are at risk of being burned
because of a medical condition. Take regular breaks and get out of the vehicle, particularly
on long trips. Consult your doctor for advice regarding your specific condition.
Never let exposed skin remain in contact with the seat upholstery when the seat heating is
being used.
WARNING
A wet seat can cause the seat heating to malfunction and increase the risk of serious burns.
Always make sure the seats are dry before using the seat heating.
Never sit on the seat with wet clothes.
Never put damp or wet things including clothes on the seat.
Never spill liquids on the seats.
NOTICE
To help prevent damage to electrical and other parts in the seat, do not kneel on the front
seats or apply concentrated pressure to a small area of the seat or backrest.
Liquids, sharp objects and things that do not let the heat in the seat escape into the air,
including, for example, a child restraint, a blanket or seat covers on the seat can damage seat
heating.
If you smell an odor, immediately shut off seat heating and have it checked by an authorized
Volkswagen dealer or authorized Volkswagen Service Facility.
Never install leather upholstery on a vehicle with seat heating that originally had cloth
upholstery. The seat heating elements for seats with cloth seats will overheat if the cloth
upholstery is replaced with leather upholstery.
Switch off seat heating when it is not needed to help reduce unnecessary fuel consumption.
Memory seat
Fig. 54 Memory buttons on the outer side of the driver seat.
Memory buttons
Personal settings for the driver seat, and the outside mirrors can be assigned to the memory buttons
and to every remote control vehicle key.
These settings can be assigned to individual remote control vehicle keys. The settings are applied
after unlocking the vehicle and opening the driver door.
Storing driver seat settings and forward driving settings for outside mirrors
Apply the electronic parking brake.
Shift the transmission into Neutral (N).
Adjust driver seat and outside mirrors.
Press the SET button fig. 54.
Within about 10 seconds press the desired memory button 1 , 2 or 3 . A chime sounds to confirm
that the setting has been stored.
Storing passenger side outside mirror settings for backing up
Apply the electronic parking brake.
Switch the ignition on.
Briefly press the desired memory button 1 , 2 or 3 on the driver door.
Shift the transmission into Reverse (R).
Adjust the passenger outside mirror to provide good visibility of the curb, for example.
The adjusted mirror position is automatically stored and assigned to the vehicle key used to unlock
the vehicle. The preselected position will be recalled when the key assigned to that mirror adjustment
position is used again.
The passenger-side outside mirror automatically adjusts back from the position stored for backing up
when the vehicle moves forward at about 10 mph (15 km/h) or more or when the rotary knob fig. 96
is rotated from (R) into a different position.
Recalling settings for driver seat and outside mirrors

Briefly press the appropriate memory button when the vehicle is not moving, the ignition is
switched off, and the driver door is open.
OR: If the ignition is switched on and the driver door is closed, press and hold the appropriate
memory button until the stored position is reached.
The passenger-side outside mirror automatically adjusts back from the position stored for backing
up when the vehicle moves forward at about 10 mph (15 km/h) or more or when the rotary knob is
rotated from (R) into a different position.
Assigning driver seat and outside mirror settings to a vehicle key

The memory function of all vehicle keys is disabled when the vehicle is first delivered from the factory.
To enable vehicle key memory feature:
Unlock the driver door.
Press and hold a memory button until memory position is reached.
Press and hold the unlock button on the vehicle key and then press the desired memory button
at the same time within about 3 seconds. A chime sounds to confirm activation.
To disable remote control vehicle key memory function:
Press and hold the SET button.
Press and hold the unlock button on the remote control vehicle key within about 10 seconds. A
chime sounds to confirm deactivation.
Assigning settings to an additional vehicle key

Follow the instructions Assigning driver seat and outside mirror settings to a vehicle key to
assign the driver seat and outside mirror settings to the vehicle key.
Unlock the vehicle with the same vehicle key.
Adjust driver seat and outside mirrors.
Lock the vehicle with locking button in the vehicle key to store the settings.
Once the settings are stored, the driver seat and the outside mirrors move to the stored positions
whenever the vehicle is unlocked with the vehicle key open button and the driver door is opened. If
2 people use the vehicle, each of them should always use the key in which his or her personal settings
have been stored.
Initializing the memory seats

The memory system must be initialized by an authorized Volkswagen dealer, an authorized
Volkswagen Service Facility, or another qualified workshop in certain situations, for instance, if a new
driver seat is installed.
Initializing clears all memories and assignments of the memory seat. After that, memory buttons can
be reprogrammed and assigned to a remote control vehicle key.
Open the driver door but do not enter the vehicle.
Adjust the seats from the outside.
Move the angle of the backrest forward as far as it will go.
Release the backrest adjustment switch and press it again until you hear a chime sound.
Cancellation conditions when storing settings for the memory buttons

When one of the following conditions is met, the storing process will be cancelled:
Charging condition of the vehicle battery is weak.
The SET button is pressed again within about 10 seconds.
The seat position is readjusted within about 10 seconds after pressing the SET button.
Fig. 55 Folding the front passenger backrest forward.
Fig. 56 Unlocking the foldable front passenger backrest.
The front passenger backrest can be folded forward and locked in a horizontal position.
If objects are transported on the front passenger seat while it is folded down, make sure that the
PASSENGER AIR BAG light is on and stays on whenever the ignition is switched on
Remove objects from the front passenger seat .

Move the front passenger seat to the lowest position
Move the front passenger seat to the rearmost position in the seat's fore and aft adjustment range.
Push the head restraint all the way down
Unlock the front passenger backrest in the direction of the arrow fig. 55 (1).
Fold the front passenger backrest forward into the horizontal position in the direction of the arrow
(2).
The front passenger backrest must be securely latched in the folded down position.
Folding the front passenger backrest into place

Make sure that nobody is near the hinges when folding the backrest back into place.
Unlock the front passenger backrest to fold it back fig. 56.
Fold the front passenger backrest into the upright position.
The front passenger backrest must be securely latched in the upright position.
WARNING
Improper folding and improper latching of the front passenger backrest can cause serious
personal injury.
Never fold the front passenger backrest forward or back when the vehicle is moving.
Always make sure that the PASSENGER AIR BAG OFF light is on and stays on
whenever the backrest of the front passenger seat is folded forward.
Always keep hands, fingers, feet and other body parts out of the way of the seat hinges
and the seat locking mechanism when folding the backrest forward and back.
Floor mats and other objects can get caught in the front passenger backrest hinges. This
can cause the front passenger backrest to incorrectly latch when folded back into the upright
position.
When folded back into place, the front passenger backrest must be securely latched in the
upright position. An improperly latched front passenger backrest can suddenly move and
cause serious personal injury.
WARNING
Open seat mountings and hinges of the folded front passenger backrest can cause severe
injuries in the event of a braking maneuver or accident.
Do not let passengers or children occupy the front passenger seat when the front
passenger backrest is folded forward.
When the front passenger backrest is folded down, only the outer seat of the rear bench
behind the driver seat can be occupied. This also applies to children in child safety seats.
Safety belts
Introduction
Warning light
Frontal collisions and laws of physics
What happens to passengers not wearing a safety belt?
Safety belts protect
Using safety belts
Fastening and unfastening safety belts
Safety belt position
Safety belt height adjusters
Safety belt extender
Safety belt retractor, pretensioner, load limiter
Service and disposal of belt pretensioners
Properly worn safety belts are the single most effective means of reducing the risk of serious injury
and death in a collision or other accident.
Damage to safety belts reduces their overall effectiveness and increases the risk of serious personal
injury and death whenever the vehicle is being used.
Check the condition of all safety belts regularly.
If a safety belt shows damage to webbing, bindings, retractors or buckles, have the safety belt
replaced by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility .
More information:
Airbag system
Parts, accessories, repairs and modifications
WARNING
Not wearing a safety belt or wearing an improperly positioned safety belt increases the risk of
severe personal injury or death. Safety belts offer optimum protection only when they are
used properly.
Properly worn safety belts are the single most effective means of reducing the risk of
serious injury and death in a collision or other accident. For this reason, always wear your
safety belt properly and make sure all passengers wear their safety belts properly as well
whenever the vehicle is moving.
The driver must always make sure that every person in the vehicle is properly seated on a
seat of his or her own, properly fastens the safety belts belonging to that seat before the
vehicle starts to move, and keeps the belts properly fastened while riding in the vehicle. This
applies even when just driving around town. Therefore, always wear your safety belts and
make sure that everybody in your vehicle is properly restrained.
Always secure children in the vehicle with a restraint system appropriate for their age,
weight and height
Always fasten safety belts correctly before driving off and make sure that all passengers
are properly restrained.
Never attach the safety belt to the buckle of another seat. Attaching the safety belt to the
wrong buckle will reduce safety belt effectiveness and can cause serious personal injury.
Never let any objects or liquids get into the safety belt latch and prevent it from working
properly.
Never remove a safety belt while the vehicle is moving. Doing so will increase your risk of
being injured or killed.
Never strap more than one person, including small children, into any single safety belt.
Never let children or babies ride sitting on your lap and never place a safety belt over a
child sitting on your lap.
Never wear belts over rigid or breakable objects in or on your clothing, such as eye
glasses, pens, keys, etc., as these may cause injury.
Several layers of heavy clothing (such as a coat worn over top of a sports jacket) may
interfere with proper positioning of the belt and reduce the overall effectiveness of the
system.
Never use comfort clips or devices that create slack in the shoulder belt. However, special
clips may be required for the correct use of some child restraint systems.
Safety belts offer optimum protection only when the seat backrest is upright and belts are
correctly positioned on the body.
WARNING
Damage to safety belts reduces their overall effectiveness and increases the risk of serious
personal injury and death whenever the vehicle is being used.
Never let safety belts become damaged by being caught in the door or seat hardware.
Torn or frayed safety belts can tear, and damaged safety belt hardware can break in an
accident.
Inspect belts regularly for damage. If webbing, bindings, buckles, or retractors are
damaged, have the belts replaced immediately with the correct replacement belts approved
by Volkswagen for your vehicle, model, and model year.
Safety belts that were subject to stress in an accident and stretched must be replaced with
a correct, new safety belt, preferably by an authorized Volkswagen dealer or authorized
Replacement after a crash may be necessary even if a safety belt shows no visible
damage. Anchorages that have been loaded must also be inspected.
Damaged safety belts must be replaced; they cannot be repaired.
Never try to repair a damaged safety belt yourself. Never remove or modify the safety belts
in any way.
Have safety belts, bindings, retractors and buckles replaced by an authorized Volkswagen
dealer or authorized Volkswagen Service Facility.
Always keep the belts clean. Dirty belts may not work correctly and can impair the
function of the inertia reel.
Warning light
Fig. 57 Warning light in the instrument cluster.
Lights
up or Possible cause Proper response
flashes
Driver and front passenger have not

fastened their safety belts, if front Fasten safety belts.
passenger seat is occupied.
Remove items from front passenger seat and

Heavy items on the front passenger seat.
stow them safely.
A warning chime also sounds.
The safety belt warning light comes on for 6 seconds when the ignition is switched on. A warning
chime also sounds for up to 6 seconds if the driver's safety belt is not buckled. The chime stops
sooner if the driver buckles his or her safety belt. The warning light and the chime also go out when
both driver and front passenger have bucked their safety belts.
If the driver and front seat passenger do not both fasten their safety belts within about 24 seconds
after the chime stops and the vehicle is moving at a speed of more than about 15 mph (25 km/h), the
chime will again sound for about 6 seconds, then go off for about 24 seconds, then sound again for
about another 6 seconds. The same thing happens if one of the safety belts is fastened and then
unfastened while the vehicle is moving. The safety belt warning light also flashes . The warning
chime continues to sound at 24 seconds intervals for up to 2 minutes. No chime sounds at speeds of
less than about 5 mph (8 km/h).
If the ignition is switched on, the safety belt warning light stays until the driver and front passenger
have both buckled their safety belts.
WARNING
Not wearing a safety belt or wearing an improperly positioned safety belt increases the risk of
severe personal injury or death. Safety belts offer optimum protection only when used
correctly.
Frontal collisions and laws of physics
Fig. 58 A vehicle with passengers not wearing safety belts approaches a wall.
Fig. 59 A vehicle with passengers not wearing safety belts hits a wall.
The physical principles of a frontal collision are simple. Both the moving vehicle and the passenger
possess energy fig. 58, which varies with vehicle speed and body weight. Engineers call this energy
kinetic energy.
The higher the speed of the vehicle and the greater the vehicle's weight, the more energy has to be
absorbed in the crash.
Vehicle speed is the most significant factor. If your speed doubles (for example from 15 mph to
30 mph - 25 km/h to 50 km/h), the energy increases 4 times!
Because the occupants of the vehicle in the above example are not using safety belts, they are not
attached to the vehicle. In a frontal collision, they will keep moving at the same speed the vehicle
was moving just before the crash, until something stops them - here, the inside of the passenger
compartment. Because the occupants of the vehicle in the example are not wearing safety belts, their
entire kinetic energy will be absorbed by impact with the wall fig. 59.
The same principles apply to people in a vehicle that is in a frontal collision on the highway. Even at
city speeds of 20 to 30 mph (30 to 50 km/h), the forces acting on the body can reach one ton (2000 lbs
or 1000 kg) or more. At greater speeds, these forces are even higher.
Of course, the laws of physics don't apply just to frontal collisions; they determine what happens in all
kinds of accidents and collisions.
What happens to passengers not wearing a safety belt?
Fig. 60 The unbelted driver is thrown forward.

Fig. 61 Unbelted passengers in the rear seats are thrown forward on top of the belted driver.
Many people believe that it is possible to resist the forces of an impact by holding tight or bracing
themselves. That is simply not true!
Even at low collision speeds, the forces acting on the body are too much for the body to be held in the
seat with the arms and hands. In a frontal collision, unrestrained occupants will slam violently into the
steering wheel, instrument panel, windshield or anything else in the way fig. 60.
Never rely on airbags alone for protection. Even when they deploy, airbags provide only additional
protection. Airbags are not supposed to deploy in all kinds of accidents. Even if your vehicle is
equipped with airbags, all vehicle occupants, including the driver, must wear safety belts correctly in
order to minimize the risk of severe injury or death in a crash, regardless of whether a seating position
has an airbag or not.
An airbag will deploy only once. Safety belts are always there to offer protection in those accidents in
which airbags are not supposed to deploy or when they have already deployed. Unbelted occupants
can also be thrown out of the vehicle, causing even more severe injuries or death.
It is also important for occupants in the rear seats to wear their safety belts properly since they can be
thrown violently forward through the vehicle in the event of an accident. Unbelted passengers in the
rear seats endanger not only themselves but also the driver and other passengers in the vehicle
fig. 61.
Safety belts protect
Fig. 62 Belted driver secured by the correctly worn safety belt in the event of a sudden braking maneuver.
Used properly, safety belts can make a big difference. Safety belts help to keep passengers in their
seats, gradually reduce energy levels applied to the body in a collision, and help prevent the
uncontrolled movement that can cause serious injuries. In addition, safety belts reduce the danger of
being thrown out of the vehicle fig. 62.
Safety belts attach passengers to the car and give them the benefit of being slowed down more gently
or softly through the give in the safety belts, crumple zones, and other safety features (such as
airbags) engineered into today's vehicles. The front crumple zones and other passive safety features
(such as the airbag system) are also designed to absorb kinetic energy. By absorbing the kinetic
energy over a longer period of time, the forces on the body become more tolerable and less likely to
cause injury.
Although these examples are based on a frontal collision, safety belts can also substantially reduce
the risk of injury in other kinds of crashes. So, whether you're on a long trip or just going to the corner
store, always buckle up and make sure that others do, too.
Accident statistics show that vehicle occupants properly wearing safety belts have a lower risk of being
injured and a much better chance of surviving a collision. Properly using safety belts also greatly
increases the ability of the supplemental airbags to do their job in a collision. For this reason, wearing
a safety belt is required by law in most countries including the United States and Canada.
Although your Volkswagen is equipped with airbags, you still have to wear the safety belts provided.
Front airbags, for example, are activated only in some frontal collisions. The front airbags are not
activated in all frontal collisions, in side and rear collisions, in rollovers, or in cases when the
conditions for deployment stored in the electronic control unit are not met. The same goes for the other
airbag systems on your Volkswagen.
So always wear your safety belt and make sure that everybody in your vehicle is properly restrained!
Using safety belts

Checklist
Using safety belts :

Check the condition of all safety belts regularly.
Keep safety belts clean.
Keep objects and liquids away from safety belt webbing, the safety belt buckle tongue, and the
safety belt buckle latch and opening.
Do not pinch or damage the safety belt or buckle tongue (for instance, when closing a door).
Never modify, disassemble or try to repair safety belts and safety belt anchorages.
Always fasten your safety belt properly before driving and keep it fastened whenever the vehicle is
moving.
Twisted safety belt

If it is difficult to pull the safety belt out of the belt guide, the belt may be twisted inside the side trim
because the belt retracted too quickly when it was taken off.
Hold the safety belt tongue, slowly and carefully pull safety belt all the way out.
Untwist the safety belt and slowly return the belt by hand.
If you cannot untwist the safety belt, wear it anyway. Make sure that the safety belt is twisted in a spot
where it does not come in direct contact with your body. Have the safety belt untwisted immediately by
an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
Lockable safety belt

The retractors for the rear seat safety belts and the front passenger safety belt have a switchable
locking feature for child restraints in addition to the emergency locking feature. Whenever a child
restraint is installed with a safety belt, the safety belt must be locked so that the safety belt webbing
cannot unreel. The switchable locking feature lets you lock the belt so that a child restraint can be
properly installed and, for example, so that it can't tip to the side when the vehicle goes around a
corner Child safety and child restraints.
To see whether a safety belt is lockable, pull the safety belt all the way out of the safety belt retractor.
You should then hear a clicking sound as the belt winds back into the retractor reel. Test the
switchable locking feature by pulling on the belt. When the switchable locking feature is active, you
should no longer be able to pull the belt out of the retractor.
The locking feature must be deactivated when a vehicle occupant uses the safety belt.
WARNING
Improper use and care of safety belts increases the risk of severe personal injury or death.
Regularly check safety belts and related parts for damage.
Always keep safety belts clean.
Never catch, damage or chafe safety belt webbing on sharp edges.
Always keep objects and liquids away from the belt buckle and buckle opening.
Fastening and unfastening safety belts
Fig. 63 Inserting the buckle tongue into the belt buckle.

Fig. 64 Releasing the buckle tongue from the belt buckle.
Properly worn safety belts help to hold occupants in their seats and provide optimum protection during
braking or in a collision or other accident .
The switchable locking feature makes a clicking sound when the safety belt is winding back onto the
safety belt retractor wheel after being pulled all the way out. Whenever a child restraint is installed with
a safety belt, the safety belt must be locked so that the safety belt webbing cannot unreel Child
safety and child restraints. If active, deactivate the locking feature before using the safety belt to
restrain a person without a child restraint system.
Fastening safety belts

Always buckle your safety belt before driving.
Adjust the front seat and head restraint correctly Adjusting the seating position.
Make sure the seat backrest of the rear seat bench is in an upright position and securely latched in
place before using the safety belt .
Hold the safety belt by the tongue and pull it slowly and evenly across the chest and pelvis. Do not
twist the safety belt webbing .
Insert the tongue into the correct buckle for your seat until you hear it latch securely fig. 63.
Pull on the safety belt to make sure that it is securely latched in the buckle.
Unfastening safety belts
Unfasten safety belts only when the vehicle is not moving .
Press the red button on the buckle fig. 64. The buckle tongue is ejected.
Let the belt wind up on the retractor as you guide the belt tongue to its stowed position to help
prevent the safety belt from twisting and to help avoid damage to the interior trim.
WARNING
Improperly positioned safety belts can cause serious personal injury or death in an accident.
A person who is not properly restrained can be seriously injured by the safety belt itself if
it slips from the stronger parts of the body into sensitive areas like the abdomen.
Unfastening safety belts while the vehicle is in motion can cause severe personal injury or
death in the event of an accident or braking maneuver!
Safety belt position
Fig. 65 Proper safety belt positioning and head restraint adjustment.
Fig. 66 Proper safety belt positioning for expectant mothers.
Wearing safety belts improperly can cause serious injury or death. Safety belts can only work when
they are correctly positioned on the body. A properly worn safety belt also helps to position the
occupant so that an airbag can provide maximum protection when deployed. Therefore, always fasten
your safety belt and make sure that it is properly positioned over your body.
Improper seating positions reduce the effectiveness of safety belts and even increase the risk of injury
or death by moving the safety belt to critical areas of the body. Improper seating positions also
increase the risk of severe injury or death when an airbag deploys and strikes an occupant who is not
seated properly Adjusting the seating position.
Proper safety belt position

The shoulder portion of the safety belt must always run over the center of the shoulder and never
over the throat, over the arm, under the arm or behind the back.
The lap portion of the safety belt must always run as low as possible over the pelvis and never
over the abdomen.
Always wear the safety belt flat and snug against the body. Pull on the safety belt to tighten if
necessary.
Expectant mothers must always wear the lap portion of the safety belt as low as possible across the
pelvis and below the rounding of the abdomen throughout the pregnancy. The safety belt must lie
flat against the body to avoid pressure against the abdomen fig. 66.
Adjusting safety belt height

The safety belt position can be adjusted using the following features:
Safety belt height adjusters for the front seats.
Front seats with height adjustment.
WARNING
Improperly positioned safety belts can cause serious personal injury in an accident or a
sudden braking maneuver.
Always make sure that all vehicle occupants are correctly restrained and stay in a correct
seating position whenever the vehicle is being used.
A loose-fitting safety belt can cause serious injuries by shifting its position on your body
from the strong bones to more vulnerable soft tissue and cause serious injury.
The shoulder belt portion of the safety belt must be positioned over the middle of the
occupant's shoulder and never across the neck or throat.
The safety belt must lie flat and snug on the occupant's upper body.
Never wear the shoulder part of the safety belt under your arm or otherwise out of
position.
The lap portion of the safety belt must be positioned as low as possible across the pelvis
and never over the abdomen. Make sure the belt lies flat and snug against the pelvis. Pull on
the safety belt to tighten if necessary.
Expectant mothers must always wear the lap portion of the safety belt as low as possible
across the pelvis and below the rounding of the abdomen.
Do not twist the belt when attaching it. If you cannot untwist a twisted safety belt, wear it
anyway, but make sure the twisted part is not in contact with your body. Have the problem
corrected right away by an authorized Volkswagen dealer or authorized Volkswagen Service
Facility.
Never hold the safety belt away from your body with your hand.
Never wear belts over rigid or breakable objects, such as eye glasses, pens or keys.
Never modify the position of the belt using comfort clips, loops or similar devices.
If you have a physical impairment or condition that prevents you from sitting properly on the seat
with the safety belt properly fastened, special modifications to your vehicle may be necessary.
Contact your authorized Volkswagen dealer or authorized Volkswagen Service Facility or call the
Volkswagen Customer CARE Center at 1-800-822-8987 for information about possible modifications
to your vehicle.
Safety belt height adjusters
Fig. 67 Next to the front seats: Safety belt height adjuster.
Safety belt height adjusters for the front seats can be used to adjust the height of the shoulder portion
of the safety belt so that it is positioned correctly:
Press and hold the safety belt attachment fig. 67.

Pinch the safety belt attachment together as indicated by the arrows and slide the seat belt
attachment to the desired position .
Slide the belt and upper attachment up or down until the safety belt is positioned over the center of
the shoulder Safety belt position.
Release the safety belt attachment.
Pull on the safety belt to make sure that the upper attachment is securely locked in place.
WARNING
Never adjust the height of the safety belt while driving.
Safety belt extender
Fig. 68 A safety belt extender properly attached to the factory-installed safety belt.
Fig. 69 Positioning of the safety belt extender.
If a safety belt is too short to correctly fit you or one of your passengers even when the safety belt is
pulled out all the way, you can use a safety belt extender.
Never use the safety belt extender for any other purpose including the attachment of a child
restraint.
The extender adds about 8 inches (20 cm) to the safety belt. Always remove the safety belt extender
when it is not needed and stow it safely. Contact an authorized Volkswagen dealer or authorized
Volkswagen Service Facility if you believe you may need an extender.
Key to fig. 68:
(1) Vehicle safety belt buckle.
(2) Buckle tongue on the safety belt extender.
(3) Safety belt buckle on the safety belt extender.
(4) Safety belt buckle tongue on the factory-installed safety belt.
Key to fig. 69:
(A) Safety belt buckle on the safety belt extender.
(B) Distance between the safety belt buckle on the safety belt extender and the centerline of the
person using the safety belt extender. The distance must be more than 6 inches (15 cm)!
(C) Centerline of the person using the safety belt extender.
Using a safety belt extender
Adjust both the seat and the head restraint properly Adjusting the seating position.
Insert the buckle tongue on the safety belt extender fig. 68 (2) into the vehicle belt buckle for the
seat where the safety belt extender is being used (1).
Fastening or unfastening the vehicle safety belt Fastening and unfastening safety belts.
Pull the belt to make sure that the tongues are securely locked in the buckles.
Make sure that the safety belt is positioned properly Safety belt position.
Properly using safety belt extenders

Use a safety belt extender only when the factory installed safety belt is too short when worn
properly by a person in proper seating position.
Only use one safety belt extender per seat and vehicle safety belt.
Always remove the safety belt extender when it is not needed.
Never leave a safety belt extender attached to the vehicle safety belt buckle when the extender is
not needed and being used with the safety belt. Otherwise, the airbag control module will receive an
incorrect signal from the safety belt buckle and this will prevent the airbag from working properly for a
person who is not using the safety belt. Leaving the extender attached to the safety belt buckle when
the front seat is occupied and the safety belt is not being used will signal the airbag control unit during
a collision that the front passenger seat is occupied and that the safety belt is being used. The
electronic control unit for the airbag system will then receive incorrect information that will cause the
safety belt pretensioner to deploy unnecessarily and the front passenger airbag to deploy later in
collisions that would normally trigger the front airbag earlier in the collision to help protect an
unrestrained front seat occupant. The airbag will not be able to provide enough protection for an
occupant not wearing a safety belt.
Only use the safety belt extender approved by Volkswagen for your vehicle.
WARNING
Improper use or positioning of a safety belt extender increases the risk of serious personal
injury and death.
A driver or passenger who is not properly restrained can be seriously injured by striking
the interior of the passenger compartment or by the safety belt itself, which can be displaced
from stronger parts of the body into sensitive areas like the abdomen.
Safety belt extenders offer optimum protection only when they are properly used.
Only use the extender when the belt is not long enough to be worn low and snug and the
person is in the correct seating position. Remove and stow extender safely when not needed.
Always make sure the safety belt tongue of the safety belt extender is securely inserted
into the buckle for the seating position that belongs to the seat where the safety belt extender
is being used. Attaching the safety belt to the wrong buckle will reduce safety belt
effectiveness and can cause serious personal injury.
Never use the safety belt extender if you can properly attach the safety belt without it.
Using a safety belt extender when not needed can increase the risk of injury, especially in a
collision.
Never use a safety belt extender if the distance fig. 69 (B) between the front edge of the
safety belt extender buckle (A) and the centerline of the person using the safety belt extender
(C) is less than 6 inches (15 cm).
Never leave a safety belt extender attached to the vehicle safety belt buckle when the
extender is not needed and being used with the safety belt. Otherwise, the airbag control
module will receive an incorrect signal from the safety belt buckle and this will prevent the
airbag from working properly for a person who is not using the safety belt.
Never use more than one extender with a safety belt. Using more than 1 extender can
change the way the safety belt passes over the body and can cause serious injury.
Never use the safety belt extender to secure a child restraint.
Never use a safety belt extender on your Volkswagen that you got from another
automobile manufacturer or from an automotive parts store.
Never use the safety belt extender you got for your vehicle for any other vehicle,
regardless of make, model, or model year.
NOTICE
Leaving the extender attached to the safety belt buckle when the front seat is occupied and the
safety belt is not being used will signal to the airbag control unit that the front passenger seat is
occupied and that the safety belt is being used. The electronic control unit for the airbag system will
then receive incorrect information that will
cause the safety belt pretensioner to deploy unnecessarily in collisions;
cause the front passenger airbag to deploy later in collisions in which the front airbag
would otherwise be triggered earlier to help protect an unrestrained front seat passenger.
A pretensioner that has deployed cannot be repaired. The entire safety belt must be
replaced.
NOTICE
If the safety belt extender is left attached to the safety belt buckle, the safety belt warning
system will sense that the safety belt for that seat is being used. The warning light will not
come on and the warning chime will not sound even though the seat is occupied and the safety
belt is not being used.
Safety belt retractor, pretensioner, load limiter
The safety belts in the vehicle are part of the vehicle's safety concept Safety equipment and consist
of the following important features:
Automatic safety belt retractors

Every safety belt is equipped with an automatic belt retractor on the shoulder belt. As long as the
safety belt is pulled out slowly, the shoulder belt will extend to let you move freely under normal driving
conditions. The automatic safety belt retractor locks the belt when the belt is pulled out fast, during
hard braking and in a collision. The belt may also lock when you drive up or down a steep hill or
through a sharp curve.
Safety belt pretensioner

The retractors for the driver and front passenger have a pretensioner that helps take the slack out of
the safety belt and tighten it when the pretensioner is activated.
The pretensioners are activated by the electronic control unit for the airbag system in front, side, and
rear collisions. By tightening the safety belt, the pretensioner helps to reduce the occupant's forward
movement. The belt pretensioner works together with the airbag system; its function is monitored by
the airbag system indicator light. The belt pretensioner will not deploy in a rollover if the side airbags
are not activated.
A fine dust may be released upon activation. This is normal and is not caused by a fire in the vehicle.
Safety belt load limiter

The front and rear safety belts also have load limiters to help reduce the forces applied to the body in
a crash.
Heed all safety regulations if the vehicle or individual components of the system have to be
scrapped. Your authorized Volkswagen dealer and authorized Volkswagen Service Facility are familiar
with these regulations Service and disposal of belt pretensioners.
Service and disposal of belt pretensioners

The pretensioners are part of the safety belts installed at the front seats in your vehicle. Installing,
removing, servicing, or repairing of safety belt pretensioners can damage the safety belt system and
prevent it from working correctly in a collision. The pretensioners themselves may then also not work
in the event of an accident, or not work properly.
There are some important things you have to know to make sure that the effectiveness of the system
will not be impaired and that discarded components do not cause injury or pollute the environment.
Undeployed safety belt pretensioners and airbag modules contain explosive materials that can cause
serious injuries to the general public and to people who work at dealerships and workshops, scrap
yards, and recycling facilities. For this reason, the systems must be properly handled when they or the
vehicles they are installed in are scrapped.
Undeployed safety belt pretensioners and airbag modules can also pollute the environment. Never
abandon vehicles or vehicle parts. If your vehicle must be scrapped, please make sure that it is done
safely, responsibly, and in compliance with all applicable environmental regulations. Take it to a
licensed facility that has the knowledge and experience to properly dispose of the vehicle and its
safety belt system. Your authorized Volkswagen dealer and authorized Volkswagen Service Facility
are familiar with these regulations.
WARNING
Improper handling, care, servicing, and repair procedures can increase the risk of personal
injury and death by preventing a belt pretensioner from activating when needed or by
causing it to activate unexpectedly.
The pretensioner can be activated only once. If a pretensioner has been activated, the
safety belt must be replaced.
Safety belt systems including the pretensioners cannot be repaired. Special procedures
are required to remove, install, and dispose of this system.
Never repair, adjust, or change pretensioners or any other part of the safety belt system
yourself. We strongly recommend that you have any work on the safety belt system
performed by an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
They have the necessary technical information, training, and special equipment Parts,
accessories, repairs and modifications.
WARNING
Undeployed safety belt pretensioners and airbag modules contain explosive materials that
can cause serious personal injuries if they are not properly handled when they or the
vehicles they are installed in are scrapped.
Never abandon vehicles or vehicle parts.
Always scrap vehicles and vehicle parts, especially those containing undeployed airbag
modules and undeployed safety belt pretensioners, at a licensed facility that has the
knowledge and experience to properly dispose of the vehicle and its safety belt and airbag
systems.
Undeployed airbag modules and safety belt pretensioners are classified as Perchlorate
Material. Special handling may apply see http://www.dtsc.ca.gov/hazardouswaste/perchlorate. Obey
all applicable legal requirements regarding handling and disposal of the vehicle or parts of its restraint
system, including airbag modules and safety belts with pretensioners. Authorized Volkswagen dealers
and authorized Volkswagen Service Facilities are familiar with the requirements, and we recommend
that you have them perform this service for you.
Lights
Introduction
Indicator lights
Turn signal lever and high beam switch
Switching lights on and off
Lights and vision features
Coming home and Leaving home feature (orientation lighting)
Instrument panel lighting and headlight range adjustment
Always obey local vehicle lighting laws.

The driver is always responsible for the correct headlight settings.
More information:
Exterior views
Changing a light bulb
WARNING
Headlights that are aimed too high and improper use of the headlight flasher or high beams
can blind and distract other drivers. This can lead to a crash and serious personal injuries.
Always make sure that headlights are properly adjusted.
Never use the headlight flasher or high-beams when they can blind or distract other
drivers.
Indicator lights
Lights
up
Replace burned out bulb or

One or more driving lights not working or if all light bulbs are OK, visit an authorized
cornering light malfunction. Volkswagen dealer or authorized
Volkswagen Service facility.
Cornering light system malfunction.

See an authorized Volkswagen dealer or
Adaptive Front Lighting System authorized Volkswagen Service Facility
malfunction.
Lights
up
Left or right turn signal.

Check the turn signals on the vehicle and
The indicator light blinks twice as fast if a the trailer.
turn signal is not working on the vehicle or
the trailer.
Daytime running lights (DRL) on.
High beams switched on or headlight

flashers in use.
WARNING
Whenever stalled or stopped for repair, move the vehicle a safe distance off the road, stop
the engine, turn on the emergency flashers, and use other warning devices to warn
approaching traffic.
Never park the vehicle in areas where the hot catalytic converter and exhaust system can
come into contact with dry grass, brush, spilled fuel, oil, or other material that can catch fire.
A broken down vehicle presents a high accident risk for itself and others. Switch on
emergency flashers and set up a warning triangle to warn oncoming traffic.
NOTICE
High Intensity Discharge (HID) headlights provide bright, uniform lighting to help you see and be
seen. The light comes from an electric arc between two electrodes in the gas-filled bulb. Over time, the
electrodes can wear down and the gap between them will get wider. The HID lamps control unit then
increases the voltage to keep the arcs brightness constant. However, the commonly called Xenon
bulbs will also ultimately burn out. Before they burn out, HID lamps can flicker. A message will then
appear in the MFI. This is your reminder to see an authorized Volkswagen dealer or an authorized
Volkswagen Service facility to check the headlights.
Turn signal lever and high beam switch
Fig. 83 Turn signal lever and high beam switch.
Move the lever to the desired position.
(A) Right turn signal.
(B) Left turn signal.
(C) Switching high beams on . An indicator light comes on in the instrument cluster when
the high beams are switched on.
(D) Switching the high beams off and operating the headlight flasher: The headlight flasher turns on
the high beams as long as the lever is pulled and manually held in the pulled position. The
indicator light lights up. When released, the lever moves back to the home position and turns
off the high beams. The indicator light goes out.
Move the lever back to the home position to turn the feature off.
Convenience turn signal (lane change feature)

To use the convenience turn signal feature, move the lever up or down slightly, just to the point of
resistance and then release it. If you have the convenience turn signal (Conv. turn sig.) switched
on, the turn signals and the turn signal indicator flash 3 times. If it is switched off, they flash as long as
you hold the lever up or down, and go out when you release the lever.
The convenience turn signal is switched on and off in the Lights & Vision menu in the instrument
cluster display Volkswagen Information System. If your vehicle is not equipped with the Lights &
Vision menu, the convenience turn signal feature can be deactivated by an authorized Volkswagen
WARNING
Improper use of high beams can cause distract and blind others, causing accidents and
serious injuries.
The turn signal light works only when the ignition is switched on. The emergency flasher works
even when the ignition is switched off In an emergency.
The indicator light flashes twice as fast if a turn signal bulb is burned out.
High beams can only be switched on when low beams are on.
Switching lights on and off
Fig. 84 Headlight switch next to the steering wheel: A: Vehicles with front fog lights. B: Vehicles without front
fog lights.
Adjust the light switch to the desired position fig. 84:
When the ignition is switched off When the ignition is switched on
Fog lights, low beams and parking lights Headlights off daytime running lights (DRL)
switched off. on.
Low beams off. Parking lights and Low beams switched on.
daytime running lights on. The length of
time they stay on depends on the battery
charge.
Fog lights switched off. The DRL may

Headlights and fog lights switched on.
stay on for some time.
Fog lights:
The indicator light in the headlight switch or the instrument cluster shows that the fog lights are
switched on.
To switch on the fog lights : first turn the light switch to position , then pull the light switch out
to the first detent.
To switch off the fog lights, push the switch back in from the first detent. To then turn off the
headlights, turn the switch to position .
Acoustic warning when lights are not switched off

In the following situation, a warning chime will sound if you take the key out of the ignition and open
the driver door. This is to remind you that lights are still on.
Light switch in position if the vehicle has no orientation lighting Coming home and
Leaving home feature (orientation lighting).
WARNING
Daytime running lights and parking lights are not bright enough to let you see ahead or be
seen by others when it is dark.
Always switch on the low-beam headlights at dusk or when it is dark and whenever the
weather is bad or visibility is poor.
Never use the daytime running lights to see where you are going. They are not bright
enough and will not let you see far enough ahead for safety, especially at dusk or when it is
dark. Always switch on the low-beam headlights at dusk or when it is dark.
The taillights do not come on with the daytime running lights. Unless the taillights are on,
a vehicle cannot be seen by others in bad weather, at dusk, or when it is dark.
In cool or humid weather, the insides of the headlights, the taillights, and turn signals can
temporarily fog up. This is normal and does not affect the service life of the vehicle's lighting system.

Daytime running lights (DRL)

Separate lamps are installed in the headlights or in the front bumper for the daytime running lights.
When the daytime running lights are switched on, only these separate lamps come on .
The daytime running lights are switched on whenever the ignition is switched on and the light switch is
in position . The indicator light or in the instrument cluster indicates that the feature is active
Indicator lights.
Daytime running lights (DRL) parking feature

Some models are equipped with a daytime running lights (DRL) parking feature that switches the
daytime running lights off when the vehicle is parked and the ignition is switched on.
Function Action
Switching the DRL off: Switch the ignition on.

Turn the light switch to the position.
Set the parking brake.
Switching the DRL back on: Release the parking brake.
Static cornering lights

Your vehicle may have fog lights under the front bumper that are also static cornering lights. At speeds
below about 25 mph (40 km/h), the light on one side of the vehicle will come on when you turn a
corner. If you turn to the right, the right fog light comes on; turn left and the left fog light comes on. The
light dims and goes out when the steering wheel is straightened out again.
When you move the selector lever to Reverse (R), the static cornering lights on both sides of the
vehicle may come on so that you can see the area around the vehicle better when backing up.
The static cornering lights work only when the headlights are on. The static cornering lights do not
come on when the headlight switch is in the position or when the fog lights themselves have been
switched on 110.
Adaptive Front Lighting System (AFS)
The Adaptive Front Lighting System works only with the low beams switched on and only at speeds
above about 6 mph (10 km/h). The swivel-mounted lamps automatically improve road illumination
during cornering.
On vehicles equipped with the Adaptive Front Lighting System, the feature is switched on and off via
the Assistant menu
WARNING
Crashes and other accidents can happen when you cannot see the road ahead and when you
cannot be seen by other motorists.
Never use daytime running lights (DRL) to see where you are going. DRL are not bright
enough to light up the roadway and be seen by other motorists. You will not be able to see far
enough ahead for safety, especially at dusk or when it is dark. Always switch on the low-
beam headlights at dusk or when it is dark.
The taillights do not come on when the daytime running lights are switched on. A vehicle
without taillights on cannot be seen by others in bad weather, at dusk, or when it is dark.
In cool or humid weather, the insides of the headlights, rear lights, and turn signals can
temporarily fog up. This is normal and does not affect the service life of the vehicle's lighting system.
Coming home and Leaving home feature (orientation lighting)

The Coming home feature must be switched on manually. The Leaving home feature is
automatically controlled by a low-light sensor.
Coming home Operation

Operate the headlight flasher for about 1 second 109
Switch on: The Coming home lighting is switched on when the driver door is open and
the low light sensor detects darkness. The delay period starts once the last
vehicle door or the rear hatch is closed.
Automatically after delay period is over.

Automatically, if a vehicle door or the rear hatch is still open about
Switch off: 30 seconds after activation.
Turn light switch to position.
Leaving home Operation
Switch on: Unlock the vehicle and the low light sensor registers darkness.
Leaving home Operation
Automatically after preset delay period is over.

Lock the vehicle.
Switch off:
Turn the light switch to the position.
Background lighting in the outside mirrors

The background lighting in the outside mirrors lights up the area close to the doors while you are
getting into or out of the vehicle. It is switched on when the vehicle is unlocked, a vehicle door is
opened, or the Coming home or Leaving home feature is activated. If the vehicle is equipped with a
light sensor, the background lighting in the outside mirrors is only switched on in darkness.
The delay period can be adjusted and the feature can be switched on and off in the Lights &
Vision menu Volkswagen Information System.
If the Coming home feature is switched on and the driver door is opened, no acoustic chime will
sound to alert you that the lights are still on.
Instrument panel lighting and headlight range adjustment
Fig. 85 Next to the headlight switch: Control for instrument cluster lighting.
Instrument panel lighting

When the lights are on, the brightness of the instrument panel lighting is adjusted by turning the
thumbwheel fig. 85.
In some vehicles with daytime running lights (DRL), the instrument cluster lighting switches on
automatically when it is dark outside or when driving through tunnels, for example. You will need to
switch the headlights on manually when this happens, so that the vehicle's taillights will turn on
Dynamic headlight range adjustment - Adaptive Front Lighting System

The headlight range is automatically adjusted to the vehicle load when the Adaptive Front Lighting
System is switched on.
WARNING
Headlights that are aimed too high because of the way the vehicle is loaded can blind and
distract other drivers. This can lead to a crash and serious personal injuries.
Always adjust headlights to loading conditions so that they do not blind others.

Button Function
Interior lights off.
Door contact switch - center position.

Interior lights go on automatically when the vehicle is unlocked, a door is opened or the
vehicle key is removed from the ignition.
The lights go out about 20 seconds after you close the doors. They also go out when
you lock the vehicle or switch on the ignition.
Interior lights on.
Reading light on or off.
Glove and luggage compartment lights

The glove and luggage compartments may have lights that come on automatically when they are
opened and go off when they are closed.
Background lighting
When the ignition and headlights are switched on, the roof console control buttons light up.
There may also be footwell lighting.
The interior and reading lights go out when you lock the vehicle or a few minutes after you
remove the vehicle key from the ignition. This helps to prevent unnecessary drain on the vehicle
battery.
Sun protection
Introduction
Sun visors
Windshield made of heat-insulating glass
WARNING
Sun visors and side windows shades can reduce visibility.
Always stow sun visors and side window shades when not needed to block sun glare.
Sun visors
Fig. 86 Sun visor.
Sun visor adjustment:

Flip the sun visor down toward the windshield.
Lift it out of the retaining clip and swivel it over toward the door fig. 86 (1).
Vanity mirror and lighting

A vanity mirror is behind a cover in the sun visor. When the cover is slid open (2), the light (3) comes
on.
The light goes out when you shut the cover or if you flip the sun visor up again.
The vanity mirror light and the interior light above the sun visor go out after several minutes. This
helps to prevent unnecessary drain on the vehicle battery.
Windshield made of heat-insulating glass
Fig. 87 Heat-reflective windshield with communications window (blue shaded area).
Windshields made of insulating glass have a transparent metallic infrared-reflecting coating. There is
an uncoated area (communications window) just above the inside rearview mirror fig. 87. This
serves as a communications window for transmitting signals to and from electronic components and
accessories.
The uncoated area must not be blocked on the inside or outside or covered with stickers because this
can cause the electronic components to malfunction.
Windshield wipers and washer
Introduction
Indicator light
Windshield wiper lever
Windshield wiper functions
Windshield wiper service position
Rain sensor
Checking and refilling windshield washer fluid
More information:
Exterior views
Climate control
Working in the engine compartment
Exterior care and cleaning
WARNING
Windshield washer fluid without enough frost protection can freeze on the windshield and
reduce visibility.
Use the windshield washer system with enough frost protection for winter temperatures.
Never use the windshield wipers/washers when it is freezing without first defrosting the
windshield. The washer solution may freeze on the windshield and reduce visibility.
WARNING
Worn or dirty wiper blades reduce visibility and increase the risk of accidents and severe
injuries.
Always replace wiper blades that are worn, damaged, or do not keep the windshield clear.
NOTICE
To help prevent damage to the wiper blades and the wiper motor when it is cold outside,
always make sure that blades are not frozen to the windshield before operating the wipers.
Using the windshield wiper service position can be helpful in cold weather so the wipers do not
freeze to the windshield
Indicator light
Lights
up
Refill windshield washer reservoir at the next

Not enough windshield washer fluid.
opportunity
NOTICE
Windshield wiper lever
Fig. 88 Operating the front windshield wiper.
Fig. 89 Operating the rear wiper.
Move the lever to the desired position :
(A) Wiper switched off.

Move the lever to the desired position :
Intermittent wiping for the windshield.

(B) Adjust the interval settings with switch fig. 88 (1) (vehicles without rain sensors) or
the sensitivity of the rain sensor (vehicles with rain sensors).
(C) Slow wiper speed.
(D) Fast wiper speed.
(E) x One-tap wiping brief wiping. Hold the lever pressed down longer to wipe more often.
Pull the lever toward the steering wheel to activate the windshield washers, then
(F)
release.
(G) Intermittent wiping for the rear window. The wiper wipes about every 6 seconds.
Press the lever forward as far as it will go to activate the rear window washers, then
(H)
release.
NOTICE
To help prevent damage to the wiper blades and the wiper motor when it is cold outside,
always make sure that blades are not frozen to the windshield before operating the wipers.
Using the service position can be helpful in cold weather so the wipers do not freeze to the
windshield Windshield wiper service position.
If the ignition is switched off while the wipers are running, the wipers will continue at the
same wiping speed when the ignition is switched on again. Frost, ice, snow, leaves, and other
objects on the windshield can damage the wipers and the wiper motor.
Remove snow and ice from the wipers before you begin driving.
If the wiper blades freeze to the windshield, loosen them carefully. Volkswagen
recommends using a deicing spray.
NOTICE
Never switch on the windshield wipers when the windshield is dry because the windshield can
be scratched.
The windshield wipers work only if the ignition is switched on and the engine hood is closed. The
windshield wipers turn off automatically when the engine hood is opened. The rear windshield wipers
turn off automatically when the rear hatch is opened.
If the front wipers are on, the rear wiper is switched on automatically when backing up.
If the windshield wiper lever is in the rear window intermittent wiping position fig. 89 (G) when
the ignition is switched off and back on or the engine is started, rear window wiper action does not
resume until the windshield wipers are activated. This is to keep the wiper from working when the
window is dry. By switching rear window intermittent wiping off and then back on, you can override this
feature and activate the rear window wiper immediately.
The intermittent wiping for the front windshield depends on the driving speed. The higher the
speed, the faster the wipers move.
If the wiper blades freeze to the windshield, loosen them carefully. Volkswagen recommends
using a deicing spray.
Windshield wiper functions

Wiper performance in different situations:
When the vehicle is not moving: The wiper speed changes temporarily to the next lower
speed.
During automatic wipe/wash: While the washer system is working, the Climatronic
switches to recirculation for about 30 seconds to help
prevent the washer fluid odor from entering the vehicle
interior.
During intermittent wiping: Speed-dependent interval control: The higher the vehicle
speed, the faster the wipers move.
Heated washer nozzles

The heating thaws frozen water nozzles, but not the fluid supply hoses. When the ignition is switched
on, the heat applied to the washer nozzles is automatically regulated depending on the outside air
temperature.
If there is something on the windshield, the wiper will try to wipe it away. If it continues to block
the wiper, the wiper will stop moving. Remove the obstacle and switch the wiper on again.
Windshield wiper service position
Fig. 90 Windshield wiper in service position.
In the service position, the wiper arms can be lifted away from the windshield fig. 90. The wipers
are moved to the service position as follows:
The engine hood must be closed Working in the engine compartment.

Switch the ignition off, turn it on briefly, and then off again.
Press the windshield wiper lever down briefly fig. 88 (E) when the ignition is off.
Wipers move into service position.
Carefully fold the wiper arms back onto the windshield before driving! Switch the ignition on and press
the windshield wiper lever down briefly fig. 88 (E). The wiper arms move back to their original
position.
Lifting the wiper blades and tilting them away from the windshield
Put the wiper arms in service position .

Do not handle the wiper blades, handle the wiper arms only at the attachment above the wiper
blades.
NOTICE
To help prevent damage to the engine hood and the windshield wiper arms, lift the wiper
arms away from the windshield only when they are in the service position.
Always carefully fold the windshield wiper arms down against the windshield before driving
the vehicle.
Rain sensor
Fig. 91 Windshield wiper lever: Adjusting rain sensor 1.
Fig. 92 Sensitive rain sensor surface.
When switched on, the rain sensor automatically shortens or lengthens the delay between wiping
intervals depending on how hard it is raining . The rain sensor's sensitivity can be adjusted
manually. Manual wiping (vehicles without rain sensors)
Push the lever into the desired position fig. 91:

(A) Rain sensor off windshield wiper lever home position).
(B) Rain sensor active automatic wiping as needed.
(1) Adjusting the sensitivity of the rain sensor:
Move switch to the right high sensitivity.
Move switch to the left low sensitivity.
After switching the ignition off and back on again, the rain sensor stays on and works again with the
wiper lever in position (A) when the vehicle speed is over 10 mph (16 km/h).
Even if the rain sensor is disabled, it is still necessary to reach this speed to reactivate the wipers
when the windshield wiper lever is in the intermittent wiping position. The wipers then wipe at fixed
intervals instead of wiping as needed, as they do in rain sensor mode.
Possible reasons for changes in the way the rain sensor works
The rain sensor may misread what is happening in the detection zone of its sensitive rain-sensor
surface fig. 92 (arrow) and not work for a number of reasons, which include:
Worn out wiper blades: Worn out wiper blades may leave a film of water or wiping streaks; this can
cause the wipers to run longer, to wipe more often, or to wipe continuously at high speed.
Insects: Insects hitting the sensor may trigger the wipers.
Salt streaks: Salt streaks on the windshield from winter driving can cause wiping more often or
continuously on glass that is almost dry.
Dirt: Caked-on dust, wax, any other buildup on the windshield (lotus effect), or car-wash detergent
residue can lower the rain sensor's sensitivity and cause it to react too slowly or not at all.
Crack or chip in the windshield: If a stone hits and chips the windshield while the rain sensor is on,
this will trigger a wiper cycle. After that, the rain sensor will recognize the change and recalibrate itself
to respond to the smaller detection zone. Depending on the size of the chip, the sensor's reaction
pattern may or may not change.
WARNING
The rain sensor cannot always recognize rain and activate the wipers.
Switch the wipers on manually when water on the windshield reduces visibility.
Clean the rain sensor's sensitive surface regularly and check the wiper blades for wear or
damage.
To remove wax and coats of polish safely, we recommend using an alcohol-based windshield
cleaner.
Checking and refilling windshield washer fluid
Fig. 93 In the engine compartment: Cap of the windshield washer fluid reservoir.
Check the windshield washer fluid level regularly and refill as necessary.
There is a filter screen in the filler neck of the windshield washer fluid reservoir. The screen helps to
keep large particles and debris from getting into and clogging the windshield washer nozzles when
adding windshield washer fluid. Take the screen out only to clean it. If the screen is damaged or
missing, have it replaced immediately, otherwise the system may become clogged and not work
properly.
Open the engine hood
The windshield washer fluid reservoir can be identified by the symbol on its cap fig. 93.
Check if there is still enough windshield washer fluid in the reservoir.
Refill with an appropriate windshield washer fluid that is recommended by Volkswagen .
Follow the directions on the container.
In cold weather, always use a special windshield washer antifreeze solution that will help keep the
water from freezing .
Recommended cleaners
For the warmer months, Windscreen Clear SummerG 052 184 A1 or equivalent. Mixing ratio
1:100 (1 part concentrate to 100 parts water) in the windshield washer reservoir.
All-season Windscreen ClearG 052 164 A2 or equivalent. the mixing ratio in winter to 0 F (-18 C)
about 1:2 (1 part concentrate to 2 parts water), otherwise, mixing ratio 1:4 in the windshield washer
reservoir.
Filling capacity
The windshield washer fluid reservoir holds about 3.2 qts. (3.0 liters).
WARNING
Never mix antifreeze or similar additives into the windshield washer reservoir. This could
produce an oily film on the windshield, which would considerably reduce visibility.
Use clear water with a cleaning solution recommended by Volkswagen.
If necessary, blend with a suitable windshield washer fluid antifreeze agent.
NOTICE
Never mix cleaning solutions recommended by Volkswagen with other cleaning agents. If
you do, this could cause sediments or other by-products that can clog the windshield wiper
nozzles.
When refilling, do not confuse one type of operating liquid with another! Otherwise serious
malfunctions and engine damage can occur!
Mirrors
Introduction
Inside mirror
Outside mirrors
For your driving safety, it is important that you properly adjust the outside mirrors and the inside mirror
before you start driving .
The outside mirrors and the inside mirror help you see and adapt your driving to traffic behind you.
Remember that the inside and outside rearview mirrors will not show everything behind you. There
can be blind spots. Blind spots can be significantly larger if the mirrors are not properly adjusted.
More information:
Exterior views
Memory seat
Shifting
Braking and parking
WARNING
Adjusting mirrors when the vehicle is moving can cause driver distraction, accidents, and
serious personal injury.
Always adjust the rearview mirrors when the vehicle is not moving.
Always be aware of what is happening around the vehicle when changing lanes, passing,
turning, or parking. Another vehicle, pedestrian, or object could be in your blind spot.
Always make sure mirrors are properly adjusted and the view to the rear is not reduced by
moisture, ice, snow, or other things.
WARNING
Auto-dimming mirrors contain an electrolyte fluid which can leak if the mirror glass is broken.
Electrolyte fluid can irritate the skin, eyes, and respiratory system.
Repeated or prolonged exposure to electrolyte fluid can irritate the respiratory system,
especially among people with asthma or other respiratory conditions. Get fresh air
immediately by leaving the vehicle or, if that is not possible, open windows and doors all the
way.
If electrolyte fluid gets into the eyes, flush them thoroughly with large amounts of clean
water for at least 15 minutes; medical attention is recommended.
If electrolyte fluid contacts skin, flush affected area with clean water for at least
15 minutes and then wash affected area with soap and water; medical attention is
recommended. Thoroughly wash affected clothing and shoes before reuse.
If swallowed, and the person is conscious, rinse mouth with water for at least 15 minutes.
Get medical attention immediately. Do not induce vomiting unless instructed to do so by a
medical professional.
NOTICE
Broken glass in the auto-dimming mirrors can cause electrolyte fluid leakage. Liquid
electrolyte leaked from a broken mirror glass will damage any plastic surfaces it comes in
contact with. Clean up spilled electrolyte fluid immediately with clear water and a sponge.
Inside mirror
Fig. 94 Manually adjustable inside mirror.
Fig. 95 Auto-dimming inside mirror.
Adjust the inside mirror to make sure that there is good visibility through the rear window.
For example, visibility through the rear window could be impaired if there is a sunshade on the rear
window or clothing on the luggage compartment cover, or if the rear window is covered with ice, snow,
or dirt.
Manually adjustable inside mirror

Home position: Lever on the bottom edge of the mirror points forward.
To adjust to non-glare visibility, move the lever so that it points backwards fig. 94.
Auto-dimming inside mirror (if applicable)

Key to fig. 95:
(1) Indicator light.
(2) Switch.
(3) Sensor for recognizing entry of light.
The auto-dimming feature can be switched on and off with the switch on the inside mirror (2). When
auto-dimming is activated, the indicator light (1) is on.
If the ignition is switched on, the sensor (3) automatically darkens the inside mirror depending on the
amount of light shining into the vehicle from the rear.
The auto-dimming feature is deactivated when you shift the transmission into reverse or switch on the
interior lights or the reading light.
Do not attach external navigation devices to the windshield or in the vicinity of the auto-dimming inside
mirror .
WARNING
The illuminated display on an external navigation device can cause the auto-dimming inside
mirror to malfunction, which can result in crashes and serious injuries.
Malfunctions in the auto-dimming function can result in the rearview mirror being unable
to evaluate the exact distance of vehicles in the rear or other objects.
If the light striking the sensor is filtered or blocked (such as by a sunshade), the auto-dimming
inside mirror will not work properly or may not work at all.
Outside mirrors
Fig. 96 In the driver door: Adjusting knob for outside mirrors.
Turn the knob fig. 96 to adjust the outside mirrors.
Turn the rotary knob to the desired position:
Switch on outside mirror heating. Heats only at outside air

temperatures below +68 F (+20 C).
Adjust the left outside mirror by pressing the knob to left/right

and up/down.
Turn the rotary knob to the desired position:
Adjust the right outside mirror by pressing the knob to left/right

and up/down.
Neutral position. Outside mirror folded out, no heating or

adjustment possible.
Synchronous mirror adjustment

In the Settings - Convenience menu select Mirror adjust: Both mirrors for synchronous
outside mirror adjustment
Turn the adjusting knob to the L position.
Adjust the left outside mirror. The right (passenger) outside mirror will automatically adjust at the
same time.
If needed, correct the position of the right mirror by turning the adjusting knob to the R position.
Auto-dimming outside mirror on the driver side

The auto-dimming outside mirror is controlled together with the auto-dimming inside mirror Inside
mirror.
Memory for front passenger side mirror (when backing up)

Choose the remote control vehicle key that will be used with the settings about to be made.
Unlock the vehicle with that remote control vehicle key.
Set the parking brake.
Activate the function Mirror down in the Settings - Convenience menu.
Shift the transmission into reverse.
Adjust the passenger outside mirror for a clear view of the curb, for example.
The adjusted mirror position is automatically stored and assigned to the vehicle key used to unlock
the vehicle. The preselected position will be recalled when the key assigned to that mirror adjustment
position is used again.
Recalling passenger side mirror settings

Turn the adjusting knob for the side mirrors to the R position.
Shift the transmission into reverse gear with the ignition switched on.
The mirror moves back to the regular position when the vehicle moves forwards faster than about
10 mph (15 km/h) or the adjusting knob is turned to the O or L position.
WARNING
Improper use of the folding outside mirrors can cause personal injury.
Always make sure that nobody is in the way when folding the mirrors in or out.
Make sure that you do not get your finger caught between the mirror and the mirror base
when moving the mirrors.
WARNING
Incorrectly estimating distances with the right outside mirror can cause collisions and
serious injury.
The right outside mirror has a convex (curved) surface. This widens your field of vision.
But vehicles or other objects seen in a convex mirror will look smaller and farther away than
they really are.
If you use the right outside mirror to judge distances from vehicles behind you when
changing lanes, you could estimate incorrectly and cause a crash and serious injuries.
Whenever possible, use the inside mirror to more accurately judge distance and size of
vehicles or other objects seen in the convex mirror.
Always make sure you have a clear view to the rear of the vehicle.
NOTICE
Always fold in the outside mirrors when taking the vehicle through an automatic car wash.
Never fold power mirrors in manually because doing so could damage the electrical drive.
To reduce fuel consumption, use outside mirror heating only when needed.
When first switched on, outside mirror heating works with maximum heat for about 2 minutes.
If power mirror adjustment does not work, the outside mirrors can be adjusted by hand by
pressing on the edges of the mirror surface.
Driving tips
Introduction
In this section youll find information about
Stowing luggage
Driving with an open rear hatch
Driving a loaded vehicle
Weights and axle weights
Always stow heavy objects in the luggage compartment and make sure that the rear seat backrests
are securely latched. Always use the tie-downs in the luggage compartment and secure the objects
with suitable straps. Never overload the vehicle. Remember that the vehicle load, as well as how it is
distributed, can affect vehicle handling and braking .
More information:
Rear hatch
Folding down the passenger seat backrest forward
Lights
Luggage compartment
Roof rack
Trailer towing
Tires and wheels
WARNING
Unsecured or incorrectly stowed items can fly through the vehicle, causing serious personal
injury during hard braking or sharp steering or in an accident. Loose items can also be struck
and thrown through the passenger compartment by the front airbags if they inflate. To help
reduce the risk of serious personal injury:
Always stow all objects securely in the vehicle.
Always keep storage compartments closed while driving.
Do not stow hard, heavy, or sharp objects in open bins in the vehicle or on top of the
instrument panel.
Remove hard, heavy, and sharp objects from clothing and bags in the vehicle interior and
stow securely. Always put heavy items in the luggage compartment.
Always secure objects in the passenger compartment properly with suitable straps so that
they cannot move into the deployment area of a side or front airbag during braking, in a
sudden maneuver, or in a collision.
Always make sure that there is nothing on the front passenger seat when the backrest is
folded forward. When the backrest is folded forward, even light objects could be pushed into
the seat cushion and cause the weight-sensing mat in the seat to register enough weight to
turn the airbag on
Always make sure that the PASSENGER AIR BAG light is on and stays on whenever
the backrest of the front passenger seat is folded forward
Passengers must never ride in an incorrect seating position because objects are being
transported in the vehicle.
Never let anybody sit in a seat that is blocked by objects being carried in the vehicle.
WARNING
Heavy loads will influence the way your vehicle handles and increase stopping distances.
Heavy loads that are not properly stowed or secured can cause loss of control and serious
injury.
Secure the load properly to keep it from shifting.
Always remember when transporting heavy objects that a change in the center of gravity
also changes the way your vehicle handles:
Always distribute the load as evenly as possible.
Secure heavy objects properly as far forward in the luggage compartment as possible.
Always tie down heavy items securely with suitable straps using the tie-downs in the
luggage compartment.
Securely latch the rear seat backrest in the upright position.
Never exceed the Gross Axle Weight Rating or the Gross Vehicle Weight Rating on the
safety compliance sticker on the left door jamb. Exceeding permissible weight can cause the
vehicle to skid and handle differently.
Always adapt your speed and driving to the heavier load and the weight distribution in the
vehicle. Take road, weather, traffic, and visibility conditions into account as well.
Always accelerate gently and avoid sudden braking and driving maneuvers.
Always brake earlier than you would if you were not driving a loaded vehicle.
Stowing luggage
Always stow all luggage securely in the vehicle

Distribute the load in the vehicle and in the trailer as evenly as possible.
Put heavy objects as far forward as possible in the luggage compartment and securely latch the
rear seat backrest in the upright position.
Secure luggage in the luggage compartment to the tie-downs with suitable straps Luggage
compartment.
Adjust the headlight range
Check the pressure in all 4 tires when the tires are still cold. Never reduce air pressure in warm
tires to match cold tire inflation pressure. Heed the information on the tire pressure label Tires and
wheels.
Pay especially close attention to your vehicle's Tire Pressure Monitoring System when driving with
a heavy load Tire Pressure Monitoring System (TPMS).
NOTICE
The defroster heating wires or antenna in the rear window can be damaged by objects that rub
against them.
Please review information about loading a trailer Trailer towing and a roof rack Roof rack.
Driving with an open rear hatch
Driving with an open rear hatch can lead to serious personal injury. If you have to drive with an open
rear hatch, make sure that all objects and the hatch itself are properly secured and take appropriate
measures to keep toxic exhaust fumes from entering the vehicle.
WARNING
Driving with an unlatched or open rear hatch can lead to serious personal injury.
Never transport objects larger than those fitting completely into the luggage compartment,
because the rear hatch cannot be closed properly.
After closing the hatch, always pull up on it to make sure that it is properly closed and
cannot open suddenly when the vehicle is moving.
Always stow all objects securely in the luggage compartment. Loose objects can fall out
of the luggage compartment and injure others on the road behind you.
Drive carefully; anticipate what other drivers will do.
Avoid abrupt or sudden acceleration, steering, or braking, because the unlatched rear
hatch can move suddenly.
Always mark objects sticking out from the luggage compartment clearly for others to see.
Obey all applicable legal requirements.
Never use the rear hatch to clamp or hold objects that stick out of the luggage
compartment.
Always remove any luggage rack or other rack mounted on the rear hatch (along with any
luggage on the rack) before driving with an open rear hatch.
WARNING
Driving with an open rear hatch can cause poisonous carbon monoxide in the engine exhaust
to get into the passenger compartment.
Carbon monoxide causes drowsiness, inattentiveness, poisoning, and loss of
consciousness. It can lead to accidents and severe personal injuries.
Always keep the rear hatch closed while driving to help keep poisonous exhaust fumes
from being drawn into the vehicle.
Never transport objects that are too large to fit completely into the luggage area, because
then the rear hatch cannot be fully closed.
If you absolutely must drive with an open rear hatch, do the following to reduce the risk of
carbon monoxide poisoning:
Close all windows and the power sunroof.
Switch off the climate control system's air recirculation feature.
Open all air vents in the instrument panel.
Set the fresh air fan to the highest speed.
NOTICE
The open rear hatch changes the vehicle's length and height.
Driving a loaded vehicle
For good handling when driving a loaded vehicle, please observe the following:
Securely stow all luggage Stowing luggage.

