Scribd
Upload
280 views

Bimcom Quickstart

Bimcom Quickstart manual

Uploaded by

jk2001
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
280 views

Bimcom Quickstart

Bimcom Quickstart manual

Uploaded by

jk2001
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BimCOM Quick Start Guide

www.obdtester.com/bimcom www.secons.com [email protected]

BimCOM software and drivers installation


1. Insert attached CD to your CD-ROM.
2. Run installation file BimCOMSetup.exe
3. Choose language of installer

4. Choose your destination folder for BimCOM

BimCOM interface drivers are automatically updated during BimCOM installation. When prompted to install
unsigned drivers, click on Install this driver software anyway (Microsoft Windows 7) or Continue
Anyway (Microsoft Windows XP. ).

Microsoft Windows will automatically install drivers when you plug-in the BimCOM interface to USB port.

You should not be connected to a vehicle until now.

Please note: all program files (including updates) and documentation is available on enclosed CD-ROM or
downloadable from www.obdtester.com/downloads.
Connect BimCOM to the vehicle starting with diagnosis
1. Connect the BimCOM interface to your computer. LED indicator should start blinking.

2. Connect BimCOM to OBD-II connector in the vehicle.


If you cannot find location of the OBD-II connector, you can use BimCOM location image database,
available under OBD-II Connector location from main menu:

3. Set-up BimCOM application


4. Select Settings from BimCOM main menu and configure
BimCOM interface port. If no ports are shown, click Refresh
button. Then choose appropriate port and click on Test Interface
to make sure everything is OK. Then you should see updated
interface information. Now click on Apply changes or Save
changes button to save changes and return to main menu.

Now your computer is ready to connect to control units. In main menu, you can use either direct control unit
selection (by clicking on Select Control unit button), or perform Auto-scan, which will list all control units
installed in the vehicle. Make sure you have selected correct model and model year.

Reporting problems and feature requests


In order to resolve any issue or add new functionality we need:
Car information (VIN code, model, manufacture year, engine)
ECU snapshot (Control Unit Identification Save ECU information)
Log file (save it after operation in Settings Save Debug)

Description of problem and required data above please send us at: [email protected]

If you encounter any other difficulties, please do not hesitate to contact us at [email protected] or call us at
+44 1323 888 099 , +420 222 743 723 or +1 631 536 7761 (operated from Europe).

You might also like