Scribd
Upload
1K views1 page

Casting Tolerance

This document provides information on casting tolerance grades for different casting processes and dimensions. It assigns tolerance grades CT5-CT16 for various sand molding, permanent metal molding, and lost wax casting processes. It also includes a table specifying the total casting tolerance in millimeters for different tolerance grades and raw casting dimensions ranging from -10mm to over 10,000mm. Tolerances get looser with higher tolerance grades and larger dimensions.

Uploaded by

Trushant Nakum
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Casting Tolerance

This document provides information on casting tolerance grades for different casting processes and dimensions. It assigns tolerance grades CT5-CT16 for various sand molding, permanent metal molding, and lost wax casting processes. It also includes a table specifying the total casting tolerance in millimeters for different tolerance grades and raw casting dimensions ranging from -10mm to over 10,000mm. Tolerances get looser with higher tolerance grades and larger dimensions.

Uploaded by

Trushant Nakum
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ISO 8062:1994; SFSA2000; BS6615:1996

Casting Tolerance Grades of Casting Processes

Conditions, Casting Processes Select Tolerance Grades

all sand molding process fully capable including hand molding,


CT 12-14
most appropriate for large castings

appropriate for most casting types and sand molding processes CT 10-12

Sand castings made by automatic moulding, molding machine


CT 8-10
and shell molding process.

permanent metal moulding process and low pressure casting. CT 7-9

lost wax investment casting process include water glass and


CT 5-7
silicon. Silicon is better than water glass.

Rough Casting Tolerances


Raw casting
Total casting tolerance
basic dimension
mm
mm
up to Casting tolerance grade CT
over and
including 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

- 10 0.09 0.13 0.18 0.26 0.36 0.52 0.74 1 1.5 2 2.8 4.2 - - - -
10 16 0.1 0.14 0.2 0.28 0.38 0.54 0.78 1.1 1.6 2.2 3 4.4 - - - -
16 25 0.11 0.15 0.22 0.3 0.42 0.58 0.82 1.2 1.7 2.4 3.2 4.6 6 8 10 12
25 40 0.12 0.17 0.24 0.32 0.46 0.64 0.9 1.3 1.8 2.6 3.6 5 7 9 11 14
40 63 0.13 0.18 0.26 0.36 0.5 0.7 1 1.4 2 2.8 4 5.6 8 10 12 16
63 100 0.14 0.2 0.28 0.4 0.56 0.78 1.1 1.6 2.2 3.2 4.4 6 9 11 14 18
100 160 0.15 0.22 0.3 0.44 0.62 0.88 1.2 1.8 2.5 3.6 5 7 10 12 16 20
160 250 - 0.24 0.34 0.5 0.7 1 1.4 2 2.8 4 5.6 8 11 14 18 22
250 400 - - 0.4 0.56 0.78 1.1 1.6 2.2 3.2 4.4 6.2 9 12 16 20 25
400 630 - - - 0.64 0.9 1.2 1.8 2.6 3.6 5 7 10 14 18 22 28
630 1 000 - - - - 1 1.4 2 2.8 4 6 8 11 16 20 25 32
1 000 1 600 - - - - - 1.6 2.2 3.2 4.6 7 9 13 18 23 29 37
1 600 2 500 - - - - - - 2.6 3.8 5.4 8 10 15 21 26 33 42
2 500 4 000 - - - - - - - 4.4 6.2 9 12 17 24 30 38 49
4 000 6 300 - - - - - - - - 7 10 14 20 28 35 44 56
6 300 10 000 - - - - - - - - - 11 16 23 32 40 50 64
For sizes up to 16 mm, general tolerances form CT 13 to CT16 are not available. For these sizes individual tolerances shall be
indicated.
Grade 16 exists only for wall thicknesses of castings generally specified to CT15.

You might also like