Msds Natrium Tetraboraks - LINE PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

He a lt h 2

0 0
Fire
2 0
Re a c t iv it y 0
P e rs o n a l E
P ro t e c t io n

Material Safety Data Sheet


Sodium borate MSDS

Section 1: Chemical Product and Company Identification

Product Name: Sodium borate Contact Information:


Catalog Codes: SLS2566, SLS3988, SLS3193 Sciencelab.com, Inc.
14025 Smith Rd.
CAS#: 1303-96-4 Houston, Texas 77396
RTECS: SC7310000 US Sales: 1-800-901-7247
International Sales: 1-281-441-4400
TSCA: TSCA 8(b) inventory: Sodium borate
Order Online: ScienceLab.com
CI#: Not available.
CHEMTREC (24HR Emergency Telephone), call:
Synonym: Sodium pyroborate 1-800-424-9300
Chemical Name: Sodium tetraborate decahydrate International CHEMTREC, call: 1-703-527-3887
Chemical Formula: Na2B4O7.10(H2O) For non-emergency assistance, call: 1-281-441-4400

Section 2: Composition and Information on Ingredients


Composition:

Name CAS # % by Weight


Sodium borate 1303-96-4 100

Toxicological Data on Ingredients: Sodium borate: ORAL (LD50): Acute: 2660 mg/kg [Rat.].

Section 3: Hazards Identification

Potential Acute Health Effects:


Hazardous in case of skin contact (irritant), of eye contact (irritant). Slightly hazardous in case of skin contact (permeator), of
ingestion, of inhalation.
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure is not known to aggravate medical condition.

Section 4: First Aid Measures

Eye Contact:
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids
open. Cold water may be used. Do not use an eye ointment. Seek medical attention.

p. 1
Skin Contact:
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running
water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used.
Cover the irritated skin with an emollient. If irritation persists, seek medical attention.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Serious Inhalation: Not available.
Ingestion:
Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform
mouth-to-mouth resuscitation. Seek immediate medical attention.
Serious Ingestion: Not available.

Section 5: Fire and Explosion Data

Flammability of the Product: Non-flammable.


Auto-Ignition Temperature: Not applicable.
Flash Points: Not applicable.
Flammable Limits: Not applicable.
Products of Combustion: Not available.
Fire Hazards in Presence of Various Substances: Not applicable.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in
presence of static discharge: Not available.
Fire Fighting Media and Instructions: Not applicable.
Special Remarks on Fire Hazards: Non combustible.
Special Remarks on Explosion Hazards: Not available.

Section 6: Accidental Release Measures

Small Spill:
Use appropriate tools to put the spilled solid in a convenient waste disposal container. If necessary: Neutralize the residue with
a dilute solution of acetic acid. Finish cleaning by spreading water on the contaminated surface and dispose of according to
local and regional authority requirements.
Large Spill:
Use a shovel to put the material into a convenient waste disposal container. Neutralize the residue with a dilute solution
of acetic acid. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary
system. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local
authorities.

Section 7: Handling and Storage

Precautions:
Do not ingest. Do not breathe dust. Wear suitable protective clothing If ingested, seek medical advice immediately and show
the container or the label. Avoid contact with skin and eyes Keep away from incompatibles such as oxidizing agents.

p. 2
Storage:
No specific storage is required. Use shelves or cabinets sturdy enough to bear the weight of the chemicals. Be sure that it is
not necessary to strain to reach materials, and that shelves are not overloaded.

Section 8: Exposure Controls/Personal Protection

Engineering Controls:
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended
exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants
below the exposure limit.
Personal Protection:
Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid
inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this
product.
Exposure Limits:
TWA: 0.31 (ppm) TWA: 5 (mg/m3) from ACGIH [1995] Consult local authorities for acceptable exposure limits.

Section 9: Physical and Chemical Properties

Physical state and appearance: Solid. (Solid crystalline powder.)


Odor: Odorless.
Taste: Not available.
Molecular Weight: 381.37 g/mole
Color: White.
pH (1% soln/water): 10 [Basic.]
Boiling Point: Decomposes.
Melting Point: 75C (167F)
Critical Temperature: Not available.
Specific Gravity: 1.73 (Water = 1)
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water.
Solubility:
Soluble in cold water, hot water. Insoluble in methanol.

Section 10: Stability and Reactivity Data

p. 3
Stability: The product is stable.
Instability Temperature: Not available.
Conditions of Instability: Not available.
Incompatibility with various substances: Reactive with oxidizing agents.
Corrosivity: Non-corrosive in presence of glass.
Special Remarks on Reactivity: Not available.
Special Remarks on Corrosivity: Not available.
Polymerization: Not available.

Section 11: Toxicological Information

Routes of Entry: Eye contact.


Toxicity to Animals: Acute oral toxicity (LD50): 2660 mg/kg [Rat.].
Chronic Effects on Humans: Not available.
Other Toxic Effects on Humans:
Hazardous in case of skin contact (irritant). Slightly hazardous in case of skin contact (permeator), of ingestion, of inhalation.
Special Remarks on Toxicity to Animals: Not available.
Special Remarks on Chronic Effects on Humans: Not available.
Special Remarks on other Toxic Effects on Humans: Ingestion of 5-10 grams has produced severe vomiting, diarrhea,
shock and death.

Section 12: Ecological Information

Ecotoxicity: Not available.


BOD5 and COD: Not available.
Products of Biodegradation:
Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of degradation are more toxic.
Special Remarks on the Products of Biodegradation: Not available.

Section 13: Disposal Considerations

Waste Disposal:

Section 14: Transport Information

DOT Classification: Not a DOT controlled material (United States).


Identification: Not applicable.
Special Provisions for Transport: Not applicable.

Section 15: Other Regulatory Information

p. 4
Federal and State Regulations:
Pennsylvania RTK: Sodium borate Massachusetts RTK: Sodium borate TSCA 8(b) inventory: Sodium borate
Other Regulations: Not available..
Other Classifications:
WHMIS (Canada): Not controlled under WHMIS (Canada).
DSCL (EEC): R36/38- Irritating to eyes and skin.
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 0
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 2
Flammability: 0
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Splash goggles.

Section 16: Other Information

References:
-Hawley, G.G.. The Condensed Chemical Dictionary, 11e ed., New York N.Y., Van Nostrand Reinold, 1987. -SAX, N.I.
Dangerous Properties of Indutrial Materials. Toronto, Van Nostrand Reinold, 6e ed. 1984. -The Sigma-Aldrich Library of
Chemical Safety Data, Edition II.
Other Special Considerations: Not available.
Created: 10/09/2005 06:29 PM
Last Updated: 05/21/2013 12:00 PM

The information above is believed to be accurate and represents the best information currently available to us. However, we
make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume
no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for
their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for
lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com
has been advised of the possibility of such damages.

p. 5

You might also like