This document outlines the design criteria for a commercial electrical system with the following specifications:
- The system voltage will be 400/230V, three phase, 60Hz with a 400A main circuit breaker and feeder cables consisting of 4-250mm2 and 1-50mm2 THHN wires. Conduit types will be IMC for main and branch circuits.
- Lighting layout and load calculations must be shown to achieve 400 lux illumination. A maximum of 10 duplex outlets are allowed per branch circuit.
- Air conditioning units include 7 split-type units at 6.21kW and 6 split-type units at 3.81kW.
- The electrical design submission must include paper documents
This document outlines the design criteria for a commercial electrical system with the following specifications:
- The system voltage will be 400/230V, three phase, 60Hz with a 400A main circuit breaker and feeder cables consisting of 4-250mm2 and 1-50mm2 THHN wires. Conduit types will be IMC for main and branch circuits.
- Lighting layout and load calculations must be shown to achieve 400 lux illumination. A maximum of 10 duplex outlets are allowed per branch circuit.
- Air conditioning units include 7 split-type units at 6.21kW and 6 split-type units at 3.81kW.
- The electrical design submission must include paper documents
This document outlines the design criteria for a commercial electrical system with the following specifications:
- The system voltage will be 400/230V, three phase, 60Hz with a 400A main circuit breaker and feeder cables consisting of 4-250mm2 and 1-50mm2 THHN wires. Conduit types will be IMC for main and branch circuits.
- Lighting layout and load calculations must be shown to achieve 400 lux illumination. A maximum of 10 duplex outlets are allowed per branch circuit.
- Air conditioning units include 7 split-type units at 6.21kW and 6 split-type units at 3.81kW.
- The electrical design submission must include paper documents
This document outlines the design criteria for a commercial electrical system with the following specifications:
- The system voltage will be 400/230V, three phase, 60Hz with a 400A main circuit breaker and feeder cables consisting of 4-250mm2 and 1-50mm2 THHN wires. Conduit types will be IMC for main and branch circuits.
- Lighting layout and load calculations must be shown to achieve 400 lux illumination. A maximum of 10 duplex outlets are allowed per branch circuit.
- Air conditioning units include 7 split-type units at 6.21kW and 6 split-type units at 3.81kW.
- The electrical design submission must include paper documents
A. Design Parameters System Voltage: 400/230V, Three Phase, 60hz Main Circuit Breaker Protection: 400AT 3-Phase MCCB Feeder Cable: 4-250sq.mm 1-50sq.mm THHN (5-Wire) Line 1, Line 2, Line 3, Neutral and Ground Wire
B. Desing Specifications Conductor Type: THHN Main Conduit: IMC Branch Conduit: IMC Protection : Bolt-Type Inverse Type Circuit Breaker
C. Lighting layout and computation at 230V 1Phase System
1.0 Derive the lighting layout based on 400 lux illumination level 2.0 Show the illumination computation on how you arrived on the number of fixtures.
D. Convenience outlet (maximum of 10 duplex CO per branch circuit).
1.0 Maximum of 10 duplex CO per branch circuit.
E. Air Conditioning Unit
1.0 Use 7-Unit 5-Toner Split-Type ACU (6.21kW 400V, 3Ph each) 2.0 Use 6-Unit 3-Toner Split-Type ACU (3.81kW 230V, 1Ph each)
F. Equipment conductors and protection computation.
G. Design Contents: Paper Size Page 1.0 1 0 Cover page Bond paper A4 page 1 2.0 Table of contents Bond paper A4 page 2 3.0 Design Criteria Bond paper A4 page 3 4.0 Illumination calculation per room Bond paper A4 page 4 5.0 Attachment: Bond paper A4 page 5 Approved floor plan layout A4 Conductor Ampacity Table A4 Conduit Table A4 Other table used in the calculation A4 6.0 Electrical Plan layout White Paper A3 a. Draw the layout in Autocad b. Scale 1:100 (metric) c. Provide title block indicating your name as designer. d. Minimum font size is 250mm/arial e. Font size for header name is 400mm/arial f Contents of the electrical plan f. 1. Lighting layout with homerun circuit and assigned switching. 2. Power layout with homerun circuit and outlets for each appliance load 3. Riser diagram and panelboard diagram 4. Legend 5. Load schedule 6. General notes Pen Assignment H Design H. D i to t be b submitted b itt d in i a softbound. ftb d color l lineweigth li i th Color : Beige printed Floor layout 252 0.1 1.0 Printed with Commercial Design Font white 0.2 2.0 Your name. Lighting green 0.2 Outlet green 0.2 I. Date of Submission Wiring red 0.2 October 7, 2017 Others red 0.2
