Scribd
Upload
32 views2 pages

Share Your Raspberry Pi

This document provides instructions for sharing files and folders on a Raspberry Pi across a local network using Samba. It describes installing the Samba and Samba-common-bin packages, editing the smb.conf configuration file to set the workgroup name and enable WINS support, and adding a section to share the Pi's home folder. It also explains running smbpasswd to set a password for user pi to allow login from Windows PCs and accessing the shared folders.

Uploaded by

Cirlugea Dorin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
32 views2 pages

Share Your Raspberry Pi

This document provides instructions for sharing files and folders on a Raspberry Pi across a local network using Samba. It describes installing the Samba and Samba-common-bin packages, editing the smb.conf configuration file to set the workgroup name and enable WINS support, and adding a section to share the Pi's home folder. It also explains running smbpasswd to set a password for user pi to allow login from Windows PCs and accessing the shared folders.

Uploaded by

Cirlugea Dorin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Share your Raspberry Pi's files

and folders across a network


You can share your Raspberry Pi's files and folders across a network using
a piece of software called Samba, a Linux implementation of the Server
Message Block protocol. You'll need to install this software:
$ sudo apt-get install samba samba-common-bin

Samba contains the SMB protocol, support for the Windows naming service
(WINS), and support for joining Windows workgroups. A workgroup is a
group of computers on a local network that can access eachother's folders.
Samba-common-bin contains a tool that you'll need to register users with
Samba. Once these packages have finished installing, you need to edit the
Samba configuration file:
$ sudo leafpad /etc/samba/smb.conf &

Find the entries for workgroup and wins support, and set them up as
follows:
workgroup = your_workgroup_name
wins support = yes

The name of the workgroup can be anything you want, as long as it only
contains alphabetical characters, and it matches the name of the workgroup
that you want to join.

You also need to add the following section of code to smb.conf:

[pihome]
comment= Pi Home
path=/home/pi
browseable=Yes
writeable=Yes
only guest=no
create mask=0777
directory mask=0777
public=no

Scroll down smb.conf until you see a section called Share Definitions, and
add this code there. The path should point to the drive or folder that you
want to share. I've set 'only guest' and 'public' to 'no' so that Samba
prompts for a password when I visit the folder that I've shared. This means
that when I'm using a Windows PC, I can login to the shared folders on my
Pi, and I'll have the same read/write permissions that user pi has.
Now type this command in a terminal, and enter pi's password twice:
$ smbpasswd -a pi

If you have a PC or laptop connected to your workgroup, you should be


able to see your Raspberry Pi in Windows Explorer under Network.

[PiServer]
comment = Pi Server Folder
path = /
browseable = yes
writeable = yes
only guest = no
create mask = 0777
directory mask = 0777
public = no
read only = no
force user = root

You might also like