Food Spoilage PDF

FOOD AND INDUSTRIAL MICROBIOLOGY
Food spoilage, food infections and intoxications caused by microorganisms and

methods for their detection
Dr. Neeraj Dilbaghi
Reader, Department of Bio & Nano Technology
Guru Jambheshwar University of Science and Technology
Hisar- 125001
and
Dr (Mrs.) S. Sharma
Professor, Department of Microbiology,
CCS Haryana Agricultural University,
Hisar- 125001
(Revised 25-Sep-2007)
CONTENTS
Introduction
Food Spoilage and General Principles Underlying Spoilage of Food
Intrinsic Parameters
Extrinsic Parameters
Microbial Spoilage of Foods
Spoilage of fresh and ready-to-eat meat products
Spoilage of milk and milk products
Spoilage of fruits and vegetables
Spoilage of canned foods
Major Food Borne Infections/ Intoxications Caused by Bacteria
General Control Measures for Prevention of Food Borne Diseases
Microbial Testing of Foods
Conventional Methods
Rapid Detection of Emerging High Risk Pathogens in Foods
Keywords
Food spoilage, microbial food spoilage, Food borne infections; Food testing; Food borne diseases
Introduction
Foods and microorganisms have long and interesting associations which developed long before
the beginning of recorded history. Foods are not only nutritious to consumers, but are also
excellent source of nutrients for microbial growth. Depending upon the microorganisms present,
foods may spoil or preserved by fermentation.
Microorganisms can be used to transform raw foods into fermented delights, including yoghurt,
cheese, sausages, tempeh, pickles, wine, beers and other alcoholic products. On the other hand,
foods also can act as a reservoir for disease transmission, and thus detection and control of
pathogens and spoilage organisms are important areas of food microbiology. During the entire
sequence of food handling from the producer to the final consumer, microorganisms can affect
food quality and human health.
History of microorganisms in food

There is no documentation to exactly pinpoint as to when man first became aware of the
presence of microorganisms in food. The year 1674 marks the birth year of microbiology when
Leeuwenhoek first examined microorganisms in a sample of lake water. It was after about 100
years when Microbiology was established as science. Several experiments conducted by
scientists to explain the origin of microorganisms provided indirect evidence of association of
microorganisms in food. The period prior to establishment of Microbiology/ Bacteriology as
science is designated as prescientific era which includes a food gathering period and food
producing period.
Food gathering period covers time of man's origin about 3 million years up to 8000-10000 years
ago. In this period man was carnivorous and plant foods entered his diet later. Man also learnt to
cook food during this period also.
Food producing period ranges from 8000- 10000 years ago and includes present time. Many
problems related to prepared foods were encountered during this period for example the problem
of food spoilage due to improper storage and problem of food poisoning with prepared foods as
well as problem of disease transmission by foods. Although scientific basis for the preservation
of foods were not known at that time but some of the methods used for preservation were use of
oils, snow, smoking of meats, etc.
Perhaps the first man to suggest role of microorganisms in food spoilage was a Monk Kircher
who referred to worms in decaying bodies, spoiled milk etc. The observations by Spallanzani
that heated meat infusion in a hermetically sealed flask remained unspoiled and free from
microorganisms and experiments by Pasteur while disproving the spontaneous generation theory
demonstrated the idea of food preservation by heat.
The spoilage of food and presence of food poisoning organisms in food are very important from
the point of food safety. Today the emphasis is on total quality of food which means that not
only food should be nutritionally balanced but should be microbiologically safe too. In this
chapter we will study general principles of microbial spoilage of food, detection and enumeration
of food spoilage and food poisoning microorganisms. The spoilage of some important foods and
2
characteristics of important food poisoning organisms which are very important for food safety
will also be discussed.
Food Spoilage and General Principles Underlying Spoilage of Food

Spoilage of food involves any change which renders food unacceptable for human consumption
and may result from a variety of causes, which includes i) insect damage; ii) physical injury due
to freezing, drying, burning, pressure, drying, radiation etc; iii) activity of indigenous enzymes in
plant and animal tissues; iv) chemical changes not induced by microbial or naturally occurring
enzymes. These changes usually involved O2, light and other than microbial spoilage, are the
most common cause of spoilage e.g. oxidative rancidity of fats and oils and the discoloration of
cured meats; and v) growth and activity of microorganisms- bacteria, yeasts and molds.
A food unfit for consumption may not necessarily be spoiled and may contain high number of
food poisoning causing bacteria. Microbial deterioration of food is evidenced by alteration in the
appearance (color changes, pockets of gas/ swelling), texture (soft & mushy), color, odor, and
flavor or slime formation.
Since foods are of plant & animal origin, so it is worthwhile to consider those characteristics of
plant & animal tissues that affect microbial growth. The plants and animals that serve as food
sources have all evolved mechanisms of defense against the invasion and proliferation of
microorganisms, and some of these remain in effect in fresh foods. Knowledge of sources of
microorganisms and factors influencing microbial growth is necessary for food microbiologists
because desirable growth conditions are needed for applicability of microorganisms for
fermentation & single cell protein production and understanding of undesirable conditions are
used for food preservation. The various sources through which microorganisms gain entry into
the foods are shown in Table 1.
Table 1: Primary sources of microorganisms found in foods
Sources
Microflora present in soil and water
Microflora present in air
Microflora present on plant and plant products
Microflora present on Food utensils and equipments
Microflora present in animal feeds
Microflora present on animal hides
Microflora present in Intestinal tracts of humans and animals
Food Handlers
In order to manage microbial contamination and growth from the farm up to the consumer, the
Hazard Analysis Critical Control Point (HACCP) approach is widely used. This approach
emphasizes monitoring the quality of food ingredients at critical process handling steps. A safe
product will result if the individual steps are carefully controlled. Now- a-days HACCP approach
has become mandatory for the food processing industries to ensure that safe foods are available
to the public.
3
A variety of intrinsic and extrinsic factors determine whether microbial growth will preserve or
spoil foods, as shown in Table. 2. Intrinsic or food related parameters are those parameters of
plants and animal tissues which are inherent part of the tissue. e.g., pH, water activity (aW),
oxidation-reduction potential (Eh), nutrient content, antimicrobial constituents and biological
structures. Extrinsic or environmental parameters are properties of storage environments which
affect both foods as well as microorganisms and include temperature of storage, relative
humidity of storage environment, and concentration of gases in environment.
Table 2: Factors affecting the development of microorganisms in foods
Intrinsic Factors Extrinsic factors Implicit factors Processing factors

Nutrient content Temperature Synergism Irradiation
pH Relative humidity Antagonism Washing
Redox potential Gaseous atmosphere Commensalism Slicing
Water activity Growth rate Pasteurization
Antimicrobial Packaging
constituents &
barriers
Intrinsic Parameters
Nutrient content
Like all other living beings, microorganisms need water, a source of carbon, an energy source, a
source of nitrogen, minerals, vitamins and growth factors in order to grow and function
normally. Since foods are rich source of these compounds, thus can be used by microorganisms
also. It is because of these reasons various food products like malt extracts, peptone, tryptone,
tomato juice, sugar and starch are incorporated in microbial media.
The inability to utilize a major component of the food material will limit its growth and put it at a
competitive disadvantage compared to those that can. In general, molds have the lowest
requirement, followed by yeasts, gram-negative bacteria, and gram-positive bacteria. Many food
microorganisms have the ability to utilize sugars, alcohols, and amino acids as sources of energy.
Few others are able to utilize complex carbohydrates such as starches and cellulose as sources of
energy. Some microorganisms can also use fats as the source of energy, but their number is quite
less. The primary nitrogen sources utilized by heterotrophic microorganisms are amino acids.
Also, other nitrogenous compounds which can serve this function are proteins, peptides and
nucleotides. In general, simple compounds are utilized first by a majority of microorganisms
e.g, amino acids. The same is true for fats and polysaccharides.
Some microorganisms may require B vitamins in small quantities and natural foods have these in
abundant quantities for those microorganisms which cannot synthesize them. In general, gram
negative bacteria and molds are able to synthesize most or all of their requirements.
Consequently, these two groups of organisms may be found growing on foods low in B vitamins.
Fruits tend to be low in B vitamins than meats and usually have low pH and positive Eh which
explains their spoilage by molds rather than bacteria.
4
Water Activity (aW)
Water is often the major constituent in foods. Even relatively dry foods like bread and cheese
usually contain more than 35% water. The state of water in a food can be most usefully described
in terms of water activity.
Water activity of a food is the ratio between the vapour pressure of the food, when in a
completely undisturbed balance with the surrounding air, and the vapour pressure of pure water
under identical conditions. Water activity, in practice, is measured as Equilibrium Relative
Humidity (ERH) and is given by the formula:
Water Activity (aW) = ERH / 100
Water activity is an important property that can be used to predict food safety, stability and
quality. The various applications of water activity includes; maintaining the chemical stability of
foods, minimizing non enzymatic browning reactions and spontaneous autocatalytic lipid
oxidation reactions, prolonging the desired activity of enzymes and vitamins in foods, optimizing
the physical properties of foods such as texture.
Water activity scale extends from 0 (bone dry) to 1.00 (pure water). But most foods have a water
activity in the range of 0.2 for very dry foods to 0.99 for moist fresh foods. Based on regulations,
if a food has a water activity value of 0.85 or below, it is generally considered as non-hazardous.
This is because below a water activity of 0.91, most bacteria including the pathogens such as
Clostridium botulinum cannot grow. But an exception is Staphylococcus aureus which can be
inhibited by water activity value of 0.91 under anaerobic conditions but under aerobic
conditions, it requires a minimum water activity value of 0.86. Most molds and yeasts can grow
at a minimum water activity value of 0.80. Thus a dry food like bread is generally spoiled by
molds and not bacteria. In general, the water activity requirement of microorganisms decreases
in the following order: Bacteria > Yeast > Mold. Below 0.60, no microbiological growth is
possible. Thus the dried foods like milk powder, cookies, biscuits etc are more shelf stable and
safe as compared to moist or semi-moist foods.
Factors that affect water activity requirements of microorganisms include the following- kind of
solute added, nutritive value of culture medium, temperature, oxygen supply, pH, inhibitors.
Each microorganism has a minimal water activity for growth as shown in Table 3. Water activity
of some foods and susceptibility to spoilage by microorganisms is shown in Table 4. Water acts
as an essential solvent that is needed for most biochemical reactions by the microorganisms.
Water activity of the foods can be reduced by several methods: by the addition of solutes or
hydrophilic colloids, cooking, drying and dehydration: (e.g., egg powder, pasta), or by
concentration (e.g. condensed milk) which restrict microbial growth so as to make the food
microbiologically stable and safe.
A wide variety of foods are preserved by restricting their water activity. These include:
Dried or Low Moisture Foods

These contain less than 25% moisture and have a final water activity between 0.0 and 0.60. e.g.,
Dried egg powder, milk powder, crackers, and cereals. These products are stored at room
5
temperature without any secondary method of preservation. These are shelf stable and do not
spoil as long as moisture content is kept low.
Table 3: Minimum water activity values of spoilage microorganisms
Microbial group Minimum aw Examples

Most bacteria 0.91 Salmonella spp., Clostridium botulinum
Most yeasts 0.88 Torulopsis spp.
Most molds 0.80 Aspergillus flavus
Halophilic bacteria 0.75 Wallemia sebi
Xerophilic molds 0.65 Aspergillus echinulatas
Osmophilic yeasts 0.60 Saccharomyces bisporus
Table 4: Water activity of some foods and susceptibility to spoilage by microorganisms
Water activity Microorganisms grow at this aw Food examples

and above
1.00 0.95 Pseudomonas, E.coli, Proteus, Highly perishable fresh foods & canned fruits,
Shigella, Klebsiella, Bacillus, vegetables, meat, fish, milk, eggs; foods
Clostridium perfringens & some containing up to 40% (w/w) sucrose or 7% NaCl.
yeasts
0.95 0.91 Salmonella, Vibrio parahemolyticus, Some cheeses (cheddar, Swiss), Cured meats;
Clostridium botulinum, Serratia, some fruit juice concentrates; bread; high moisture
Lactobacillus, Pediococcus; some prunes; foods containing 55%(w/w) sucrose or
molds and yeasts 12% NaCl
0.91 0.87 Many yeasts like Candida, Fermented sausages; sponge cakes; dry cheese;
Torulopsis, Hansenula; margarine; foods containing 65%(w/w) sucrose
Micrococcus (saturated) or 15% NaCl
0.87 0.80 Most molds, Staphylococcus aureus, Most fruit juice concentrates, sweetened
most Saccharomyces spp., condensed milk, flour, rice, pulses containing 15
Debaromyces 17% moisture, salami
0.80 0.75 Most halophilic bacteria, Jam, Marmalade, Glace fruits, Soy sauce
Mycotoxigenic Aspergilli
0.75 - 0.65 Xerophilic molds, Saccharomyces Rolled oats containing 10% moisture; Fudge;
bisporus Marshmallows; Jelly; Some dried fruits; Nuts,
Peanut Butter
0.65 - 0.60 Osmophilic yeasts, Few molds Dried fruits containing 15 20% moisture; Honey
0.50 No microbial proliferation Pasta containing 12% moisture; Spices containing
10% moisture
0.40 No microbial proliferation Whole egg powder containing 5% moisture
0.30 No microbial proliferation Cookies, biscuits crackers, bread crusts etc.