Drive especially carefully and accelerate gently.
Avoid sudden braking and driving maneuvers.
Brake earlier than you would if you were not driving a loaded vehicle.
If applicable, observe information about driving with a trailer Trailer towing.
If applicable, observe information about driving with a roof rack Roof rack
WARNING
Heavy loads can change the way your vehicle handles and increase stopping distances.
Heavy loads that are not properly stowed or secured can shift suddenly, causing loss of
control and serious injury.
Secure the load properly to keep it from shifting.
Always remember when transporting heavy objects that they change the vehicle's center
of gravity and also the way it handles.
Always distribute the load as evenly as possible.
Secure heavy objects as far forward in the luggage compartment as possible.
Use your vehicle's luggage compartment tie-downs with suitable straps.
Always tie down heavy items securely with suitable straps.
Securely latch the rear seat backrest in the upright position.
Never exceed the Gross Axle Weight Rating or the Gross Vehicle Weight Rating on the
safety compliance sticker on the left door jamb. Exceeding permissible weight can cause the
vehicle to skid and handle differently.
Always adapt speed and driving to the heavier load and the weight distribution in the
Always accelerate gently and avoid sudden braking and driving maneuvers.
Always brake earlier than you would if you were not driving a loaded vehicle.
Weights and axle weights

The actual gross weight of any vehicle depends on the engine, basic equipment, any factory-installed
optional equipment for the given model, and any accessories that have been installed. The Gross
Vehicle Weight Rating (GVWR) and the Gross front and Rear Axle Weight Ratings (GAWR) for a
given vehicle are printed on the vehicle's Safety Compliance Certification Label on the driver door
jamb.
The Gross Vehicle Weight Rating includes the weight of the vehicle itself with all of its factory-
installed equipment, plus a full tank of gasoline, the engine oil and coolant, all vehicle occupants
(150 lbs/68 kg per seating position) and cargo.
The Gross Axle Weight Ratings specify the maximum allowable load for each axle.
The cargo payload may not be increased by using a roof rack without commensurately reducing the
weight from vehicle occupants . Determining the Gross Vehicle Weight Rating Tires and
wheels.
Vehicle payload consists of the combined weight of the following:
Passengers.
Total luggage and other cargo.
Factory-installed or retrofitted accessories.
Roof load including roof rack system.
Hitch weight and tongue weight for trailer operation.
Please refer to the Gross Vehicle Weight Rating (GVWR) and the Gross front and rear Axle Weight
Ratings (GAWR) for your vehicle, which are printed on the vehicle's Safety Compliance Certification
Label on the driver door jamb.
WARNING
Exceeding maximum permissible weight ratings can result in vehicle damage, accidents, and
Never let the actual weights at the front and rear axles exceed the permissible Gross Axle
Weight Rating. Also, never let the total of these actual weights exceed the Gross Vehicle
Weight Rating.
Always remember that the vehicle's handling and braking will be affected by extra load
and the distribution of this load. Adjust your speed accordingly.
NOTICE
Always distribute the load evenly and as low as possible in the vehicle. The vehicle capacity
weight figures apply when the load is distributed evenly in the vehicle (passengers and
luggage).
When transporting a heavy load in the luggage compartment, carry the load as close to the
rear axle (as far forward) as possible so that the vehicle's handling and braking are affected as
little as possible.
Luggage compartment
Introduction
Folding the rear seat backrest forward and back into place
Removing and reinstalling the rear seat
Luggage compartment cover
Luggage compartment pass-through
Tie-downs
Shopping bag hooks
Luggage net
Variable luggage compartment floor
Always stow heavy objects in the luggage compartment and make sure that the rear seat backrests
are securely latched in their upright position. Always secure objects to the tie-downs with suitable
straps. Never overload the vehicle. Remember that the vehicle load, as well as how it is distributed,
can affect vehicle handling and braking .
More information:
Safety belts
Airbag system
Lights
Transporting
Trailer towing
Tires and wheels
WARNING
An open or unlocked luggage compartment poses special risks for children.
Close and lock the rear hatch and all doors when the vehicle is not in use. First, make
certain that no one is left inside.
Never leave your vehicle unattended or let children play around the vehicle, especially
with the rear hatch left open. A child could crawl into the vehicle and pull the hatch shut,
becoming trapped and unable to get out. This could cause severe or fatal injuries.
A closed vehicle can become very hot or very cold, depending on the season.
Temperatures can quickly reach levels that can cause unconsciousness or death, particularly
to small children.
Never let children play in or around the vehicle.
Never let anyone ride in the luggage compartment.
WARNING
Unsecured or incorrectly stowed items can fly through the vehicle, causing serious personal
injury during hard braking or sharp steering or in an accident. Loose items can also be struck
and thrown through the passenger compartment by the front airbags if they inflate. To help
reduce the risk of serious personal injury:
Always stow all objects securely in the vehicle. Always put luggage and heavy items in the
Always secure objects in the passenger compartment properly with suitable straps so that
they cannot move into the deployment zone of a side or front airbag during a sudden braking,
in a sudden maneuver, or in a collision.
Never stow hard, heavy, or sharp objects in the vehicle's open storage compartments, on
the shelf behind the rear seat bench, or on the top of the instrument panel.
Always remove hard, heavy, or sharp objects from clothing and bags in the vehicle
interior and stow them securely in the luggage compartment.
WARNING
Transporting heavy objects causes the handling characteristics of the vehicle to change and
increases braking distances. Heavy loads which are not properly stowed or secured in the
vehicle can lead to a loss of vehicle control and cause serious person injury.
Transporting heavy items causes the handling characteristics of the vehicle to change by
shifting the vehicle's center of gravity.
Always distribute luggage evenly and as low as possible within the vehicle. The vehicle
capacity weight figures apply when the load is distributed evenly in the vehicle (passengers
and luggage).
Always stow luggage and heavy items in the luggage compartment as far forward of the
rear axle as possible and secure them with appropriate straps to the tie-downs provided.
Never exceed the vehicle's Gross Vehicle Weight Rating or Gross Axle Weight Ratings,
which are printed on the Safety Compliance Certification Label located on the door jamb of
the driver door. Exceeding the permissible weight can cause the vehicle to skid and behave
differently.
Always adapt your speed and driving style to accommodate your payload and its weight
distribution within your vehicle.
Be especially cautious and gentle when stepping on the accelerator pedal and avoid
sudden braking and other maneuvers.
Brake earlier than you would if you were not driving a loaded vehicle.
NOTICE
The defroster heating wires or antenna in the rear window can be damaged by objects that
rub against them.
The ventilation slots between the rear window and the luggage compartment cover must not be
blocked so that stale air can escape from the vehicle.
Folding the rear seat backrest forward and back into place
Fig. 97 Folding the backrest forward and back.
The rear backrest is divided into 2 sections. Each section of the rear seat backrest can be folded down
individually to increase the luggage space.
Folding the rear seat backrest forward

Push the head restraint all the way down Adjusting the seating position.
Push the rear seat all the way back Adjusting the rear seat.
Pull the pull strap forward in the direction of the arrow fig. 97 while folding the rear backrest
forward.
If the rear backrest is folded down, no one, including children, may ride on the rear seat.
Folding the rear backrest back into place
Fold the rear backrest back until it engages securely .

The rear backrest must be securely latched into place for the safety belts on the rear seats to
provide optimal protection.
WARNING
Improper folding and improper latching of the rear seat backrest can cause serious personal
injury.
Always make sure there are no people or animals in the area around the rear seat backrest
when folding it forward.
Never fold the rear seat backrest up or down while the vehicle is moving.
When folding the rear seat backrest back up, make sure that the safety belt does not get
caught or damaged.
Keep hands, fingers, feet and other body parts out of the away when folding the rear seat
backrest up and down.
Each rear seat backrest must be securely latched into place in the upright position so that
the safety belts on the rear seats can provide protection. This is particularly the case for the
middle seat on the rear bench.
If a seat is used with an unsecured backrest, the passenger will move forward together
with the rear seat backrest during sudden braking, driving maneuvers, or a collision.
No one, including children, may ride on the rear seats if the rear seat backrest is folded
down or not correctly latched.
NOTICE
Before folding the rear seat backrest forward, adjust the front seats so that the rear seat's head
restraint or backrest cushion will not touch the front seats.
NOTICE
Items in the luggage compartment could be damaged or cause damage when the rear seat is
adjusted in the fore and aft direction.
Removing and reinstalling the rear seat
Fig. 98 Front attachment of the rear seat.

Fig. 99 Rear attachment of the rear seat.
Perform the following work yourself only if you have the necessary knowledge and experience to do so
safely. Volkswagen recommends having the work performed by an authorized Volkswagen dealer or
The lug wrench from the vehicle tool kit is required for removing and installing the rear seat Vehicle
tool kit.
Removing the rear seat
1. Push the driver seat and front passenger seat as far forward as possible Adjusting the seating
position.
2. Remove all rear head restraints Adjusting the seating position.
3. Remove the luggage compartment cover Luggage compartment cover.
4. Remove the luggage compartment floor Variable luggage compartment floor.
5. Remove the spare wheel and foam insert from the vehicle Compact spare wheel.
6. Move the backrests to the upright position and lock them Adjusting the rear seat.
7. Push the rear seats as far back as possible Adjusting the rear seat.
8. Unclip the small covers (not pictured) on the hexagonal nuts in the rear footwell fig. 98 (arrows).
9. Remove all hexagonal nuts (arrows) with the lug wrench.
10. Remove the 3 plastic covers.
11. Push the rear seats all the way forward Adjusting the rear seat.
12. Remove all hexagonal nuts fig. 99 (arrows) in the luggage compartment using the lug wrench.
13. First, lift the smaller rear seat on the right from the vehicle through the right rear door.
14. Then lift the left rear seat from the vehicle through the rear hatch.
Installing the rear seat
1. Push the driver seat and front passenger seat as far forward as possible Adjusting the seating
position.
2. Then lift the left rear seat into the vehicle through the rear hatch.
3. Set the seat rails of the rear seat first on the front anchoring studs and then on the rear studs.
4. Secure both seat rails of the rear seat in front and back with 2 hexagonal nuts each, tightening the
nuts by hand - do not tighten them with the lug wrench yet.
5. Lift the right rear seat into the vehicle through the right rear door.
6. Set the seat rails of the rear seat first on the front anchoring studs and then on the rear studs.
7. Secure both seat rails of the rear seat in front and back with 2 hexagonal nuts each, tightening the
nuts by hand - do not tighten them with the lug wrench yet.
8. To align the seat rails, press the left rear seat all the way to the left in the vehicle.
9. To align the seat rails, press the right rear seat all the way to the right in the vehicle.
10. Tighten the hexagonal nuts in the luggage compartment (arrows) to 44 ft-lbs (60 Nm) using a
torque wrench. If no torque wrench is available, tighten the hexagonal nuts using the lug wrench
and have the torque checked at a qualified workshop as soon as possible.
11. Push the rear seats as far back as possible Adjusting the rear seat.
12. Remove the hexagonal nuts in the rear of the footwell again, set the 3 plastic covers fig. 98 on
the studs and screw on with the hexagonal nuts.
13. Tighten the hexagonal nuts (arrows) to 44 ft-lbs (60 Nm) using a torque wrench. If no torque
wrench is available, tighten the hexagonal nuts using the lug wrench and have the torque checked
at a qualified workshop as soon as possible.
14. Clip on the small covers (not pictured) on the hexagonal nuts (arrows).
15. Install the foam insert and spare wheel in the vehicle Compact spare wheel.
16. Install the luggage compartment floor Variable luggage compartment floor.
17. Install the luggage compartment cover Luggage compartment cover.
18. Install all rear head restraints Adjusting the seating position.
WARNING
No one may ride in the back of the vehicle when the rear seat has been removed.
WARNING
An improperly installed rear seat can separate from its mountings during an accident.
All securing bolts must be tightened to the specified torque after the rear seat has been
installed.
CAUTION
Sharp-edged parts are located on the underside of the rear seat.
Protect your hands when you lift the rear seat in or out.
NOTICE
Have at least one person help to lift the rear seat in or out. One person should be in the
vehicle and one outside.
The lever fig. 44 for the fore and aft adjustment of the rear seat must not be operated
while the seat is removed. If the position of the fore and aft adjustment is changed, the rear
seat can only be installed by a qualified workshop.
Luggage compartment cover
Fig. 100 Installing and removing the luggage compartment cover.
When you open or close the rear hatch, the supporting straps, when attached, will automatically raise
or lower the luggage compartment cover.
You can put light articles of clothing on the luggage compartment cover. But remember that your view
through the rear window must not be obstructed.
Removing the luggage compartment cover

Unhook the supporting straps from the rear hatch fig. 100 (top arrows).
Pull the luggage compartment cover back and out of the side brackets (bottom arrows).
Installing the luggage compartment cover

Slide the luggage compartment cover forward into the side brackets (bottom arrows).
Hook the supporting straps onto the rear hatch (top arrows).
WARNING
In a sudden braking or other maneuver, or in a collision, unsecured or improperly secured
objects or animals on the luggage compartment cover could cause serious injury.
Never leave hard, heavy or sharp objects in bags or loose on the luggage compartment
cover.
Never let animals ride on the luggage compartment cover.
NOTICE
To help prevent damage to the luggage compartment cover, the luggage compartment may
only be loaded to a height at which the luggage compartment cover will not press on the cargo
when the rear hatch is closed.
Things on the luggage compartment cover can damage it.
The defroster heating wires or antenna in the rear window can be damaged by objects that
rub against them.
Do not cover the ventilation slots in the side consoles. Otherwise, stale air cannot escape from
the vehicle.
Luggage compartment pass-through
Fig. 101 In the rear backrest: Opening the luggage compartment pass-through.
There is a pass-through for transporting things like skis in the rear seat backrest behind the center
armrest.
To help prevent soiling the vehicle interior, cover dirty items before sliding them into the pass-through.
If the center armrest is folded down, no one can sit on the middle seat of the rear bench.
Opening the pass-through

Open the rear hatch.
Push the head restraint for the center seat all the way down Adjusting the seating position.
Pull the loop in the direction of the arrow fig. 101 and fold down center armrest.
Remove the cushion
Slide long objects from the luggage compartment through the pass-through.
Secure objects with the safety belt.
Close the rear hatch.
Closing the pass-through

Open the rear hatch.
Unfasten the items secured with the safety belt.
Remove items from the luggage compartment through the pass-through.
Fold the center armrest back until it engages securely.
Reinstall the cushion
The pass-through can also be opened from the luggage compartment. Push down the release
button (arrow) and push the center section of the rear seat backrest (pass-through) all the way
forward.
Tie-downs
Fig. 102 In the luggage compartment: Tie-downs.
There are 4 tie-downs in the front and rear of the luggage compartment, which you can use to secure
luggage or other items fig. 102 (arrows).
Elastic straps can snap back towards you if they are not properly attached.
If you use elastic straps to secure items in the luggage compartment, be sure to fist securely attach
them to the tie-downs just behind the rear seat backrest first and then to the and then to the tie-downs
at the loading edge of the luggage compartment.
Remove the hooks from the tie-downs in the reverse order described above, first from the tie-downs at
the loading edge and then from the tie-downs behind the rear seat backrest so that if the hooks come
loose suddenly, they will move away from you.
WARNING
Unsuitable, worn, or damaged tie-down straps (elastic or non-elastic) can snap or come loose
during braking or other maneuvers or in a collision. Objects secured with these straps can
then come loose and fly through the passenger compartment, causing severe personal
injuries or death.
To help prevent baggage or other items from coming loose and flying around, always use
suitable undamaged tie-down straps.
Securely fasten the tie-down straps to the tie-downs.
Loose or improperly secured objects in the luggage compartment can slide about
suddenly and change the vehicle's handling.
Secure even small and light objects. Loose objects in the luggage or passenger
compartment can fly about during sudden braking maneuvers or in the event of an accident
and injure occupants.
Never exceed the maximum allowable load on the tie-downs when securing objects.
Never secure a child seat to the tie-downs.
WARNING
Elastic straps have to be stretched when being attached to the tie-downs in the luggage
compartment Hooks on elastic straps can cause serious personal injury if not handled
properly and attached securely.
Always protect eyes and face from injury from the hooks when attaching them to the
vehicle and do not let them snap back and hit you.
Always hold the hooks on elastic straps firmly when attaching to the vehicle and do not let
them snap back and hit you.
First attach hooks on the straps to the tie-downs at the rear seat backrest in the luggage
compartment and then to the tie-downs near the loading edge of the luggage compartment.
This way, if one of the hooks on the elastic straps snaps back, it will move away from you,
decreasing the risk of personal injury.
The maximum load for the tie-downs is about 785 lbs. (356 kg).
For suitable ratchet straps and luggage stowage systems, please see an authorized Volkswagen
Shopping bag hooks
Fig. 103 In the luggage compartment: Shopping bag hooks.
A pull-down shopping bag hook in the upper left part of the luggage compartment can be used for
conveniently holding light shopping bags.
Press at the bottom to fold out the shopping bag hook fig. 103.
Press at the top to fold out the shopping bag eye .
WARNING
Never use the shopping bag hooks as tie-downs. The hooks could break off during sudden
breaking maneuvers or in a collision.
NOTICE
The maximum load for the shopping bag hook is 6.6 lbs. (3 kg).
Applicable only in the United States

Luggage net
Fig. 104 In the luggage compartment: Luggage net hooked in place.
The luggage net helps prevent lighter luggage from shifting. The luggage net also has a pocket that
can hold smaller items.
There are several ways to install the luggage net in the luggage compartment.
Example 1: Securing the luggage net flat on the luggage compartment floor
First secure the luggage net hooks to the tie-downs at the rear seat backrest fig. 104 . The
luggage net pocket opening must face upwards.
Secure the luggage net hooks to the tie-downs at the loading edge of the luggage compartment .
Example 2: Securing the luggage net to the loading edge

First attach the loops to the shopping bag hooks.
Then secure the short luggage net hooks to the tie-downs at the loading edge of the luggage
compartment . The luggage net pocket opening must face upwards.
Removing the luggage net
The installed luggage net is stretched tight .

Remove the hooks and loops of the luggage net from the tie-downs in the reverse order described
above so that if the hooks come loose suddenly, they will move away from you.
Stow the luggage net in the luggage compartment.
WARNING
The elastic luggage net has to be stretched when being attached to the tie-downs in the
luggage compartment. The hooks can cause serious personal injury if not handled properly
and attached securely.
Always hold the hooks on the luggage net bag firmly when attaching to the vehicle and do
not let them spring back and hit you.
Always protect eyes and face from injury from the metal hooks when attaching them to the
tie-downs in the luggage compartment.
First attach the luggage net bag hooks to the tie-downs on the rear seat backrest or on the
shopping bag hooks in the luggage compartment and then to the tie-downs near the loading
edge of the luggage compartment. If one of the hooks on the luggage bag net snaps back, it
will move away from you and not towards you, increasing the risk of injury.
Variable luggage compartment floor
Fig. 105 In the luggage compartment: Opening and securing the variable luggage compartment floor.
Fig. 106 Extending the luggage compartment floor forward or downward.
Opening and closing the luggage compartment floor

To open, fold out handle in the direction of the arrow and raise the luggage compartment floor
completely fig. 105.
To secure, push the retaining pin to the right.
To close, push the retaining pin (1) to the left and guide the luggage compartment floor
downwards.
Extending the luggage compartment floor forward

Remove the luggage compartment cover Luggage compartment cover.
Remove the rear head restraints Adjusting the seating position.
Push both sections of the rear seat forward Adjusting the seating position.
Fold the rear backrests forward Adjusting the seating position.
Fold the cover forward fig. 106 (1).
Extending the luggage compartment floor downward

Remove the luggage compartment cover Luggage compartment cover.
Raise the luggage compartment floor, pull from the side pins (2) and remove it from the vehicle to
the rear.
There may be a foam element with the spare wheel fig. 105 located beneath the variable luggage
compartment floor. If a spare wheel is present, remove it Compact spare wheel and remove the
foam element from the luggage compartment.
WARNING
During hard braking or an accident, loose objects can fly through the passenger
compartment and cause serious or even fatal injuries.
Even if the luggage compartment floor panel is properly raised, it is still necessary to
secure all objects.
Objects stowed between the rear seat bench and the luggage compartment floor panel
must never be more than 2/3 as high as the raised floor panel.
Objects stowed between the rear seat bench and the raised luggage compartment floor
panel must never weigh more than about 16.5 lbs. (7.5 kg).
NOTICE
Do not let the luggage compartment floor fall freely when closing it. Always guide it down into
place. The trim or the luggage compartment floor could be damaged.
If you slide the rear seats forward, there is a gap between the luggage compartment floor and the
rear seats. Make certain there are no objects in this space before sliding the rear seats back again.
Roof rack
Introduction
Attaching the roof rack base carrier and roof rack
Securing a load on the roof rack
The roof of your vehicle has been designed to optimize aerodynamics and does not have traditional
rain gutters that are used to attach many kinds of roof racks.
Since the rain gutters are molded into the roof to provide efficient aerodynamics, only Volkswagen-
approved base carrier mounts and roof racks can be used.
When should the roof rack be removed?

When it is no longer needed.
Before driving through an automatic car wash.
When the vehicle would otherwise be too high for minimum clearance to enter, for example, a
garage.
More information:
Lights
Transporting
Tires and wheels
WARNING
Transporting heavy or bulky loads on the roof rack will change the way the vehicle handles
by shifting the vehicle's center of gravity and increasing the wind drag.
Always secure the load properly with suitable and undamaged straps so that the load will
not shift.
Cargo that is large, heavy, bulky, long or flat will have a negative effect on the vehicle's
aerodynamics, center of gravity and overall handling.
Always avoid sudden maneuvers and hard braking.
NOTICE
Always remove the roof rack before driving through an automatic car wash.
Your vehicle is higher when the roof rack is installed, especially when it is loaded. Compare
the vehicle height with existing clearance heights, such as underpasses and garage doors.
Always make sure that the roof rack system and anything being carried on it does not
interfere with the roof antenna or the movement of the power sunroof or the rear hatch.
Make sure that the rear hatch does not touch items on the roof rack when opened.
If a roof rack is installed, fuel consumption increases due to increased air resistance.
Attaching the roof rack base carrier and roof rack
Fig. 107 Vehicles without roof railing: Attachment points for the base carrier and roof rack.
Fig. 108 Vehicles with roof railing: Attachment points for the base carrier and roof rack.
The base carrier is the basis of a complete roof carrier system. For safety reasons, additional
attachments are necessary for transporting luggage, bicycles, surfboards, skis and small boats.
Suitable accessories can be purchased from your authorized Volkswagen dealer or authorized
Vehicles without roof railing: Mounting the base carrier and roof rack
Always attach the base carrier and roof rack correctly.
Always carefully follow the installation instructions from the base carrier or roof rack manufacturer.
The mounting holes are on the underside of the roof frame and are only visible when the door is open
fig. 107.
Only mount the roof rack base carrier at the holes shown in the illustration.
Vehicles with roof railing: Mounting the roof rack
Typical roof racks cannot be attached to the roof railing. Only roof racks which have been approved by
Volkswagen may be used.
Always carefully follow the installation instructions from the roof rack manufacturer.
The attachment holes are on the inside of the roof railing fig. 108 (magnified view).
Only mount the roof rack base carrier at the holes shown in the illustration.
WARNING
Installing or using a base carrier or roof rack improperly can cause the entire system to fly off
the vehicle, causing accidents and injuries.
Always follow the installation instructions provided by the manufacturer.
Use the base carrier and roof rack only if they are undamaged and properly installed.
Mount the roof rack base carrier only at the markings shown in the illustration fig. 107
or fig. 108.
Always install the base carrier and roof rack properly.
Make sure that all bolts and fasteners are properly installed and properly tightened before
every trip and retighten them as needed after driving a short distance. During a long trip,
check all bolts and fasteners at each stop.
Always properly install special fixtures for items such as bicycles, skis, surfboards, etc.
Do not modify or repair the base carrier or roof rack.
Follow the installation instructions provided for installing the roof rack system. Always carry them
in the vehicle.
Securing a load on the roof rack

It is not possible to secure a load unless the roof rack system has been properly installed .
Maximum permissible roof load

The maximum permissible roof load for vehicles without a roof railing is 165 lbs. (75 kg) and for
vehicles with a roof railing, 220 lbs. (100 kg). The roof load is the combined weight of the roof rack
and the items being carried on the roof .
Be sure you know the weight of the roof rack and the items you want to transport on the roof. Weigh
them if necessary. Never carry a total of more than the maximum permissible roof load.
When using a roof rack with a lower load limit, do not load the rack to the maximum weight mentioned
above. In this case, you may only load the roof rack to the weight limit specified in the system's
installation instructions.
Distributing the load
Distribute the load evenly and secure it properly .
Checking the mountings

After the base carrier and rook rack have been installed, check all bolts and fasteners after driving a
short time and at regular intervals thereafter.
WARNING
If the maximum permissible roof load is exceeded, accidents and substantial vehicle damage
may occur.
Never exceed the specified roof load, the maximum gross axle weight rating, or the gross
vehicle weight rating.
Do not exceed the loading capacity of the roof rack, even if the permissible roof load is
not fully utilized.
Always make sure that loads are evenly distributed and that heavier items are, as far as
possible, toward the front.
WARNING
Loose or improperly secured loads can be thrown from the roof rack and cause accidents
and injuries.
Always use suitable, undamaged tie-down ropes and ratchet straps.
Secure the load properly.
Trailer towing
Introduction
Technical requirements
Hitching up and connecting a trailer
Loading the trailer
Driving with a trailer
Ball mount
Retrofitting a trailer hitch
Maximum permissible trailer weight
Obey country-specific requirements about trailer towing and trailer hitches.

Your Volkswagen was mainly designed for carrying passengers. If you plan to tow a trailer, please
remember your vehicle will be performing a job for which it was not primarily intended. The additional
load will affect durability, handling, fuel economy, and performance, and may require the vehicle to be
serviced more often.
Trailer towing not only places more stress on the vehicle, it calls for more concentration from the
driver. Always follow the operating and driving instructions given, and use common sense.
Under winter conditions, install winter tires on the vehicle and the trailer.
Tongue weight
The maximum permissible trailer tongue weight exerted on the ball mount should not exceed 220 lbs
(100 kg).
More information:
Lights
Braking and parking
Tires and wheels
WARNING
Riding in a trailer is dangerous and may be illegal.
WARNING
Improper use of the trailer hitch can cause accidents and injuries. An improperly installed,
incorrect, or damaged trailer hitch can cause the trailer to separate from the towing vehicle
and cause serious personal injuries.
Only use an undamaged, properly mounted trailer hitch.
Never repair or modify the trailer hitch.
To reduce the risk of injury in rear-end collisions, and the risk to pedestrians and cyclists
when the vehicle is parked, always remove the ball mount when you are not towing a trailer.
Never install a weight distributing or load equalizing trailer hitch on your vehicle. The
vehicle was not designed for these kinds of trailer hitches. The trailer hitch attachment can
fail, causing the trailer to tear loose from the vehicle.
WARNING
Improper trailer towing can cause loss of vehicle control and serious personal injury.
Driving with a trailer and carrying heavy or large things can change the way the vehicle
handles, increase the distance it needs to stop safely, and cause accidents.
Always secure the load properly with suitable and undamaged straps so that the load will
not shift.
Reduce your speed even more than you otherwise would when going downhill and under
unfavorable load, weather, or wind conditions.
Trailers with a high center of gravity tip more easily than trailers with a low center of
gravity.
Always avoid sudden maneuvers and hard braking.
Be especially careful when passing other vehicles.
Reduce speed immediately if the trailer shows the slightest sign of swaying.
Never try to stop the swaying by accelerating.
Always obey speed limits. In some areas, the speed limits for vehicles towing trailers are
lower than for vehicles without trailers. Never drive faster than 50 mph (80 km/h; under
exceptional circumstances 60 mph - 100 km/h) when towing a trailer. This applies even if the
local speed limit is higher.
If you are driving a new vehicle or a vehicle with a new or rebuilt engine, do not tow a trailer
during the break-in period, about 600 miles (1000 km)
If you tow a trailer, your vehicle may need maintenance more often because of the extra load it
has to move.
When you are not towing, remove the trailer hitch ball. This helps keep the trailer hitch from
causing damage to your vehicle and to others if your vehicle is hit from behind.
Some models need a trailer hitch to tow or tow-start other vehicles. You may want to always
carry the ball mount in the vehicle after it has been removed. Be sure to stow it securely.
Technical requirements
Use only a weight-carrying trailer hitch designed and approved for the gross weight of the trailer you
want to tow. The trailer hitch must be suitable for your vehicle and trailer and must be securely bolted
to the appropriate place on the vehicle chassis. Use only a trailer hitch with a removable ball mount.
Always check with the trailer hitch manufacturer to make sure that you are using the correct trailer
hitch and carefully follow the hitch manufacturer's instructions. Never install a weight distributing or
load equalizing trailer hitch on your vehicle. The vehicle is not designed for this kind of trailer hitch
.
Your authorized Volkswagen dealer or authorized Volkswagen Service Facility has the genuine
Volkswagen hitch receiver, ball mount and electrical kit that has been specifically approved for your
vehicle.
Do not use a bumper-mounted trailer hitch

Never install a trailer hitch on the bumper or on the bumper attachments. The trailer hitch must not
interfere with the impact-absorbing bumper system. Do not make any changes to the vehicle exhaust
and brake systems. From time to time, check that all trailer hitch mounting bolts are securely fastened.
When you are not towing, remove the trailer hitch. This helps keep the trailer hitch from causing
damage if your vehicle is hit from behind.
Engine cooling system

Towing a trailer makes the engine and its cooling system work harder. It is important that the engine
cooling system is up to the job. Make sure that the cooling system has enough coolant.
Trailer brakes
If your trailer has its own brakes, make sure it meets all regulations. The trailer brake system must
never be directly connected to the vehicle's brake system.
Safety chains
Always use safety chains between your vehicle and the trailer Hitching up and connecting a trailer.
Trailer taillights
Trailer lights must meet all regulations Hitching up and connecting a trailer.
Never connect the trailer lights directly to the electrical system of your vehicle. Be sure to check with
your authorized Volkswagen dealer or authorized Volkswagen Service Facility about correct wiring,
switches and relays.
Outside mirrors
If you cannot see the traffic behind you using the regular outside mirrors, then you must install
extended mirrors. Extended mirrors may also be required by law in some countries/states/provinces.
Always adjust the outside mirrors before driving. It's vital that you always have a clear view to the rear
of the vehicle.
Maximum power consumption for the trailer

Do not exceed the power ratings listed in the chart below.
Electrical load Maximum power
Taillights total 108 watts
Turn signals per side 54 watts

Electrical load Maximum power
Side marker lights total4 100 watts
Taillights lights total 54 watts
WARNING
An improperly installed or incorrect trailer hitch can cause a trailer to separate from the
tow vehicle and cause serious personal injuries.
If you don't have to tow a trailer any more, remove the entire trailer hitch. Always seal all
bolt holes to prevent water and deadly exhaust fumes from getting into the vehicle.
NOTICE
If the trailer lights are not connected properly, the vehicle's electronics may be damaged.
If the trailer uses too much electricity, the vehicle's electronics may be damaged.
Never connect the electrical system for the trailer directly to the electrical connections for
the rear lights or to any other unsuitable power sources. Use only a suitable connector to
provide power to the trailer.
If you tow a trailer frequently, Volkswagen recommends having the vehicle serviced between the
regular maintenance and inspection intervals because of the extra load it has to pull.
In some countries an additional fire extinguisher must be carried if the total weight of the trailer
exceeds 5,512 lbs. (2,500 kg).
Hitching up and connecting a trailer

Safety chains
Always make sure that the safety chains are properly attached to the towing vehicle. Leave enough
slack in the chains so that you can go around corners without stretching the chains. The safety chains
must not drag on the ground, however.
Trailer electrical socket

The vehicle may be optionally equipped with a setup for connecting a trailer socket. The electrical
connection between the towing vehicle and the trailer is a conventional 7-pin trailer socket.
Trailer taillights
Make sure that the trailer lights work properly and meet legal requirements. Do not exceed the
maximum power consumption for the trailer Maximum power consumption for the trailer.
4
Side marker lights may be located on the side of the vehicle body, in the headlight assembly, or in the
taillight assembly.
WARNING
Improper connections to the vehicle electrical system can cause malfunctions that affect the
entire vehicle electrical system, which can lead to accidents and serious personal injury.
Have any work on the electrical system done by an authorized Volkswagen dealer or
Never connect the electrical system for the trailer directly to the electrical connections for
the rear lights or to any other unsuitable power sources. Use only a suitable connector to
provide power to the trailer.
NOTICE
Never attach a trailer to the vehicle or leave it attached to the vehicle when the trailer is
supported by a trailer jack or blocks. Various things (such as a change in trailer or vehicle load
or a flat tire) can lower or raise the vehicle. This subjects the trailer hitch and the trailer to
strong forces that can damage the vehicle or the trailer.
Any problems with the vehicle's electrical system when attached to a trailer should be checked
by an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
If the engine is switched off and accessories in the trailer are on and use electricity from the
vehicle, the vehicle battery will be drained as long as the electrical systems of the vehicle and the
trailer are connected.
Loading the trailer

Maximum permissible trailer weight and tongue weight
Maximum permissible trailer weight is the load that the vehicle can tow . The tongue load or
tongue weight is the load pressing down on the trailer hitch ball mount Ball mount.
The maximum permissible trailer weight and tongue weight for your vehicle are listed on in this
Manual.
The trailer load and tongue weight on the type identification plate for the trailer hitch are only test
values. The vehicle-specific figures are often lower than these values. In some countries, but generally
not in the United States, the vehicle-specific figures are listed in the official vehicle documents.
Specifications in official vehicle documents always take precedence.
To help ensure optimum handling and driving safety, Volkswagen recommends always using the
maximum permissible tongue weight. If the tongue weight is too low, the vehicle and trailer will not
handle as well.
Tongue weight increases the load on the rear axle and, in turn, reduces the remaining load your
vehicle can carry Maximum permissible trailer weight.
Combined towing weight

Combined towing weight is the weight of the loaded towing vehicle plus the weight of the loaded
trailer.
This vehicle has not been designed to tow a Class II trailer and must never be retrofitted to tow a
Class II trailer. Always make sure that your vehicle has been designed to tow the trailer you want to
use and that it is legal to tow the trailer where you will be driving.
Loading the trailer

The weight distribution in the vehicle and trailer must be balanced. Use the maximum permissible
tongue weight and make sure that the load in the trailer is evenly distributed and that it is not front-
heavy or tail-heavy:
Distribute the load in the trailer so that heavy objects are directly above the axle or as close as
possible to the axle.
Secure loads properly on the trailer.
Tire pressure
Always follow the trailer manufacturer's tire pressure recommendations for the trailer tires.
When towing, inflate the towing vehicle's tires to the maximum permissible pressure listed on the tire
pressure label Tires and wheels.
WARNING
Exceeding the gross weight ratings for axle, tongue, vehicle, trailer or combined weight can
cause accidents and serious personal injury.
Never exceed the specified values.
Never let the actual weights at the front and rear axles exceed the Gross Axle Weight
Rating. Never let the combined front and rear weights exceed the Gross Vehicle Weight
Rating.
WARNING
Trailer loads that are not properly secured can shift when the vehicle is moving or braking
and suddenly change the way the vehicle handles, causing accidents and severe injuries.
Always load the trailer properly.
Always secure the load properly with suitable, undamaged straps that can be tightened so
that the load cannot shift.
Driving with a trailer

Headlight settings
Towing a trailer can raise the front end of the vehicle enough for the low beams to blind other road
users. If your vehicle does not have headlight range adjustment, have the headlights adjusted by an
authorized Volkswagen dealer or authorized Volkswagen Service Facility. Vehicles with Xenon
headlights self-adjust to vehicle load and do not need manual adjustment.
Special towing considerations

If the trailer has an overrun brake, apply the brakes gently at first and then firmly. This helps to
prevent sudden brake shock and helps prevent trailer wheels from locking up.
Due to the combined towing weight including the higher gross vehicle weight, the stopping distance
is longer.
Before driving downhill, especially on hills that are long or steep, shift into a lower gear (manual or
automatic transmission) so that the engine helps to brake the vehicle. Otherwise, the brake system
could overheat and might fail.
The vehicle's center of gravity and, in turn, the vehicle's handling, will change because of the trailer
load and the increased combined towing weight of the vehicle and trailer.
Weight distribution is especially bad if the towing vehicle is empty and the trailer is loaded. If you
absolutely must drive with this combination, drive with extra care and at a reduced speed.
Starting off with a trailer on hills

Depending on how steep the hill is and the combined towing weight, a parked vehicle with trailer can
roll backwards when you first start moving.
When starting off with a trailer on a hill:
Depress and hold the brake pedal (and depress and hold the clutch - manual transmission).
Shift into first gear or drive position (D) Braking and parking.
Press the button once to deactivate the electronic parking brake Braking and parking.
Pull and hold the button to hold the vehicle and trailer with the electronic parking brake
Braking and parking.
At the same time, release the brake pedal and gradually depress the accelerator and, for manual
transmission, let out the clutch until you can feel the car moving forward. Do not release the button
until the engine starts to move the vehicle forward. If your vehicle has an automatic transmission, you
can also depress and hold the brake pedal for added braking and then let up on the brake pedal when
you feel that the vehicle wants to move forward.
Drive ahead slowly.
WARNING
Improper trailer towing can cause loss of vehicle control and serious personal injury.
Driving with a trailer and carrying heavy or bulky items changes the way the vehicle
handles and increases the distance it needs to stop safely.
Always watch what is happening up ahead and around you. Brake earlier than you would
if you were not towing a trailer.
Reduce your speed even more than you otherwise would when going downhill and under
unfavorable load, weather, or wind conditions.
Drive especially carefully and accelerate gently. Always avoid sudden maneuvers and
hard braking.
Be especially careful when passing other vehicles.
Reduce speed immediately if the trailer shows even the slightest sign of swaying.
Never try to stop the swaying by accelerating.
Always obey speed limits. In some areas speed limits for vehicles towing trailers are lower
than for vehicles without trailers.
Ball mount
Fig. 109 Dimensions of the ball mount support.
If you must tow a trailer, you must have the necessary electrical wiring and socket together with a
suitable trailer hitch installed. Because towing a trailer places a great deal of stress on the vehicle, the
attachment of a trailer to the vehicle and the dimensions of the receiver and ball mount are very
important so that the extra forces the vehicle has to withstand can be properly handled.
Depending on its equipment, certain parts required for the installation of a trailer hitch may already
have been installed at the factory. If your vehicle does not already have the preparation package
installed, your authorized Volkswagen dealer or authorized Volkswagen Service facility can install the
necessary parts and equipment including the proper trailer hitch for you.
The receiver used requires both a ball mount and a ball that meet special requirements regarding
geometry and size. This applies to both the height of the ball above the surface where it attaches
fig. 109 (A), and the pin-to-ball distance (B).
These dimensions are important because they help determine the way that the forces that arise during
towing are applied to the receiver and its attachments to the vehicle. If you buy a ball mount and ball,
make sure that they meet the following specifications.
Ball mount dimensions

The drop height (A) from the center of the ball to the center of the hole for the securing pin on the
ball mount must be at least 1 inch (25.4 mm) and at most 27 /8 inches (73 mm).
The pin-to-ball distance (B) from the center of the ball to the center of the hole for the securing pin
on the ball mount must be no more than 7 inches (178 mm).
The ball diameter must be no more than 2 inches (51 mm).
Volkswagen recommends that you have an authorized Volkswagen dealer or authorized Volkswagen
Service Facility install the hitch receiver, electrical system and socket.
A ball mount and ball combination that does not meet these specifications can damage your vehicle
and may even fail in use .
Never install a weight distributing or load equalizing trailer hitch on your vehicle. The vehicle is not
designed for this kind of trailer hitch .
WARNING
An improperly installed or unsuitable trailer hitch can cause the trailer to separate from the
towing vehicle and result in a major accident with serious personal injuries.
Have any trailer hitch retrofit or other work on a trailer hitch done by a qualified workshop.
CAUTION
The ball mount sticks out behind the rear bumper and can cause injury to pedestrians and
cyclists.
To reduce the risk of injury in rear-end collisions, and the risk to pedestrians and cyclists
when the vehicle is parked, always remove the ball carrier when you are not towing a trailer.
NOTICE
Never use a hitch ball larger than 2 inches (51 mm) on your vehicle. The vehicle was not
designed to tow heavier trailers with a receivers larger than the specified ball. The increased
loads can damage the attachment points for the trailer hitch.
Never use an adapter to increase the size of the trailer hitch receiver from 2 inches to a
larger size to tow a trailer that is heavier than the maximum permissible trailer weight that your
vehicle can tow.
You can use an adapter if required for the proper installation of a bicycle rack or other
similar carrier as long as the maximum weight limits are observed. When using bicycle racks
or similar carriers, make sure that the rear lights are not blocked.
Only use trailer hitches that are approved by the hitch manufacturer for your vehicle and
model.
Retrofitting a trailer hitch
Fig. 110 Dimensions and attachment points for retrofitting a trailer hitch.
Volkswagen recommends having the trailer hitch retrofit performed by a qualified workshop because
cooling system modifications or the installation of heat shields may be necessary. Volkswagen
recommends that you see an authorized Volkswagen dealer or an authorized Volkswagen Service
Facility before having a hitch installed on your vehicle.
When retrofitting a trailer hitch, the specified distance dimensions must be strictly adhered to. Under
no circumstances may the distance from the center of the hitch ball to the surface of the road
fig. 110 (F) be less than the specified minimum. This minimum height must be present even when
the vehicle is fully loaded and subject to the maximum tongue weight.
Distance dimensions :
(A) Attachment points
(B) 38 inch (966 mm)
(C) 237 /10 inch (602 mm)
(D) at least 14 inch (355 mm)
(E) 214 /25 inch (min. 65 mm)
(F) from 134 /5 inch to 161 /2 inch (350 - 420 mm)
(G) 412 /5 inch (1051 mm)
WARNING
Improper or incorrect connections to the vehicle electrical system can cause malfunctions
that affect the entire vehicle electrical system and cause accidents and serious personal
injury.
Never connect the electrical system of the trailer directly to the electrical connections of
the rear lights or other unsuitable power sources. Use only a suitable connector to provide
power to the trailer.
Have any trailer hitch retrofit or other work on a trailer hitch done by a qualified workshop.
WARNING
An improperly installed or unsuitable trailer hitch can cause the trailer to separate from the
towing vehicle and result in a major accident with serious personal injuries.
Only use trailer hitches that are approved by Volkswagen for your vehicle and model.
Maximum permissible trailer weight

Maximum permissible trailer weights lbs. kg
Trailer with brake 2200 998
Trailer without brake 1650 748
Tongue weight 220 100
The Gross Vehicle Weight Rating and the Gross Axle Weight Rating must not be exceeded, even with
a trailer. These ratings are listed on the safety compliance label on the left front door jamb 33. When
a trailer is towed, the weight of the ball mount and the tongue weight of the trailer are added to the
vehicle weight Determining the correct load limit.
The trailer weight ratings given above are valid only up to altitudes of 3000 ft (1000 m) above sea
level. The maximum permissible combined towing weight must be reduced by about 10% for every
3000 ft (1000 m), or portion thereof, of additional altitude.
WARNING
Exceeding the gross trailer weight rating and tongue weight can cause accidents and serious
personal injury.
Never let the actual weights at the front and rear axles exceed the Gross Axle Weight
Rating (GAWR). Never let the combined front and rear weights exceed the Gross Vehicle
Weight Rating (GVWR).
NOTICE
Exceeding the gross weight ratings can cause extensive vehicle damage that is not covered by
any Volkswagen Limited Warranty.
Tires and wheels
Introduction
Tire and wheel handling
Wheel rims
New and replacement tires
Tire inflation pressure
Tire inflation pressure in cold tires
Tread depth and tread wear indicators
Tire wear and damage
Compact spare wheel
Tire labeling
Winter tires
Snow chains
Glossary of tire and loading terminology
Tires and vehicle load limits
Determining the correct load limit
UTQG classification
Volkswagen recommends that all work on tires and wheels be done by an authorized Volkswagen
dealer or authorized Volkswagen Service Facility. They are familiar with the technical requirements
and recommended procedures, have the necessary special tools and spare parts, and can properly
dispose of old tires.
More information:
Transporting
Trailer towing
Tire Pressure Monitoring System
Braking and parking
Vehicle tool kit
Wheel covers
Changing a wheel
WARNING
New tires or tires that are old, worn or damaged cannot provide maximum control and
braking performance.
Improper care and handling of tires and wheels can reduce driving safety and cause
accidents and severe injuries.
Install only radial tires of the same make, the same dimensions (tread circumference), and
similar tread profile on all 4 wheels.
New tires tend to be slippery and must be broken in. Always drive with special care for the
first 350 miles (560 km) to help reduce the risk of losing control, a collision, and serious
personal injuries.
Check tire inflation pressure regularly when the tires are cold and always maintain the
prescribed tire pressure. Low tire pressure can cause tires to get too hot, resulting in tread
separation, sudden loss of pressure, and blowouts. Tires with excessively low pressure flex
(bend) more, which can cause the tire to overheat and fail suddenly without warning.
Check tires regularly for wear and damage.
Never drive with worn or damaged tires (for example, tires with punctures, cuts, cracks,
blisters, or bumps). Driving with worn or damaged tires can lead to loss of vehicle control,
sudden tire failure including blowouts and sudden deflation, crashes, and serious personal
injuries.
Have worn or damaged tires replaced immediately.
Never exceed the maximum speed rating or the maximum load rating of the tires on your
vehicle.
The effectiveness of the driver assistance systems and the braking support systems
depends on the tire traction.
If you notice unusual vibration or if the vehicle pulls to one side when driving, always stop
as soon as it is safe to do so and check the wheels and tires for damage.
To reduce the risk of losing control, crashes, and serious personal injuries, never loosen
the bolts on wheels with bolted rim rings.
Never mount used tires on your vehicle if you are not sure of their past use. Old, used
tires and wheels may have damage that cannot be seen that can lead to sudden tire failure
and loss of vehicle control.
Tires age even if they are not being used and can fail suddenly, especially at high speeds,
causing loss of vehicle control, accidents, and severe personal injuries. Tires that are more
than 6 years old can be used only in an emergency and even then only with special care and
at low speed.
For technical reasons it is usually not possible to use wheel rims from other vehicles. Even wheel
rims from the same model may not fit properly. Check with an authorized Volkswagen dealer or
authorized Volkswagen Service Facility if necessary.
Tire and wheel handling
Fig. 111 Tire rotation diagram.
Tires may be the least appreciated and most abused parts of a motor vehicle. Tires are very important,
since their small patches of rubber are the only contact between your vehicle and the road.
Maintaining correct tire pressure, making sure that your vehicle and its tires do not have to carry more
weight than they can safely handle, and regularly inspecting tires for damage (such as cuts, slashes,
irregular wear, and overall condition) are the most important things that you can do to help avoid
sudden tire failure, including tread separation and blowout.
The tires and wheels are essential parts of the vehicle's design. The tires and wheels approved by
Volkswagen are specially matched to the characteristics of the vehicle for good road holding and safe
handling when in good condition and properly inflated.
Avoiding tire damage

If you must drive over a curb or other obstacle, drive very slowly and as much as possible at a right
angle to the curb with the tire tread of both front wheels contacting the curb at the same time.
Regularly check tires for damage, such as punctures, cuts, tears and blisters.
Remove embedded material in the tread profile that has not yet penetrated the inside of the tire
Tire wear and damage.
Heed all warning messages from the Tire Pressure Monitoring System (TPMS) Tire Pressure
Monitoring System (TPMS).
Replace worn or damaged tires immediately Tire wear and damage.
Damage to tires and wheels is often not readily visible. If you notice unusual vibration or the
vehicle pulls to one side, this may indicate that one of the tires is damaged. The tires must be checked
immediately for hidden damage by an authorized Volkswagen dealer or an authorized Volkswagen
Service Facility. See also Tire wear and damage.
Never exceed the load and permissible maximum speed rating of the tires Tire labeling.
Always keep aggressive chemicals including grease, oil, gasoline and brake fluid off the tires,
including the compact spare tire .
Replace missing valve caps immediately.
Unidirectional tires
Unidirectional tires are designed to rotate only in one direction. Unidirectional tires have arrows on the
sidewalls that show the direction of rotation Tire labeling. Unidirectional tires must always be
mounted according to the specified direction of rotation in order to deliver their best grip, braking
performance, low road noise, and good wear as well as good hydroplaning resistance.
If you have to mount a tire opposite to its proper direction of rotation, you must drive more carefully,
since the tire is no longer being used as designed. This is particularly important on wet roads. You
must replace or remount the tire as soon as possible in order to restore the correct direction of
rotation.
Rotating tires
To help ensure even wear on all tires, regular tire rotation according to the diagram fig. 111 is
recommended. In this way all tires can have about the same service life.
Volkswagen recommends that you have your tires rotated by an authorized Volkswagen dealer or
Tires more than 6 years old

