EXCELLENCE IN ELECTRIC

GENERATORS
T H R E E PH A SE SY NCHRONOUS G ENERATORS

CONTACT :: [email protected] :: www.norwegianelectric.com :: Phone: +47 55 61 30 00

THREE PHASE SYNCHRONOUS GENERATORS
Norwegian Electric Systems offers a complete range of low
and medium voltage three-phase synchronous generators
for Marine and other applications. The generators are
designed to offer not only the best possible reliability, but
also the best technical solution with regards to electrical
quality in a marine system.

Reliability
Long life endurance of electrical components and housing.
Generators are impregnated with high-grade resin by a VPI process and an additional protection
against hostile environmental conditions (tropicalization) is provided as standard.
Large security factors to ensure reliability for the worst operating conditions.

Performance
Active parts are designed by using the latest technologies and the best materials available to
guarantee high efficiency values.

Approvals
The motors are designed and built in accordance with marine register rules specifications and comply
with: ABS, BV, CCS, DNV, GL, KR, LR, NK, RINA, RS.

Safety
Anti-condensation heaters are available for all frame sizes.
Wide range of sensors to monitor the temperature of the stator winding and the bearings.
Electronic equipment is available for real-time monitoring.
CTs for differential protection.

Totally customisable
All generators are completely customisable following to your requests.
Nominal voltage from 380 to 6.600 Volts.
Polarities not mentioned in the following pages are available on request.
Degree of protection up to IP 55, installing a heat exchanger.
Auxiliary and neutral point terminal boxes.
Ball, roller or sleeve bearings are available.
Prepared for vibration sensors. (Anti friction bearings only)
Three on-board neutral point current transformers (CT) are available with either single or double core.

Standards
IEC 60034-1; CEI EN 60034-1; BS 4999-5000; VDE 0530, NF 51-100, 111; OVE M-10; NEMA MG 1.22;
Insulation system UL certified (available on request).
 www.norwegianelectric.com
EXCELLENCE IN ELECTRIC

ELECTRICAL FEATURES
Power range:
100 5500kVA at low voltage
500 6800kVA at medium voltage

Frequency and Speed:

From 600 to 1500 rpm at 50Hz
From 720 to 1800 rpm at 60 Hz

Insulation and temperature rise class:

Class H insulation system.
Ratings for temp class F and H, along with standby peak ratings given in table below.

Windings and impregnation:

2/3 winding pitch to minimize the 3rd harmonic of line to neutral voltage.
All windings are vacum pressure impregnated (VPI) with high grade resin in order to withstand all expected mechanical
and electrical shocks and vibrations. A further protective treatment is applied making the generators withstand tough
environmental conditions.

Protection degree:
Generators can be supplied with protection degree from IP 23 air cooled to IP 54 with air to water heat exchanger from
framesize 250 to 800. On request.higher protection degrees can be supplied.

Exitation and regulation:

Brushless exitation with auxilliary winding or alternatively PMG. Analogue or digital AVR system built in or in separate
cabinet. Three phase short circuit current (Icc) higher than 3 times the rated current Icc 3 x In.
 MARINE APPLICATION / LOW VOLTAGE

www.norwegianelectric.com
kVA rating @ Temperature rise / Ambient temp. [C] Efficiency kVA rating @ Temperature rise / Ambient temp. [C] Efficiency Inertia Weight
Continuous duty 95 / 50 Continuous duty 95 / 50 B3
Type Leads Air to water exchanger pf = 0,8 Air to water exchanger pf = 0,8
Approx. Approx.
95 / 50 70 / 50 95 / 50 4/4 95 / 50 70 / 50 95 / 50 4/4 2
T cl. F T cl. B T cl. F [%] T cl. F T cl. B T cl. F [%] [kgm ] [kg]

