Scribd
Upload
296 views1 page

Amiantit Catalog

The document provides technical data for PE100 polyethylene pipes including standard dimension ratios (SDR), nominal pressures, minimum wall thicknesses, wall thickness tolerances, and linear weights for pipe diameters ranging from 16mm to 200mm. It specifies this information across pressure levels from PN4 to PN25 in a table format.

Uploaded by

mahdi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
296 views1 page

Amiantit Catalog

The document provides technical data for PE100 polyethylene pipes including standard dimension ratios (SDR), nominal pressures, minimum wall thicknesses, wall thickness tolerances, and linear weights for pipe diameters ranging from 16mm to 200mm. It specifies this information across pressure levels from PN4 to PN25 in a table format.

Uploaded by

mahdi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

6 Product Technical Data

Product technical data PE100


Standard dimension ratio (SDR)

7.4 9 11 13.6 17 21 26 33 41

Nominal pressure (PN) bar


Outside
diameter Ovality[1]
PE 100 PN 25 PN 20 PN 16 PN 12.5 PN 10 PN 8 PN 6 PN 5 PN 4 OD{2}
Pipe OD Minimum W.T W.T tolerance Linear weight Minimum W.T W.T tolerance Linear weight Minimum W.T W.T tolerance Linear weight Minimum W.T W.T tolerance Linear weight Minimum W.T W.T tolerance [3] Linear weight[4] Minimum W.T W.T tolerance Linear weight Minimum W.T W.T tolerance Linear weight Minimum W.T W.T tolerance Linear weight Minimum W.T W.T tolerance Linear weight[4]
(mm) (mm) (mm) (kg/m) (mm) (mm) (kg/m) (mm) (mm) (kg/m) (mm) (mm) (kg/m) (mm) (mm) (kg/m) (mm) (mm) (kg/m) (mm) (mm) (kg/m) (mm) (mm) (kg/m) (mm) [3](mm) (kg/m)

16 0.3 2.3 0.4 0.10 2.0 0.3 0.09 - - - - - - - - - - - - - - - - - - - 16.3 1.2

20 0.3 3.0 0.4 0.16 2.3 0.4 0.13 2.3 0.3 0.12 - - - - - - - - - - - - - - - - - 20.3 1.2

25 0.3 3.5 0.5 0.24 3.0 0.4 0.21 2.3 0.4 0.17 2.0 0.3 0.15 - - - - - - - - - - - - - - - 25.3 1.2
32 0.3 4.4 0.6 0.39 3.6 0.5 0.33 3.0 0.4 0.28 2.4 0.4 0.23 2.0 0.3 0.19 - - - - - - - - - - - - 32.3 1.3
40 0.4 5.5 0.7 0.60 4.5 0.6 0.51 3.7 0.5 0.43 3.0 0.5 0.36 2.4 0.4 0.29 2.0 0.3 0.25 - - - - - - - - 40.4 1.4
50 0.4 6.9 0.8 0.94 5.6 0.7 0.79 4.6 0.6 0.67 3.7 0.5 0.55 3.0 0.4 0.45 2.4 0.4 0.37 2.0 0.3 0.31 - - - - - - 50.4 1.4
63 0.4 8.6 1.0 1.48 7.1 0.9 1.26 5.8 0.7 1.05 4.7 0.6 0.87 3.8 0.5 0.72 3.0 0.4 0.58 2.5 0.4 0.49 - - - - - - 63.4 1.5
75 0.5 10.3 1.2 2.10 8.4 1.0 1.77 6.8 0.8 1.47 5.6 0.7 1.24 4.5 0.6 1.01 3.6 0.5 0.82 2.9 0.4 0.67 - - - - - - 75.5 1.6
7

90 0.6 12.3 1.4 3.02 10.1 1.2 2.56 8.2 1.0 2.13 6.7 0.8 1.77 5.4 0.7 1.46 4.3 0.6 1.18 3.5 0.5 0.97 - - - - - - 90.6 1.8

110 0.7 15.1 1.7 4.52 12.3 1.4 3.80
10.2 1.1 3.16 8.1 1.0 2.63 6.6 0.8 2.17 5.3 0.7 1.78 4.2 0.6 1.43 - - - - -
110.7 2.2

125 0.8 17.1 1.9 5.81 14.0 1.6 4.91
11.4 1.3 4.16 9.2 1.1 3.38 7.4 0.9 2.77 6.0 0.7 2.27 4.8 0.6 1.84 - - - - - -
125.8 2.5