Tires age even if they are not being used. Physical and chemical processes reduce tire strength and
performance and cause them to harden and become brittle. Old tires can fail suddenly and without
warning.
Volkswagen recommends replacing tires that are 6 years and older. This also applies to tires that look
new (including the tire on the compact spare wheel) or that seem to still be usable with tread depth
that has not yet reached the legal minimum depth .
The age of each tire can be determined with the manufacturing date that is part of the U.S. DOT tire
identification number (TIN) Tire labeling.
Tire storage
Mark tires before removing them to help make sure that the previous location (left, right, front, rear)
and rolling direction can be maintained when remounting them. Store tires in a cool, dry and preferably
dark place. Do not store tires mounted on wheels standing up.
Tires not mounted on wheels should be covered to help protect them from dirt and stored vertically
(sitting on the tread).
WARNING
Aggressive fluids and materials can cause visible and invisible tire damage that can cause
tire blowouts.
Always keep chemicals, oils, grease, fuels, braking fluids and other aggressive
substances away from tires.
WARNING
Tires age even if they are not being used and can fail suddenly, especially at high speeds,
causing loss of vehicle control, accidents, and severe personal injuries.
Tires that are more than 6 years old can be used only in an emergency and even then only
with special care and at low speed.
Always dispose of old tires in accordance with legal requirements.
Wheel rims
The design of wheel bolts is matched to the factory-installed wheels. If different wheels are installed,
wheel bolts with the right length and bolt head shape must be used. This helps to ensure that wheels
can be mounted securely and that the brakes will work correctly Changing a wheel.
In most cases, you cannot use wheel bolts from a different vehicle. Even wheel rims from the same
model may not fit properly.
Tires and wheel rims approved by Volkswagen have been matched precisely to your vehicle model
and contribute considerably to good handling and safe vehicle performance.
Tightening Torque
Wheel bolts must always be installed with the correct tightening torque Changing a wheel. The
required tightening torque for your vehicle's wheel bolts is 103 ft lbs (140 Nm) for front-wheel drive
vehicles and 88 ft lbs (120 Nm) for vehicles with four-wheel drive (4MOTION). After changing a
wheel, the bolt torque must be checked as soon as possible with an accurate torque wrench. See an
authorized Volkswagen dealer or authorized Volkswagen Service Facility.
Wheel rims with bolted rim rings

Wheel rims with bolted rim rings have several parts. The parts are bolted together with special screws
in a special process. This helps to ensure that they will work properly, prevent leaks, run true and
safely. Damaged wheel rims must be replaced, and you must never take them apart or try to repair
them yourself. Have an authorized Volkswagen dealer or an authorized Volkswagen Service Facility
repair them for you .
Wheel rims with bolted decorative covers

Light-alloy wheels may have interchangeable decorative covers attached to the rim with self-locking
screws. If you want to replace damaged wheel covers, contact your authorized Volkswagen dealer or
authorized Volkswagen Service Facility .
WARNING
Using improper or damaged wheel rims can affect driving safety, cause accidents and severe
personal injuries.
Use only wheel rims approved for the vehicle.
Regularly check wheel rims for damage and replace them if necessary.
WARNING
Improper loosening and tightening of the bolts on wheel rims with bolted rim rings can cause
accidents and severe personal injury.
Never loosen bolted connections on wheel rims with bolted rim rings.
Have all work on wheel rims with bolted rim rings performed by an authorized Volkswagen
New and replacement tires

New tires
Drive a vehicle with new tires especially carefully for the first 350 miles (560 km) because the tires
must first be broken in. Tires that are not broken in have reduced traction and braking
performance .
Install only radial tires only of the same make, same dimensions (tread circumference), and similar
tread profile on all 4 wheels.
The tread depth of new tires can differ between tire models and manufacturers because of different
design features and tread design.
Replacing tires
Tires should be replaced in pairs and not individually (both front tires or both rear tires at the same
time) .
Replace tires only with tires that have the same specifications, including width and diameter, load
and top speed rating as the tires approved by Volkswagen for your vehicle and model.
Never use tires that are larger or wider than the dimensions of the tires approved by Volkswagen
for your vehicle and model. Larger tires could scrape and rub on the vehicle body or other parts of the
vehicle.
Tire Pressure Monitoring System (TPMS) considerations

The Tire Pressure Monitoring System must be recalibrated in the appropriate menu in the MFI
whenever you remove and remount or change any wheel or tire on the vehicle, even if the reinstalled
or replacement wheels and tires are identical to those that were removed and even if the tire pressure
does not change Tire Pressure Monitoring System (TPMS).
WARNING
New tires tend to be slippery and must be broken in.
Always drive with special care for the first 350 miles (560 km) to help reduce the risk of
losing control, a collision, and serious personal injuries.
WARNING
Tires must have the required clearance. Tires that do not have enough clearance can rub
against parts of the vehicle body, suspension, and brake system, causing brake system
failure, tread delamination, and sudden blowouts.
Always make sure that new tires are not larger than the tires approved for your vehicle
and that the new tires do not rub against parts of the vehicle.
NOTICE
When switching to different tires, make certain the valves are not damaged.
Never drive without valve stem caps. The valves could be damaged.
Always dispose of old tires in accordance with legal requirements.
If the replacement wheel is different from the tires that you have mounted on your vehicle (for
example winter tires or wider, low-profile tires, or a compact spare), then use the replacement wheel
for a short time only, and drive cautiously.
Replace it with a tire matching the others on your vehicle as soon as possible.
Although tire size specifications can be the same, the actual dimensions may differ from those
nominal values for different tire makes, or the tire contours may be significantly different.
Tire inflation pressure
Fig. 112 Location of the tire inflation pressure label.
The correct tire inflation pressure for the factory-installed tires is listed on a label. The factory-installed
tires may be summer, winter, or all-season tires. The label fig. 112 is on the driver door jamb.
Under- or over-inflation significantly shortens the service life of your tires and affects the handling of
the vehicle . The correct tire pressure is very important, particularly when the vehicle is driven at
higher speeds. Incorrect tire pressure causes increased wear and even sudden tire failure and
blowouts.
Therefore, tire pressure should be checked at least once a month and always before long trips.
The specified tire inflation pressure applies to a cold tires. When tires are warm, the pressure will be
higher than when the tires are cold.
Do not reduce the tire pressure on warm tires to match the required cold tire inflation pressure. The
tire inflation pressure would then be too low and could cause sudden tire failure and blowout.
Checking tire inflation pressure

Always check the tire pressure only on cold tires when the vehicle has not been driven more than a
couple of miles (kilometers) at low speed within the last 3 hours.
Check tire inflation pressure regularly and on cold tires. Check all the tires, including the compact
spare, if any. In colder climates tire pressure should be checked more often, but only when the tires
are cold. Always use an accurate tire pressure gauge.
After adjusting the tire inflation pressures, make sure to screw the valve caps back on; replace
missing valve caps immediately. Please read and heed the information on resetting the Tire Pressure
Monitoring System, if necessary Tire Pressure Monitoring System (TPMS).
Remember that the vehicle manufacturer, not the tire manufacturer, determines the correct tire
pressure for the tires on your vehicle. Never exceed the maximum inflation pressure listed on the tire
sidewall for any reason.
Inflate the spare wheel to the pressure specified for the vehicle's road wheels on the tire pressure
label; inflate a compact spare wheel to the pressure specified for the compact spare on the tire
pressure label or on a separate label for the compact spare, if there is one.
WARNING
Incorrect tire pressure can cause a sudden tire failure or blowout, loss of control, collision,
serious personal injury, and even death.
Always inflate tires to the recommended and correct cold tire pressure before driving off.
Low tire pressure can cause tires to get too hot, resulting in tread separation, sudden loss
of pressure, and blowouts. Tires with excessively low pressure flex (bend) more, which can
cause the tire to overheat and fail suddenly without warning.
Excessive speed and/or overloading can cause heat buildup, sudden tire failure including
a blowout and sudden deflation and loss of control.
If the tire pressure is too low or too high, the tires will wear prematurely and the vehicle
will not handle well.
Regularly check tire inflation pressure, at least once a month, and also especially before a
long trip.
Check the pressure in all four tires when the tires are still cold. Never reduce air pressure
in warm tires to match cold tire inflation pressure.
NOTICE
Make sure not to jam the tire pressure gauge into the valve stem. Otherwise you can
damage the tire valves.
Driving without valve caps, with the wrong valve caps, or with valve caps that are not
properly screwed on can damage the tire valves and the sensors on the Tire Pressure
Monitoring System. To help prevent damage, always use valve stem caps like those originally
installed at the factory. The caps must be screwed on tightly. Do not use metal valve caps or
comfort valve stem caps.
Underinflation increases fuel consumption.
Pressures measured with a gauge when inflating the tires may be different from the pressures
read by the tire pressure sensors. The electronic TPMS is more accurate.
When the TPMS warns that the pressure in at least one tire is too low, check the tire pressure in
all 4 tires with an accurate tire pressure gauge. Low tire pressure usually cannot be spotted by looking
at the tire. This is especially true for low-profile tires. When checking the tire pressures, refer to Tire
Pressure Monitoring System (TPMS).
Tire inflation pressure in cold tires

Drive train Tire dimensions Tire pressures
psi kPa bar
Front-wheel drive 215/65 R16 35 240 2.4

Drive train Tire dimensions Tire pressures
psi kPa bar
235/55 R17 35 240 2.4
235/50 R18 35 240 2.4
255/40 R19 38 260 2.6
T145/80 R185 61 415 4.1
215/65 R16 38 260 2.6
235/55 R17 38 260 2.6
Four-wheel drive (4MOTION) 235/50 R18 38 260 2.6
255/40 R19 41 280 2.8
T145/80 R185 61 415 4.1
xl = reinforced sidewall.
The Tire Pressure Monitoring System is configured at the factory with the correct tire inflation
pressure applicable for the vehicle model, engine and factory-installed tires. The tire inflation
pressure is listed on the tire inflation pressure label on the driver door jamb 170. The tire inflation
pressures for the road tires are listed on this label. The inflation pressure for the compact spare is as
specified on the tire pressure label or on a separate label for the compact spare, if there is one. In
the event of a discrepancy between the above figures and the tire pressures listed on the tire
inflation pressure label, the pressures listed on the label are the ones you should use. The Tire
Pressure Monitoring System must be recalibrated in the appropriate menu in the MFI whenever you
remove and remount or change any wheel or tire on the vehicle, even if the reinstalled or
replacement wheels and tires are identical to those that were removed and even if the tire pressure
does not change.
5
Compact spare wheel
Tread depth and tread wear indicators
Fig. 113 Tread pattern: Wear indicator.
Tread depth
Most driving situations require as much tread depth as possible and similar tread depth for the tires on
the front and rear wheels. This is especially true when driving in winter weather, at low temperatures
and under wet conditions .
In most countries the legally permissible minimum tread depth is 1/16 in. (1.6 mm), as measured in
tread grooves next to the wear indicators. Please be sure to obey country-specific legal requirements.
Winter tires are no longer suitable for winter operation once the tread pattern is worn down to a depth
of 3/16 in. (4.8 mm).
The tread depth of new tires can differ between tire models and manufacturers because of the
different design features and tread patterns.
Tread wear indicator (TWI) in the tire

The 1/16 in. (1.6 mm) high wear indicators are molded into the bottom of the tread grooves of the
original tires running across the treads fig. 113. Several wear indicators are evenly spaced around
the tire. Markings on the sides of the tires (for example TWI or symbols) show the position of the
wear indicators.
Wear indicators show when the tires are worn down. The tires must be replaced no later than when
the tread pattern is worn down to the wear indicators.
WARNING
Worn tires are dangerous and can cause loss of vehicle control including serious personal
injuries.
Never drive a vehicle when the tread on any tire is worn down to the wear indicators,
replace them sooner.
Worn tires do not grip the road properly, especially on wet roads, increasing your risk of
hydroplaning and loss of control.
Worn tires reduce the ability of your vehicle to handle well in normal and difficult driving
situations and increase braking distances and the risk of skidding.
Tire wear and damage

Wheel rim and tire damage is often difficult to see. Unusual vibrations or pulling to one-side can be
an indication of tire damage .
If you suspect tire damage, immediately reduce speed!
Check tires and wheel rims for damage.
If a tire is damaged, do not drive any farther. Get expert assistance.
If no external damage is visible, slowly and carefully drive to the nearest authorized Volkswagen
dealer or authorized Volkswagen Service Facility or other qualified workshop and have the vehicle
checked.
Objects embedded in the tire

If embedded objects have penetrated to the inside of the tire, do not remove them! If objects are
stuck in the tread grooves of the tire, they can be removed.
With a spare wheel or compact spare wheel: If necessary, change the damaged wheel
Changing a wheel. If necessary, get professional assistance to change the wheel.
Check tire pressure and adjust if necessary.
Tire wear
Tire wear depends on several factors, including:
Driving style.
Unbalanced wheels.
Wheel alignment.
Driving style - Fast cornering, hard acceleration and braking increase tire wear. If you experience
increased tire wear under normal driving conditions, have the vehicle suspension checked by an
Unbalanced wheels - The wheels on a new vehicle are balanced. When driving, however, various
conditions can cause a wheel to become unbalanced. Unbalanced wheels can cause wear to the
steering and suspension systems. Have all wheels rebalanced. A wheel must always be rebalanced if
a new tire has been mounted.
Wheel alignment - Incorrect wheel alignment causes excessive and uneven tire wear, impairing
vehicle safety. If you notice excessive or uneven tire wear, have the wheel alignment checked by an
WARNING
Unusual vibrations or pulling to one side can indicate tire damage.
Reduce speed immediately and stop when it is safe to do so.
Check tires and wheel rims for damage.
Never drive with a damaged tire or rim. Get expert assistance instead.
If no external damage is visible, slowly and carefully drive to the nearest authorized
Volkswagen dealer or authorized Volkswagen Service Facility or other qualified workshop
and have the vehicle checked.
Compact spare wheel
Fig. 114 In the luggage compartment: Compact spare wheel.
Fig. 115 In the luggage compartment: Held in place with a retainer.
Removing the compact spare wheel

Open the rear hatch, raise the entire luggage compartment floor, press the retaining pin fig. 114
(1) to the right and slowly lower the luggage compartment floor.
If applicable: Remove the Fender premium audio subwoofer Removing Fender Premium Audio
subwoofer.
Completely unscrew the threaded retainer in the center of the compact spare wheel (2)
counterclockwise and remove the compact spare wheel .
Stowing the replaced wheel

One of the vehicles normal wheels will not fit in the well for the compact spare wheel in the floor of the
luggage compartment. Therefore, in the event of a flat tire, the wheel which was changed must be
secured, for example, with suitable straps in the luggage compartment.
Open the rear hatch, raise the entire luggage compartment floor, press the retaining pin (1) to the right
and slowly lower the luggage compartment floor.
Put the wheel you took off the vehicle into the spare wheel well so that the center hole of the rim is
aligned with the threaded pin.
Turn the threaded retainer in the center of the compact spare wheel (2) clockwise until the wheel
replaced is securely in place.
If necessary, return the vehicle tool kit to its location in the luggage compartment.
Raise the floor covering and release the retaining pin, then fold the floor covering back down onto the
floor of the luggage compartment.
Differences between the road tires and the compact spare

The compact spare is different in design from the road tires and must be used only in the event of a
flat tire, only for a brief time, and only when driving with extra caution .
Replace it with a tire matching the others on your vehicle as soon as possible.
Please heed the following:
Do not drive faster than 50 mph (80 km/h)!
Avoid full-throttle acceleration, hard braking and fast cornering!
Do not use snow chains on the compact spare wheel Snow chains.
After installing the compact spare tire, check the tire pressure as soon as possible Tire inflation
pressure.
Check the tire inflation pressure of the compact spare whenever you check the tire pressure of the
road wheels, at least once a month. Inflate a compact spare tire to the cold tire pressure specified for
the compact spare on the tire pressure label or on a separate label for the compact spare, if there is
one.
WARNING
Improper use of a compact spare tire can cause loss of vehicle control, a crash or other
accident, and serious personal injury.
Never use a compact spare tire if it is damaged or worn down to the wear indicators.
In some vehicles, the compact spare tire is smaller than the original tire. A smaller
compact spare tire is identified with a sticker and the words 50 mph or 80 km/h. This is
the maximum permissible speed when driving with this tire.
Never drive faster than 50 mph (80 km/h) with a compact spare tire. Avoid full-throttle
acceleration, heavy braking, and fast cornering!
Never drive more than 125 miles (200 km) if a compact spare wheel is installed on the front
axle (drive axle).
Replace the compact spare with a normal wheel and tire as soon as possible. Compact
spare tires are designed for brief use only.
Regularly check the U.S. DOT Tire Identification Number (TIN) to determine the age of the
compact spare tire Tire labeling. Tires age even if they are not being used and can fail
suddenly, especially at higher speeds.
Tires age even if they are not being used and can fail suddenly, especially at higher
speeds.
Tires that are more than 6 years old can only be used in an emergency and then with
special care and at low speeds.
The compact spare tire must always be secured with the wheel bolts provided by the
factory.
Never drive using more than one compact spare wheel.
After installing the compact spare tire, the tire pressure must be checked as soon as
possible Tire inflation pressure.
Snow chains cannot be used on the compact wheel tire. If you must use snow chains and
have a compact spare wheel mounted, move the compact spare tire to the rear axle if a front
tire has to be replaced. The tire taken off the rear axle can then be used to replace the flat
front tire. Be sure you do not change the tire's direction of rotation. Install the snow chains
on the full-sized road tire.
NOTICE
When the spare wheel or compact spare is being used, the TPMS indicator light can start
flashing after about 10 minutes.
If possible, attach the compact spare tire or the tire you took off the vehicle securely in the
Tire labeling
Fig. 116 International tire labeling.
Knowing about tire specifications makes it easier to choose the correct replacement tires. Radial tires
have specifications marked on the sidewall.
Tire labeling (example) Meaning
Brand, Logo Manufacturer
Tire name Individual tire designation of the manufacturer.
P255/55 R 18 Dimensions:
P Tire application: Passenger car
255 Nominal sidewall-to-sidewall width of tire in millimeters.
55 Ratio of height to width (aspect ratio)
R Tire belt design letter code for radial.
18 Rim diameter (in inches)
95 H Load rating code and speed rating code

XL Indicates reinforced tire (heavy-duty)
M+S or M/S or Indicates Mud and Snow capability (also M/S)
SSR or DSST, Eufonia, RFT, Manufacturer-dependent labeling for run-flat tires.

ROF, RSC, ZP
RADIAL TUBELESS Tubeless radial tire.
E4 ... Labeling according to international regulations (E) including

number of the approving country. The multi-digit approval number
is listed next.
DOT BT RA TY5 1709 Tire identification number (TIN6 in some cases only on one side
of the tire and the manufacturing date:
DOT The tire complies with the requirements of the United

States Department of Transportation, responsible for
issuing safety standards.
BT Identification letter of the manufacturing site.
RA Manufacturer information regarding tire dimensions.
TY5 Tire characteristics provided by the manufacturer.
1709 Manufacturing date: 17th week in 2009.
TWI Marks the position of the tread wear indicator
Made in Germany Country of manufacture.
MAX LOAD 615 KG (1356 LBS) United States maximum load rating per wheel.
MAX INFLATION 350 KPA United States maximum permissible inflation pressure.
(51 PSI)
SIDEWALL 1 PLY RAYON Tire ply composition and materials used:

1 layer of rayon.
TREAD 4 PLIES Tire tread composition and materials used:

1 RAYON + 2 STEEL + In this example there are 4 layers under the tread: 1 layer of
1 NYLON rayon, 2 layers of steel belt and 1 layer of nylon.
Consumer information regarding comparison to specified base tires (standardized test

procedure) 189:
6
TIN represents the serial number of the tire.
TREADWEAR 280 Relative service life expectancy of the tire referenced to a US-
specific standard test.
TRACTION AA Traction rating under wet conditions (AA, A, B or C).
TEMPERATURE A Temperature stability of the tire at increased test bench speeds

(A, B or C).
Additional numbers found on the tire could either be tire manufacturer internal labels or
country-specific labels (e.g. for Brazil and China).
Unidirectional tires
Unidirectional tires are designed to rotate only in one direction. Unidirectional tires have arrows on the
sidewalls that show the direction of rotation. Make sure you mount the tire so that it rotates in the
proper direction. The tire's performance with regard to hydroplaning, traction, noise, and wear is worse
if it is not mounted in the proper direction of rotation.
If you have to mount a tire opposite to its proper direction of rotation, you must drive more carefully,
since the tire is no longer being used as designed. This is particularly important on wet roads. You
must replace or remount the tire as soon as possible in order to restore the correct direction of
rotation.
Load rating code

The load index indicates the maximum permissible load per individual tire in pounds (kilograms).
91 1356 lbs (615 kg)
93 1433 lbs (650 kg)
95 1521 lbs (690 kg)
97 1609 lbs (730 kg)
98 1653 lbs (750 kg)
99 1709 lbs (775 kg)
100 1763 lbs (800 kg)
101 1819 Ibs (825 kg)
102 1874 lbs (850 kg)
103 1929 lbs (875 kg)
104 1984 lbs (900 kg)
110 2337 lbs (1060 kg)
Speed rating code letter

The speed rating code letter indicates the maximum permissible road speed of the tires.
P up to 93 mph (150 km/h)
Q up to 99 mph (160 km/h)
R up to 105 mph (170 km/h)
S up to 111 mph (180 km/h)
T up to 118 mph (190 km/h)
U up to 124 mph (200 km/h)
H up to 130 mph (210 km/h)
V up to 149 mph (240 km/h)
Z over 149 mph (240 km/h)
W up to 167 mph (270 km/h)
Y up to 186 mph (300 km/h)
Some tire manufacturers label tires with a maximum permissible road speed above 149 mph
(240 km/h) with the letter combination ZR.
WARNING
Using incorrect or unmatched tires and/or wheels or improper tire and wheel combinations
can lead to loss of control, collision and serious personal injury.
Always use tires, wheels and wheel bolts that meet the specifications of the original
factory-installed tires or other combinations that have been specifically approved by the
vehicle manufacturer.
All 4 wheels must be fitted with radial tires of the same type, the same size (tread
circumference), and the same tread pattern. Driving with different tires reduces vehicle
handling and can lead to a loss of control.
Never drive faster than the maximum speed for which the tires installed on your vehicle
are rated because tires that are driven faster than their rated speed can fail suddenly.
Overloading tires can cause heat buildup, sudden tire failure, including a blowout and
sudden deflation and loss of control.
Temperature grades apply to tires that are properly inflated and not over- or underinflated.
Winter tires
Winter tires improve the handling characteristics of your vehicle significantly when driving under wintry
road conditions. Summer tires have less traction on snow and ice because of their design (width,
rubber composition, tread design). Volkswagen strongly recommends that you always have winter
tires or all-season tires installed on all 4 wheels on your vehicle, especially when winter road
conditions are expected. Winter tires also improve the vehicle's braking performance and help reduce
stopping distances during winter weather. Volkswagen recommends installing winter tires once
temperatures are below +45 F (+7 C).
Winter tires are no longer suitable for winter driving once the tread pattern is worn down to a depth of
3/16 in (4.8 mm). In addition, winter tire performance decreases with age - independent of the tread
profile depth.
When using winter tires:

Obey state and country-specific legal requirements.
Install winter tires on all 4 wheels.
Use snow tires only under wintry road conditions.
Only use winter snow tires with dimensions approved for the vehicle.
Use only winter tires of the same tire belt design, the same dimensions (tread circumference), and
the same tread design.
Follow speed restrictions according to the winter tire's speed rating code letter .
Speed restrictions
Winter tires are certified up to a top speed identified by speed rating code letters on the side wall
Tire labeling.
In some vehicle models it is possible to set a speed warning in the MFI menu in the instrument cluster
display (Multi-Function Indicator - MFI) Volkswagen Information System.
Top speed rating and tire inflation pressure for V winter tires depend on the engine installed in your
vehicle. Be sure to ask you authorized Volkswagen dealer or authorized Volkswagen Service Facility
about the maximum permissible speed and the required tire inflation pressure for the winter tires that
you plan to use.
All-wheel drive (4MOTION)

Vehicles with all-wheel drive and standard road wheels have good forward motion and traction even
under wintery road conditions. However, Volkswagen recommends installing winter tires or all season
tires on all 4 wheels to improve handling as well as braking performance.
If you use snow chains, please read and heed information and directions
WARNING
Driving faster than the maximum speed for which the winter tires on your vehicle were
designed can cause sudden tire failure including a blowout and sudden deflation, loss of
control, crashes and serious personal injuries.
Winter tires have a maximum speed rating that may be lower than your vehicle's maximum
speed.
Never drive faster than the maximum speed for which the winter tires installed on your
vehicle are rated because tires that are driven faster than their rated speed can fail suddenly.
Never exceed the maximum load rating for the winter tires installed on your vehicle.
Install summer tires promptly in the spring. Summer tires offer better handling characteristics for
temperatures above +45 F (+7 C). They are quieter, do not wear as quickly, and reduce fuel
consumption.
The Tire Pressure Monitoring System must be recalibrated using the appropriate menu in the MFI
whenever you remove and remount or change any wheel or tire on the vehicle, even if the reinstalled
or replacement wheels and tires are identical to those that were removed and even if the tire pressure
does not change
If necessary, ask your authorized Volkswagen dealer or authorized Volkswagen Service Facility
about permissible winter tire dimensions.
Snow chains
Obey local regulations as well as the applicable speed limits when driving with snow chains.
Snow chains improve forward motion, traction and braking characteristics under wintry conditions.
Snow chains may be used only on the front wheels when driving on roads and highways. This
applies even to all-wheel drive vehicles (4MOTION). Snow chains may be used only in the
following tire and wheel rim combinations:
Tire dimensions Rim
215/65 R16 6 1/2 J x 16 ET 33
215/60 R17 6 1/2 J x 17 ET 33
Please contact your authorized Volkswagen dealer or authorized Volkswagen Service Facility about
appropriate wheel, tire and snow chain dimensions.
If possible, use only chains with low profile links that are not thicker than 37/64 in (15 mm) including
the tensioner.
Remove hubcaps and decorative rim rings before installing snow chains . However, for safety
reasons, caps must be installed on the wheel bolts. These are available from authorized Volkswagen
dealers and authorized Volkswagen Service Facilities.
Compact spare
For technical reasons, snow chains cannot be used on the compact spare
If you must use snow chains and have a compact spare tire mounted, move the compact spare wheel
to the rear axle if a front tire has to be replaced. The tire taken off the rear axle can then be used to
replace the flat front tire. Be sure to install the unidirectional tires so that they will run in the proper
direction. Volkswagen recommends installing the snow chains before mounting the wheel to the
vehicle.
WARNING
Using the wrong snow chains or installing snow chains improperly can cause accidents and
severe personal injuries.
Always use the proper snow chains.
Follow the installation instructions provided by the snow chain manufacturer.
Never exceed the permissible speed limit when driving with snow chains.
NOTICE
Remove snow chains when roads are free of snow. Otherwise, the chains can damage the
tires, impair vehicle handling and can be quickly worn down.
Snow chains can scratch or damage wheel rims, if they have direct contact with the rims.
Volkswagen recommends using coated snow chains.
Snow chains are available in different sizes for each vehicle model.
Glossary of tire and loading terminology

Accessory weight
The combined weight (in excess of those standard items which may be replaced) of automatic
transmission, electro-mechanical power steering, power brakes, power windows, power seats, radio,
and heater, to the extent that these items are available as factory-installed equipment (whether
installed or not).
Aspect ratio
The ratio of sidewall height to tire width, expressed as a percentage. A number of 70 (0.7:1 or 70%) or
lower indicates a low-profile tire with a shorter sidewall for improved steering response and better
overall handling on dry pavement.
Bead
The part of a tire made of steel wires, wrapped or reinforced by ply cords, with the shape and structure
to ensure proper fit to the wheel rim.
Bead separation
A breakdown of the bond between components in the bead.
Carcass
The tire structure, except tread and sidewall rubber which, when inflated, bears the load.
Chunking
The breaking away of pieces of the tread or sidewall.
Cord
The strands of material forming the plies in the tire.
Cord Separation
The parting of cords from adjacent rubber compounds.
Cracking
Any parting within the tread, sidewall, or inner liner of the tire extending to cord material.
Cold tire inflation pressure

The tire pressure recommended by the vehicle manufacturer for a tire of a specified size that has not
been driven for more than a couple of miles (kilometers) at low speeds in the 3 hour period before the
tire pressure is measured or adjusted.
Curb weight
The weight of a motor vehicle with standard equipment including the maximum capacity of fuel, oil,
and coolant, air conditioner, and additional weight of optional equipment.
Extra load tire

A tire designed to operate at higher loads and at higher inflation pressures than the corresponding
standard tire.
Gross Axle Weight Rating (GAWR)

The load-carrying capacity of a single axle system, measured where the tire contacts the ground.
Gross Vehicle Weight Rating (GVWR)

The maximum loaded weight of the vehicle.
Groove
The space between 2 adjacent tread ribs.
Load rating (code)

The maximum load that a tire is rated to carry for a given inflation pressure. You may not find this
information on all tires because it is not required by law.
Maximum load rating
The load rating for a tire at the maximum permissible inflation pressure for that tire.
Maximum loaded vehicle weight

The total of:
Curb weight.
Accessory weight.
Vehicle capacity weight.
Production options weight.
Maximum (permissible) inflation pressure

The maximum cold inflation pressure to which a tire may be inflated. Also called maximum inflation
pressure.
Normal occupant weight

Means 150 lbs (68 kilograms) times the number of occupants seated in the vehicle up to the total
seating capacity of your vehicle.
Occupant distribution
The placement of passengers in a vehicle.
Outer diameter
The diameter of a new, properly inflated tire.
Overall width
Total width measured at the exterior sidewalls of an inflated tire, including the additional width of
labeling, decorations, or protective bands or ribs.
Passenger car tire

A tire intended for use on passenger cars, multipurpose passenger vehicles, and trucks, that have a
gross vehicle weight rating (GVWR) of 10,000 pounds or less.
Ply
A layer of rubber-coated parallel cords. A parting of rubber compound between adjacent plies.
Ply separation
A parting of rubber compound between adjacent plies.
Pneumatic tire
A mechanical device made of rubber, chemicals, fabric, and steel or other materials, that, when
mounted on an automotive wheel, provides the traction and contains the gas or fluid that sustains the
load.
Production options weight

The combined weight of installed regular production options weighing over 5 lbs (2.3 kg) more then the
standard items they replace, and not previously considered as curb weight or accessory weight. These
include, for example, heavy-duty brakes, ride levelers, heavy-duty battery, and special trim.
Radial ply tires

A pneumatic tire in which the ply cords that extend to the beads are laid at substantially 90 degrees to
the centerline of the tread.
Recommended inflation pressure
The tire pressure recommended by the vehicle manufacturer for a tire of a specified size that has not
been driven for more than a couple of miles (kilometers) at low speeds in the 3 hour period before the
tire pressure is measured or adjusted.
Reinforced tire
A tire designed to operate at higher loads and at higher inflation pressures than the corresponding
standard tire.
Rim
The outer edge of a wheel upon which the tire beads are seated.
Rim diameter
The nominal diameter of the wheel's tire bead seating surface. If you change your wheel size, to
wheels of a different diameter, you will have to purchase new tires to match the new wheels.
Rim size
Designation means rim diameter and width.
Rim type designation

The industry or manufacturer's designation for a rim by style or code.
Rim width
The nominal distance between wheel rim flanges.
Section width
The linear distance between the exteriors of the sidewalls of an inflated tire, excluding elevations due
to labeling decoration, or protective bands.
Sidewall
The portion of a tire between the bead and the tread.
Sidewall separation
The parting of the rubber compound from the cord material in the sidewall.
Speed rating (letter code)

A standardized letter code indicating the maximum speed at which a tire is designed to be driven for
extended periods of time. The ratings range from 93 mph or 150 km/h (P) to 186 mph or (300 km/h)
Y.
The speed rating letter code, where applicable, is molded on the tire sidewall Speed rating code
letter. You may not find this information on all tires because it is not required by law.

A system that detects when at least one of a vehicle's tires is underinflated and illuminates a low tire-
pressure warning light.
Tread
The portion of a tire that normally touches the road.
Tread rib
A tread section running circumferentially around a tire.
Tread separation
Tire failure caused by the tread pulling away from the tire carcass.
Tread wear indicators (TWI)
Raised areas within the main tread grooves that show, visually, when tires are worn and near the end
of their useful life Tread depth and tread wear indicators.
Uniform Tire Quality Grading (UTQG)

A tire information system developed by the U.S. National Highway Traffic Safety Administration
(NHTSA) that is designed to help buyers compare tires. UTQG is not a safety rating, nor is it a
guarantee that a tire will last for a certain number of miles or perform a certain way. It gives tire buyers
more information to compare with factors such as price, brand loyalty and dealer recommendations.
Under UTQG, tires are graded by the tire manufacturers in 3 areas: tread wear, traction and
temperature resistance. UTQG information is molded into the tire sidewalls.
U.S. DOT Tire Identification Number (TIN)

A tire's serial number. It begins with the letters DOT (Department of Transportation) and indicates
that the tire meets all federal standards. The next 2 numbers or letters indicate the plant where the tire
was manufactured. The last 4 numbers represent the week and year of manufacture.
For example, the numbers 1801 mean that the tire was produced in the 18th week of 2001. Any other
numbers are marketing codes used by the tire manufacturer. This information is used to help identify
affected consumers if a tire defect requires a recall.
Vehicle capacity weight

The total rated cargo, luggage and passenger load. Passenger load is 150 lbs (68 kilograms) times the
vehicle's total seating capacity (as listed on the label inside the driver door).
Vehicle maximum load on the tire

The load on an individual tire that is determined by taking each axle's share of the maximum loaded
vehicle weight (GAWR) and dividing by 2.
Vehicle normal load on the tire

The load on an individual tire that is determined by taking each axle's share of the curb weight,
accessory weight, and normal occupant weight (distributed according to the table below) and dividing
by 2.
Wheel size designation

Wheel rim diameter and width.
Occupant loading and distribution for vehicle normal load for various designated seating
capacities
Designated seating capacity, Vehicle normal load, number Occupant distribution in a

number of occupants of occupants normally loaded vehicle
2,3 or 4 2 2 in front
5 3 2 in front, 1 in back
Tires and vehicle load limits

There are limits to the load any vehicle or any tire can carry. A vehicle that is overloaded will not
handle well and is more difficult to stop. Overloading can damage important parts of the vehicle.
Overloading can also lead to blowout, sudden loss of pressure or other tire failure that can cause loss
of control.
Your safety and the safety of your passengers depends on making sure that load limits are not
exceeded. Vehicle load includes everybody and everything in and on the vehicle. These load limits are
technically referred to as the vehicle's Gross Vehicle Weight Rating (GVWR).
The GVWR includes the weight of the basic vehicle, all factory-installed and other accessories, a full
tank of fuel, oil, coolant and other fluids plus maximum load. The maximum load includes the number
of passengers that the vehicle is intended to carry (seating capacity) with an assumed weight of
150 lbs (68 kg) for each passenger at a designated seating position and the total weight of any
luggage in the vehicle. If you tow a trailer, the weight of the trailer hitch and the tongue weight of the
loaded trailer must be included as part of the vehicle weight. At altitudes above 3000 ft (1000 m),
combined towing weight (vehicle plus trailer) must be reduced by 10 % for every 3000 ft (1000 m).
The Gross Axle Weight Rating (GAWR) is the maximum load that can be carried at each of the
vehicle's 2 axles (by the front or rear tires). GVWR and GAWR are listed on the safety compliance
label on the driver door jamb. Your vehicle has 5 total seating positions: 2 in the front and 3 in back.
Each seating position has a safety belt. Because there is an upper limit to your vehicle's total weight
(GVWR), the weight of whatever is being carried (including the weight of a trailer hitch and the tongue
weight of the loaded trailer) is also limited. More passengers, or passengers who are heavier than the
assumed 150 lbs (68 kg), mean that less weight can be carried as luggage or other cargo. The tire
pressure label on your Volkswagen also lists the maximum combined weight of all of the occupants
and luggage or other cargo that the vehicle can carry.
WARNING
Overloading a vehicle can cause loss of vehicle control, a crash or other accident, serious
personal injury, and even death.
Carrying more weight than your vehicle was designed to carry will prevent the vehicle
from handling properly and increase the risk of the loss of vehicle control.
The brakes on a vehicle that has been overloaded may not be able to stop the vehicle in a
safe distance.
Tires on a vehicle that has been overloaded can fail suddenly, including a blowout and
sudden deflation, causing loss of control and a crash.
Always make sure that the total load being transported - including the weight of a trailer
hitch and the tongue weight of a loaded trailer - does not make the vehicle heavier than the
vehicle's Gross Vehicle Weight Rating.
Determining the correct load limit

Never overload tires. The following example illustrates how to determine the combined weight of all
vehicle occupants and luggage or other vehicle payloads. Never overload the vehicle!
Steps for Determining Correct Load Limit:
1. Locate the statement THE COMBINED WEIGHT OF OCCUPANTS AND CARGO SHOULD
NEVER EXCEED XXX KG OR XXX LBS on your vehicle's placard (tire inflation pressure
label)
2. Determine the combined weight of the driver and passengers that will be riding in your
vehicle.
Steps for Determining Correct Load Limit:
3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.
4. The resulting figure equals the available amount of cargo and luggage load capacity.
For example, if the XXX amount equals 1400 lbs and there will be five 150 lbs passengers
in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400-750
(5 x 150) = 650 lbs).
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That
weight may not safely exceed the available cargo and luggage load capacity calculated in
Step 4.
6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
Consult this Manual to determine how this reduces the available cargo and luggage capacity
of your vehicle.
Check the tire sidewall to determine the load index specified for the tire.
UTQG classification
Uniform Tire Quality Grading (UTQG): Quality grades can be found where applicable on the tire
sidewall between the tread shoulder and maximum section width. Example:
Treadwear (number)
Traction: AA, A, B or C
Temperature: A, B or C
For example: Treadwear 200, Traction AA Temperature A
All passenger car tires must conform to Federal Safety Requirements in addition to these grades.
Treadwear
The tread wear grade is a comparative rating based on the wear rate of the tire when tested under
controlled conditions on a specified government test course.
For example, a tire graded 150 (Tread wear-value 150) would wear one-and-one-half (1 1/2) times as
well on the government course as a tire graded 100.
The relative performance of tires depends upon the actual conditions of their use, however, and may
depart significantly from the norm due to variations in driving habits, service practices and differences
in road characteristics and climate.
Traction
The traction grades from highest to lowest, are AA, A, B and C. Those grades represent the tire's
ability to stop on wet pavement as measured under controlled conditions on specified government test
surfaces of asphalt and concrete. A tire marked C may have poor traction performance .
Temperature
The temperature grades are A (the highest), B, and C representing the tire's resistance to the
generation of heat, and its ability to dissipate heat when tested under controlled conditions on a
specified indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and
excessive temperature can lead to sudden tire failure.
The grade C corresponds to a level of performance which all passenger car tires must meet under the
Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of
performance on the laboratory test wheel than the minimum required by law .
WARNING
The traction grade assigned to this tire is based on straight-ahead braking traction tests, and
does not include acceleration, cornering, hydroplaning or peak traction characteristics.
WARNING
The temperature grade for this tire is established for a tire that is properly inflated and not
overloaded. Excessive speed, underinflation or excessive loading, either separately or in
combination, can cause heat buildup and possible tire failure.
Tire Pressure Monitoring System (TPMS)
Introduction
Indicator light (telltale)
Tire Pressure Monitoring System and recalibration with the MFI
Your vehicle's Tire Pressure Monitoring System (TPMS) uses the Anti-lock Brake System (ABS)
sensors to indirectly check the tire pressure of all four tires while you are driving. The sensors monitor
the tread circumference (rolling circumference) and vibration characteristics of the individual tires.
TPMS warns if there is a significant loss of pressure in one or more tires while the vehicle is moving.
Pressure loss is signaled by the indicator light (described below) as well as by acoustic warnings
and text warnings in the instrument cluster display if your vehicle has this display (Multi-Function
Indicator - MFI).
The original benchmark pressure is the recommended maximum load cold tire inflation pressure for
the tires that come with your vehicle. This pressure is listed on the tire pressure label on the driver
door jamb 170. After adjusting the tire pressures in all 4 tires, you can confirm the new cold inflation
pressures by storing them in the appropriate menu in the MFI and change the benchmark pressure to
match the current pressure of the tires on your vehicle.
Recalibrating the TPMS to reset the benchmark cold tire inflation pressure is explained below
More information:
Transporting
Tires and wheels
Braking and parking

Accessories, replacement parts, repairs and changes
WARNING
Incorrect tire pressures and/or underinflation can cause sudden tire failure, loss of control,
collision, serious personal injury or even death.
When the warning symbol appears in the instrument cluster, stop and inspect the tires.
Incorrect tire pressure and/or underinflation can cause increased tire wear and can affect
the handling of the vehicle and stopping ability.
Incorrect tire pressures and/or underinflation can also lead to sudden tire failure,
including a blowout and sudden deflation, causing loss of vehicle control.
The driver is responsible for the correct tire pressures for all tires on the vehicle. The
recommended tire pressure values are listed on a sticker inside the driver door 170.
The TPMS can only work correctly when all tires on the vehicle are filled to the correct
cold tire inflation pressure.
Using incorrect tire pressure values can cause accidents or other damage. Always inflate
the tires to the correct specified cold tire pressure values for the tires installed on the vehicle.
Always maintain correct cold tire inflation pressure so that TPMS can do its job.
Always inflate tires to the recommended and correct tire pressure before driving off.
Driving with underinflated tires causes them to flex (bend) more, letting them get too hot,
resulting in tread separation, sudden tire failure, and loss of control.
Excessive speed and/overloading can cause heat buildup, sudden tire failure and loss of
control.
If the tire is not flat and you do not have to change a wheel immediately, drive carefully
and at reduced speed to the nearest service station to check the tire pressure and add air as
required.
When replacing tires or wheel rims on vehicles equipped with TPMS always read and heed
the information and all WARNINGS regarding Tires and wheels
The Tire Pressure Monitoring System must be recalibrated using the MFI whenever you
replacement wheels and tires are identical to those that were removed and even if the tire
pressure does not change
WARNING
Improper use of the MFI reset function can cause the TPMS to give false warnings or to give
no warning despite dangerously low tire pressure
Underinflation increases fuel consumption and tire wear.
Do not rely solely on the Tire Pressure Monitoring System. Check your tires regularly to make
sure they are properly inflated and have no signs of damage, such as punctures, cuts, cracks, and
blisters. Remove any objects that become embedded in the tire tread but have not penetrated into the
body of tire itself.
When you take delivery of the vehicle, the Tire Pressure Monitoring System is calibrated for the
factory-recommended cold tire inflation pressure for the tires on your vehicle, as shown on the label
inside the driver door
The system must be recalibrated in the appropriate menu in the MFI whenever you remove and
remount or change any wheel or tire on the vehicle, even if the reinstalled or replacement wheels and
tires are identical to those that were removed and even if the tire pressure does not change Tire
inflation pressure.
If you have to adjust the tire pressure on a warm tire, fill the tire with 2.0 - 4.35 psi (20 - 30 kPa)
more than the pressure specified on the tire pressure label
If the TPMS determines that the air pressure in at least one tire is too low, carefully check the
pressure in all four tires with an accurate tire pressure gauge. Low tire pressure usually cannot be
determined by looking at the tire. This is especially true of low-profile tires.
If you have work done on your wheels or tires, inform the workshop that the vehicle is equipped
with a Tire Pressure Monitoring System (TPMS).
New tires may expand slightly the first time they are driven at high speeds, which can trigger a
tire pressure warning. Remember that tire pressure can only be properly measured when the tire is
cold
Only replace old tires with tires that have been approved by Volkswagen for your vehicle type.
Indicator light (telltale)

Tire Pressure Monitoring System display messages in the instrument cluster
Display Possible cause or meaning Proper response
Lights up and a chime sounds once:

The inflation pressure of one or more
tires is significantly lower than the Stop safely as soon as possible!
benchmark pressure set by the driver - Reduce speed immediately! Avoid fast
Lights up or a tire has structural damage. concerning and hard braking!
Depending on vehicle equipment, the Check the condition and inflation pressure
message Please check tires! will of all tires. Have damaged tires replaced.
appear in the instrument cluster
display.
Flashes for about 70 seconds and then Check and, if necessary, adjust the tire
stays on: inflation pressure in all 4 tires. If the tire
System malfunction. pressure is correct, switch the ignition off
and back on. If the indicator light flashes
again and then stays on or does not go out
Flashes after checking and adjusting the air
pressure in all four tires and storing the
benchmark pressure in the MFI, take the
vehicle to an authorized Volkswagen dealer
or an authorized Volkswagen Service
Facility. Have the system checked.
WARNING
Incorrect tire pressures and/or underinflation can cause sudden tire failure, loss of control,
collision, serious personal injury, or even death.
When the warning symbol appears in the instrument cluster, stop the vehicle as soon
as it is safe to do so and inspect all tires.
Incorrect tire pressure and/or underinflation can cause increased tire wear and can affect
the handling of the vehicle and its stopping ability.
Incorrect tire pressure and/or underinflation can also lead to sudden tire failure, including
a blowout and sudden deflation, causing loss of vehicle control.
The driver is responsible for the correct tire pressures for all tires on the vehicle. The
recommended tire pressure values are listed on a sticker inside the driver door
The TPMS can only work correctly when all tires on the vehicle are filled to the correct
cold tire inflation pressure. Always maintain the correct cold tire inflation pressure so that
TPMS can do its job.
Using incorrect tire pressure values can cause accidents or other damage. Check the
pressure in all four tires when the tires are still cold. Never reduce air pressure in warm tires
to match cold tire inflation pressure.
Always inflate the tires to the correct specified cold tire pressure values for the tires
installed on the vehicle; see the tire inflation pressure label on the driver door jamb Tires
and wheels.
Always inflate tires to the recommended and correct tire pressure before driving off.
Driving with underinflated tires causes them to flex (bend) more, letting them get too hot,
which can result in tread separation, sudden tire failure, and loss of control.
Excessive speed and/or overloading can cause heat buildup, sudden tire failure, and loss
of control.
If the tire is not flat and you do not have to change the tire or wheel immediately, drive at
reduced speed to the nearest service station to check the tire pressure and add air as
required.
When replacing tires or wheel rims on vehicles equipped with TPMS, always read and
heed the information and all WARNINGS in the section Tires and wheels
pressure does not change Resetting and recalibrating the benchmark tire pressure.
WARNING
Improper use of the MFI reset function can cause the TPMS to give false warnings or to give
no warning despite dangerously low tire pressure
WARNING
NOTICE
If the ignition is switched on, an acoustic warning sounds when low tire pressure is detected. If a
system malfunction is detected, no acoustic warning sounds.
Driving for a longer period of time on rough roads or with a dynamic and sporty style can make
the TPMS system temporarily unavailable. The indicator light will come on, signaling a malfunction, but
will go out again once road condition or driving style change.
Tire Pressure Monitoring System and recalibration with the MFI

Your vehicle's Tire Pressure Monitoring System (TPMS) indirectly checks the tire pressure of all 4 tires
while you are driving by using the Anti-lock Brake System (ABS) sensors to monitor the tread
circumference (rolling circumference) and vibration characteristics of the individual tires.
The tread circumference of a tire can change:
If a tire's inflation pressure is too low.
If the tire's tread is damaged or the tire is structurally damaged.
If one side of the vehicle is more heavily loaded than the other.
If there is more weight on one axle than the other (such as when towing a trailer).
If a compact spare tire has been mounted.
If a wheel was replaced on each axle.
If a tire was changed.
If the tire pressure was changed, or wheels were rotated or replaced, but the TPMS was not reset.
If there are snow chains on the tires. Using snow chains can cause the system to give false
warnings because snow chains increase tire circumference.
The Tire Pressure Monitoring System (!) may not react at first or may not react at all when you are
driving in a sporty manner, or on snow-covered or unpaved roads, when you are driving with snow
chains, or in certain other situations. A change in the tread circumference of a tire is signaled by the
Tire Pressure Monitoring System indicator in the instrument cluster (telltale).
The tire pressure recommended for the tires originally installed on the vehicle is on a sticker on the
driver door jamb Tires and wheels.
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the
inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation
pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle
placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those
tires.)
As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System
(TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly
underinflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check
your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly
underinflated tire causes the tire to overheat and can lead to tire failure. Under inflation also reduces
fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's
responsibility to maintain correct tire pressure, even if underinflation has not reached the level to
trigger illumination of the TPMS low tire pressure telltale.
Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system
is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure
telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and
then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups
as long as the malfunction exists.
When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire
pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation
of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning
properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on
your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue
to function properly.
Resetting and recalibrating the benchmark tire pressure

Resetting the tire pressures in the Multi-function Indicator (MFI) resets the benchmark tire pressure
used by the TPMS to the current tire pressure in the tires based on the circumference of the tires.
To reset the reference tire pressure, switch on the ignition. In the MFI, navigate to the Settings menu
and select Tire pressure. Store and confirm the new tire pressures.
The re-calibration must be performed each time the tire pressure in one or more tires has been
adjusted or after one or more tires has been changed, exchanged, or repaired. The new tire pressures
are stored in the system only after at least 20 minutes of normal driving.
If you have reset the benchmark tire pressure when your tires do not have the correct tire pressure,
this will prevent the TPMS from working properly. It may then give false warnings or may not give any
warning even if the tire pressure is too low.
For this reason, it is vital to make certain that all four tires are inflated to the correct pressure
when they are cold, before calibrating the system. Cold tire tires are tires that have not been driven
more than a couple of miles (kilometers) at low speed within the last 3 hours.
Recalibrate the system to reset the benchmark TPMS pressure in the following
situations:
After installing tires on your vehicle that have recommended cold tire inflation pressures that are
different from the tires that were taken off.
After any tire on your vehicle is removed and then remounted, even if the same tire and wheel rim
that were taken off are reinstalled (for instance, after repair).
After any tire on your vehicle is changed and replaced by another tire, even if the replacement tire
is the same type and is inflated to the same pressure as the tire it replaced.
After adjusting the tire pressure of any tire on the vehicle to its correct cold tire inflation pressure,
either by putting air in one or more tires or by letting air out. Do this even though air was only added
(or let out) to bring the tire to the inflation pressure it should have had all along.
After rotating the front and rear wheels
After mounting the compact spare tire.
WARNING
Incorrect calibration can cause the TPMS to give false warnings or to give no warning despite
dangerously low tire pressures. Make certain the tire inflation pressure of all tires is correct
before calibrating the system.
WARNING
Incorrect tire pressure can cause sudden tire failure, loss of vehicle control and serious
personal injury.
Always check and correct air pressure in all four tires, particularly after changing,
exchanging, or repairing tires.
After that, always make sure that all 4 tires are inflated to the correct tire pressure for the
tires installed on the vehicle. Then recalibrate the system so that it can properly monitor the
pressure in the tire.
pressure does not change Resetting and recalibrating the benchmark tire pressure.
See the tire pressure label Tire inflation pressure and the Owner's Literature for
recommended cold tire inflation pressure and other important information.
When replacing tires or wheel rims, always read and heed all of the information and
WARNINGS Tires and wheels.
pressure does not change.
The Tire Pressure Monitoring System stops working if there is an ESC/ABS malfunction.
Vehicle operation.
After a low tire pressure warning, the vehicle must stand and must not be driven for at least one
minute before the new benchmark tire pressures can be stored.
Storage areas
Introduction
Storage compartment in the front doors
Storage compartment on the driver side
Eyeglass storage compartment in the overhead console
Storage compartments in the overhead console
Storage compartment in the front center console
Storage compartment in the front center armrest
Card holder
Glove compartment
Storage compartment in the rear center console
Other storage compartments
Store only lightweight or small objects in storage compartments.

Depending on options, there may be a factory-installed AUX-IN jack, or Media Device Interface
(MDI) / (MEDIA-IN) in the storage compartment in the front center armrest.
More information:
Passenger compartment
Driver assistance systems
Interior care and cleaning
booklet Radio or booklet Navigation system
WARNING
Loose objects can be thrown around the inside of the vehicle when the vehicle is moving,
especially during sudden maneuvers and hard braking. This can cause serious personal
injuries and even make the driver lose control of the vehicle.
Never let animals ride in the vehicle's open storage compartments, on top of the
instrument panel, or on the shelf behind the rear seats.
Never put hard, heavy or sharp objects in these places or in articles of clothing or bags in
the passenger compartment.
WARNING
Objects in the driver footwell can prevent the pedals from moving freely. This can cause loss
of vehicle control and increase the risk of serious personal injuries.
Always make sure that nothing can interfere with the pedals.
Always fasten floor mats securely to the floor.
Never put floor mats or other floor coverings on top of already installed floor mats.
Always make sure that nothing can fall into the driver footwell while the vehicle is moving.
WARNING
Some kinds of cigarette lighters can be lit unintentionally, or crushed causing a fire that can
result in serious burns and vehicle damage.
Always make sure that there are no lighters in the seat tracks or near other moving parts
before adjusting the seats.
Before closing a storage compartment, always make sure that no cigarette lighter can be
activated, crushed, or otherwise damaged.
Never leave a cigarette lighter in a storage compartment, on the instrument panel or in
other places in the vehicle. Heat buildup in the passenger and luggage compartment of a
parked vehicle can result in temperatures in the vehicle that are much higher than the outside
temperatures, particularly in summer. High temperatures could cause the cigarette lighter to
catch fire.
NOTICE
The defroster heating wires or antenna in the rear window can be damaged by hard or sharp
things on the shelf below the rear window
Do not keep any food, medicine, or other items sensitive to heat or cold in the vehicle. They
can be damaged or made unusable by heat or cold.
Things that are made of transparent materials (such as eyeglasses, magnifying glasses, or
transparent suction cups on the windows) can magnify sunlight and damage the vehicle.
The ventilation slots between the rear window and the luggage compartment cover must not be
blocked so that stale air can escape from the vehicle.
Storage compartment in the front doors
Fig. 117 In the driver door: Storage compartment.
There is a storage compartment in the driver and front passenger door. fig. 117 (1).
Storage compartment on the driver side
Fig. 118 On driver side: Storage compartment.
To open the compartment, pull in the direction of the arrow fig. 118.
To close, push up storage compartment until it latches.
Coin holders may be in this storage compartment.
Eyeglass storage compartment in the overhead console
Fig. 119 In the overhead console: Storage compartment.
This storage compartment can be used for storing eyeglasses or other light objects.
To open, briefly press and release the storage compartment cover fig. 119 (arrow).
To close, push the hatch up until it latches.
Storage compartments in the overhead console
Fig. 120 In the overhead console: Storage compartments.
To open, briefly press and release the button fig. 120 (arrow).
To close, push up storage compartment until it latches.
Storage compartment in the front center console
Fig. 121 In the lower center console: Storage compartment.
This storage compartment can be used for storing small items or other light objects.
To open, fold the cover up from the bottom in the direction of the fig. 121 (arrow).
To close, push the cover down until it latches.
The front center console storage compartment has a 12 Volt socket 12 Volt sockets in the
vehicle.
Storage compartment in the front center armrest
Fig. 122 In the front center armrest: Storage compartment.
The sections of a center armrest can be opened separately to access the storage compartment.
A MEDIA-IN, AUX-IN and 12 Volt socket may also be located in the storage compartment.
To open, press the button and lift up the center armrest completely in the direction of the arrow
fig. 51.
To close the cover, you must first open the armrest completely. This will reset the height position, and
allow the cover to be closed completely.
WARNING
The center armrest can restrict the driver's arm movement and cause crashes and serious
personal injury.
Always keep storage compartments in the center armrest closed while driving.
WARNING
Never let a passenger, especially a child, ride on the center armrest.
There may be a factory-installed (MEDIA IN), Apple iPod adapter, AUX-IN or 12 Volt socket
located in the storage compartment in the front center armrest Booklet Radio or
Booklet Navigation system.
Card holder
Fig. 123 In the lower part of the center console: Card holder.
Fig. 124 In the upper part of the center console: Card holder.
Both the lower part of the center console fig. 123 and the upper part of the center console
fig. 124 may have a card holder (arrow) to store coins, gas cards, parking receipts or similar items,
for example.
To help prevent theft and unauthorized use, do not use a card holder to store ATM cards or credit
cards.
Glove compartment
Fig. 125 Glove compartment.
Fig. 126 Open glove compartment.
(1) Holder for pen and notepad.
(2) Notepad holder.
(3) Air vent.
(4) Owner's Manual in Owner's Manual slot.
Opening and closing the glove compartment

If necessary, unlock the glove compartment. It is locked when the key slot is vertical.
To open, pull the handle fig. 125.

To close, push the hatch up.
Owner's Manual slot

The Owner's Manual fig. 126 (4) is located in this slot and should always be kept there.
Holders
There is a pen holder (1) and a notepad holder (2) in the glove compartment.
Cooling the glove compartment

There is an air vent (3) in the back of the glove compartment. Cool air can be directed into the glove
compartment if the air conditioner is on. Open or close the air vent by turning it.
WARNING
An open glove compartment door can increase the risk of serious injury during sudden
braking or driving maneuvers or in a crash.
Always keep the glove compartment closed while the vehicle is moving.
NOTICE
In some vehicle models, design considerations have made it necessary to have openings in the
glove compartment behind the owner's manual slot, for example. Small items may fall through
these openings and get behind the instrument panel. This can cause unusual noises and
damage the vehicle. Never put any small objects in the glove compartment for this reason.
Storage compartment in the rear center console
Fig. 127 Storage compartment in the rear center console.
A storage compartment is located in the rear center console fig. 127.