4 pole 400V 50Hz - 1.500 min-1 450V 60Hz - 1.800 min-1

NEG 160 SA4 12 14,8 12,7 - 80,9 17,6 15,1 - 81,4 0,109 120
160 SB4 12 17,4 15,0 - 82,3 20,5 17,6 - 82,5 0,124 130
160 SC4 12 20,1 17,2 - 83,9 24,1 20,7 - 83,9 0,135 140
160 MA4 12 24,4 21,0 - 85,5 28,9 24,8 - 86,0 0,160 165
160 MB4 12 27,9 23,9 - 86,1 33,5 28,7 - 86,7 0,170 175
200 SA4 12 36,5 31,5 - 86,0 44,5 38,0 - 86,7 0,275 215
200 SB4 12 42,0 36,0 - 87,2 52,0 44,5 - 87,3 0,301 220
200 MA4 12 54,0 46,5 - 88,3 64,0 55,0 - 88,4 0,361 260
200 MB4 12 63,0 54,0 - 89,5 76,0 65,0 - 89,6 0,426 300
225 SA4 12 74 64 - 89,0 91 78 - 89,2 0,632 345
225 SB4 12 80 69 - 89,4 99 85 - 89,5 0,698 350
225 MA4 12 92 79 - 90,2 112 96 - 90,4 0,802 390
225 LA4 12 115 99 - 91,2 136 117 - 91,3 0,924 420
250 MA4 12 145 125 130 91,8 165 140 150 92,3 1,13 530
250 MB4 12 160 135 145 92,1 190 165 170 92,5 1,30 590
250 LA4 12 190 165 170 92,3 220 190 200 92,7 1,47 660
250 LB4 12 220 190 200 92,6 245 210 220 92,8 1,77 710
315 SA4 12 260 225 235 92,0 310 265 280 92,6 3,66 830
315 SB4 12 305 260 275 92,5 355 305 320 93,2 4,25 920
315 MA4 12 355 305 320 93,1 420 360 380 93,7 4,80 1060
315 MB4 12 390 335 350 93,5 460 395 415 94,2 5,68 1200
355 SA4 12 445 380 400 93,6 515 440 465 94,0 7,97 1250
355 SB4 12 495 425 445 93,9 590 505 530 94,5 9,29 1550
355 MA4 12 595 510 535 94,5 690 590 620 94,9 11,69 1800
355 MB4 6 695 595 625 94,8 815 700 735 95,1 13,12 2050
400 MA4 6 810 695 730 94,8 975 835 880 95,0 16,3 2250
400 MB4 6 915 785 825 95,2 1090 935 980 95,4 17,0 2300
400 LA4 6 1005 865 905 95,3 1205 1035 1085 95,6 19,3 2550
400 LB4 6 1135 975 1020 95,6 1345 1155 1210 95,8 22,5 2800
450 MB4 6 1310 1120 1180 95,9 1505 1345 1355 96,4 29,0 3200
450 LA4 6 1440 1235 1295 96,0 1655 1480 1490 96,4 34,0 3600
450 LB4 6 1615 1385 1455 96,2 1855 1660 1670 96,5 38,0 4000
500 SC4 6 1680 1445 1515 95,7 1940 1665 1745 95,9 46,7 4000
500 MB4 6 1920 1650 1730 95,9 2210 1895 1990 96,1 52,5 4400
500 LA4 6 2180 1870 1960 96,1 2570 2205 2315 96,3 61,5 5100
560 MA4 6 2405 2065 2165 96,3 2700 2320 2430 96,3 83 5200
560 LA4* 6 2865 2460 2580 96,5 3220 2765 2900 96,5 95 5700
630 SA4* 6 2770 2380 2490 96,3 3190 2740 2870 96,4 117 6350
630 MA4* 6 3000 2580 2700 96,5 3450 2960 3110 96,6 140 7000
6 pole 400V 50Hz - 1.000 min-1 450V 60Hz - 1.200 min-1
NEG 400 SA6 6 350 300 315 92,7 415 355 375 92,9 11,8 1450
400 SB6 6 390 335 350 93,0 465 400 420 93,3 14,1 1600
400 SC6 6 435 375 390 93,7 515 440 465 93,9 16,8 1800
400 MA6 6 540 465 485 94,1 640 550 575 94,3 17,9 2200
400 MB6 6 610 525 550 94,3 725 620 655 94,5 19,4 2260
400 LA6 6 695 595 625 94,6 825 710 745 94,8 20,9 2530
400 LB6 6 845 725 760 94,8 1000 860 900 95,0 24,2 2750
500 SA6 6 915 785 825 94,6 1085 930 975 95,1 50,5 3200
500 SC6 6 1160 995 1045 95,0 1375 1180 1240 95,5 64,7 3800
