KTM RICHARDS FIGURE R721/R723 FLOATING BALL VALVES

DN 15 - 200 ASME CLASS 150 AND 300

A one and two piece fire safe and anti-static full bore, flanged ball valve for the chemical petroleum industries.
R721 - ASME Class 150
R723 - ASME Class 300

FEATURES

Designed to ASME B16.34, API 608

and ISO17292. Optional testing to
API 6D / ISO 14313
Two piece bolted body design complies with
ASME B16.34 and ASME VIII.
ISO 5211 top mounting flange.
Face to face to ASME B16.10
Fire safe tested and certified to API 607
byLloyds Register Asia.
Flange connection to ASME B 16.5
asstandard.
Carbon steel or stainless steel body
All valves are factory hydro/air tested to
API598
Blow-out proof shouldered stem.
Anti-static to API 608.
A secondary metal fire safe seat.
Cantilevered block seat as standard.
Optional spring energized constrained
seatdesign for sizes DN 40 - 200 supplied
asstandard.
EC Certificate of Conformity for
PED 97/23/EC, Schedule 4, Module H.
Double block and bleed capability for sizes
GENERAL APPLICATIONS TECHNICAL DATA DN 50 - 200.
Optional cavity pressure bleed/vent fitting
Ideally suited for use in the oil and gas Size range: DN 15 - 40 forsizes DN 50 - 200.
production, refining and chemical applications. One piece body design External replaceable weather seal.
Body material and wetted trim components DN 50 - 200 Emergency sealant facility
conform to NACE Standard MR0175-2002. Two piece body design (optional: DN 50 - 200).
Hazardous areas handling flammable fuels, Pressure rating: ASME Class 150 to 300 Spring energized stem assembly to
gases or chemicals where `fire safe or Temperature rating: Up to 260C compensate for wear and temperature
anti-static valves are mandatory or desirable. End connections: Flanged ASME B16.5 changes.
Optional fugitive emission stem seal package.
Vented ball equalizes body cavity pressure
in open position and prevents possible
seatdamage.
Manufactured under quality system ISO9001
Cert. No. MEL0929678/A and API 6D Q1
Cert. No. 6D-0243.
Certificate of compliance to
EN 10204/ISO 10474 Type 3.1 (DIN 50 049) are
Certified AGA service to AS4617 and AS4629.

www.valves.emerson.com 2017 Emerson. All rights reserved. VCTDS-00775-EN 15/09

KTM RICHARDS FIGURE R721/R723 FLOATING BALL VALVES
DN 15 - 200 ASME CLASS 150 AND 300

NOTE: DN 25 R721 valve illustrated.

300

200
200
301
301
300
207 258
207 258
206
213
213
204
206
217
204
003 202
217
001
003 201
202
002 101
201
026 101
100/532
001
002

026

100

NOTE: DN 80 R723 valve illustrated with

301
wrench sectioned for clarity.