containing 3 5% moisture
0.20 No microbial proliferation Whole milk powder containing 2 3% moisture,
Dried vegetables containing 5% moisture, Corn
flakes containing 5% moisture, Instant coffee
6
Intermediate Moisture Foods
These foods contain between 15% and 50% moisture content and have a water activity between
0.60 and 0.85. These foods normally require added protection by secondary methods such as
pasteurization, pH control, refrigeration, preservatives, but they can also be stored at room
temperature. These include dried fruits, cakes, pastries, fruit cake, jams, syrups and some
fermented sausages. These products are usually spoiled by surface mold growth.
pH and Buffering capacity

The pH, or hydrogen ion concentration, [H+], of natural environments varies from about 0.5 in
the most acidic soils to about 10.5 in the most alkaline lakes. Since the pH is measured on a
logarithmic scale, the [H+] of natural environments varies over a billion-fold and some
microorganisms are living at the extremes, as well as every point between the extremes. The
range of pH over which an organism grows is defined by three cardinal points: the minimum pH,
below which the organism cannot grow, the maximum pH, above which the organism cannot
grow, and the optimum pH, at which the organism grows the best. Microorganisms which grow
at an optimum pH well below neutrality (7.0) are called acidophiles. Those which grow best at
neutral pH are called neutrophiles and those that grow best under alkaline conditions are called
alkalophiles. In general, bacteria grow faster in the pH range of 6.0- 8.0, yeasts 4.5-6.5 and
filamentous fungi 3.5-6.8, with the exception of lactobacilli and acetic acid bacteria with optima
between pH 5.0 and 6.0 (Table 5). The approximate pH ranges of some common food
commodities are shown in Table 6.
Table 5: Approximate pH ranges of different microbial groups
Minimum Optimum Maximum

Most Bacteria 4.5 6.5 7.5 9.0
Yeasts 1.5 3.5 4.0 6.5 4.0 6.5
Molds 1.5 3.5 4.5 6.8 8.0 11.0
Table 6: Approximate pH ranges of some common food commodities
Product pH
Citrus fruits 2.0-5.0
Soft drinks 2.5-4.0
Apples 2.9-3.3
Bananas 4.5-4.7
Beer 3.5-4.5
Meat 5.6-6.2
Vegetables 4.0-6.5
Fish ( most spp) 6.6-6.8
Milk 6.5-6.8
Wheat flour 6.2-6.8
Egg white 8.5-9.5
Fermented shark 10.5-11.5
7
The acidity of a product can have important implications for its microbial ecology, and the rate
and character of its spoilage. For example, vegetables generally have a moderately acidic pH and
thus are spoiled by soft-rot producing bacteria such as Erwinia carotovora and pseudomonads,
while in fruits, a lower pH prevents bacterial growth and spoilage is caused by yeasts and molds.
Also, fish spoil more rapidly as compared to meat under chill conditions. The pH of meat (5.6) is
lower than that of fish (6.2-6.6) and this contributes to the longer storage life of meat. The pH-
sensitive genus Shewanella plays an important role in fish spoilage but has not been reported in
normal meat (pH<6.0).
The natural or inherent acidity of foods may be thought of as natures way of protecting the
respective plant or animal tissues from destruction by microorganisms. Thus, the ability of low
pH to restrict microbial growth has been deliberately employed since long in the preservation of
foods with acetic and lactic acids.
Redox Potential (Eh)

Microorganisms display varying degrees of similarity to Oxidation-Reduction potential of their
growth medium. The O/R potential is the measure of tendency of a revisable system to give or
receive electrons. When an element or compound looses electrons, it is said to be oxidized, while
a substrate that gains electrons becomes reduced. Thus a substance that readily gives up electrons
is a good reducing agent, while one that readily gains electrons is a good oxidizing agent. When
electrons are transferred from one compound to another, a potential difference is created between
the two compounds and is expressed in as millivolts (mV). If a substance in more highly
oxidized, the more positive will be its electrical potential and vive versa. The O/ R potential of a
system is expressed as Eh. Aerobic microorganisms require positive Eh values for growth while
anaerobic microorganisms require negative Eh values (reduced). The redox potential we measure
in a food is the result of several factors: redox couples present, ratio of oxidant to reductant, pH,
poising capacity, availability of oxygen and microbial activity. Some redox couples typically
encountered in food material and their standard redox potential (Eh) values are shown in Table 7.
Table 7: Some important redox couples and their standard redox potential (Eh) values
Couple E0 (mV)
O2/H2O +820
Fe3+/Fe2+ +760
Dehydroascorbic acid / ascorbic acid +80
Methylene blue ox/ red +11
Pyruvate/ lactate -190
NAD+/NADH -320
With the exception of oxygen, most of the couples present in foods, e.g, glutathione, cysteine,
ascorbic acid and reducing sugars tend to establish reducing conditions. pH of the food has a
bearing on the redox potential and for every unit decrease in the pH the Eh increases by 58 mV
(Table 8). As redox conditions change there will be some resistance to change in foods Eh, and
is known as poising and is similar to buffering of the medium. Poising is maximum when the two
8
redox couples are present in equal amounts. Oxygen is the most powerful of redox couple
present in food system and if the food is stored in the presence of air, high positive potential will
result. Thus, increasing the access to air by mincing, cutting, chopping, grinding of food will
increase the Eh as evident by high positive Eh of minced meat as compared to raw meat ( Table
8). Finally microbial growth in the food reduces the Eh due to oxygen depletion. The decrease in
Eh due to microbial activity forms the basis of some tests used frequently in raw milk such as
MBRT as described later in the chapter.
Table 8: Redox potential of some foods
Food Eh(mV) pH
Raw meat -200 5.7
Minced meat +225 5.9
Whole wheat -350 6.0
Ground grain (Barley) +225 7.0
Fruit juices +300 to + 3.0-5.5
Grape +410 3.8
Lemon +380 2.2
Antimicrobial constituents and barriers

Some foods can resist the attack by microorganisms due to presence of certain naturally
occurring substances which possess antimicrobial activity such as essential oils in spices (
eugenol in cloves and cinnamon, allicin in garlic, cinnamic aldehyde in cinnamon, thymol in
sage); lactaferrin, lactoperoxidase and lysozyme in milk; and ovatransferrin, avidin, lysozyme
and ovoflavoprotein in hens egg albumin. Similarly, casein as well as free fatty acids found in
milk also exhibit antimicrobial activity. The hydroxycinnamic acid derivatives (p-coumaric,
feluric, caffeic and chlorogenic acids) found in fruits, vegetables, tea and other plants possess
antibacterial and antifungal activity. Also natural covering of foods like shell of eggs and nuts,
outer covering of fruits and testa of seeds, hide of animals provide protection against entry and
subsequent spoilage by microorganisms.
Extrinsic Parameters
Temperature of storage
Microorganisms have been found growing in virtually all temperatures. A particular
microorganism will exhibit a range of temperature over which it can grow, defined by three
cardinal points in the same manner as pH considering the total span of temperature where liquid
water exists, the prokaryotes may be subdivided into several subclasses on the basis of one or
another of their cardinal points for growth. For example, organisms with an optimum
temperature near 37 degrees are called mesophiles. Organisms with an optimum temperature
between about 45 degrees and 70 degrees are thermophiles e.g, Bacillus, Clostridium etc. Some
archaebacteria with an optimum temperature of 80 degrees or higher and a maximum
temperature as high as 115 degrees, are now referred to as extreme thermophiles or
hyperthermophiles. The cold-loving organisms are psychrophiles defined by their ability to grow
at 0 degrees. A variant of a psychrophile (which usually has an optimum temperature of 10-15
9
degrees) is a psychrotroph, which grows at 0 degrees but displays an optimum temperature in the
mesophile range, nearer room temperature. Psychrotrophs are the scourge of food storage in
refrigerators since they are invariably brought in from their mesophilic habitats and continue to
grow in the refrigerated environment where they spoil the food. Of course, they grow slower at 2
degrees than at 25 degrees. Think how fast milk spoils on the counter top versus in the
refrigerator. In food microbiology mesophilic and psychrotrophic organisms are of greatest
importance.
Relative Humidity of the storage environment

Relative humidity and water activity are interrelated. When foods with low aW are stored in
environment of high humidity, water will transfer from the gas phase to the food and thus
increasing the aW of the food leading to spoilage by the viable flora. There is a relationship
between temperature and humidity which should be kept in mind. In general, the higher the
temperature, lower is the relative humidity and vice-versa. Foods that undergo surface spoilage
from molds, yeasts, and some bacteria should be stored in conditions of low relative humidity to
increase their shelf life. This can also be done by proper wrapping of the food material also.
However, variations in storage temperature should be minimal to avoid surface condensation in
packed foods.
Gaseous atmosphere
Oxygen is one of the most important gases which come in contact with food influence the redox
potential and finally the microbial growth as discussed earlier. The inhibitory effect of CO2 on
the growth of microorganisms is applied in modified atmosphere packaging of foods. The
storage of foods in atmosphere containing 10% of CO2 is referred to as Controlled
Atmosphere. This type of treatment is applied more commonly in case of fruits such as apples
and pears. With regards to the effect of CO2 on microorganisms, molds and Gram-negative
bacteria are the most sensitive, while the gram-positive bacteria, particularly the lactobacilli are
tend to be more resistant. Some yeasts such as Bretanomyces spp also show considerable
tolerance of high CO2 levels and dominates the spoilage microflora of carbonated beverages.
Some microorganisms are killed by prolonged exposure to CO2 but usually its effect is
bacteriostatic. Also, the presence of CO2 tends to decrease the pH of foods and thereby inhibiting
the microorganisms present in it by adversely affecting the solute transport, inhibition of key
enzymes involved in carboxylation/ decarboxylation reactions.
Microbial Spoilage of Foods

Most foods serve as good growth medium for many different microorganisms. Considering the
variety of foods and the methods used for processing, it is apparent that practically all kinds of
microorganisms are potential contaminants. Given a chance to grow, the microorganisms will
cause changes in appearance, flavor, odour and other qualities of foods. These degradation
processes includes:
Putrefaction:
Protein foods + proteolytic microorganisms amino acids +amines+ ammonia+ H2S.
10
Fermentation:
Carbohydrate foods +saccharolytic microorganisms organic acids + alcohol + gases.
Rancidity:
Fatty foods + lipolytic microorganisms fatty acids + glycerol.
Microorganisms cause spoilage not only by degradation of foods, but also by synthesis of
various products like pigments and polysaccharides leading to discolorations and formation of
slimes. The common spoilage defects that occur in different foods with some examples are
shown in Table 9.
Table 9: Types of food spoilage with some examples of casual organisms
Food Types of Spoilage Microorganisms involved

Bread Moldy Rhizopus nigricans, Penicillium
Ropy Bacillus subtilis
Pickles, Sauerkraut Film/ Pink Yeasts Rhodotorula
Fresh Meats Putrefaction Alcaligenes, Clostridium, Proteus vulgaris,
Pseudomonas fluorescens
Cured Meats Moldy Rhizopus, Aspergillus, Penicillium
Souring Pseudomonas, Micrococcus.
Greening, slime Lactobacillus, Leuconostoc
Fish Discolorations, Alcaligenes, Pseudomonas, Flavobacterium
Poultry Slime, Odor Alcaligenes, Pseudomonas
Eggs Colorless & Green Alcaligenes, Proteus, Pseudomonas, P.
Rots fluorescens
Concentrated Juices Off flavor Acetobacter, Lactobacillus, Leuconostoc
Fresh fruits and Soft rots Rhizopus, Erwinia
vegetables
Gray & black mold Botrytis, Aspergillus niger
Milk/ Cream Ropiness Alcaligenes viscolactis, Micrococcus,
Enterobacter, Lactobacillus, Streptococcus,
Bacillus
Decomposition of Yeasts, molds, Alcaligenes, Proteus,
fats Pseudomonas, Micrococcus, Bacillus,
Clostridium
Alkali formers Alcaligenes viscolactis, P. fluorescens
Flavor changes Lactobacillus,Streptococcus, Leuconostoc
Spoilage of fresh and ready-to-eat meat products

