1510A

Precision Signal/Function Generator

DUAL CHANNEL
OUTPUT
RUGGED

BACKLIT
LCD SCREEN
BUILT-IN USB
CONTROL PORT
SPILL-PROOF
KEYPAD

PROVIDER OF RECHARGEABLE
MEASUREMENT BATTERY
SOLUTIONS FOR MORE (up to 6 hrs. of continuous use
per charge)
THAN 50 YEARS
COMPACT SIZE

Remarkable Functionality Applications

Signals - Voltage, Charge and Machinery Speed Signals Cabling and wiring troubleshooting
Waveforms - SINE, SQUARE, TRIANGLE and PULSE from Audio signal simulation
0.1Hz to 100kHz in 0.1 Hz increments Vibration signal simulation - accelerometers and
Automatic Thermal Compensation - ensuring velocity probes
accuracy in different environments from laboratory, control Machinery speed signal simulation
room to factory environments Low-voltage bridge sensor signal simulation
Jog Function - slowly vary the signal frequency to Calibration of:
determine filter response or vary the signal amplitude in Monitoring systems
increments to determine system gain Charge amplifiers
Low Voltage Bridge Simulation - easily command Avionics equipment
microvolts with its 24-bit closed loop control to simulate
strain gauges
High Accuracy - Voltage and charge signals with
accuracies to 0.05%

A worldwide leader in precision measurement solutions

Technical Specifications
Channel B Channel B
Waveform: Sine Wave Channel A Standard Signal Types
(for speed synthesizers signals, refer Speed Synthesizers Signals
to table on the right)
Voltage Range Ratio Speed Signal Function
(0.1 Hz to 100 kHz) 0 to 9.9999 Volts pk Signal Type Sine, Square, Single pulse, Odd Pulse
Voltage Accuracy (of setting, 10mV to 10V) Signal Range 0 to 9.9999 Volts Pk
(10Hz to 20Hz) 0.15%0.1mV Resolution 0.1 mV
(20Hz to 30kHz) 0.05%0.1mV Frequency Range (ratio) 0.1 to 100X Chan A frequency, Step 0.1
(30kHz to 50kHz) 0.07%0.1mV Units RMS, peak, or pk-pk
(50kHz to 80kHz) 0.08%0.1mV
(80kHz to 100kHz) 0.10%0.1mV Single Pulse Signal Function
Charge Range Signal Type 1-cycle sine or cycle square (TTL)
(10 Hz to 100 kHz) 1 to 9,999.9 pC pk Signal Range 0 to 9.9999 Volts Pk
Charge Accuracy (of setting) Resolution 0.1 mV
(10pC to10,000pC, 10Hz to 30kHz) 0.20%0.1pC Pulse Duty Cycle 3% to 100%
Resolution 0.1mV Frequency Range (ratio) 0.1x to 100x Ch. A frequency, Step 0.1
Level Types RMS, peak or pk-pk units Frequency Range (fixed) 1Hz to 100kHz
Frequency Range 0.1 Hz - 99,999.9 Hz Units RMS, peak, or pk-pk
Chan. B frequency can also be set and locked to any ratio of Chan.A.
Refer to Speed synthesizer specifications. Odd Pulse Signal Function
Distortion Odd Pulse Type Long or Short
(10 Hz to 50 kHz) <0.5% <0.75% Odd Pulse Size 0 to 999% of Base Pulse
(50 kHz to 100 kHz) <3.0% Number of Base Pulses
Frequency Accuracy (of setting) between Odd Pulse 1 - 100
(3 Hz to 100 kHz) 0.005% Frequency Range (ratio) 0.1x to 100x Ch. A frequency, Step 0.1
Variable phase (all waveform types) 0 to 360 Frequency Range (fixed) 1 Hz to 99,999.9 Hz
Chan A phase on any waveform type can be synchronized and locked to Chan B phase, Range 0 to 9.9999 Volts Pk
at any phase setting 0-360, Step 1. Resolution 0.1 mV
In Sweep mode, Chan A & Chan B can be swept together, preserving phase relationship. Voltage Units RMS, peak, or pk-pk
Waveform Sine wave
Waveform: Square Wave
Voltage Range 0 to 9.9999 Volts pk Sweep Function (Channels A & B)
Charge Range 0 to 9,999.9 pC pk Sweep time 1 to 999 sec (16.67 min)
Resolution (voltage & charge) 0.1mV or 0.1 pC Sweep time Step 1 Second
Level Types RMS, peak or pk-pk units User Controls Set START Frequency
Frequency Range 0.1 Hz - 20 kHz Set STOP Frequency
Frequency Accuracy (of setting) Set SWEEP time (seconds)
(3 Hz to 100 kHz) 0.005% GO
Rise/Fall Time PAUSE
(10% to 90%) =3.0 sec. CANCEL
Asymmetry Less than 3% at 10 kHz Channels A alone or A & B together
Overshoot Less than 2% Chan B can be swept synchronously with Chan A, if Chan B frequency is
Voltage Accuracy (of setting) 0.1% typical, 0.25% max set to any Ratio of Chan A frequency.
Phase between Chan A and Chan B is preserved during sweep.
Waveform: Triangle Wave
Waveform: Saw-Tooth Wave Controls and Features
Voltage Range 0 to 9.9999 Volts pk User Display Graphical, 128x64 pixel
Charge Range 0 to 9,999.9 pC pk B&W transflective
Resolution (voltage & charge) 0.1mV or 0.1 pC LCD white backlight
Level Types RMS, peak or pk-pk units Computer Port USB-A Connector
Frequency Range 0.1 Hz to 20 kHz USB 1.0 for remote control
Frequency Accuracy (of setting) programming and calibration
(3 Hz to 100 kHz) 0.005% Battery Charger Port For battery charging and operation
Voltage Accuracy (of setting) 0.1% typical, 0.25% max 115/230VAC power
Key Pad Functions
Output Connectors Numbers 0 through 9
Impedance 50 ohms Function Keys (soft keys) 4 - functions change depending
Connector BNC coaxial upon operating mode
Differential Charge (DE) MS3102A-10SL-3P On/Off Momentary Hold soft button
Single-ended Charge (SE) 50 Ohm 10-32 MicroDot coaxial Set-Up Memory 40 locations to save settings
for all outputs and functions
DC Output (and DC offset) Memories (non-volatile) Save program setups - any combination
Voltage Range 9.9999 VDC of instrument settings
Voltage Accuracy (of setting) 0.05%0.1mV Dimensions 7.5"H x 4.25W x 2.25"D
Resolution 0.1 mV 19cm x 11cm x 5.7cm
DC voltage can be generated alone or simultaneously with AC signal to simulate offsets Power External charger operates from
115/230VAC, 50-60Hz
Microvolt DC Output Bridge Mode Approx 5 watts.
Voltage Range 1 volt to 99.999 mVDC
Battery Pack NiMH, 2500mAH
Voltage Accuracy (of setting) 0.05% 5 volt
Size AA (Qty 4)
Resolution 0.1 volt
Bridge mode operates under 24-bit closed-loop control to ensure accuracy for testing of strain gage
and other low-level bridge circuits.

MTI Instruments, Inc.

325 Washington Avenue Extension
Albany, NY 12205-5505
PH: +1-518-218-2550
OR USA TOLL FREE: 1-800-342-2203
FAX: +1- 518-218-2506 A subsidiary of Mechanical Technology, Inc.(MKTY)
EMAIL: [email protected]
www.mtiinstruments.com