300

303
207
206
205
004
235
532 223
011 251
010 202
009 201
200
101
100
012
001

100

101 001

SEAT DETAILS

100 100

001 001
101 101
102
104
137 106

Cantilever seat Energized seat

100
001
101
2
102
104
137 106
KTM RICHARDS FIGURE R721/R723 FLOATING BALL VALVES
DN 15 - 200 ASME CLASS 150 AND 300

PARTS LIST
No. Description Carbon steel Stainless steel
001 Body ASTM A216-WCC ASTM A351-CF8M
002 Body insert (DN 15 - 40) ASTM A216-WCC ASTM A351-CF8M
003 Body insert seal (DN 15 - 40) Virgin PTFE Virgin PTFE
004 Stop pin (DN 15 - 50) (not shown) UNS S31600 UNS S31600
Stop pin (DN 80 - 200) Alloy steel UNS S31600
009 Body connector (DN 50 - 200) ASTM A216-WCC ASTM A351-CF8M
010 Body stud (DN 50 - 200) ASTM A193 Gr B7 ASTM A193 Gr B8M
011 Body nut (DN 50 - 200) ASTM A194 Gr 2H ASTM A194 Gr 8M
012 Body gasket (DN 50 - 200) Flexible graphite Flexible graphite
023 Stop pin spacer (DN 15 - 50) UNS S31600 UNS S31600
026 Firesafe body seal (DN15 - 40) Flexible graphite Flexible graphite
100 Ball UNS S31600 UNS S31600
101 Seat (Code T - Cantilevered) Virgin PTFE Virgin PTFE
Seat (Code C - Cantilevered) Carbon reinforced PTFE Carbon reinforced PTFE
Seat (Code 2 - Energized) Carbon reinforced PTFE Carbon reinforced PTFE
102 Seat follower (Energized seat) UNS S31600 UNS S31600
104 Seat spring (Energized seat) Inconel Inconel
106 Seat housing seal (Energized seat) FKM FKM
137 Fire safe housing seal (Energized seat) Flexible graphite Flexible graphite
200 Stem (Standard) UNS S31803 UNS S31803
Stem (High strength) (Optional - UNS S17400) (Optional - UNS S17400)
201 Primary stem seal Carbon reinforced PTFE Carbon reinforced PTFE
202 Firesafe stem seal Flexible graphite Flexible graphite
204 Stem seal upper (DN 15 - 25) Carbon reinforced PTFE Carbon reinforced PTFE
205 Stop plate UNS S31600 UNS S31600
206 Stem spring Inconel Inconel
207 Stem nut UNS S31600 UNS S31600
213 Gland (DN 15 - 25) UNS S31600 UNS S31600
217 Gland packing (DN 15 - 25) Flexible graphite Flexible graphite
223 Stem seal follower (DN 40 - 200) UNS S31600 UNS S31600
235 Aux. stem seal FKM FKM
251 Weather seal (DN 40 - 200) Comp. carbon fiber Comp. carbon fiber
258 Lock washer UNS S31600 UNS S31600
300 Wrench (DN 15 - 50) UNS 30400 UNS 30400
(Optional UNS S31600) (Optional UNS S31600)
Wrench (DN 80 - 200) Carbon steel painted Carbon steel zinc plated
(Optional UNS S31600) (Optional UNS S31600)
301 Wrench retainer Carbon steel zinc plated Carbon steel zinc plated
(Optional UNS S31600) (Optional UNS S31600)
303 Wrench head S.G. Iron (prime coated) S.G. Iron (prime coated)
(Optional UNS S31600) (Optional UNS S31600)
532 Anti-static device UNS S31600/Inconel UNS S31600/Inconel

NOTE:
Pressure containing materials conform to NACE MR0175 - 2002.

3
 F
G

KTM RICHARDS FIGURE R721/R723 FLOATING BALL VALVES K

DN 15 - 200 ASME CLASS 150 AND 300

H H

F DN25
H
G C

B A
FG F
G
F
K

E K
K D
K

DN25
C
C C A
B
B A
B A B A

E E D
E D
D
D

NOTE: DN 25 R721 valve illustrated. NOTE: DN 80 R723 valve illustrated

DIMENSIONS (mm)
Valve B C D E F K Stem conn. Top plate data Mass (kg) Kv
size A Class Class Class No. Hole Class at full
DN bore 150 300 150 300 150 300 HxG Keyway Holes Dia. PCD 150 300 open
15 13 90 95 22.5 108 140 56.0 56.0 145 95 9.5 x 6.3 N/A 4 M6 50 2.0 2.0 7.9
20 19 100 117 30.0 117 152 63.0 63.0 180 106 14.3 x 9.5 N/A 4 M6 50 2.5 2.5 26.2
25 25 110 124 34.5 127 165 65.0 65.0 180 111 14.3 x 9.5 N/A 4 M6 50 3.5 3.5 45.3
40 38 125 156 47.5 165 190 87.6 87.6 200 127 19 x 12.7 N/A 4 M8 70 6.5 10.0 132.0
50 51 150 165 66.0 178 216 75.0 93.0 277 130 19 x 12.7 N/A 4 M8 70 12.0 14.5 344.0
65 63 180 N/A 85.0 190 N/A 89.1 N/A 427 160 22 x 15.9 N/A 4 M10 102 18.0 N/A 533.0
80 76 190 210 97.0 203 283 95.0 116.0 427 170 22 x 15.9 N/A 4 M10 102 23.0 35.5 852.0
100 102 230 254 124.0 229 305 99.0 135.0 625 220 32 10 x 10 4 M12 125 42.0 63.0 1688.0
150 150 317 332 159.0 394 403 181.0 186.0 966 255 32 10 x 10 4 M12 125 89.0 119.0 5110.0
200 200 408 N/A 199.0 457 N/A 229.0 N/A N/A N/A 35 10 x 8 4 M12 125 168.0 N/A 9950.0

NOTES:
B = The diameter of the center body flange (two piece) or the diameter of the end flange (one piece).
F = The handle dimension when the handle is in the extended position.
H = The diameter of the stem connection.
G = The dimension across the stem flats.
Kv = The flow rate of water in m3/hr that will pass through a valve with a pressure drop of 1 bar (100 kPa) at 20C.
Cv = 1.155 Kv
Dimensions are nominal to 1 mm.
N/A = Not available

4
KTM RICHARDS FIGURE R721/R723 FLOATING BALL VALVES
DN 15 - 200 ASME CLASS 150 AND 300

PRESSURE/TEMPERATURE GRAPH PRESSURE/TEMPERATURE RATINGS

Class 150 (Figure R721) PTFE seated.