Raw Meat
Meats are the perishable of all important foods because of abundance of nutrients and moisture
content. Fresh meats from food animals and birds contain a large group of potential spoilage
11
bacteria that include species of Pseudomonas, Acinetobacter, Moraxella, Shewanella,
Alcaligenes, Escherichia, Enterobacter, Serratia, Hafnia, Proteus, Brochothrix, Micrococcus,
Enterococcus, Lactobacillus, Leuconostoc, Carnobacterium, and Clostridium, as well as yeasts
and molds. The kind and amount of spoilage of meat depends upon the availability of nutrients,
presence of oxygen, temperature of storage, pH, the storage time of the product, and the
generation time of the spoilage microorganisms under a given environment. Post-rigor meats are
rich in non-protein nitrogenous compounds, peptides and proteins, but low in carbohydrates,
with a pH of about 5.5 and Aw > 0.97.
In order to prevent microbial spoilage, fresh meats are stored at refrigerated temperature ( 5C).
Thus normally psychrotrophic bacteria will be the most predominant types in raw meat spoilage.
Under aerobic storage at low temperature, growth of psychrotrophic aerobes and facultative
anaerobes is favored e.g, Pseudomonas spp. In meats with high pH and/or low glucose content,
Acinetobacter and Moraxella, which preferentially metabolize amino acids instead of glucose,
can grow rapidly and produce undesirable odors. The various spoilage defects of meats are
shown in Table 10.
Table 10: Different types of spoilage of meats
Aerobic or Defect Microorganisms involved

Anaerobic
spoilage
Aerobic Surface Slimes Alcaligenes,Pseudomonas,Lactobacillus,
(Bacterial) Leuconostoc, Micrococcus, Bacillus
Bloom of Discolorations Lactobacillus, Leuconostoc
Rancidity Pseudomonas, Achromobacter
Phosphorescence Photobacterium spp
Red spot Serratia marcescens
Yellow discolorations Micrococcus, Flavobacterium
Off-odors off-tastes Lactic acid bacteria, Actinomycetes.
(Taints)
Aerobic (Yeasts) Discolorations/Taints/ Rhodotorula
sliminess/ lipolysis
Aerobic (Molds) Stickiness Rhizopus, Aspergillus, Penicillium
Whiskers Rhizopus, Thamnidium, Mucor
Black spot Cladosporium herbarium
White spot Sporotrichum carnis
Green Patches Penicillium expansum, P. oxalicum
Decomposition of fats Lipolytic molds
Taints Penicillium, Thamnidium
Anaerobic Souring Clostridium spp
(Bacterial)
Putrefaction Alcaligenes, Pseudomonas, Clostridium spp
Taints Alcaligenes, Pseudomonas
12
In vacuum-packaged meats, psychrotrophic facultative anaerobes and obligate anaerobes can
grow and result in different types of spoilage. Lactobacillus curvatus and Lb. sake metabolize
glucose to produce lactic acid and the amino acids leucine and valine to volatile fatty acids like
isovaleric and isobutyric acids which impart a cheesy flavor in meat. Heterofermentative
Leuconostoc carnosum and Leuconostoc gelidum produce CO2, and small quantity of lactic acid,
causing accumulation of gas and liquid in the package. Facultative anaerobic Enterobacter,
Serratia, Proteus, and Hafnia species metabolize amino acids while growing in meat to produce
amines, ammonia, methylsulfides, and mercaptans, and cause putrefaction. Some strains also
produce H2S in small amounts to cause greening of the meat. Shewanella putrefaciens, which
can grow under both aerobic and anaerobic conditions, metabolizes amino acids (particularly
cysteine) to produce methylsulfides and H2S in large quantities. Along with offensive odors they
adversely affect the normal color of meats. H2S oxidizes myoglobin to a form of metmyoglobin,
causing a green discoloration.
To reduce spoilage of' Fresh meats, storage at low temperatures (~ 0 to 1C), modified
atmosphere packaging, and vacuum packaging are extensively used. Several other methods to
reduce initial microbial load and slow down growth of Gram-negative rods have been used
which include the addition of small amounts of organic acids to lower the pH of meat (slightly
above pH 5.0), drying of meat surfaces (to reduce aW), and a combination of the above factors
including lower storage temperature.
Ready-to-Eat Meat Products

Ready-to-Eat Meat Products includes high heat-processed and low heat-processed uncured and
cured meat products. High heat-processed cured and uncured meats are given heat treatment to
make them commercially sterile. Thus they may only have some thermophilic spores surviving,
which will not germinate unless the products are temperature abused. Low heat-processed
uncured meats, such as roasts, are given heat treatment ranging from 140 to 150F internal
temperature (60 to 65C) for 1h or more depending upon the size of the meat. Under this
condition, only the spores of Bacillus and Clostridium spp. and some extremely thermoduric
species like Lactobacillus viridescens, some Enterococcus, Micrococcus can survive. Many
other types of microorganisms can enter into the products from equipment, personnel, and air as
post-heat contaminants. Also, spices and other ingredients added to the products can add to the
microbial contamination of the products. Psychrotrophic facultative anaerobic and obligate
anaerobic bacteria have been implicated in the spoilage of these products. Gas production and
purge accumulation by psychrotrophic Clostridium spp., along with off flavor and color
changing from brown to pink to red have been detected. The vacuum-packaged and gas-
packaged products, during storage, can be spoiled by psychrotrophic Lactobacillus and
Leuconostoc spp. In some products, growth of Serratia liquifaciens causes amino acid
breakdown, leading to production of ammonia-like flavor. In case of unpackaged cooked
products putrefaction results from the growth and protein degradation by the proteolytic Gram-
positive bacteria. If the products are stored for a long time, yeasts and molds can also grow,
causing off-flavour, discoloration, and sliminess. Due to the growth of H2O2-producing lactic
acid bacteria, the products may have green to gray discoloration.
13
Spoilage of milk and milk products
Raw Milk
Raw milk contains many types of microorganisms coming from different sources. The average
composition of cow's milk is 3.2% protein, 4.8% carbohydrates, 3.9% lipids, and 0.9% minerals.
Besides casein and lactalbumin, it has free amino acids that provide a good N-source. As the
main carbohydrate is lactose, those microorganisms with lactose-hydrolyzing enzymes (lactase
or -galactosidase) have an advantage over those unable to metabolize lactose. Milk fat can be
hydrolyzed by microbial lipases, with the release of small molecular volatile fatty acids (butyric,
capric, and caproic acids). The various spoilage defects of milk and milk products are shown in
Table 9.
Microbial spoilage of raw milk can potentially occur from the metabolism of lactose,
proteinaceous compound, fatty acids (unsaturated), and the hydrolysis of triglycerides. If the
milk is refrigerated immediately following milking and stored for days, the spoilage will be
predominantly caused by the Gram-negative psychrotrophic rods, such as Pseudomonas,
Alcaligenes, Flavobacterium spp., and some coliforms. Pseudomonas and related species, being
lactose-negative, will metabolize proteinaceous compounds to change the normal flavor of milk
to bitter, fruity, or unclean. The growth of lactose-positive coliforms will produce lactic, acetic,
and formic acids, C02, and H2 leading to curdling and souring of milk. Some Alcaligenes spp and
coliforms can also cause ropiness (sliminess) due to production of viscous polysaccharides.
However, if the raw milk is not refrigerated soon, growth of mesophiles predominates e.g,
Lactococcus, Lactobacillus, Enterococcus, Bacillus, and coliforms, along with Pseudomonas,
Proteus, and others causing changes like souring and curdling of milk. Yeast and mold growth,
under normal conditions, is generally not expected.
Pasteurized Milk
Pasteurized milk contains various thermoduric bacteria like Micrococcus, Enterococcus,
Lactobacillus, Streptococcus, Corynebacterium, and spores of Bacillus and Clostridium which
survive pasteurization process. In addition, coliforms, Pseudomonas, Alcaligenes, and
Flavobacterium etc can enter as post-pasteurization contaminants. Thus, pasteurized milk has a
limited shelf life under refrigerated storage mainly due to growth of these psychrotrophic
contaminants. The spoilage pattern of pasteurized milk is the same as described for raw milk.
Flavor defects from their growth are detectable when the population reaches 106 cells/ml.
Growth of psychrotrophic Bacillus spp., such as Bacillus cereus, has been implicated in the
spoilage of pasteurized refrigerated milk, especially when the levels of post-pasteurization
contaminants are low. Production of rennin-like enzymes by the psychrotrophs can cause sweet
curdling of milk at higher pH than required for acid curdling.
Ultrahigh temperature-treated milk (150C for a few seconds) is an essentially commercially

sterile product that can only contain viable spores of some thermophilic bacteria. The milk is not
susceptible to spoilage at ambient storage temperature, but can be spoiled if exposed to high
temperatures as such with canned foods.
14
Concentrated Liquid Products
Evaporated milk, condensed milk, and sweetened condensed milk are principal types of
concentrated dairy products that are susceptible to limited microbial spoilage during storage. All
these products are given sufficient heat treatments to kill vegetative microorganisms as well as
spores of molds and some bacteria.
Evaporated milk is condensed whole milk with 7.5% milk fat and 25% total solids. It is packaged
in hermetically sealed cans and heated to obtain commercial sterility. Under proper processing
conditions, only thermophilic spores of spoilage bacteria Bacillus species, such as B. coagulans,
can cause coagulation of milk.
Condensed milk is generally condensed and has about 10 to 12% fat and 36% total solids. The
milk is initially given a low heat treatment, close to pasteurization temperature, and then
subjected to evaporation under partial vacuum (at about 50C). Thus only thermoduric
microorganisms can grow and cause spoilage. Other microorganisms can also get into the
product during the condensing process.
Sweetened condensed milk contains about 8.5% fat, 28% total solids, and 42% sucrose. The milk
is initially heated to a high temperature (80 to 100C) and then condensed at about 60C under
vacuum and put into containers. It is susceptible to spoilage from the growth of osmophilic
yeasts like Torula spp, causing gas formation. If the containers have enough head space and
oxygen, molds (e.g., Penicillium and Aspergillus) can grow on the surface which gains entry into
the product by recontamination after heat treatment.
Butter
Butter contains 80% milk fat and can be salted or unsalted. The microbiological quality of butter
depends upon the quality of cream and the sanitary conditions used in the processing. Growth of
bacteria (Pseudomonas spp.), yeasts (Candida spp.), and molds (Geotrichum) on the surface
have been implicated in flavor defects (putrid, rancid, or fishy) and surface discoloration. In
unsalted butter, coliforms, Enterococcus, and Pseudomonas can grow favorably in water-phase
and produce flavor defects.
Spoilage of fruits and vegetables

Vegetables
The main sources of microorganisms in vegetables are soil, water, air, and other environmental
sources, and can include some plant pathogens. Fresh vegetables are fairly rich in carbohydrates
(5% or more), low in proteins (about 1 to 2%), and, except for tomatoes, have high pH.
Microorganisms grow more rapidly in damaged or cut vegetables. The presence of air, high
humidity, and higher temperature during storage increases the chances of spoilage. The common
spoilage defects are caused by molds belonging to genera Penicillium, Phytophthora, Alternaria,
Botrytis, and Aspergillus. Among the bacterial genera, species from Pseudomonas, Erwinia,
Bacillus, and Clostridium are important.
Microbial vegetable spoilage is generally described by the common term rot, along with the
changes in the appearance, such as black rot, gray rot, pink rot, soft rot, stem-end rot (Table 11)
15
Refrigeration, vacuum or modified atmosphere packaging, freezing, drying, beat treatment, and
chemical preservatives are used to reduce microbial spoilage of vegetables.
Table 11: Common spoilage defects of fruits and vegetables
Defect Casual organism

