Scribd
Upload
38 views1 page

System Engineering 1 - Grup Assign 3

This document discusses a nuclear power plant system engineering assignment. It describes the key characteristics of a nuclear power plant system: using nuclear fuel, providing cheaper base load power through daily operation, and controlling reactor power with boric acid or control rods. It then categorizes the performance objectives and subjective attributes of the reactor coolant system, such as its design thermal power, pressure, temperatures, flow rates, and vulnerabilities. Finally, it outlines the system's main characteristics: transferring energy from the reactor core to steam generators, accommodating transients, controlling reactor power rapidly with control rods or slowly with boric acid, and acting as a secondary barrier to the environment.

Uploaded by

Satrio Pradana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
38 views1 page

System Engineering 1 - Grup Assign 3

This document discusses a nuclear power plant system engineering assignment. It describes the key characteristics of a nuclear power plant system: using nuclear fuel, providing cheaper base load power through daily operation, and controlling reactor power with boric acid or control rods. It then categorizes the performance objectives and subjective attributes of the reactor coolant system, such as its design thermal power, pressure, temperatures, flow rates, and vulnerabilities. Finally, it outlines the system's main characteristics: transferring energy from the reactor core to steam generators, accommodating transients, controlling reactor power rapidly with control rods or slowly with boric acid, and acting as a secondary barrier to the environment.

Uploaded by

Satrio Pradana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

GROUP ASSIGNEMENT 3 SYSTEM ENGINEERING

1. What makes a NPP system, product, or service unique


a. Use nuclear as a fuel
b. Cheaper than other power plant
c. Daily load power
d. Base power unit
e. Controlling Materials (Boric Acid; Control Rods)

2. Categorize RCS system, product, or service performance


A. Objective
Design Thermal Power (incl. heat addition) : 4000 MWt
Design Pressure : 2500 psia
Pressurizer Design Temperature : 700F
Coolant Flow Rate : 166.6 106 lb/hr
Col leg temperature : 555F
Hot leg temp : 615F
Average Temp : 585F
System Water Volume : 16,150 ft3
B. Subjective
Vulnerability of corrosion
High radioactive
Very hot water inside Reactor Vessel
Closed loop

3. Characteristic
a. Transfer energy from reactor core to SG
b. Be able to accommodate the 2nd transient
c. Have a rapid reaction using control rods and slow reaction if using Boron Acid to
control Power Reactor
d. Secondary barrier to release fission product from reactor to environment

You might also like