0% found this document useful (0 votes)
70 views3 pages

RunnTech W200 Series Single Axis Fingertip Joystick

RunnTech W200 Single Axis Fingertip Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as remote control chest packs and the control of construction, agricultural, material handling equipment or lifting equipment, etc.

Uploaded by

RunnTech
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
70 views3 pages

RunnTech W200 Series Single Axis Fingertip Joystick

RunnTech W200 Single Axis Fingertip Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as remote control chest packs and the control of construction, agricultural, material handling equipment or lifting equipment, etc.

Uploaded by

RunnTech
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

RunnTech Electronics (Changzhou) Corp.

W200 Fingertip Joystick

W200 Single Axis Fingertip Joystick


Product Features

Single axis

Potentiometer sensor or Hall sensors

Single axis or two axis Control

High-intensity lever and excellent proportional control or switch output

Easy to install, flexible operation, uniform texture, maintenance-free

Application

RunnTech W200 Single Axis Fingertip Joystick is mainly used in hydraulic proportional control and variable frequency
motor control, such as remote control chest packs and the control of construction, agricultural, material handling
equipment or lifting equipment, etc.

Technical Information

Environment Parameter
Storage Temperature -50+80

Operating Temperature -40+80

Protection Grade IP64

Vibration Amplitude3g, Frequency: 10Hz-200Hz


Impact 20g, 6ms, Semi-sinusoidal
EMC Anti-interference Rank 100V/m, 30MHz to 1GHz, 80% sine-wave modulation, meet EN50082-2 (1995) standard
EMC Emission Rank Rank B, 150KHz to 30MHz, meet EN50081-2 (1993) standard
ESD Anti-interference Rank Rank 4, 8KV contact discharge, 15KV air discharge, meet IEC61000-4-2 standard
Mechanical Parameter
Mechanical Angle Potentiometer: 32, Hall: 20
Operating Torque 5N (50N max)

Mechanical Life 5 million


Mechanical Error 0.5
Electrical Parameter
Power Supply Voltage 50.5V DC
Hall
Power Supply Current Consumption 6.5mA/hall sensor

tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | e-mail: [email protected] | website: www.runntech.com 1- 3
RunnTech Electronics (Changzhou) Corp. W200 Fingertip Joystick

Resolution Ratio infinite


Maximum Voltage 15VDC
Hall
Reversed Polarity Maximum Voltage 14.5VDC
Load Resistance 5K
Median Voltage (no-load) 48 - 52%Vs
Power Supply Voltage DC24V
Power Supply Current <20mA
Resolution Ratio infinite
Resistance (10%) 5K and 10K

Potentiometer Electrical Angle 32


Output Voltage Range (relative voltage) 0100%1090%
Median Voltage 48%52%
Potentiometer Maximum Load Voltage 32VDC
Maximum Power Consumption (25C) 0.25W
Switch Direction Switch Position 3

Product Configuration

No. Item Content


1 Serial Number W200 (Single-axis Fingertip Joystick)

2 Operation Mode T - Self-resetting

3 Operation Direction
1. Y axis
HV1: DC 5V, 0 2.5 5V
HV2: DC 5V, 0.5 2.5 -4.5V
Electrical Output Form
Hall HV3: DC 5V, 1.0 2.5 4.0V
4
HV4: DC 5V, 1.25 - 2.5 3.75V

Potentiometer P1: Ordinary two directions output

tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | e-mail: [email protected] | website: www.runntech.com 2- 3
RunnTech Electronics (Changzhou) Corp. W200 Fingertip Joystick

5 Potentiometer Type 1K, 2K, 5K, 10K, 20K or H - Hall type


6 Quantity of Switch Quantity of Switch Signal 01, 02 and 03.
7 Common Closed Position Refer to Table 4-3 Common Closed Position

W200 - T - 1 - P1 10K - 02 89

Serial Number
Operation Mode Switch Closed Position
Operation Direction Quantity of Switch
Electrical Output Form Potentiometer Type

Product Installation

30 30
25.30
72.5

46.00
7.50

Open hole size


G
A
B

?
3.
40
28.00
34.00

36
24

15.00
36
24
46.00

tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | e-mail: [email protected] | website: www.runntech.com 3- 3

You might also like