Bacterial soft rot Erwinia carotovora
Gray mold rot Botrytis cinerea
Rhizopus soft rot Rhizopus nigricans
Blue mold rot Penicillium spp
Alternaria rot Alternaria spp
Pink mold rot Trichothecium roseum
Green mold rots Cladosporium, Trichoderma
Watery soft rot, Brown rot Sclerotinia sclerotiorum
Downy mildew Phytophthora, Bremia
Sliminess or souring Saprophytic bacteria
Black rot/ smut/ Black mold Alternaria / Aspergillus niger
Anthracnose Coletotrichum lindemuthianum
Fruits
Fresh fruits have high carbohydrate content (10% or more), very low protein (10%), but have
pH 4.5 or below. Thus microbial spoilage of fruits and fruit products is confined to molds,
yeasts, and aciduric bacteria like lactic acid bacteria, Acetobacter, Gluconobacter. Like fresh
vegetables, fresh fruits are susceptible to rot by different types of molds from genera Penicillium,
Aspergillus, Alternaria, Botrytis, Rhizopus, and others. According to the changes in appearance,
the mold spoilages are designated as black rot, gray rot, soft rot, brown rot, and others (Table
11). Yeasts Saccharomyces, Candida, Torulopsis, and Hansenula cause fermentation of some
fruits such as apples, strawberries, citrus fruits, and dates. Bacterial spoilage associated with the
souring of berries and figs has been attributed to the growth of lactic acid and acetic acid
bacteria. To reduce spoilage, fruits and fruit products are preserved by refrigeration, freezing,
drying, and reducing aW, vacuum packaging and heat treatment (Fig. 1).
Fermented Vegetable and Fruit Products

Fermented vegetables like pickles/cucumber and sauerkraut are produced in large volumes. In
salt stock pickles containing about 15% salt, yeasts and halophilic bacteria can grow, especially
if the acidity is not sufficient. Dill pickles with low salt (<5%) can have a bloating defect from
CO2 production by yeasts (Candida, Torulopsis, and Saccharomyces spp), Heterofermentative
lactic acid bacteria, and coliforms. Sweet and sour pickles preserved with sugar and vinegar can
be spoiled by yeasts and lactic acid bacteria, if the acid level is not sufficient. Sauerkraut can be
spoiled from the growth of yeasts and molds if the air is not excluded during fermentation of
cabbage. Also, coliforms and other Gram-negative bacteria can multiply to produce undesirable
flavor and texture and color defects. Olives are fermented for a long time and are susceptible to
many types of spoilage defects such as gassiness (bloating) due to CO2 production by
heterofermentative lactic acid bacteria, coliforms, and yeasts.
16
A B
C D
Fig. 1: Spoilage defects of fruits & vegetables A) Watery soft
rot in apple caused by Sclerotinia sclerotiorum; B) Blue mould
rot in tomato caused by Penicilliumi spp.; C) Storage rot in
strawberry caused by Botrytis cinerea; D) Strawberries
preserved by vacuum packaging and freezing.
Spoilage of canned foods

Canned foods are heat treated to kill microorganisms present and the extent of heat treatment is
predominantly dependent on the pH of a food. High pH (> 4.6/ low acid) foods are heated to
destroy most heat-resistant spores of pathogenic bacteria, Clostridium botulinum, to ensure that a
product is free of any pathogen. However, spores of some spoilage bacteria, which have greater
heat resistance, can survive. Such products are called commercially sterile foods. The other food
group designated as low pH or high acid food with pH 4.6 and below, is given heat treatment to
kill all vegetative cells and some spores. Although low pH will inhibit germination and growth of
C. botulinum, spores of some aciduric thermophilic spoilage bacteria can germinate and grow
when the products are stored at higher temperatures, even for a short time, which facilitates
germination. Some spores of thermoduric mesophilic spoilage bacteria (including pathogenic)
can also survive, heating in these products, but they are inhibited by the low pH.
Canned food spoilage is due both to nonmicrobial (chemical and enzymatic reactions) and
microbial reasons. Production of hydrogen (hydrogen swell), C02, browning, corrosion of cans
due to chemical reactions and liquification, gelation, discoloration of products due to enzymatic
17
reactions are some examples of nonmicrobial spoilage. Microbial spoilage is due to three main
reasons:
1. inadequate cooling after heating or high-temperature storage, allowing germination and
growth of thermophilic spore formers;
2. inadequate heating, resulting in survival and growth of mesophilic microorganisms; and
3. leakage (microscopic) in the cans, allowing microbial contamination from outside
following heat treatment and their growth.
Thermophilic Sporeformers
Thermophilic sporeformers can cause three types of spoilage of low-acid foods such as corn,
beans, peas etc when the cans are temperature abused at 43C and above, even for short duration.
1. Flat Sour Spoilage

In this type of spoilage, the cans do not swell but the products become acidic due to growth of
facultative anaerobic Bacillus stearothermophilus. The organism ferments carbohydrates to
produce acids without gas.
2. Thermophilic Anaerobe (TA) Spoilage

This type of spoilage occurs due to the growth of anaerobic Clostridium thermosaccharolyticum
which leads to the production of large quantities of H2 and CO2 gas and swelling of cans.
3. Sulfide Stinker Spoilage

Gram-negative anaerobic sporeformer Desulfotomaculum nigrificans is responsible for this type
of spoilage. The spoilage is characterized by flat container but darkened products with the odor
of rotten eggs due to H2S produced by the bacterium.
Spoilage Due to Insufficient Heating

Insufficient heat treatment results in the survival of mainly spores of Clostridium and some
Bacillus spp. Following processing, they can germinate and grow to cause spoilage. The most
important concern is the growth of C. botulinum and production of toxins. Spoilage can be either
from the breakdown of carbohydrates or proteins. Several Clostridium spp., ferment
carbohydrates to produce volatile acids and H2 and CO2 gas, causing swelling of cans.
Proteolytic species, metabolize proteins and produce foul-smelling H2S, mercaptans, indole,
ammonia, as well as CO2 and H2 (causing swelling of cans).
Spoilage Due to Container Leakage

Leakage of containers during transport will allow different types of microorganisms to get inside
the can. They can grow in the food and cause different types of spoilage depending upon the
microbial types. Contamination with pathogens will make the product unsafe.
Major Food Borne Infections/ Intoxications Caused by Bacteria

What is food borne disease?
Safe, nutritious foods are essential to human health and well-being. However, food-borne
diseases pose a significant problem worldwide. Foodborne disease is any illness resulting from
18
the consumption of food contaminated with one or more disease-producing agents. These include
bacteria, parasites, viruses, fungi and their products as well as toxic substances not of microbial
origin (Table 12). The World Health Organization (WHO) estimates that 1.5 billion cases of
food-borne illnesses cause about 3 million deaths each year costing up to $40 billion in health
care and job-related absenteeism. More than 250 different food borne diseases have been
described. These different diseases have many different symptoms, so there is no one
"syndrome" that can be indicated as specific to food borne illness. However, the microbe or
toxin enters the body through the gastrointestinal tract, and often causes the first symptoms there,
so nausea, vomiting, abdominal cramps and diarrhea is common symptoms in many food borne
diseases.
Table 12: Possible causes of food borne gastro intestinal disorders
Viable pathogenic micro organisms (Bacteria, viruses, fungi) or their preformed toxins
Pathogenic algae, parasites, protozoa and their preformed toxins
Toxins naturally present or formed in some foods e.g, toxic mushrooms, some sea
foods, red kidney bean poisoning, biological amines in cheese and fermented meats etc.
Toxic chemicals in contaminated food and water, such as heavy metal and some
pesticides
Nutritional disorders such as rickets due to calcium deficiency
Allergy to or inability to utilize some normal components of food
Indigestion from over eating or other reasons
Types of Microbial Food Borne Diseases

On the basis of mode of illnesses, food borne disease (FBD) can be arbitrarily divided into three
groups. A more correct classification is shown in Fig. 2.
Intoxication
Illness in this case occurs as a consequence of ingestion of a pre formed bacterial or a mold toxin
due to its growth in a food. A toxin has to be present in the contaminated food. Once the micro
organism have grown and produced toxin in a food, there is no need of viable cells during the
consumption of the food for illness to occur .e.g, Staphylococcal food poisoning.
Infection
Illness occurs as a result of the consumption of food and water contaminated with
enteropathogenic bacteria. It is necessary for the cells of enteropathogenic bacteria to remain
alive in the food or water during consumption. The viable cells even if present in small numbers
have the potential too establish and multiply in the digestive tract to cause the illness. e.g,
Salmonellosis.
Toxicoinfection
Illness occurs from the ingestion of a large number of viable cells of some pathogenic bacteria
through contaminated food and water. Generally the bacterial cells either sporulate or die and
release toxin(s) to produce the symptoms. e.g. Bacillus cereus Gastroenteritis.
19
Food-Borne Diseases
Poisonings Infections
Bacterial
E.coli
Chemical Poisoning Intoxication
Salmonellosis
Bacillus cereus
Poisonous Poisonous Microbial intoxications C. perfringens
plant tissues animal tissues Listeriosis
Shigellosis
Yersiniosis
Algal toxins Mycotoxins Bacterial toxins Enteric viruses
Protozoan
Neurotoxins Entero toxins Helminthic
Clostridium botulinum Staphylococcus aureus
Fig. 2: Classification of food borne diseases
The other bacterial hazards responsible for food borne diseases are shown in Table 13 .The main
factors responsible for the food borne illness includes:
a) Improper holding temperature during processing.
b) Inadequate cooling during storage.
c) Contaminated equipments and utensils.
d) Food from unsafe source.
e) Poor personal hygiene.
f) Adding contaminated ingredients to cooked foods.
A detailed account of major bacterial pathogens is as follows:
1) Staphylococcal Food Poisoning

Caused by bacterium Staphylococcus aureus, Staphylococcal Food Poisoning is one of the most
common types of food poisoning.
Biology of Staphylococcus aureus

Staphylococcus aureus is a spherical bacterium (coccus) which on microscopic examination
appears singly, in pairs, or bunched, grape-like clusters (Fig. 3). They are Gram-positive,
facultative anaerobes, but grow rapidly under aerobic conditions. They are mesophiles with a
growth temperature range of 7 to 480C and have the ability to grow at low aW (0.86), low pH
(4.8), and high salt and sugar concentrations of 15% and in the presence of NO2. S. aureus are
naturally present in the nose, throat, skin, and hair of healthy humans, animals and birds. They
can be present in infections such as cuts, wounds, abscesses and facial acne etc. The
contamination generally occurs through these sources because of improper handling by infected
persons.
20
Table 13: Bacteria responsible for food borne illness
Type of disease Causative bacteria Kind and nature of the bacteria Major symptom(s)
type
Intoxication
Staph poisoning Staphylococcus aureus Gram-positive cocci, present in GIT
strains pairs, short chains or bunched
grape like clusters.
Botulism Clostridium botulinum Anaerobic, Gram-positive spore Non-gastric
strains forming rod.
Infection
Salmonellosis Over 2000 Salmonella Rod shaped, motile, non spore GIT
spp. (except S. typhi and forming Gram-negative bacteria
S. paratyphi)
Campylobacter enteritis Campylobacter jejuni & Gram-negative, slender, curved, GIT
Cam. coli strains motile, microaerophillic rod
Yersiniosis Yersinia enterocolitica Small rod-shaped, Gram-negative GIT
bacterium
Enterohemorrhagic E. E. coli 0157:H7 Gram-negative, motile, non- GIT and non-gastric
coli colitis sporulating, rod shaped
facultative anaerobic bacterium.
Non-hemorrhagic E. Shiga-like toxin producing Gram-negative, motile, non- GIT
coli strains E. coli strains like E. coli sporulating, rod shaped
026: H11 facultative anaerobic bacterium.
Listeriosis Listeria monocytogenes Motile, Gram-positive bacteria GIT and non-gastric
Shigellosis Four shigella spps. e.g. Gram-negative, non-motile, non- GIT
Sh. dysenteriae spore forming rods.
Vibrio parahemolyticus Vibrio parahemolyticus Gram-negative, curved bacteria GIT
gastroenteritis
Vibrio vulnificus Vibrio vulnificus Lactose-fermenting, halophilic, GIT and non-gastric
infection gram-negative, opportunistic
pathogen.
Brucellosis Brucella abortus Gram-negative bacteria GIT and non-gastric
Toxicoinfection
Clostridium perfringens Clostridium perfringens anaerobic, Gram-positive, spore GIT
gastroenteritis forming rod
Bacillus cereus Bacillus cereus Gram-positive, facultative aerobic GIT
gastroenteritis spore former rods
E. coli gastroenteritis Enteropathogenioc Gram-negative, motile, GIT
and enterotoxigenic non-sporulating, rod shaped,
E. coli facultative anaerobic bacterium
Cholera Vibrio cholerae Gram-negative, curved bacteria GIT
Gastroenteritis by
opportunististic
pathogens
Aeromonas hydrophila Aeromonas hydrophila Gram-negative bacteria GIT
gastroenteritis
Plesiomonas Plesiomonas shigelloides Gram-negative, rod-shaped GIT
shigelloides bacterium
gastroenteritis
GIT Gastro-intestinal tract
21
(a) (b)
Fig. 3: Staphylococcus aureus (a) cells (b) colonies on Baird Parker Agar
Toxins, Disease and Symptoms