Other storage compartments
Fig. 128 On the left in the luggage compartment: Side storage compartment.
Fig. 129 On the right in the luggage compartment: Side storage compartment.
Storage compartments in the luggage compartment

Additional storage compartments are located in the sides of the luggage compartment fig. 128 and
fig. 129.
To open, turn the latch counterclockwise and fold down the lid.
To close, fold the compartment lid all the way up and turn the latch clockwise.
Additional storage
In the front and rear center consoles.
In the front and rear door trim panels.
Coat hooks on the center door pillars and on the overhead grab handles in the rear.
Shopping bag hooks in the luggage compartment Luggage compartment.
WARNING
Clothes or other items on the shelf behind the rear seat backrest may limit visibility, and
cause accidents and severe personal injuries.
Always hang clothes so that they do not limit visibility.
Always use the built-in coat hooks only for lightweight clothing. Never leave any heavy or
sharp-edged items in the pockets that may interfere with airbag deployment and can cause
personal injury in a collision.
Cup holders
Introduction
Cup holders in the front center console
Cup holders in the rear center armrest
Beverage bottle holders

There is a place for bottles in the open compartments in the driver and passenger doors.
The bottle volume must not exceed 24 oz. (0.5 liter) .
More information:
WARNING
Improper use of beverage holders can cause injuries.
Never put hot drinks in the cup holders. During normal or sudden maneuvers, sudden
braking or in a collision, hot liquid can be spilled and cause burns!
Make certain that bottles or other items cannot fall into the driver's footwell while the
vehicle is moving and interfere with the movement of the pedals.
Never put heavy cups, food or other heavy items in the cup holders. Heavy items can fly
through the passenger compartment in a crash and cause serious injury.
WARNING
Hot or freezing temperatures in the passenger compartment can cause closed bottles to
explode or break.
Never leave closed bottles a very hot or cold vehicle.
WARNING
Bottles and other things can fall into the driver's footwell and interfere with the pedals while
driving.
Make sure that bottles cannot fall into the driver's footwell during driving to avoid
obstructing the pedals.
Use the bottle holders only for standard beverage bottles holding no more than 1.5 quarts
/ 1.5 l (front doors) and 0.5 quarts / 0.5 l (rear doors).
NOTICE
Never put open drinks in the cup holder when the vehicle is moving. The drinks can spill and
damage the vehicle, including the electrical system.
The cup holder has inserts that can be removed for cleaning.
Cup holders in the front center console
Fig. 130 In the front center console: Cup holders.
Opening the cup holder compartment

Slide the cover to the rear fig. 130.
Closing the cup holder

Slide the cover forward.
Cup holders in the rear center armrest
Fig. 131 In the rear center armrest: Cup holders.
In order to use the cup holder in the rear center armrest, the padded armrest must be pulled off
WARNING
Always keep the armrest folded up when the vehicle is moving to reduce the risk of injury.
Never let anybody, especially children, ride on the rear center armrest or in the center
position on the rear seat when the armrest is folded down. An improper seating position can
increase the risk of serious injury in a crash.
Power outlets
Introduction
12 Volt sockets in the vehicle
Electrical devices can be connected to the vehicle sockets.

The connected devices must be in good working order.
More information:
Storage areas
WARNING
Improper use of electrical sockets and electrical devices may start a fire and cause severe
personal injury.
Never leave children unattended in the vehicle. Sockets and connected devices can be
used when the ignition is switched on.
If the connected device gets warm, immediately switch it off and disconnect the power
supply.
NOTICE
To help prevent damage to the electrical system, never connect any accessories such as a
solar panel or vehicle battery charger to a 12 Volt socket.
Only use accessories which have been tested for electromagnetic compatibility with a
motor vehicle.
To help prevent damage from voltage fluctuations, switch off all electrical consumers
connected to the 12 Volt socket before switching the ignition on or off or starting the engine.
Never connect devices to a 12 Volt socket that draw more than the maximum wattage the
socket can supply. Drawing too much power can damage the vehicle electrical system.
Please turn off the engine when you stop for any length of time.
The vehicle battery will drain if you use electrical equipment when the engine is not running.
Unshielded devices may interfere with radio reception or the vehicle's electrical system.
Operating electrical devices near the windshield-integrated antenna may interfere with AM radio
reception.
12 Volt sockets in the vehicle
Fig. 132 In the luggage compartment: 12 Volt socket.
Fig. 133 Rear center console: 12 Volt.
Maximum power draw
Socket Maximum power draw
12 Volt 120 watts
The maximum power draw at any one socket must never be exceeded. Electrical devices should have
information on them that says how much power they draw.
If 2 or more electrical devices are connected at the same time, the total power draw of all connected
devices must never be more than 190 watts .
12 Volt socket
The 12 Volt socket works only when the ignition is switched on.
If the ignition is on but the engine is not running, the vehicle battery will be drained by any device that
is plugged in and turned on. For this reason, never use the electrical socket unless the engine is
running.
To help prevent damage from voltage fluctuations, switch off all electrical devices connected to a 12
Volt socket before switching the ignition on or off or starting the engine.
The vehicle may have 12 Volt sockets at the following places:
In the storage compartment in the lower front center console.
In the storage compartment in the front center armrest.
In the luggage compartment fig. 132.
In the rear center console fig. 133.
NOTICE
Follow the manufacturer's instructions for connected devices!
Never exceed the maximum power consumption, or the entire vehicle electrical system may
be damaged.
Only use equipment that has been tested for electromagnetic compatibility and complies
with applicable guidelines.
Never feed current into the socket, with a solar panel, for example.
Unshielded devices may interfere with radio reception or the vehicle's electrical system.
Introduction
Vehicle key positions in the ignition switch
Starter button
Starting the engine
Starting the engine
Stopping the engine
Stopping the engine
Electronic immobilizer
Immobilizer display
If an unauthorized vehicle key is used or the system malfunctions, or Immobilizer active! may
appear on the instrument cluster. The engine cannot be started.
Push-starting and tow-starting

For technical reasons, never try to push-start or tow-start the vehicle. Jump-start the vehicle instead
while following proper and safe procedures.
More information:
Vehicle key set
Shifting
Steering
Braking and parking
Refueling
Fuel
Jump-starting
Towing
WARNING
Switching off the engine while the vehicle is moving can make the vehicle harder to stop and
result in loss of vehicle control, leading to collisions and severe personal injuries.
Brake and steering assistance systems, the airbag system, safety belt pretensioners, and
other vehicle safety features only work when the engine is running.
Switch off the engine only when the vehicle is not moving.
WARNING
To reduce the risk of serious personal injury when starting and running the vehicle's engine:
Never start the engine or let it run in a confined or enclosed area. Engine exhaust contains
carbon monoxide, a poisonous, colorless, and odorless gas. Carbon monoxide can cause
unconsciousness and death.
Never leave the vehicle unattended with the engine running. The vehicle could move
suddenly or some other unexpected event could occur resulting in property damage or
personal injury.
Never use starting assist fluids. Starting fluids can explode and can cause a run-away
vehicle condition.
WARNING
The vehicle exhaust system and the catalytic converter can get very hot. They can cause fires
and serious personal injury.
Never park the vehicle where the hot exhaust system or catalytic converter could ignite
flammable materials, such as brush, leaves, dry grass, spilled fuel, etc.
Never apply additional undercoating or rustproofing on or near the exhaust manifold,
exhaust pipes, catalytic converter, or heat shields.

Lights
up
Apply the brake pedal to select a drive gear.

Brake pedal not depressed.
Also refer to electronic parking brake
Flashes Possible cause Proper response
The release button in the selector lever

did not engage. Vehicle movement is Engage selector lever release button
prevented.
WARNING
Whenever stalled or stopped for repair, move the vehicle a safe distance off the road, turn
on the emergency flashers, stop the engine, and use other warning devices to warn
NOTICE
Vehicle key positions in the ignition switch
Fig. 134 In the ignition switch: Vehicle key positions.
If there is no vehicle key in the ignition, the steering column is locked.
Vehicle key position fig. 134

(0) Ignition switched off, steering column lock engaged. The vehicle key can be removed.
(1) Ignition is switched on. Steering column lock can be released.
(2) Start the engine. When the engine starts, release the vehicle key. When released, the vehicle
key returns to position (1).
If you use the wrong key

If an unauthorized vehicle key has been inserted into the ignition switch, it can be removed as follows:
Automatic transmission: The vehicle key cannot be removed from the ignition unless both the key
and the selector lever have been moved to the correct position. Press the release button on the
transmission selector lever, move the selector lever to the Park (P) position and release the button.
The vehicle key can now be removed.
Manual transmission: Pull out the vehicle key.
WARNING
Improper use of remote control vehicle keys can result in serious personal injury.
Always take the key with you when you leave the vehicle. The engine can be started and
vehicle systems such as the power windows can be operated, leading to serious personal
injury.
Leaving the key in the ignition for a long time when the engine is not running will drain the vehicle
battery.
Leaving the selector lever for a long period of time in any position other than Park (P) when the
ignition is switched off can drain the vehicle battery.
On automatic transmission vehicles, the vehicle key can be removed from the ignition switch
only when the transmission is in Park (P). You may have to press the release button on the
transmission selector lever to put the lever into Park (P).

Starter button
Fig. 135 In the center console: Starter button of the Keyless Access locking and starting system.
Fig. 136 Emergency starting feature on vehicles with Keyless Access.
The starter button can only be used when an authorized vehicle key is in the vehicle.
When leaving the vehicle, the electronic steering column lock is activated when the ignition is
switched off and the driver door is opened Steering.
Switching the ignition on and off
Briefly press the starter button once without depressing the brake or clutch pedals .
Emergency start feature

If an authorized remote control vehicle key is in the passenger compartment but the instrument cluster
displays Key not in Range when you push the starter button, the remote control vehicle key
battery is weak or dead. You can still start the engine using the Emergency start feature:
Make sure the selector lever is in the Park (P) position.
Hold the remote control vehicle key against the right side of the steering column trim immediately
after pressing the starter button fig. 136.
The ignition automatically switches on and the engine starts.
Emergency shut-off
If the engine does not switch off by briefly pressing the starter button, emergency shutoff is necessary:
Press the starter button twice within 1 second or once for more than 2 seconds in Stopping
the engine Stopping the engine.
The engine switches off automatically.
Engine restart function

If no authorized remote control vehicle key is identified in the passenger compartment after the engine
has been switched off, the engine can be restarted within about 5 seconds. A related message is
shown in the instrument cluster display.
After the 5 seconds have passed, the engine can no longer be started without an authorized vehicle
key in the passenger compartment.
WARNING
Unintended vehicle movement can cause serious personal injury.
Do not depress the brake or clutch pedals when switching on the ignition, as the engine
could otherwise start immediately.
WARNING
Improper use of vehicle keys can result in serious personal injury.
Always take the key with you when you leave the vehicle. Children or unauthorized
persons may use it to lock the vehicle, start the engine, and operate vehicle systems such as
the power windows, leading to serious personal injury.
vehicle. The doors can be locked using the remote control vehicle key. This could result in
If the ignition is switched on or the engine is running and the driver door is opened, a chime
sounds. The chime is also a reminder to switch off the engine and turn off the ignition before leaving
and locking the vehicle from the outside.
Starting the engine

Please perform these steps only in the order listed.
Step Vehicles without Keyless Access Vehicles with Keyless Access
1. Automatic transmission: Depress the brake pedal and hold it down until step 4 is
completed.
1a. Manual transmission: Depress clutch pedal fully and hold until the engine has started.
2. Shift the transmission into Neutral (N) or Park (P) (automatic), or into Neutral (manual
only).
3. Turn the vehicle key to position fig. 134 Briefly press the starter button fig. 135
(2) do not depress the accelerator pedal. do not depress the accelerator pedal. An
authorized vehicle key must be inside the
vehicle in order to start the engine.
4. When the engine starts, release the remote When the engine starts, release the starter
control vehicle key. button.
5. If the engine does not start, switch off the If the engine does not start, switch off the
ignition and start again after about 1 minute. ignition and start again after about
one minute. Use the emergency start
function if necessary
6. Release the electronic parking brake when you are ready to start driving
WARNING
Never leave the vehicle unattended while the engine is running. The vehicle could move
suddenly, especially when the vehicle is in gear, resulting in accidents and personal injury.
WARNING
Starting fluids can explode and can cause a run-away vehicle condition.
Never use starting assist fluids.
NOTICE
You can damage the starter or the engine if you try to start the engine when the vehicle is
still moving, or if you try to restart the engine right after switching it off.
Avoid high engine speeds, full throttle acceleration, and heavy engine loads when the
engine is cold.
Do not try to start the engine by pushing or towing the vehicle. Unburned fuel can get into
the catalytic converter and damage it. The steering column may also be locked.
Do not let your vehicle warm up while standing; instead, start driving right away after making sure
that you have good visibility through all windows. This will help the engine reach operating
temperature faster and keep down emissions.
Major consumers of electricity are temporarily switched off when the engine is being started.
After starting a cold engine, there may be increased operating noises for a few seconds. This is
normal and harmless.
Stopping the engine

Vehicles without Keyless Access Vehicles with Keyless Access
1.
Bring the vehicle to a complete stop .
2. Depress and hold down the brake pedal until step 4 is completed.
3. Automatic transmission: Shift the transmission into Park (P).
4. Apply the electronic parking brake to help prevent the vehicle from moving
Vehicles without Keyless Access Vehicles with Keyless Access
5. Turn the vehicle key to position fig. 134 Briefly press the starter button fig. 135. If
(0) in the ignition switch. the engine will not switch off, carry out the
emergency shutoff procedure
With a manual transmission, shift into 1st gear (vehicle on flat surface or pointing uphill) or
6.
reverse (vehicle pointing downhill).
Removing the vehicle key from the ignition Opening the doors switches off electrical
7. switches off electrical equipment and equipment and activates the steering
activates the steering column lock. column lock.
WARNING
Never stop the engine before the vehicle has come to a complete stop. You can lose control
of the vehicle, crash, and be seriously injured.
The airbags and safety belt pretensioners will not work when the ignition is switched off.
The brake booster does not work when the engine is not running. More brake pedal
pressure will be needed to stop the vehicle.
The power steering system does not work when the engine is not running, and you will
need more force to steer the vehicle.
When the key is removed from the ignition switch, the steering will lock and you will not
be able to steer the vehicle.
NOTICE
If the vehicle has been driven hard for a long time, the engine could overheat when it is
stopped. To reduce the risk of engine damage, let the engine idle in Neutral for about 2 minutes
before you switch off the ignition.
On vehicles with automatic transmissions, the vehicle key can only be removed from the ignition
when the transmission is in Park (P).
After the engine has been switched off, the radiator fan in the engine compartment may keep
running for several minutes, or may start running after the vehicle has been parked for a while, even if
the ignition is switched off and the vehicle key has been removed. The radiator fan shuts off
automatically when the engine has cooled down enough.
Applicable only in Canada
Stopping the engine
Vehicles without Keyless Access
1.
Bring the vehicle to a complete stop .
2. Depress and hold down the brake pedal until step 4 is completed.
3. Automatic transmission: Shift the transmission into Park (P).
4. Apply the electronic parking brake to help prevent the vehicle from moving
5. Turn the remote control vehicle key to position fig. 134 (0) in the ignition switch.
With a manual transmission, shift into 1st gear (vehicle on flat surface or pointing uphill) or
6.
reverse (vehicle pointing downhill).
Removing the vehicle key from the ignition switches off electrical equipment and activates
7.
the steering column lock.
WARNING
Never stop the engine before the vehicle has come to a complete stop. You can lose control
of the vehicle, crash, and be seriously injured.
The airbags and safety belt pretensioners will not work when the ignition is switched off.
The brake booster does not work when the engine is not running. More brake pedal
pressure will be needed to stop the vehicle.
The power steering system does not work when the engine is not running, and you will
need more force to steer the vehicle.
When the key is removed from the ignition switch, the steering will lock and you will not
be able to steer the vehicle.
NOTICE
If the vehicle has been driven hard for a long time, the engine could overheat when it is
stopped. To reduce the risk of engine damage, let the engine idle in Neutral for about 2 minutes
before you switch off the ignition.
On vehicles with automatic transmissions, the vehicle key can only be removed from the ignition
when the transmission is in Park (P).
After the engine has been switched off, the radiator fan in the engine compartment may keep
running for several minutes, or may start running after the vehicle has been parked for a while, even if
the ignition is switched off and the vehicle key has been removed. The radiator fan shuts off
automatically when the engine has cooled down enough.
Electronic immobilizer
The immobilizer helps to prevent the engine from being started and driven with an unauthorized
vehicle key.
There is a microchip inside the vehicle key. The chip deactivates the immobilizer automatically when
an authorized remote control vehicle key is inserted into the ignition switch.
The electronic immobilizer is automatically activated when the remote control vehicle key is pulled out
of the ignition switch. On vehicles with Keyless Access, the vehicle key must be outside the vehicle.
Unlocking or locking the vehicle from the outside.
The engine can therefore only be started with an authorized and correctly coded genuine Volkswagen
vehicle key. Coded vehicle keys are available from authorized Volkswagen dealers, authorized
Volkswagen Service Facilities, and from certain independent repair facilities and locksmiths who are
qualified to make these vehicle keys Vehicle key set.
If an unauthorized vehicle key is used, Immobilizer active! appears in the instrument cluster
display. The vehicle cannot be operated with this key.
A Declaration of Compliance with the United States FCC and Industry Canada regulations is on
Declaration of Compliance, Telecommunications and Electronic Systems.
Using genuine Volkswagen keys helps minimize the risk of malfunctions.

Shifting
Introduction
Pedals
Manual transmission: Gearshift lever
Automatic transmission: Selector lever
Shifting with Tiptronic

Driving with automatic transmission

Automatic transmission malfunction
When the ignition is switched on and the transmission is in Reverse (R):

The backup lights come on.
Climatronic switches automatically to air recirculating mode.
The rear window wiper switches on when the windshield wipers are switched on.
The camera for the Rear Assist switches on (if applicable).
More information:
Lower center console
Instruments
Braking and parking
Reverse driving assistant (Rear Assist) Rear Assist
Climate control
Engine control and emission control system
WARNING
Rapid acceleration can cause skidding and loss of traction, especially on slippery roads,
resulting in a loss of vehicle control, collisions, and serious personal injury.
Only use the kick-down feature or fast acceleration if visibility, weather, road, and traffic
conditions permit and other drivers will not be endangered by your driving and the vehicle's
acceleration.
WARNING
Constant braking causes the brakes to overheat and even to fail leading to collisions and
Never ride the brakes or apply the brake pedal too often or too long.
Riding the brakes will substantially reduce braking performance, increase stopping
distance, and can cause complete brake system failure.
NOTICE
Never ride the brakes by keeping your foot on the brake pedal when you do not want to
brake. This will make the brakes wear faster.
Before driving downhill, especially on hills that are long or steep, always reduce speed and
shift into lower gear (manual or automatic transmission). This will let the vehicle use engine
braking and reduce the load on the brakes. Otherwise, the brake system could overheat and
even fail. Only use the brakes when you need them to slow the vehicle down more or to stop.

Lights
up
Apply the brake pedal to select a drive gear.

Also refer to electronic parking brake
The release button in the selector lever

did not engage. Vehicle movement is Engage selector lever release button
prevented.
Drive at low engine speed (rpm) to the

Automatic transmission malfunction. The
nearest authorized Volkswagen dealer or
symbol alternates with the selector lever
authorized Volkswagen Service Facility to
indicator (D, for example).
have the system checked.
WARNING
Whenever stalled or stopped for repair, move the vehicle a safe distance off the road, turn
on the emergency flashers, stop the engine, and use other warning devices to warn
NOTICE
Pedals
Fig. 137 Pedals in vehicles with manual transmission: 1 Accelerator pedal, 2 Brake pedal, 3 Clutch pedal.
Fig. 138 Pedals in vehicles with automatic transmission: 1 Accelerator pedal, 2 Brake pedal.
All pedals must always be able to move freely in and out without interference from floor mats or other
things.
Only use floor mats that leave the pedal area free and are held securely in place with floor mat
fasteners to help prevent sliding.
If a brake circuit malfunctions, more brake pedal travel is needed to bring the vehicle to a full stop, and
it is important that nothing is in the way when you have to depress the brake pedal harder and farther
than normal.
WARNING
Objects in the driver footwell can prevent the pedals from moving freely. This can cause loss
of vehicle control and increase the risk of serious personal injuries.
Always make sure that nothing can interfere with the pedals.
Always fasten floor mats securely to the floor.
Never put floor mats or other floor coverings on top of already installed floor mats.
Always make sure that nothing can fall into the driver footwell while the vehicle is moving.
NOTICE
Always make sure that the pedals are able to move freely and that nothing can interfere with
them. If a brake circuit fails, more brake pedal travel will be needed to bring the vehicle to a
stop. The brake pedal must be pressed farther and harder than normal.
Manual transmission: Gearshift lever
Fig. 139 Gearshift pattern of a 6-speed manual transmission.
The positions of the individual gears are shown on the gearshift lever fig. 139.
Depress the clutch pedal all the way and hold.
Move the gearshift lever into the desired position.
Release the clutch pedal to engage the gear.
The clutch pedal must be fully depressed to start the engine.
Shifting into reverse

Only shift to the reverse gear when the vehicle is not moving.
Depress the clutch pedal fully and hold .
Move the gearshift lever to neutral and press down.
Move the shift lever to the left and then push forward into the reverse gear position (R) .
Release the clutch pedal to engage the gear.
Downshifting
You should always downshift gear by gear when driving, meaning always into the next lowest gear. Do
not downshift when the engine rpm (revolutions per minute) is too high . At fast speeds or high
engine rpms, skipping over one or more gears when downshifting can cause damage to the clutch and
transmission, even if a gear is not engaged .
WARNING
Downshifting to a lower gear incorrectly can result in loss of vehicle control and can cause
accidents and serious personal injuries.
WARNING
When the engine is running and a gear is engaged, the vehicle will start to move as soon as
the clutch pedal is released, even when the parking brake is applied. This also applies when
the parking brake is engaged.
Never shift into reverse when the vehicle is moving.
NOTICE
Shifting down to a gear that is too low when driving at fast speeds or high engine rpms can
cause extensive damage to the clutch and transmission. That is true even if the clutch pedal is
pressed so that the clutch is not engaged.
NOTICE
To help prevent damage and premature wear:
Do not rest your hand on the gearshift lever while driving. Over time, the pressure will
cause premature wear in the transmission.
Make sure that the vehicle has come to a complete stop before shifting into reverse.
Always depress the clutch pedal all the way when changing gears.
Do not hold the vehicle on a hill using engine power with the clutch pedal partially engaged
and the engine running.
Automatic transmission: Selector lever
Fig. 140 Automatic transmission selector lever with shift lever release button (arrow).
Automatic transmission vehicles have an Automatic Shift Lock (ASL). With ASL, you must depress the
brake pedal and hold it down while pressing the release button on the selector lever handle in the
direction of the arrow fig. 140 in order to move the selector lever out of Park (P) and into a drive
gear. When the selector lever is in Neutral (N), you also have to depress the brake pedal before you
can move the selector lever to Drive (D), Sport Drive (S), or Reverse (R).
If the ignition is switched on, either the current selector lever setting or the current gear is shown in the
instrument cluster display.
Selector Designation
Meaning
lever
position
Park The drive wheels are mechanically locked.

Select only when the vehicle is not moving. To change the
selector lever position, switch on the ignition (if it is off) and then
press the selector lever release button while holding down the
brake pedal.
Reverse The reverse gear is engaged.

Shift into Reverse only when the vehicle is not moving.
Neutral Transmission is in Neutral position. No power is transmitted to

the wheels and no engine braking effect is available.
Drive (standard All forward gears shift up and down automatically. The
driving position) transmission shifts as needed depending on engine load,
individual driving style, and vehicle speed.
Sport Drive (Sport All forward gears automatically upshift later and downshift
driving position) earlier than in the (D) (Drive) position, to take full advantage of
the engine's power reserves. The transmission shifts as needed
depending on engine load, individual driving style, and vehicle
speed.
Automatic Shift Lock (ASL)

The Automatic Shift Lock (ASL) in Park (P) and Neutral (N) prevents drive positions from being
engaged inadvertently, which would cause the vehicle to move.
To release the ASL, depress and hold the brake pedal with the ignition switched on. Press the release
button on the selector lever at the same time.
The ASL is not engaged if the selector lever is moved quickly through Neutral (N) (e.g., when shifting
from Reverse (R) to Drive (D)). This makes it possible to rock the vehicle backwards and forwards if
it is stuck in snow or mud. The ASL engages automatically if the brake pedal is not depressed and the
lever is in Neutral (N) for more than about 1 second and the vehicle is traveling no faster than about
3 mph (5 km/h).
Depress and then release the brake pedal.
WARNING
Moving the selector lever to the wrong position can cause loss of vehicle control, a collision,
Never accelerate when moving the selector lever.
When the engine is running and a drive position is engaged, the vehicle will start to move
as soon as the brake pedal is released.
Never shift into Reverse or Park when the vehicle is moving.
WARNING
Unintended vehicle movement can cause serious personal injury.
Never get out of the driver's seat while the engine is running, especially when the
transmission is in a drive gear. If you must leave your vehicle while the engine is running,
always set the parking brake and shift the transmission into Park (P).
Never leave the vehicle in Neutral (N). It will roll down hills, whether the engine is running
or not.
When the engine is running and a drive gear - Drive (D), Sport Drive (S), or Reverse (R) -
has been selected, press and hold the brake pedal to keep the vehicle from moving. The
vehicle may creep and move forward or backward even if the engine is idling slowly.
Never shift into Reverse (R) or Park (P) when the vehicle is moving.
NOTICE
Even though the transmission is in Park (P), the vehicle may move a couple of inches (a few
centimeters) forwards or backwards if you take your foot off the brake pedal after stopping the
vehicle without first setting the electronic parking brake.
If the selector lever is moved into Neutral (N) by mistake when the vehicle is moving, take your
foot off the accelerator pedal. Wait until the engine speed has dropped to idle speed before moving
the selector lever into a drive gear.
Leaving the selector lever for a long period of time in any position other than Park (P) when the
ignition is switched off can drain the vehicle battery.
Shifting with Tiptronic
Fig. 141 Selector lever in Tiptronic position.
Tiptronic lets you upshift and downshift manually with the automatic transmission. When Tiptronic
mode is used, the transmission stays in the current gear and does not upshift or downshift
automatically unless the transmission senses a situation where upshifting or downshifting is necessary
to keep the engine from over- or under-revving.
Using Tiptronic with the selector lever
Push the selector lever sideways to the right from Drive (D) position into the Tiptronic position
in Automatic transmission: Selector lever.
Briefly push the selector lever forward (+) to upshift into a higher gear or backward () to downshift
into a lower gear fig. 141.
NOTICE
During acceleration, the transmission will shift automatically into the next higher gear
before reaching maximum engine speed (rpm).
If you use Tiptronic to shift into a lower gear, the transmission will downshift only when
doing so will not over-rev the engine.
Driving with automatic transmission

All forward gears shift up and down automatically.
Driving on hills
The steeper the grade, the lower the gear that must be selected. Lower gears increase the braking
effect of the engine. Never coast downhill in Neutral (N).
Reduce speed.
Switch to Tiptronic mode by moving the selector lever from Drive (D) to the right into the Tiptronic
position Shifting with Tiptronic.
Downshift by pulling the selector lever back briefly (-).
Stopping and starting on hills: If you stop on a hill with the vehicle in gear, you must depress the
brake pedal or engage the electronic parking brake to keep the vehicle from rolling. Do not release the
brake pedal or the parking brake until the vehicle has started to move forwards .
Kick-down acceleration
The kick-down feature permits maximum acceleration when the selector lever is in the Drive (D),
Sport Drive (S) or Tiptronic mode.
If you push the accelerator all the way down, the vehicle will automatically downshift, depending on
vehicle speed and engine speed (rpm). This feature lets you take advantage of the full acceleration
capacity of the vehicle .
With kick-down actuated, the transmission will stay in the current gear longer and not upshift until the
engine reaches maximum rpm.
WARNING
Rapid acceleration can cause skidding and loss of traction, especially on slippery roads,
resulting in a loss of vehicle control, collisions, and serious personal injury.
Only use the kick-down feature or fast acceleration if visibility, weather, road, and traffic
conditions allow it and other drivers will not be endangered by your driving and the vehicle's
acceleration.
Always adapt your driving to the traffic flow.
NOTICE
When stopping on hills with the transmission in a drive gear, do not use the accelerator to
help prevent the vehicle from rolling backwards. This can cause the automatic transmission to
overheat and be damaged.
Never let the vehicle coast or roll down a hill in Neutral (N), especially when the engine is
not running. The transmission will not be lubricated and will be damaged.
Automatic transmission malfunction

Emergency shift program

If all selector lever position indicators in the instrument cluster display are highlighted against a bright
background, there is a system malfunction. The automatic transmission will then operate in the
emergency shift program. The emergency shift program lets you drive the vehicle, but at a reduced
speed and without being able to use all of the forward gears.
In any event, have the automatic transmission checked by an authorized Volkswagen dealer or
NOTICE
As soon as you get any of these warnings about transmission overheating, you must either
park the vehicle in a safe place or drive faster than 12 mph (20 km/h).
If the text message and acoustic warning repeat themselves every 10 seconds or so, you
must park the vehicle in a safe place as soon as you can safely do so and stop the engine. Let
the transmission cool down.
To help prevent damage to the transmission, do not drive the vehicle again until the
acoustic warning has stopped. As long as the engine is overheated, avoid stop and start
driving and avoid low speeds (walking pace).
Steering
Introduction
Steering system information
The power steering system is not hydraulic, it is electro-mechanical. In both cases, the power steering
works only when the engine is running.
The hydraulic power steering system uses hydraulic lines, hydraulic oil, a pump, a filter, and other
parts to maintain a constant oil pressure in the hydraulic system.
The electromechanical power steering system automatically adjusts to driving speed, steering torque,
and the steering angle of the wheels. It delivers extra steering force only when you are actually turning
the wheels. The electromechanical power steering works only when the engine is running.
More information:
12 Volt vehicle battery
Towing 414
WARNING
Turning the steering wheel is very hard when the power steering system is not working. This
makes it harder to steer and control the vehicle.
Power steering works only when the engine is running.
Never let the vehicle coast with the engine switched off.
stop. The steering wheel will lock and you will be unable to control the vehicle.

Lights
up
Stop!
Have the power steering system checked
Power steering malfunction. immediately by an authorized Volkswagen
dealer or an authorized Volkswagen Service
Facility.
Lights
up
Stop, restart the engine, and drive a short

distance. If the yellow warning light does not
come on again, you do not need to have the
steering system checked.
Power steering assist is reduced.
Otherwise, have the steering checked
immediately by an authorized Volkswagen
dealer or an authorized Volkswagen Service
Facility.
Vehicle battery was disconnected and Drive a short distance at about 10 - 12 mph
has been reconnected. (15 - 20 km/h).
Stop!
Electronic steering column lock The ignition cannot be switched on. The
malfunction. vehicle must not be towed! Get professional
assistance.
Steering system stiff. Turn the steering wheel back and forth.
Switch the ignition off and then switch it on

again. Heed any messages shown in the
instrument cluster display, if applicable.
On vehicles with Keyless Access, press the
starter button briefly twice in a row without
Steering column not locked / unlocked. depressing the brake or clutch pedal.
Do not drive any farther if the steering
column remains locked after you switch on
the ignition. Contact your authorized
Volkswagen dealer or an authorized
Volkswagen Service Facility for assistance.
WARNING
NOTICE
Steering system information
To help make it more difficult to steal your vehicle, you should always make sure the steering column
is locked before leaving the vehicle.
Electronic steering column lock

The steering column is locked by removing the remote control vehicle key from the ignition switch
when the vehicle is not moving standing still. The electronic steering column lock does not lock if the
vehicle moves for more than 10 seconds after the remote control vehicle key is removed.
Vehicles with Keyless Access: The steering column is locked if the driver door is opened with the
ignition switched off. The vehicle must be standing still and the transmission must be in Park (P) on an
automatic transmission vehicle.
If the driver door is opened before the ignition is switched off, the electronic steering column lock is
activated only after the vehicle has been locked with the vehicle key or via the sensor in the door
handle.
Mechanical steering column lock

Vehicles without Keyless Access: The steering column is locked if the vehicle is stationary and the
vehicle key is removed from the ignition switch.
Engaging the steering column Disengaging the steering column

lock lock
Parking the vehicle Turn the steering wheel slightly to

take pressure off the steering
column lock.
Remove the vehicle key. Insert the vehicle key into the
ignition switch.
Turn the steering wheel slightly until Hold the steering wheel in this
you hear the steering column lock position and turn the ignition switch.
engage.
Power steering
Power steering automatically adjusts to driving speed, steering torque, and the steering angle of the
wheels. Power steering works only when the engine is running.
If power steering is reduced or lost completely, it will be much harder to steer and control the vehicle.
Counter-steering assistance
Counter-steering assistance is part of Electronic Stability Control (ESC). This feature makes it easier
for the driver to control the vehicle in difficult situations. For example, if you have to brake hard on a
surface that provides uneven traction, the vehicle could pull to the right or left. ESC detects this
situation and helps the driver counter-steer with additional steering power .
WARNING
The counter-steering assistance in ESC can do no more than help the driver steer in difficult
situations. The driver must still control the vehicle. The vehicle does not steer by itself with
this feature!
NOTICE
If the ignition is off, the steering column lock will engage and the vehicle cannot be steered.
For this reason, you must leave the ignition on when going through an automatic car wash, for
example, so that the wheels will still steer.
Braking and parking
Introduction
Parking
About the brakes
Braking assistance systems
Switching Anti-Slip Regulation (ASR) on and off
Brake fluid
The braking assistance systems are the Anti-Lock Brake System (ABS), Brake Assist System
(BAS), Electronic Differential Lock (EDL), Anti-Slip Regulation (ASR) and Electronic Stability Control
(ESC).
More information:
Tailer towing 151
Tires and wheels
WARNING
Driving with bad brakes or worn brake pads can cause a collision and serious personal
injury.
If the symbol or lights up in the instrument cluster display, whether alone or
together with a text message, immediately contact an authorized Volkswagen dealer or
authorized Volkswagen Service Facility to have the brake pads checked and, if necessary,
replaced.
WARNING
Parking improperly can cause serious personal injury.
Never park the vehicle where the hot exhaust system or catalytic converter could ignite
Always apply the parking brake when parking your vehicle.
Improper use of the parking brake can seriously injure you and your passengers.
Never use the parking brake to slow down the vehicle when it is moving, except in an
emergency. The stopping distance is much longer because only the rear wheels are braked.
Always use the foot brake to stop the vehicle.
Never activate the throttle manually from the engine compartment when the engine is
running and the automatic transmission is in gear. The vehicle will start to move as soon as
the engine speed increases even if the parking brake is on.
Never leave children or anyone who cannot help themselves behind in the vehicle. They
could release the parking brake and move the gear selector lever or gear shift, which could
cause the vehicle to start moving. This can lead to a crash and serious personal injuries.
Always take the key with you when you leave the vehicle. The engine can be started and
vehicle systems such as the power windows can be operated, leading to serious personal
injury.
vehicle. The doors can be locked with the remote control vehicle key, trapping passengers in
the vehicle in an emergency. For example, depending on the time of year, people trapped in
the vehicle can be exposed to very high or very low temperatures.
NOTICE
Always be careful when you park in areas with parking barriers or high curbs. These vary in
height and could damage your bumper and related parts if the front of your vehicle hits a
barrier or curb that is too high while your are getting into or out of a parking spot. To help
prevent damage, stop before the tires of your vehicle touch a parking barrier or curb.

Lights up Possible cause or meaning Proper response
Stop!
Brake system malfunction. Get professional assistance immediately
244.
Lights up Possible cause or meaning Proper response
Stop!
Brake fluid level too low.
Check the brake fluid level

Together with ABS indicator light or
an authorized Volkswagen Service Facility.
: there is an ABS failure.
The vehicle brakes will work without ABS.
To begin driving, press the brake pedal to

The electronic parking brake is set.
release the electronic parking brake
If you believe that it is safe to do so,

immediately take the vehicle to an
authorized Volkswagen dealer or
Brake pads worn.
Check, and if necessary replace, all brake
pads.
Switch ignition off and on again. You may

have to drive a short distance.
Lights up: ESC malfunctioning or
switched off by the system.

Together with the ABS indicator light
or : ABS malfunction.
The vehicle brakes will work without ABS.
Drive a short distance at a speed of 10

12 mph (15 - 20 km/h). If the indicator light
Vehicle battery has been reconnected. stays on, see an authorized Volkswagen
dealer or an authorized Volkswagen
Service Facility
Automatically switch on ASR by turning the

ASR switched off.
ignition on and off.
Together with ESC indicator light :

ABS malfunction. See an authorized Volkswagen dealer or
Together with the , or The vehicle brakes will work without ABS.
warning light: ABS failure.
Together with a flashing or

warning light: there is an electronic
parking brake malfunction.
Depress the brake pedal to select a gear or

drive position.
Depress the brake pedal to release the
electronic parking brake .
Flashes Possible cause Solution
Stop!
Contact an authorized Volkswagen dealer
Electronic parking brake malfunction.
or authorized Volkswagen Service Facility
for assistance.
Take foot off accelerator pedal. Adapt

ESC or ASR regulating.
driving to road conditions.
The release button in the selector level

Engage the Automatic Shift Lock (ASL)
is not engaged in position.
WARNING
WARNING
Driving with bad brakes can cause a collision and serious personal injury.
If the brake warning light or does not go out, or comes on when driving, either the
brake fluid level in the reservoir is too low or there is a fault in the brake system. Stop the
vehicle as soon as you can do so safely and get expert assistance Brake fluid.
If the brake warning light or comes on at the same time as the ABS warning light
or , the ABS may not be working properly. This could cause the rear wheels to lock up
relatively quickly during braking. Rear wheel brake lock-up can cause loss of vehicle control.
If you believe the vehicle is safe to drive, drive slowly and very carefully to the nearest
authorized Volkswagen dealer or authorized Volkswagen Service Facility or other qualified
workshop and have the brake system inspected. Avoid sudden hard braking and steering.
If the ABS indicator light or does not go out, or if it comes on while driving, the ABS
system is not working properly. The vehicle can then be stopped only with the standard
brakes (without ABS). You will not have the protection ABS provides. Contact your
authorized Volkswagen dealer or an authorized Volkswagen Service Facility as soon as
possible.
If the symbol or lights up in the instrument cluster display, whether alone or
together with a text message, immediately contact an authorized Volkswagen dealer or
authorized Volkswagen Service Facility to have the brake pads checked and, if necessary,
replaced.
NOTICE
Fig. 142 In the lower center console: Button for the electronic parking brake.
Setting the electronic parking brake

You can engage the electronic parking brake any time the vehicle is not moving - even if the ignition is
switched off. Always engage the parking brake when you leave or park the vehicle.
Pull and hold the button fig. 142.

The parking brake is engaged when the indicator light in the button and in the instrument cluster
Braking and parking comes on.
Releasing the electronic parking brake

Press the button . At the same time, press the brake pedal firmly or press the accelerator pedal
lightly if the engine is running.
The parking brake is released when the indicator light in the instrument cluster Warning and
indicator lights goes out.
Releasing the electronic parking brake automatically when you start driving
The electronic parking brake releases automatically when you start driving if the driver's door is closed
and the driver's safety belt is buckled. With a manual transmission, you must also press the clutch
pedal all the way down before you start driving so the system recognizes that the parking brake should
be released.
Emergency braking function

Only use the emergency braking function in an emergency, when you cannot stop the vehicle using
the brake pedal !
Pull and hold the button to brake the vehicle hard. An audio warning signal will sound at the same
time.
To stop the braking maneuver, release the button or press the accelerator pedal.
WARNING
Improper use of the electronic parking brake can cause accidents and severe injuries.
Never use the parking brake to slow down the vehicle when it is moving, except in an
emergency. Braking distance is much longer, since only the rear wheels are braked. Always
use the foot brake.
Never press the accelerator pedal when a selector lever position or gear is engaged and
the engine is running. The vehicle could begin moving, even if the electronic parking brake is
set.
Never activate the throttle manually from the engine compartment when the engine is
running and the automatic transmission is in gear. The vehicle will start to move even if the
parking brake is engaged.
NOTICE
Even though the transmission is in Park (P), the vehicle may move a couple of inches (a few
centimeters) forwards or backwards if you take your foot off the brake pedal after stopping the
vehicle without first firmly setting the parking brake.
Vehicles with manual transmission: the electronic parking brake releases automatically when you
release the clutch pedal and press the accelerator pedal at the same time.
If the vehicle battery is dead, the electronic parking brake cannot be released. Use a jump-start
409.
You may hear noises when setting or releasing the electronic parking brake.
If the electronic parking brake is not used for a while, an automatic system check will occasionally
run when the vehicle is parked. This system check makes audible noises.
Parking
Please note legal regulations when stopping and parking your vehicle.
Parking the vehicle

Stop the vehicle on a suitable surface .

Hold the brake pedal down until the engine is switched off.
Apply the electronic parking brake to help prevent the vehicle from moving Electronic parking
brake.
For automatic transmissions: Shift the transmission into Park (P).
Switch off the engine and then take your foot off the brake.
Remove the vehicle key from the ignition.
If necessary, turn the steering wheel slightly to engage the steering column lock.
Shift manual transmission into 1st gear (on level ground or if pointed uphill) or reverse (if pointed
downhill) and let the clutch out.
Make sure all passengers and especially children leave the vehicle.
Take all vehicle keys with you when leaving your vehicle.
Lock the vehicle.
On hills
Before stopping the engine, turn the steering wheel so that, if the vehicle starts to roll, its front wheels
will roll into the curb:
Facing downhill, turn the front wheels so that they point toward the curb.
Facing uphill, turn the front wheels so that they point away from the curb.
WARNING
The vehicle exhaust system and the catalytic converter get very hot. They can cause fires and
Never park where the hot exhaust system could ignite flammable materials, such as
brush, leaves, dry grass, spilled fuel, etc.
NOTICE
Always be careful when you park in areas with parking barriers or high curbs. These vary in
height and could damage your bumper and related parts if the front of your vehicle hits a
barrier or curb that is too high while your are getting into or out of a parking spot. To help
prevent damage, stop before the tires of your vehicle touch a parking barrier or curb.
About the brakes

New brake pads do not provide full performance during the first 100 to 200 miles (200 to 300 km) and
must first be broken in . To some extent, you can make up for the somewhat reduced
performance by applying more pressure to the brake pedal. But, during the break-in period, the
stopping distance for hard braking and emergency braking will be longer until the brakes are fully
broken in. Avoid hard braking and situations that might require hard braking (such as following other
vehicles too closely) especially during the break-in period.
Brake pad wear depends mostly on operating conditions and the way the vehicle is driven. If you do a
lot of city and short-distance driving and/or have a sporty driving style, you should have the brake pads
checked by an authorized Volkswagen dealer or authorized Volkswagen Service Facility more often
than the regular service intervals.
Wet brakes (for example, after driving through water or washing the vehicle or after heavy rainfall) will
not brake as well. Stopping distances will be longer when brake discs are wet or, in winter, even icy.
Wet or icy brakes must be dried as soon as possible by carefully applying the brakes a couple of times
while traveling at a relatively high speed. Make sure nobody is behind you and that you do not
endanger yourself or others .
Brakes coated with road salt also react slower and need longer stopping distances. If there is salt on
the roads and you are not braking regularly, brake carefully and gently from time to time to remove any
salt coating from the brake disks and pads .
Brake disc corrosion (rust) and dirt buildup on the brake pads are more likely to occur if the vehicle is
not driven much or is driven only for short distances with little braking. If the brakes have not been
used and there is some rust on the discs, clean the brake discs and pads once in a while by carefully
braking a couple of times while driving at relatively high speed to help clean the brake discs and pads.
Make sure nobody is behind you and that you do not endanger yourself or others .
Brake system malfunction

If you brake and find that vehicle doesn't brake nearly as well as it used to (sudden increase in
stopping distance), a brake circuit may have failed. The brake warning light or will come on
and a message may appear in the instrument cluster display. If you believe the vehicle is safe to drive,
immediately take it to the nearest authorized Volkswagen dealer or authorized Volkswagen Service
Facility for repair. Drive slowly and very carefully, allow for the longer stopping distance, and be ready
to push longer and harder on the brake pedal to slow the vehicle down.
Brake booster
The brake booster works only when the engine is running. It increases the force on the brakes above
and beyond the pressure put on the brake pedal by the driver.
If the brake booster is not working, or if the vehicle has to be towed, you will have to push the brake
pedal harder to make up for the lack of booster assistance and the resulting longer stopping distance
.
WARNING
New brake pads do not provide maximum braking performance.
New brake pads do not have the best stopping power for the first 200 miles (320 km) and
must be broken in. You can compensate for the slightly reduced braking force by putting
more pressure on the brake pedal.
Drive with extra care while the new brake pads are being broken in. This reduces the risk
of collisions and serious personal injuries due to a loss of control over the vehicle.
Never follow other vehicles too closely or put yourself into other situations that might
require sudden, hard braking, especially when the brake pads have not been broken in.
WARNING
Overheated brakes will reduce the vehicle's stopping power and increase stopping distances
considerably.
When driving downhill, the brakes have to work especially hard and heat up quickly.
Before driving downhill, especially on hills that are long or steep, always reduce speed
and shift into lower gear (manual or automatic transmission). This will let the vehicle use
engine braking and reduce the load on the brakes. Otherwise, the brake system could
overheat and possibly fail. Only use the brakes when you need them to slow the vehicle down
more or to stop.
A damaged front spoiler or a nonstandard spoiler can reduce airflow to the brakes and
make them overheat.
WARNING
Wet brakes or brakes coated with ice or road salt react slower and need longer stopping
distances.
Carefully apply the brakes to test them.
Always dry brakes and clean off ice and salt coatings with a few cautious brake
applications when visibility, weather, road and traffic conditions permit.
WARNING
Driving when the brake booster is not working increases stopping distances and can cause
accidents and serious personal injuries.
Never let the vehicle coast when the engine is switched off.
If the brake booster is not working (such as when the vehicle is being towed), a lot more
pedal force is needed to slow down and stop.
NOTICE
Never ride the brakes by keeping your foot on the brake pedal when you do not want to
brake. Constant pressure on the brake pedal can make the brakes overheat. Riding the brakes
will substantially reduce braking performance, increase stopping distance, and can cause
complete brake system failure.
Before driving downhill, especially on hills that are long or steep, always reduce speed and
shift into lower gear (manual or automatic transmission). This will let the vehicle use engine
braking and reduce the load on the brakes. Otherwise, the brake system could overheat and
possibly fail. Only use the brakes when you need them to slow the vehicle down more or to
stop.
When the front brakes are serviced, you should have the rear brake pads inspected at the same
time. The wear of all brake pads should be visually checked regularly. The best way to check for brake
pad wear is to have your authorized Volkswagen dealer or authorized Volkswagen Service Facility
visually inspect the pads through the openings in the wheel rims or from underneath the vehicle. If
necessary, the wheels can be taken off for a more thorough inspection.
Braking assistance systems

The ESC, ABS, BAS, ASR, and EDL braking assistance systems work only when the engine is
running. These systems can significantly improve active driving safety.
Electronic Stability Control (ESC)

ESC helps to improve road holding and vehicle dynamics to help reduce the probability of skidding
and loss of vehicle control. It works only when the engine is running. ESC detects certain difficult
driving situations, including when the vehicle is beginning to spin (yaw) out of control. ESC then helps
you to get the vehicle back under control by selectively braking the wheels and/or reducing engine
power and by providing steering assistance to help hold the vehicle on the driver's intended course.
ESC has limitations. It is important to remember that ESC cannot overcome the laws of physics. It will
not always be able to help out under all conditions you may come up against. For example, ESC may
not always be able to help you master situations where there is a sudden change in the coefficient of
friction of the road surface. When there is a section of dry road that is suddenly covered with water,
slush or snow, ESC cannot perform the same way it would on a dry surface. If the vehicle
hydroplanes (rides on a cushion of water instead of the road surface), ESC will not be able to help
you steer the vehicle because contact with the pavement has been interrupted and the vehicle cannot
be braked or steered. During fast cornering, particularly on winding roads, ESC cannot always deal as
effectively with difficult driving situations as it can at lower speeds. When towing a trailer, ESC is not
able to help you regain control as it would if you were not towing a trailer.
Always adjust your speed and driving style to visibility, road, traffic, and weather conditions. ESC
cannot override the vehicle's physical limits, increase the available traction, or keep a vehicle on the
road if road departure is a result of driver inattention. Instead, ESC improves the possibility of keeping
the vehicle under control and on the road during extreme maneuvers by using the driver's steering
inputs to help keep the vehicle going in the intended direction. If you are traveling at a speed that
causes you to run off the road before ESC can provide any assistance, you may not experience the
benefits of ESC.
ESC includes and/or works together with the ABS, BAS, ASR, EDL, and XDL systems (see below).
ESC is switched on all the time and cannot be switched off.
Anti-Lock Brake System (ABS)

ABS helps to keep the wheels from locking up and helps to maintain the driver's ability to steer and
control the vehicle. This means the vehicle is less likely to skid, even during hard braking:
Push the brake pedal down hard and hold it there. Don't take your foot off the pedal or reduce the
force on the pedal!
Do not pump the brake pedal or let up on it!
Steer the vehicle while pushing down hard on the brake pedal.
ABS stops working if you release or let up on the brake.
When ABS is doing its job, you will notice a slight vibration through the brake pedal and hear a
noise. ABS cannot shorten the stopping distance under all conditions. The stopping distance may
even be longer, for instance, when driving on gravel or on newly fallen snow covering an icy or
slippery surface.
When driving forwards on loose surfaces, a special off-road ABS is automatically activated. In this
mode, the front wheels could lock briefly. This shortens the braking distance in off-road situations as
the wheels dig into loose surfaces. This occurs only when driving straight ahead. When the front
wheels are turned, the normal ABS is activated.
Brake Assist (BAS)

The Brake Assist System can help to reduce stopping distances. If you press the brake pedal very
quickly, BAS detects an emergency situation. It then very quickly builds up full brake system pressure,
maximizing braking power and reducing the stopping distance. This way, ABS can be activated more
quickly and efficiently.
Do not reduce pressure on the brake pedal! BAS switches off automatically as soon as you release or
let up on the brake.
Anti-Slip Regulation (ASR)

ASR reduces engine power directed to spinning wheels and adjusts power to the road conditions.
Even under poor road conditions, ASR can make it easier to get moving, accelerate, and climb hills.
ESC and ASR can help when driving on loose surfaces (such as gravel) and in deep snow. If you get
stuck in deep snow, you may be able to get going again by rocking the vehicle back and forth. ESC
and ASR recognize this special driving situation and automatically increase the speed of the front
wheels. Keep pressing the accelerator and let ESC increase the speed of the front wheels to help you
keep moving or get moving again.
Electronic Differential Lock (EDL and XDL)

EDL is applied during regular straight-line acceleration. EDL gently brakes a drive wheel that has lost
traction (spinning) and redirects the drive force to other drive wheels. In extreme cases, EDL
automatically switches off to keep the brake from overheating. As soon as the brake has cooled down,
EDL automatically switches on again.
XDL is an extension of the Electronic Differential Lock system. XDL does not react to drive wheel
slippage when driving straight ahead. Instead, XDL detects slippage of the inside front wheel during
fast cornering. XDL applies enough brake pressure to this wheel in order to stop the slippage. This
improves traction, which helps the vehicle stay on track.
WARNING
Driving fast on icy, slippery, or wet roads can lead to a loss of control and result in serious
personal injury for you and your passengers.
Always adjust your speed and driving style to road, traffic, weather, and visibility
conditions. Never let the additional safety that ESC, ABS, BAS, ASR, and EDL can provide
tempt you into taking extra risks.
Braking assistance systems cannot overcome the laws of physics and always prevent
loss of vehicle control. Slippery and wet roads are still dangerous even with ESC and the
other systems!
Driving too fast on wet roads can cause the wheels to lose contact with the road and
hydroplane. A vehicle that has lost road contact cannot be braked, steered, or controlled.
These systems cannot reduce the risk of accident, for example if you drive too fast for
conditions or if you do not keep your distance from the vehicle in front of you.
Although these systems are very effective and can help you control the vehicle in many
difficult situations, always remember that your vehicle handling control is limited by tire
traction.
When accelerating on a slippery surface, for example on ice and snow, depress the
accelerator carefully. Even with these systems, the wheels may start to spin, leading to a loss
of vehicle control.
WARNING
The effectiveness of ESC can be significantly reduced if other components and systems that
affect vehicle dynamics, including but not limited to brakes, tires, and other systems
mentioned above, are not properly maintained or functioning.
Always remember that vehicle alterations or modifications can affect the functioning of
the ABS, BAS, ASR, EDL and ESC systems.
Changing the vehicle suspension or using an unapproved tire/wheel combination can
change the way the ABS, BAS, ASR, EDL and ESC systems work and reduce their
effectiveness.
The effectiveness of ESC is also determined by the tires fitted Tires and wheels.
All 4 wheels must be equipped with identical tires in order for ESC and ASR to work properly.
Differences in the tread circumference of the tires can cause the system to reduce the engine power
when it is not expected.
If ABS is not working, ESC, ASR, and EDL will also not work.
You may hear noises when these systems are active.

