Scribd
Upload
402 views15 pages

Production Engineering II - 01

This document outlines a course on Production Engineering II given at STT MIGAS in 2017. It includes sections on opening remarks, pre-test questions, an outline of topics to be covered like Production Engineering and Artificial Lift, and post-test questions. The pre-test and post-test questions assess the students' knowledge of key concepts in production engineering including reservoir conditions, well schematics, drive mechanisms, fluid properties, and inflow performance relationships. The course aims to teach students about energy and the origin of oil and gas, as well as production methods and artificial lift techniques.

Uploaded by

Qisrah Putra Hasbi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
402 views15 pages

Production Engineering II - 01

This document outlines a course on Production Engineering II given at STT MIGAS in 2017. It includes sections on opening remarks, pre-test questions, an outline of topics to be covered like Production Engineering and Artificial Lift, and post-test questions. The pre-test and post-test questions assess the students' knowledge of key concepts in production engineering including reservoir conditions, well schematics, drive mechanisms, fluid properties, and inflow performance relationships. The course aims to teach students about energy and the origin of oil and gas, as well as production methods and artificial lift techniques.

Uploaded by

Qisrah Putra Hasbi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

Production

Engineering II
Keiza Cindy Callista
Randie C Tombuku
Ray Hutahaean

Production Engineering II _ STT MIGAS 2017 _ KRR


Opening
Requirement
Rule and Role
Objective
Reference

Production Engineering II _ STT MIGAS 2017 _ KRR


Production Engineering II _ STT MIGAS 2017 _ KRR
PRE TEST

Production Engineering II _ STT MIGAS 2017 _ KRR


Pre Test
Mention the petroleum system!
What is Production Engineering?
Draw a well schematic and shows where are :
Reservoir pressure
Bottom hole pressure
Well flowing pressure
What is IPR?
Explain about IPR and VLP relation
Explain about drive mechanisms
Describe type of hydrocarbon fluid and the composition?
Draw a diagram phase
Shows reservoir until separator condition on the diagram phase?
Shows the bubble point and dew point
Shows where is 100% liquid, 100% gas and mixture
Shows and explain tricondenbar, tricondenterm and critical point

Production Engineering II _ STT MIGAS 2017 _ KRR


Outline
Production Engineering
Artificial Lift

Production Engineering II _ STT MIGAS 2017 _ KRR


PRODUCTION ENGINEERING

Production Engineering II _ STT MIGAS 2017 _ KRR


Energy and Oil and Gas

Production Engineering II _ STT MIGAS 2017 _ KRR


Origin of Oil and Gas

Production Engineering II _ STT MIGAS 2017 _ KRR


Production Evolution

Production Engineering II _ STT MIGAS 2017 _ KRR


ARTIFICIAL LIFT
Production Engineering II _ STT MIGAS 2017 _ KRR
Artificial Lift
Artificial Lift
Primary Secondary Tertiary
Why? Recovery Recovery Recovery

How?

Production Engineering II _ STT MIGAS 2017 _ KRR


Production Engineering II _ STT MIGAS 2017 _ KRR
POST TEST

Production Engineering II _ STT MIGAS 2017 _ KRR


PostTest
Draw a diagram phase
Shows reservoir until separator condition on the diagram phase?
Shows the bubble point and dew point
Shows where is 100% liquid, 100% gas and mixture
Shows and explain tricondenbar, tricondenterm and critical point
Describe type of hydrocarbon fluid and the composition?
Explain about drive mechanisms
What is IPR?
Explain about IPR and VLP relation
Draw a well schematic and shows where are :
Reservoir pressure
Bottom hole pressure
Well flowing pressure
What is Production Engineering?

Production Engineering II _ STT MIGAS 2017 _ KRR

You might also like