Only certain strains of S. aureus can cause food poisoning, namely, those that produce an
enterotoxin. Enterotoxigenic strains of S. aureus produce six different enterotoxins: A, B, C, D,
E, F etc which are serologically distinct heat stable proteins of molecular weight of 26 to 30 kDa.
Staph toxins are enteric toxins and cause gastroenteritis. About 30 g or ml of food containing
toxins produced by 106 to 107 cells per gram (ml) for a normal healthy individual is sufficient to
cause the symptoms. The primary symptoms are salivation, nausea and vomiting, abdominal
cramps & diarrhea. Secondary symptoms are sweating, chills, headache and dehydration.
Identification methods
Enumeration technique in one or more selective differential media like Baird-Parker agar and
G.C. Gioletti Cantoni broth to determine the load of viable cells followed by several biochemical
tests, such as hemolysis, coagulase, thermonuclease reactions are performed to link the potential
cause of food poisoning outbreaks. Sensitive immunological tests viz., ELISA etc has been
developed for this purpose.
2) Botulism
Although the disease is very rare, the disease has a high fatality rate. Botulism is caused by the
bacterium Clostridium botulinum, which produces an exotoxin that is most potent of all known
poisons. 1 gram is sufficient to kill approximately 30 billion mice.
Biology of Clostridium botulinum

Clostridium botulinum is an anaerobic, Gram-positive, spore-forming rod that produces a potent
neurotoxin (Fig. 4). Spores of C. botulinum are widely distributed in soil, sewage, mud,
sediments of marshes, lakes and coastal waters, plants- fruits and vegetables and intestinal
contents of animals and fishes. Cells are sensitive to low pH (<4.6), lower Aw (0.93), and
moderately high salt (5.5%). The spores are heat-resistant (killed at 1150C) and can survive in
foods that are incorrectly or minimally processed. Spores do not germinate in the presence of
22
nitrate (250 ppm). Foods most commonly associated are low acid vegetables (green beans, corn,
spinach, asparagus, pepper and mushrooms) and fruits (figs and peaches) and also fermented,
improperly cooked and smoked fish, meat, poultry and fish eggs in hermatically sealed
containers.
Fig. 4: Clostridium botulinum cells

Seven types (A, B, C, D, E, F and G) of botulism are recognized, based on the antigenic
specificity of the neurotoxin produced by each strain. Types A, B, E and F cause human
botulism. Types C and D cause most cases of botulism in animals. As they are highly potent
toxins only a very small amount (1ng/kg body weight) is necessary for severe symptoms and
even death. The toxins are heat labile and can be destroyed by high and uniform heat- 950C for
15 minutes or boiling for 5 minutes.
At the initial stage (generally 12h to 36h, but can be 2h), some gastrointestinal symptoms
(nausea, vomiting, diarrhea and constipation) are evident. Neurological symptoms appear in a
short time particularly when the amount of toxin consumed is more, which includes blurred or
double vision, difficulty in swallowing, breathing and speaking, dryness of the mouth, and
paralysis of different involuntary muscles that spreads to the lung and heart. Death usually
results from respiratory failure.
The presence of C. botulinum can be determined by enumeration techniques using selective agar
media and followed by anaerobic incubation. The presence of toxins is more often tested by
immunological methods like ELISA etc.
3) Salmonella Gastroenteritis
Before 1940s, Salmonella typhi and S. paratyphi were considered the major causes of worldwide
foodborne and waterborne diseases caused by Salmonella. With the introduction of
pasteurization of milk and chlorination of water supplies, the spread of typhoid and paratyphoid
fever was greatly reduced. However, the incidence of foodborne cases of Salmonellosis is still on
the rise, which is quite puzzling. This may be attributed to various reasons: the increase in
number of antibiotic resistant Salmonella isolates, increase in number of HIV cases which are
23
more sensitive to Salmonella, the increase in number of egg-associated S. enteritidis
contamination, and food production in centralized facilities, leading to large and widespread
outbreaks incase contamination occurs.
Biology of Salmonella
Salmonella is a rod-shaped, Gram negative, non-sporulating, facultative anaerobic motile
bacterium. They are mesophiles with a growth temperature range of 5 to 460C and optimum
growth temperature of 35 to 370C. They are sensitive to low aW (<0.94) and low pH (4.5 or
below). There are over 2000 serovars of Salmonella based on flagellar, somatic and capsular
antigens, which are capable of causing Salmonellosis in humans. Salmonella are natural
inhabitants of gastrointestinal tracts of animals, birds, pets, frogs, turtle and insects. They are
also present in soil, water and sewage contaminated with fecal matter from where they can
contaminate foods directly or indirectly and can cause Salmonellosis. Foods generally
associated with outbreaks of Salmonella includes raw meats, poultry, eggs, milk and dairy
products, fish, shrimp, frog legs, yeast, coconut, sauces and salad dressing, cake mixes, cream-
filled desserts and toppings, dried gelatin, peanut butter, cocoa, and chocolate. Various
Salmonella species have long been isolated from the outside of egg shells.

Generally 105 to 106 cells need to be consumed for food borne salmonellosis but it can be as few
as 15- 20 cell in some cases. The disease starts with the penetration and passage of Salmonella
organisms from gut lumen into epithelium of small intestine where inflammation occurs; there is
evidence that an enterotoxin may be produced, perhaps within the enterocyte. S. typhi and the
paratyphoid bacteria normally cause septicemia and produce typhoid or typhoid-like fever in
humans. Other forms of salmonellosis generally produce milder symptoms which includes
nausea, vomiting, abdominal cramps, diarrhea, chills, fever, headache and prostration.
The identification & enumeration of Salmonella can be done using selective differential agar
media (Fig. 5). Although conventional culture methods require 5 days for presumptive results,
several rapid methods are available which require only 2 days. Immunological methods which
are used to detect Salmonella include ELISA, enrichment serology and Fluorescent Antibody
technique. Recently, PCR and Real Time PCR based methods employing specific base sequence
of the DNA have been developed which can detect the organism in about 5 hours e.g, Qualicons
BAX system and Gene Trak Systems.
4) Shigellosis (Bacillary Dysentery)

The genus Shigella contains four species: Shigella dysenteriae, Sh. flexneri. Sh. boydii, and Sh.
sonnei and each species have several serovars. Children below 5 years of age are most affected.
Biology of Shigella
Shigella is Gram-negative, non-motile, non-spore forming rod-shaped bacteria. The strains grow
between 7 and 460C, with an optimum at 370C. They can survive for days under refrigeration,
freezing, and 5% NaCl and pH4.5, but are sensitive to pasteurization. The organism is frequently
found in water polluted with human feces. The foods implicated in outbreaks include salads, raw
vegetables, milk and dairy products, and poultry. Contamination of these foods is usually
24
through the fecal-oral route. Fecal contaminated water and unsanitary handling by food handlers
are the most common causes of contamination.
Fig. 5: Differential media used for identification. A)

Growth of Salmonella on Blood agar; B) Growth of
Salmonella on Chromogenic Salmonella Esterase
Agar; C) Green colonies of Salmonella on Hektoen
Enteric (HE) agar; D) Bright orange colonies of
Enterobacter on HE agar; E) Bright pink of E.coli on
MacConkey agar plates; F) Growth of E. coli on
EMB agar

The strains are believed to produce a plasmid encoded invasive factor-Shiga toxin, which is an
exotoxin having enterotoxigenic property. The infective dose is very low as few as 10 cells
25
depending on age and condition of host. The symptoms include abdominal pain, cramps,
diarrhea, fever, vomiting, accompanied by blood, pus, or mucus in the stools. Infections are
associated with mucosal ulceration, rectal bleeding, drastic dehydration; fatality may be as high
as 10-15% with some strains.
Organisms are difficult to demonstrate in foods because methods are not developed or are
insensitive. A genetic probe to the virulence plasmid has been developed by FDA and is
currently under field test. However, the isolation procedures are still poor.
5) Escherichia coli enteritis

Since its discovery in 1805, E. coli was considered a harmless, Gram negative, motile, non-
sporulating; rod shaped, facultative anaerobic bacterium, a normal inhabitant of Gastro-intestinal
Tract (GIT) of humans and warm blooded animals and birds. As it is present in high number in
intestine, it has been used as an indicator organism of possible fecal contamination of enteric
pathogens in foods and water. Since in mid 1940s, evidence has accumulated that certain E. coli
strains cause diarrhea, particularly in infants, and they were then designated as pathogens. The
four groups of pathogenic E. coli are:
i) Enterotoxigenic Escherichia coli (ETEC)

Disease
Gastroenteritis/ travelers' diarrhea are the common name of the illness caused by ETEC.
Infective dose
A relatively large dose (100 million to 10 billion bacteria) of ETEC is probably necessary to
establish colonization of the small intestine, where these organisms proliferate and produce
toxins which induce fluid secretion.
Symptoms
The most frequent clinical syndrome of infection includes watery diarrhea, abdominal cramps,
low-grade fever, nausea and malaise.
Associated food
Contamination of water with human sewage may lead to contamination of foods. Infected food
handlers may also contaminate foods. These organisms are infrequently isolated from dairy
products such as semi-soft cheeses.
With the availability of a gene probe method, foods can be analyzed directly for the presence of
ETEC, and the analysis can be completed in about 3 days. Alternative methods which involve
enrichment and plating of samples for isolation of E. coli and their subsequent confirmation as
toxigenic strains by conventional toxin assays may take at least 7 days.
ii) Enteropathogenic Escherichia coli (EPEC)

Disease
Infantile diarrhea is the name of the disease usually associated with EPEC.
26
Infective dose
EPEC are highly infectious for infants and the dose is presumably very low. In the few
documented cases of adult diseases, the dose is presumably similar to other colonizers (> 106
total dose).
Symptoms
Occasionally, diarrhea in infants is prolonged, leading to dehydration, electrolyte imbalance and
death (50% mortality rates have been reported in third world countries).
Associated food
Common foods implicated in EPEC outbreaks are raw beef and chicken, although any food
exposed to fecal contamination is strongly suspect.
The isolation and identification of E. coli in foods follows standard enrichment and biochemical /
immunological procedures.
iii) Enterohemorrhagic E. coli (EHEC)

Disease
Hemorrhagic colitis is the name of the acute disease caused by E. coli O157:H7.
Infective dose
Unknown, but may be similar to that of Shigella spp. (as few as 10 organisms).
Symptoms
The illness is characterized by severe cramping (abdominal pain) and diarrhea which is initially
watery but becomes grossly bloody. Occasionally vomiting occurs. Fever is either low-grade or
absent.
Associated food
Undercooked or raw hamburger (ground beef) has been implicated in many of the documented
outbreaks, however E. coli O157:H7 outbreaks have implicated unpasteurized fruit juices, dry-
cured salami, lettuce, game meat, and cheese curds.
Several microbiological methods can be used to isolate E. coli O157:H7 from foods. Sorbitol-
MacConkey agar has been used extensively to isolate this organism from clinical specimens.
Hemorrhagic colitis agar, a selective and differential medium, is used in a direct plating method
to isolate O157:H7 from foods. Rapid methods using a variety of technologies, including
recombinant DNA methods, are being developed.
iv) Enteroinvasive Escherichia coli (EIEC)

Disease
Enteroinvasive E. coli (EIEC) may produce an illness known as bacillary dysentery. Following
the ingestion of EIEC, the organisms invade the epithelial cells of the intestine, resulting in a
mild form of dysentery, often mistaken for dysentery caused by Shigella species.
27
Infective dose
The infectious dose of EIEC is thought to be as few as 10 organisms (same as Shigella).
Symptoms
The illness is characterized by the appearance of blood and mucus in the stools of infected
individuals, abdominal cramps, diarrhea, vomiting, fever, chills, and a generalized malaise.
Associated food
It is currently unknown what foods may harbor EIEC, but any food contaminated with human
feces from an ill individual, either directly or via contaminated water, could cause disease in
others.
Foods are examined as are stool cultures. Detection of this organism in foods is extremely
difficult because undetectable levels may cause illness.
6) Bacillus cereus Gastroenteritis

The causal organism is a bacterium Bacillus cereus, which is a Gram-positive, facultative
aerobic spore former whose cells are large rods and whose spores do not swell the sporangium
situated centrally or sub-terminally. A wide variety of foods including meats, milk, vegetables,
and fish have been associated with the diarrheal type food poisoning. The vomiting-type
outbreaks have generally been associated with rice products; however, other starchy foods such
as potato, pasta and cheese products have also been implicated.