Switching Anti-Slip Regulation (ASR) on and off
Fig. 143 In the center console: Button to manually switch ASR on and off.
The Electronic Stability Control (ESC) only works when the engine is running. This system includes
ABS, EDL and ASR.
ASR can be switched off by pressing button fig. 143 while the engine is running. Switch off ASR
only in situations where there is not enough traction, such as the following:
When driving in deep snow or on loose surfaces.
When rocking the vehicle back and forth when you are stuck.
Afterward, reactivate ASR by pressing the button again.
Brake fluid
Fig. 144 In engine compartment: Brake fluid reservoir cap
Brake fluid absorbs water from the air over time. Too much water in the brake fluid will damage the
brake system. Water also lowers the boiling point of the brake fluid. Too much water in the brake fluid
can cause vapor lock during heavy brake use or hard braking. Vapor lock reduces braking
performance, increases stopping distances and can even cause total brake failure. Your safety and
the safety of others depends on brakes that are working properly at all times .
Brake fluid specifications
Volkswagen has developed a special brake fluid that is optimized for the brake system in your
Volkswagen. Volkswagen recommends that you expressly use brake fluid that conforms to quality
standard VW Standard 501 14 for optimum performance of the brake system. Check the information
on the container for the brake fluid you want to use to make sure it meets the requirements for your
vehicle.
Brake fluid that complies with VW Standard 501 14 can be purchased from your authorized
If this special brake fluid is not available you may under these circumstances use another high-
quality brake fluid that complies with U.S. Federal Motor Vehicle Safety Standard (FMVSS) 116 DOT 4
.
Please note, however, that not all brake fluids that comply with U.S. Federal Motor Vehicle Safety
Standard FMVSS 116 DOT 4 have the same chemical composition. Some of these brake fluids can
contain chemicals that could, over time, degrade or damage internal parts of the vehicles brake
system.
Volkswagen therefore recommends that you use brake fluid that expressly complies with VW
Standard 501 14 for optimum brake system performance over the long term.
Brake fluid level

The fluid level in the transparent brake fluid reservoir must always be between the MIN and MAX
marking .
On some vehicles, engine components block the view of the brake fluid reservoir and make it
impossible to see the brake fluid level. If you cannot clearly see the brake fluid level in the brake fluid
reservoir, please see an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
The brake fluid level drops slightly when the vehicle is being used as the brake pads wear and the
brakes are automatically adjusted.
Changing brake fluid

Brake fluid must be changed according to the service schedule in your booklet Warranty and
Maintenance. Have the brake fluid checked by an authorized Volkswagen dealer or an authorized
Volkswagen Service Facility. Refill only with new brake fluid that meets the standards listed above.
WARNING
Brake failure and reduced brake performance can be caused by not having enough brake
fluid in the reservoir or by old or incorrect brake fluid.
Check the brake system and brake fluid level regularly.
Always change the brake fluid according to the service schedule in your
booklet Warranty and Maintenance.
Hard braking with old brake fluid may cause vapor lock. Vapor lock reduces braking
performance, increases stopping distances and can even cause total brake failure.
Always make sure that only the correct brake fluid is used. Only use brake fluid that
expressly conforms to VW Standard 501 14 or if it is not available, only use a high-quality
brake fluid that conforms to U.S. Standard FMVSS 116 DOT 4 requirements.
Using another brake fluid, or one that is not of high quality, can impair the function of the
brake system and reduce its effectiveness. If the container does not say that the brake fluid
complies with VW Standard 501 14, or U.S. Standard FMVSS 116 DOT 4, do not use it.
The brake fluid must be new.
WARNING
Brake fluid is poisonous.
To reduce the risk of poisoning, never use food, beverage or other non-original containers
to store brake fluid. Someone might be misled by the original label on the container, or by the
shape of the container, and drink the brake fluid. This could occur even if you relabel the
container as brake fluid.
Only store brake fluid in the closed, original container and keep it out of the reach of
children.
NOTICE
Brake fluid will damage vehicle paint, plastic parts and tires. Wipe any brake fluid off vehicle
paint and other vehicle parts immediately.
Brake fluid can pollute the environment. Brake fluid that has leaked out must be collected and
disposed of properly, following all applicable environmental regulations.
Introduction
Efficient driving style
Fuel-efficient driving
Fuel consumption, environmental impact, and wear and tear on engine, brakes and tires depend
mainly on the following 3 factors:
Your personal driving style.
External conditions (weather, road conditions).
Technical requirements.
You can reduce fuel consumption by up to 25% by using a few simple techniques and adjusting your
driving style.
WARNING
Always adjust your speed and the distance you keep between you and the vehicles ahead of
you to the road, traffic, weather, and visibility conditions.
Efficient driving style

Shifting faster
As a rule, the following applies: The higher gear is always the most efficient gear. The rule of thumb
for most vehicles is to drive in 3rd gear at 20 mph/30 km/h, 4th gear at 25 mph/40 km/h, 5th gear at
30 mph/50 km/h, and 6th gear at 36 mph/60 km/h.
If traffic and driving conditions permit, skipping gears when upshifting also saves fuel.
Do not run the gears up to their limit. Use 1st gear only to start moving and then smoothly shift into
2nd gear. Avoid kick-downs in vehicles with automatic transmissions.
Coasting
If you take your foot off the accelerator, fuel delivery to the engine is interrupted, which lowers fuel
consumption.
Therefore, when nearing a red stop light, for instance, allow the vehicle to coast without using the
accelerator. Press the clutch pedal and release it only if the vehicle moving too slowly or the coasting
distance is too long. The engine will then continue to run at idle.
In situations where the vehicle will be stopped for a longer period of time, such as at a railroad
crossing, physically switch off the engine.
Defensive driving and flowing with traffic

Frequent braking and acceleration increases fuel consumption significantly. Just by driving defensively
and keeping a sufficiently large distance away from the vehicle in front of you can make up for the
speed fluctuations caused by taking your foot off the accelerator. Active braking and accelerating is
then not necessarily required.
Calm and smooth driving

Consistency is more important than speed. The more smoothly you drive, the less fuel the vehicle
consumes.
When driving on the highway or freeway, a constant, moderate speed is more efficient and economical
than constantly accelerating and braking. Usually you can reach your destination just as quickly by
driving at a moderate, but steady speed.
The cruise control system can assist in maintaining a uniform driving style.
Moderate use of extra electrical loads

Comfort inside the vehicle is nice and important, but it is important to use them in an environmentally
conscious manner.
Some devices can increase fuel consumption when activated (examples):
Climate control system (air conditioner): If the air conditioner has to produce starkly contrasting
temperatures, it requires a large amount of energy, which is generated by the engine. The temperature
in the vehicle should therefore not be extremely different from that of the outside temperature. It may
be helpful to ventilate the vehicle before driving and then to drive a short distance with the windows
open. After that, switch on the air conditioner with the windows closed. Keep the windows closed when
driving at high speeds. Open windows increase fuel consumption.
Switch off seat heating once it has served its purpose.
Switch off the rear window defroster as soon as the windows are free of fog and ice.
Additional factors that increase fuel consumption (examples):

Malfunctioning engine control.
Driving in the mountains.
Towing a trailer.
NOTICE
Never let the vehicle coast or roll down a hill in Neutral (N), especially when the engine is not
running. The transmission will not be lubricated and will be damaged.
Fuel-efficient driving
Fig. 145 Fuel consumption in mpg at 2 different outside air temperatures.
Fig. 146 Fuel consumption in l/100 km at 2 different outside air temperatures.
Driving defensively and economically can easily reduce fuel consumption by 10 to 15%.
The vehicle consumes the most fuel when accelerating. Defensive driving requires less braking and
therefore less acceleration. If possible, coast the vehicle to a stop, for example, when you can see that
the next traffic light is red or is about to turn red.
Avoid traveling short distances

A cold engine consumes significantly more fuel immediately after starting. It takes a few miles (km)
before the engine is warmed up and fuel consumption is stabilized.
To reduce fuel consumption and the emission of pollutants effectively, the engine and catalytic
converter must reach their optimal operating temperature. Critical in this context is also the outside
air temperature.
fig. 145 and fig. 146 display the varying fuel consumption rates for the same distance driven,
once at +68 F (+20 C) and once at +14 F (-10 C).
Therefore, avoid driving short distances unnecessarily and consolidate routes.
Under the same conditions, the vehicle consumes more fuel in winter than in summer.
Letting the engine run to warm up is not only illegal in some places, but also technically not
necessary and wastes fuel.
Adjust the tire pressure
The proper tire pressure helps reduce rolling resistance as well as fuel consumption.
When purchasing new tires, always make sure that the tires are optimized for lower rolling resistance.
Use low viscosity engine oil

Fully synthetic, low viscosity engine oils that expressly comply with Volkswagen oil quality standards
reduce fuel consumption. Low viscosity engine oils reduce the frictional resistance on the engine and
are distributed more evenly and quickly, particularly when cold-starting the engine. The effect is
particularly apparent in vehicles that frequently travel short distances.
Always ensure the right engine oil level is maintained and keep to the scheduled service intervals
(engine oil changes).
Make sure the engine oil that you purchase expressly complies with Volkswagen oil quality standards
and is the oil approved by Volkswagen for your vehicle.
Avoid unnecessary weight

The lighter the vehicle, the more economical and eco-friendly it will be. For example, an extra 220 lbs
(100 kg) of weight increases fuel consumption by up to 1 pint per 60 miles (0.3 l/100 km).
Remove all unnecessary items and unnecessary dead weight from the vehicle.
Remove unnecessary aftermarket components

The more aerodynamic the vehicle, the less fuel it will consume. Aftermarket components such as
bicycle racks reduce its aerodynamic performance.
Therefore, remove unnecessary structures and unused rack systems, particularly if planning to drive at
higher speeds.
Cruise control system (CCS)
Introduction
Cruise control operation
The cruise control system (CCS) helps maintains an individually stored constant speed when driving
above 12 mph (20 km/h).
The CCS slows down the vehicle only by reducing the flow of fuel to the engine, not by braking .
More information:
Shifting
WARNING
Using the cruise control when it is not possible to drive safely at a constant speed can be
dangerous and can lead to an accident and serious personal injuries.
Never use cruise control when driving in heavy or varying traffic or when you cannot keep
a safe distance between you and the vehicles ahead of you.
Never use cruise control on steep, winding, or slippery roads (such gravel roads, wet
roads, or snowy or icy roads) or on roads with standing water.
Never use cruise control when driving off-road or on unpaved roads.
Always adjust your speed and the distance you keep between you and the vehicles ahead
of you to the road, traffic, weather, and visibility conditions.
To help prevent unintended operation of cruise control, switch the system off when it is
not being used.
It is dangerous to use the Resume feature when the previously set speed is too high for
the existing road, traffic, or weather conditions.
When going downhill, the cruise control may not be able to maintain a constant speed.
The vehicle will speed up because of its own weight. Downshift and/or use the foot brake to
slow the vehicle.
Fig. 147 In the instrument cluster display: Cruise control status indications.
Display
Different cruise control versions are available. The stored speed is shown in the instrument cluster
display on some equipment versions.
Status fig. 147
(A) Cruise control temporarily deactivated. Stored speed in small numbers.
(B) System malfunction. See an authorized Volkswagen dealer or an authorized Volkswagen
Service Facility.
(C) Cruise control activated. No speed stored in memory.
(D) Cruise control is active. Stored speed in large numbers.
Indicator lights
Lights up Possible cause
Cruise control is regulating the speed.
WARNING
NOTICE
Cruise control operation
Fig. 149 On the left side of the steering column: Cruise control buttons and switches.
In order to: You must: fig. 149 Result:
Switch on cruise control. Move switch (2) to position. System is switched on, but does
not regulate vehicle speed until
a speed is set.
Set cruise control to Press button (3) . Current vehicle speed is set;
current vehicle speed. cruise control helps to maintain
this speed.
Temporarily deactivate Move switch (2) to the position. Cruise control is temporarily
cruise control. OR: depress the brake or clutch pedal. deactivated. The speed is still
stored in the memory.
Resume speed stored in Press button (1) . Cruise control resumes speed
cruise control. previously set.
Increase set speed Press the button (1) briefly to The vehicle will accelerate until
(while cruise control is increase the set speed in small steps. the new higher speed is reached
actively controlling briefly to increase the stored speed in and saves the new higher speed
vehicle speed). small steps of 1 mph (1 km/h) each. in the memory.
Press and hold button (1) to increase

the set speed until the higher desired
speed is reached and button is
released.
Reduce set speed (while Press the button (3) Cruise control will slow the
cruise control is actively briefly to decrease the stored speed in vehicle down without braking by
controlling vehicle small steps of 1 mph (1 km/h) each. reducing the flow of fuel to the
speed). engine until the new lower
Press and hold button (3) to reduce speed is reached and saves the
the set speed until the lower desired new lower speed in the memory.
speed is reached and the button is
released.
Switch off cruise control. Move switch (2) in the position. System is switched off. The set
speed is deleted.
Driving downhill with cruise control

If cruise control cannot maintain constant speed while driving downhill, slow the vehicle with the foot
brake and downshift if necessary.
Automatic deactivation
Cruise control speed regulation is automatically deactivated or temporarily interrupted:
If the system detects an error that could affect the function of the cruise control.
If the vehicle has accelerated and goes faster than the stored speed for a longer time.
If the brake or clutch pedal is depressed.
If the vehicle shifts gear (manual transmission).
If an airbag deploys.
Rear Assist
Introduction
Operation
Parking
There is a camera in the luggage compartment lid to assist the driver while backing up or
maneuvering. The camera image is shown together with the orientation lines projected by the system
on the screen of the factory-installed radio or navigation system.
Rear Assist may take a few seconds to bring up the camera image.
More information and warnings:

Exterior views
booklet Radio or booklet Navigation system
WARNING
Rear Assist is not able to give you a clear and undistorted view of all areas behind the
vehicle.
The camera has blind spots in which it cannot detect people and objects.
Always be careful and look around you when parking. The camera cannot show people,
animals, and objects in certain situations. Watch out for small children and animals in
particular.
Due to the screen resolution or in low-light conditions, the camera may not pick up thin
posts, chain-link fences and similar fences, and other objects, or it may not show them
clearly.
The camera lens enlarges and distorts the field of vision and causes objects on the screen
to appear altered and imprecise.
Always keep the camera lens clean and free of snow and ice; do not cover the lens.
WARNING
Rear Assist technology cannot overcome the laws of physics and the limits of the system.
Careless or unintentional use of Rear Assist may result in accidents and severe injuries.
Always adjust your speed and driving style to road, traffic, weather, and visibility
conditions.
Always keep an eye on the parking direction and the vehicle surroundings. The front of
the vehicle swings out more than the rear of the vehicle.
Never pay so much attention to the graphics shown on the screen that you fail to notice
what is going on around you.
Always watch for people, especially small children, animals, and objects, because the
camera may not always be able to detect them.
The system may not be able to clearly show everything behind the vehicle.
Use Rear Assist only when the luggage compartment lid is completely closed.
NOTICE
The camera shows only two-dimensional images on the screen. Due to the lack of depth of
field, it may be difficult or impossible to identify protruding objects or recesses in the road, for
example.
Things like thin rods, fences, posts, and trees may not be detected by the camera and could
damage the vehicle.
Operation
Fig. 150 In the luggage compartment lid: Location of the Rear Assist camera.
Fig. 151 Rear Assist display.
In order to Operation
Automatically activate display: Shift into Reverse when the ignition is switched on or the
engine is running.
Press a function selection button on the radio or the

navigation system booklet Radio or
Manually deactivate display: booklet Navigation system.
OR: Switch off the ignition. The Rear Assist display turns off
after a few seconds.
In order to Operation
Switch off display by shifting out of The display switches off after about 10 seconds.
Reverse:
Deactivate display by driving Drive forward faster than about 10 mph (15 km/h).
forward:
Special considerations
1) Do not use Rear Assist in the following situations:
When an incorrect or unclear image is displayed, such as when there is poor visibility or the lens is
dirty.
If the area behind the vehicle cannot be seen clearly or completely.
If the rear of the vehicle is heavily loaded.
When the luggage compartment lid is open.
If the driver is not familiar with the system.
If the position or angle of the camera has changed, such as after a rear-end collision. Have the
system checked by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility.
2) Examples of optical distortion by the camera
The Rear Assist camera displays only two-dimensional images. Recesses and protruding objects on
the ground or protruding parts on other vehicles are difficult or impossible to identify due to the lack
of depth of field.
Objects or another vehicle may seem closer or farther away on the screen than they really are:
When driving from a level surface onto an upward or downward slope.
When driving up or down a slope onto a level surface.
If the rear of the vehicle is heavily loaded.
When approaching protruding objects. These objects can disappear from the field of view when
backing up.
Cleaning the camera lens

Keep the camera lens clean and free of snow and ice:
Engage the parking brake.
Select the reverse gear.
Wet the camera lens with a commercially available alcohol-based glass cleaner and clean with a
dry cloth .
Remove snow with a brush.
Remove ice with deicer spray .
NOTICE
Never use abrasive cleaning agents to clean the camera lens.
Never remove snow or ice on the camera lens with warm or hot water. This can damage the
camera lens.
Volkswagen recommends practicing parking with Rear Assist in a safe place with little or no
traffic or in a parking lot under good visibility and weather conditions in order to familiarize yourself
with the system, the orientation lines and the way they work.
Rear Assist does not work when the luggage compartment lid is open.
Parking
Fig. 152 On the screen: Static orientation lines for the parking space behind the vehicle.
Orientation lines overview

The yellow area displayed stops about 2 yards (meters) behind the vehicle on the road.
Meaning of the orientation lines on the screen7 fig. 152.

(1) Safety distance: area up to about 16 inches (40 cm) behind the vehicle on the road.
(2) Projection of the vehicle (widened somewhat) toward the rear. The middle markers are about
40 inches (1 meter) behind the vehicle on the road.
Parking
Position the vehicle in front of a parking space and shift into Reverse.
Slowly back up and steer so that the yellow orientation lines lead into the parking space (2).
Align the vehicle in the parking place so that the yellow orientation lines are parallel with the
parking space.
7
All distances of the orientation lines refer to a vehicle that is on a level surface.
Heating and air conditioning
Introduction
Manual controls
Climatronic controls
Operation
Air vents
Air recirculation
Manual air conditioning (AC) and Climatronic

Your vehicle is equipped either with a Manual A/C climate control system or with a Climatronic
climate control system. On vehicles with Climatronic climate control, system status messages will
appear briefly in the Climatronic display and/or on the factory-installed Radio system or Radio &
Navigation system.
The temperature units (Fahrenheit or Celsius) in the factory installed radio or navigation system
screen can be changed in the Settings menu in the Premium instrument cluster display in
appropriately equipped vehicles.
The dust and pollen filter

The dust and pollen filter with an activated carbon insert reduces the entry of pollutants into the
passenger compartment.
The dust and pollen filter must be replaced at the intervals recommended in booklet Warranty and
Maintenance so that the air conditioner can work properly.
If the effectiveness of the filter decreases prematurely due to operating the vehicle where the outside
air is heavily polluted, the dust and pollen filter should be replaced more frequently than indicated.
More information:
Exterior views
Seat functions
Windshield wiper and washer
WARNING
Poor visibility increases the risk of collisions and other accidents that cause serious
personal injuries.
Always make sure all windows are clear of ice, snow and condensation for good visibility
to the front, sides, and rear.
Maximum heating output and defrosting performance are not possible until the engine has
reached operating temperature. Wait until you have good visibility before driving off.
Always make sure you know how to properly use the heating and ventilation systems as
well as the rear window defroster that you will need for good visibility.
Never use air recirculation for long periods of time. When the air conditioner is off and
recirculation mode is on, condensation can quickly form on the windows and greatly reduce
visibility.
Always switch off recirculation mode when it is not needed.
WARNING
Stale air causes driver fatigue and reduces driver alertness, which can cause accidents,
collisions and serious personal injury.
Never switch off the fan for a long period of time and never use air recirculation a long
period of time because no fresh air will enter the passenger compartment.
NOTICE
If you think the air conditioner is not working properly or may be damaged, switch it off to
help prevent more damage. Have the air conditioner checked by an authorized Volkswagen
Air conditioner repair requires specialized knowledge and special tools. Volkswagen
recommends that you see an authorized Volkswagen dealer or an authorized Volkswagen
Service Facility.
Do not smoke when air recirculation is switched on. Smoke drawn into the ventilation
system can leave residue on the evaporator and on the dust and pollen active carbon filter,
resulting in permanent odors whenever the air conditioner is switched on.
If the air conditioner is switched off, the fresh outside air will not be dehumidified. To help keep
the windows from fogging over, Volkswagen recommends leaving the air conditioner (compressor)
switched on. Press the AC button. The indicator light in the button must come on.
When it is very hot and humid outside, water condensation can drip from the air conditioner
evaporator and form a puddle under the vehicle. This is normal and does not indicate a leak.
Keep the air intake slots in front of the windshield free of ice, snow and leaves in order to
maintain proper functioning of the heating and ventilation systems.
Maximum heating output and defrosting performance are not possible until the engine has
reached operating temperature.
battery has been replaced may change or delete system settings (including time, date, personal
convenience settings and programming). Check the settings and correct as necessary once the
vehicle battery has built up a sufficient charge.
Manual controls
Fig. 153 In the center console: Manual AC controls.
Press the corresponding button to switch a function on or off. If a function is switched on, an indicator
light in or under the button comes on. To switch off a function, press the button again.
Button /
Knob More information: Manual AC fig. 153.
Temperature
(1) Turn knob to set the desired temperature. The position provides maximum
cooling output. Recirculation mode and the cooling system switch on automatically.
...
Fan (2)
: Setting 0: the fan and manual A/C are switched off.
Setting 6: highest fan speed.
,
Air
distribution Direct airflow by turning knob to any setting (continuously adjustable).
(3)
Defog / defrost button: Airflow is directed to the windshield. Recirculation mode

switches off automatically in this position. Increases the fan speed to clear the
windshield as quickly as possible. The cooling system switches on automatically to
dehumidify the air.
Air distribution to the air vents in the instrument panel.
Air distribution to the instrument panel and in the footwells.

Button /
Knob More information: Manual AC fig. 153.
Air distribution in the footwells.
Air distribution to the windshield and footwells.
Rear window defroster: Functions only when the engine is running and switches off
automatically after 10 minutes or less.
Air recirculation
or Buttons for seat heating
Press the button to switch the air conditioner on or off.
Turn knob (1) to the position for maximum cooling output. The air recirculation
and air conditioning switches on automatically.
Switching off. Turn fan switch to position 0.
WARNING
Stale air causes driver fatigue and reduces alertness, which can cause accidents, collisions,
Never switch off the fan for a long time, because no fresh air will enter the passenger
compartment.
Climatronic controls
Fig. 154 In the center console: Climatronic controls.
Press the corresponding button to switch a function on or off. If a function is switched on, an indicator
light in or under the button comes on. To switch off a function, press the button again.
Button /
Knob More information: Climatronic fig. 154.
Temperature
(1) Left and right sides of the vehicle can be set to different temperatures. Turn the knob
to set the temperature. The temperature is displayed on the outer ring.
...
Fan (2)
The fan speed is automatically controlled depending on the vehicle speed in order to
help prevent unnecessary noise. The fan can also be adjusted manually.
,
Air
Air flow is automatically adjusted to a comfortable level. It can also be manually
distribution
adjusted with button (3).
(3)
Displays (4) Left-side and right-side digital temperature displays.
Defog / defrost button: The incoming outside air is directed to the windshield, and air
recirculation is automatically switches off. To defrost the windshield as quickly as
possible, humidity is removed from the air at temperatures above about 35 F
(+1.5 C), and the blower is set to a high speed.
Air distribution to the air vents in the instrument panel.
Air distribution in the footwells.
Air is directed upward.
Rear window defroster: Functions only when the engine is running and switches off
automatically after 10 minutes or less.
Manual and automatic air recirculation
or Buttons for seat heating
Press the button to switch the air conditioner on or off.
Push button for maximum air conditioner cooling. The air recirculation and air
conditioning switches on automatically and the vents direct air in the position.
Applies the temperature settings for the driver side to the passenger side: If the
indicator light in the button comes on, the temperature settings for the driver side
also apply to the passenger side.
Press the button or turn the temperature knob for the passenger side to set a different
temperature for the passenger side. The indicator light in the button goes out.
Automatic temperature control, fan speed and air distribution.

Button /
Knob More information: Climatronic fig. 154.
Press the button: The AUTO High (high fan speed) function switches on. The right
indicator light in the button comes on.
Press the button again: The AUTO Low (low blower speed) function switches on. The
left indicator light in the button comes on.
Switching off. Press button or set the fan manually to 0. If the system is switched
off, an indicator light in the button lights up.
WARNING
Stale air causes driver fatigue and reduces alertness, which can cause accidents, collisions,
Never switch off the fan for a long time, because no fresh air will enter the passenger
compartment.
Operation
The air conditioner works only when the ignition is switched on. The cooling system for the passenger
compartment works only when the engine is running and the fan is on.
The air conditioner is most efficient when the windows and the power sunroof are closed. If the vehicle
is not moving and the passenger compartment becomes very hot due to sunlight, briefly opening the
windows and the power sunroof may speed up the cooling process.
Keep the air intake slots in front of the windshield free of ice, snow and leaves so that the heating and
ventilation systems can work properly.
Settings for optimum visibility

When you switch on the cooling system, both the temperature and humidity in the vehicle are reduced.
This will help make passengers feel more comfortable and help keep the windows from fogging up.
For manual AC
Switch off air recirculation Air recirculation.

Set fan to 1 or 2.
Turn the temperature knob to the center position.
Open and adjust all air vents in the instrument panel Air vents.
Turn the air distribution knob to the desired setting.
Push the button to switch the air conditioning system on. The indicator light in the button
comes on.
For Climatronic
Press the button.
Set temperature to +72 F (+22 C).
Open and adjust all air vents in the instrument panel Air vents.
Climatronic: Changing the temperature unit on the factory-installed Radio or Radio &
Navigation system display
For vehicles with a Premium instrument cluster: The inside and outside temperatures can be displayed
in either Fahrenheit (F) or Celsius (C). Select Units
Press the and buttons at the same time to toggle between Celsius and Fahrenheit and vice
versa.
For vehicles with a Premium instrument cluster: The inside and outside temperatures can be displayed
in either Fahrenheit (F) or Celsius (C). Select Units in the instrument cluster display using in the
Settings main menu Volkswagen Information System.
Heating
Maximum heating output and defrosting performance are not possible until the engine has reached
operating temperature.
Air conditioner does not work

The air conditioner may not switch on for one of the following reasons:
The engine is not running.
The fan is switched off.
The air conditioner fuse has blown.
The outside air temperature is colder than about +38 F (+3 C).
The air conditioner compressor has been temporarily switched off due to excessive engine coolant
temperature.
There is another malfunction in the vehicle. Have the air conditioner checked by an authorized
Special considerations
When it is very hot and humid outside, water condensation can drip from the air conditioner
evaporator and form a puddle under the vehicle. This is normal and does not indicate a leak.
The climate control system adjusts the passenger compartment temperature as fast as possible
considering the outside temperature.
Due to residual moisture in the air conditioner, the windshield may fog up after the engine is
started. Switch on the windshield defroster to help evaporate the condensation as quickly as possible.
The air coming out of the vents flows through the passenger compartment and out through vents
below the rear window. Do not cover these slots with clothing or other things.
Air vents
Fig. 155 In the instrument panel: Air vents.
Air vents
To help ensure sufficient heating, cooling and ventilation in the passenger compartment, never close
the air vents completely fig. 155 (1).
To open and close the air vents , turn the thumb wheel (close-up) in the desired direction. When
the thumbwheel is turned all the way toward the , the air vent is closed.
Use the lever on the vent grille to adjust the airflow direction.
Additional, non-adjustable air vents (2) are located in the door pillars and the instrument panel, in the
footwells, as well as in the rear area of the passenger compartment.
NOTICE
Do not place food, medications, or other heat-sensitive things in front of the air vents. Food,
medications, and other things that are sensitive to heat or cold can be damaged or made
unusable by the air flow from the vents.
The air coming out of the vents flows through the passenger compartment and out through vents
below the rear window. Do not cover these slots with clothing or other things.
Air recirculation
General information
There are different types of air recirculation:
Manual air recirculation (manual AC).
The left indicator light under the button comes on: manual air recirculation is
switched on (Climatronic).
There are different types of air recirculation:
The right indicator light under the button comes on: automatic air recirculation is
switched on (Climatronic).
The air recirculation mode helps prevent outside air from entering the vehicle interior.
In very hot or cold outside temperatures, temporarily switch to manual air recirculation in order to cool
or heat the vehicle interior faster.
For safety reasons, air recirculation is switched off when the button is pressed, and the air
distribution switch is turned to .
Switching manual air recirculation on and off

Switching on: Press the button repeatedly until the indicator light in the button comes on.
Switching off: Press the button repeatedly until the indicator light in the button goes out.
Switching manual air recirculation on and off

Switching on: Press the button repeatedly until the left indicator light under the button comes on.
Switching off: Press the button repeatedly until the indicator light under the button goes out.
Automatic air recirculation

In the setting, fresh air enters the passenger compartment. If the system detects an increased
concentration of pollutants in the outside air, it automatically switches to air recirculation. As soon as
the pollutant level is back in the normal range, air recirculation is switched off.
Unpleasant odors cannot be detected by the system.
Air recirculation is not automatically activated under the following outside temperatures and
conditions:
The air conditioning is on (indicated by the light in the button) and the outside air temperature
is colder than about +38 F (+3 C).
The cooling system and the windshield wiper are switched off and the outside air temperature is
cooler than about +50 F (+10 C).
The cooling system is switched off, the outside air temperature is cooler than about +59 F
(+15 C), and the windshield wiper is switched on.
Switching automatic air recirculation on and off

Switching on: Press the button repeatedly until the right indicator light under the button comes on.
Switching off: Press the button repeatedly until no indicator light under the button is on.
It is not possible to activate automatic air recirculation when the outside air temperature is colder than
about +38 F (+3 C).
Temporarily deactivating the automatic air recirculation

Press the button once to switch to air recirculation temporarily in the event of unpleasant
odors. The left indicator light comes on.
Press the button again after more than 2 seconds to resume automatic air recirculation. The
right indicator light comes on.
WARNING
Stale air causes driver fatigue and reduces driver alertness, which can cause accidents,
collisions and serious personal injury.
Never use air recirculation mode over an extended period of time, since no fresh air will
enter the passenger compartment.
When the air conditioner is off and recirculation mode is on, condensation can quickly
form on the windows and greatly reduce visibility.
Always switch off recirculation mode when it is not needed.
NOTICE
Do not smoke when air recirculation is switched on. Smoke drawn into the ventilation system
can leave residue on the evaporator and on the dust and pollen active carbon filter, resulting in
permanent odors whenever the air conditioner is switched on.
Climatronic: When backing up and while the automatic wiper/washer is operating, air
recirculation is briefly activated to help keep exhaust fumes from getting into the passenger
compartment.
Refueling
Introduction
Indicator lights and fuel gauge
Refueling
Fuel capacities
Refueling checklist
The fuel filler flap is located on the rear right side of the vehicle.
More information:
Exterior views
Fuel
WARNING
Improper refueling or handling of fuel is dangerous and can cause fire, explosion, and severe
burns.
Always make sure that the fuel filler cap is screwed on all the way. This helps keep fuel
from spilling out or evaporating.
Fuel is highly flammable and explosive; it can cause severe burns and other severe
injuries.
Failure to shut the engine off while refueling and/or to insert the pump nozzle all the way
into the fuel filler neck can cause fuel to overflow and to spray out. Fuel spray and
overflowing fuel are dangerous because they can cause fire and serious personal injury.
During fueling, the engine and the ignition must be switched off for safety reasons.
Never use a cellular telephone, CB radio, or other radio equipment while refueling. The
electromagnetic radiation can cause sparks that can ignite fuel vapors and cause a fire.
Never get back into your vehicle while refueling. If in exceptional circumstances you must
get back in your vehicle while refueling, make certain that you close the door and touch metal
to discharge static electricity before touching the filler nozzle again. This helps avoid the
build-up of static electricity, which can cause sparks that can ignite fuel vapors released
during refueling.
Never smoke or have an open flame (or sparks, cigarettes, or other smoldering objects)
anywhere in or near your vehicle when refueling or filling a portable fuel container.
Follow all safety instructions and procedures that apply at the service station where you
refuel.
Never spill fuel in the vehicle or the luggage compartment.
WARNING
Even if empty, portable fuel containers can leak and cause a fire and serious personal
injuries, especially in a crash.
For your safety, we strongly recommend that you do not travel with a portable fuel
container in your vehicle.
If, under exceptional circumstances, you must transport a portable fuel container, please
observe the following:
Never fill a portable fuel container while it is anywhere in or on the vehicle (for
example, in the luggage compartment or on the rear hatch). Static electricity can build up
while filling and can ignite fuel vapors, causing a fire.
Always place a portable fuel container on the ground before filling. Never spill fuel
inside the vehicle or luggage compartment. Fuel vapors are highly flammable.
Always keep the filler nozzle completely inside the portable container before and
during filling.
If filling a portable container made of metal, the filler nozzle must always be in contact
with the container. This will help prevent static electricity from discharging and causing a
fire.
Always observe local and state or provincial laws about the use, storage, and
transportation of portable fuel containers.
Make certain that the portable fuel container meets industry standards, such as
ANSI/ASTM F852-86.
NOTICE
Remove fuel spills from the vehicle immediately to help prevent damage to the paint, tires,
and wheel housings.
Refueling with diesel fuel when your vehicle has a gasoline engine can cause very serious
and expensive engine and fuel system damage that is not covered by any Volkswagen Limited
Warranty.
If you put any amount of incorrect fuel in the fuel tank, do not start the engine under any
circumstances. Immediately contact the nearest authorized Volkswagen dealer or authorized
Volkswagen Service Facility for assistance. These fuels contain substances that can severely
damage the fuel system and the engine if the engine is started.
Fuels can pollute the environment. Spilled fuel must be collected and disposed of properly,
following all applicable environmental regulations.
There is no emergency release for the fuel filler flap. Contact an authorized Volkswagen dealer or
an authorized Volkswagen Service Facility for assistance.
Indicator lights and fuel gauge
Fig. 156 Fuel gauge in the instrument cluster: A Refuel warning zone.
Lights Gauge position Possible cause or meaning

Proper response
up fig. 156
Fuel tank almost empty.

Refuel warning zone
Running on reserve 276. Time to refuel .
Fuel filler cap not properly Stop and close fuel filler cap
closed. properly.
Fuel filler cap not properly closed

If the indicator light comes on or you see a text message in the instrument cluster display indicating
that the fuel filler cap is not properly closed, stop the vehicle in a safe place and switch off the engine
and the ignition.
Open the fuel filler flap and take the fuel filler cap off the filler neck. Then put the fuel filler cap back on
the filler neck and screw it on clockwise until you clearly hear a clicking sound. Close the fuel filler flap.
After switching on the ignition, the indicator light may stay on or the text message may still appear
in the instrument cluster display, even if the fuel filler cap is now properly closed. This is normal and no
reason to take your vehicle in for service.
If, however, the malfunction indicator light also comes on, drive to your nearest authorized
Volkswagen dealer or authorized Volkswagen Service Facility and have the fuel system and the
engine checked.
WARNING
Driving with a fuel tank that is almost empty can lead to stalling in traffic, a collision, and
serious personal injuries.
When the fuel tank is almost empty, fuel supply to the engine can be interrupted,
especially when driving over bumps, across slopes, and up and down hills.
Steering and braking assistance as well as ESC and related systems will not work if the
engine sputters or stalls due to lack of fuel.
Always refuel when the tank is 1/4 full to reduce the risk of running out of fuel and stalling
in traffic.
NOTICE
Never drive until the fuel tank is completely empty. The irregular fuel supply can cause the
engine to misfire. This allows unburned fuel to get into the exhaust system and damage the
catalytic converter.
The small arrow next to the gas pump symbol in the fuel gauge shows the side of the vehicle with
the fuel filler flap.
Refueling
Fig. 157 Right rear side of vehicle: Opening the fuel filler flap.
Fig. 158 Fuel cap placed on the open fuel filler flap.
Before refueling, always switch off the engine, the ignition, and all mobile phones, and leave them
switched off until refueling is complete.
Opening the fuel filler cap

Unlock the vehicle from the outside with the vehicle key or press the central locking button in driver
door to unlock the vehicle from the inside Power locking and closing system.
The fuel filler flap is located at the right rear of the vehicle.
Press on the back part of the fuel filler flap fig. 157 (arrow) and fold open.
Unscrew fuel cap counterclockwise and remove. Use the receptacle on the filler flap hinge to hold
the cap while refueling fig. 158.
Refueling
The correct fuel grade for your vehicle Fuel is listed on a sticker on the inside of the fuel filler flap .
The fuel tank is full when the automatic filler nozzle pump switches off the first time .
Do not try to add fuel after the pump stops! Topping off the tank in this way may fill the expansion
space that the tank needs and cause fuel to overflow, for example, if it gets warmer outside.
Closing the fuel filler cap

Screw the fuel cap clockwise onto the fuel filler neck until you hear it click into place.
Close the fuel filler flap until you hear it latch shut. The fuel filler flap must be flush with the vehicle
body.
WARNING
Spilled fuel can cause fires, explosions, burns, and other severe injuries.
Always stop refueling once the pump nozzle switches off so that the tank does not
overflow.
NOTICE
Remove fuel spills from all vehicles surfaces immediately to help prevent damage to the paint,
tires, and wheel housings.
Fuel spills may pollute the environment.
Fuel capacities
Fuel tank capacity
About 16,8 gallons (63.5 liters), including about 2 gallons (7.5 liters) reserve.
Refueling checklist
The engine compartment of any motor vehicle is a hazardous area. Never do any work on the engine
or in the engine compartment unless you
- know exactly how to carry out the job,
- have the correct technical information and the proper tools and supplies, and
- are familiar with the necessary safety precautions Working in the engine compartment.
Checklist
If you are uncertain in any way, have the work done by an authorized Volkswagen dealer or
authorized Volkswagen Service Facility. Serious personal injury may result from improperly performed
work. Make sure that you check the following items regularly. The best thing is to check them every
time you refuel:
Windshield washer fluid level Windshield wipers and washer
Engine oil level Engine oil
Engine coolant level Engine coolant
Brake fluid level Braking and parking
Tires and wheels Tires and wheels

Vehicle lighting necessary for driving safety:
Turn signals
Parking lights, low beams and high beams
Taillights
Brake lights
License plate light
Information regarding replacing light bulbs Replacing light bulbs.
WARNING
Disregarding the safety-related checklist may lead to accidents and injuries.
Please note and follow the points listed in the checklist.
Fuel
Introduction
Gasoline
Gasoline additives
The correct fuel grade for your engine is shown on a sticker located on the inside of the fuel filler flap
fig. 158.
Bad or poor quality fuel reduces operating performance, efficiency and service life of the engine. If you
notice any symptoms like rough engine idle or performance or bucking, immediately reduce the
vehicle speed, accelerate slowly and keep the engine speed in the middle of the rpm range. Avoid
high rpm and rapid acceleration. If these symptoms should appear right after refueling, switch off the
engine. In both cases contact an authorized Volkswagen dealer or an authorized Volkswagen Service
Facility to have the engine checked.
More information:
booklet Warranty and Maintenance
Refueling
Engine control and exhaust system
WARNING
Improper refueling or handling of fuel can cause fire, explosion, and severe burns.
Fuel is highly explosive and flammable and can cause severe burns and other injuries.
Heed applicable safety warnings and obey local fuel handling regulations.
Always make sure the fuel cap is screwed on all the way. This keeps fuel from spilling out
and from evaporating.
Failure to shut the engine off while refueling and/or to insert the pump nozzle fully into the
vehicle's filler neck could cause fuel overflow and fuel spray. Fuel spray and overflowing fuel
are dangerous because they can cause fire or serious injury.
For safety reasons, the engine must be turned off when refueling.
Never get back into your vehicle while refueling. If in exceptional circumstances you must
get back in your vehicle while refueling, make certain that you close the door and touch metal
to discharge static electricity before touching the filler nozzle again. Static electricity can
cause sparks that can ignite fuel vapors released during refueling.
Gasoline
Octane rating
Octane rating indicates a gasoline's ability to resist engine damaging knock caused by pre-ignition.
Using the correct grade of gasoline is very important to help prevent engine damage and loss of
engine performance.
The recommended gasoline octane rating for your engine is listed on a label inside of the fuel filler
flap. This rating may be specified according to AKI (CLC) or RON (ROZ) standards.
If unleaded Premium grade gasoline is specified for your vehicle, then Volkswagen recommends using
TOP TIER Detergent Gasoline with a minimum octane rating of 91 AKI (95 RON). For more
information on TOP TIER Detergent Gasoline, please go to the official website
http://www.toptiergas.com.
The gasoline grades most commonly sold in the United States and Canada have the following octane
ratings, which can usually be found on the filler pump:
Premium grade: 91 to 96 AKI
Regular grade: 87 to 90 AKI
Unleaded gasoline
Unleaded gasoline is available throughout the USA and Canada. Volkswagen recommends that you
do not take your vehicle to places where unleaded gasoline may not be available.
Gasoline containing alcohol or MTBE

You may use unleaded gasoline blended with alcohol or MTBE (methyl tertiary butyl ether), commonly
referred to as oxygenated fuels, if the blended mixture meets the following criteria:
Blends of gasoline and methanol (wood alcohol or methyl alcohol):
Anti-Knock Index (AKI) must be 87 or higher.
Blend must contain no more than 3% methanol.
Blend must contain more than 2% co-solvents.
Blends of gasoline and ethanol (grain alcohol or ethyl alcohol):
Blend must contain no more than 10% ethanol.
Blends of gasoline and MTBE:
Blend must contain no more than 15% MTBE.
Seasonally adjusted gasoline

Many fuels are blended especially for winter or summer conditions. When seasons change,
Volkswagen suggests that you buy fuel at busy stations where the seasonal adjustment is more likely
to be made earlier.
WARNING
Starting fluids can explode and cause a run-away vehicle condition.
Never use starting assist fluids.
NOTICE
Never use fuel with an octane rating lower than 87 AKI/91 RON. Using lower octane fuel may
cause expensive engine damage.
Never use leaded gasoline! Leaded gasoline will severely damage your vehicle's catalytic
converter.
Methanol-blended fuels that do not meet the criteria listed above may cause corrosion and
may damage plastic and rubber parts in the fuel system.
Never use fuels that contain lead or other metals (check listing on the fuel pump). Even lead
replacement gasoline (LRP fuels) contain metallic additives in high concentrations. They can
damage the engine.
Do not use fuels that fail to meet the criteria above, or with contents that cannot be
identified.
If you cannot tell whether a particular fuel blend meets the criteria above, ask your service
station or its fuel supplier. If you notice a loss of fuel economy or drivability and performance
problems using one of these fuel blends, we recommend that you switch to unblended fuel.
Using fuels that are different from those specified above can damage your vehicle's engine
and fuel system and cause performance problems.
Damage to the engine and fuel system and performance problems caused by using fuels
that are different from those specified above or by using starting assist fluids are not the
responsibility of Volkswagen and are not covered under the Emission warranties or any other
Volkswagen Limited Warranty.
Even a single tank full of leaded fuel can do major damage to the catalytic converter and degrade
its effectiveness in reducing polluting emissions.
If you notice a loss of fuel economy or drivability and performance problems using one of these
fuel blends, we recommend that you switch to unblended fuel. Never use fuel line antifreeze offered
for gasoline engines.
Gasoline additives
Additives are used to improve the quality of the gasoline.
Fuel quality impacts the operating performance, efficiency and service life of the engine. Therefore,
use high quality gasoline that is already blended by the fuel supplier with suitable gasoline additives
that do not contain metal. The additives provide corrosion protection, clean the fuel system, and help
prevent deposits on the engine.
Volkswagen recommends TOP TIER Detergent Gasoline. For more information on TOP TIER
Detergent Gasoline, please go to the official Web site http://www.toptiergas.com.
If quality gasoline with additives that do not contain metal is not available or engine malfunctions
occur, you should add the required additives while refueling .
Not all gasoline additives are effective. Using the wrong additives can cause significant and expensive
damage to the engine and the catalytic converter. Never use additives that contain metal. Please note
that metal can be included in some aftermarket gasoline additives that are available to be added to
gasoline during or after refueling to help improve knock resistance or increase the octane rating.
Volkswagen recommends using only additives approved by Volkswagen. Appropriate additives as well
as instructions on how to use them are available from your authorized Volkswagen dealer or
authorized Volkswagen Service Facility. Do not add any other gasoline additives.
NOTICE
You can damage the engine by using incorrect additives.
Using incorrect gasoline additives can cause extensive engine damage as well as damage
to the catalytic converter.
If you must fuel your vehicle with gasoline whose octane rating is too low, only drive with
the engine speed in the middle of the rpm range and with low engine load. Avoid high rpm and
heavy engine load. Otherwise, the engine could be damaged. Refuel your vehicle with gasoline
with the required octane rating as soon as possible.
Do not use fuel that is labeled at the pump as containing metal. Lead replacement fuel
contains high concentrations of metallic additives. Engine damage could result.
Fueling your vehicle just one time with leaded fuel or fuel that contains other metallic
additives can affect the performance of the catalytic converter and cause extensive damage to
it.
Some basics
Introduction
Rollover warning
Before driving off-road
General rules and good driving practices
Technical terms explained
Useful off-road driving equipment
Safety and off-road driving
Your vehicle can be driven on and off-road. In this chapter you will find important information on
driving your vehicle. It is very important to review this chapter before taking your vehicle off-road.
Driving off the beaten path is challenging - for the driver, the passengers, and the vehicle itself.
It requires special knowledge and skills different from those needed for highway driving. Successful
off-roading comes from a combination of theory and practice. This includes knowing the right way to
handle the expected and the unexpected .
Safety must always have top priority. Never overestimate your own abilities or underestimate the
difficulties that come with driving off-road. Never let determination get the better of your common
sense. If the going gets too difficult, turn back and find a better route to your destination.
The wide range of terrain you can come up against, and the many risks and dangers the terrain may
hide, make it impossible to foresee and deal in this Manual with every conceivable off-road situation
you may face. For this reason, it is vital for you to know what lies ahead and evaluate possible
dangers before trying to drive over difficult or unfamiliar terrain.
The vehicle is not designed for trips with an expedition-like character.
More information:
Driving instructions
Safety belts
Off-road driving situations
WARNING
Inadequate experience and knowledge of the demands of off-road driving can lead to critical
situations and cause serious personal injury.
Never take routes or risks that could put you or your passengers in danger. If you cannot
go on, or have doubts about the safety of your route, turn back and take a new route.
The intelligent technology of the vehicle cannot change the laws of physics. Despite the
ABS, adverse terrain can cause instability through blocked wheels for example, if you brake
hard when driving on a loose gravel road. Difficult terrain may also prevent the ESC from
doing its job.
Never operate the vehicle at the limit of its performance ability. Always leave a good safety
margin.
To reduce the risk of loss of control and serious personal injury, never use the cruise
control when driving off-road.
Even terrain that looks easy can be difficult and dangerous, putting you and your
passengers in a critical situation. It is often best to check an area out on foot first.
Drive with special care and think ahead in off-road terrain. If you drive too fast, or fail to
maneuver the vehicle properly, you could cause personal injury and damage the vehicle.
Never drive faster than is appropriate for the prevailing terrain and the road, traffic, and
weather conditions.
Never drive too fast across embankments, ramps, or slopes. The vehicle could become
airborne. If that happens, you will not be able to steer and can lose control.
If your vehicle becomes airborne, always keep the front wheels pointing straight ahead. If
the wheels are not pointing straight ahead when the vehicle lands, it could roll over.
Never allow people to stand in front of or behind the vehicle if you have put items such as
stones or pieces of wood under the wheels to improve traction on slippery ground. Spinning
wheels can turn these items into dangerous flying objects causing serious personal injury.
Even areas that look harmless can be dangerous. Potholes, ditches, trenches, drop-offs,
different kinds of obstacles, and soft or swampy ground often cannot be seen and can be
partially or fully covered by water, grass, branches, or other things. Driving over such terrain
can cause accidents and severe injuries. Before crossing an unknown area, carefully explore
the route you plan to take on foot.
WARNING
Never drive off-road if you are low on fuel. Too little fuel in the tank can cause an accident
and serious injuries. You can also run out of fuel in a remote area where getting help is
difficult or impossible.
When the fuel tank is almost empty, fuel supply to the engine can be interrupted,
especially when driving over bumps, across slopes, and up and down hills. The interruption
in fuel flow could stall the engine during a maneuver in difficult terrain and make you lose
control of the vehicle.
Steering and braking assistance as well as ESC and related systems will not work if the
engine sputters or stalls due to lack of fuel. This can cause loss of vehicle control,
especially in difficult terrain.
Always refuel when the tank is 1/4 full to reduce the risk of running out of fuel.
NOTICE
If the power sunroof or the windows are open when it rains or snows, the interior of the vehicle
will get wet and the vehicle may be damaged. Always keep the windows and the power sunroof
closed when driving off-road.
Rollover warning
A vehicle's center of gravity affects its rollover characteristics. Since vehicle has higher ground
clearance for off-road driving, its center of gravity is also higher than that of standard passenger cars.
The higher center of gravity increases the risk of vehicle rollover while driving. Always keep this in
mind when driving. Heed the safety information and warnings in this Manual.
WARNING
Utility vehicles have a significantly higher rollover rate than other types of vehicles.
In a rollover crash, an unbelted person is significantly more likely to die than a person
wearing a safety belt.
Your vehicle has a higher center of gravity and an increased risk of rollover while driving
than a standard passenger vehicle that is not suitable for occasional off-road use.
Never drive too fast, particularly through curves, and never attempt extreme driving
maneuvers.
Always adjust your speed and driving style to road, terrain, traffic, and weather
conditions.
Transporting luggage or other objects on top of your vehicle raises the center of gravity
and can further increase the risk of rollover.
Always avoid driving crosswise on a slope Driving crosswise on a slope.
If stopped crosswise on a slope, never get out of the vehicle using the doors that face
downhill. The combined center of gravity of the vehicle and its contents (passengers and
load) can shift, causing the vehicle to tip over and roll down the slope. Always exit the vehicle
calmly using the doors that face uphill Driving crosswise on a slope.
Before driving off-road

Checklist: Review before every off-road trip!

For your own safety and that of your passengers, carry out each of the following steps in the order
listed before every off-road trip :
Inform yourself thoroughly before exploring nature and the terrain you plan to visit.
Do not plan extensive day trips. Consider the increased fuel consumption during off-road driving.
Fill the fuel tank completely. Off-road driving consumes significantly more fuel than driving on the
road.
Check whether the tires are suitable for the off-road trip you are planning. For difficult terrain,
always use special off-road tires.
Check, and if necessary correct, the cold tire inflation pressure in all tires, including the collapsible
spare tire (if any).
Fill engine oil up to the MAX mark so the engine can be properly lubricated. This is especially
important when driving through potholes and up and down hills.
Completely refill the windshield washer reservoir with water and window washer fluid.
Install a towing eye in the front and back of the vehicle. Once the vehicle gets stuck, it may no
longer be possible to install a towing eye.
Check the vehicle tool kit. Add tools and other gear based on the special requirements of the trip
you will be taking
Stow luggage as low and flat as possible in the vehicle. Safely secure all loose objects.
Before driving off-road the first time

Before you drive your vehicle off-road, we urge you to take an appropriate off-road driving course.
Taking a course is especially important if you have little or no experience driving off-road. Even more
experienced off-roaders can benefit from an off-road driving course.
A good course can show you how to handle the vehicle in a wide range of off-road situations and how
to more safely deal with difficult terrain Driving off-road demands a different attitude and very different
skills compared with highway driving. Your safety and that of your passengers will depend on your
knowledge, skill, and caution as a driver .
WARNING
Disregarding the safety-related checklist may lead to accidents and serious personal injuries.
Always review and follow the checklist above. Follow commonly accepted safety practices
and use common sense.
All occupants must sit properly and wear safety belts whenever the vehicle is moving.
General rules and good driving practices

Off-road rules of conduct

Always be responsible and respect the environment when driving off-road. Driving through
undergrowth and over meadows can destroy areas where animals live.
Only drive where it is permitted.
Keep noise and dust to a minimum.
Leave nature as you found it.
Always stay on designated trails and paths.
Avoid sensitive natural habitats.
Yield to drivers who are driving uphill or passing.
Good driving practices
Special rules apply to off-road driving :

Never drive off-road alone. At least 2 off-road vehicles should travel together. Unexpected
situations can occur. For this reason, take along the equipment you need to call for help in case of an
emergency.
Stop and explore the route on foot wherever necessary and always before traveling over difficult
trails or terrain.
Drive over hill crests slowly. Otherwise, the vehicle can tip and be damaged and disabled.
Drive slowly through difficult terrain segments. On slippery surfaces, upshift and keep the vehicle
moving.
Look for terrain that is firm and stable. Off-road ground is frequently soft, and the tires can sink into
it. This reduces ground clearance and fording depth.
Even at low speeds, always follow other vehicles at a safe distance. If the first vehicle suddenly
gets stuck, the second vehicle can still stop in time without getting stuck as well.
WARNING
Off-road driving can be dangerous, can lead to accidents, vehicle damage, stranding in
remote areas, and serious personal injury.
Never drive too fast or for terrain and weather conditions.
Always adjust your speed and driving style to road, terrain, traffic, and weather
conditions.
Always avoid sudden, sharp maneuvers that increase the risk of loss of vehicle control or
getting stuck.
When driving off-road look and think ahead, expect the unexpected.
To reduce the risk of loss of control and serious personal injury, never use the cruise
control when driving off-road. Cruise control is designed for highway use. It is completely
unsuitable for off-road situations and can even be dangerous when used off-road.
NOTICE
Always make sure the vehicle has enough ground clearance. Severe damage to the underbody
can occur if the vehicle bottoms out. The damage could disable the vehicle and leave you
stranded.
While driving off-road do not drag the clutch or rest one foot on the clutch pedal. Otherwise,
in bumpy terrain you might press the clutch accidentally, resulting in loss of vehicle control. In
addition, the frictional connection between the engine and transmission is lost. Further, driving
while dragging the clutch causes fast wear of the clutch lining.
Tread lightly is an educational program designed to increase public awareness of land use
regulations and responsibilities in our nation's wilderness areas. Volkswagen supports the U.S. Forest
Service and the Bureau of Land Management in encouraging you to preserve our national forests and
other public and private lands by treading lightly.
Technical terms explained
Fig. 159 Illustration of A: Ascent angle. B: Lateral gradient.
The technical date in the table below only apply to ideal conditions. The values were
determined on flat, firm, and non-slippery road surfaces and under dry weather conditions.
Changes in vehicle load and the condition of the ground and the surroundings will affect the stated
maximum values. The maximum values do not apply, for example, to off-road situations and will also
be lower on hard, firm surfaces if ideal conditions do not exist. As the driver, you are always
responsible for deciding whether your vehicle is able to handle a particular situation .
Term Explanation Technical data
Ground clearance This is the vertical distance between the Maximum 7.6 in (195 mm).
level ground and the lowest part on the
vehicle.
Gradient angle The number of feet (meters) in altitude Maximum permissible 31 degrees
gained when traveling 100 ft (30.48 m) is (corresponds to 60 %).
given as a percentage or in degrees
fig. 159 A.
Information on the maximum slope the
vehicle can climb unassisted (depends on
road surface and engine power).
Lateral angle The maximum angle the vehicle may be Maximum permissible
(vehicle slope) driven across terrain without the vehicle 27 degrees.
rolling over (depends on height of center of
gravity) B.
Breakover angle Maximum permitted angle given in Maximum 21.3 degrees.

degrees that a vehicle driven at low speed
can clear a ramp without the underbody of
the vehicle scraping the ramp.
Approach/departure Transition from horizontal plane to a slope, Approach angle for off-road front
angle or from a slope to flat ground. end:
Maximum angle in degrees the vehicle can Maximum 28 degrees.
be driven at low speed along an
embankment without the bumper or Departure angle:
underbody scraping. Maximum 25 degrees.
Fall line This is the vertical drop route.
Articulation Articulation capability of the vehicle while driving on one side over an object.
WARNING
Never exceed the recommended maximum values in the above table. Exceeding these values
will result in serious personal injury and/or damage to your vehicle.
All values listed above are for ideal conditions and assume firm, even surfaces that are
dry and not slippery.
Off-road conditions will always be less than ideal. Always reduce the maximum values
listed in the table above to allow an adequate margin of safety between the ideal maximum
value and your vehicle's actual off-road situation.
Useful off-road driving equipment
The checklist lists only a few of the items that could be very helpful when driving off-road . If you
have user's manuals or assembly instructions for the listed extra equipment, take them with you off-
road and heed them.
Checklist
Checklist: Useful off-road driving equipment :

Water, compass, maps, flashlight and spare batteries.
Cable winch, tow rod or tow rope strong enough for your vehicle.
Mobile phone, shovel, blankets, and rubber boots, tape measure, and yardstick.
Electric air compressor to connect to the 12 volt outlet in the vehicle for inflating the tires.
A wooden plank about 2 inches thick and 3 feet long or similar aluminum frame as traction aid for a
stuck vehicle or as a base for the vehicle jack.
Snow chains for all 4 tires, additional spare tires.
WARNING
Accidents and severe personal injury can result from the improper use of tools or equipment
as well as from the use of tools or equipment that are damaged or not right for the job to be
done.
Safety and off-road driving

Proper seating position and safety belt use is always important, regardless of whether you are on the
highway or driving off-road.
Every person in the vehicle must sit properly and wear his or her safety belt whenever the vehicle
is moving
Every occupant must properly fasten the safety belt belonging to the seat he or she occupies and
keep the belt properly fastened while riding in the vehicle. This applies to the driver and all
passengers, even when driving off-road
Safety belts save lives on the road and off.
Distance to the steering wheel

When driving off-road, you may want to sit a little differently than you would for normal highway
driving.
Depending on the terrain, you may need more strength to control the steering wheel because of the
higher forces that can come up from the front wheels.
Sit so that you can clearly see the terrain in front of you, especially when you are driving up or down
slopes. Never sit so that the distance from the center of your breast bone to the center of the airbag
cover on the steering wheel is less than 10 inches Adjusting the seating position.
Suitable shoes
Never wear shoes with a slippery sole or high-heels when driving off-road, and never drive off-road
barefoot. Always wear shoes that support your feet properly and give you a good feel for the pedals.
WARNING
Not wearing safety belts, or wearing them improperly will increase the risk of serious injuries
when driving off-road. Holding the steering wheel improperly will reduce your ability to
control the vehicle and can also increase the risk of injury when driving off-road.
Properly worn safety belts are the single most effective means of reducing the risk of
serious injury and death during sudden braking or driving maneuvers and in automobile
accidents. For this reason, always wear your safety belt properly and make sure all
passengers wear their safety belts properly as well whenever the vehicle is moving.
Never wrap your thumbs around the steering wheel rim. When driving off-road, obstacles
in front of the wheels can make the steering wheel jerk suddenly in your hands and cause
personal injury. Rest your thumbs pointing up on the on the surface of the steering wheel at
the 3 and 9 o'clock positions.
Off-road driving situations
Introduction
Selecting the right gear
Driving in rough terrain
Driving through water
Driving over snow-covered terrain
Driving in steep terrain
Driving crosswise on a slope
Avoiding deep ruts and depressions
Crossing ditches
Driving in sand and mud
If the vehicle is stuck
After driving off-road
Driving off-road: Drive at a crawl; don't speed! Even harmless-looking areas can be dangerous .
Volkswagen recommends that you get out of the vehicle and explore the terrain personally before
trying to cross it. Walk the area and make sure that the ground is firm enough. Check for obstacles or
other hidden dangers. Always obey local requirements and regulations; follow commonly accepted
safety practices and use common sense
The examples discussed in this chapter are intended to help you drive safely off-road. But the situation
facing you may not fit any of these examples.
The wide range of terrain you can come up against, as well the risks and dangers it may hide, make it
impossible to deal with every conceivable situation in this Manual. The examples in this chapter are
only general guidelines to help you drive safely off-road. The guidelines may not apply in every
situation you encounter. Therefore, it is vital that you know what lies ahead and evaluate possible
dangers before you try to drive over difficult or unfamiliar terrain. This will help you to evaluate and
prepare for possible dangers.
Driver assistance systems were designed only for driving on paved roads.
More information:
Before leaving
WARNING
Areas that look harmless can, in fact, be very dangerous. Potholes, ditches, trenches, drop-
offs, different kinds of obstacles, and soft or swampy ground often cannot be seen and can
be partially or fully covered by water, grass, branches, or other things. Driving over such
terrain can cause accidents and severe injuries.
Before crossing an unknown area, carefully explore the route you plan to take on foot.
Never choose a risky route or run a risk that will endanger you and your passengers. If
you have any doubts as to whether the route is safe, turn around use a different route.
Always adapt driving speed and style to load, terrain, visibility, and weather conditions.
Selecting the right gear
Different kinds of terrain require different gears. Selecting the right one helps you to get through safely.
Before driving over a difficult section, think carefully about which gear you should select. With time,
you will learn which gear is best for various types of terrain.
Basics
If you select the right gear you will usually not have to slow the vehicle down with the foot brake
when driving down slopes - the engine will brake the vehicle. You will then only have to use the brake
when the braking power of the engine is not enough.
Never accelerate more than necessary when driving off-road. If you accelerate too hard, the
wheels could lose traction and you could lose control of the vehicle.
Manual transmission
Never disengage the clutch or change gears in difficult terrain. Due to the increased adhesion of all
wheels, the vehicle can come to standstill if the clutch is disengaged in mud or deep sand or on an
incline. Driving off again from a standstill under these conditions may be difficult or even impossible.
Use first or second gear when driving up or down steep slopes.
On soft surfaces drive with appropriate speed and the highest possible gear.
Use selector lever position (D) when driving on ordinary level areas.
Use Tiptronic mode and put the vehicle in 2nd or 3rd gear when driving through moderately
difficult off-road terrain, for example mud, sand, water, or hills 223.
Use Tiptronic mode and shift into 1st gear when driving up or down steep hills 1st 223.
On soft or slippery surfaces, drive at an appropriate speed and in the highest possible driving
range of the Tiptronic.
Driving in rough terrain

Driving tips
Drive no faster than a crawl over rocky sections.
Drive around obstacles such as rocks wherever possible. If this is not possible:
Carefully advance until one front wheel is on the rock and then slowly drive over it .
NOTICE
If you are facing a large rock or tree stump or other large obstacle, do not attempt to drive
straight over it or to climb over it with just 2 wheels. A rock or other obstacle that is too high
for your vehicle to clear will damage and may disable the vehicle if you try to drive over it. You
could be stranded far away from help. Never let large obstacles pass under the vehicle. If there
is no way around them and they are too large to drive over, back up and find another route.
Even obstacles that are lower than your vehicle's ground clearance can come into contact
with the underbody and damage or disable your vehicle. Such obstacles are especially
dangerous when the ground around them is soft or there is a dip right in front of or behind
them. They are also dangerous if you drive over them too quickly and the shock absorbers are
compressed.
Leaking engine oil and brake fluid can pollute the environment. Collect leaking operating fluids
and dispose of them properly in accordance with applicable environmental laws and regulations.
Driving through water
Important factors when deciding whether to drive through water:

Water depth.
Strength of the current.
Firmness of stream bed and bank.
Shape of the bank.
Objects in the water.
Before driving through water
Stop, get out of the vehicle, and assess the situation :

Measure water depth from one side to the other. The water must not be any higher than the bottom
of the vehicle body (see Dimensions 35). Check the firmness of the bed and banks; check for drop-
offs and obstacles in the water .
Make sure it is possible to enter and exit the water safely.
Check the angle of the embankment and the firmness of the ground on each bank.
Driving through standing and slow-moving water
The vehicle can drive through standing water if the ground under the water is firm enough .
Drive slowly into a river in the direction of the flow. Never exceed the departure/approach angle
and lateral angle (vehicle slope).
Always drive at a constant speed to the other side.
This will help prevent engine damage from the water. It also allows an air pocket to form in front of the
engine that can supply it with the necessary air.
Entering the water quickly or driving too fast through the water will create a bow wave. A bow wave
can force its way into the engine air intake duct and seriously damage the engine.
Driving through fast-moving water
Driving through fast-moving water is very dangerous .

