Scribd Logo
Upload

Welcome to Scribd!

  • 64 views

    PL-2303HX Product Brochure 011706

    Uploaded by

    m_tariq_hn
    The PL-2303HX is a USB to serial bridge controller that provides a low cost solution for connecting RS-232 serial devices to USB ports on hosts like computers. It simulates a traditional COM port to allow existing serial port applications to work over USB. The controller has a small footprint, low power consumption, and supports flexible serial signal levels to connect to devices operating from 3.3V to 1.8V. It integrates components like a clock generator and OTP ROM to reduce external components and cost.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PL-2303HX Product Brochure 011706

    Uploaded by

    m_tariq_hn
    64 views1 page
    The PL-2303HX is a USB to serial bridge controller that provides a low cost solution for connecting RS-232 serial devices to USB ports on hosts like computers. It simulates a traditional COM port to allow existing serial port applications to work over USB. The controller has a small footprint, low power consumption, and supports flexible serial signal levels to connect to devices operating from 3.3V to 1.8V. It integrates components like a clock generator and OTP ROM to reduce external components and cost.

    Original Description:

    PROIFIC SERIAL COM

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The PL-2303HX is a USB to serial bridge controller that provides a low cost solution for connecting RS-232 serial devices to USB ports on hosts like computers. It simulates a traditional COM port to allow existing serial port applications to work over USB. The controller has a small footprint, low power consumption, and supports flexible serial signal levels to connect to devices operating from 3.3V to 1.8V. It integrates components like a clock generator and OTP ROM to reduce external components and cost.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    64 views1 page

    PL-2303HX Product Brochure 011706

    Uploaded by

    m_tariq_hn
    The PL-2303HX is a USB to serial bridge controller that provides a low cost solution for connecting RS-232 serial devices to USB ports on hosts like computers. It simulates a traditional COM port to allow existing serial port applications to work over USB. The controller has a small footprint, low power consumption, and supports flexible serial signal levels to connect to devices operating from 3.3V to 1.8V. It integrates components like a clock generator and OTP ROM to reduce external components and cost.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PL-2303HX-Edition Product Brochure

    V0.0 01/17/06
    1

    PL-2303HX-Edition (Rev D)
    USB to Serial Bridge Controller
    OVERVIEW

    The PL-2303HX is a low cost and high performance USB-to-Serial Bridge Controller. The PL-2303HX
    provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any
    Universal Serial Bus (USB) capable host. The PL-2303HX highly compatible drivers could simulate the
    traditional COM port on most operating systems allowing the existing applications based on COM port to
    easily migrate and be made USB ready. The PL-2303HX is exclusively designed for mobile and embedded
    solutions in mind, providing a small footprint that could easily fit in to any connectors and handheld devices.
    With very small power consumption in either operating or suspend mode, the PL-2303HX is perfect for bus
    power operation with plenty of power left for the attached devices. Flexible signal level requirement on the
    RS-232 serial port side also allows the PL-2303HX to connect directly to 3.3V ~ 1.8V devices. PL-2303HX
    integrates on-chip clock generator and OTP ROM to save external crystal and EEPROM. Customers can
    design with effective BOM cost and compact PCB size.

    FEATURES BLOCK DIAGRAM


    5V 3.3V USB1.1
     Full compliance with the USB Specification v1.1 Interface
     On-chip USB 1.1 transceiver and 5V3.3V regulator
     Supports RS-232 serial interface with Programmable
    baud rate from 75 bps to 12 Mbps (Rev D)
     Supports RS422/RS485 interface (Rev D)
     Integrates on-chip Clock Generator (Rev D) Clock USB Transceiver
    Regulator
     On-chip OTP (One Time Programming) ROM for startup Generator
    device configurations like product string and serial USB SIE
    Power Management
    number string (Rev D)
     Extensive flow control mechanism like adjustable
    high/low watermark level, automatic hardware or USB EndPoint Controller
    software flow control, and inbound data buffer overflow
    detection
     Configurable 256-byte outbound buffer and 256-byte
    inbound buffer; or 128-byte outbound buffer and ROM Data Buffer

    384-byte inbound buffer


     Supports remote wake-up from MODEM input signals
     Supports up to 8 GPIO pins (Rev D) - 4 General RS232/422/485 I/F
    OTP ROM
    Purpose I/O pins & 4 Auxiliary General Purpose I/O Controller
     Package type: SSOP28 / QFN32

    RS-232/422/485 Device

    Prolific Technology Inc.


    7F, #48, Sec.3, Nan-Kang Rd., Taipei, Taiwan 115, ROC
    Tel: 886-2-2654-6363 Fax: 886-2-2654-6161
    E-mail: [email protected]
    http://www.prolific.com.tw

    You might also like