The presence of large numbers of B. cereus (> 106 organisms/g) in a food is indicative of active
growth and proliferation of the organism and is consistent with a potential hazard to health. B.
cereus food poisoning is the general description, although two recognized types of illness are
caused by two distinct metabolites. The diarrheal type of illness is caused by a large molecular
weight protein, while the vomiting (emetic) type of illness is believed to be caused by a low
molecular weight, heat-stable peptide. The symptoms of B. cereus diarrheal type food poisoning
are the onset of watery diarrhea, abdominal cramps, and pain after 6-15 hours of consumption of
contaminated food. Nausea may accompany diarrhea, but vomiting (emesis) rarely occurs. The
emetic type of food poisoning is characterized by nausea and vomiting within 0.5 to 6 h after
consumption of contaminated foods. Occasionally, abdominal cramps and/or diarrhea may also
occur.
B. cereus can be enumerated by surface plating on a mannitol, egg yolk agar medium with
polymyxin B as the selective medium. Colonies surrounded by precipitation resulting from
lecithinase are indicative of B. cereus.
7) Yersinia enterocolitica Gastroenteritis

Foodborne yersiniosis was first confirmed in USA in 1976 following an outbreak involving large
number of school children upon consumption of chocolate milk contaminated with Yersinia
enterocolitica. In Denmark, food borne yersiniosis is one of the most common forms of
Gastroenteritis.
28
Biology of Yersinia enterocolitica
Y. enterocolitica is a psychrotrophic small rod-shaped, non spore forming, motile, facultative
anaerobic gram-negative bacterium. Strains of Y. enterocolitica can be found in meats (pork,
beef, lamb, etc.), oysters, fish, and raw milk. The strains can grow between 0 and 440C
temperature, 5% NaCl and at a pH above 4.6.

Yersiniosis is the disease caused by Y. enterocolitica. Young children are more succeptible to
food borne Yersiniosis. Yersinia infections mimic appendicitis, but the bacteria may also cause
infections of other sites such as wounds, joints and the urinary tract. Infective dose is unknown.
Illness onset is usually between 24 and 48 hours after ingestion and is frequently characterized
by symptoms such as gastroenteritis with diarrhea and/or vomiting; however, fever and
abdominal pain are the hallmark symptoms.
The isolation method is relatively easy to perform, but in some instances, cold enrichment may
be required. Y. enterocolitica can be presumptively identified in 36-48 hours. However,
confirmation may take 14-21 days or more. Determination of pathogenicity is more complex.
8) Listeriosis by Listeria monocytogenes

Human listeriosis, caused by Listeria monocytogenes has been recognized for long time. The
species has many serovars, namely, 1/2a, 1/2b, 1/2c, 3a, 3b, 3c and 4b. This is a Gram-positive,
psychrotrophic, facultative, non-sporulating, motile small rod. L. monocytogenes is quite hardy
and resists the deleterious effects of freezing, drying, and heat remarkably well for a bacterium
that does not form spores. L. monocytogenes has been associated with such foods as raw milk,
supposedly pasteurized fluid milk, cheeses (particularly soft-ripened varieties), ice cream, raw
vegetables, fermented raw-meat sausages, raw and cooked poultry, raw meats (all types), and
raw and smoked fish. Its ability to grow at temperatures as low as 3C permits multiplication in
refrigerated foods.

Listeriosis is the name of the general group of disorders caused by L. monocytogenes. The
infective dose of L. monocytogenes is unknown but is believed to vary with the strain and
susceptibility of the victim. The sensitive group includes pregnant women, unborn fetuses,
infants, elderly people and immuno-compromised people. The virulence factor identified is a
specific type of hemolysin, listeriolysin O which is produced during active growth. The
manifestations of listeriosis include septicemia, meningitis (or meningoencephalitis),
encephalitis, and intrauterine or cervical infections in pregnant women, which may result in
spontaneous abortion (2nd/3rd trimester) or stillbirth. The onset of the aforementioned disorders
is usually preceded by influenza-like symptoms including persistent fever. It was reported that
gastrointestinal symptoms such as nausea, vomiting, and diarrhea may precede more serious
forms of listeriosis or may be the only symptoms expressed.
The methods for analysis of food are complex and time consuming. The present FDA method
requires 24 and 48 hours of enrichment, followed by biochemical or immunological tests. Total
time to identification is from 5 to 7 days, but the use of specific non-radiolabled DNA probes
29
involving listeriolysin O gene have led to a simpler and faster confirmation of suspect isolates
e.g., BAX system.
9) Campylobacter Enteritidis/ Campylobacteriosis

Campylobacteriosis caused by C. jejuni was first recognized as the cause of an outbreak in 1979.
It is also often known as campylobacter enteritis or gastroenteritis. It is caused by several species
of Campylobacter, however Campylobacter jejuni and Campylobacter coli are more common.
Campylobacter jejuni is a Gram-negative slender, curved, and motile rod. It is a microaerophilic
organism, which means it has a requirement for reduced levels of oxygen. It is relatively fragile,
and sensitive to environmental stresses (e.g., 21% oxygen, drying, heating, disinfectants, acidic
conditions). C. jejuni frequently contaminates raw chicken. Raw milk is also a source of
infections. The bacteria are often carried by healthy cattle and by flies on farms. Non-chlorinated
water may also be a source of infections. However, properly cooking chicken, pasteurizing milk,
and chlorinating drinking water will kill the bacteria. It is considered as one of the most frequent
cause of food infection next to salmonella.

C. jejuni produces thermolabile enterotoxins that cross reacts with cholera toxin. The infective
dose of C. jejuni is about 400-500 bacteria. C. jejuni infection causes diarrhea, which may be
watery or sticky and can contain blood (usually occult) and fecal leukocytes (white cells). Other
symptoms often present are fever, abdominal pain, nausea, headache and muscular pain.
The identification methods require an enrichment broth containing antibiotics, special antibiotic-
containing plates and a microaerophilic atmosphere generally a microaerophilic atmosphere with
5% oxygen and an elevated concentration of carbon dioxide (10%). Isolation can take several
days to a week.
10) Vibrio species

Two species of Vibrio which are of prime concern and are emerging as food borne pathogens
are:
A. Vibrio parahemolyticus Gastroenteritis

Gastroenteritis caused by Vibrio parahemolyticus is quite common in Japan and accounts for 40
to 70% for the total foodborne poisonings. The cells are Gram-negative, non-sporulating motile
curved rods with an optimum temperature of 30 to 370C, but can grow over a temperature range
of 5 and 420C. The cells can grow quickly in a salt concentration of 3 to 5% NaCl but are
sensitive to 10% salt. This bacterium is frequently isolated from the estuarine and marine
environment of the United States. Both pathogenic and non-pathogenic forms of the organism
can be isolated from marine and estuarine environments and from fish and shellfish dwelling in
these environments. Infections with this organism have been associated with the consumption of
raw, improperly cooked, or cooked, recontaminated fish and shellfish. Improper refrigeration of
seafood contaminated with this organism will allow its proliferation, which increases the
possibility of infection.

V. parahemolyticus associated gastroenteritis is the name of the infection caused by this
organism. The pathogenic strains are capable of producing a heat-stable hemolysin factor and are
30
designated as Kangawa positive. Disease is caused when the organism attaches itself to an
individuals' small intestine and excretes an heat stable hemolysin factor. A total dose of greater
than one million organisms may cause disease. Diarrhea, abdominal cramps, nausea, vomiting,
headache, fever, and chills may be associated with infections caused by this organism. The
illness is usually mild or moderate, although some cases may require hospitalization.
B. Vibrio vulnificus Septicemia

Vibrio vulnificus, a lactose-fermenting, halophilic, gram-negative, opportunistic pathogen, is
found in estuarine environments and associated with various marine species such as plankton,
shellfish (oysters, clams, and crabs), and finfish. Consumption of these products raw or
recontaminated may result in illness.

This organism causes wound infections, gastroenteritis, or a syndrome known as "primary
septicemia". The infective dose for gastrointestinal symptoms in healthy individuals is unknown
but for predisposed persons, septicemia can presumably occur with doses of less than 100 total
organisms. The ingestion of V. vulnificus by healthy individuals can result in gastroenteritis. The
"primary septicemia" form of the disease follows consumption of raw seafood containing the
organism by individuals with underlying chronic disease, particularly liver disease. It may also
cause distinctive bulbous skin lesions.
General Control Measures for Prevention of Food Borne Diseases

a) By employing proper sanitary measures.
b) By the use of chemical agents in preventing the growth of microorganisms.
c) Removing left over food promptly from work surfaces and utensils in food preparation area.
d) By cooking or applying proper and desired processing treatment to the food before
consumption.
e) By avoiding chances of re-contamination of food, hence storing it in proper package.
f) Maintaining good personal hygiene, like food handlers should not have any open cuts and
wounds.
g) Maintaining proper sanitation and preventing contamination of water to be used.
h) Use of proper storage condition restricting recontamination and growth.
Microbial Testing of Foods

The examination of foods for the presence of microorganisms is one of the important areas of
food microbiology. Number of bacteria in foods is an indicator of their handling, processing and
ultimately quality. The various types of methods used can be grouped broadly into two classes:
Conventional methods and Rapid methods. The conventional methods include cultural and
microscopic methods, physical methods, chemical methods and the immunological methods,
while the rapid methods includes the use of DNA based methods.
Conventional Methods
a) Cultural and microscopic methods
The four basic type of methods included in this category are:
31
Standard Plate Count (SPC)
SPC is useful in determining the viable number of microorganisms in foods. The procedure
consists of diluting the organisms in a series of sterile dilution blanks. From blanks, measured
amounts of diluted organism are transferred by spread plating/ pour plating over the appropriate
agar plates and incubated for 24-48 h. Thereafter plates are examined and number of colonies is
counted to calculate the number of viable cells or colony forming units per unit volume of
material under test. The counts obtained in this method depend on some factors: nature of food
flora and material, plating medium used, pH, aW and Eh of the medium, type of diluents and
temperature of incubation. The disadvantages of the method are that the technique is
cumbersome, material intensive and time consuming.
Most Probable Number (MPN)

The method was introduced by McCrady in 1915. This is a qualitative method for determination
of the presence of coliforms in potable water. The selective medium used is MacConkeys
medium which contains a bile salt inhibitory for growth of non-intestinal lactose fermenting
bacteria. Since the method is statistical in nature, MPN results are generally higher than SPC.
The test can be performed in two formats- three tube and five tube method. The advantages of
the method are as follows:
1. it is a simple technique;
2. good agreement between results from different laboratories;
3. identification of specific microbial group is possible by the use of appropriate selective
and differential medium.
Among the disadvantages is the requirement for large number of glass wares and lack of
precision.
Dye reduction Method (MBRT)

Dye reduction test involve the use of redox dyes like methylene blue to determine the quality of
milk. Methylene blue is reduced and loses its color in the presence of actively growing bacteria.
The time taken for the reduction of methylene blue is inversely proportional to the number of
viable bacteria. The shorter the methylene blue reduction time poorer is the quality of the milk.
The advantages of the method are as follows:
1. It is a simple and rapid method for grading bulk supplies of raw milk;
2. It is an inexpensive method;
3. No skilled personnel are needed to perform the test.
Disadvantages of the test are it does not indicate the type and source of organism and variations
in the degree of bacterial metabolism.
Direct Microscopic count (DMC)