The vehicle can be swept away by the current. Even vehicles with high ground clearance can get
stuck if the ground is washed out from under the tires. Fast-moving water will build up against the side
of your vehicle. This will make the water deeper. Always think about this before entering the water.
Water volume, speed, and depth can be very unpredictable and dangerous.
If you are uncertain how fast the water is flowing, look for a shallower place where you can cross in
safety. If you cannot find a safe place to cross, turn back.
After driving through water

After crossing through deep water, stop the engine and check the oil dipstick. If there are beads of
water on the oil dipstick or the oil level has increased, do not start the engine. Change the engine oil
immediately. Depending on the amount of water in the oil, running or starting the engine can result in
engine failure or serious engine damage.
Always dry the brakes by braking a couple of times.
After driving through water, have the vehicle drive train and electrical system thoroughly inspected
for damage by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility.
WARNING
Flowing water is very powerful and can sweep your vehicle away. This can lead create an
extremely dangerous situation and cause an accident with serious personal injuries.
go on or have doubts about the safety of your route, turn back and take a new route.
Never stop in the water.
If water gets into the engine, your vehicle can break down. You will lose control of a
broken down vehicle, and it can be swept away.
Soft surfaces, mud, underwater obstacles, and holes can cause accidents and can cause
the vehicle to break down in the water. This can lead pose extreme danger.
Rapidly flowing water can develop strong forces that can pull the vehicle downstream.
This can cause accidents and fatal injuries.
Drive through water only where the banks and bottom are firm enough and the water is
shallower at all points than the maximum permissible fording depth for your vehicle.
NOTICE
Vehicle components such as the engine, drive train, suspension or electrical system may
be severely damaged by driving through water.
Avoid stopping in deep water. This can let water get inside the vehicle.
On soft ground, the tires dig into the surface. This reduces fording depth. Make sure that
the ground is sufficiently firm.
Avoid creating a bow wave in front of the vehicle while driving through water. A bow wave
could force its way into the engine air intake duct and seriously damage the engine.
If you even briefly exceed the maximum fording depth when driving through water, severe
engine damage will result. This engine damage will lead to a vehicle breakdown. This can
disable the vehicle in the water.
Never drive over salt flats or through salt or salty water. Salt causes vehicle corrosion.
Rinse all parts of the vehicle that were exposed to salt or salt water right away with fresh water.
Driving over snow-covered terrain

Install snow chains on all 4 tires before driving over snow-covered terrain.
Snow-covered terrain may look harmless but the snow can hide many dangers. This is particularly true
for stretches where you can't see the tracks left by other vehicles.
WARNING
Driving through snow-covered terrain is very dangerous.
Potholes, ruts, ditches, drop-offs, and other obstacles are often partially or completely
hidden by the snow, especially when it is deep.
Snow-covered dangers can lead to an accident, serious personal injury, or stranding
under extreme weather conditions.
Always adapt driving speed and style to load, terrain, visibility, and weather conditions.
Driving in steep terrain

Driving on slopes
Before driving up or down a slope, get out of the vehicle, explore the terrain, and assess the situation.
Walk the grade you intend to drive, check the stretch for firmness and obstacles or other hidden
dangers .
Find out how the route continues at the end of a steep angle.
If the route is too steep or too uneven or the ground is too loose, do not drive this route. Find an
alternative.
Drive at a constant speed straight up or down a slope.
Use just as much power as needed to get up the slope. Too much power makes the tires slip, spin,
or lose traction. This can increase your risk of losing control. However, too little power will increase the
likelihood of stalling.
Never stop or try to turn around on a slope.
Do not let the engine stall.
Do not change gears while climbing the slope.
If you get stuck while driving up a slope

Never try to turn around.
If your engine stalls, apply the foot break and restart the engine.
Shift into reverse and back your vehicle carefully straight down the slope.
Use the brake to keep the speed steady when backing down to a safe place.
Driving down a slope

Never exceed the vehicle's maximum lateral angle (vehicle slope). If an emergency forces you to
cross the slope and the vehicle threatens to roll over, immediately steer the vehicle downhill along the
fall line.
There is an increased risk of rollover when driving down a slope. For this reason, concentrate on
steering safely down the slope.
Drive down steep slopes in first gear.
Gently apply the foot brake to help keep the vehicle under control.
If it is possible and if it is not dangerous, drive straight down the fall line (maximum slope).
Do not depress the clutch pedal or shift into Neutral (N).
WARNING
Never try to drive up or down slopes that are too steep for your vehicle. The vehicle could
slide away, tip over, or roll over.
The lateral angle must never be more than the maximum angle approved for the vehicle.
Always drive along the fall line when driving up or down a slope.
Never try to turn the vehicle around on a slope. The vehicle could tip over or roll down the
slope.
If the engine stalls or you can no longer drive up the slope for any reason, stop and apply
the foot brake. If stalled, apply the foot brake and restart the engine. Then shift into Reverse
(R) and carefully back your vehicle straight down the slope along the fall line. Keep the
vehicle speed slow and even.
If the engine will not restart, apply constant pressure to the foot brake and carefully back
straight down the slope the same way you drove up. Keep the vehicle speed slow and even.
If the engine is running, select Reverse and carefully back straight down the slope the
same way you drove up. Use engine braking power and the foot brake to keep the vehicle
speed slow and even.
Never just roll down a slope with the clutch depressed or the transmission in Neutral (N).
You could lose control of the vehicle.
Driving crosswise on a slope
Fig. 160 Steer downhill along the fall line.

Fig. 161 On a slope, always exit on the uphill side of the vehicle.
Driving crosswise on a slope is one of the most dangerous off-road driving situations .
Even if it seems harmless, never underestimate the difficulties and hazards when driving crosswise on
a slope. A vehicle perpendicular to the slope of the hill can become uncontrollable and slide away, tip,
or roll over. This could cause severe or fatal injuries to all occupants.
Driving at an angle to the slope

Before driving crosswise on a slope, check whether there is a different, safer route.
If you have to drive across a slope, first make sure the ground is firm and even along your route. If the
ground is soft or slippery, the vehicle is more likely to slip away to the side. Make sure that the angle
does not become too great due to surface unevenness. This can make the vehicle tip and roll over.
The steeper the slope across which the vehicle is moving, the more important it becomes to make
sure the wheels on the lower side do not run over holes or depressions. The wheels on the high side
must never run over protruding rocks, tree stumps, or other obstacles.
If the vehicle threatens to tip, immediately steer downhill into the fall line and gently accelerate
fig. 160. If it is not possible to steer down the fall line, steer uphill and gently accelerate.
The vehicle center of gravity should be as low as possible. The weight of all passengers should be
evenly distributed. Taller or heavier passengers should sit on the higher side of the vehicle. Luggage
on the roof should be removed and heavy objects should be secured, as the vehicle could tilt due to
the sudden shifting of objects in the vehicle .
While driving across the slope, passengers on the rear bench should always sit on the uphill side of
the vehicle. In extreme cases, passengers on the downhill side must get out of the vehicle until the hill
has been safely crossed.
Exiting on a hillside
If the vehicle comes to a standstill at a significantly tilted angle on the hillside, all passengers should
exit the vehicle on the uphill side fig. 161. This applies even if the uphill door is hard to open. The
uphill-side door may swing shut due to its weight or carelessness.
WARNING
Never try to drive crosswise on a slope, especially one that is too steep for your vehicle. The
vehicle could slide sideways and tumble down the slope. To reduce the risk of accidents and
serious injuries:
Never underestimate the difficulties and dangers of driving crosswise on a slope. Never
take routes or risks that could put you or your passengers in danger. If you cannot go on or
have doubts about the safety of your route, turn back and take a different route.
When driving crosswise on a hill, the vehicle can lose its hold, slide sideways, tip or turn
over and roll down the hill.
Make certain that the wheels on the downhill side of the vehicle do not run over holes or
depressions. Make certain that the wheels on the high side of the vehicle do not run over
rocks, tree stumps, or protruding objects.
Before driving crosswise on a hill, check whether it is possible to steer into the fall line
along the selected route. If this is not possible, select a different route. If the vehicle
threatens to tip, immediately steer downhill into the fall line and gently accelerate fig. 160.
If the vehicle is stopped a hillside and is laterally tilted, avoid sudden and uncontrolled
movement in the vehicle The vehicle can lose its hold, slide sideways, tip, or turn over and
roll down the hill.
If the vehicle is stopped at while pointed crosswise on a steep slope, make certain that no
one exits the vehicle through a door on the downhill side. This can shift the vehicle center of
gravity to the downhill side. The can tilt or roll over and roll down the hill. To help minimize
this risk, always exit the vehicle through the doors that are facing uphill fig. 161.
When getting out, make certain that doors opened on the uphill side are not closed
carelessly and do not swing shut due to their own weight and injure anybody.
Avoiding deep ruts and depressions

Ruts are very common on forest trails, in grassland and fields, as well an on much-used cross-country
lanes.
If the ruts and depressions are firm and shallow, simply follow the ruts.
Do not drive in ruts and depressions that are too deep . If deep ruts and depressions cannot be
avoided, turn around.
NOTICE
If ruts and depressions become too deep, the vehicle underbody can bottom out and get stuck.
This can damage or even disable the vehicle.
Crossing ditches
Check whether the approach/departure angle and the lateral angle (tilt) are small enough to allow
the vehicle to cross the ditch.
If possible, cross the ditch at an acute angle .
This is only possible if the lateral angle (side-to-side tilt) is not too large.
WARNING
If the approach/departure angle or the lateral angle of the ditch are too steep for the vehicle,
do not attempt to cross the ditch. The vehicle can fall over on its side, slide sideways, or turn
over.
NOTICE
If you enter at right angles to the ditch, the front wheels will fall into the ditch. The underbody
of the vehicle can get stuck and the vehicle can be damaged or disabled. Getting out of a ditch
without assistance is rarely possible, even with all-wheel drive.
Driving in sand and mud

Always drive at a constant speed through sand and mud; do not shift gears manually and do not stop.
Check whether ESC is active. The indicator light or in the instrument cluster must both be off
236.
Select a suitable gear and remain in this gear until solid ground is reached
Always keep the vehicle moving.
Never drive too fast through sand and mud. The wheels may spin and the vehicle can get stuck. If the
tires no longer grip, turn the steering wheel back and forth slightly in short, quick movements. This can
improve front wheel traction when driving in sand and mud.
Driving through sand
Never reduce tire inflation pressure before driving through sand . If you have reduced the tire
pressure to drive through sand, make sure to correct the tire pressure afterwards before driving any
further. Driving with reduced tire pressure can make you lose control of the vehicle and increase the
risk of serious or fatal injuries.
Driving through mud

Do not change your speed or your direction. The tires can lose their grip in mud. If the vehicle skids,
steer in the direction the vehicle is sliding to try to get it back under control.
WARNING
Driving through sand and mud can be dangerous. The vehicle can skid out of control and
crash, causing serious injuries. Always drive carefully when driving in sand and mud.
go on or have doubts about the safety of your route, turn back and take a different route.
WARNING
Driving on tires that are not inflated to the correct cold tire inflation pressure can cause an
accident with serious or fatal injuries.
If the tires are not inflated to the correct pressure, they will wear out faster and the vehicle
will not handle as well.
Incorrect tire pressure can make tires overheat, resulting in tire damage including tire
tread separation and sudden blowouts, that can make you lose control of the vehicle.
If the vehicle is stuck

It takes experience and a fine touch to rock a vehicle back and forth to get it going when it is stuck.
If you go about it the wrong way, you'll dig the vehicle in even deeper and need someone to tow you
free.
If the vehicle won't budge

Carefully dig out all four wheels and make sure that no other parts of the vehicle are stuck in the
sand.
Select reverse gear.
Carefully accelerate and try to back up in your own track.
If this doesn't help, try placing brushwood, floor mats, or burlap sackcloth directly in front of the tires to
improve grip and traction .
Rocking the vehicle free

Don't spin the wheels. It's unlikely to help you get going and all but certain to dig you in even deeper if
you do it too much .
Switch off Anti-Slip Regulation (ASR)
Turn the steering wheel so that it points straight ahead.
Shift into reverse and accelerate just to the point where the wheels first start to spin.
Immediately engage first gear and accelerate again until the wheels just begin to spin.
Repeat this process to get the vehicle to rock back and forth and then hopefully develop enough
forward momentum to get going again.
Once the vehicle is free, switch ASR back on
WARNING
Make sure there are no people or animals in front of or behind the vehicle, especially when it
is stuck and you are trying to rock it loose.
Stones, brush, pieces of wood, and other objects under the wheels can be thrown at great
velocity when they spin. This can cause serious or even fatal injuries.
If the stuck vehicle suddenly regains traction, it will lurch forward and can run over
anybody who is standing too close to it in the front or in the back.
After driving off-road
After an off-road drive, you always need to check the vehicle's underbody for damage and may need
to clean the radiator grille .
Checklist
Checklist: Perform after every off-road drive :

Switch on ASR again
Clean the turn signal lights, the headlights and taillights, the license plate, and all windows.
If required, remove the towing eye(s) and snow chains.
Check tires, suspension struts, and axles for damage and remove coarse dirt, stones, and foreign
objects from the tire tread.
Examine the vehicle underbody and remove objects such as twigs, leaves, or bits of wood that
have gotten stuck in the brake system, the wheels, the suspension, the exhaust system, of the
engine . If damage or leaks are detected, see an authorized Volkswagen dealer or an
Remove coarse dirt from the radiator grille and the vehicle underbody Exterior care and
cleaning.
Check the engine compartment to for dirt that interferes with engine operation Working in the
engine compartment.
After driving in sandy or dusty areas, have the air cleaner checked, and if necessary cleaned by an
authorized Volkswagen dealer or authorized Volkswagen Service Facility so that dust, sand, and
grit does not get drawn into the engine.
WARNING
Objects trapped under the vehicle floor can damage the brake system, fuel lines, gaskets,
and other underbody parts. Such objects can also ignite on contact with hot vehicle
components. You must check after each off-road outing to see whether any foreign objects
have gotten stuck in the vehicle underbody.
Never drive the vehicle if any foreign objects are stuck in the brake system, the wheels,
the suspension, the exhaust system, or the engine or engine compartment.
Flammable materials such as dry leaves or twigs can catch fire from contact with hot
vehicle components. A fire can cause serious personal injuries.
Trapped objects can damage or block the fuel lines, the brake system, gaskets, and other
parts of the suspension system. This can cause you to lose control of the vehicle and have
an accident.
NOTICE
Dust, sand, grit, and other material that has collected in the air filter after driving in certain
kinds of off-road terrain can be drawn into the engine and cause expensive damage. After
driving off-road where it is very dusty or sandy, be sure to have the air filter checked and, if
necessary, cleaned by an authorized Volkswagen dealer or authorized Volkswagen Service
Facility.
Introduction
Warning light
Opening and closing the engine compartment
Always position the vehicle on a firm and level surface before doing any work in the engine
compartment.
The engine compartment of a vehicle is a hazardous area. Never do any work on the engine or in the
engine compartment unless you
know exactly how to carry out the job,
have the correct technical information and the proper tools and supplies, and
are familiar with the necessary safety precautions !
If you are uncertain in any way, have the work done by an authorized Volkswagen dealer or an
work.
More information:
Exterior views
Windshield wiper and washer
Brake fluid
Checks while refueling
Engine oil
Engine coolant
WARNING
Unintended vehicle movement during maintenance work can cause serious personal injuries.
Never work under the vehicle unless you have safely secured the vehicle from moving. If
you must work under the vehicle with the wheels on the ground, always make sure that the
vehicle is on level ground, that all four wheels are chocked to keep them from moving, and
that the key is not in the ignition.
If you must work under a vehicle raised on a floor jack, always make sure that the vehicle
is safely supported on safety stands intended for that purpose that are strong enough to
support the weight of the vehicle. The jack supplied with the vehicle is not strong enough for
this purpose and can collapse causing serious personal injury.
WARNING
The engine compartment of any motor vehicle is a potentially dangerous area and can cause
Always use extreme caution when doing any work in the engine compartment. Always
follow commonly accepted safety practices and use common sense. Never risk personal
injury.
Never perform any work in the engine compartment unless you know exactly how to carry
out the job and have the correct technical information and the correct tools.
If you are uncertain about what to do, have the work performed by an authorized
Volkswagen dealer, an authorized Volkswagen Service Facility, or another qualified
workshop. Serious personal injury may result from improperly performed work.
We strongly recommend that you always have HID - High Intensity Discharge (Xenon)
lights and H7/H15 bulbs replaced by a qualified technician. Serious personal injury may result
from improperly performed work.
Never open or close the engine hood if steam or coolant is escaping. Hot steam or coolant
can cause serious burns. Always wait until you no longer see or hear steam or coolant
escaping from the engine.
Always let the engine cool down completely before carefully opening the hood.
Hot parts of the engine and the exhaust system will burn skin on contact.
When the engine has cooled down and you are ready to open the hood:
Firmly apply the parking brake and shift the transmission into Park (P) (automatic) or
Neutral (manual only).
Take the vehicle key out of the ignition.
On vehicles with Keyless Access, make sure that the remote control vehicle key is out
of range of the vehicle and that the vehicle cannot be started by depressing the starter
button.
Always keep children and others away from the engine compartment and never leave
them unsupervised.
The engine coolant system is under pressure when the engine is hot. Never unscrew the
coolant expansion tank cap when the engine is hot. Hot coolant can spray out and cause
severe burns and other serious injuries.
Turn the cap slowly and very carefully in a counterclockwise direction while applying
light downward pressure on the top of the cap.
Always protect your face, hands, and arms from hot escaping coolant or steam by
covering the cap with a large, thick rag.
Never spill fluids on the engine or exhaust system when refilling. Spilling fluids onto hot
parts of the engine or exhaust system can cause a fire.
WARNING
High voltage systems in the engine compartment can cause electrical shocks or even
electrocution, severe burns, other serious injuries, and even death!
Never short-circuit the electrical system. Be especially careful when using jumper cables.
The vehicle's battery could explode!
To reduce the risk of electrical shock and personal injury while the engine is running or
being started:
Never touch ignition cables. Never touch other components of the high voltage
electronic ignition system.
Never touch the wiring of the HID - High Intensity Discharge (Xenon) headlights.
Read and heed the important information and warnings on cleaning the engine
compartment
WARNING
Moving parts in the engine compartment can cause serious personal injury on contact.
Never reach into the area around or touch the radiator fan. Contact with the blades can
cause serious personal injury. Always remember that the radiator fan is temperature-
controlled and can come on suddenly even when the engine has been switched off for a while
and the key has been removed from the ignition.
If you have to perform a check or repair when the engine is running, there are more risks
from the rotating parts, such as the drive belts, alternator, radiator fan, etc., and from the
high-voltage ignition system. Always use extreme care.
Always make sure that jewelry, loose clothing and long hair do not get caught in
rotating engine parts. Before starting any work remove your jewelry, take off your necktie,
tie back and cover your hair, and do not wear clothing that can hang down and get caught
in moving engine parts.
Always use extreme caution if the accelerator pedal has to be depressed to perform a
check. The vehicle will start to move even if the electronic parking brake is on.
Never leave any objects in the engine compartment, for example cleaning rags and tools.
Objects left behind can cause malfunctions, engine damage, and even fires.
WARNING
Operating fluids and some materials in the engine compartment can catch fire easily, causing
burns and other serious personal injuries!
Do not smoke.
Never work next to open flames or sparks.
Never pour or spill operating fluids or other flammable liquids on the engine. These fluids
can ignite on hot engine parts and cause injuries.
If work on the fuel system or the electrical system is necessary:
Always disconnect the 12 Volt vehicle battery. Make sure the vehicle is unlocked when
you disconnect the battery, or the alarm will go off. Never touch the electrical wiring of the
ignition system.
Never work near heaters, water heaters, or other open flames.
Always have a functional, approved fire extinguisher nearby.
NOTICE
When changing or topping off fluids, make sure that you pour the fluids into the correct
reservoirs. Adding the wrong type of operating fluids will cause serious malfunctions and
engine damage.
Fluid leaks are harmful to the environment. Regularly check the ground underneath your vehicle
for this reason. If you find spots of oil or other fluids, have your vehicle checked by your authorized
Volkswagen dealer or authorized Volkswagen Service Facility. Dispose of leaked operating fluids
properly.
Warning light
Lights up Possible cause Proper response
Stop!
Engine hood not properly closed.
Close the engine hood.
If the engine hood is open or not closed properly, the warning light comes on in the instrument
cluster.
Depending on your vehicle's equipment and options, a symbol showing that the hood is not properly
closed may appear in the instrument cluster display instead of the warning light. The symbol will still
be displayed even after the ignition is switched off. The display goes out about 15 seconds after the
vehicle has been locked with the doors closed.
WARNING

Checklist
Before any work in the engine compartment, carry out the following steps in the order in which they
are listed :
Park the vehicle in a safe place on a firm, level surface.
Hold the brake pedal down until the engine is switched off.
Apply the electronic parking brake to help prevent the vehicle from moving Braking and parking.
Shift the transmission into Park (P) (automatic) or Neutral (manual only) Shifting.
Stop the engine and remove the key from the ignition switch Starting and stopping the engine.
Let the engine cool down sufficiently.
Keep children and others away from the vehicle.
Make sure the vehicle cannot move unexpectedly.
WARNING
Disregarding the safety-related checklist may result in serious injuries.
Always review and follow the checklist. Follow accepted safety practices and use common
sense.
Opening and closing the engine compartment
Fig. 162 A: Inside engine hood release in the footwell on the driver side. B: Outside engine hood release in
the radiator grille.
Fig. 163 A: Bracket for hood support in the engine compartment. B: Hood propped open.
Opening the engine hood
Before you open the hood, make sure that the windshield wiper arms are resting on the windshield
.
Open the driver door and pull the inside hood release lever in the direction of the arrow fig. 162
A. The engine hood is released from its latch by a spring .
Push the outside hood release lever B (arrow) and lift the hood all the way up.
Pull the hood support out of its bracket in the direction of the arrow fig. 163 C and insert it into
the opening in the hood D.
Closing the engine hood
Lift the hood slightly .

Take out the hood support and clamp it in place in its bracket C.
Lower the hood by hand until it is about 1 ft. (30 cm) above its latch and then let it drop into place
to latch it. Do not push down on it afterwards!
If the hood does not close completely, open it again and close it properly.
When the hood is properly closed, you can see that it fits flush with the other body parts. The indicator
light in the instrument cluster will go out
WARNING
If the hood is not closed properly, it could fly up and block your view while you are driving.
This can lead to a crash and serious personal injuries.
After closing the engine hood, check that the hood release lever is properly latched into
the hood latch. The engine hood must be flush with the surrounding auto body parts.
If you ever notice that the hood latch is not properly secured when the vehicle is moving,
stop at once and close it.
Never let anyone get in the way of the hood when closing it.
NOTICE
Make sure the windshield wipers are switched off and the windshield wiper arms are resting
on the windshield before you open the hood. Otherwise, the windshield wipers and the hood
may be damaged.
Always put the windshield wiper arms down against the windshield before driving the
vehicle.
NOTICE
Before opening or closing the engine hood, make sure there is enough room to do so, for
example when the vehicle is in a garage.
Engine oil
Introduction
Engine oil specifications
Engine oil capacities
Checking the engine oil level and adding oil
Engine oil consumption
Changing engine oil
More information:
booklet Warranty and Maintenance booklet
WARNING
Improper handling of engine oil can cause severe burns and other serious injuries.
Always wear eye protection.
Engine oil is poisonous and must be stored out of the reach of children.
Store engine oil only in the closed original container. This also applies to used oil until
disposal.
To reduce the risk of poisoning, never drain the oil into empty food or beverage
containers that might mislead someone into drinking from them.
Continuous contact with used engine oil is harmful to your skin. Always protect your skin
by washing thoroughly with soap and water.
Engine oil becomes extremely hot when the engine is running and can cause severe
burns. Always let the engine cool down to the touch.
Like all other operating fluids, engine oil can pollute the environment. Collect leaked or spilled
operating fluids and dispose of them properly in accordance with applicable environmental laws and
regulations.

Lights
up
Engine oil level too low. Stop the engine. Check the engine oil level
Stop!
Switch off the engine. Check the engine oil
level.
If the warning light flashes although the oil
Engine oil pressure too low. level is normal, do not continue driving or let
the engine idle. Otherwise, the engine could
be damaged. Contact an authorized
Volkswagen dealer or an authorized
Have the engine oil sensor checked by an

Engine oil system malfunction. authorized Volkswagen dealer or an
WARNING
NOTICE
Engine oil specifications

The engine oil used must conform to exact specifications.
Using the proper engine oil is important for the functionality and service life of the engine. Your engine
was factory-filled with a high-quality multi-grade oil which can usually be used throughout the entire
year.
Engine oils are constantly being improved. Authorized Volkswagen dealers and authorized
Volkswagen Service Facilities are always up-to-date regarding new developments and changes.
Volkswagen therefore recommends that you have the engine oil changed by an authorized
Engine oil quality is based not only on requirements for engines and exhaust treatment systems, but
also on fuel quality. Engine oil comes into contact with fuel and fuel residue in all internal combustion
engines, causing engine oil to age and its lubricating qualities to deteriorate.
Your engine was factory-filled with a high-quality, synthetic all-season engine oil that meets strict
Volkswagen oil quality standards and has a viscosity grade of SAE 5W-40 or SAE 5W-30. You can
use this oil for normal driving in all temperatures.
If you need to add oil between oil changes, use only a high quality oil that expressly complies with the
Volkswagen oil quality standard specified for your vehicle's engine:
Engines Engine oil specification
VW 502 00,
All gasoline engines VW 503 00,
VW 504 00
At the time this Manual was printed, the engine oils available in the U.S. that meet these Volkswagen
standards are synthetic oils. This does not mean, however, that any synthetic engine oil will meet
Volkswagen standards. Always use an approved oil that expressly complies with the Volkswagen oil
quality standard that applies to your vehicle's engine.
General recommendations:
If synthetic oil that meets the applicable Volkswagen oil quality standard with viscosity grade SAE
5W-40 or SAE 5W-30 is not available in your area, be sure to use a viscosity grade suitable for the
climate, season, and operating conditions that exist where the vehicle is used. Make sure the oil meets
the quality standard listed in table
Engine oils are constantly being improved. Authorized Volkswagen dealers and authorized
Volkswagen therefore recommends that you have the engine oil changed by an authorized
NOTICE
If you need to add oil and there is none available that meets the Volkswagen oil quality
standard your engine requires, you may add a total of no more than 1/2 quart (0.5 liter) of a
high-quality synthetic oil that meets ACEA A3 specifications and has a viscosity grade of
SAE 5W-40 or SAE 5W-30.
Use only a high quality engine oil that expressly complies with the Volkswagen oil quality
standard specified for your vehicle's engine. Using any other oil can cause serious engine
damage that will not be covered by any Volkswagen Limited Warranty.
Do not mix any lubricants or other additives into the engine oil. Doing so can cause engine
damage! Damage caused by these kinds of additives are not covered by any Volkswagen
Limited Warranty.
Engine oil capacities

Engines Engine oil capacity (with filter)
Gasoline engines About 4.9 quarts (4.6 liters)

Checking the engine oil level and adding oil
Fig. 164 Oil dipstick with engine oil level marks.
Fig. 165 In the engine compartment: Engine oil filler cap.
Checklist
Perform the steps in the order listed :

1. With the engine at operating temperature, park the vehicle on a level surface to help prevent an
incorrect oil level reading.
2. Switch off the engine and wait a few minutes for the engine oil to flow back into the oil pan.
3. Open the engine hood .

4. Find the oil filler opening and the dipstick. You can identify these by the symbol on the engine
oil filler cap fig. 165 and the colored handle on the dipstick. If you are not sure where the cap
and the dipstick are located, see your authorized Volkswagen dealer or authorized Volkswagen
Service Facility for assistance.
5. Remove the dipstick from the guide tube and wipe the dipstick off using a clean cloth.
6. Reinsert the dipstick into the guide tube and push it all the way in. If there is an alignment tab on
the engine oil dipstick, make sure it lines up with the notch in the guide tube, and that the dipstick
goes all the way in.
7. Remove the dipstick again and read the oil level on the dipstick fig. 164 as described below:
(A): Do not add any oil . Continue with step 15.

(B): Oil may be added (about 1 pint / 0.5 liter). Continue with step 8 or step 15.
(C): You must add oil (about 1 quart / 1.0 liter). Continue with step 8.
8. After reading the oil level, reinsert the dipstick back into the guide tube and push it all the way in.
9. Remove the cap on the engine oil filler opening fig. 165.
10. Only add engine oil that Volkswagen has approved for that engine. Add the oil gradually in small
quantities (no more than 1 pint / 0.5 liter).
11. To avoid overfilling, you must wait about one minute each time you add oil so that the oil can flow
into the oil pan up to the marking on the dipstick.
12. Read the oil level on the dipstick again before adding another small amount, if necessary. Never
add too much oil .
13. After adding oil, the level must at least be in the center of the fig. 164 (B) area, but never above
(A) .
14. After adding oil, securely install the cap on the engine oil filler opening. Otherwise, oil could leak
out while the engine is running.
15. Insert the oil dipstick back in the guide tube and push it all the way in.
16. Close the hood .
Engine oil level ranges
Required action according to the respective engine oil level:
Range (A) Do not refill oil .
You may add oil (about 1 pint / 0.5 liters). The oil level may go into the (A)
Range (B)
range, but not above the (A) range.
You must add oil (about 1 quart / 1.0 liter). After adding oil, make sure that the
Range (C)
oil level is about in the middle of the (B) range.
WARNING
Engine oil can ignite when it touches hot engine parts. This can cause fires, burns, and other
severe injuries.
Never spill oil on the engine. Oil spilled on a cold engine can also cause a fire when the
engine warms up
Always make certain that you screw the cap of the engine oil filler opening back on tightly
after adding oil and that the dipstick has been pushed all the way back into the in the guide
tube. This helps prevent engine oil from leaking onto the hot engine when the engine is
running.
NOTICE
Do not start the engine if the engine oil level is above range (A). Contact an authorized
Volkswagen dealer or an authorized Volkswagen Service Facility. Otherwise the catalytic
converter and engine can be damaged!
When changing or topping off fluids, make sure that you pour the fluids into the correct
reservoirs. Adding the wrong type of operating fluids will cause serious malfunctions and
engine damage.
The engine oil level should never be above range (A). Otherwise oil can be drawn in by the
crankcase ventilation system and enter the atmosphere via the exhaust system.
Engine oil consumption

To provide effective lubrication and cooling for internal engine parts, all internal combustion engines
use some oil. Oil consumption varies from engine to engine and may change over the life of the
engine. Engines tend to use more oil during the break-in period than they do afterward, when oil
consumption has stabilized.
Under normal conditions, the rate of oil consumption depends on oil quality as well as viscosity, engine
speed (rpm), outside temperature, road conditions, the amount of oil dilution caused by condensed
water or fuel residue, and oxidation of the oil. Oil consumption may increase with engine wear over
time, until replacement of worn engine parts may become necessary.
Volkswagen recommends that you to check the engine oil level at regular intervals, preferably every
time you fill the fuel tank, and always before a long trip. Your vehicle may consume engine oil
depending on several variables. A maximum of 1 quart per 1200 miles (1 liter per 2000 km) would be
considered normal. New vehicles may consume more oil over the first 3000 miles (5000 km).
The oil pressure warning light is not an indicator of low engine oil level. If the warning light
stays on or flashes while driving (above 1500 rpm), a chime will sound. It indicates that the oil
pressure is too low. Stop the engine immediately, check the engine oil level and add oil if
necessary. If the engine oil level is normal, but the light continues to flash, do not keep driving
or let the engine idle, as damage may occur.
If you believe your engine uses too much oil, we recommend that you consult your authorized
Volkswagen dealer or authorized Volkswagen Service Facility so that the cause of your concern can
be properly diagnosed. Please keep in mind that accurate measurement of oil consumption requires
great care and may take some time. Your authorized Volkswagen dealer and authorized Volkswagen
Service Facility have instructions for how to measure oil consumption accurately.
Depending on the way the vehicle is driven and the operating conditions, oil consumption can be
up to 1 quart per 1200 miles (0.5 liter per 1000 km). Consumption may be higher for new vehicles
during the first 3000 miles (5000 km).
Changing engine oil

The engine oil must be changed according to the intervals specified in your booklet Warranty and
Maintenance.
Changing oil at regular intervals is very important because the lubricating properties of oil decrease
gradually during normal vehicle use. If you are not sure when to have the oil changed, ask your
Sometimes, engine oil should be changed more often than specified for normal use. Change oil more
frequently if you often drive short distances, in dusty areas or in stop-and-go traffic, or if you use your
vehicle where temperatures stay below freezing for long periods.
Volkswagen recommends that you have your oil and oil filter changed by an authorized Volkswagen
dealer or an authorized Volkswagen Service Facility . They have the required expertise and
special tools and will dispose of the old oil properly.
Detergent additives in the oil will make fresh oil look dark after the engine has been running a short
time. This is normal and no reason to change engine oil more often.
WARNING
If you must change the engine oil yourself, be sure to take the following precautions:
Always wear eye protection.
To reduce the risk of burns from hot engine oil, let the engine cool down completely
before beginning.
When removing the oil drain plug with your fingers, stay as far away as possible. Always
keep your forearm parallel to the ground to help prevent hot oil from running down your arm.
Drain the oil into a container designed for this purpose, one large enough to hold at least
the total amount of oil in your engine.
To reduce the risk of poisoning, never drain the oil into empty food or beverage
containers that might mislead someone into drinking from them.
Engine oil is poisonous and must be stored out of the reach of children.
Continuous contact with used engine oil is harmful to your skin. Always protect your skin
by washing thoroughly with soap and water.
Before changing the oil, first make sure you know where you can properly dispose of the old oil.
Dispose of the old oil an environmentally-responsible manner. Never dump the old oil on garden
soil, in wooded areas, in the street, into streams, rivers, or bodies of water, or down sewage drains.
Recycle used oil by taking it to a collection facility for used engine oil in your area, or contact an
authorized Volkswagen dealer or an authorized Volkswagen Service Facility.
Volkswagen recommends that you always have your oil and oil filter changed by an authorized
Volkswagen dealer or an authorized Volkswagen Service Facility. They have the required expertise
and special tools and will dispose of the old oil properly.
Engine coolant
Introduction
Warning light and engine coolant temperature gauge
Engine coolant specifications
Checking engine coolant level and topping off
Never do any work on the coolant system unless you

have the correct technical information and the proper tools, supplies, and operating fluids, and
If you are uncertain in any way, have the work done by an authorized Volkswagen dealer or an
Serious personal injury may result from improperly performed work.
More information:
Trailer towing
WARNING
Engine coolant is poisonous!
Always keep the coolant in its original container stored in a safe place.
To reduce the risk of poisoning, never store engine coolant in empty food or beverage
containers or in any other containers that might mislead someone into drinking from them.
Always keep engine coolant out of reach of children.
Always make sure there is enough of the correct coolant additive to provide proper
antifreeze protection at the coldest temperatures that can be expected where the vehicle will
be used.
At extremely cold temperatures, the coolant could freeze, causing the vehicle to break
down. The heater would also not work, and vehicle occupants could be without protection at
subfreezing temperatures.
Coolant and coolant additives can pollute the environment. Collect leaking operating fluids and
dispose of them properly in accordance with applicable environmental laws and regulations.
Warning light and engine coolant temperature gauge
Fig. 166 Engine coolant temperature gauge in the instrument cluster: A Engine cold; B Normal temperature
range; C Warning zone.
If the indicator in the engine coolant temperature gauge is located in the cold range (A), the engine
has not reached operating temperature. High engine speeds and heavy engine loads should be
avoided.
Under normal driving conditions, the needle should be in the middle of the gauge. The temperature
may go higher when the engine is working hard, especially in hot weather.
The following table explains what to do if the engine coolant warning light does not go out a few
seconds after the engine is started or lights up or starts flashing while driving.
Temperature
Flashes gauge needle Possible cause Proper response
fig. 166
Stop!
Pull off the road and stop as soon as you
can do so safely. Stop the engine and let it
cool down until the temperature needle is in
the normal range again. Check the engine
coolant level and add coolant if needed
318.
If the engine coolant level is correct or the
(C) Engine coolant
problem continues after adding coolant and
Warning zone temperature too high.
driving a short distance, do not drive any
farther. Contact the nearest authorized
Volkswagen dealer or authorized
If the coolant level is correct, the
overheating may be caused by a radiator
fan fault. Check the fuses and replace as
necessary
Temperature
Flashes gauge needle Possible cause Proper response
fig. 166
Check the engine coolant level after the

engine has cooled down and add engine
coolant if low
If the engine coolant level is correct or the
problem continues after adding coolant, do
(B) Engine coolant level too not drive any farther. Contact an
Normal range low. authorized Volkswagen dealer or
These instructions apply only when the
coolant temperature stays in the normal
range. Stop immediately if the needle goes
into the red warning zone (C).
Stop!
Get assistance from an authorized
Engine coolant system
Volkswagen dealer, an authorized
malfunction.
Volkswagen Service Facility, or another
qualified workshop.
Do not drive at high engine speeds or with

(A) The engine has not yet
heavy engine loads until the engine warms
Cold range warmed up.
up.
WARNING
NOTICE
Engine coolant specifications

The engine cooling system is filled at the factory with a mixture of specially conditioned water and at
least 40 percent of Volkswagen engine coolant additive G 13 (TL-VW 774 J). This engine coolant
additive is pink.
This mixture provides antifreeze protection down to -13 F (-25 C). It also helps to protect the light
alloy parts in the engine cooling system against corrosion. In addition, the mixture helps prevent
calcium deposits and increases the boiling point of the engine coolant.
To protect the engine, the mixture must always contain at least 40% coolant additive even in warm
weather or climates where antifreeze protection is not needed.
If more antifreeze protection is needed for climate conditions, the percentage of coolant additive can
be increased. However, the coolant additive percentage must never be more than 60%; otherwise,
antifreeze protection is reduced and the ability of the mixture to cool the engine is also reduced.
When adding engine coolant, use a mixture of distilled water and at least 40% coolant additive G 13
or G 12 plus-plus (TL-VW 774 G) for optimum corrosion protection .
Do not mix G 13 with G 12 plus or G 11. Mixing these coolant additives together significantly reduces
corrosion protection and can lead to engine damage that is not covered by any Volkswagen
Limited Warranty.
WARNING
Too little antifreeze protection in the engine cooling system can cause engine failure and
severe injuries.
Always make sure there is enough of the correct coolant additive to provide proper
antifreeze protection at the coldest temperatures that can be expected where the vehicle will
be used.
At extremely cold temperatures, the coolant could freeze, causing the vehicle to break
down. The heater would also not work, and vehicle occupants could be without protection at
subfreezing temperatures.
NOTICE
Never mix original Volkswagen engine coolant additives with other additives not approved by
Volkswagen. Mixing Volkswagen coolant additives with coolant additives made by other
manufacturers can seriously damage the engine and the engine cooling system.
If the fluid in the engine coolant reservoir is any color but pink, then G 13 was mixed with a
different engine coolant. If this is the case, the engine coolant must be replaced immediately.
Otherwise serious malfunctions or engine damage can occur!
Engine coolant and engine coolant additives can pollute the environment. Collect leaking
operating fluids and dispose of them properly in accordance with applicable environmental laws and
regulations.
Checking engine coolant level and topping off
Fig. 167 Coolant expansion tank in the engine compartment.
Fig. 168 Coolant expansion tank cap in the engine compartment.
If the coolant level drops too low, the engine coolant level/temperature warning light lights up.
Preparations
Park the vehicle on level ground.
Always let the engine cool down .
Open the engine hood .
There is a symbol on the cap of the engine coolant expansion tank fig. 168.
Checking engine coolant level

When the engine is cold, check the engine coolant level relative to the marking on the side of the
expansion tank fig. 167.
If the coolant level in the tank is below the minimum mark (min), add coolant. When the engine is
warm, the engine coolant level may be slightly above the upper edge of the marked range.
Adding engine coolant
Always protect face, hands and arms from hot escaping coolant or steam by covering the cap with
a large, thick rag.
Carefully unscrew the cap .
Add only new engine coolant according to Volkswagen specifications ( Engine coolant
specifications) .
The engine coolant level must be inside the marks on the side of the reservoir . Do not fill above
the top edge of the filling range!
Screw the lid tightly.
Even in an emergency, do not use any other kind of coolant additive if engine coolant meeting
Volkswagen specifications ( Engine coolant specifications) is unavailable! Instead, add distilled
water only . As soon as possible, have the correct coolant ratio restored using engine coolant
that meets Volkswagen specifications Engine coolant specifications.
WARNING
Hot steam and hot engine coolant can cause serious burns.
Never open the hood if you see steam or coolant escaping from the engine compartment.
Always wait until you no longer see or hear steam or coolant escaping from the engine.
Always let the engine cool down completely before carefully opening the hood. Hot
components will burn skin on contact.
When the engine has cooled down and you are ready to open the hood:
Apply the electronic parking brake and shift the transmission into Park (P) (automatic)
or Neutral (manual only).
Take the vehicle key out of the ignition.
On vehicles with Keyless Access, make sure that the remote control vehicle key is out
of range of the vehicle and that the vehicle cannot be started by depressing the starter
button
Always keep children and others away from the engine compartment and never leave
them unsupervised.
The engine coolant system is under pressure when the engine is hot. Never unscrew the
coolant expansion tank cap when the engine is hot. Hot coolant can spray out and cause
severe burns and other serious injuries.
Turn the cap slowly and very carefully in a counterclockwise direction while applying
light downward pressure on the top of the cap.
Always protect your face, hands, and arms from hot escaping coolant or steam by
covering the cap with a large, thick rag.
Never spill fluids on the engine or exhaust system when refilling. Spilling fluids onto hot
parts of the engine or exhaust system can cause a fire. Under some conditions, the ethylene
glycol in engine coolant can catch fire.
NOTICE
Use distilled water only when adding coolant! All other types of water contain chemical
compounds that can cause extensive corrosion damage to the engine. This can even lead to
engine failure. If you have added non-distilled water, take the vehicle immediately to an
authorized Volkswagen dealer or an authorized Volkswagen Service Facility to have the
coolant system drained, flushed, and refilled completely with the proper coolant.
Refill engine coolant only up to the top edge of the marked fill range . Excess engine
coolant may forced out of the engine cooling system when it gets hot and cause damage.
In the case of significant engine coolant loss, refill engine coolant only when the engine is
completely cooled down. Significant engine coolant loss is a sign of leaks in the cooling
system. Have the engine cooling system checked immediately by an authorized Volkswagen
dealer or an authorized Volkswagen Service Facility. Otherwise the engine may be damaged!
When changing or topping off operating fluids, make sure that you pour the fluids into the
correct reservoirs. Serious malfunctions and engine damage can result if you pour operating
fluids into the wrong reservoir.
Introduction
Warning light
Checking the vehicle battery electrolyte level
Charging, replacing, disconnecting and connecting the 12 Volt vehicle battery
The standard 12 Volt vehicle battery is part of the vehicle electrical system.
Never do any work on the vehicle electrical system unless you
have the correct technical information and the proper tools, and
If you are uncertain in any way, have the work done by an authorized Volkswagen dealer or
work.
Location of the vehicle battery

The 12 Volt vehicle battery is located in the engine compartment.
Explanation of the warnings on the vehicle battery
Symbol Meaning
Always wear eye protection!
Battery acid is highly corrosive. Always wear protective

gloves and eye protection!
Fire, sparks, open light and smoking are prohibited!
When a battery is charged, it produces hydrogen gas

which is highly explosive!
Always keep children away from battery acid and

vehicle batteries!
More information:
WARNING
Working on the batteries or the electrical system in your vehicle can cause serious acid
burns, fires, explosions, or electrical shocks. Always read and heed the following WARNINGS
and safety precautions before working on the batteries or the electrical system.
Before working on the electrical system, always switch off the ignition and all electrical
consumers and disconnect the negative () cable from the standard 12 Volt battery.
When you change a light bulb, always switch off the light first.
Always keep children away from battery acid and vehicle batteries in general.
Always wear eye protection. Never let battery acid or lead particles come into contact with
your eyes, skin, or clothing.
Sulfuric battery acid is very corrosive. It can burn unprotected skin and cause blindness.
Always wear protective gloves and eye protection. To reduce your risk of injury, never tilt the
batteries, as this could spill acid through the vents and burn you.
If you get battery acid in your eyes or on your skin, immediately rinse with cold water for
several minutes and then get immediate medical attention. If you swallow any battery acid,
get medical attention immediately.
When disconnecting the batteries from the vehicle electrical system, always disconnect
the negative cable () first and then the positive cable (+).
Always switch off all electrical consumers before reconnecting 12 Volt batteries.
Reconnect the plus cable (+) first and then the negative cable (). Never reverse the polarity
of the connections. This could cause a fire.
A highly explosive mixture of gases is given off when the battery is being charged.
Do not smoke and avoid fires, sparks, and open flames when working. Never create
sparks or electrostatic charges when handling cables and electrical equipment. Never short
circuit the battery terminals. High-energy sparks can cause serious personal injury.
Never use or attempt to charge a damaged or frozen battery, or a battery that was frozen
but has thawed. Charging a frozen or thawed battery could cause explosions and chemical
burns! Replace damaged or frozen vehicle batteries immediately. A dead battery can freeze at
temperatures around +32 F (0 C).
If the battery has a vent line or tube, make sure that it is properly connected to the battery.
Always make sure that the vent line is securely attached to a vehicle battery that is located
in the luggage compartment.
WARNING
California Proposition 65 Warning
Battery posts, terminals, and related accessories contain lead and lead components,
chemicals known to the State of California to cause cancer and reproductive harm. Wash
your hands after handling.
NOTICE
Do not expose the vehicle battery to direct sunlight for an extended period of time as
ultraviolet rays may damage the battery housing.
If the vehicle is left standing in the cold for a long time, protect the vehicle battery from
freezing. A battery will be permanently damaged by freezing.
battery has been replaced may change or delete system settings (including time, date, personal
convenience settings and programming). Check the settings and correct as necessary once the
vehicle battery has built up a sufficient charge.
Warning light
Lights
up
See an authorized Volkswagen dealer or an

authorized Volkswagen Service Facility. Have
the electrical system checked.
Alternator malfunction.
Switch off unnecessary electrical loads. The
vehicle battery will not be charged by the
alternator as you drive.
WARNING
NOTICE
Checking the vehicle battery electrolyte level
Fig. 169 In the engine compartment: Remove the cover from the vehicle battery.
Fig. 170 In the engine compartment: Open the sleeve covering of the vehicle battery.
Check the electrolyte level of the battery regularly if the vehicle has high mileage, in places with warm
climate and if the vehicle has an old battery. Otherwise the vehicle battery does not require
maintenance.
Preparations
Prepare the vehicle for work in the engine compartment Working in the engine compartment.
Opening the battery cover

Depending on the engine type, there are different kinds of battery covers:
With a hard cover fig. 169: Press on the tab (small arrow) and remove the cover upward.
With a soft cover fig. 170: Open the sleeve cover to the side.
Checking the vehicle battery acid level

If the lighting conditions are poor, use a flashlight so that you can clearly see the battery acid level
indicator and tell what color it is. Never use an open flame or an unprotected light source.
The round battery window (acid level indicator) on the top of the battery changes color,
depending on the battery's electrolyte level.
Color Response
Light yellow or Battery electrolyte level is too low. The battery may
colorless need to be replaced. Have it checked by an
authorized Volkswagen dealer or an authorized
Black Battery electrolyte level is satisfactory.

WARNING
Working on the batteries can cause serious acid burns, explosion, or electrical shock.
Always wear eye protection and protective gloves.
Sulfuric battery acid is very corrosive. It can burn unprotected skin and cause blindness.
Always wear protective gloves and eye protection.
Never tilt the vehicle battery. Acid could spill out of the battery vents and burn you.
Never open a vehicle battery.
several minutes and then get immediate medical attention.
If you swallow any battery acid, get medical attention immediately.
Charging, replacing, disconnecting and connecting the 12 Volt vehicle

battery
Charging the vehicle battery

Vehicle batteries should be charged by an authorized Volkswagen dealer or an authorized
Volkswagen Service Facility because the factory-installed battery requires a charger with overload
protection .
Replacing the vehicle battery

The battery in your vehicle is specially developed for its location, with special dimensions and safety
features. Before buying a new battery, ask an authorized Volkswagen dealer or authorized
Volkswagen Service Facility what batteries are suitable with regard to electro-magnetic compatibility,
dimensions, required maintenance, performance, and safety specifications. Have the battery replaced
by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility.
Only use maintenance-free vehicle batteries meeting standards TL 825 06 and VW 7 50 73. These
standards must date from August 2008 or later.
Disconnecting the vehicle battery

If the battery must be disconnected from the vehicle's electrical system, note the following:
Switch off all electrical systems and devices and the ignition.
Unlock the vehicle before disconnecting the battery; otherwise the alarm system will go off.
First disconnect the negative cable (-) and then the positive cable (+) .
Connecting the vehicle battery

Prior to reconnecting the battery, switch off all electrical systems and devices and the ignition.
Connect the positive cable (+) first and then the negative cable (-) .
After the battery is connected and the ignition is switched on, different indicator lights may come on.
They should go out after you drive a short distance at 10 12 mph (15 20 km/h). If the indicator
lights do not go out , contact an authorized Volkswagen dealer or an authorized Volkswagen Service
Facility and have the vehicle checked.
If the battery was disconnected for a long time, the next scheduled service may not be correctly
calculated and displayed Instrument cluster. The maximum permissible service and maintenance
intervals are shown in the Booklet Warranty and Maintenance booklet.
Vehicles with Keyless Access
If the ignition will not start after reconnecting the vehicle battery, lock the vehicle from the outside and
unlock it again Unlocking or locking the vehicle with Keyless Access. Then try to start the ignition
again. If the ignition cannot be switched on, contact an authorized Volkswagen dealer, an authorized
Volkswagen Service Facility, or another qualified workshop for assistance.
Automatic electrical load deactivation

If the vehicle battery drain is high, the intelligent onboard electrical system management automatically
takes steps to help prevent battery drain.
The idle speed is increased so that the alternator provides more power.
The power to devices that consume a lot of electricity is cut back or switched off completely.
When the engine is started, the power supply to the 12 Volt sockets is temporarily interrupted.
The onboard electrical system management cannot always keep the battery from being drained. For
example, the battery will drain if the engine is not running, but the ignition is switched on or the parking
lights are left on for a long time when parked.
Battery disconnection in an accident with airbag deployment

In vehicles with a battery in the luggage compartment, the electrical connection to the battery is
disconnected automatically in a collision with airbag deployment. This helps to prevent a short-circuit.
What drains the battery?

Long periods when the engine is not running, especially when the ignition is on.
Using electrical systems or devices when the engine is switched off.
Leaving the vehicle unlocked for several days when not in use.
The selector lever is left for a long period of time in any position other than (P) when the ignition is
switched off Automatic transmission: Selector lever.
WARNING
Failure to use the proper battery with proper mounting and connections may cause short
circuits, fires, and serious personal injuries.
Always use only maintenance-free or cycle-free, leakproof batteries with the same
specifications and dimensions as the original equipment battery. Specifications are listed on
the battery housing.
WARNING
When the vehicle battery is charged, it produces highly explosive hydrogen gas.
Charge vehicle batteries only in well-ventilated areas.
Never charge a frozen or thawed battery. A dead battery can freeze at temperatures
around +32 F (0 C).
You must replace the vehicle battery if it was frozen.
Incorrectly connected cables can cause a short-circuit. First connect the positive cable (+)
and then the negative cable (-).
NOTICE
Never disconnect a vehicle battery or connect 2 vehicle batteries to each other when the
ignition is switched on or the engine is running. Using the wrong battery can damage the
electrical system or electronic components and cause electrical malfunctions.
Never use a vehicle battery that does not meet specifications for the vehicle battery for your
vehicle. Using the wrong battery can damage the electrical system or electronic components
and cause electrical malfunctions.
Never connect power generating equipment, such as a solar panel or battery charger, to the
12 Volt socket in order to charge the vehicle battery. This can damage the vehicle's electrical
system.
Dispose of the vehicle battery according to regulations. Vehicle batteries contain poisonous
substances such as sulfuric acid and lead.
Battery acid can pollute the environment. Catch leaking operating fluids and dispose of them
properly.
Introduction
Washing the vehicle
Washing with a power washer
Cleaning windows and outside mirrors
Cleaning and changing the windshield wiper blades
Waxing and polishing vehicle paint
Caring for and cleaning chrome and aluminum parts
Cleaning wheel rims
Caring for rubber door and window seals
Deicing door lock cylinders
Cleaning the power sunroof and the sunshade
Undercoating
Cleaning the engine compartment
Regular and expert care helps to preserve the value of your vehicle. Such expert care may also be
one of the requirements of your New Vehicle Limited Warranty if corrosion repair or repainting is
necessary.
Vehicle care products are available from your authorized Volkswagen dealer or Authorized
More information:
WARNING
Vehicle care products can be dangerous. Improper use can cause accidents, burns,
poisoning, or other serious personal injuries.
Always store vehicle care products only in original containers that are securely closed.
Always read and heed all the instructions and all WARNINGS on the package.
To reduce the risk of poisoning, never use empty food or beverage containers that might
mislead someone into drinking from them.
Always keep vehicle care products out of the reach of children.
Always use such products outdoors or in well-ventilated areas, because harmful vapors
may be released when these products are used.
Never use fuel, turpentine, engine oil, nail polish remover or other volatile fluids for
vehicle care. They are poisonous and highly flammable.
WARNING
Improper care and cleaning of vehicle components can impact the safety features of the
vehicle and cause severe injuries.
Always clean and maintain vehicle components according to manufacturer's instructions.
Only use approved or recommended cleaners.
NOTICE
Vehicle care products containing solvents can damage plastics and other vehicle the materials.
Wash the vehicle only at specifically designated wash locations to prevent water contaminated
with oil, grease and fuel from entering the storm drain sewer system. In some areas it is against the
law to wash motor vehicles anywhere than other than at specified designated car washing locations.
When buying vehicle care products, try to choose those that are not harmful to the environment.
Never throw out vehicle care products with ordinary household waste. Always read and heed all
the instructions and all WARNINGS on the package.
Washing the vehicle

The longer insect splatter, bird droppings, tree sap, road dirt, industrial deposits, tar, soot, road salt,
and other aggressive materials stay on your vehicle, the more damage they do to the paint finish. High
temperatures (including strong sunlight) increase the corrosive effects. The vehicle underbody should
also be washed regularly and thoroughly.
Car wash
Pay close attention to the information provided by the car wash operator. Before going through a
car wash, be sure to take the usual precautions to help prevent, such as closing the windows, folding
back the outside mirrors, etc. If you have installed additional accessories on the vehicle, such as a
spoiler or an antenna, always ask the car wash operator if this poses a problem .
The paint finish is tough enough that the vehicle can normally be washed without problems in an
automatic car wash. However, the effect on the paint depends to a large extent on the type of car
wash. Volkswagen recommends using brushless car wash facilities.
To remove wax residue from the windows and avoid jerky windshield wiper movement, heed the
following tips Cleaning windows and outside mirrors.
Washing by hand
When washing by hand, first soften the dirt with plenty of water and then rinse off as much dirt as
possible.
Then clean the vehicle with a soft sponge, a washing mitt or brush using only light pressure. Start
on the roof and work down. Use special shampoo only on hard-to-remove dirt or grime.
Rinse the sponge or glove thoroughly and often.
Clean the wheels and under the door sills last. Use a different sponge or wash mitt.
WARNING
After the vehicle has been washed, the wet brakes or, in winter, brake discs or pads coated
with ice, react slower and need longer stopping distances.
CAUTION
Sharp edges under the vehicle can cut exposed skin.
Always protect your hands and arms from cuts on sharp metal edges when cleaning the
underbody, the inside of the wheel housings, etc.
NOTICE
The water temperature must not be more than +140 F (+60 C).
To help prevent damage to the paint, do not wash the vehicle in direct sunlight.
Do not use insect sponges, abrasive kitchen sponges or similar things to clean the vehicle.
These can damage the paint finish.
Never clean headlights with a dry cloth or sponge. Always use a wet cloth or sponge. For
best results use soapy water.
When washing or rinsing the vehicle in cold weather, do not let water get into the lock
cylinders or point the hose at gaps around the doors, hood, or rear hatch. The water could
freeze on the locks and seals and make it difficult to open the vehicle!
NOTICE
To help prevent vehicle damage in a car wash:
Compare the vehicle track width with the dimensions of the guide rails in the car wash to
help prevent damage to wheel rims and tires!
Switch off the rain sensor before driving through a car wash 122.
Make sure there is enough clearance for the height and width of the vehicle.
To help prevent paint damage to the engine hood, place wiper blades against the windshield
after they have dried. Do not let them snap back into place.
Fold the outside mirrors toward the vehicle body. Do not fold power mirrors manually!
Lock the rear hatch to prevent unintentional opening in the car wash.
Washing with a power washer

Always follow the instructions for the power washer. This especially applies to the pressure and
spraying distance .
Make sure there is enough distance to soft material such as rubber hoses or insulating material as well
as the sensors of the Park Distance Control system. The Park Distance Control system sensors can
are in the rear and, if applicable, front bumper .
Never use concentrated jet nozzles or so-called dirt blasters .