Temperature (F) Carbon steel:
1980 kPa/19.8 bar max at 38C
-40 60 160 260 360 460 560 Stainless steel:
1900 kPa/19 bar max at 38C
5000 300# WCC
700 Carbon reinforced PTFE
C Carbon steel:
600 1980 kPa/19.8 bar max at 38C
4000
Stainless steel:
2 500 1900 kPa/19 bar max at 38C
Pressure (kPa)

300# CF8M

Pressure (psi)
3000
400 Class 300 (Figure R723) PTFE seated.
150# WCC T Carbon steel:
5170 kPa/51.7 bar max at 38C
2000 300
Stainless steel:
150# CF8M 4960 kPa/49.6 bar max at 38C
200
1000 Carbon reinforced PTFE
100 Carbon steel:
5170 kPa/51.7 bar max at 38C
0 0 Stainless steel:
-40 0 40 80 120 160 200 240 280 4960 kPa/49.6 bar max at 38C

Temperature (C)
NOTE:
1. These pressure/temperature ratings displayed are
for total valve assembly with the respective seat
T - Virgin PTFE Cantilevered Seat material fitted.
C - R PTFE Cantilevered seat 2. Seat pressure/temperate limitations displayed
2 - R PTFE Energized seat for Class 150 and 300 are in combination with
FKMO-ring seals. For other seat/sealing
NOTE: * Available in sizes DN 40 - 200. materials refer to Emerson.
3. Carbon steel valves have a minimum temperature
limitation of minus 29C.

5
KTM RICHARDS FIGURE R721/R723 FLOATING BALL VALVES
DN 15 - 200 ASME CLASS 150 AND 300

TYPICAL SPECIFYING SEQUENCE - CLASS 150 AND CLASS 300

150 R721 C A A T S F 3 - 01
Valve size Figure no. Body End conn. End conn. Seat type Trim Body seal Certification Valve Standard
material (note 1) (note 1) material code (note 2) variant option

Size range: DN 15 - 40 (one piece full bore design)

Figure no: R721 - Fire safe, anti-static, Class 150, full bore, floating ball design ball valve, wrench operated with locking device.
R723 - Fire safe, anti-static, Class 300, full bore, floating ball design ball valve, wrench operated with locking device.

Trim code Body material End conn. End conn. Seat Trim Body seal
CAATST Carbon steel Flg ASME Flg ASME PTFE 316 S/S PTFE
SAATST 316 S/S Flg ASME Flg ASME PTFE 316 S/S PTFE
CAA2ST Carbon steel Flg ASME Flg ASME Carbon RPTFE 316 S/S PTFE
SAA2ST 316 S/S Flg ASME Flg ASME Carbon RPTFE 316 S/S PTFE

Size range: DN 50 - 200 (two piece full bore design)

Figure no.: R721 - Fire safe, anti-static, Class 150, full bore, floating ball design ball valve, wrench operated with locking device.
R723 - Fire safe, anti-static, Class 300, full bore, floating ball design ball valve, wrench operated with locking device.

Trim code Body material End conn. End conn. Seat Trim Body seal
CAATSF Carbon steel Flg ASME Flg ASME PTFE 316 S/S Flexible graphite
SAATSF 316 S/S Flg ASME Flg ASME PTFE 316 S/S Flexible graphite
CAA2SF Carbon steel Flg ASME Flg ASME Carbon RPTFE 316 S/S Flexible graphite
SAA2SF 316 S/S Flg ASME Flg ASME Carbon RPTFE 316 S/S Flexible graphite

NOTE:
1. For end connection details refer to Emerson.
2. Certification code: Standard certification code 3 includes pressure test certification and material certification of the pressure containing components conforming to
EN 10204:1991/ISO 10474 Type 3.1 (DIN 50 049). Additional certification requirements is available on request, refer to Emerson.
3. Valve variant: Standard valve is not offered with variants. Should a valve variant be required, refer to Emerson for variant listing and order code details.
4. Standard options: Base valve is supplied with wrench operator with locking device - code 01. For other valve options, refer to Emerson for listing and order code details.
For bare shaft valves (code 08) where fitment of gearbox or actuator is required, the order requirement is to be specified as Complete with followed by the details of
the requirement - eg: complete with gearbox.

2017 Emerson. All rights reserved. 6