Another quick and precise method for determination of microorganisms in liquid foods is the use
of haemocytometer or Neubauer counting chamber. The method is quick and requires
expertisation. In the method appropriately diluted samples are transferred on the haemocytometer
using a Pasteur pipette and counted directly under the microscope. The haemocytometer is itched
with a grid system into number of squares (25 large squares). The number of microorganisms
present in the large square are counted and multiplied with the factor for large square and
32
dilution factor to determine the total number of microorganisms in the sample. Among the
advantages of DMC are: it is rapid and simple and cell morphology can be assessed. Among its
disadvantages are: it is microscopic method and therefore fatiguing to the analyst; both viable
and nonviable cells are enumerated; food particles interfere with the microbial counts; and DMC
counts are invariably higher than counts by SPC.
b) Physical Methods
Impedance
Impedance is the apparent resistance in an electric circuit to the flow of alternating current
corresponding to the actual electrical resistance to a direct current. When microorganisms grow
in culture media, they metabolize substrates of low conductivity into products of higher
conductivity and thus decrease the impedance of the media. When the impedance of broth
cultures is measured, the curves are reproducible for species and strains, and mixed cultures can
be identified by use of specific growth inhibitors. The technique is capable of detecting as low as
ten to one hundred cells. Cell populations of 105-106/ml can be detected in 3-5 h; and 104-105/ml
in 5-7 h. The times noted are required for the organisms to attain a threshold of 106-107 cells/ml.
Impedance has been widely used to monitor the overall microbial quality of various foods like
pureed vegetables, cream pies, raw milk, ground meat, and other foods. Also, it is a rapid method
to detect coliforms and fecal coliforms in meats. The method can also be used to predict shelf life
of pasteurized milk and detection of spoilage organisms in beer fermentation. Yeasts growing in
wort caused an increase in impedance while bacteria caused a decrease. Impedance can be used
to classify frozen orange juice concentrate as acceptable or unacceptable and has been employed
to detect starter culture failure within 2h. In general, impedance methods measure changes with
the conductance of the growth medium. Conductance generally increases from 10 to 100%
during growth, apparently from the increase in ion pairs as a result of metabolic activity.
Microcalorimetry
Microcalorimetry is the measurement of small heat changes involved in the breakdown of
growth substrates. The measured heat production is closely related to the cells catabolic
activities. There are two types of calorimeters batch and flow. One of the most commonly used
microcalorimeters is the Calvet instrument, which is sensitive to a heat flow of 0.01 cal/h from a
10-ml sample.
It is a rapid method for identification and characterization of food-borne organisms, but results
vary according to the history of the organism, inoculum size and fermentable substrates.
Microcalorimetry has been used to the study of spoilage in canned foods, to differentiate
between the Enterobacteriaceae, to detect the presence of Staphylococcus aureus, and to estimate
bacteria in ground meat.
Flow cytometry
Flow cytometry is the science of measuring components and the properties such as fluorescence,
absorbance and light scatter of individual cells in liquid suspension. In this method, suspended
cells are brought one by one to a detector by means of a flow channel using cell sorters. Fluidic
devices under laminar flow define the trajectories and velocities that cells traverse the detector
and measure the cell properties. Flow cytometers and cell sorters make use of one or more
33
excitation sources such as argon, krypton, or helium-neon ion lasers, and one or two fluorescent
dyes to measure and characterize several thousand cells/sec.
The application of flow cytometry in the analysis of foods for their microbial content was
suggested by Van Dilla et al.,1983 in which bacteria were stained with fluorescent dyes one of
which bound preferentially to DNA rich in guanine-cytosine while the other bound to adenine-
thymine rich DNA. Thus, the rapid identification of bacteria in food based upon their specific A-
T/G-C ratios is possible. The method can also be used to distinguish between living and dead
cells by dual staining; to determine the ploidy of yeast cells; to differentiate between spores and
vegetative cells in Bacillus spp; and to separate pathogenic and non-pathogenic amoebae.
c) Chemical methods
Thermostable nuclease
This method can be used to detect the presence of S. aureus in foods. This is possible because of
the high correlation (95%) between the production of coagulase and thermostable nuclease by
enterotoxin producing S. aureus strains. The method is a spectrophotometric method and the
amount of extractable thermostable nuclease increases with the numbers of cells in foods. The
advantages of testing for heat stable nuclease as an indicator of S. aureus growth and activity
includes:
1. because of its heat stable nature, the enzyme will persist even if the bacterial cells are
destroyed by heat, chemicals, or bacteriophage, or if they are induced to L-forms;
2. the heat-stable nuclease can be detected faster than enterotoxin (about 3 h versus several
days),
3. the nuclease appears to be produced by enterotoxigenic cells before enterotoxins appear;
4. the nuclease is detectable in unconcentrated cultures of food specimen while enterotoxin
detection requires concentrated samples; and
5. the nuclease of concern is stable to heat as are the enterotoxins.
There is high correlation between coagulase positive enterotoxigenic strain and thermostable
nuclease producing strain.
Limulus lysate for endotoxins

Gram negative bacteria are characterized by their production of endotoxins which consists of
LPS layer of the cell envelope. The Limulus amoebocyte lysate (LAL) test employs a lysate
protein obtained from the blood cells of the horseshoe crab. The lysate protein is the most
sensitive substance known for endotoxins (3-300 times more sensitive to endotoxins than the
U.S. Pharmacopeia rabbit pyrogen test). The LAL test is performed by adding aliquots of food
suspensions or other test materials to small quantities of a lysate preparation followed by
incubation at 37C for 1 h. The presence of endotoxins caused gel formation of the lysate
material.
The LAL test has been found to be suitable for the rapid evaluation of the hygienic quality of
milk relative to the detection of coliforms before and after pasteurization. Since both viable and
nonviable gram-negative bacteria are detected by LAL, simultaneous plating is necessary to
determine the numbers of cfus. The method has been applied successfully to detect the
34
microbial spoilage of ground beef; to monitor milk and milk products; microbial quality of raw
fish; and cooked turkey rolls.
ATP Measurement
Adenosine-triphosphate (ATP) is the primary source of energy in all living organisms. It
disappears within 2 h after cell death and the amount per cell is generally constant, with values
around 4 x 104 M ATP/105 cfu of bacteria. One of the simplest ways to measure ATP is by use
of the firefly luciferin-luciferase system. In the presence of ATP, luciferase emits light, which is
measured with a liquid scintillation spectrometer / luminometer. The amount of light produced
by firefly luciferase is directly proportional to the amount of ATP added.
This is a rapid method for assessing biomass in activated sludge and estimation of
microorganisms in foods. The major problem that has to be overcome for food use is the removal
of nonmicrobial ATP and other problems like one yeast strain was found to contain 300 times
more ATP than the average for bacterial cells.
Radiometry
This method is based upon the incorporation of a 14C-labeled metabolite in a growth medium
(14C formate, 14C glucose, 14C glutamate) so that when the organisms utilize this metabolite,
14
CO2 is released and measured by use of a radioactivity counter. In this method, 10ml of
medium containing labeled metabolite in a serum vial is inoculated with suspected sample.
Following incubation, the headspace is tested periodically for the presence of 14CO2. The time
required to detect the labeled CO2is inversely related to the number of organisms in a product.
This method can be used for detection of coliforms in water and sewage; for detection of S.
aureus, S. typhimurium, and spores of Clostridium botulinum in beefs; for detection of organisms
in frozen orange juice concentrate.
Glucuronidase assay for E. coli

The enzyme -glucuronidase (GUD) is produced by 97% of E.coli strains and upto 50% of
salmonellae and shigellae. In the presence of the substrate 4-methylumberlliferone--D-
glucuronide (MUG), GUD produces a fluorogenic end product which is visible in UV light.
Thus, it is a rapid and more efficient way to detect E.coli in foods; one E.coli cell could be
detected in 20 h. While most positive reactions occurred in 4 h, some weak GUD-positive strains
required up to 16 h for reaction. The main advantage of this method is that fluorescence appears
before gas production from lactose. Also, some salmonellae and shigellae are GUD positive does
not invalidate the method since these organisms are of greater significance in foods than
coliforms.
d) Immunological Methods
Fluorescent antibody
In this technique, an antibody to a given antigen is made fluorescent by coupling it to a
fluorescent compound such as rhodamine b, fluorescein isocyanate, and fluorescein
35
isothiocyanate, and when the antibody reacts with its antigen, the antigen-antibody complex
emits fluorescence that can be detected using fluorescent microscope. The application of FA to
the examination of foods for detection of salmonellae is made after cultural enrichment
procedures have been carried out. The technique can be used to detect salmonellae in milk and
large number of different types of foods and related products. The procedure has been used also
to monitor food-processing plant, utensils and equipments.
In addition to salmonellae, FA can be used to identify clostridia including C. perfringens and C.

botulinum. The advantages of this method includes: (1) FA is more sensitive and rapid method
(18-24h) than cultural methods; (2) reduction in time for negative tests on food products makes
it possible to free foods earlier for distribution (3) larger numbers of samples can be analyzed,
making for increased sampling of food products; and (4) the qualitative determination of specific
salmonellae serotypes is possible for FA if desired for epidemiologic reason.
Enrichment serology
Enrichment serology is a more rapid method for identification and isolation of salmonellae from
foods than the conventional cultural methods. It is carried out in four steps : (1) pre-enrichment
in a nonselective medium for 18h; (2) selective enrichment in selenite-cystine and/or
tetrathionate broth for 24h; (3) selective enrichment in M broth for either 6-8 h ; and (4)
agglutination with polyvalent H antisera at 50C for 1 h. Results can be obtained in 50 h
compared to 96-120 h by CCM for dried foods and feeds. ES results are comparable with FA.
Possible disadvantage to its use is the cells/ml and its lack of response to nonmotile salmonellae.
Radioimmunoassay (RIA)
This technique consists of adding a radioactive label to an antigen, allowing the labeled antigen
to react with its specific antibody, and measuring the amount of antigen that combined with the
antibody by use of a radioactivity counter. In solid-phase RIA, antibody molecules are
immobilized on the solid surfaces like polypropylene, polystyrene, bromacetylcellulose etc. The
antibody-coated polymers bind specifically with radioactive tracer antigens. Upon washing, the
free-labeled antigen is washed out, and the radioactivity measurements are quantitative. The
label used commonly is 125I.
RIA can be used for determination of S. aureus enterotoxin B and the test was quantitatively
reliable at an enterotoxin level of 0.01 g/ml. A RIA method has also been developed for E. coli
ST that detected 50 to 500 pg toxin/tube. The RIA technique lends itself to the examination of
foods for other biological hazards such as endotoxins, paralytic shellfish toxins, and the
mycotoxins like Ochratoxin A and Aflatoxin M1 (AFM1).
ELISA
The enzyme-linked immunosorbent assay (ELISA, enzyme immunoassay, or EIA) is an
immunological method similar to RIA but employs an enzyme coupled to antigen or antibody
rather than a radioactive isotope. A typical ELISA is performed with antiserum. Following
incubation and washing, an enzyme-labeled preparation of anti-immunoglobulin is added. After
gentle washing, the enzyme remaining in the tube or microtiter well is assayed to determine the
amount of specific antibodies in the initial serum. A commonly used enzyme is horseradish
peroxidase or alkaline phosphatase, and its presence is measured by the addition of peroxidase
36
substrate- OPD. Variations of this basic ELISA consist of a sandwich ELISA in which the
antigen is required to have at least two binding sites. Among the applications of the ELISA
technique in food microbiology is its use to detect Staphylococcal enterotoxins, botulinal toxins,
salmonellae, shigellae, mycotoxins, viruses, toxoplasma antibodies, and antibodies to gram-
negative endotoxins.
Rapid Detection of Emerging High Risk Pathogens in Foods

Recent advances in biotechnology have considerably simplified microbiological procedures for
detection of pathogens and have reduced the assay time. Table 14 shows the comparison between
the conventional versus recent methods for detection of microbial pathogens in foods. These
assay procedures include use of DNA probes and PCR based tests.
Table 14: Conventional versus recent methods for detection of microbial pathogens in foods
Conventional methods Cultivation and characterization of organism in laboratory,