500 MB6 6 1395 1195 1255 95,2 1655 1420 1490 95,7 73,6 4400
500 LA6 6 1630 1400 1465 95,4 1930 1655 1735 95,9 88,9 5100
560 MA6 6 1785 1530 1605 96,0 2035 1745 1830 96,0 115 5200
560 LA6 6 2125 1825 1915 96,2 2445 2100 2200 96,2 135 5700
630 SC6 6 1890 1620 1700 95,7 2180 1870 1960 96,3 170 7000
630 MA6 6 2260 1940 2030 95,7 2610 2240 2350 96,3 190 7500
630 LA6 6 2680 2300 2410 96,5 3090 2650 2780 96,8 230 8100
710 SC6* 6 2860 2460 2570 96,0 3210 2760 2890 96,3 on request
710 MA6* 6 3330 2860 3000 96,7 3720 3190 3350 96,7 on request
8 pole 400V 50Hz - 750 min-1 450V 60Hz - 900 min-1
NEG 400 SA8 6 210 180 190 91,6 250 215 225 91,9 13,5 1450
400 SB8 6 270 230 245 92,1 330 285 295 92,4 16,2 1600
400 SC8 6 315 270 285 92,4 370 320 335 92,7 19,1 1800
400 MA8 6 375 320 340 92,6 445 380 400 92,9 20,6 2200
400 MB8 6 445 380 400 93,1 525 450 475 93,4 22,4 2260
400 LA8 6 525 450 475 93,3 620 530 560 93,6 24,1 2530
400 LB8 6 645 555 580 93,6 765 655 690 93,9 25,4 2750
500 SA8 6 715 615 645 94,6 845 725 760 95,0 55,1 3200
500 SC8 6 890 765 800 95,1 1055 905 950 95,4 74 2 3800
500 MB8 6 1105 950 995 95,2 1310 1125 1180 95,5 82,2 4400
500 LA8 6 1310 1125 1180 95,3 1550 1330 1395 95,8 95,0 5100
560 MA8 6 1395 1195 1255 95,6 1605 1380 1445 95,6 130 5200
560 LA8 6 1665 1430 1500 95,9 1915 1645 1725 95,9 155 5700
630 SC8 6 1430 1230 1290 95,4 1640 1410 1480 96,2 160 7100
630 MA8 6 1710 1470 1540 95,9 1970 1690 1770 96,4 190 7500
630 LA8 6 2260 1940 2030 96,1 2610 2240 2350 96,5 240 8200
710 SC8 6 2540 2180 2290 96,3 2850 2450 2570 96,5 on request
710 MA8* 6 2960 2540 2660 96,5 3310 2840 2980 96,7 on request
710 MB8* 6 3190 2740 2870 96,6 3570 3060 3210 96,8 on request
710 LA8* 6 3780 3240 3400 96,7 4234 3630 3810 96,9 on request
10 pole 400V 50Hz - 600 min-1 450V 60Hz - 720 min-1
NEG 500 SA10 6 520 445 470 94,0 645 555 580 94,5 57,0 3300
500 SC10 6 650 560 585 94,3 815 700 735 94,7 67,0 3800
500 MB10 6 760 650 685 94,8 915 785 825 95,2 85,0 4500
500 LA10 6 840 720 755 95,1 1055 905 950 95,5 102,0 4900
630 SC10 6 1040 890 940 95,1 1200 1030 1080 95,4 140 7300
630 MA10 6 1240 1060 1120 95,5 1420 1220 1280 95,8 160 7700
630 MB10 6 1460 1250 1310 95,6 1680 1440 1510 95,9 180 7900
630 LA10 6 1520 1300 1370 95,8 1760 1510 1580 96,1 210 8200
710 SC10 6 2140 1840 1930 95,9 2390 2050 2150 96,3 on request
710 MA10 6 2570 2210 2310 95,9 2880 2470 2590 96,3 on request
710 MB10* 6 2740 2350 2470 96,4 3070 2640 2760 96,7 on request
710 LB10* 6 2960 2540 2660 96,4 3315 2850 2980 96,7 on request
*: 690 V recommended
Ratings refer to the following conditions: balanced non-deforming load, minimun power factor 0,8.
SIN.CT.024.8 GB

CONTACT :: [email protected] :: www.norwegianelectric.com :: Phone: +47 55 61 30 00