The document provides specifications for the U-Block MTP-L 04 data logger. It can automatically collect remote sensor data via cellular networks and store it in its internal memory. It supports analog and digital inputs/outputs, various communication protocols, and sending data to a server on a timed interval or triggered by events. Its components include an LCD display, memory, analog/digital ports, and cellular and Ethernet communication modules.
The document provides specifications for the U-Block MTP-L 04 data logger. It can automatically collect remote sensor data via cellular networks and store it in its internal memory. It supports analog and digital inputs/outputs, various communication protocols, and sending data to a server on a timed interval or triggered by events. Its components include an LCD display, memory, analog/digital ports, and cellular and Ethernet communication modules.
The document provides specifications for the U-Block MTP-L 04 data logger. It can automatically collect remote sensor data via cellular networks and store it in its internal memory. It supports analog and digital inputs/outputs, various communication protocols, and sending data to a server on a timed interval or triggered by events. Its components include an LCD display, memory, analog/digital ports, and cellular and Ethernet communication modules.
The document provides specifications for the U-Block MTP-L 04 data logger. It can automatically collect remote sensor data via cellular networks and store it in its internal memory. It supports analog and digital inputs/outputs, various communication protocols, and sending data to a server on a timed interval or triggered by events. Its components include an LCD display, memory, analog/digital ports, and cellular and Ethernet communication modules.
U-Block MTP- L 04 is data logger with designed to automate Display
o LCD Display (Option) collection of remote data from environmental monitoring, o 3 x LED Display (Support 6 LED Status Display) industrial measurements, and telemetry system via GSM/GPRS o 3 Button input interface cellular networks from any location within the cellular o Support Configure via RS232 network coverage area. Memory o Minimum 4 MB support up to 16 MB U-Block MTP- L 04 has watchdog timer to reset itself and auto 3 Analog Inputs reconnect on transmission failure capitalized on the carrier o 2 port for Voltage signal input 0-5V/0-10V/0-30V supported dynamic routing e.g. RIP V2, OSPF, BGP multicast to ( 12 bits resolution) o 1 port for Voltage signal input 0-5V/0-10V/0-30V establish the best data route. The GRE Tunnel Keepalive (20 bits resolution) feature provides the capability of configuring keepalive o Over voltage protection. packets to be sent on regular interval. GPRS class 12 or Edge 2 Digital Inputs class 10, self report, interrogation, event and timed modes o 2 channel Edge/Level trigger. (for pulse counting) o Maximum Input voltage levels more than 35VDC. supported. o Surge protection 2 Digital Outputs U-BLOCK MTP-L 04 is data logger with Digital LCD display o Output voltage range 5-50VDC(Depend on power supply to be (Option) and operating button combined with communication connected) o Include Output Clamp Diode for driving inductive load. module offer the possibility of continual, real-time sending data 2 x Serial communication port that collect on many sensors for remote monitoring and control o 2 port RS-232 (9600 bps) Interface supporting Modbus -> (Data of measurement unit can set as 6 digit or more.) Modbus/TCP o 1 port RS-485 (Option) o 1 port SDI-12 (Option) Install the U-BLOCK MTP-L 04 within cellular network o Ethernet Interface (10/100 auto-sensing) RJ-45 (Option) coverage area enable data communication. Data on U-BLOCK Switching Hub support for 4 ports (Option) MTP-L04 will be sending out to server automatically. User can Power requirement o Power supply 9- 30 VDC set condition of connection (Time Interval or Event Trigger Communication modes supported). If connection broken or fail all data will be o Support 3G-GSM or LAN or Wireless Lan o Spec For 3G-GSM stored in U-BLOCK MTP-L04 internal memory and when SIM5215 (A/E/J)/ SIM5216 (A/E) connection have recover, sending data will start Dual-Band UMTS/HSDPA 850(800)/900/2100MHz automatically so the data on server always will be kept update. Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz Tri-Band GSM/GPRS/EDGE 850/900/1800MHz Network Functions: GPRS multi-slot class 12 EDGE multi-slot Class 12 - Multi-Protocol Support: ICMP, ARP, RIP, RARP, DHCP, etc. WCDMA 3GPP release 5/99 - Support Dynamic DNS (Domain Name System) Output power - UMTS 1900/850: 0.25W - Support Network Address Translation (NAT) - UMTS 2100/900: 0.25W and Port Address Translation (PAT) - GSM850/GSM900: 2W - DCS1800: 1W - VPN(Optional) : Support standard IPsec - PCS1900: 1W - Support Routing Protocols Operation temperature: -30 to +80 HSDPA - Max.3.6Mbps(DL) : RIP, IGRP, OSPF, EGP, BGP WCDMA - Max.384Kbps(DL), Max.384Kbps(UL) EDGE Class - Max. 236.8Kbps(DL),Max.118Kbps(UL) Standard Approvals: GPRS - Max. 85.6Kbps(DL), Max.42.8Kbps(UL) EMC CSD - GSM data rate 14.4Kbps EN 301 489-1 WCDMA data rate 57.6Kbps Support Digital Camera and VEDIO Call(Optional) EN 301 489-7 EN 301 489-24