14 0 0.9 19.2 2.1 7.30 15.7 1.7 6.15
12.7 1.4 5.11
10.3 1.2 4.24 8.3 1.0 3.48 6.7 0.8 2.84 5.4 0.7 2.32 - - - - - -
140.9 2.8

160 1.0 21.9 2.3 9.51 17.9 1.9 8.01
14.6 1.6 6.70
11.8 1.3 5.53 9.5 1.1 4.54 7.7 0.9 3.73 6.2 0.8 3.05 - - - - - 161.0 3.2

180 1.1 24.6 2.6 12.02 20.1 2.2 10.14
16.4 1.8 8.47
13.3 1.5 7.02 10.7 1.2 5.74 8.6 1.0 4.68 6.9 0.8 3.79 - - - - - -
181.1 3.6

200 1.2 27.4 2.9 14.87 22.4 2.4 12.53
18.2 2.0 10.45
14.7 1.6 8.61 11.9 1.3 7.08 9.6 1.1 5.80 7.7 0.9 4.71 - - - - - -
201.2 4.0

225 1.4 30.8 3.2 18.79 25.2 2.7 15.87
20.5 2.2 13.23
16.6 1.8 10.93 13.4 1.5 8.98 10.8 1.2 7.33 8.6 1.0 5.91 - - - - - -
226.4 4.5

250 1.5 34.2 3.6 23.20 27.9 2.9 19.5
22.7 2.4 16.27
18.4 2.0 13.47 14.8 1.6 11.01 11.9 1.3 8.97 9.6 1.1 7.33 - - - - - -
251.5 5.0

280 1.7 38.3 4.0 29.09 31.3 3.3 24.51
25.4 2.7 20.40
20.6 2.2 16.87 16.6 1.8 13.83 13.4 1.5 11.32 10.7 1.2 9.14 - - - - - -
281.7 9.8

315 1.9 43.1 4.5 36.82 35.2 3.7 31.01 28.6 3.0 25.82 23.2 2.5 21.39 18.7 2.0 17.51 15.0 1.6 14.23 12.1 1.4 11.64 9.7 1.1 9.40 7.7 0.9 7.53 316.9 11.1
355 2.2 48.5 5.0 46.69 39.7 4.1 39.38 32.2 3.4 32.77 26.1 2.8 27.12 21.1 2.3 22.29 16.9 1.8 18.07 13.6 1.5 14.72 10.9 1.2 11.89 8.7 1.0 9.58 357.2 12.5
400 2.4 54.7 5.6 59.30 44.7 4.6 49.95 36.3 3.8 41.61 29.4 3.1 34.38 23.7 2.5 28.17 19.1 2.1 23.04 15.3 1.7 18.66 12.3 1.4 15.14 9.8 1.1 12.14 402.4 14.0
450 2.7 - - - 50.3 5.2 63.25 40.9 4.2 52.69 33.1 3.5 43.55 26.7 2.8 35.69 21.5 2.3 29.14 17.2 1.9 23.59 13.8 1.5 19.07 11.0 1.2 15.31 452.7 15.6
500 3.0 - - - 55.8 5.7 77.94 45.4 4.7 65.01 36.8 3.8 53.74 29.7 3.1 44.09 23.9 2.5 35.95 19.1 2.1 29.10 15.3 1.7 23.52 12.3 1.4 19.06 503.0 17.5
560 3.4 - - - - - - 50.8 5.2 81.45 41.2 4.3 67.43 33.2 3.5 55.24 26.7 2.8 44.99 21.4 2.3 36.48 17.2 1.9 29.60 13.7 1.5 23.73 563.4 19.6
630 3.8 - - - - - - 57.2 5.9 103.19 46.3 4.8 85.22 37.4 3.9 69.96 30.0 3.1 56.83 24.1 2.6 46.22 19.3 2.1 37.34 15.4 1.7 30.02 633.8 22.1
[1] Ovality tolerances calculated as per ISO 11922-1 Grade N

[2] OD tolerances calculated as per ISO 11922-1 grade B (0.006 DN, rounded up to the next greater 0.1 mm with minimum value of 0.3 mm and max 4.0 mm.

[3] Thickness tolerances calculated as per ISO 11922-1 grade V (0.1WTmin +0.1) mm rounded up to the next 0.1 mm.

11
10
09
08
07
06
05
04
03
02
01

[4] The weight calculated with average density of 0.955 g/cm.

You might also like