Never use a power washer to clean the engine compartment Cleaning the engine compartment.
WARNING
Improper use of power washers can cause serious invisible permanent damage leading to tire
failure and loss of vehicle control. This can cause accidents and severe personal injury.
Keep sufficient distance between water jet and tires. Never wash tires with a nozzle that
sprays the water out in a direct stream regardless of the distance to the tire and even for a
very short time.
Never use dirt blasters to clean tires. Even spraying from a relatively long distance for a
very short time can do visible or invisible damage to tires.
WARNING
After the vehicle has been washed, the wet brakes or, in winter, brake discs or pads coated
with ice, react slower and need longer stopping distances.
NOTICE
Water temperature should not be more than +140 F (+60 C).
To help prevent damage to the paint, do not wash the vehicle in direct sunlight.
When using a power washer or steam cleaner, only spray the rear assist sensors directly
for a short period of time and always keep the nozzle at least 4 inches (10 cm) from the sensor.
Do not clean icy or snow-covered windows with a power washer.
When washing or rinsing the vehicle in cold weather, do not let water get into the lock
cylinders or point the hose at gaps around the doors, hood, or rear hatch. The water could
freeze on the locks and seals and make it difficult to open the vehicle!


Spray windows and outside mirrors with a commercially available alcohol-based window cleaner.
Dry windows and mirrors with a clean chamois or a lint-free cloth. Do not use a chamois that has been
used to wipe painted surfaces because it will have absorbed an oily residue that will smear the glass
surfaces.
Use window cleaner or a silicone remover to remove rubber, oil, grease and silicone deposits .
Removing wax residue

Automatic car washes and vehicle care products can leave a wax residue on all glass surfaces.
These wax residues can only be removed with special cleaners or cleaning cloths. Wax residue left on
the windshield can cause the windshield wipers to grab and squeak instead of gliding smoothly. We
recommend that after every car wash you remove any wax residue left on the windshield with a
cleaning cloths/chamois G 052 522 A1 or equivalent.
Windshield wiper squeak and grab can be reduced by filling the windshield washer fluid tank with a
wiper fluid containing wax-removing agents. Make sure to maintain the proper mixing ratio when
refilling the washer fluid tank. Grease-removing cleaning agents cannot remove wax residue .
Special cleaners or cleaning cloths are available from your authorized Volkswagen dealer and
All-season Windscreen Clear G 052 164 A2 or equivalent. Mixing ratio in winter to -0.4 F (-18 C)
about 1:2 (1 part concentrate to 2 parts water), otherwise mixing ratio 1:4 in windshield washer
reservoir.
Window cleaning cloths / chamois G 052 522 A1 or equivalent for all windows and outside mirrors.
Removing snow
Remove snow from all windows and outside mirrors with an appropriate brush.
Removing ice
The best way to remove ice is with a deicer spray. When using an ice scraper always scrape in one
direction, never back and forth. Dirt can scratch the glass when moving the scraper backward.
WARNING
Dirty or fogged up windows reduce visibility and increase the risk of accidents and severe
injuries.
Don't drive until you have clear visibility through all windows.
Remove ice, snow and condensation from all inside and outside window surfaces.
NOTICE
Never mix recommended cleaning agents with other cleaning agents in the windshield
washer reservoir. If you do, this could cause sediments or other by-products that can clog the
windshield wiper nozzles.
Never use warm or hot water to remove snow and ice from windows and mirrors. This could
cause the glass to crack!
The heating elements for the rear defroster are on the inside of the rear window. Do not put
stickers over the heating elements on the inside of the rear window and never clean the inside
of the windows with corrosive or acidic cleaning agents or other chemicals that could damage
the heating elements.
Antennas installed on the insides of windows can be damaged by abrasive objects or by
corrosive or acidic cleaning agents or other chemicals. Do not place any stickers on the
windshield-integrated antenna and never clean the antenna with corrosive or acidic cleaning
agents or other chemicals.
Cleaning and changing the windshield wiper blades
Fig. 171 Changing the windshield wiper blades.
Fig. 172 Changing the rear window wiper blades.
Factory-installed wiper blades have a graphite coating. The graphite coating lets the wiper blades glide
smoothly over the windshield. If this coating is worn or damaged, the wipers may grab or squeak.
Check all wiper blades regularly. Wiper blades that grab and squeak must be replaced if worn or
damaged and cleaned if dirty .
Replace worn or damaged wiper blades immediately. Replacement blades may be purchased from
any authorized Volkswagen dealer or authorized Volkswagen Service Facility.
Lifting and tilting windshield wiper arms

Move the wiper arms into the service position before lifting them away from the windshield/rear
window (Note: no service position for rear wiper) Windshield wipers and washer.
It is not possible to lift the wiper arms away from the windshield when they are not in the service
position.
When lifting or replacing a wiper blade on a window, grip it only by its mounting and not by the blade
itself.
Cleaning the wiper blades

Lift the wiper arm(s) away from the windshield/rear window after moving them to the service
position (Note: no service position for rear wiper).
Using a soft cloth, carefully remove dust and dirt from the wiper blades.
If the blades are very dirty, carefully clean them with a sponge or cloth .
Carefully fold the wiper arm back down onto the windshield.
Changing wiper blades
Lift the wiper arm(s) away from the windshield.
Press and hold the release button fig. 171 (1) and pull off the wiper blade in the direction of the
arrow.
Install a new wiper blade of same length and type onto the wiper arm by pushing in the opposite
direction of the arrow until it latches.
Carefully fold the wiper arm back down onto the windshield.
Changing the rear window wiper blade

Lift the wiper arm away from the rear window.
Rotate the wiper blade 90 .
Support the wiper arm with one hand.
Pull the release on bracket in the direction of the arrow fig. 172 (1). This may require a moderate
force.
Fold back the wiper blade in the direction of the arrow (2) this will create a gap between the wiper
arm and the latch (3) (magnifying glass).
Pull the wiper blade to the direction of the vehicle outside (direction of arrow) (4).
Install a new wiper blade of same length and type onto the wiper arm by pushing in the opposite
direction of the arrow (4) until it latches.
Support the wiper arm with one hand.
Slide the release in the opposite direction of the arrow (3) in order to secure the wiper blade.
Carefully fold the wiper arm back down onto the window.
WARNING
Worn or dirty wiper blades reduce visibility and increase the risk of accidents and severe
injuries.
Always change wiper blades if they are damaged or worn, and if they cannot clean the
windows sufficiently.
NOTICE
Damaged or dirty wiper blades can scratch the windshield and the rear window.
Solvents, abrasive sponges and sharp-edged objects will damage the graphite coating on
the wiper blades.
Do not clean the windows with gasoline, nail polish remover, paint thinner or similar fluids.
To help prevent damage to the engine hood and the windshield wiper arms, lift the wiper
arms away from the windshield only when they are in the service position.
Waxing and polishing vehicle paint

Waxing
A good coat of wax helps to protect the vehicle paint. When water no longer forms small drops and
runs off when the paint is clean, apply a new coat of good hard wax to protect the vehicle again.
Even if a wax solution is used regularly at the car wash, Volkswagen recommends applying a coat of
hard wax at least twice a year to protect the paint.
Polishing
Polish your vehicle if the paint has lost its shine and the gloss cannot be brought back with wax.
The vehicle must be waxed after polishing if the polish used does not contain wax compounds to seal
the paint.
NOTICE
To help prevent damage, do not use hard wax or polish on matte-finished parts, plastic
parts, headlights or rear lights.
Do not wax or polish your vehicle if it is dirty, or in a sandy or dusty place.
Caring for and cleaning chrome and aluminum parts

Clean the surface using a clean, soft, lint-free cloth dampened with water.
If the surface is especially dirty, use a special solvent-free cleaning material.
Then polish chrome and aluminum parts with a soft, dry cloth.
NOTICE
To help prevent damage to chrome and aluminum parts:
Do not clean or polish in direct sunlight.
Do not clean or polish in sandy or dusty places.
Do not use abrasive cleaners or abrasive sponges.
Do not polish dirty surfaces.
Do not use cleaning materials that contain solvents.
Do not use hard wax.
NOTICE
Chrome wheel covers and hubcaps have an extra coating. Do not treat them with chrome care
or polishing products. Use regular paint care and polishing products.
Cleaning wheel rims

Cleaning steel wheels

Stubborn brake dust can be removed with an industrial cleaner. Clean steel wheels regularly with a
separate sponge.
Repair any paint damage on steel wheels before rust begins to form.
Cleaning alloy wheels

Every 2 weeks: Wash road salt and brake dust off alloy wheels, and clean the wheels with an acid-
free detergent. Every 3 months: Volkswagen recommends applying a hard wax compound to the
wheels.
If road salt and brake dust are not removed regularly, they can corrode the metal.
Use an acid-free detergent specifically designed for light alloy wheels. Do not use car polish or other
abrasive products.
If the protective coating is damaged, for example by stone impact, repair the damaged area right
away.
Caring for rubber door and window seals

The rubber seals around the doors and windows will stay soft and flexible, seal better and last longer if
the seals are treated regularly with a suitable rubber care product.
Before applying the treatment, use a soft cloth to remove dust and dirt from the rubber seals.
Do not apply any rubber care products to the rubber seals on the body in the areas around the
windows in the driver's and front passenger's doors. The product could run down onto the windows
and smudge them.
Deicing door lock cylinders

Volkswagen recommends using only genuine Volkswagen deicer spray with lubricating and
anticorrosive properties to deice door lock cylinders.
NOTICE
Lock deicers that contain grease solvents can cause the lock cylinder to rust.


Dirt and debris can impair the function of the power sunroof
not been opened.
Moving the sunshade to the cleaning position

Park the vehicle safely.
Open the power sunroof completely 62.
Press and hold the button fig. 173 (2) for about 5 seconds until the sunshade is completely
closed.
If the sunshade is heavily soiled, carefully clean it with a cloth and warm water.
NOTICE
Close the power sunroof completely before driving off. Driving with the sunshade in the
cleaning position can lead to damage to the vehicle.
NOTICE
Do not attempt to clean the drain tubes for the power sunroof. This could result in vehicle
damage caused by punctured or damaged drain tubes.
vacuum cleaner.
Applicable only in Canada

Dirt and debris can impair the function of the power sunroof
not been opened.
Moving the sunshade to the cleaning position

Park the vehicle safely.
Open the power sunroof completely
Press and hold the button fig. 174 (2) for about 5 seconds until the sunshade is completely
closed.
If the sunshade is heavily soiled, carefully clean it with a cloth and warm water.
NOTICE
Close the power sunroof completely before driving off. Driving with the sunshade in the
cleaning position can lead to damage to the vehicle.
NOTICE
Do not attempt to clean the drain tubes for the power sunroof. This could result in vehicle
damage caused by punctured or damaged drain tubes.
vacuum cleaner.
Undercoating
The vehicle underbody is coated to help protect it from corrosion and damage. The undercoating could
be damaged during normal use. We therefore recommend that you have the protective coatings on the
underbody and suspension inspected regularly, and repaired if necessary.
WARNING
Undercoating and rustproofing products can catch fire on the hot exhaust system or any
other hot engine component.
Never apply additional undercoating or rustproofing on or near the exhaust manifold, the
exhaust pipes, the catalytic converter, the heat shields, or any other hot vehicle component.
Cleaning the engine compartment

The engine compartment of a vehicle is a dangerous area Working in the engine compartment.
If necessary, the engine compartment should be cleaned by an authorized Volkswagen dealer or
authorized Volkswagen Service Facility. Incorrect cleaning procedures could remove corrosion
protection and damage electrical components, among other things. In addition, water could enter
directly into the vehicle interior through the plenum chamber .
Never use a power washer to clean the engine compartment .
If the engine compartment is extremely dirty, have it cleaned professionally by your authorized
Plenum chamber
The plenum chamber is located in the engine compartment between windshield and engine, under a
perforated cover. Outside air is taken into the vehicle interior from the plenum chamber via the climate
control system.
Regularly remove leaves and other loose objects from the plenum chamber cover by hand or with a
vacuum cleaner.
WARNING
Injuries, scalding, electric shock, accidents and fire hazards can occur while working on the
engine or in the engine compartment!
Before working in the engine compartment, be sure to familiarize yourself with the
necessary procedures and generally accepted safety precautions Working in the engine
compartment.
Volkswagen recommends having the work performed by an authorized Volkswagen dealer
or authorized Volkswagen Service Facility.
NOTICE
Spraying or pouring water (e.g. with power washer) into the plenum chamber can cause severe
damage to the vehicle.
Wash the engine compartment only in special wash bays so that the oily dirt and fuel residue that
are washed off the vehicle will not enter the sewage system. In some areas it illegal to wash the
engine compartment anywhere other than at such specified locations.
Introduction
Caring for upholstery
Cleaning upholstery, fabric trim and Alcantara

Care and cleaning of leather upholstery

Cleaning leatherette
Cleaning storage compartments and cup holders
Care and cleaning of plastic components, wood trim and instrument panel
Cleaning the safety belts
Modern clothing fabrics such as dark denim may not be completely colorfast. Even with normal use,
dye from these and other fabrics can rub off on seat upholstery and leave visible discolorations
(especially on light-colored seat upholstery). This is caused by a lack of colorfastness in the clothing
fabric, not by any fault in the seat upholstery fabric. To help prevent damage to the seat upholstery,
always make sure your clothing is colorfast. Volkswagen recommends having a qualified specialist
remove any discolorations from the seat upholstery.
The longer stains, dirt and other deposits remain on the surfaces of vehicle components and
upholstery, the more difficult it may be to clean them. If stains, dirt and deposits are left untreated for a
long period of time, they may become impossible to remove.
More information:
WARNING
Vehicle care products can be dangerous. Improper use can cause accidents, burns,
poisoning, or other serious personal injuries.
Always store vehicle care products only in original containers that are securely closed.
Always read and heed all the instructions and all WARNINGS on the package.
Always use such products outdoors or in well-ventilated areas, because harmful vapors
may be released when these products are used.
vehicle care. They are poisonous and highly flammable.
WARNING
Improper care and cleaning of vehicle components can compromise the vehicle's safety
features and cause severe injuries.
Always clean and maintain vehicle components according to manufacturer's instructions.
Only use approved or recommended cleaners.
NOTICE
Vehicle care products containing solvents can cause irreparable damage to damage
plastics and other vehicle the materials.
Stains, dirt and other deposits that contain aggressive substances or solvents can corrode
vehicle materials and cause permanent damage, even after brief contact with the surface.
Remove stains, dirt, and other deposits as quickly as possible and do not allow them to dry.
To help prevent damage, have stubborn stains removed by a professional who has the
necessary expertise and experience.
Suitable care products are available from authorized Volkswagen dealers and authorized
Volkswagen Service Facilities.
Caring for upholstery

Checklist
Please note the following when it comes to the care and preservation of the upholstery :
Open Velcro fasteners can damage upholstery, fabric, and trim. Before you get into the vehicle,
close all Velcro fasteners that could come into contact with upholstery fabrics and cloth trim.
Sharp-edged objects and items on clothing and belts (such as belt clips, mobile phone cases,
zippers, rivets, and rhinestones) can damage upholstery material and fabric trim. To help prevent
damage, do not let such items come into direct contact with the upholstery and fabric trim.
Dust and dirt particles in pores, folds, and seams can have a scouring effect on material and
damage the surface. Remove dust and dirt regularly to help prevent permanent surface damage.
Check clothing for colorfastness to help prevent upholstery discoloration, especially to light-colored
upholstery.
NOTICE
Disregarding the upholstery-related checklist may lead to damage or discoloration of
upholstery and fabric trim.
Please note and follow the points listed in the checklist.
Volkswagen recommends having any discoloration removed by an authorized Volkswagen dealer

or authorized Volkswagen Service Facility.
Cleaning upholstery, fabric trim and Alcantara
Cleaning upholstery on heated seats and power seats or seats with airbag components
Airbag components and electrical connectors may be installed in the driver seat, the front passenger
seat. Damaging, cleaning and handling incorrectly, or wetting or soaking these seat surfaces and
backrests can damage the vehicle electrical system and prevent the airbag system from working
properly .
Electrical components and connectors that could be damaged by incorrect cleaning or handling are
installed in power seats and heated seats . This can also result in damage to other parts of the
vehicle electrical system.
For this reason, read and follow these cleaning instructions:
Do not use pressure washers, steam cleaners, or cooling spray.
Do not use detergent pastes or mild detergent solutions.
Do not wet the surface completely.
Only use cleaning products approved by Volkswagen.
If you have questions or concerns, consult a professional cleaner.
Before using any cleaning agent, familiarize yourself with instructions and warnings on the
packaging.
Vacuum upholstery, fabric trim, Alcantara upholstery, and carpeting regularly with a suitable brush
attachment.
A soft sponge or a commercially available lint-free microfiber cloth may be used for general
cleaning .
Clean Alcantara surfaces with a damp cotton or wool cloth or a commercially available lint-free
microfiber cloth .
Upholstery and fabric trim with light generalized soiling can be cleaned with a commercially available
dry-foam cleaner.
If the upholstery fabric and fabric trim pieces are heavily soiled, see your authorized Volkswagen
dealer or authorized Volkswagen Service Facility before you begin cleaning to learn about suitable
cleaning options. If necessary, have the cleaning done by a professional.
Cleaning upholstery on non-heated seats, manual seats, or seats without airbag

components
Before using any cleaning agent, familiarize yourself with instructions and warnings on the
packaging.
Vacuum upholstery, fabric trim, Alcantara upholstery, and carpeting regularly with a suitable brush
attachment.
Do not use pressure washers, steam cleaners, or cooling spray.
A soft sponge or a commercially available lint-free microfiber cloth may be used for general
cleaning .
Clean Alcantara surfaces with a damp cotton or wool cloth or a commercially available lint-free
microfiber cloth .
Upholstery and fabric trim with light generalized soiling can be cleaned with a commercially available
dry-foam cleaner.
If the upholstery fabric and fabric trim pieces are heavily soiled, see your authorized Volkswagen
dealer or authorized Volkswagen Service Facility before you begin cleaning to learn about suitable
cleaning options. If necessary, have the cleaning done by a professional.
Removing stains
When treating stains, it may be necessary to clean the entire surface and not just the stain itself. This
is especially true if the entire surface has become dirty from normal use. Otherwise, the area that is
treated may become lighter than the untreated area. If you have questions or concerns, consult a
professional cleaner.
Type of stain Recommended cleaning for fabric and upholstery
Water-based stains, such Moisten a sponge with water and rub the stain gently with a circular
as coffee or fruit juice. motion.
Wipe dry with an absorbent cloth.
Persistent stains, such as Use only Volkswagen-approved cleaning products.

chocolate or make-up. If necessary, have the fabric or upholstery professionally cleaned.
Grease-based stains, such Use only Volkswagen-approved cleaning products.

as oil, lipstick, etc. If necessary, have the fabric or upholstery professionally cleaned.
WARNING
If there is a malfunction in the airbag system, the airbag may not deploy correctly or at all, or
it may deploy unexpectedly. This could cause fatal injuries.
Have the airbag system inspected immediately by your authorized Volkswagen dealer or
NOTICE
If the upholstery on power seats, heated seats, or seats with airbag components is wet,
electrical components and the vehicle electrical system could be damaged.
If the seating surface becomes soaked, have it dried and the system components checked
immediately by an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
Do not use steam cleaners because the steam could cause the dirt to penetrate deeper into
the fabric and make it impossible to remove.
Pressure washers and cooling sprays can damage the upholstery.
NOTICE
Clean only the carpet and floor mats with brushes. Other textile surfaces can be damaged
by brushes.
If detergent pastes or mild detergent solutions are applied with a damp cloth or sponge, the
surfactants in the detergent may cause visible lines to form at the edges of the area where the
detergent was applied. These lines are generally difficult or impossible to remove.
NOTICE
Do not soak Alcantara.
Do not treat Alcantara with leather care products, solvents, floor wax, shoe polish, stain
remover or similar products.
Do not use brushes for damp cleaning, because they can damage upholstery surfaces.
Do not use a steam cleaner, because dirt will penetrate deeper into the fabric.
Care and cleaning of leather upholstery

If you have questions regarding the care and cleaning of the leather upholstery in the vehicle, please
contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
Care and treatment

Natural leather requires special attention and care. Napa leather has a smooth surface. The intensity
of the color application determines the leather's appearance and texture. If you can see the leather
grain and other natural characteristics, this is an untreated napa leather that will provide very
comfortable seating. Delicate veins, closed scars, insect bites, folds, and a slightly clouded color
remain visible and represent authentic characteristics of the natural material. Untreated napa leather
has no protective coating. It is therefore more susceptible to damage. You should keep this in mind if
the leather is going to be exposed to severe wear from children, animals, or other factors. By contrast,
leather that has a protective coating is more robust. This has a positive effect on the leather's
durability in daily use. The typical natural characteristics are hardly visible or no longer visible at all,
but that has no impact on the quality of the leather itself. The typical characteristics of untreated
leather are much more distinctive than those of a surface-treated leather.
After each cleaning, apply cream that waterproofs the leather and protects it against the sun. Such
creams also nourish the leather, let it breathe, keep it flexible and moisturized. At the same time it
protects the surface.
Clean leather every 2 to 3 months and remove any new stains.
Treat leather with a suitable leather-care product twice a year .
Apply cleaning and conditioning materials sparingly and always with a dry, lint-free cotton or wool
cloth. Do not apply cleaning and conditioning materials directly to the leather.
Remove fresh stains such as ballpoint pen, lipstick, ink, shoe polish, etc. as soon as possible.
Preserve the leather's color. If necessary, refresh fading spots with a specially-colored leather
cream.
Wipe the leather with a soft cloth.
Cleaning
Volkswagen recommends using a slightly moistened cotton or wool cloth for general cleaning.
It is important not to let water soak through the leather or penetrate into seams.
Before cleaning leather surfaces, read and heed the information Cleaning upholstery on heated
seats and power seats or seats with airbag components.
Type of stain Cleaning
Heavy stains Apply a mild soapy solution with a cloth that has been wrung nearly
dry8.
Dab dry with an absorbent cloth.
8
Mild soap solution: 2 tablespoons of liquid soap in one quart of water.
Type of stain Cleaning
Water-based stains, such Remove fresh stains with an absorbent cloth.

as coffee, tea, juice, or If the stains are already dry, use an appropriate cleaning agent
blood.
.
Grease-based stains, such Remove fresh stains with an absorbent cloth.

as oil, lipstick, etc. Use an appropriate cleaning agent on stains that have not yet
penetrated the surface .
Special stains, such as Dab dry with an absorbent cloth.

ballpoint pen, marker, nail Clean with a special stain remover designed for leather.
polish, latex paint, or shoe
polish.
NOTICE
Stains that have been left in place too long will penetrate the surface of the leather and
cannot be removed.
Never treat leather with solvents, floor wax, shoe polish, stain remover or similar products.
Wipe up spilled liquids immediately with an absorbent cloth. Liquid can penetrate leather
surfaces and seams within a few seconds.
If the vehicle is left in the sun for a long time, cover the upholstery to protect the leather
from direct sunlight and to help prevent fading and discoloration.
Slight discoloration caused by wear and tear is normal.
Cleaning leatherette
Clean leatherette upholstery only with water and a mild soap solution.
Before cleaning leatherette surfaces, read and heed the information Cleaning upholstery on
heated seats and power seats or seats with airbag components.
NOTICE
Do not clean leatherette with solvents, floor wax, shoe polish, stain remover, or similar
products.
These can cause the material to become brittle and break. Sharp-edged objects and items
on clothing and belts (such as belt clips, mobile phone cases, zippers, rivets, and rhinestones)
can damage upholstery material and fabric trim.
If the vehicle is left in the sun for a long time, cover the upholstery to protect the leatherette
from direct sunlight and to help prevent fading or discoloration.

Some storage compartments and cup holders have a removable rubber insert at the bottom.
Moisten a clean, lint-free cloth with water and clean the parts.
If this is not sufficient, then use a special solvent-free care and cleaning product designed for
plastics.
Care and cleaning of plastic components, wood trim and instrument

panel
Moisten a clean, lint-free cloth with water and clean the parts.
Clean plastic components (inside and outside of the vehicle) and the instrument panel only with a
solvent-free care and cleaning product that is specifically designed for plastics and approved by
Volkswagen .
Clean wood trim with a mild soap solution.
WARNING
Using solvents or other improper cleaning products on surfaces where airbags are located
can change the way airbags deploy in a crash.
Products containing solvents will change the properties of the plastics and may cause
plastic parts to break and fly around when the airbag deploys in a crash, causing injury.
Never use solvents or cleaners on the steering wheel horn pad or on the instrument panel
because they can damage the airbag cover or change the stiffness or strength of the material
so that the airbag cannot deploy and protect properly.
When cleaning the horn pad and instrument panel, use only a soft, dry cloth or a cloth
moistened with plain water.
Cleaning the safety belts

If a safety belt is dirty, this can prevent the belt from working properly. Keep safety belts clean and
regularly check all safety belts for damage.
Safety belts must never be taken apart for cleaning.
Remove coarse dirt with a soft brush .

Carefully pull the dirty safety belt out of the retractor and keep it out.
Clean the safety belt with a mild soap solution.
After cleaning, always give the safety belts time to dry thoroughly before letting them retract. This
helps prevent damage to the retractor.
Do not let the safety belts retract until they are completely dry.
WARNING
Check the condition of all safety belts regularly. If you notice that the safety belt webbing,
hardware, retractor, buckle, or any other part of the safety belts is damaged, immediately
have an authorized Volkswagen dealer or authorized Volkswagen Service Facility replace the
safety belt with the correct replacement belt for your vehicle model and model year.
Never use chemical cleaning agents, solvents, or any substance that may damage or
weaken the safety belt webbing or any other parts of the safety belt. Never let the belts come
into contact with corrosive fluids or sharp objects. Otherwise, the safety belt webbing will be
significantly weakened.
After cleaning, always give the safety belts time to dry completely before letting them
retract. The moisture can damage the retractor and keep it from working properly.
Never let foreign objects or liquids get into the safety belt latch. This could prevent the
belt buckles and safety belts from working properly.
Never try to repair a damaged safety belt yourself. Never remove or modify the safety belts
in any way.
Safety belts that were subject to stress in an accident and stretched must be replaced with
a correct, new safety belt, preferably by an authorized Volkswagen dealer or authorized
Replacement after a crash may be necessary even if a safety belt shows no visible
damage. Anchorages that have been loaded must also be inspected.
Introduction
Break-in period
Parts and accessories
Operating fluids and equipment
Repairs and technical modifications
Repairs and other things that can affect Advanced Airbag performance
Notice about data recorded by vehicle control modules
Using the mobile phone without a vehicle integrated antenna - some important things to know
More information:
Safety belts
Airbag system
Roof rack
Trailer towing
Sockets
Braking and parking
Cruise control system (CCS)
Engine oil
Engine coolant
12 Volt Vehicle battery
booklet Radio
booklet Radio & Navigation system
booklet Mobile phone package
WARNING
Inappropriate spare parts and accessories as well as unprofessionally performed work,
modifications and repairs can cause vehicle damage, accidents and serious personal
injuries.
Volkswagen strongly recommends to only use accessories approved by Volkswagen and
Genuine Volkswagen Parts. These parts and accessories have been evaluated by
Volkswagen for their suitability, reliability and safety.
Have repairs and vehicle modifications performed by an authorized Volkswagen dealer or
authorized Volkswagen Service Facility. Authorized Volkswagen dealers and authorized
Volkswagen Service Facilities have the required tools, diagnostic equipment, repair
information, and trained personnel to properly replace any airbag in your vehicle and assure
system effectiveness in a crash.
Only install parts on the vehicle that are consistent with factory-installed parts with
respect to design and characteristics.
Never store, mount or attach objects, such as cup or phone cradles, on or next to the
airbag module covers or within the airbags deployment zones.
Only use wheel rim/tire combinations approved by Volkswagen for the respective vehicle
type.
Break-in period
Note applicable requirements for breaking in new parts.
Breaking in a new engine

A new engine must be carefully broken in during the first 1000 miles (1600 km). During the first few
hours of driving, the engine's internal friction is higher than later when all moving parts have been
broken in.
Engine life is influenced by how you drive the vehicle for the first 1000 miles (1600 km). Even
afterwards, driving at moderate engine speeds, especially when the engine is cold, will tend to reduce
engine wear and help the engine to last longer and go farther. But do not drive at an excessively low
engine speed, either. Always downshift if the engine is not running smoothly. For the first 600 miles
(1000 km):
Do not use full throttle.
Don't let the engine speed get above 2/3 of the maximum speed.
Do not tow a trailer.
From 600 to 1000 miles (1000 to 1600 km): Speed may gradually be increased to maximum
permissible road and engine speed.
New tires and brake pads

New tires and replacing tires Tires and wheels
Brakes About the brakes
Breaking in a new engine gently, will increase service life and reduce oil consumption.
Parts and accessories
Volkswagen recommends that you consult an authorized Volkswagen dealer or authorized
Volkswagen Service Facility before purchasing accessories, spare parts or other equipment. Always
do so if you want to install additional accessories or replace parts. Your authorized Volkswagen dealer
or authorized Volkswagen Service Facility can provide information about legal requirements and
factory-recommended accessories, spare parts, and other equipment.
WARNING
Improper vehicle modifications and repairs affect the performance of the airbag system and
cause malfunctions and severe personal injuries.
Never store, mount or attach objects, such as cup holders or phone cradles, on or next to
the airbag module covers or within the airbags deployment zones.
Objects on or near the surface where airbags are located can come loose and cause
serious personal injury if the airbag deploys.
Operating fluids and equipment

Operating fluids and parts that wear out with use (such as timing belts, tires, engine coolants,
engine oils, spark plugs, and vehicle batteries) are constantly being improved. For this reason, it is
important to have operating fluids changed and wearing parts replaced by an authorized Volkswagen
dealer or authorized Volkswagen Service Facility. Authorized Volkswagen dealers and authorized
WARNING
Improper use of operating fluids and equipment can cause accidents, serious personal
injuries, burns and/or poisoning.
Always store vehicle care products in a safe place in original-containers that are securely
closed.
Always read and heed all the instructions and all WARNINGS on the package before using
vehicle care products.
When using products that give off harmful fumes, always work outdoors or in a well
ventilated area.
vehicle care. They are poisonous and highly flammable. They could cause fires and
explosions!
NOTICE
Only refill with suitable operating fluids. When changing or topping off fluids, make sure
that you pour the fluids into the correct reservoirs. Adding incorrect fluids will cause serious
malfunctions and engine damage! Under no circumstances should you mix up operating fluids.
Otherwise serious malfunctions and engine damage can occur!
Accessories and other things installed in front of the cooling air intakes impair the
efficiency of the engine coolant. The engine can overheat under high outside temperatures or
under high engine loads!
Leaking operating fluids can pollute the environment. Collect leaking operating fluids in suitable
containers and dispose of them properly in accordance with applicable environmental laws and
regulations.
Repairs and technical modifications

Volkswagen guidelines for repairs and technical modifications must be followed !

Changes to electronic components and related software can cause malfunctions. These malfunctions
can also affect other systems that are related to the component or software that was modified. The
vehicle's operational safety can be seriously jeopardized, increased vehicle component wear can
occur, and the vehicle may no longer meet applicable emissions requirements.
Volkswagen recommends having all repairs and technical modifications performed by an authorized
Volkswagen dealer or authorized Volkswagen Service Facility using Genuine Volkswagen Parts.
Damage that is caused by improper repairs or unapproved technical modifications will not be covered
by any Volkswagen Limited Warranty.
WARNING
Improperly performed repairs and modifications can cause vehicle damage and malfunctions,
and can impair the efficiency of driver assistance systems. This can lead to accidents and
severe personal injuries.
Have repairs and vehicle modifications done by an authorized Volkswagen dealer or an
NOTICE
Improperly performed repairs and modifications can cause increased component wear and
result in vehicle emissions that no longer meet applicable requirements.
Repairs and other things that can affect Advanced Airbag performance
Repairs and modifications of front bumpers, doors, front seats, headliners and the chassis can affect
proper airbag performance and should be performed by an authorized Volkswagen dealer or
authorized Volkswagen Service Facility. These vehicle areas can contain important parts of the airbag
system.
Components of the airbag system can be damaged during removal, assembly and repair activities on
the airbag system itself or related components. Damage to airbag parts can prevent the system from
working properly in a collision.
Observe all regulations so that the effectiveness of the airbag is not affected and to prevent
disassembled parts from causing injuries and pollution. Authorized Volkswagen dealers, authorized
Volkswagen Service Facilities, and other qualified workshops are familiar with these regulations.
Changing the vehicle's suspension system can change the way that the airbag system works in a
crash. For example, using tire-rim combinations not approved by Volkswagen, lowering the vehicle,
changing the stiffness of the suspension, including the springs, suspension struts, shock absorbers
etc. can change the forces that are measured by the airbag sensors and sent to the electronic control
unit. Some suspension changes can, for example, increase the force levels measured by the airbag
sensors and sent to the electronic control unit and make the airbag system deploy in crashes in which
it would not deploy if the changes had not been made. Other kinds of changes may reduce the force
levels measured by the sensors and prevent the airbag from deploying when it should.
Never install leather upholstery on a vehicle that originally had cloth upholstery. Never install cloth
upholstery on a vehicle that originally had leather upholstery. The weight-sensing mat for the
Advanced Airbag system will not work properly if different upholstery is installed on the passenger seat
than the upholstery originally installed on the vehicle when it was originally manufactured.
WARNING
Changing the vehicle's suspension including use of unapproved tire-rim combinations can
change airbag performance and increase the risk of serious personal injury in a crash.
Never install suspension components that do not have the same performance
characteristics as the components originally installed on your vehicle.
Never use tire-rim combinations that have not been approved by Volkswagen.
WARNING
Leaving the optional safety belt extender attached to the safety belt buckle on the front
passenger seat when the safety belt is not being used will prevent the Advanced Airbag
System from working properly and can increase the risk of serious personal injury in a
collision.
Leaving the extender attached to the safety belt buckle when the front seat is occupied
and the safety belt is not being used will signal to the airbag control unit that the front
passenger seat is occupied and that the safety belt is being used. The electronic control unit
for the airbag system will then receive incorrect information that will
cause the safety belt pretensioner to deploy unnecessarily in collisions and
cause the front passenger airbag to deploy later in collisions in which the front airbag
would otherwise be triggered earlier to help protect an unrestrained front seat passenger.
Always remove the safety belt extender when it is not needed and stow it safely.
Never use the safety belt extender to secure a child restraint.
WARNING
Items stored between the safety belt buckle and the center console can cause safety belt
buckle to send the wrong information to the airbag control unit and prevent the Advanced
Airbag System from working properly.
Always make sure that nothing can interfere with the safety belt buckles and that they are
not obstructed.
WARNING
Improper care and servicing, and improper modification and repair work, can increase the
risk of personal injury and death by preventing an airbag from deploying when needed or
deploying an airbag unexpectedly:
Never repair, adjust, or change any parts of the airbag system.
All work on the airbag system, steering wheel, instrument panel, front seats or electrical
system (including the installation of audio equipment, cellular telephones and CB radios,
etc.) should be performed by authorized Volkswagen dealers or authorized Volkswagen
Service Facilities. They have the necessary manuals, training, and special equipment.
The airbag system can be activated only once. After an airbag has inflated, it must be
replaced.
Use only original equipment airbags approved by Volkswagen. Have them installed by a
trained technician who has the necessary tools and diagnostic equipment to properly replace
any airbag in your vehicle and assure system effectiveness in a crash.
Never permit salvaged or recycled airbags to be installed in your vehicle.
Undeployed airbag modules and safety belt pretensioners are classified as Perchlorate
Material. Special handling may apply see http://www.dtsc.ca.gov/hazardouswaste/perchlorate. Obey
all applicable legal requirements regarding handling and disposal of the vehicle or parts of its restraint
system, including airbag modules and safety belts with pretensioners. Authorized Volkswagen dealers
and authorized Volkswagen Service Facilities are familiar with the requirements, and we recommend
that you have them perform this service for you.

Your vehicle is not equipped with an Event Data Recorder (EDR).
EDRs, sometimes called crash recorders, are installed by some manufacturers for the express
purpose of capturing data for retrieval after an accident or crash event.
Some state laws restrict the retrieval or downloading of data stored by EDRs installed in a vehicle for
the express purpose of retrieving data after an accident or crash event without the owner's consent.
Although your vehicle is not equipped with an EDR, it is equipped with a number of electronic control
modules for various vehicle systems, such as engine management, emission control, airbags, and
safety belts.
These electronic control modules also record data during normal vehicle operation for diagnostic and
repair purposes. Their recording capability is limited to data (no sound is recorded). Only a small
amount of data is actually recorded over a very limited period of time, or stored when a system fault is
detected by a control module. Some of the data stored may relate to vehicle speed, direction, or
braking, as well as restraint system use and performance in the event of a crash. Stored data can only
be read and downloaded with special equipment.
Using the mobile phone without a vehicle integrated antenna - some

important things to know
Mobile or mobile telephones send and receive radio waves, sometimes called radiofrequency energy
(RF energy), both when they are being used and when they are in stand-by mode. Current scientific
literature indicates that radio waves that exceed a certain level can have effects on the human body.
Limits and guidelines have been established by governmental authorities and international committees
in an effort to keep the electromagnetic radiation from mobile phones at levels that will not cause
health problems. However, there is no scientifically based proof that wireless phones are absolutely
safe.
Therefore some experts recommend a precautionary approach regarding the use of mobile phones by
taking measures that lower the personal exposure to electromagnetic fields.
When using a mobile phone inside a motor vehicle without a proper connection to an integrated
vehicle telephone antenna, the personal exposure to electromagnetic fields will be higher than when
using the mobile telephone while properly connected to an integrated or other outside vehicle
telephone antenna.
Your vehicle may be equipped with an optional hands-free system that will permit many of the features
of compatible Bluetooth enabled mobile telephones to be used for greater convenience and is
consistent with the laws of an increasing number of states and localities that prohibit the use of mobile
telephones without some kind of hands-free device.
The hands-free system in your vehicle can be used with certain mobile phones that are connected by
wire and hardware connector or via compatible Bluetooth enabled phones with a cradle that is
designed to fit your mobile telephone. The special cradle offers several advantages: The phone cradle
must be safely secured to the base plate. Your phone is firmly attached to the instrument panel and is
within reach at all times. Placing the phone in its cradle permits it to be charged, but more importantly
connects the mobile phone to the vehicle's outside antenna. A mobile telephone that is properly
connected to the integrated or other outside vehicle telephone antenna will lower the personal
exposure to electromagnetic fields. You should also experience a better quality of service. Although a
mobile telephone can be used inside your vehicle without a cradle, the phone will not be securely
attached to the vehicle, will not be charged through the cradle wiring, and more importantly will not be
connected to the vehicle's integrated telephone antenna. The mobile phone will also not be recharged.
You might also experience more dropped calls and an overall impaired quality of the connection.
Therefore we strongly recommend that you use your mobile telephone in your vehicle only when it is
properly attached to an appropriate cradle mounted on a base plate on the instrument panel.
Because of the large number and variety of mobile telephones on the market and the frequency with
which new models are introduced, Volkswagen does not offer cradles for mobile telephones. Please
check with the manufacturer of the mobile telephone that you plan to use.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
WARNING
A mobile phone on the seat, instrument panel or in other places can be thrown around the
inside of the vehicle during a sudden braking maneuver, a crash or other accident and injure
vehicle occupants.
Never place or attach accessories or other objects (such as cup holders, telephone
brackets, notepads, navigation systems, large, heavy or bulky objects) on the doors, on the
windshield, over or near the area marked AIRBAG on the steering wheel, instrument panel,
backrests or between these areas and the occupant. Such objects could cause serious injury
in a collision, especially if an airbag inflates.
WARNING
Using a mobile phone or CB radio inside the vehicle without a properly installed and separate
outside antenna can be dangerous to your health and that of your passengers because the
electromagnetic radiation energy that mobile phones and CB radios emit may be above
established limits. This also applies if the outside antenna is not installed properly.
Always keep the mobile phone antenna at least 8 in (20 cm) away from pacemakers. Heart
specialists advise that mobile phones can adversely affect the way of pacemakers work.
Never carry a mobile phone that is switched on in the breast pocket directly over a
pacemaker.
If you suspect there may be interference with a pacemaker or other medical device, switch
the mobile phone off immediately.
Introduction
Operating your vehicle outside of the United States and Canada
Radio antenna and reception
Volkswagen service information
More information:
Exterior views
Technical data
WARNING
Improper vehicle care and use, as well as improper changes to the vehicle, increase the risk
of accidents and injuries.
Read your Owner's Manual and heed all WARNINGS.
NOTICE
Improper vehicle care and use, as well as improper changes to the vehicle, can result in
damage to the vehicle.
Perform service according to the specifications in booklet Warranty and Maintenance.
Read your Owner's Manual and heed all WARNINGS.
Operating your vehicle outside of the United States and Canada

Government regulations in the United States and Canada require that automobiles meet specific
emission regulations and safety standards. Therefore, vehicles built for the U.S. and Canada differ
from vehicles sold in other countries.
If you plan to take your vehicle outside the continental limits of the United States or Canada, there is
the possibility that:
Unleaded fuels for vehicles with catalytic converters may not be available.
Fuel may have a considerably lower octane rating and may cause engine damage.
Service may be inadequate due to lack of proper service facilities, tools or testing equipment.
Replacement parts may not be readily available.
DVD navigation systems for vehicles built for the United States and Canada will not necessarily
work in Europe, and may not work in other countries outside of North America.
NOTICE
Volkswagen is not responsible for mechanical damage that may result from substandard fuel
or service or the unavailability of Genuine Volkswagen parts.
Volkswagen is not responsible if the vehicle does not meet the respective legal
requirements in other countries and continents.
Radio antenna and reception

If the radio and navigation systems were installed at the factory, the radio antenna may be installed in
different locations in the vehicle:
On the inside of the rear window with the rear window defroster,
On the inside of the rear side windows,
On the inside of the windshield,
On the vehicle roof.
Antennas on the insides of windows are thin wires.
NOTICE
Antennas installed on the insides of windows can be damaged by abrasive objects or by
corrosive or acidic cleaning agents or other chemicals. Do not place any stickers on the
windshield-integrated antenna and never clean the antenna with corrosive or acidic cleaning
agents or other chemicals.
If electrical devices are operated close to the integrated windshield antenna, interference with AM
radio reception may occur.
Volkswagen service information

Volkswagen service information is published as soon as possible after model introduction.
To order service information contact:
Volkswagen Technical Literature Ordering Center
http://www.vw.techliterature.com
WARNING
Improperly performed repairs and modifications can cause vehicle damage and malfunctions,
and can impair the efficiency of driver assistance systems and the airbag system. This can
lead to accidents and severe personal injuries.
Have repairs and vehicle modifications performed by an authorized Volkswagen dealer or
Declaration of Compliance, Telecommunications and
Electronic Systems
Radio Frequency Devices and Radio communication Equipment User Manual Notice.
Radio-based equipment
Mobile phone package
Electronic immobilizer.
Remote control vehicle key.
Keyless Access locking and starting system.
These devices comply with:

FCC Part 15.19
These devices comply with Part 15 of the FCC Rules. Operation is subject to the following 2
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC Part 15.21
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
These devices comply with RSS-210 of Industry Canada.
Operation is subject to the following 2 conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment.
Reporting Safety Defects
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death,
you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition
to notifying Volkswagen of America, Inc. 3800 Hamlin Road, Auburn Hills, MI 48326.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect
exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot
become involved in individual problems between you, your dealer, or Volkswagen of America, Inc.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-
424-9153);
go to http://www.nhtsa.gov;
or write to:
Administrator
NHTSA
1200 New Jersey Avenue, SE.
Washington, D.C. 20590
You can also obtain other information about motor vehicle safety from
http://www.safercar.gov.
http://www.tc.gc.ca/eng/roadsafety/menu.htm
Introduction
Indicator lights
Catalytic converter
More information:
Shifting
Refueling
Fuel
Engine oil
Towing
WARNING
The vehicle exhaust system and the catalytic converter or diesel particulate filter get very hot.
This can cause a fire and serious personal injury.
Never park where parts of the hot exhaust system and catalytic converter could ignite
Never apply additional undercoating or rustproofing on or near the exhaust manifold,
exhaust pipes, catalytic converter, diesel particulate filter, or heat shields.
WARNING
California Proposition 65 Warning
Engine exhaust, some of its constituents, and certain vehicle components contain or emit
chemicals known to the State of California to cause cancer and birth defects and
reproductive harm. In addition, certain fluids contained in vehicles and certain products of
component wear contain or emit chemicals known to the State of California to cause cancer
and birth defects and reproductive harm.
Indicator lights
Lights
up
Lights
up
Have engine checked immediately by an

Engine control malfunction (Electronic
authorized Volkswagen dealer or authorized
Power Control).
Ease off the accelerator. Carefully drive to the

Engine control/monitoring system
nearest authorized Volkswagen dealer or
malfunction (engine Malfunction Indicator
authorized Volkswagen Service Facility. Have
Light - MIL).
engine checked.
Ease off the accelerator. Carefully drive to the

Misfire, which can damage the catalytic nearest authorized Volkswagen dealer or
converter. authorized Volkswagen Service Facility. Have
engine checked.
NOTICE
As long as the indicator lights or are on, expect engine malfunctions, increased fuel
consumption and loss of engine efficiency.
Catalytic converter
The catalytic converter provides exhaust gas after-treatment to help reduce pollutants in the exhaust
gas. To help ensure long service life of the exhaust system and gasoline engine catalytic converter:
Only use unleaded fuel.
Never completely empty the fuel tank.
Do not exceed the correct oil level Engine oil.
Do not tow the vehicle to start it, but use a jump-start instead Jump-starting.
If you experience misfires, loss of power or the engine is not running smoothly while driving, reduce
speed immediately and have the vehicle checked by an authorized Volkswagen dealer or authorized
Volkswagen Service Facility. Otherwise, gasoline could reach the exhaust system and get into the
atmosphere. The catalytic converter could also be damaged by overheating!
Frequently asked questions (FAQ)
If you suspect a malfunction or vehicle damage, read and follow the following advice before contacting
an authorized Volkswagen dealer or an authorized Volkswagen Service Facility. You may also find
helpful information under Characteristics and Checklist in the index.
Possible causes among

Description Possible remedy
others
Perform jump start

Vehicle battery dead.
Charge vehicle battery
Engine does not start. The wrong remote control

Use a valid remote control vehicle key
vehicle key is used.
Fuel level too low. Refuel
Battery in remote control Replace battery in the remote control

vehicle key dead. key
Vehicle cannot be locked
Too far away from vehicle. Move closer to vehicle.
or unlocked using remote
(out of range). Synchronize remote control vehicle
control vehicle key.
Buttons have been pressed key
too many times. Lock or unlock vehicle manually
Cold engine, braking support

Check the Noises entry in the
Unusual noises. systems, electronic parking
keyword index.
brake.
Check the Assistance systems entry

Odd driving behavior. Assistance systems activated.
in the index.
Convenience settings are

Correct convenience settings
Driver seat and outside stored.
mirrors move when
vehicle is unlocked. Memory-seat settings are Reassign seat setting
stored. Clear memory-seat memory
Front seats cannot be Vehicle battery dead. Charge vehicle battery

adjusted with power
controls. Fuse blown. Check fuse and replace if necessary
Settings were adjusted in the

Features do not work as Check and reset to factory settings if
Volkswagen Information
described in this manual. necessary
System.
Have the headlight range adjusted by

Headlights incorrectly an authorized Volkswagen dealer or an
Headlights do not light up adjusted. authorized Volkswagen Service
the road as they should. Light bulbs burned out. Facility. Adjust headlight range
Low beams not switched on. Change light bulbs
Switch on low beams
Possible causes among
Description Possible remedy
others
Vehicle battery charge too low. Charge vehicle battery
Electrical consumers do
Remaining fuel level too low. Refuel
not work.
Fuse blown. Check fuse and replace if necessary
Avoid short distance driving.

Short hauls.
Drive defensively.
Jumpy accelerator pedal.
Accelerate smoothly.
Electrical loads switched on. Switch off unnecessary loads.
Engine control malfunctioning. Have the malfunction corrected
Fuel consumption higher Tire pressure too low. Adjust tire pressure
than indicated.
Driving in the mountains. No direct corrective action possible.
Towing a trailer or driving with Check use.

a roof rack. Remove if not in use.
Driving with heavy payload. No direct corrective action possible.
Driving at high engine speed. Select a higher gear.

Lift points for the vehicle
Fig. 175 Front lift point for workshop hoist or floor jack.
Fig. 176 Rear lift point for workshop hoist or floor jack.
The vehicle may only be raised at the lift points shown in illustrations fig. 175 and fig. 176. If the
vehicle is lifted at different points, vehicle damage and serious injuries may occur .
Workshop hoists that use fluid cushions (receiving platforms) must not be used for lifting the vehicle.
There are many precautions that have to be followed when lifting a vehicle on a workshop hoist or
floor jack. Do not try to lift a vehicle on a workshop hoist or floor jack unless you have the training,
knowledge and experience to be able to do so safely.
Information about lifting the vehicle jack Lifting the vehicle with the vehicle jack.
WARNING
Improperly lifting your vehicle with workshop hoist or a floor jack can cause the vehicle to fall
off and cause serious personal injury.
Always read and heed the operating instructions from the floor jack manufacturer and
legal regulations if necessary before using the floor jack to lift the vehicle.
Never let anyone stay in the vehicle when it is being lifted or when it is off the ground.
Always lift your vehicle only at the designated lift points shown in the illustrations
fig. 175 and fig. 176. Not using the designated lift points can cause the vehicle to fall off
the floor jack when heavy parts such as the engine or transmission are removed.
Always make sure that the vehicle's lift points lie as flat as possible and centered on the
carrier plates of the floor jack.
Never start the engine when you have raised the vehicle on the floor jack. The engine
vibrations and vehicle movements could knock the vehicle off the floor jack.
support the weight of the vehicle.
Never use the floor jack as a ladder or step ladder.
Always make sure that the weight of the vehicle is not heavier than the lifting capacity of
the floor jack and safety stands being used.
NOTICE
To help prevent serious vehicle damage, never lift the vehicle by the engine oil pan,
transmission housing, or by the front or rear axles or suspension.
To help prevent damage to the underbody or chassis, always insert a rubber pad between
the hoist and the lifting points. In addition make sure the lifting arms have enough clearance.
The lifting arms should not touch side sills or other parts of the vehicle.
In an emergency
Introduction
Protecting yourself and the vehicle
More information:
Braking and parking
Vehicle tool kit
Changing a wheel
WARNING
A vehicle breakdown in traffic is dangerous and creates a great risk for you, your
passengers, and others.
Always stop the vehicle as soon as it is safe to do so. Move the vehicle a safe distance off
the road where it is safe to park and, if necessary, lock all doors in an emergency. Turn on
the emergency flashers and set up another warning device about 25 yards (25 meters) behind
the vehicle to warn approaching traffic.
Never leave children, disabled persons, or anyone who cannot help themselves alone in
the vehicle when locking the doors. This could result in people being trapped in the vehicle in
an emergency. Depending on the time of year, people trapped in the vehicle can be exposed
to very high or very low temperatures.
Protecting yourself and the vehicle
Fig. 177 In the center of the instrument panel: Switch for emergency flashers.
Obey all legal requirements regarding protecting a broken-down vehicle. For example, turning on the
emergency flashers and wearing a safety vest are mandatory in many countries.
Checklist
For your own safety and that of your passengers, carry out the following steps in the order listed
:
1. Park the vehicle at safe distance from traffic and on a suitable surface .
2. Switch on emergency flashers by pressing the switch fig. 177.
3. Apply the electronic parking brake to help prevent the vehicle from moving Braking and parking.
4. Shift the transmission into Park (P) (automatic) or Neutral (manual only)
5. Stop the engine and remove the key from the ignition switch Starting and stopping the engine.
6. Have all passengers exit and go to a safe location away from moving traffic, such as behind a
guard rail.
7. Take all vehicle keys with you when leaving your vehicle.
8. Set up a warning triangle or other warning device in order to alert other motorists and cyclists.
9. Let the engine cool down and get expert assistance if necessary.
If the emergency flashers are on, use the turn signal lever to indicate a direction or lane change, for
example when the vehicle is being towed. This temporarily interrupts the emergency flashers.
Switch on the emergency flashers when:

Traffic suddenly slows down or stops in front of you to warn those approaching from behind.
In any emergency situation.
If the vehicle breaks down.
When being towed.
Always obey traffic laws that govern the use of emergency flashers where you are driving.
If the emergency flashers are not working, a different method as permitted by law must be used to
alert other motorists and cyclists to the breakdown.
WARNING
sense.
WARNING
The vehicle exhaust system and the catalytic converter or diesel particulate filter get very hot.
They can cause fires and serious personal injury.
Never park where parts of the hot exhaust system or catalytic converter could ignite
flammable materials, such as dry grass, brush, leaves, spilled fuel, etc.
The vehicle battery will be drained if the emergency flashers are on for a long time even if the
ignition is switched off.
Introduction
Manually unlocking and locking the driver door
Manually locking the passenger doors
Opening the rear hatch from inside the luggage compartment
Emergency fuel filler flap release
Emergency release for the selector lever lock
The doors and the rear hatch can be manually locked and, in some cases, unlocked if necessary, for
instance because the power locking system or the remote control vehicle key malfunctions.
Emergency closing of the power sunroof is not possible with means in the vehicle. Contact an
authorized Volkswagen dealer or authorized Volkswagen Service Facility for assistance.
More information:
Vehicle key set
Doors
Rear hatch
Power sunroof
In an emergency
WARNING
Serious injuries can result if the emergency closing and opening procedures are used
carelessly.
people being trapped in the vehicle in an emergency.
Temperatures can quickly reach levels that can cause unconsciousness and death,
particularly to small children.
WARNING
Careless opening and closing of doors, the rear hatch, and the power sunroof is dangerous
and can cause serious personal injury.
Open or close doors, the rear hatch, and the power sunroof only when no one is in the
way.
NOTICE
To help prevent vehicle damage, carefully remove and properly reinstall parts after emergency
locking or unlocking.
Manually unlocking and locking the driver door
Fig. 178 Door handle on driver door: Concealed lock cylinder.
When locking the vehicle manually, all doors are locked. Keep the key turned in the locking position to
close all windows and the power sunroof (convenience closing). When the vehicle is unlocked
manually, only the driver door is unlocked. Keep the key turned in the unlocking position to open all
windows. Note the instructions for the anti-theft alarm system Anti-theft alarm system.
Unfold the key bit from the remote control vehicle key Vehicle key set.
Insert the key bit from below into the opening of the cover cap on the driver door fig. 178 (arrow)
and lift the cover cap off. Grasping the door handle and pulling slightly makes it easier to remove the
cap.
Insert the key bit into the lock cylinder of the driver door and unlock or lock the door.
Reinsert the cover cap from top to bottom and press until it clicks into place. Grasping the door
handle and pulling slightly makes it easier to install the cap.
Special considerations when unlocking

If the vehicle is equipped with an The anti-theft alarm system, the system remains activated for the
unlocked vehicle. But no alarm is triggered at first Power locking and closing system.
Open the driver door; the alarm will sound if the ignition is not switched on within about
15 seconds.
Switch on the ignition. The electronic immobilizer recognizes a valid remote control vehicle key
when the ignition is switched on and deactivates the anti-theft alarm system.
The driver door can be unlocked separately from the inside the vehicle by pulling the door handle
to open the door Power locking and closing system.
The anti-theft alarm system is not activated when the vehicle is locked manually with the key bit
Power locking and closing system.
Manually locking the passenger doors
Fig. 179 On the front side of the right rear door: Emergency lock, covered by a rubber seal.
Fig. 180 On the front side of the right rear door: Manual vehicle locking with the key bit in the vehicle key.
The passenger door and rear doors can each be locked manually. This will not activate the anti-theft
alarm system.
Open the door.
Remove the rubber seal on the front side of the door. The seal is marked with a lock fig. 179.
Unfold the key bit from the remote control vehicle key Vehicle key set.
Insert the key bit horizontally into the opening and press the small colored lever forward fig. 180.
Reinsert the rubber seal and completely close the door.
Make sure that the door is locked.
Repeat the procedure for other doors if necessary.
Have the vehicle checked immediately by an authorized Volkswagen dealer or an authorized
Doors can be unlocked and opened separately from inside the vehicle by pulling the door handle
once. If necessary, pull the door handle again Power locking and closing system.
Opening the rear hatch from inside the luggage compartment
Fig. 181 View from luggage compartment: Emergency unlocking rear hatch with the remote control vehicle
key.
If necessary, fold the rear seat backrest forward Seat functions.