For pathogenDetection of host immune response (e.g., antibodies) to known
identification organism. Visual detection of "typical" microbial form in host.
Problems withCultivation-based methods insensitive for detecting some organisms.
conventional methods Conventional methods limited to pathogens with known growth
requirements.
Poor discrimination between microbes with common behavioural
features.
Temperature of incubation used not conducive for all types of
organisms.
Visual appearance of micro organisms is non-specific.
Examples of failures Detection of slow-growing organisms takes weeks.
with conventional A number of viable micro organisms cannot be cultivated
approaches A single media not sufficient to support all types of microbes.
New molecular Use of genetic (DNA or RNA) sequences to identify micro
methods organisms plus DNA amplification procedures (e.g., polymerase
chain reaction, PCR) leads to development of specific and consensus
PCR methods. Other experimental sequence-based molecular
methods for detection of novel microorganisms (e.g., "representation
difference analysis").
Advantages Rapid, specific & sensitive.
Future applications Rapid, automated identification of known microbial pathogens on
routine basis. More rapid and sensitive detection and identification
of emerging, novel microbial pathogens
DNA probe based detection systems

A DNA probe is a short (14-40 bases) single-stranded sequence of nucleotide bases that will bind
to specific regions of single-stranded target DNA sequences; the homology between the target
and the DNA probe results in stable hybridization. Hybridization is monitored by labelling
probes, by attachment to or incorporation into the probe, with compounds that can be detected
visually or chemically. Isotopes such as 32P can be incorporated into the structure of the probe.
37
Enzymes such as alkaline phosphatase or horseradish peroxidase (HRP) are often linked to the
probe via a chemical linkage; hybridization can be detected visually following addition of
substrates. Fluorescently labelled compounds such as fluorescein isothiocyanate can also be
attached directly to probes. Some of the examples of DNA probes used for the detection of food
borne pathogens are provided in Table 15.
Table 15: DNA probes for food borne pathogens
Food borne pathogen Component detected Labelling system

Salmonella spp. Chromosomal DNA fragment Isotopic
23S rRNA FITC/HRP
Listeria spp. Listeriolysin O gene Isotopic 32P
16S rRNA (species specific) FITC/HRP
Listeria monocytogenes Plasmids Hydrophobic grid membrane filter
Escherichia coli 16S rRNA FITC/HRP
Heat-labile toxin(LT) gene Isotopic 32P
Shiga-like toxin Isotopic 32P
-glucuronidase (GUD) gene MUG
Yersinia enterocolitica rRNA FITC/HRP
Vibrio vulnificus Hemolysin Colony blot
Campylobacter spp. rRNA FITC/HRP
Staphylococcus aureus Enterotoxins A,B.C1,&E FITC/HRP
Shigella spp. Virulence plasmids Isotopic 32P/ Colony blot
PCR- based detection of food pathogens

Polymerase Chain Reaction (PCR) has recently emerged as the most powerful molecular
technique in the area of diagnostics. It is now being increasingly used for monitoring of foods for
potential food pathogens, so that the safety of these foods could be ensured from public health
point of view. Using PCR, the target DNA sequence can be selectively amplified, thus increasing
the amount of target available for detection. The PCR technique is based on the reiteration of
three-step process : denaturation of dsDNA into single strands, annealing extension primers
homologous to the target DNA sequence to be amplified to the single stranded DNA, and
enzymatic extension of primers using a thermostable enzyme such as Taq DNA polymerase, as
illustrated in Fig. 6. A typical amplification is 20-40 cycles and results in million fold
amplification of the original target DNA. The DNA from the single cell would be detectable
following PCR amplification. Application of such methods in Food Quality Assurance and
Public Health Labs can go a long way in protecting the health of the public. The crucial feature
of sample preparation in the direct analysis of food without cultural enrichment is the isolation of
target DNA with high reproducibility and efficiency. Construction of the actual PCR assay
requires nucleotide sequence information and knowledge about the chosen target gene to
guarantee maximum specificity and sensitivity. By using different formats of PCR, it is now
possible to simultaneously detect more than one food pathogen in the food. PCR-based detection
of food pathogens has completely revolutionized the area of diagnostics as the results are
available in less than 24 h to enable the food processing units to take appropriate follow up
action if a pathogen is detected in a food to avoid any risk to the consumers.
38
Fig. 6: DNA amplification using polymerase chain reaction
Nucleic acid based assays are supposed to the exquisitively sensitive and reliable as the genome
of the organism is responsible for the expression of biochemical or serological characteristics of
the target organisms. Rapid test kits which rely on the interaction of nucleic acid probes with the
conserved or marker sequence of target nucleic acids have been developed, some examples of
which are indicated in Table 16. Virulence associated genes are commonly targeted for the
detection of pathogens in foods. Two types of nucleic acid probe-based tests (colorimetric and
chemiluminescent) are available for Salmonella, E. coli, Yersinia enterocolitica and Listeria.
Real-Time Vs Traditional PCR

Real-Time chemistries allow for the detection of PCR amplification during the early phases of
the reaction. Measuring the kinetics of the reaction in the early phases of PCR provides a distinct
advantage over traditional PCR detection. Traditional methods use agarose gels for detection of
PCR amplification at the final phase or end-point of the PCR reaction (Fig. 7)
Limitations of End-Point PCR

Agarose gel results are obtained from the end point of the reaction. Endpoint detection is very
time consuming. Results may not be obtained for days. Results are based on size discrimination,
which may not be very precise. As seen later in the section, the end point is variable from sample
to sample. While gels may not be able to resolve these variabilities in yield, real-time PCR is
sensitive enough to detect these changes. Agarose Gel resolution is very poor, about 10 fold.
Real-Time PCR can detect as little as a two-fold change. Some of the problems with End-Point
Detection: Poor Precision, low sensitivity, short dynamic range < 2 logs, low resolution, non
39
automated, size-based discrimination only, results are not expressed as numbers, ethidium
bromide for staining is not very quantitative and requirement for post PCR processing.
Table 16: AOAC approved rapid microbial test kits
Test Kit Name Manufacturer Analytes

Reveal Neogen Corporation Salmonella spp.
GENE-TRAK
Salmonella DLP Assay Salmonella spp.
Systems
BioControl Systems,
BIND Salmonella Rapid Assay Kit Salmonella spp.
Inc.
BAX for Screening Salmonella Qualicon Salmonella spp.
EiaFoss Salmonella Foss Electric A/S Salmonella spp.
GENE-TRAK Listeria
Listeria DLP Assay
Systems monocytogenes.
Listeria
VIDAS Listeria Assay bioMerieux
monocytogenes.
BAX for Screening E.coli O157:H7 Qualicon E.coli O157:H7
Detex System MC-18 E. coli O157: Molecular Circuitry E.coli O157 including
H7 Inc. H7
Listeria
EiaFoss Listeria ELISA Kit Foss Electric A/S
monocytogenes.
BAX for Screening/Listeria Listeria
Qualicon
monocytogenes monocytogenes.
TaqMan Salmonella Perkin-Elmer Salmonella
Colorimetric Gene Trak assay GeneTrak systems E.coli, Salmonella
1 2 3 4
DNA/ RNA DNA Gel Southern
Extraction Amplification Electrophoresis Blotting
Fig. 7: Conventional PCR- Based testing formats
40
Real-Time PCR Applications
Real-Time PCR can be applied to traditional PCR applications as well as new applications that
would have been less effective with traditional PCR. With the ability to collect data in the
exponential growth phase, the power of PCR has been expanded into applications such as: viral
quantitation, quantitation of gene expression, array verification, drug therapy efficacy, DNA
Damage measurement, quality control and assay validation, pathogen detection and genotyping.
The most popular real-time PCR based system used in food authentication is the Qualicons
BAX detection system, which is a fast and accurate test for screening food and environmental
samples for pathogens e.g, E. coli O157:H7, Listeria monocytogenes, Enterobacter sakazakii,
Salmonella, Campylobacter coli etc (Fig. 8).
Fig. 8: Qualicons BAX system
Advantages of using Real-Time PCR

a) Traditional PCR is measured at End-Point (plateau), while Real-Time PCR collects data
in the exponential growth phase
b) An increase in reporter fluorescent signal is directly proportional to the number of
amplicons generated
c) The cleaved probe provides a permanent record amplification of an Amplicon
d) Increase dynamic range of detection
e) No-post PCR processing
f) Detection is capable down to a 2-fold change
Conclusions
A variety of DNA-based methods are available for use in food authentication which varies in
their complexity and cost. Both these factors influence the uptake of such tests by food control
laboratories. With increasing regulation of food products, in response to consumer concern, food
industry must have strong network of efficient quality assurance programme to monitor the
quality and safety of foods before reaching the consumers. This can be possible with the
application of recent development in DNA based methods in quality assurance programmes for
detecting and identifying microbial pathogens. The sooner the food industry adopts and
41
implements these biotechnological methods, the better for it to make its presence felt both in
national and international market.
Suggested Readings
1. MR Adams and MO Moss. 2000. Food Microbiology. New Age International (P) Ltd, Publshers.
2. James M Jay. 2005. Modern Food Microbiology. IVth Edition. CBS publishers and Distributors, New Delhi.
3. WC Frazier & DC Westhoff. 2006. Food Microbiology. IVth edition. Tata McGraw Hill Publishing Co. Ltd,
New Delhi.
4. Bibek Ray. 2000. Fundamental Food Microbiology. CRC Press, New York.
5. H. Michael Wehr, Joseph F. Frank.2004. APHA Standard Methods for the Examination of Dairy
6. Products. 17th Edition. American Public Health Association.
7. F. P. Downes, Keith Ito. 2001. Compendium of Methods for the Microbiological
8. Examination of Foods. IVth Edition. American Public Health Association.
42

Food Spoilage PDF

Uploaded by

Copyright:

Available Formats

Food Spoilage PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Food Spoilage PDF

Uploaded by

Copyright:

Available Formats

What are some examples of how microorganisms can affect food quality?

What are some examples of how microorganisms can affect food quality?

How can microorganisms be used to transform raw foods?

How can microorganisms be used to transform raw foods?

FOOD AND INDUSTRIAL MICROBIOLOGY

Food spoilage, food infections and intoxications caused by microorganisms and

History of microorganisms in food

Food Spoilage and General Principles Underlying Spoilage of Food

Table 1: Primary sources of microorganisms found in foods

Table 2: Factors affecting the development of microorganisms in foods

Intrinsic Factors Extrinsic factors Implicit factors Processing factors

Water Activity (aW) = ERH / 100

Dried or Low Moisture Foods

Table 3: Minimum water activity values of spoilage microorganisms

Microbial group Minimum aw Examples

Table 4: Water activity of some foods and susceptibility to spoilage by microorganisms

Water activity Microorganisms grow at this aw Food examples

0.30 No microbial proliferation Cookies, biscuits crackers, bread crusts etc.

pH and Buffering capacity

Table 5: Approximate pH ranges of different microbial groups

Minimum Optimum Maximum

Table 6: Approximate pH ranges of some common food commodities

Redox Potential (Eh)

Table 8: Redox potential of some foods

Antimicrobial constituents and barriers

Relative Humidity of the storage environment

Microbial Spoilage of Foods

Table 9: Types of food spoilage with some examples of casual organisms

Food Types of Spoilage Microorganisms involved

Spoilage of fresh and ready-to-eat meat products

Table 10: Different types of spoilage of meats

Aerobic or Defect Microorganisms involved

Ready-to-Eat Meat Products

Ultrahigh temperature-treated milk (150C for a few seconds) is an essentially commercially

Spoilage of fruits and vegetables

Table 11: Common spoilage defects of fruits and vegetables

Defect Casual organism

Fermented Vegetable and Fruit Products

Spoilage of canned foods

1. Flat Sour Spoilage

2. Thermophilic Anaerobe (TA) Spoilage

3. Sulfide Stinker Spoilage

Spoilage Due to Insufficient Heating

Spoilage Due to Container Leakage

Major Food Borne Infections/ Intoxications Caused by Bacteria

Table 12: Possible causes of food borne gastro intestinal disorders

Types of Microbial Food Borne Diseases

Algal toxins Mycotoxins Bacterial toxins Enteric viruses

Fig. 2: Classification of food borne diseases

A detailed account of major bacterial pathogens is as follows:

1) Staphylococcal Food Poisoning

Biology of Staphylococcus aureus

Toxins, Disease and Symptoms

Biology of Clostridium botulinum

Fig. 4: Clostridium botulinum cells

Toxins, Disease and Symptoms

Toxins, Disease and Symptoms

4) Shigellosis (Bacillary Dysentery)

Fig. 5: Differential media used for identification. A)