Scribd
Upload
2K views1 page

HX710 PDF

The HX710(A/B) is a 24-bit analog-to-digital converter (ADC) with built-in features for temperature sensing or voltage difference detection. It is designed for weigh scales and industrial control applications to interface directly with a bridge sensor. It has a fixed gain of 128, corresponding to a full-scale differential input voltage of ±20mV. The device includes an on-chip oscillator and power-on-reset circuitry requiring no external components. It can operate at data rates of 10SPS or 40SPS and rejects 50Hz and 60Hz supply noise.

Uploaded by

Jagadish Paul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

HX710 PDF

The HX710(A/B) is a 24-bit analog-to-digital converter (ADC) with built-in features for temperature sensing or voltage difference detection. It is designed for weigh scales and industrial control applications to interface directly with a bridge sensor. It has a fixed gain of 128, corresponding to a full-scale differential input voltage of ±20mV. The device includes an on-chip oscillator and power-on-reset circuitry requiring no external components. It can operate at data rates of 10SPS or 40SPS and rejects 50Hz and 60Hz supply noise.

Uploaded by

Jagadish Paul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HX710(A/B)

24-Bit ADC with Built-in Temperature Sensor (HX710A)


24-Bit ADC with (DVDD-AVDD) Voltage Difference Detection (HX710B)

DESCRIPTION FEATURES
Based on Avia Semiconductors patented On-chip temperature measurement (HX701A)
technology, HX710(A/B) is a precision 24-bit DVDD and AVDD supply voltage difference
analog-to-digital converter (ADC) with built-in measurement (HX701B)
temperature sensor (HX710A) or DVDD, AVDD On-chip low noise amplifier with a gain of 128
voltage difference detection (HX710B). Its On-chip oscillator requiring no external
designed for weigh scales and industrial control component
applications to interface directly with a bridge On-chip power-on-reset
sensor.
Simple digital control and serial interface:
The input low-noise amplifier (PGA) has a pin-driven controls, no programming needed
fixed gain of 128, corresponding to a full-scale Selectable 10SPS or 40SPS output data rate
differential input voltage of 20mV, when a 5V
Simultaneous 50 and 60Hz supply rejection
reference voltage is connected to the VREF pin.
Current consumption:
On chip oscillator provides the system clock
without any external component. On-chip power- normal operation < 1.2mA, power down < 1uA
on-reset circuitry simplifies digital interface Operation supply voltage range: 2.6 ~ 5.5V
initialization. There is no programming needed Operation temperature range: -40 ~ +85
for the internal registers. All controls to the 8 pin SOP-8 package
HX710 are through the pins.

LED LCD
L1
Charger Regulator

1u 1u 0.1u
Battery

VDD
0.1u

VREF AVDD
AGND DVDD
Load-cell INN DOUT I/O
200 INP PD_SCK I/O
0.1u HX710
MCU

200

Fig. 1 Typical weigh scale application block diagram

TEL: (592) 252-9530 (P. R. China) AVIA SEMICONDUCTOR


EMAIL: [email protected]

You might also like