Remove luggage in order to reach the rear hatch from the inside.
Unfold the key bit from the vehicle key fob Remote control vehicle keys
Insert the key bit into the opening in the rear hatch trim and press in the direction of the arrow
fig. 181 to unlock the rear hatch.
Emergency fuel filler flap release

There is no emergency release for the fuel filler flap. Contact an authorized Volkswagen dealer or an
authorized Volkswagen Service Facility for assistance.
Emergency release for the selector lever lock
Fig. 182 Removing the selector gate cover.
Fig. 183 Releasing the selector lever lock.
If the power supply fails (due to a dead vehicle battery, for example) and the vehicle has to be pushed
or towed, the emergency release must be used to move the selector lever to Neutral (N).
The emergency release is located under the selector gate cover on the right side when viewed in
driving direction.
Preparations
Set the electronic parking brake. If the electronic parking brake cannot be set, you must find
another way to help prevent the vehicle from moving.
Removing the selector gate cover

Pull upward on the cover around the selector lever sleeve fig. 182.
Slip the cover up and over the selector lever .
Emergency release for the selector lever

Push the release lever fig. 183 in the direction of the arrow and hold it in this position.
Press the release button fig. 182 (arrow) in the selector lever handle and shift the selector lever
to Neutral (N).
WARNING
Never shift the transmission out of Park (P) without first firmly applying the parking brake.
Otherwise, the vehicle can start to roll unexpectedly, especially on hills or inclines, and cause
an accident and serious injuries.
NOTICE
Even with the selector lever is in Neutral (N), the automatic transmission will be damaged if the
vehicle is towed (or you let it coast) for an extended period or at high speed with the engine
shut off.
Vehicle tool kit
Introduction
Storage
Contents
Folding chocks
When securing the vehicle after a breakdown, always obey all applicable legal requirements.
More information:
Lights
Brakes
Trailer towing
In an emergency
Changing a wheel
WARNING
Loose tools and other items in the vehicle tool kit and a loose compact spare wheel may be
thrown through the passenger compartment if you brake suddenly or steer sharply or are
involved in an accident. This can cause severe injuries.
Always make sure the vehicle tool kit and compact spare wheel are securely stowed in the
WARNING
Improper or damaged vehicle tools can lead to accidents and injury.
Never work with tool that are damaged or not right for the job.
Storage
Fig. 184 On the left in the luggage compartment: Storage compartment.
Fig. 185 On the right in the luggage compartment: Storage compartment.
The vehicle tool kit is in the storage compartment on the left in the luggage compartment fig. 184.
Rotate the quick-release fasteners 90 to open the storage compartment.
Completely retract the jack after use. Otherwise it will not fit in its compartment and cannot be
stowed safely.
Contents
Fig. 186 Contents of the vehicle tool kit.
The contents of the vehicle tool kit depend on the vehicle configuration. The following describes the
maximum contents.
Contents of the vehicle tool kit fig. 186

(1) Screwdriver with a hexagonal socket in the handle for removing or inserting previously
loosened wheel bolts. The screwdriver blade is reversible. The screwdriver may be stored
under the lug wrench.
(2) Folding chocks Folding chocks.
(3) Screw-in towing eye.
(4) Hubcap puller clips for removing hubcaps, full wheel covers or wheel bolt caps.
(5) Jack. Before putting the jack back, be sure to completely crank the jack down to its original
position. Then the crank must be clamped against the side of the jack.
(6) Lug wrench.
Folding chocks
Fig. 187 Unfolding the folding chock.
The folding chock is in the vehicle tool kit fig. 186.
Setting up the folding chock

Raise the support plate fig. 187 (1).
Insert both lugs of the securing plate completely in the elongated holes of the base plate (2).
Proper use
The folding chock can be used to block the wheel diagonal to the wheel which is to be changed.
The folding chock must be placed directly in front of and behind the wheel and may be used only on
firm surfaces.
WARNING
Improper setup or improper use of the folding chocks can cause accidents and injuries.
Never use damaged folding chocks.
Never use folding chocks to secure the vehicle on slopes.
Wheel trim
Introduction
Hubcaps
Wheel bolt caps
Wheel covers
More information:
Vehicle tool kit
Changing a wheel
WARNING
Unsuitable wheel covers and improper installation of wheel covers can cause accidents and
severe injuries.
Improperly installed wheel covers can come loose while driving and endanger other
motorists and cyclists.
Do not use damaged wheel covers.
Always make sure that the flow of air for brake system cooling is not blocked or reduced
before installing wheel covers. This applies to both factory installed wheel covers and
aftermarket wheel covers. Insufficient air supply may significantly increase stopping
distance.
NOTICE
To help prevent damage to the vehicle, be careful when removing wheel covers and be sure to
install them properly.
Hubcaps
Fig. 188 Pulling off hubcap.
To remove take the wire clip out of vehicle tool kit fig. 186 (4) and hook it into the edge of the
hubcap fig. 188.
Pull the hubcap off in the direction of the arrow.
To install press hubcap against the rim until it latches.
The hubcaps are designed to protect the wheel bolts and should be firmly reinstalled after the wheel
change.
Wheel bolt caps
Fig. 189 Pulling cover caps off wheel bolts.
Take the wire clip out of the vehicle tool kit Vehicle tool kit.
Insert the wire clip through the opening of the cover cap fig. 189 and pull off in the direction of
the arrow.
The caps are designed to protect the wheel bolts and should be installed again after the wheel
change.
Wheel covers
Fig. 190 Pulling the wheel cover off.
Pulling off the wheel cover

Take the lug wrench and wire clip out of the vehicle tool kit Vehicle tool kit.
Place the wire clip hook in one of the openings of the wheel cover.
Slide the lug wrench through the clip fig. 190 and pull the wheel cover off in the direction of the
arrow.
Installing the wheel cover

Make sure that the valve cutout is aligned with the valve, and press the wheel cover onto the wheel
rim. Make sure that the wheel cover is latched onto the rim along the entire circumference.
Changing a wheel
Introduction
Preparations for changing a wheel
Wheel bolts
Lifting the vehicle with the vehicle jack
Changing a wheel
After changing a wheel
Removing Fender Premium Audio subwoofer
Some vehicle designs and models are not delivered with a jack and lug wrench. In such cases,
Volkswagen recommends having tires and wheels changed by an authorized Volkswagen dealer or an
Change a wheel by yourself only if the vehicle is parked in a safe location, you are familiar with safety
procedures and the technical steps, and you have proper tools available. Otherwise, get expert
assistance.
The vehicle jack can only be safely used to change the wheel on a vehicle that has only one flat or
damaged tire. The vehicle will not have the support it needs from 3 fully inflated tires. The vehicle can
fall off the jack. If more than one tire on the vehicle is flat or damaged, do not lift the vehicle with the
vehicle jack. Instead, get expert assistance.
More information:
Exterior views
Vehicle key set
Tires and wheels
In an emergency
Vehicle tool kit
Wheel covers
WARNING
Changing a wheel, especially on the side of the road, can be dangerous. To help reduce the
risk of serious personal injury:
Always stop the vehicle as soon as it is safe to do so. Move the vehicle a safe distance off
the road where it is safe to change the wheel.
Always make sure that all passengers, especially children, are in a safe place outside the
vehicle and away from the vehicle and traffic (such as behind a guard rail).
Turn on the emergency flashers and set up another warning device about 25 yards (25
meters) behind the vehicle to warn approaching traffic.
Change a wheel by yourself only if you are familiar with the necessary steps. Otherwise,
get expert assistance.
Always switch the engine off, apply the electronic parking brake, and shift the
transmission into Park (P) (automatic transmission) or any gear (manual only) to help prevent
the vehicle from moving suddenly and slipping off the jack.
Always make sure that the ground is level and firm. If necessary, place the jack on a large
and sturdy board or on a similar ground support.
Always block the wheel diagonally opposite the wheel being changed with chocks or
similar things.
If you are towing a trailer, always unhitch it from your vehicle before starting to change
the wheel. Always apply the trailer brakes firmly and make sure the trailer cannot move
unintentionally.
Always use proper and undamaged tools when changing a wheel.
Once a wheel is lifted off the ground, having the transmission in Park (P) or in gear will not
prevent sudden vehicle movement.
Always use a jack that has been approved by the manufacturer for your vehicle. Never use
other jacks, even if they have been approved for use on other Volkswagen models.
To reduce the risk of losing control, crashes, and serious personal injuries, never loosen
the screws on rims with threaded rim rings.
After changing a wheel, have the wheel bolt tightening torque checked with an accurate
torque wrench.
After changing a wheel or tire, reset the Tire Pressure Monitoring System Tire Pressure
Monitoring System (TPMS).
Preparations for changing a wheel

Checklist
Getting ready to change a wheel. Follow these steps in the order listed here :
1. If you have a flat tire, move as far away from traffic as possible. Park the vehicle on a flat and level
surface where no part of the hot catalytic converter and exhaust system can come into contact with
flammable materials under the vehicle, such as dry grass, brush, spilled fuel, etc.
2. Apply the electronic parking brake to help prevent the vehicle from moving Braking and parking.
3. Automatic transmission: Shift the transmission into Park (P) Shifting.
5. Manual transmission: Engage a gear Shifting.

6. Have all passengers exit and go to a safe place, such as behind a guard rail.
7. Block the diagonally opposite wheel with chocks from vehicle tool kit or other suitable things.
8. If towing a trailer: Unhitch the trailer from the vehicle and park the trailer properly.
9. If the luggage compartment is loaded: Remove the luggage.
10. Raise and secure the luggage compartment floor.
11. If applicable: Remove the Fender Premium Audio subwoofer Removing Fender Premium Audio
subwoofer.
12. Unscrew the fastening screw with washer counterclockwise and remove.
13. Take the compact spare wheel out of the luggage compartment.
14. If applicable: Take off the wheel covers Wheel trim.
WARNING
sense.
Wheel bolts
Fig. 191 Changing a wheel: Loosening wheel bolts.
Loosen the wheel bolts only with the lug wrench that was supplied with the vehicle.
Loosen the wheel bolts only about 1 turn before lifting the vehicle with the jack.
If a wheel bolt does not come loose, carefully push the end of the lug wrench with your foot. Make sure
you are standing firmly on the ground and hold on to the vehicle for support.
Loosening the wheel bolts

Push the lug wrench over the wheel bolt all the way fig. 191.
Holding the lug wrench at the end, loosen the wheel bolt by turning it counterclockwise about 1
complete turn (360 ) .
Important information regarding wheel bolts
The design of rims and wheel bolts is matched to the factory-installed wheels. If different wheels are
installed, wheel bolts with the right length and bolt head shape must be used. The attachment of the
wheels and function of the brake system depend on this.
It may not be possible to use wheel bolts from different vehicles of the same model.
Wheel bolt tightening torque

Correctly tightened bolts for steel and alloy wheel rims should have a torque of 103 ft lbs (140 Nm) for
front-wheel drive vehicles and 88 ft lbs (120 Nm) for vehicles with four-wheel drive (4MOTION). After
changing a wheel, have the wheel bolt tightening torque checked right away with an accurate torque
wrench.
Before you check the tightening torque, replace corroded and difficult-to-turn wheel bolts and clean
the threads in the wheel hub.
Never grease or oil the wheel bolts and the threads in the wheel hubs. The bolts can come loose while
driving if greased or oiled, even if tightened to the required torque.
WARNING
Improperly tightened wheel bolts can come loose while driving and cause you to lose control
over the vehicle, resulting in accidents and serious injuries.
Only use wheel bolts that belong your vehicle and to the wheel being installed.
Never use different wheel bolts.
Wheel bolts and wheel hub threads must always be clean, easy-to-turn and free of oil and
grease.
Only use the lug wrench that is supplied with the vehicle to loosen the wheel bolts.
Loosen the wheel bolts only about one turn before lifting the vehicle with the jack.
Never grease or oil the wheel bolts and the threads in the wheel hubs. The bolts can come
loose while driving if greased or oiled, even if tightened to the required torque.
Never loosen bolted connections on wheel rims with bolted rim rings.
If the wheel bolts are not tightened to the proper torque, the wheel can come off the
vehicle when it is moving. Extremely high torque can damage the wheel bolts and/or their
threads.
Lifting the vehicle with the vehicle jack
Fig. 192 Lift points for the jack.

Fig. 193 Jack in position at the left rear lift point.
The jack must be positioned at one of the four lift points marked on the vehicle body (2 on each side
as shown in fig. 192). You must use the lift point closest to the wheel being changed .
The vehicle may only be lifted by a jack positioned at 1 of the 4 jack lift points.
Do not jack up the vehicle until all the wheel bolts on the wheel being changed have been loosened
Wheel bolts.
Checklist
For your own safety and that of your passengers, carry out the following steps in the order listed
:
1. Find a level spot on firm ground for lifting the vehicle.
2. Switch off the engine. Automatic transmission: shift the transmission into Park (P), Manual
transmission only: shift into a gear Shifting. Then apply the parking brake to help prevent the
vehicle from moving Braking and parking.
3. If towing a trailer: Unhitch the trailer from the vehicle and park the trailer properly.
4. Straighten the steering wheel so that the front wheels point straight forward.
5. Block the diagonally opposite wheel with chocks or other suitable things.
6. Loosen the wheel bolts of the wheel to be changed
7. Remove the jack and tools from the vehicle.
8. Find the jack lift point on the vehicle frame that is closest to the wheel to be changed.
9. Crank up the jack so that it still just fits underneath the lift point.
10. Position the jack so that its base is directly underneath the lift point fig. 193, making sure that
the entire base of the jack rests securely on the ground.
11. Align the jack and wind up the jack claw at the same time, until the claw cradles the vertical rib
underneath the vehicle A / B.
12. Continue cranking up the jack until the wheel is just a little off the ground.
WARNING
Improper use of your vehicle jack can cause the vehicle to fall off the jack leading to serious
personal injury. To help reduce the risk of serious personal injury:
Use only jacks approved by Volkswagen for the vehicle. Other jacks might slip, even those
approved for other Volkswagen models, but not for your vehicle.
Always set up the jack on firm and level ground. The vehicle may slip off the jack if the
jack is resting on soft or sloping ground. If necessary place a sturdy board under the jack.
On a hard, slippery surface (such as a tiled floor), use an anti-skid rubber mat or
something similar to prevent the jack from slipping.
Position the jack only at the described vehicle lift points. Before you raise your vehicle,
always make sure the jack claw properly grips the vertical rib under the sill so that the jack
does not slip off when you are raising the vehicle .
Never have any part of your body (such as your arm or leg) under the vehicle when it is
supported by the jack. Never let other persons have any part of their body under the vehicle,
either!
support the weight of the vehicle.
Never lift the vehicle when it is tilted or inclined to one side or the engine is running.
Never lift the vehicle when more than one tire is flat or damaged.
Do not start the engine while the vehicle is supported by a jack. Engine vibrations may
cause the vehicle to slip off the jack.
WARNING
sense.
Changing a wheel
Fig. 194 Changing a wheel: Remove previously loosened wheel bolts using the screwdriver handle.
Removing the wheel
Review the checklist Preparations for changing a wheel.
Loosen the wheel bolts Wheel bolts.
Lift the vehicle Lifting the vehicle with the vehicle jack.
Completely unscrew and remove the previously loosened wheel bolts using the hexagonal socket
in the screwdriver handle fig. 194. Place the wheel bolts on a clean surface.
Remove the wheel.
Installing a spare tire or a compact spare wheel

If the tire is a unidirectional tire, be sure to install it in the proper rolling direction Unidirectional tires.
Place the spare tire or compact spare into place on the vehicle.
Screw in all wheel bolts clockwise and tighten them slightly using the hexagonal socket in the
screwdriver handle.
Lower the vehicle with the jack.
Use the lug wrench to firmly tighten all wheel bolts (turn clockwise) . Do not tighten them in
sequence! Tighten any wheel bolt to begin, then tighten the wheel bolt diagonally opposite the first
bolt, and so forth.
Install the wheel bolt caps, center wheel hubcap, or wheel cover, if any Wheel trim.
WARNING
Wheel bolts that are tightened or installed improperly can come loose, causing loss of
vehicle control, a crash, and serious personal injury.
Always keep wheel bolts and threads in the wheel hub clean and free of oil and grease.
The wheel bolts must turn easily and must be tightened with the right torque.
Use the hexagonal socket in the screwdriver handle only to turn the wheel bolts when they
are loose, never to loosen them or tighten them firmly.
WARNING
Improper use of a compact spare tire can cause loss of vehicle control, a crash or other
accident, and serious personal injury.
Never use a compact spare tire if it is damaged or worn down to the wear indicators.
Never drive faster than 50 mph (80 km/h) with a compact spare tire. Avoid full-throttle
acceleration, heavy braking, and fast cornering!
Never drive more than 125 miles (200 km) with a compact spare wheel that is installed on
the front axle (drive axle).
Replace the compact spare with a normal wheel and tire as soon as possible. Compact
spare tires are designed for brief use only.
After changing a wheel

Clean the tools in the vehicle tool kit if necessary and stow them in the left storage compartment in
the luggage compartment Vehicle tool kit.
Securely store the compact spare wheel or the wheel you took off the vehicle in the luggage
compartment.
Have the wheel bolt tightening torque immediately checked with a torque wrench Wheel bolts.
Have the damaged wheel replaced as soon as possible.
The Tire Pressure Monitoring System must be recalibrated after each tire change Tire
Pressure Monitoring System (TPMS).
Removing Fender Premium Audio subwoofer
Fig. 195 Under the luggage compartment floor: Fender Premium Audio subwoofer.
The subwoofer is located under the luggage compartment floor.
Removing the subwoofer

Follow these steps in the order listed here:
1. Completely unscrew the fastening screw fig. 195 (2) counterclockwise and remove with metal
cap.
2. Grasp the subwoofer by the handles (3) and partially remove it from the recess.
3. Disconnect the electrical connector (1) from the subwoofer by pressing the release tab in the
direction of the arrow (close-up), then pulling the connector out of the socket.
4. Place the subwoofer in a clean storage location.
Reinstalling the subwoofer

1. Grasp the subwoofer by the handles (3) and put it down close enough to allow the electrical
connector (1) to be reconnected.
2. Reinstall the subwoofer and put it back into the recess.
3. The arrow must be pointing toward the front of the vehicle (close-up).
4. Reinstall the fastening screw with metal cap and tighten it (2) clockwise.
5. Lower the luggage compartment floor and guide it downwards back into place.
Fuses
Introduction
Fuses in the vehicle
Replacing blown fuses
Due to ongoing development of the vehicle, configuration-dependent allocation of fuses and the
combined fuse protection of multiple loads with one fuse, an up-to-date overview of the fuse location
per load is not possible at the time of printing. Detailed information regarding fuse box layout is
available from authorized Volkswagen dealers and authorized Volkswagen Service Facilities.
In general, one fuse can protect several loads. One load can also be protected by several fuses.
Find out why the fuse blew and correct the problem before replacing a blown fuse. If a newly replaced
fuse blows again after a short time, the electrical system should be checked by an authorized
More information:
WARNING
High voltage systems in the engine compartment can cause electrical shocks, severe burns,
and even death!
Never touch ignition cables. Never touch other components of the high voltage electronic
ignition system.
Avoid short circuits in the electrical system.
WARNING
Using the wrong fuse, using a blown fuse that has been repaired, and using metal objects in
place of fuses to complete the electrical connection in the circuit can cause fires and serious
personal injury.
Never replace a fuse with one that has a higher amp rating. Replace a blown fuse only with
a fuse of the same amperage (same color and same imprint) and same overall size.
Never repair fuses.
Never replace fuses with a metal strip, a paper clip, or a similar object.
NOTICE
To help prevent damage to the electrical system, switch off all lights and accessories,
switch off the ignition, and remove the key from the ignition switch before replacing a fuse.
If a fuse is replaced with a fuse with higher amperage, this can also cause damage at
different locations in the electrical system.
Open fuse boxes must be protected from dirt and moisture. Dirt and moisture in fuse boxes
can cause damage to the electrical system.
Fuses in the vehicle
Fig. 196 On the driver side in the instrument panel: Fuse box cover.
Fig. 197 In the engine compartment: Fuse box cover.
Replace a blown fuse only with a fuse of the same amperage (same color and same imprint) and
same overall size.
Fuse color coding
Color Current strength in amps
Purple 3
Light brown 5
Brown 7.5
Red 10
Blue 15
Color Current strength in amps
Yellow 20
White or clear 25
Green 30
Orange 40
Opening the fuse box in the instrument panel

Open storage compartment and pull back firmly in the direction of the arrow fig. 196.
Opening the fuse box in the engine compartment

Move the release tabs in the direction of the arrows to unlock the fuse box cover fig. 197.
Remove the cover upward.
To install push the cover onto the fuse box. Move release buttons back opposite the direction of
the arrows, until they audibly latch.
NOTICE
To help prevent vehicle damage, be careful when removing fuse box covers and be sure to
reinstall them properly.
Open fuse boxes must be protected from dirt and moisture. Dirt and moisture in fuse boxes
can cause damage to the electrical system.
The vehicle contains other fuses in addition to those mentioned in this section. Have these fuses
replaced by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility.
Replacing blown fuses
Fig. 198 Illustration of a blown fuse.

Fig. 199 Removing or inserting a fuse using the plastic tweezers.
Preparations
Switch off the headlights, the ignition, and all electrical consumers.
Open the appropriate fuse box Fuses in the vehicle.
Identifying blown fuses

A blown fuse can be recognized by the burned metal strip fig. 198.
Shine a flashlight on the fuse. This makes it easier to tell if the fuse has blown.
Replacing the fuse

If needed, remove the plastic tweezers from the fuse box cover.
For small fuses, slide the tweezers fig. 199 (1) onto the fuse from the top A.
For larger fuses, slide the tweezers (1) onto the fuse from the side B.
Pull out the blown fuse.
If the fuse is blown, replace the fuse with a new fuse of the same amperage (same color and same
imprint) and same overall size .
If necessary, replace the plastic tweezers in the fuse box cover.
Replace the cover.
NOTICE
If a fuse is replaced with a fuse with higher amperage, then damage can occur at various
places in the electrical system.
Replacing light bulbs
Introduction
Indicator light
Information on light bulb replacement
Replacing light bulbs in the Halogen headlight
Replacing light bulbs in the HID-High Intensity Discharge (Xenon) headlight
Replacing light bulbs in the front bumper
Replacing light bulbs in the rear hatch
Replacing light bulbs in the vehicle body
Replacing license plate light bulbs
Replacing the light bulb in the backup lamp
Replacing a light bulb requires a certain amount of skill. If you are uncertain about how to proceed,
Volkswagen recommends having the light bulb changed by an authorized Volkswagen dealer or an
authorized Volkswagen Service Facility. Special training and knowledge are generally required when
other vehicle parts must be disassembled to replace a bulb, or when HID High Intensity Discharge
(Xenon) lamps must be replaced.
You should always keep a box in the vehicle with all the replacement bulbs required for traffic safety.
Replacement bulbs are available from your authorized Volkswagen dealer or Authorized Volkswagen
Service Facility. The laws of some countries explicitly require you to have replacement bulbs in the
vehicle.
Driving with outside lights that do not work may be against the law.
Additional light bulb specifications

Some factory-installed light bulbs in the headlights or the rear lights may have different specifications
than conventional light bulbs. Specifications are on the glass bulb or on the metal base.
More information:
Exterior views
Lights and vision
Vehicle tool kit
Fuses
WARNING
Crashes and other accidents can happen when you cannot see the road ahead and when you
cannot be seen by other motorists.
WARNING
Improper replacement of burned out headlights and other light bulbs can cause serious
personal injury.
Stop! Always read and heed the WARNINGS before doing any work in the engine
compartment Working in the engine compartment. The engine compartment of any motor
vehicle is a potentially dangerous area, and work in this area can lead to serious personal
injury.
HID High Intensity Discharge (Xenon) get power from a high voltage source that can
cause severe personal injury and even death if handled improperly.
H7/H15 bulbs and HID High Intensity Discharge (Xenon) are under high pressure and can
explode if handled improperly.
Always let a burned out light bulb cool down before replacing it.
Never replace a light bulb unless you are familiar with all of the necessary procedures. In
particular, never remove a headlight unless you know exactly how to carry out the job and
have the correct tools and light bulbs.
If you are uncertain about what to do, have the work performed by an authorized
Volkswagen dealer, an authorized Volkswagen Service Facility, or another qualified
workshop. Serious personal injury may result from improperly performed work.
We strongly recommend that you always have HID High Intensity Discharge (Xenon)
lamps and H7/H15 bulbs replaced by a qualified technician.
Do not touch the glass of light bulbs with your bare hands. Fingerprints left on the bulb
evaporate due to the heat when the bulb is switched on and cause the reflector to cloud.
There are sharp edges on and around the headlight housing in the engine compartment
and the rear light housing. Wear hand protection if you replace bulbs.
NOTICE
After replacing a headlight bulb or other light bulb, always make sure that the rubber covers or
plastic caps have been properly and securely reinstalled to help prevent water from getting
into the electrical connections and headlight housing and damaging the electrical system.
Indicator light
Lights
up
Light bulb of the exterior vehicle lighting

Replace the light bulb that isn't working.
not working.
WARNING
NOTICE
Failure of a single LED within a taillight is not indicated. However, the indicator light will come
on if all LEDs fail.
Information on light bulb replacement

Checklist
Steps for replacing a light bulb. Please carry out these steps only in the order listed .
1. Stop the vehicle in a safe place on level and firm ground at a safe distance from traffic.
2. Luggage compartment cover
3. Set the electronic parking brake to help prevent the vehicle from moving Braking and parking.
4. Turn the light switch to 0 position Lights.
5. Move the turn signal lever to neutral position Lights.
6. Automatic transmission: Shift the transmission into Park (P) Shifting.
8. Manual transmission: Engage a gear Shifting.
9. Let orientation lighting go out Lights.

10. Let the burned out light bulb cool down.
11. Check if the fuse is blown Fuses.
12. Replace the burned out light bulb according to instructions . Always replace a burned-out
light bulb with a good bulb with the same specifications. Specifications are on the glass bulb or on
the metal base.
13. Never touch the glass of the light bulb with your bare hands. Fingerprints can cloud the outer
surface of the light bulb when heated, affecting the lighting power, clouding the reflector, and
reducing the brightness.
14. Always make sure that the new bulb works. If the bulb does not work, it may not be installed
correctly; the connection plug may not be completely seated; the corresponding fuse may be
burned out; or the bulb may be bad.
15. Always have the headlights adjusted by an authorized Volkswagen dealer or an authorized
Volkswagen Service Facility after a headlight bulb has been replaced.
WARNING
sense.
NOTICE
Always insert and remove lamps carefully to avoid damage to the vehicle paint or to other
parts of the vehicle.
Replacing light bulbs in the Halogen headlight
Fig. 200 In the engine compartment: Cover 1 on the left headlight for the low beam bulb holder 3 and cover 2
for the parking light bulb holder 4, turn signal bulb holder 5 and high beam or daytime running light bulb 6.
The following instructions only apply to vehicles with halogen headlight bulbs. Contact your authorized
Volkswagen dealer or an authorized Volkswagen Service Facility for assistance with HID headlight
replacement.
Only perform these steps in the specified order:
fig. 200 Low beam Parking light Turn signal High beam
headlight headlight or
daytime running
light
1. Please review and follow the checklist
2. Open the engine hood
3. Turn the cover (1)

A on the back of
the headlight
Remove the rubber cover (2) A on the back of the headlight.
counterclockwise
until it stops and
remove the cover.
fig. 200 Low beam Parking light Turn signal High beam
headlight headlight or
daytime running
light
4. Turn the bulb Unclip the bulb Unclip the parking Turn the bulb (6) B
holder (3) B holder (4) B light bulb holder (4) counterclockwise
counterclockwise upward out of the B upward out of the until it stops and
until it stops and guide and remove guide and remove it remove it toward the
remove it toward it toward the rear toward the rear with rear.
the rear with the with the bulb. the bulb.
bulb. Turn the turn signal
bulb holder (5) B
counterclockwise
until it stops and
remove it toward the
rear with the bulb.
5. If necessary, press the locking mechanism on the bulb holder

and pull the bulb straight out of the bulb holder.
6. Replace the burned out light bulb with a new bulb of the same type.
7. Reinsert the bulb Reinsert the bulb Reinsert the turn Reinsert the bulb (6)
holder (3) B into holder (4) B into signal bulb holder B into the headlight
the headlight and the headlight and (5) B into the and turn it clockwise
turn it clockwise clip it into the headlight and turn it until it stops.
until it stops. guide. clockwise until it
stop.
Insert the parking
light bulb holder (4)
B into the headlight
and clip it into the
guide.
Install the cover (1)

A on the back of
the headlight
8. (retainer vertical) Install the rubber cover (2) A.
and turn it
clockwise until it
stops.
The illustrations show the left headlight assembly from the rear. The right headlight assembly is
the mirror image of the left headlight assembly.
Different models may have different lights, and the location and design of covers, bulb holders,
and bulbs may be in a different location than shown in the illustrations.
You cannot replace the LEDs in LED daytime running lights. Contact your authorized
Replacing light bulbs in the HID-High Intensity Discharge (Xenon)
headlight
Fig. 201 In the engine compartment: cCover 1 on the left headlight for the turn signal bulb holder 2 and the
cornering light bulb holder 3.
The headlight does not need to removed in order to replace the bulb.
Contact your authorized Volkswagen dealer or an authorized Volkswagen Service Facility for
assistance with HID headlight replacement.
fig. 201 Turn signal Cornering light
1. Follow the checklist and perform the steps
2. Open the hood
3. Remove the rubber cover (1) A on the side of the headlight.
4. Turn the bulb holder (2) B Turn the bulb holder (3) B
counterclockwise until it stops and counterclockwise until it stops and
remove it toward the rear with the remove it toward the rear with the bulb.
bulb.
5. If necessary, press the locking mechanism on the bulb holder and pull the bulb
straight out of the bulb holder.
6. Replace burned out bulbs with new bulbs that are identical to the ones being
replaced.
7. Reinsert the bulb holder in the headlight and turn it clockwise until it stops.
8. Install the rubber cover (1) A.
The illustrations show the left headlight assembly from the rear. The right headlight assembly is
the mirror image of the left headlight assembly.
You cannot replace the LEDs in LED daytime running lights. Contact your authorized
Replacing light bulbs in the front bumper
Fig. 202 In right front bumper: Removing light assembly.
Fig. 203 Replacing light bulb in headlight.
Please carry out each step only in the order specified:
2. Remove the wire bracket from the vehicle tool kit and secure it in the opening in the cover
fig. 202. Pull the cover upward in the direction of the arrow.
3. Remove the screw (1) using the screwdriver in the vehicle tool kit
4. Remove the headlight.
5. Release the connector fig. 203 (1) and disconnect it.
6. Turn the bulb holder (2) counterclockwise in the direction of the arrow until it stops and
remove it toward the rear with the bulb.
8. Insert the bulb holder into the headlight assembly and turn it clockwise until it stops.
9. Connect the connector (1) on the bulb holder (2). You must hear the connector click into
place.
10. Insert the headlight.
11. Tighten the screw fig. 202 (1) with the screwdriver.
12. Install cover in the bumper .
Replacing light bulbs in the rear hatch
Fig. 204 In the rear hatch: Removing the cover and the bulb holder.
Fig. 205 Bulb holder with backup light bulb 2.
2. Open the rear hatch
3. Using the screwdriver from the vehicle tool kit carefully pry the cover off with the flat blade
of the screw driver inserted in the opening fig. 204 A (arrow).
Remove the red locking mechanism (2) B as illustrated and disconnect the electrical
4.
connector with the lever pressed down (1) B.
5. Press the locking tab (4) B in the direction of the arrow and remove the bulb holder (3) B.
6. Replace burned out rear light bulbs fig. 205 (1) or (2) with bulbs that are identical to the
ones being replaced.
7. Insert the bulb holder. You must hear the locking tab click into place.
Insert the electrical connector into the bulb holder until it clicks into place. Press the red
8.
locking mechanism fig. 204 (2) B back in.
9. Insert the cover. The cover must lock into place and be secure.
LEDs in the rear lights

Changing LEDs is not possible without dismantling vehicle components. Contact an authorized
Taillights with LEDs may also have some standard light bulbs. These bulbs can be replaced.
Replacing light bulbs in the vehicle body
Fig. 206 In the side of the luggage compartment: Releasing the tail light, removing the trim panel and
removing the screws.
Fig. 207 Removed tail light: Removing the bulb holder and replacing the tail light and brake light bulb 3 or turn
signal bulb 4.
Removing the tail lights
2. Open the rear hatch
3. Insert the wire bracket from the vehicle tool kit into the small hole in the trim panel
fig. 206 (2) B. Remove the trim panel in the direction of the arrow using the wire bracket.
4. Open the side storage compartment in the luggage compartment
Using the Phillips screwdriver from the vehicle tool kit, turn the locking mechanism (1) A
5.
90 counterclockwise until it stops.
6. Remove the screws (3) C.
7. Pull the tail light out of the body carefully until the electrical connector is visible.
8. Remove the red locking mechanism fig. 207 (1) D as illustrated and disconnect the
electrical connector with the lever (2) D pressed down.
9. Lay the tail light on a clean and level surface.
Replacing light bulbs
10. Remove the screws (4) E.
11. Remove the bulb holder (3) E from the tail light.
12. Replace burned out tail light, brake light (5) F or turn signal bulbs (6) F with bulbs that are
identical to the ones being replaced.
13. Insert the bulb holder in the tail light and screw it in E.
Installing the tail lights
14. Turn the locking mechanism fig. 206 (1) A 90 clockwise until it stops.
15. Insert the electrical connector into the bulb holder until it clicks into place. Press the red
locking mechanism fig. 207 (1) D back in.
16. Insert the tail light into the opening on the body carefully.
Hold the tail light in the correct position with one hand and tighten the screws with the other
17.
hand (3) C.
18. Insert the trim panel fig. 206 (2) B into its original position, first at the bottom and then
at the top.
19. Close the side storage compartment in the luggage compartment.
20. Close the rear hatch
LEDs in the rear taillights

Changing LEDs is not possible without dismantling vehicle components. Contact an authorized
Taillights with LEDs may also have some standard light bulbs. These bulbs can be replaced.
Replacing license plate light bulbs
Fig. 208 In the rear hatch: Clamped license plate lamp.
Fig. 209 In the rear hatch: Screwed license plate lamp.
Clamped license plate lamp Screwed license plate lamp
2. Press the flat blade of the screwdriver from Remove the screws of the license plate lamp
the vehicle tool kit in the direction of the fig. 209 with the screwdriver from the
arrow in the notch in the license plate lamp vehicle tool kit.
fig. 208.
3. Pull out the license plate lamp slightly. The connector must not be separated for this.
Clamped license plate lamp Screwed license plate lamp
5. Carefully insert the license plate lamp into Carefully insert the license plate lamp into
the opening in the bumper. Ensure that the the opening in the bumper. Make sure that
license plate lamp is installed in the correct the adhesive anti-glare strip faces forward.
direction.
Press the license plate lamp into the bumper Tighten the securing screws of the license
6.
until it audibly latches. plate lamp with the screwdriver.
You cannot replace the LEDs. Contact your authorized Volkswagen dealer or an authorized
Volkswagen Service Facility for assistance.
Replacing the light bulb in the backup lamp

The light bulbs for the backup lights are Lifetime bulbs with a very long service life. If the bulb is
defective, you cannot change it yourself because other vehicle components must be removed.
Defective backup light bulbs should be changed by an authorized Volkswagen dealer or authorized
Volkswagen Service facility.
Jump-starting
Introduction
Using jumper cables
If your engine does not start because the vehicle battery is dead, your vehicle's battery can be
connected to the battery of another vehicle to start your engine (jump-starting). Check the battery acid
level indicator window before jump-starting 12 Volt vehicle battery.
You must use jumper cables that meet recognized industrial standards (check information provided by
the jumper cable manufacturer). For vehicles with gasoline engines, the cross-section of the jumper
cable wire must be at least 0.038 in2 (25 mm2), or about 3 ga. (AWG).
More information:
WARNING
Working on the batteries or the electrical system in your vehicle can cause serious acid
burns, fires, or electrical shock.
Always keep children away from battery acid and vehicle batteries in general.
Sulfuric battery acid is very corrosive and can cause blindness and damage to
unprotected skin. Never let battery acid or lead particles contact your eyes, skin, and
clothing.
Never lean over a vehicle battery. Always wear protective gloves and eye protection. To
reduce your risk of injury, never tilt the batteries; acid could spill out through the vents and
burn you.
A highly explosive mixture of gases is given off when the battery is being charged.
Always avoid fires, sparks, open flame, and smoking. Never create sparks or electrostatic
charges when handling cables and electrical equipment. Never short-circuit the battery
terminals. High-energy sparks can cause serious personal injury.
several minutes and get medical attention immediately. If you swallow any battery acid, get
medical attention immediately.
WARNING
Improper use of jumper cables when jump-starting a vehicle with a dead battery can cause
the battery to explode, leading to serious personal injury. To help reduce the risk of battery
explosion:
All work on the batteries or the electrical system in your vehicle can cause serious acid
burns, fires, or electrical shocks. Always read and heed the following WARNINGS and safety
precautions before working on the batteries or the electrical system 12 Volt vehicle
battery.
Always make sure that the battery providing starting assistance (the booster battery) has
the same voltage as the dead battery (12 V) and about the same amperage capacity (see
battery label).
Never jump-start a vehicle with a thawed or frozen vehicle battery. The battery can
explode. A dead battery can freeze at temperatures around +32 F (0 C).
A battery that is frozen or was frozen, but has since thawed, must be replaced.
When the vehicle battery is jump started, it gives off hydrogen gas, which is highly
explosive! Always keep fire, sparks, open flame, and smoking materials far away from vehicle
batteries. Never use a mobile telephone while connecting or disconnecting jumper cables.
Jump-start batteries only in well-ventilated areas. Batteries give off highly explosive
hydrogen gas during jump-starting.
Always route the jumper cables so that they cannot get caught in any moving parts in the
engine compartment.
Never short out the battery terminals by connecting the positive terminal (+) and negative
(-) terminals with each other.
Never connect the negative cable from the other vehicle directly to the negative terminal
of the dead battery, as this may cause the hydrogen gas given off by the dead battery to
explode.
Never attach the negative cable from the vehicle providing starting assistance to any part
of the fuel system or to the brake hoses or brake lines.
Never allow the non-insulated parts of the battery clamps to touch.
Never allow the jumper cable attached to the positive battery terminal to contact metal
Always follow the instructions of the jumper cable manufacturer.
NOTICE
To help prevent extensive damage to the vehicle electrical system, read and heed the
following:
Connecting jumper cables improperly can cause a short circuit and do expensive damage
to the vehicle's electrical system.
Do not let the vehicles touch each other while the jumper cables are connected. If they do,
electrical current may flow between the vehicles when the positive (+) terminals are connected,
causing electrical system damage.
Using jumper cables
Fig. 210 Diagram for attaching the jumper cables: Dead battery 1 and booster battery 2.
The dead battery must be properly connected to the vehicle's electrical system.
Make certain that the vehicles are not touching each other. Otherwise, electric current could flow as
soon as the positive terminals (+) are connected. Use longer jumper cables if necessary.
The clamps on the jumper cables must have good contact to bare metal on the battery terminals.
If the engine does not start, stop the process after 10 seconds and repeat after about one minute.
The procedure for attaching and for removing the jumper cables is described below. Perform each of
the following steps only in the order described, which follow the letters shown in the illustration
fig. 210 A B C D.
Attaching the jumper cables

1. Switch off the ignition in both vehicles.
2. If necessary, open the battery cover in the engine compartment 12 Volt vehicle battery.
3. Attach one end of the red jumper cable to the positive terminal (+) of the dead battery (1) .
4. Attach the other end of the red jumper cable to the positive terminal (+) of the good battery
(booster battery) (2).
5. Attach one end of the black jumper cable to the negative terminal () of the booster battery:
Battery (2) .
6. Attach the other end of the black jumper cable (3) to a bare metal part of the vehicle with the
dead battery. This part should be connected directly to the engine block. You may also attach the
cable to the engine block itself. Attach the clamp to a point that is as far away as possible from the
dead battery (1) .
7. Route the jumper cables so that they cannot get caught in any moving parts in the engine
compartment of either vehicle.
Starting the engine

Start the engine of the vehicle with the good battery that is providing help and let it run at idle
speed.
Turn the ignition of the vehicle with the dead battery. If the engine starts, wait 2 to 3 minutes until it
runs smoothly before removing the jumper cables as described below . If the engine does not
start within about 10 seconds, turn off the ignition and wait at least one minute; then try again.
Before removing the jumper cables

1. Switch off the headlights (if they are on).
2. In the vehicle with the dead battery, switch on the heater fan and the rear window defroster. This
helps to minimize voltage spikes when the cables are disconnected.
Removing jumper cables

With the engine running, remove the jumper cables in reverse order to the way they were connected.
1. Disconnect the black (-) cable from the vehicle with the dead battery.
2. Disconnect the black () cable from the other vehicle (vehicle with the good battery).
3. Disconnect the red (+) cable from the other vehicle (vehicle with the good battery).
4. Disconnect the red (+) cable from the vehicle with the dead battery.
5. Close the battery cover as the case may be.
WARNING
Improper use of jumper cables when jump-starting a vehicle with a dead battery can cause
the battery to explode, leading to serious personal injury. To help reduce the risk of battery
explosion:
All work on the batteries or the electrical system in your vehicle can cause serious acid
burns, fires, or electrical shocks. Always read and heed the following WARNINGS and safety
precautions before working on the batteries or the electrical system 12 Volt vehicle
battery.
Always wear proper eye protection. Never lean over the vehicle batteries.
Attach the jumper cables in the correct order: first the positive cable, then the negative
cable.
Never connect the negative cable from the vehicle providing starting assistance to parts
of the fuel system or to the brake hoses or brake lines.
Never allow the non-insulated parts of the battery clamps to touch.
Never allow the jumper cable attached to the positive battery terminal to contact metal
Check the battery acid level indicator window on the vehicle battery. Use a flashlight,
never a match, cigarette lighter, or other open flame. If you cannot see the color of the
window clearly, or if it is light yellow or colorless, do not jump-start the vehicle. Get expert
assistance.
Avoid electrostatic discharge in the vicinity of the vehicle battery. Sparks may cause the
hydrogen gas escaping from the vehicle battery to ignite.
Never jump-start a vehicle with a battery that is damaged or frozen or that was frozen and
has thawed. The battery can explode. Replace the battery instead.
Always follow the instructions of the jumper cable manufacturer.
Always make sure that the battery providing starting assistance has the same voltage as
the dead battery (12 V) and about the same capacity (see battery label).
Batteries give off explosive hydrogen gas. Always keep fire, sparks, open flame and
smoking materials away from batteries.
Never connect the negative cable from the other vehicle directly to the negative terminal
of the dead battery. The hydrogen gas from the battery is explosive.
Never short out the battery terminals by connecting the positive (+) and negative ()
terminals with each other.
Towing
Introduction
Towing on a commercial tow truck
Tips on towing
Installing the front towing eye
Installing the rear towing eye
Driving tips while towing
Observe legal requirements when towing.

Your vehicle is equipped with a trailer package.
For technical reasons:

A vehicle with a dead battery must never be towed; Jump-start the vehicle instead.
It is not possible to tow-start or push-start your vehicle; Jump-start the vehicle instead.
Vehicles with Keyless Access may only be towed with the ignition on.
Towing the vehicle when the engine is turned off and the ignition is turned on drains the vehicle
battery. Depending on the charge level of the vehicle battery, it is possible that even after just a few
minutes, electrical devices such as the emergency flashers may not have the power necessary to
function. The steering wheel might lock in vehicles with Keyless Access .
More information:
Exterior views
Shifting
Jump-starting
WARNING
Never tow a vehicle without any electrical power.
Never remove the remote control vehicle key from the ignition switch while the vehicle is
moving. The electronic steering column lock could suddenly engage, and you would not be
able to steer or control the vehicle. You can lose control of the vehicle, crash, and seriously
injure yourself and others.
If the vehicle loses power while it is being towed, stop towing the vehicle immediately and
contact your authorized Volkswagen dealer or authorized Volkswagen Service Facility for
assistance.
WARNING
Towing a vehicle changes the way it handles and brakes. To help reduce the risk of an
accident and serious personal injury, note the following:
The driver of the vehicle that is being towed:
Since the brake booster also does not work when the engine is stopped, you will need
to press harder on the brake pedal to slow down or stop. Always be alert so as not to rear-
end towing vehicle.
Will have to use considerable more force to turn the steering wheel because the power
steering is not working.
The driver of the vehicle that is doing the towing:
Must accelerate gradually and gently and avoid jerking movements.
Must not brake hard or steer sharply.
Must brake earlier and more gently than in normal driving.
NOTICE
Be careful not to damage the paint when installing and removing the towing eye and the
cover for the threaded hole behind the bumper.
Unburned fuel can get into the catalytic converter during towing and damage it.
NOTICE
The vehicle may be damaged if it is towed with a tow rope or a tow bar.
Never let the vehicle be towed with a tow rope or a tow bar unless it is absolutely
necessary.
If the vehicle breaks down, it can only be towed by a special tow truck.
Towing on a commercial tow truck

To help avoid damaging the vehicle, have it towed only by a professional towing company. Read and
heed the following information:
General information
Never let the vehicle be towed at speeds above 30 mph (50 km/h).
Never let the vehicle be towed for more than 30 miles (50 km).
Towing manual transmission vehicles

Release the parking brake.
If possible, have the vehicle towed with the front wheels off the ground.
If necessary, the vehicle can also be towed with the rear wheels off the ground .
Towing automatic transmission vehicles

Release the parking brake.
Tow the vehicle only with its front wheels off the ground .
Special towing instructions for vehicles with all-wheel drive (4MOTION)

To help prevent unnecessary damage, vehicles with all-wheel drive (4MOTION) must be
transported on a flat-bed truck.
To load the vehicle on the flat bed, use the towing eye found in the vehicle tool kit and attach it to
the front anchorage
When not to tow your vehicle

If there is little or no oil in the transmission because of damage to your vehicle, it must be moved with
the drive wheels off the ground. The vehicle can only be towed if its ignition is switched on and its
electrical system is operating. In the following situations, the vehicle cannot be towed at all and must
be transported on a flatbed truck or trailer:
If the front and rear wheels cannot turn.
If the vehicle battery is dead (because the steering is locked and the electronic parking brake and
the electronic steering column lock cannot be released if engaged).
If you have to tow an automatic transmission vehicle more than 30 miles (50 km).
WARNING
It is not safe for children or other persons to ride in a vehicle that is being towed.
Never let children or anyone else remain in the vehicle while it is being towed.
NOTICE
The drive axle rotates while the vehicle is being towed with its rear wheels off the ground. This
can damage the automatic transmission.
Never tow automatic transmission vehicle with the rear wheels off the ground.
Tow manual transmission vehicles with the rear wheels off the ground only if it is certain
that no transmission fluid can leak out.
Tips on towing
Towing eye; tow rope or tow bar

A towing eye is included in your vehicle's tool kit. This can be inserted in a threaded hole in the front
bumper and used when your vehicle is being towed by another vehicle. On most vehicles, there is
another threaded hole in the rear bumper, so you can use the towing eye to tow other vehicles as well.
Towing a vehicle with a tow bar is safer and easier on both vehicles than using a tow rope. A tow rope
should be used only if a tow bar is not available.
The tow rope should be flexible enough to help protect both vehicles from damage. Use a synthetic
fiber rope or similar rope.
Attach the tow rope or tow bar only to the towing eye included in the vehicle tool kit for this purpose, or
to a trailer hitch.
Towing manual transmission vehicles

Check whether your vehicle can be towed at all; see below When not to tow your vehicle.
If yes, note the following for the towed vehicle:
Shift the gearshift lever to Neutral 223.
Do not tow faster than 30 mph (50 km/h).
Do not tow more than 30 miles (50 km).
Towing automatic transmission vehicles

Check whether your vehicle can be towed at all; see below When not to tow your vehicle.
If yes, note the following for the towed vehicle:
Put the transmission in Neutral (N).
Do not tow faster than 30 mph (50 km/h).
Do not tow more than 30 miles (50 km).
When a commercial tow truck is being used, the vehicle must only be towed with the front wheels
lifted off the ground.
Follow the special instructions for towing vehicles with all-wheel drive (4MOTION).
Towing vehicles with all-wheel drive (4MOTION)

Vehicles with all-wheel drive (4MOTION) should be towed with a tow bar or a tow rope. If the vehicle is
towed with the front or rear axles lifted off the ground, the engine must be switched off. Otherwise the
powertrain may be damaged.
When not to tow your vehicle

In the following situations, the vehicle cannot be towed and must be transported on a flatbed truck or
trailer:
If transmission fluid has leaked out of the transmission.
If there is little or no oil in the transmission because of damage to your vehicle, it must be moved
with the drive wheels off the ground.
If the front and rear wheels cannot turn.
When the vehicle battery is dead, since the steering may remain disabled, and it may not be
possible to release the electronic steering column lock and the electronic parking brake.
If you have to tow an automatic transmission vehicle more than 30 miles (50 km).
Towing other vehicles

Obey all legal requirements.
Read and heed all towing information in the owners manual for the other vehicle.
A vehicle can be towed only if the electronic parking brake and the electronic steering column
lock can be released. In case of a power loss or malfunctions of the electrical system, the engine may
have to be jump-started in order to release the electronic parking brake and the electronic steering
column lock.
Installing the front towing eye
Fig. 211 In right front bumper: Screwing in towing eye.
The attachment point for the towing eye is located on the right in the front bumper.
Always keep the towing eye in the vehicle and stow it securely.
Read and follow the notes about towing Tips on towing.
Installing the towing eye

Take the towing eye, the lug wrench, and the screwdriver out of the vehicle tool kit in the luggage
compartment Vehicle tool kit.
Insert the flat blade of the screwdriver into the slot between the cover and the bumper.
Carefully pry out the cover. A slightly stronger force might be required. Leave the cover hanging.
Screw the towing eye counterclockwise into the threaded hole as far as it will go (arrow)
fig. 211 . Use the lug wrench to turn and tighten the towing eye.
When towing is complete, unscrew the towing eye clockwise to remove it and replace the cover.
Clean the towing eye and lug wrench if necessary and put them back in the vehicle tool kit in the
NOTICE
Always make sure the towing eye is screwed all the way into threaded hole so that it is secure.
Otherwise, it could be ripped out while your vehicle is being towed.
Installing the rear towing eye
Fig. 212 On the right in the rear bumper: Cover.
Your vehicle is factory-equipped with a preparation for a trailer hitch. Therefore, there is no attachment
point for a towing eye behind the cover on the right of the rear bumper fig. 212. To tow a vehicle, a
trailer hitch must be installed.
Driving tips while towing

Towing requires some experience, especially when using a towing rope. Both drivers must be familiar
with the techniques required for towing. Inexperienced drivers should not try to tow a vehicle or to
drive a vehicle that is being towed.
Do not pull too hard with the towing vehicle, and avoid jerking the tow rope. When towing on an
unpaved road, there is always a risk of overloading and damaging the attachment points.
If your vehicle is being towed, it can still signal turns even if the emergency flashers are activated, as
long as the ignition is switched on. Use the turn signal in the normal way. The emergency flashers go
off as long as the turn signal is flashing. As soon as the turn signal lever returns to its neutral position,
the emergency flashers are automatically activated again.
As driver of the towed vehicle:

If your vehicle is the one being towed, the ignition switch must be switched on to keep the steering
wheel from locking. Also make sure that the turn signals, horn, windshield wipers, and windshield
washers work properly.
Since power steering does not work when the engine is switched off, more effort is needed to steer
the vehicle.
Since the brake booster also does not work when the engine is stopped, you will need to press
harder on the brake pedal to slow down or stop. Do not hit the towing vehicle.
Read and heed the information and WARNINGS in the towing vehicle's owner's manual.
As driver of the towing vehicle

Drive especially carefully and accelerate gently. Avoid sudden driving maneuvers.
Brake earlier than usual and with light pedal pressure.
Read and heed the information and WARNINGS in the owner's manual of the vehicle being towed.
Abbreviations
Abbreviation Meaning
5S manual 5-speed manual transmission
6S automatic 6-speed automatic transmission
6S manual 6-speed manual transmission
ABS Anti-lock Brake System
AFS Adaptive Front Lighting System
AKI Anti-Knock Index
ANSI American National Standards Institute
ASL Automatic Shift Lock
ASR Anti-Slip Regulation
ATA Anti-Theft Alarm system
BAS Brake Assist System
ccm Cubic centimeter unit of volume for specifying engine displacement
CCS Cruise Control System
CID Cubic inch displacement, unit of volume for specifying engine displacement
cm Centimeter metric unit of measure for length
CO2 Carbon dioxide
DIN Deutsches Institut fr Normung (German Institute for Standardization)
DRL Daytime running lights
EDL Electronic Differential Lock
EDR Event Data Recorder
EN European Norm
EPC Engine control (Electronic Power Control)
ESC Electronic Stability Control
g/mi (g/km) Generated carbon monoxide amount in grams per mile (kilometer) driven
GAWR Gross Axle Weight Rating
GVWR Gross Vehicle Weight Rating
HID High Intensity Discharge headlights (HID)
hp Horsepower, unit used to rate engine power
kg Kilogram metric unit for weight
kN Kilonewton, a measure of force
kp Kilopond, a measure of force
kW Kilowatt, engine rating
LED Light Emitting Diode
m Meter metric unit of measure for length
MFI Multi-Function Indicator
MIL Malfunction Indicator Light (engine)
MTBE Methyl Tertiary Butyl Ether
Nm Newton meter, engine torque unit
RON Research Octane Number, measurement of antiknock resistance of gasoline
rpm Engine revolutions per minute (engine speed)
SAE Society of Automotive Engineers
TSI Twin-charged Stratified Injection

2014 Volkswagen Tiguan 88297

Uploaded by

Copyright:

Available Formats

2014 Volkswagen Tiguan 88297

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2014 Volkswagen Tiguan 88297

Uploaded by

Copyright:

Available Formats

Side view

Fig. 1 Vehicle side overview.

Fig. 2 Vehicle front overview.

Fig. 3 Vehicle rear overview.

Fig. 4 Overview of controls in the driver door.

Fig. 5 Driver side overview.

Upper center console

Fig. 6 Overview of upper center console.

Fig. 10 Overview of the front passenger side.

Key to fig. 10:

Interior and reading lights

Three-button module booklet Mobile phone package

Fig. 11 Instrument cluster in the instrument panel.

Warning and information texts

Type of Symbol Explanation

Priority 1 Red Symbol flashing or lit sometimes with acoustic warnings.

Information Information about various vehicle situations.

Outside temperature display

Selector lever positions

Gear recommendation (manual transmission)

Fig. 15 Compass zones.

Adjusting the compass zone

Calibrating the compass

Service reminder display

Viewing service message

Resetting the oil change service reminder

Vehicles with Premium display:

Switch off the ignition.

Press and hold the . / button in the instrument cluster.

Switch on the ignition.

Release the . / button.

A confirmation message appears in the display. Confirm request with the

Vehicles with Basic display:

Switch off the ignition.

Press and hold the . / button in the instrument cluster.

Switch on the ignition.

Release the . / button and push the button in the instrument

Resetting the inspection service reminder

Switch off the ignition.

Switch on the emergency flashers.

Press and hold the . / button in the instrument cluster.

Switch on the ignition.

Release the . / button.

A confirmation message appears in the display. Confirm request with the

Switch off the emergency flashers.

Vehicles with Basic display:

Switch off the ignition.

Switch on the emergency flashers.

Press and hold the . / button in the instrument cluster.

Switch on the ignition.

Release the . / button.

Release the . / button and push the button in the instrument

Switch off the emergency flashers.

Menu structure overview: Basic version

Menu structure overview: Premium version

Multi-Function Indicator (MFI) MFI menu (Multi-Function Indicator): Premium version

The available displays are as follows:

Using the instrument cluster menus: Premium version

Accessing the instrument cluster menus

Returning to the higher menu level